Develop Bugs

Flashing I9000DXJF5 firmware..

Im using I9000DXJF4 (Asia) firmware atm and now samsung-firmware.webs.com has released I9000DXJF5(Europe) so..
Is it worth the upgrade? Why there is no change log or some sort of information provide at all?
I just dont wanna brick my $900 :-S
Oh.. and do I need to root the phone first before flashing firmware?

hey i flashed from the singtel firmware too. no need to root before flashing. just follow the instructions given on the fw website. should not brick if you do it correctly
cheers

twit_xp said:
hey i flashed from the singtel firmware too. no need to root before flashing. just follow the instructions given on the fw website. should not brick if you do it correctly
cheers
Click to expand...
Click to collapse
Yeah but I'd like to know the changes first. I dont wanna risk it before I even know what I put in it.

just flashed jf5 , system is faster and more stable . market speed increased a lot !
with odin bricking the device is quite impossible... i suggest flashing

zomg just flashed to jf5 and i booted with some language (russian or something) any idea how to switch it back to english?
edit: nevermind stuck my sim card in and it went to english automatically lol

twit_xp said:
zomg just flashed to jf5 and i booted with some language (russian or something) any idea how to switch it back to english?
Click to expand...
Click to collapse
Did you flash with the included CSC? i believe the CSC is still F3..

daduzzo888 said:
just flashed jf5 , system is faster and more stable . market speed increased a lot !
with odin bricking the device is quite impossible... i suggest flashing
Click to expand...
Click to collapse
This sounds good, did you come from F4 firmware before the upgrade?

Ferdimage said:
Did you flash with the included CSC? i believe the CSC is still F3..
Click to expand...
Click to collapse
yup i used all the 3 included files for the flash

what are you guys using to backup your apps and contact, email etc before flashing?

Can you see with the new JF5 version non-free Apps in market?

Can anyone tell me, does flashing these updated firmwares void your warranty?
The firmwares seem official, but also i guess not official as they are not available directly from samsung?

Odin
In odin after clicking start i see
<ID:0/018> Added!!
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
How long does file analysis take? because mine is busy for 15 minutes now

krotwijk said:
In odin after clicking start i see
<ID:0/018> Added!!
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
How long does file analysis take? because mine is busy for 15 minutes now
Click to expand...
Click to collapse
Odin and your phone are not connected correctly. It should fly....
Are you using Windows 7 64bit?
You should try to connect your phone to your pc and then try to boot your phone in to download mode.

kimatrix said:
Odin and your phone are not connected correctly. It should fly....
Are you using Windows 7 64bit?
You should try to connect your phone to your pc and then try to boot your phone in to download mode.
Click to expand...
Click to collapse
yes, windows 7 64 bit.
this fixed it.
I've assigned the
CODE_I9000XWJFB.tar to PDA
CSC_I9000SERJF3.tar to CDC
MODEM_I9000XXJF5.tar to Phone
After reboot, the sim card must be in the phone, otherwise i had russian language
But samsung apps is still in russian and the sim unlock screen too instead of dutch
After setting the apn to vodafone the sim unlock screen is dutch language, but samsung apps not

krotwijk said:
yes, windows 7 64 bit.
this fixed it.
I've assigned the
CODE_I9000XWJFB.tar to PDA
CSC_I9000SERJF3.tar to CDC
MODEM_I9000XXJF5.tar to Phone
After reboot, the sim card must be in the phone, otherwise i had russian language
But samsung apps is still in russian and the sim unlock screen to instead of dutch
Click to expand...
Click to collapse
Can you get another CSC from another firmware that has Eng,
Im gonna flash it alter tonight but i will leave the CSC as is...

mine is stuck at
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.rfs

discophil said:
Can anyone tell me, does flashing these updated firmwares void your warranty?
The firmwares seem official, but also i guess not official as they are not available directly from samsung?
Click to expand...
Click to collapse
bump! .

it will be good if we can see some change logs...

