Hi.
I am unsure if my phone is unlocked and can proceed with porting my number over to Metro PCS. Please help me with advice how to proceed. I decided to move my service to Metro PCS since they are now a Tmobile company and after lots of research, I found that I can use my current phone/software as long as it was unlocked. I recently purchased my Galaxy s4 second hand and assumed it was not unlocked. I had immediately rooted it and flashed a new rom (Insane Kitkat 4.4.4). The phone has been working well. I already have requested and have my unlock code from Tmobile.
When I went to the Metro PCS store to port over my number, the phone did not request an unlock code when inserting their Metro PCS sim card (not activated). They said that my phone may already be unlocked or that it may not need to be unlocked since Metro is now owned by T-mobile. They stated that it may work if they go through the entire registration process, port over my number and activate it but that it would be a gamble. If it did not work, then I would not be able to go back and reactivate my sim immediately with Tmobile since it would then be in deactivated status with them.
I tried to find out if it is already unlocked by *#7465625# but my phone will not run this or any other USSD codes to verify. I keep getting errors when trying any USSD codes. A message says 'USSD code running' then "unable to process request".
A friend of mine has an activated Galaxy S4 on Metro PCS and I tried inserting her sim card to prompt for the unlock code but my GS4 just booted normally then showed 'not registered on network'. It did, however, have cellular signal bars. When I inserted my Tmobile sim into her GS4 it did ask for the unlock code normally.
I am at a loss now..
funny, I like to know if there is a way to check carrier unlock status for simcard without having to put a simcard in.
T-Mobile phones work with metropcs without the need to unlock
Could the custom rom be suspect?
Maybe need a stock rom to get carriers sorted out, then go to custom roms.
Pp.
serio22 said:
T-Mobile phones work with metropcs without the need to unlock
Click to expand...
Click to collapse
I ended up contacting Tmobile and they stated that the phone showed unlocked status already but I think you are correct. I wasn't aware they could tell me this. It was very fast and super easy to find out.
I have the phone working great on Metro PCS now. USSD codes still failing though...
Related
hey guys.. i bought valid unlck code for my imei for my device..but directions i got to do the unlock were very vague...i inserted a working non accepted at and t sim...but cant get prompt to enter unlock code...ive tried everything...can anybody help me?/// ive got sgs2 t989...anybody have tips to get it to say "enter sim unlock code?"...im dying to unlock...im currently running on tmobile MONTHLY 4g...id love to switch if i ever need to to AT+T or simply mobile....but cant seem to get it to promptfor the code...is there anyway to do it without using somebody elses non working activated sim?...im ertain my unlock code is good...just cant get to where i enter it...one time i think i did...it just says no mobile network...any help is GREATLY appreciated..thanks!!!
You're gonna need another sim to do it.
used good att sim it did nothing
i used my brothers att sim straight outta his phone...it did nothing...??
I have a European I9100 and a t-mob T989 (both gs2) and swapped the at&t and t-mob Sims they both phones worked. However the network features were non existent.
So i just received the unlock code from at&t and id like to unlock the phone. but i dont have a non att sim. reason being, im going to try and get rid of the device and would like it unlocked prior. that way everything is done and they can just stick in there sim and go.
ive tried the few codes att gave me and no go.
all else fails i will just print out the text where at&t texted me the code. just would like it done before.
thanks in advance!!
You need a SIM from a different carrier to use that method. Also, check out this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Hello,
Today I bought a Note 2 on Craigslist. Since it was from TMobile I though it was only a matter of putting my sim card in the phone and it would work, I was wrong. The person that I bought the phone from gave me an unlock code that he got straight from T-Mobile, however when i used my sim card the phone didn't ask me for the code, so I assumed it was already unlocked.
I called Metro PCS to replace my current phone (LG optimus 9) with the Note 2, they tried using the IMEI number and they told me that there was a problem, that they couldn't activate the phone, and that I had to go to a T-Mobile store. I went to the store, they checked the IMEI and they say it was fine, the guy also told me that the unlock codes are only valid for 72 hours and the person who sold me the phone requested the code on 01/17/14 which means the code its no longer valid.
