[Q] [SOLVED] Android One bricked. Unable to even start the phone. Help pls... - Micromax Canvas A1

Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance

Problem solved!
Actually, I had used an old version of SP Tools which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
First, Install VCOM drivers for MTK devices..
Then install Android CDC Gadget Drivers.
Download the KitKat stock ROM.. (See instructions there)
Use SP Flash Tools v5.1424 from there to download it.
Use both 'download' and 'firmware upgrade' modes to flash.
Other issues after flashing:
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted KitKait using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA

GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
btw micromax service center isnt asking a word even if you have a custom rom..actually may be they are so dumb that they cant find it if its unlocked or not

GokulNC said:
Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Click to expand...
Click to collapse
just flash the stock backup via SP flash tool

Same problem did u find any solution for it yet ?

Press power button and and the volume button up at the same time and restore everything that how you can fix it or use a computer to fix it

Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up

aayan007 said:
Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up
Click to expand...
Click to collapse
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548 (This is the latest version & highly recommended)
Use both 'download' and 'firmware upgrade' modes

GokulNC said:
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548
Use both 'download' and 'firmware upgrade' modes
Click to expand...
Click to collapse
I did it after download hit firmware upgrade it shows failed to get pmt info ????

aayan007 said:
I did it after download hit firmware upgrade it shows failed to get pmt info
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showpost.php?p=45780613&postcount=2

Thnx bro that may help me but i don't how to connect my phone on Meta mode to pc yet

unable to switch on mobile
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help

can you tell us how to get into META MODE....??

GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
i also have same problem. still facing the same problem after followng your instruction. help me please
---------- Post added at 07:55 AM ---------- Previous post was at 07:55 AM ----------
harkirat singhh said:
can you tell us how to get into META MODE....??
Click to expand...
Click to collapse
power botton+vol up
---------- Post added at 07:56 AM ---------- Previous post was at 07:55 AM ----------
nilesh15 said:
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help
Click to expand...
Click to collapse
same problem im also facing, if you get solution please let me know,

Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools

DarkSJ1998 said:
Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools
Click to expand...
Click to collapse
Check this:
http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150
All links and procedure is given there

GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
Will this work when i can't mount/cache

I am having the same issue formated it first with download only option then it stuck on micromax logo so I flashed it again with format all+ download and from then its not starting up. pls help

hi i am also having same problem can guys please help me

Didnt Helped me...
ive bricked my phone via flashtool while i was flashing a rom but it didnt flashed via download method, so i tried format + download and that formatted my device but didnt downloaded the rom...
now it just shows installing driver while i connect to pc and is detectable by flashtool but the device shows nothing...
everytime i try flashing a new rom via flashtool it shows illegal as the roms were third party...
please suggest me a rom that is stock and that not show illegal while flashing...
Thanks in Advance...

Related

[Q] [SOLVED] Canvas A1 bricked. Unable to even start the phone. Help pls...

Recently, I tried to install a custom ROM of Android L (beta), which bricked my device.
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Problem solved!!
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Thank You Very much Bro
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse

[Q] Recovery mode

History : i've been using an earlier pre-rooted rom for this device and after having taking care of unrooting it, i tried the OTA Update to upgrade and access the TWSP and Garbage rom.
My issue is that as i access the phone in fastboot mode with fastboot and adb i can't acces the recovery mode : the phone reboot to fastboot.
Any hint appreciated
Manuel
Have you tried rerooting and flashing a recovery again?
Sent from my SGH-T599N using XDA Forums Pro.
lowvoice said:
Have you tried rerooting and flashing a recovery again?
Click to expand...
Click to collapse
Rooted again with "cai_dat_CWM" (root ok)
Flashed with fastboot flash recovery twrp.img (transfert ok)
same issue after selecting recovery mode
is the unlock available in 2.15.40.13 ((2015/05/06) ?
U need to unlock ur bootloader first to flash permanent TWRP
Sent from my ASUS_Z008D using XDA Free mobile app
yakub234go said:
U need to unlock ur bootloader first to flash permanent TWRP
Click to expand...
Click to collapse
According to http://forum.xda-developers.com/zenfone2/general/congrats-to-bootlocker-unlocked-t3138547
Step 1 to unlock is Update to 2.19.40
I'm on 2.15.40.13 and the OTA fails at the fastboot menu
http://forum.xda-developers.com/zenfone2/orig-development/rom-pre-root-img-t3079590/page51
I forgot this was a pre-root system.img file as explained, no stock system.img provided
I think the recovery limitation was made on purpose to avoid bootloop after OTA.
Looking for stock rom to flash via fastboot
Fixed :
Used cai_dat_CWM Tethered to flash stock rom from Asus Website
UL-Z00A-WW-2.19.40.18-user.zip from Asus Website
Then again to root with SuperSU246 update from zip

[Right method to unlock bootloader]Unlock_Bootloader Tool for Zenfone 5 by XHook v1

After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions​
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------​
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Can i know someone here who is having the No camera problem,have u tried this ?
By the way,is this method unlock bootloader without No camera problem?
Lokcies said:
Can i know someone here who is having the No camera problem,have u tried this ?
By the way,is this method unlock bootloader without No camera problem?
Click to expand...
Click to collapse
I had this problem and this method worked
awesome, I'll try it
XHook said:
I had this problem and this method worked
Click to expand...
Click to collapse
Bro i am realy excited to hear that,but i don't have the access to download the file,can u please confirm my email ?
wanhasniza******@gmail.com
Lokcies said:
Bro i am realy excited to hear that,but i don't have the access to download the file,can u please confirm my email ?
wanhasniza******@gmail.com
Click to expand...
Click to collapse
updated link, sorry for the mistake
I use the STOCK ROM 0.78 ww
I'm with the unlock bootloader problem even in rom stock.
I lock bootloader again, and then use that?
It only works if you use custom rom? Or also in stock?
Sorry my bad English, I am Brazilian.
Zenfone 5 a501cg - 1.6 Ghz
Victor Soares said:
I use the STOCK ROM 0.78 ww
I'm with the unlock bootloader problem even in rom stock.
I lock bootloader again, and then use that?
It only works if you use custom rom? Or also in stock?
Sorry my bad English, I am Brazilian.
Zenfone 5 a501cg - 1.6 Ghz
Click to expand...
Click to collapse
The bat file it blocks before unlocking is only put in fastboot and run the file without fear.
:laugh:
May i know,if.bin and dnx version u use for this UBL Tools?
Sent from my ASUS_T00J using Tapatalk
XHook said:
The bat file it blocks before unlocking is only put in fastboot and run the file without fear.
:laugh:
Click to expand...
Click to collapse
tried this method but my camera is still doesnt work...how do i get my camera back
still freezing
XHook said:
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions​
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------​
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Click to expand...
Click to collapse
no working for me, plz fix error
Victor Soares said:
still freezing
Click to expand...
Click to collapse
Same here...
XHook said:
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions​
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------​
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Click to expand...
Click to collapse
After I used it with Lollipop droidboot ww t00j stock .78 I had problems with camera. It works only with kitkat?
@ XHook
have you worked on method to re-lock bootloader..
bricked my bootloader
After flashing this I couldn't access my fastboot. Now I can't even boot to system. I'm stuck at the USB logo, where usually I could reboot to fastboot (via pressing Power & Vol +) to fix this. But now I can't even access fastboot. When I press Power & Volume Up, it shows a battery icon. Please do help @XHook.
Editted:
Sorry for panicking back there. I forgot the reboot to recovery way using Power & Volume down. At least I can still boot to my system. I'll try to find a DIY solution for this. Sorry for panicking, @XHook.
Your tool uses Fastboot of 4.3 version right? Is that the difference?
no more update? camera not found, can this method by xhook solve the problem?
i've tried this version, but make my bootloader missing/bricked, same with ezrawk post
Note : When I installed this version >> 3.24.40.87 latest stock lollipop firmware
@XHook, tell me what your firmware version when you install this UBL method.
Thanks
ezrawk said:
After flashing this I couldn't access my fastboot. Now I can't even boot to system. I'm stuck at the USB logo, where usually I could reboot to fastboot (via pressing Power & Vol +) to fix this. But now I can't even access fastboot. When I press Power & Volume Up, it shows a battery icon. Please do help @XHook.
Editted:
Sorry for panicking back there. I forgot the reboot to recovery way using Power & Volume down. At least I can still boot to my system. I'll try to find a DIY solution for this. Sorry for panicking, @XHook.
Click to expand...
Click to collapse
I have the same problem. How did you fix it?
serihan said:
I have the same problem. How did you fix it?
Click to expand...
Click to collapse
I was using a custom recovery (TWRP) at that time so I flashed a fastboot via install. If you aren't using a custom recovery, you'd probably want to check this out: Zenfone 5 A500CG, Zenfone 6 A600CG Last chance to debrick (This fix youre IMEI) by swiczak
About the flashable fastboot, try searching for it in the Help & Troubleshooting part, I think the user who upload the flashable fastboot zip was tank0412. Try PM-ing him. Sorry can't help you about this 'cause I forgot where I saved mine.
Goodluck!