Wow flashing was easy as, thanks to guides and peoples feedback, very happy with the falsh all my apps msg etc are intact, just settings have changed.. JF5 is a good update my phone feels 10% quicker

@discophill As long as you reflash the FW that shipped with your phone before sending it in, the peeps at Samsung should not be able to tell that you meddled with it in the first place =D

NTT Docomo Galaxy Note II SC-02E Root Japan

Status on Ntt Docomo Note SC-02E
Q&A
Q:How can I unlock the SC-02E?
A:Through Docomo around 3500 yen or The free unlock works!!!! (Tested by octa_amide ) Thanks Look below in Useful links
Q:Where can I find original SC-02E firmware if I need to return the handset for service?
A:In my signature Xda share drive :Stock Docomo 4.1.1 JB
Q: What is the current version firmware?
A:SC-02E Japan- 2013 November- 4.1.1- SC02EOMAMK1- SC02EDCMAMK1 Root still works!!
Q:Will I lose NFC TYPE payment example edy, Felicia,suica?
A:Yes and No: Yes you will lose if you stay on a custom recovery like CWM.No if you place your stock recovery back to the original.
Q: Does 1 seg digital mobile TV work?
A:Yes on stock docomo or Rob's Detoxed Rom(links coming soon)
Q:Is there a ROOT ?
A:Yes ROOTED
Root Kit Files
Q:Can i install CWMR or TWRP ?
A: Yes if you flash using odin or download TWPR from the website TWRP will work I tested it
Q:Will the CF Yellow triangle reset work?
A: Yes! Use just for Resetting binary count only !! Reset binary count Kit
Q: Can you do a wireless charge mod on this phone ?
A: "No" there is no easy way I could think of Look at these pictures I took when I took apart my device.
Q:Can I silent the Camera Shutter sounds?
A:Yes look here warning this may be illegal in some countries
Q Will the multi hack mod work?
A:Yes Tested by Robobob1221 Link here
Robobob1221 :Useful Link
Credit to g.lewarne for the ramdisk scripts/setup from his note2core kernel Robobob1221 for the zimage swap and Vipsavior walking on the darkside 55+counts trial and error HaHa .
Mskips Note 2 Tool kit,ChainFire's Triangle app & SuperSU.99, and the people that been with us from the start.

How to root the sc02E Docomo
IN 720P !!!!! also
Its not a Hollywood video but it should work

Thanks for the progress report.
I've just got it yesterday as well, and can't wait for a way to root it properly!
I will probably do some tests in the next days as well.
vipsavior said:
Well I dove in and installed CWMR and backed my stock rom by using this method below.
This method is for OSX mac, but there is a odin version also
http://galaxynote2root.com/galaxy-note-2-root/how-to-root-galaxy-note-2-on-mac-osx/
So i achieved CWMR and backed up my rom than I tried the root but its a no go. SU is installed but i receive a message "There is no SU binary installed and SuperSu cannot install it"
Now i don't know if this same method is needed below for the note 2 as it was needed for the Docomo S3 version
http://forum.xda-developers.com/showthread.php?t=1895737
If you read on the bottom of the post It states that the orginal recovery needs to be installed in order to use
beware this will raise your binary count
CWM recovery installed instead of the stock_recovery, then many of the SC-06D's functions will not work. The stock_recovery MUST be flashed/installed everytime before booting into Android
Click to expand...
Click to collapse

Still no luck,but getting there
Well I been looking all day for a root or progress of a root in japanese forums ,but i still had no luck .I restored my phone back to the stock binary and now i am able to receive updates via OTA and use NFC payments.While i was doing that i went and did a little digging and looked at busy box on my phone and it said it was rooted .I also looked up the message in SU "There is no SU binary installed " From looking at a few threads it seems that a little fix or patch is needed so hopefully it will not be long before we get a root.I also sent Chainfire a post for a CF-Auto root support.I know the man is busy ,but hopefully he will come through we just need to be patient. If you would like the stock JB 4.1.1 (1.57 GB)File its is being upload now in my shared xda drive below .I extracted the modem and recovery also .We might need this later for rom flashing .

`NOTE: If you want your carrier added to the Toolkit then download and install, flash CWM Recovery and make a NAND Backup (changing the backup format to 'tar' first). Send me the boot.img file and I will root and add it.'
If you've made a NAND Backup...
If you send (link) the NAND Backup (changing the backup format to `tar' first), to mskip then hopefully he will add NttDocomo to the Toolkit (as above).

Tried ,but no dice counter on 9 flashes lol
Yes i did the same way as in the video but i think japanese SGS 3+ phones do not auto recovery .It is very similar to the JP Gs3 awaiting chain fire to respond or tweak the CF auto root.

Nice to hear from fellowuser of note 2 in japan.
Me too, trying hard to root but no luck.
Only manage to odin an insecure boot into my phone. Made it myself based on information from the net.
So far no problem yet.
Asking expert for help now.
Let's keep each other updated.
Sent from my SC-02E using xda app-developers app

Also wait for way to root my note 2 as well.:highfive:

Well i just made a new Nand back last night after i got off work .I will send it to Mskip today .
Sent from my SC-02E using xda app-developers app

Yeah. I'm keeping an eye on the threads. I prefer to risk it at weekends, when I have more time. Good job for trying so far..