After that I tried calling Metro to get the phone activated, it didn't work...
I thought that maybe the phone was still locked so I did a downgrade to 4.1.1 - UVALJ1 (the phone was rooted and it had a 4.3 custom rom) and unlocked the phone using the method of that "secret" menu. I tried using the Metro sim card, no luck. At this point I dont know what else to do, a T-Mobile sim card works fine, I haven't tried with another carrier, however I've been using my Metro sim card in my L9 with no problem, so I don't see why it shouldn't work with the Note 2.
So my question is if anybody has tried using the Note 2 on metro, specifically a T-Mobile one, and if so, how did you make it work?
I am pretty new to all of this rooting and android stuff, but I have done as much research as possible before asking, this is my last resource so hopefully someone can help me. Thank you in advance.
Update: After trying multiple times to activate the phone on Metro PCS it turns out the phone appears on their database as it hasnt been paid in full and theres an unpaid equipment installment balance, that is only on Metro PCS database. I went to T-Mobile and everything was fine on their system, no blacklisted, no unpaid balances, no nothing so I activated the phone with them. Now hopefully the guy who I bought the phone from doesnt decide to report the phone as stolen or lost just to be an ahole.
Im on android 4.1.1 and I want to upgrade but my phone its telling me that I cant upgrade because my phone was modified. I want to upgrade to 4.3 but I dont know if I lost root when I downgraded to 4.1.1, how can I check if im still rooted and what rom do you guys recommend flashing? Thanks in advance
-- Thread can be closed, already rooted, upgraded and de-bloated.
Phone: SHG-I317
Carrier: AT&T
Current Firmware: 4.1.1
Hey guys, I purchased this phone and have yet to officially activate it. I downgraded from 4.1.2 so that I could unlock it to work on other networks. I did the unlock procedure and I attempted to put in a METRO PCS Sim card but I get: Phone not allowed mm#6. The phone is not blacklisted as Ive checked numerous sites online and even went to a AT&T store and they were able to pop a AT&T Sim card in and it worked just fine.
I tried to search this issue but the only thing I can come up with was that it could possibly be blacklisted but Ive ruled out that possibility for now.
Could it be that the unlock was unsuccessful and I need to do it again? But then how am I supposed to know that it was successful without another carriers sim card? is there something that changes in the settings or something?
Thank you very much for your help.
http://forum.xda-developers.com/showpost.php?p=51349788&postcount=4
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Akosp said:
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Click to expand...
Click to collapse
Are you sure the phone is locked to AT&T? You title says "Unlocked HTC 10....". Your device could already be unlocked. Also, which sim card are you inserting and expecting code prompt to appear?
This is how it is normally done:
Lets say your device is locked to AT&T at the moment. You have to put another carrier's sim card(T-Mobile for example), then the code prompt should appear on the screen asking for the code.
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Wonders_Never_Cease said:
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
Click to expand...
Click to collapse
yeah I didn't know they did simlock either but I guess when you use a phone on their network it does.
when I tried to activate on sprint they said I had to take care of the att lock first. I have the unlock code but no idea where to use it. do I need to do something through the dialer?
Put Sprint sim in the device boot it up... IF theres a lock on the sim slot, it should ask for an unlock code which is input through the dialer when prompted
Akosp said:
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Click to expand...
Click to collapse
If device was bought from htc.com, then it should be unlocked already. I believe the radio frequency in your phone may not be fully compatible with Sprint.
Just check HTC's website and you will see that they offer separate models for Verizon and Sprint. - http://www.htc.com/us/go/buy-htc-10/
For example I have a T-Mobile service, so I purchased an unlocked HTC 10 which is compatible with AT&T as well. If I would have another carrier, such as Verizon or Sprint, then I would choose accordingly.