Zenphone 2 4 giga ram bricked

Hi, my phone stuck on asus logo.
I can get to cmw tempairy recovery, ithink
When. Install the firmware from asus site, its says cant verify
Failed to verify whole file signature.what shuld i do pleaae?
Okay, not enough information, since you are using cwm temporary I am guessing you have not unlocked your boot loader which will cause the fail, can you get into the bootloader?
If you can follow the instructions and download the current rooted Rom and follow instructions to flash the stock rom
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 07:58 PM ---------- Previous post was at 07:57 PM ----------
Oops sorry you'll find the Roma in the change from CN to WW thread
Sent from my ASUS_Z00AD using Tapatalk
Hi, i didnt understand, i try to install the rom with cn, same problem.and i dont know if the device is rooted.where do i download rooted rom?
bennnnnn said:
Hi, my phone stuck on asus logo.
I can get to cmw tempairy recovery, ithink
When. Install the firmware from asus site, its says cant verify
Failed to verify whole file signature.what shuld i do pleaae?
Click to expand...
Click to collapse
You can't flash asus firmware with cwm.
You can unbrick with adb sideload.
See THIS GUIDE how to sideload
I am done here, if you choose to follow advice to try using temp cwm to fix your phone I am sure you fail, your best solution is to use bootloader to flash, everything you need is in this thread, if you choose not to do the proper research before you start flashing things without doing the proper research before then you are beyond help here.
Sent from my SM-T710 using Tapatalk
jimchee said:
I am done here, if you choose to follow advice to try using temp cwm to fix your phone I am sure you fail, your best solution is to use bootloader to flash, everything you need is in this thread, if you choose not to do the proper research before you start flashing things without doing the proper research before then you are beyond help here.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
hi, i used the toutorial
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
install the IntelSocUSB ' and all the drivers,but pc doesnt detect the phone.it make the noise to search for usb and say searching for MOOREFIELD, but failed. i try several cabels,. what can i do please? im stuck
Can someone please help me?
Re
I manage to get the pc detect asus android adb
Try to install stock firmware but get error.how can i fix it please?
can u boot into fastboot mode
yes
yakub234go said:
can u boot into fastboot mode
Click to expand...
Click to collapse
it says in device manager " asus android bootloader interference"
and in the phone its says normal boot and there is icon of open android/
and it written in blue "continue the fast boot process
try "fastboot devices"
if it answers than try flashing twrp or stock recovery
command to flash recovery "fastboot flash recovery filename.img"
after that u can try to flash custom rom using twrp or stock rom via twrp or stock firmware using adb sideload
I manage to make it work and install cm 13 the latest nightly.but when I make a call or receive one the phone reboots itself. What is the problem? Thanks
try factory resetting it
bennnnnn said:
Hi, my phone stuck on asus logo.
I can get to cmw tempairy recovery, ithink
When. Install the firmware from asus site, its says cant verify
Failed to verify whole file signature.what shuld i do pleaae?
Click to expand...
Click to collapse
In this method you can Unbrick 551ML..
goo.gl/wrhmdb
bennnnnn said:
it says in device manager " asus android bootloader interference"
and in the phone its says normal boot and there is icon of open android/
and it written in blue "continue the fast boot process
Click to expand...
Click to collapse
That's fastboot mode
Sent from my ASUS_Z00A using Tapatalk