$Donation$ in exchange Root Docomo note 2 SC-02E
Well after long hours of trying different ways to get the root I was unsuccessful.So I am going to sweeten the deal with the first person to root a NTT Docomo SC-02E Note 2 a donation of $50 via Paypal from me for your hard work.If you need the boot.img ,NAND back up or stock Rom please let me know .I have gone as far as clockwork mod recovery installed on the device and installed SU but super user cannot find the binary.
Hope someone can answer the call because i am itching like a drug attic trapped in a cube with no doors.

vipsavior said:
Well after long hours of trying different ways to get the root I was unsuccessful.So I am going to sweeten the deal with the first person to root a NTT Docomo SC-02E Note 2 a donation of $25 via Paypal from me for your hard work and for a added bonus I will throw another $25 on top if its done in the next 3 days from this post so $50 total.If you need the boot.img ,NAND back up or stock Rom please let me know .I have gone as far as clockwork mod recovery installed on the device and installed SU but super user cannot find the binary.
Hope someone can answer the call because i am itching like a drug attic trapped in a cube with no doors.
Click to expand...
Click to collapse
Hi VipSavior,
I had already send the stock ROM to one of the experts for help to pre-root it.
Just got them back.
2GB file just finished downloading.
Took me one whole day to download. (in office)
Will updated you when I am free to Flash.(maybe tonight)
Just wait for a while.........

I sent chain fire it he had a quick turn around in 2 days but the cf auto root did not work .It looked like it was missing the recovery .I also sent mskip a post ,but i have not got a reply yet.

Thanks for pushing the cause vipsavior.
I'm sure the experts will get it sorted, or give us more to test - hopefully this weekend.

No go for me either. Using Odin 3.07 and CF-Auto-Root-sc02e-sc02e.zip.
(Odin says Pass, but SU doesn't show up in apps.)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-sc02e-sc02e.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

The best way to make a NAND back up is CWM you can get CWM by Flashing it in Odin.It will work trust me i did it plenty of times this week .Follow the directions it should take 5 sec to flash leave auto reboot checked .Use this file on there site International Galaxy Note 2 GT-N7100
CWM install directions

I am thinking of 1 more option flash the Rom with a custom one I know some stuff might not work like edy payment camera, gps and the 4G signal may be not as strong as the original. I am still looking on which rom to use. It's a risk but I will give it more thought.
I saw in the Japanese forms they are flashing using 7015 but some functions are lost. I hope CM mod comes to the note 2 soon.
Sent from my SC-02E using xda app-developers app

vipsavior, I noticed that your recovery is 8,388,608 bytes in size. The recovery from the original firmware (which Chainfire got from SamFirmware) is 6,273,280 bytes in size.
I hate to sound like a total noob, but could they be different? Are you sure that your recovery is stock from your device?
I'm hoping that it's just a question of getting the correct recovery.img to Chainfire.

Grant Barker said:
vipsavior, I noticed that your recovery is 8,388,608 bytes in size. The recovery from the original firmware (which Chainfire got from SamFirmware) is 6,273,280 bytes in size.
I hate to sound like a total noob, but could they be different? Are you sure that your recovery is stock from your device?
Click to expand...
Click to collapse
the recovery may be different because i used cwm.

I was also thinking if i do send my phone to get rooted can i extract the rom and upload it for others to download with SU installed

Having issues with i747, need assistance.

Just picked up a new-ish i747 from my brother because he grabbed the latest note. He did a factory reset on it and it kept getting stuck at the white ATT screen. I figured no big deal I'll just take it home and root/rom it.
Well following this guide...
http://forum.xda-developers.com/showthread.php?t=1739426
...I get the following error when trying to use odin.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Why is this thing not flashing, and why did a factory reset cause this thing to get stuck at the white ATT screen?
FWIW I plan to root/unlock this thing so I can use my tmobile straight talk sim in it. Just can't get it to cooperate for some reason.

Hi.
Make sure you're using an official Samsung cable.
Go back into recovery and be sure to format /cache and /data too.
Sent from my SGH-I747 using Tapatalk

RJantu said:
Hi.
Make sure you're using an official Samsung cable.
Go back into recovery and be sure to format /cache and /data too.
Sent from my SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I was using the OEM cable and that didn't help.
Eventually I was able to get the phone to boot normally. I then rebooted in to download mode and tried the CF auto root method here...
http://forum.xda-developers.com/showthread.php?t=1963790
...which appears to have worked.
Now since I want to use my straighttalk tmobile sim in this device I'm guessing I have to unlock it. How do I go about doing that on 4.3?

You will have to get an unlock code for your phone. With the 4.3 bootloader, you cannot downgrade to the stock 4.1.1 ROM that's required to use the free unlock method.

You can't do it the same way you would in 4.1.1 with the dialpad. If you can downgrade to that you can unlock it for free.
Sent from my SGH-I747 using Tapatalk

RJantu said:
You can't do it the same way you would in 4.1.1 with the dialpad. If you can downgrade to that you can unlock it for free.
Sent from my SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Is there an easy/safe way to downgrade? I'm going to be throwing a rom on here when I'm done anyway.

johnnyrichter said:
Is there an easy/safe way to downgrade? I'm going to be throwing a rom on here when I'm done anyway.
Click to expand...
Click to collapse
DO NOT attempt to downgrade to an earlier version of stock ROM with ODIN or you will brick. See if your brother can work with you to get the unlock code from AT&T. This will be the safest way to SIM unlock. Do not install any custom ROM until this is done
Sent from my awesome phone.

aybarrap1 said:
DO NOT attempt to downgrade to an earlier version of stock ROM with ODIN or you will brick. See if your brother can work with you to get the unlock code from AT&T. This will be the safest way to SIM unlock. Do not install any custom ROM until this is done
Sent from my awesome phone.
Click to expand...
Click to collapse
He is on his way over with a microSIM so I can cut my straighttalk tmobile sim down. I'll have him call ATT while he's here.
Will report back once done.

johnnyrichter said:
He is on his way over with a microSIM so I can cut my straighttalk tmobile sim down. I'll have him call ATT while he's here.
Will report back once done.
Click to expand...
Click to collapse
ATT is refusing to give him the unlock code. They're telling him to submit an online request which takes an unknown amount of time to complete IF it's approved. They said giving him the code over the phone is against some new policy.

johnnyrichter said:
ATT is refusing to give him the unlock code. They're telling him to submit an online request which takes an unknown amount of time to complete IF it's approved. They said giving him the code over the phone is against some new policy.
Click to expand...
Click to collapse
If the phone out of contract already, your brother can submit request for unlock, I did twice for (2)iphone and withing week or two get unlock.

4b3ck said:
If the phone out of contract already, your brother can submit request for unlock, I did twice for (2)iphone and withing week or two get unlock.
Click to expand...
Click to collapse
I'm trying to get this done tonight. I have work at 530am and already cut up my sim card which I now wish I wouldn't have done until I found out how retarded ATT is about unlock codes.

Went ahead and gave cellunlocker a try, fully convinced that I was about to lose 30 bucks, and it actually worked. Using rom manager to flash the latest CWM so I can flash AoCP kitkat.

johnnyrichter said:
I'm trying to get this done tonight. I have work at 530am and already cut up my sim card which I now wish I wouldn't have done until I found out how retarded ATT is about unlock codes.
Click to expand...
Click to collapse
The straight talk sim should work without an unlock code. Provided you have an AT&T compatible sim card that they recently started using again. My phone is an AT&T locked s3 using a Net10 sim. Put it in and then go to the APN Settings, insert your settings, reboot and enjoy. Tracfone, straight talk and Net10 are all 3 one in the same company, I assume since that's how it works on Net10 it will work that way for you.
Although I don't know for a fact that you shouldn't have to be unlocked someone else who does run straight talk could maybe post up.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth

It's the tmobile sim from straight talk so I needed the unlock which is done already.
Now I'm trying to get stuff to install. I installed rom manager but it won't flash CWM, it just sits on "flashing." I also can't get supersu or superuser to work. I think it has something to do with knox, and/or the method I used to root this thing last night.

Used this method(#2) to flash cwm/remove knox...
http://forum.xda-developers.com/showthread.php?t=2538991
...and it worked. Was able to then flash 4.4 aocp and the latest gapps. Everything seems to be working and I'm not getting those stupid security warnings anymore.

Error when trying to rollback from CM 12.1 to Stock on N910P

Hi!
First of all, thanks for reading this...
Yesterday I installed Cyanogen cm-12.1-20160208-NIGHTLY-trltespr on my SM-N910P but I noticed that I lost my 4G connectivity (I only receive H, I'm in Mexico, using Nextel network). Because of that, I'm trying to rollback to my stock firmware (5.1.1) but when trying to do it using Odin (I've tried several FW and Odin versions) every time I receive the following error log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU3BOF5_N910PSPT3BOF5_N910PVPU3BOF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone, I receive this error:
UDC START
SW REV CHECK FAIL: [aboot] Fused 4 > Binary 1
[1] eMMC write fail: ABOOT
Any suggestion? I'll really appreciate your help
Thanks for your time!
Regards.