D855 - Whats the best way to return to totally stock?

I've got a D855 that was bought in the UK and has been rooted using Kingroot and has TWRP installed with a patched bootloader. I now want to return the device to totally stock (Don't trust kingroot), i.e wiping and re flashing ALL partitions .
What would be the best way to do this:
LG Mobile Support tool
LGUP
LG flash tools v1.8
LG flash tool 2014
Some other method
EDIT: Is it possible to retain TWRP
Any help is much apprecitaed
Xylynx said:
I've got a D855 that was bought in the UK and has been rooted using Kingroot and has TWRP installed with a patched bootloader. I now want to return the device to totally stock (Don't trust kingroot), i.e wiping and re flashing ALL partitions .
What would be the best way to do this:
LG Mobile Support tool
LGUP
LG flash tools v1.8
LG flash tool 2014
Some other method
EDIT: Is it possible to retain TWRP
Any help is much apprecitaed
Click to expand...
Click to collapse
Kingroot provides temporary root ..
Download supersu zip and permissive kernel zip
https://drive.google.com/file/d/0B1BuG90z-Y4AMTlVT2F6NWxKYUU/view?usp=drivesdk
https://drive.google.com/file/d/0B1BuG90z-Y4AcjV0bzRZWVFqZ0E/view?usp=drivesdk
Boot in twrp...flash the permissive zip...reboot to system....boot again to twrp ..flash supersu zip and reboot again ....done ..
No need to unroote your phone....
Sent from my LG-D855 using XDA Free mobile app
This interests me as I am on Fulmics 6.6 and I want to return to stock as I have to send the phone for warranty.
Xylynx said:
I've got a D855 that was bought in the UK and has been rooted using Kingroot and has TWRP installed with a patched bootloader. I now want to return the device to totally stock (Don't trust kingroot), i.e wiping and re flashing ALL partitions .
What would be the best way to do this:
LG Mobile Support tool
LGUP
LG flash tools v1.8
LG flash tool 2014
Some other method
EDIT: Is it possible to retain TWRP
Any help is much apprecitaed
Click to expand...
Click to collapse
This should sort you out http://forum.xda-developers.com/showthread.php?t=2785089
Sent from my LG-D855 using XDA-Developers mobile app
Thank you everyone for your help. In the end I decided to go with LG UP to return to complete stock (lollipop) and then used one click root and auto rec to re-install TWRP. However during this processes I managed to hard brick my phone by corrupting laf (download mode) and I actually managed to recover it without opening the device and shorting pins as would usually be required!
How I recovered by hardbricked D855
Hold the volume up button and plug the phone into the computer. In my case the phone tried to enter download mode (shows the screen with the text "Download mode" and several dots
This process will fail as there is no download mode to load and the phone screen with go black. Wait around 20 seconds and then press the Volume Up button again
Windows will now detect the phone as a high speed Qualcomm device and willcrackers recovery instructions can be followed to install drivers and recover the device
I'm not sure if this will work on all devices as software versions (if it does i'll be amazed) but if anyone is unfortunate to brick there device giving this ago first may help.
Thanks again and I hope my tip can help someone!

Categories

Resources