The bootloader has increased security that prevents older bootloaders from being installed even if the reactivation lock is not enabled. You cannot go back that far in Odin.
You've most likely found that you can still go back to CM with a backup or flash ROM. You should backup the things you want to keep that are on internal memory because you need to wipe that to restore stock.
You'll need a newer stock tar to restore stock. Galaxy Tools by iDone or this application in Google Play will tell you what your bootloader is to restore the same stock tar or newer.https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo But you can most likely install the latest stock tar found in the general forum if you go into recovery and wipe everything but extSdCard, power down and use latest Odin with Odin defaults to install it.
You need to go into Settings/System update and update PRL and data profile once your restored to stock.
Sent from my SM-N920P using Tapatalk

samep said:
The bootloader has increased security ....
Click to expand...
Click to collapse
Bro, you're my hero!!!! :good: my n910p is now as original!!! but now, I really don't know how to update the PRL for my network in Mexico...
Searching on Google I found how to update for Sprint Phones (My phone is a sprint one, but unlocked, so I can use it here in Mexico...) but I don't know if that could do the job...
Thanks!!!

lordkorhat said:
Bro, you're my hero!!!! :good: my n910p is now as original!!! but now, I really don't know how to update the PRL for my network in Mexico...
Searching on Google I found how to update for Sprint Phones (My phone is a sprint one, but unlocked, so I can use it here in Mexico...) but I don't know if that could do the job...
Thanks!!!
Click to expand...
Click to collapse
Your carrier should be able to help with the network connection issues. Tech support maybe?
Sent from my SM-N920P using Tapatalk

samep said:
Your carrier should be able to help with the network connection issues. Tech support maybe?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Thanks my friend for your follow up!
I contacted Tech support today and after "several revisions" they told me that it is maybe the telephone, because when we tried to go to Settings > Data Usage > Mobile Networks, the option "Network Operatos" is disabled....
I was thinking to do the same that I did to run away from Cyanogen... Use the Phone info app, see the bootloader version and look for a firmware of that version (actually I have the N910PVPS4COK1) and apply it again to my phone... to see if that helps... what do you think?
Thanks!!!

lordkorhat said:
Thanks my friend for your follow up!
I contacted Tech support today and after "several revisions" they told me that it is maybe the telephone, because when we tried to go to Settings > Data Usage > Mobile Networks, the option "Network Operatos" is disabled....
I was thinking to do the same that I did to run away from Cyanogen... Use the Phone info app, see the bootloader version and look for a firmware of that version (actually I have the N910PVPS4COK1) and apply it again to my phone... to see if that helps... what do you think?
Thanks!!!
Click to expand...
Click to collapse
They can't provision it? I'm not sure if you have to be rooted to access it on an unlocked phone?
If they won't provision it, root or the XAS stock tar version of OK1 may open up the settings at more networks if you don't see them there. Be aware that going backwards in Odin may be blocked and cause those problems with flash again.
But you're rooted anyway, right? Try adding these lines to bottom of build.prop, leaving one blank line with no spaces at end and reboot.
ril.sales_code=XAS
ro.csc.sales_code=XAS
Sent from my SM-N920P using Tapatalk

samep said:
They can't provision it? I'm not sure if you have to be rooted to access it on an unlocked phone?
If they won't provision it, root or the XAS stock tar version of OK1 may open up the settings at more networks if you don't see them there. Be aware that going backwards in Odin may be blocked and cause those problems with flash again.
But you're rooted anyway, right? Try adding these lines to bottom of build.prop, leaving one blank line with no spaces at end and reboot.
ril.sales_code=XAS
ro.csc.sales_code=XAS
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
I've no root on in (already, LOL). Let me root it and then, apply the couple of lines that you told me...
I'll keep you posted.
Thanks buddy!

lordkorhat said:
I've no root on in (already, LOL). Let me root it and then, apply the couple of lines that you told me...
I'll keep you posted.
Thanks buddy!
Click to expand...
Click to collapse
It didn't work my friend... :crying: take a look to my captures...
Thanks!

What about the Access Point Names. Aren't there edit symbols on those?
I'm not the expert but I at least thought it possible to edit for carrier with MSL as well.
Maybe this helps?
https://www.whistleout.com/CellPhon...y-verizon-sprint-phone-on-a-different-network
Sent from my SM-N920P using Tapatalk

Yes, I can see and edit the APN options, in fact I add them manually to try to force the 4G connectivity, but I only reach 3G..
Let me resume that I did and how I mess all up ... I bought this Note 4 unlocked with Android 5.1.1 installed on it. When I received everything worked perfectly, even my 4G network. Then, I wanted to test Cyanogenmod, so I installed it into my device... (why I did that!!!???). I saw that I lost a lot of functions of my Note 4 and I wanted to rollback my device... As long as I noticed that I couldn't do that so easily, I posted in here looking for help... Then you helped me out saying me this: "You'll need a newer stock tar to restore stock. Galaxy Tools by iDone or this application in Google Play will tell you what your bootloader is to restore the same stock tar or newer.https://play.google.com/store/apps/d...uyen.phoneinfo But you can most likely install the latest stock tar found in the general forum if you go into recovery and wipe everything but extSdCard, power down and use latest Odin with Odin defaults to install it."
I did that and I found a ROM (from Sprint, ALL_SPT_N910PVPU4COG5_N910PSPT4COG5_CL5303209_QB5691107_REV00_user_low_ship_MULTI_CERT.tar.md5) that helped me to have my stock Android again, but since then, I lost 4G. Everything works perfectly but that. Then, I saw that on my phone appeared a system update, I ran it and now I gave the version N910PVPS4COK1
The last thing that I applied to my device was the root option, to try the option that you told me... that's my little soap opera... hehehe...
No matter the result of this, please thanks for your support on this path of darkness, XD

First thing first. That kernel your non. Is known to cause issues.
Sent from my 0x1 Note 4...... I love tep

N910p unlocked without 4G, only 3G
samep said:
What about the Access Point Names. Aren't there edit symbols on those?
I'm not the expert but I at least thought it possible to edit for carrier with MSL as well.
Maybe this helps?
https://www.whistleout.com/CellPhon...y-verizon-sprint-phone-on-a-different-network
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Hi!
After being investigating, I have recovered a "parcial backup" that I did of the boot files of my phone after I changed the ROM using TWRP.
The name of the backup file of the ROM that my phone had was is 2016-02-08--17-06-42_LMY47X.N910PVPU4COG5-LTE1-ASFAHAN.
The only files that I have from that backup are:
-boot.emmc.win
-boot.emmc.win.md5
-recovery.log
Just to remember, I'm from Mexico and I receive my note 4 n910p without Sprint logos and working perfectly on 4G LTE on Nextel. After I installed CM 12 I lost 4G. Actually I have Botcatrom and all works perfect except for 4g LTE. (I only receive 3g).
I have read that if a sprint phone gets unlocked, I'll be able to use only 3g, but as I mentioned before, I receive the phone working on 4G! so there must be something for it!
As we can see in the name of the ROM, it says LTE, so that's the one! (I think) but looking for that ROM on google, I cannot find it
Do you know something about that ROM? or maybe I can do something with the Boot files that I found? I was thinking to upload that Boot files into my actual Bobcatrom, but I'm not sure if it will help or I'll brick my device.
Any help will be appreciated.
Thanks!!!

lordkorhat said:
Hi!
After being investigating, I have recovered a "parcial backup" that I did of the boot files of my phone after I changed the ROM using TWRP.
The name of the backup file of the ROM that my phone had was is 2016-02-08--17-06-42_LMY47X.N910PVPU4COG5-LTE1-ASFAHAN.
The only files that I have from that backup are:
-boot.emmc.win
-boot.emmc.win.md5
-recovery.log
Just to remember, I'm from Mexico and I receive my note 4 n910p without Sprint logos and working perfectly on 4G LTE on Nextel. After I installed CM 12 I lost 4G. Actually I have Botcatrom and all works perfect except for 4g LTE. (I only receive 3g).
I have read that if a sprint phone gets unlocked, I'll be able to use only 3g, but as I mentioned before, I receive the phone working on 4G! so there must be something for it!
As we can see in the name of the ROM, it says LTE, so that's the one! (I think) but looking for that ROM on google, I cannot find it
Do you know something about that ROM? or maybe I can do something with the Boot files that I found? I was thinking to upload that Boot files into my actual Bobcatrom, but I'm not sure if it will help or I'll brick my device.
Any help will be appreciated.
Thanks!!!
Click to expand...
Click to collapse
Only thing I can think of is get in touch with your cellular provider or the point of sale of your phone. It seems you cannot run custom ROMs on your device and you don't have a full backup to restore. Ask if the XAS stock tar with APN edits is all you need. They should be able to help with provisioning service.
Updates would most likely come from OTA only once you restore the ROM with 4G would be my guess.
You should still be able to root and modify but that would have you in need of an updated stock tar to flash as your provider updates the ROM. IDK if it works but you may get by the tar updates using OTA update if you don't modify system.
Or make a stock backup of system partition before modifying it. Then you would restore that backup and full un-root. You would have to use the latest the updated Chainfire Auto root for Note 4. And you may have to root again and immediately go with full un-root in order to get the stock recovery with dm-verity cleared for OTA update. IMO, you'd be better off with a download for stock tar site before rooting but have the backup next time just in case. It might work for OTA updates but no guarantees.
I don't claim to be the expert but that's the best advice I can give with what I know ATM. Check around and see if there's a support site that includes your phone and provider; but you might find some guides our tutorials for editing APN. And when you get your ROM restored, try to copy your APN data to manually re-enter if you choose to risk another custom ROM or just need to provision it for service. Again, I'd suggest having a backup stock tar to flash before pursuing any risks.
Sent from my SM-N920P using Tapatalk

Can't flash new Verizon variant S20 5G UW model with stock firmware.

For some reason none of the stock firmware files I am trying are working to flash my phone to the unlocked stock version. I have tried the latest Odin, have the drivers installed, and have tried the patched versions of Odin as well. Each time I get the obvious SHA256 error on stock, but when I try the patched versions I get a "re-partition operation failed" error and it just fails after the "set PIT file" command. Am I wrong to assume this is just another S20 model? I am making sure to use the SM-G981u1 firmware that I have tried from two different sites. The third one I can try, being from sammobile won't be done for another 6 hours because I don't want to pay $7.50 a month for a file that I have to download once.
Is there something I am doing wrong? I am using a USB 3.0 port directly on the back of my motherboard, the original cable with an adapter that came with a WD hard drive, and all the latest drivers are installed. If anyone has any tips or was successful in flashing please let me know what you did and how you got it working.
The error I get through USB 2.0 with the adapter is
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 8662 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Try using a normal 2.0 USB port. This could be the reason. Saw this issue before.

From0toHero said:
Try using a normal 2.0 USB port. This could be the reason. Saw this issue before.
Click to expand...
Click to collapse
Tried and no luck. I think the only thing to try is the firmware file from sammobile and see if that gives me any issues. I am also going to try and see if updating the phone helps at all before flashing, so that's going now. If it does work I will update the original post.

cadcamaro said:
Tried and no luck. I think the only thing to try is the firmware file from sammobile and see if that gives me any issues. I am also going to try and see if updating the phone helps at all before flashing, so that's going now. If it does work I will update the original post.
Click to expand...
Click to collapse
are u putting the pit file in pit tab? also try using patched odin.. if still fails try extracting firmware then putfing back into tar without the pit file.. u get the idea..
does it give any error on phone when u get that error in odin?

I'll give that a try tonight. I've been meaning to do a factory reset since my Bluetooth is iffy.

elliwigy said:
are u putting the pit file in pit tab? also try using patched odin.. if still fails try extracting firmware then putfing back into tar without the pit file.. u get the idea..
does it give any error on phone when u get that error in odin?
Click to expand...
Click to collapse
Stupid question, but are all csc files password protected? I have three that I tried all need a password to extract the contents.
Tried with the newest version, extracted the .pit file with 7zip and
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 8662 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!
Same with G981U1UES1ATE4 version, error on the phone shows "SECURE CHECK FAIL : PIT"

Why are you trying to repartition and use a pit file?
Leave odin settings as default and load the 4 parts of the firmware into their relevant odin sections and hit start

*Detection* said:
Why are you trying to repartition and use a pit file?
Leave odin settings as default and load the 4 parts of the firmware into their relevant odin sections and hit start
Click to expand...
Click to collapse
Because that doesn't work. It flat out seems that the verizon model of the S20 is different.

cadcamaro said:
Because that doesn't work. It flat out seems that the verizon model of the S20 is different.
Click to expand...
Click to collapse
secure check fail means ur using the wrong firmware or the firmware was somehow modified..
whats your exact model and exactly what firmware are you trying to flash and where did you get it?
and no, stock firmware is not password protected.. only time ive seen password protected files is if u dl from some website that zips it and puts a password on it

elliwigy said:
secure check fail means ur using the wrong firmware or the firmware was somehow modified..
whats your exact model and exactly what firmware are you trying to flash and where did you get it?
and no, stock firmware is not password protected.. only time ive seen password protected files is if u dl from some website that zips it and puts a password on it
Click to expand...
Click to collapse
You're right, it's an SM-G981V which I thought was just a crappy way for verizon to rename their model considering they sell flashable s20+/ultra variants. It's just a totally new model though so it's not working. Also as far as the password protection, it was only on winrar and the files extracted fine in 7zip.
The fw files I've tried came from sammobile, and the download tool directly from the xda app. Multiple versions and no success.

cadcamaro said:
You're right, it's an SM-G981V which I thought was just a crappy way for verizon to rename their model considering they sell flashable s20+/ultra variants. It's just a totally new model though so it's not working. Also as far as the password protection, it was only on winrar and the files extracted fine in 7zip.
The fw files I've tried came from sammobile, and the download tool directly from the xda app. Multiple versions and no success.
Click to expand...
Click to collapse
considering u have a g981V then u are flashing wrong firmware.. u need to flash G981V firmware

elliwigy said:
considering u have a g981V then u are flashing wrong firmware.. u need to flash G981V firmware
Click to expand...
Click to collapse
The problem is I don't want the 981v firmware which is why I was trying to flash it to the carrier unlocked firmware. Either way I'm stuck with it so there's the answer for everyone else.

cadcamaro said:
The problem is I don't want the 981v firmware which is why I was trying to flash it to the carrier unlocked firmware. Either way I'm stuck with it so there's the answer for everyone else.
Click to expand...
Click to collapse
Everyone else already knew you have to flash the correct firmware for your device model....

Use frija (you can download it here on xda), punch in model SM-G981V / VZW and it should pull the firmware direct from Samsung.
If you don't want the vzw firmware, punch in XAA for the CSC. You'll need to flash it with patched Odin for it to work.

Da_G said:
Use frija (you can download it here on xda), punch in model SM-G981V / VZW and it should pull the firmware direct from Samsung.
If you don't want the vzw firmware, punch in XAA for the CSC. You'll need to flash it with patched Odin for it to work.
Click to expand...
Click to collapse
he wanted the U1 firmware lol.. the carrier specific models dont have multi csc.. he probably only has vzw csc and maybe gcf csc
he also can only flash g981v firmware since its a carrier specific model signed with different keys than U U1 W models hence his secure check fail error

Yeah, the VZW variant has physical hardware differences also, so getting a U1 firmware to flash would probably go badly as far as booting.
Looks like there are only two regions available, on SM-G981V, VZW and CCT (Comcast)
elliwigy said:
he wanted the U1 firmware lol.. the carrier specific models dont have multi csc.. he probably only has vzw csc and maybe gcf csc
he also can only flash g981v firmware since its a carrier specific model signed with different keys than U U1 W models hence his secure check fail error
Click to expand...
Click to collapse

*Detection* said:
Everyone else already knew you have to flash the correct firmware for your device model....
Click to expand...
Click to collapse
That's weird, because I routinely Flash U1 on to U, U onto XU, CZ onto literally anything I can so I can get past FRP locks... On older phones I used to flash carrier specific combination files onto the wrong devices so I had OEM unlocking in the developer options of AT&T devices. Maybe you just didn't know that it was actually a hardware limitation rather than a software limitation. I didn't. I that's why I'm here. And I know for a fact that it's possible to flash the wrong model/variant firmware onto a device, even if you don't. But hey that's XDA for you. Ask a question that requires a modicum of thought, and get a snarky answer from a "senior member" that doesn't know what they're talking about.
Anyway, to the OP, I'm also trying to flash the Xfinity splash screen off some unlocked G981V devices. It may be a lost cause because it's a hardware compatibility issue but I know a few people that might want to take a crack at it with me and I'll let you know how it goes. It was a good question. It just sucks that you always seem to get one headass in the replies.

Hi Cadcamero
In also trying to restore my S20 back to original flash.
I bought it rooted, but certain apps that I need do not work on rooted phones.
Could you by any chance share a link to the stop by step process that you follow. I've never done this before and a little overwhelmed....
I've downloaded odin ah the firmware off sammobile. Just need to now know what to do with them :silly:
Thanks a million
Lee

cadcamaro said:
The problem is I don't want the 981v firmware which is why I was trying to flash it to the carrier unlocked firmware. Either way I'm stuck with it so there's the answer for everyone else.
Click to expand...
Click to collapse
Did you ever find a solution? I am having the EXACT same problem on a Verizon S20 FE. I want to load the unlocked American XAA firmware onto it. I am getting the same error. I wonder what Verizon has come up with to stop this? I have ALWAYS done this with my Verizon phones until now.