[Q] Iphone 6 quality case for the Z3 Compact? - Xperia Z3 Compact Accessories

Hey all,
Recently received my Z3 compact and am loving it. The only slight niggle I have is with the case manufacturers, are there any cases similar to that of the official iPhone 6 (many apologies, I am unable to post a link just yet)
I liked the look of some slim cases, for example the terrapin hybrid, however the cut outs on the top left side of these cases leave the phone very exposed (i would much rather it be fully covered, apart from the magnetic charging port) and not structurally sound. I own the case-mate tough and the top left side is weak.
So I am curious if there are any cases out there that offer the quality and look of the iPhone 6 case mentioned above, not to mention the feel too. Whilst I am really happy with the Z3 compact, the 6's design sits in the hand well.
Many thanks guys!

http://www.amazon.de/gp/product/B00MNBGJM2?psc=1&redirect=true&ref_=oh_aui_search_detailpage
That's the one I use... the name really fits... it feels like "barely there". Additionally it allows the charging at the official docking station without problems. And it in general just feels good I have to say.

tomcatoggo said:
http://www.amazon.de/gp/product/B00MNBGJM2?psc=1&redirect=true&ref_=oh_aui_search_detailpage
That's the one I use... the name really fits... it feels like "barely there". Additionally it allows the charging at the official docking station without problems. And it in general just feels good I have to say.
Click to expand...
Click to collapse
ah thanks for the reply! my only issue with case mate is the exposed side. i have the other one, and it makes the top corner unstructured/weak.. other than that it'd be perfect

Gabriel_G said:
ah thanks for the reply! my only issue with case mate is the exposed side. i have the other one, and it makes the top corner unstructured/weak.. other than that it'd be perfect
Click to expand...
Click to collapse
hm... don't know... to me it really feels stable even though that one corner is kinda exposed... but nevertheless it doesn't bend or get off at all. At least I was quite impressed with it

tomcatoggo said:
hm... don't know... to me it really feels stable even though that one corner is kinda exposed... but nevertheless it doesn't bend or get off at all. At least I was quite impressed with it
Click to expand...
Click to collapse
ah sounds like the barely there case is better than the tough one. still, i am a bit hesitant to purchase from them again after feeling let down by the quality of their other case...

Gabriel_G said:
ah sounds like the barely there case is better than the tough one. still, i am a bit hesitant to purchase from them again after feeling let down by the quality of their other case...
Click to expand...
Click to collapse
Understandable. But I also have to say, that people do feel differently about stability / product quality etc.
E.g. some people complain, that when you press against 1 corner of this case, you hear some "creaking" noises... and I can confirm that in general. But the point to me is, that in my usage (and I think I can honestly call me a power user) I just don't get to create that sound... so this doesn't matter to me. For me the pros are:
- stable (dropped already a few times.. absolutely no visible damage neither to phone nor case)
- super slim (charging in dock still perfectly possible)
- simple black color (I don't like fancy stuff)
- perfect material... never slipped in my hands even the tinyest bit

i'm using this one
http://www.ebay.com.au/itm/14145974...49&var=440608711090&ssPageName=STRK:MEBIDX:IT

Related

Awesome folio case for under $25

Hey guys,
I've been prowling around these sectors ever since I got my Xoom, searching for the perfect case.
What I wanted:
The flexibility of the Zoogue case really appealed to me - I like the idea of being able to choose the angle of viewing. I also wanted any case to be able to be able to provide a setting for only a slight tilt when I wanted to type.
BUT the high price tag really put me off.
Also, I wanted it to be pretty thin. The Xoom is big enough without me adding to its bulk.
After much searching, I think I found the perfect one, so I thought I'd share my experiences (Here's the link where I bought it from: http://www.ebay.com.au/itm/Black-Fo...Accessories&hash=item3f0a05cb28#ht_3816wt_947)
Firstly, the price tag attached to this thing is ridiculously awesome. At first, I bought it thinking 'why not? it's less than $25!', but the product turned out to be even more awesome.
Firstly, it's really thin, but covers the tablet nicely. Secondly, to a certain extent, you can also choose what viewing angle you want, which is awesome. I say to a certain extent, because after a while, you run out of cover to stick the velcro on (have a look at the attached picture)
All the cutouts are there, but you can't charge with the case closed. I don't think this is a problem, because the cover folds back on itself nicely, so you can keep it open to charge. Which brings me to the next plus: it's designed so that it folds back on itself and it's actually pretty comfortable to hold in portrait mode (I've heard that this isn't the case with the official Moto one).
The only minor flaw I've found is that on mine, the top left corner is slightly higher than the top right - what this means is that the front-facing camera is covered ever so slightly by the strip of leather running under it. The picture I attached kind of exaggerates it a bit; it's not that bad. When I booted up the front-facing camera, there's just a line across the very bottom of the image. I'm not sure if this is on all their cases, so it might just be mine.
One more note: When I first heard about cases using velcro, I immediately wondered if the velcro would wear out over time, like in some of my bags. If you're also wondering that, then don't worry! This doesn't use the traditional velcro. You know how traditionally, the fuzzy part has all the loops and the the other part would like... 'hook' onto it and that's how it stuck? Well, this uses a different sort... one that looks like it won't wear out easily. Also, this case is pretty damn sturdy when you've got it propped up. I've tested this out extensively, and even when poking at the screen with a fair bit of force, it never topples.
Finally, before anyone asks: no, I'm not in any way affiliated with the seller, I'm just one super-happy customer. Even though it says it's free shipping, they still provided tracking for me. They even took a picture of the package before they sent it off and sent that to me, which was an eBay first. Plus, the person dealing with the emails just seems really nice, based on the correspondences I've had.
So pretty much, this case is amazing (for me, anyway). I don't think it's real leather, but for under $25, I wasn't expecting it. Plus, real leather is a ***** to take care of, anyway. Whether you need this case will probably come down to what you want out of a case, but this one has been pretty versatile for me (I've had it for about a month now).
EDIT: I didn't realise how much I wrote.... can you tell I'm procrastinating?
EDIT2: I forgot to add that there's even a magnet that holds the cover closed. It's not too strong but not too weak, either. Quite nifty, actually!
screen
is the screen filtered
wyllem said:
is the screen filtered
Click to expand...
Click to collapse
Nope, there's nothing on the screen area at all. That's my matte screen protector that I bought off eBay. It was the cheapest one I could find and it actually works quite well!
i got this one. will post pics and give feedback as soon as i got it.
Well, I really like it myself, so it'll be interesting to hear feedback from other people too.
And daaaang it, it's on sale now (I hate when things go on sale after I buy it!) Oh well, it was already cheap to begin with

A realy perfect Leather Case

from ebay
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=270831391457&ssPageNam e=ADME:L:OC:AU:1123
review:
After my first disapointing buy from ebay i bought this "sexy"
synthetic leather case.
Its weight is 290 grams.
Is a very-very slim case and when it closed, the case is tightly fixed on the tablet.
It has 3 deep grooves for standing and the tablet is very stable in these positions.
The philosophy of this case is "to not hiding nothing from the tablet when you use it."
On the back side there is a gentle opening for the camera.
It smells like leather.
The close clip aplly a good force to keep the case closed.
Every button or socket of the tablet is accesible with closed case
And finally i am happy, and this is the most important
Looks good, does it have a typing angle? What is the name?
also are you able to charge the tab without having the case open? i have one such and i need to have my case open each time i charge which is a pain
This is maybe the case I'm looking for. Can you please share the name and the link for the case. Since you can't post links, replace for examples the dots of the url with spaces or some other characters.
Maybe this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320786081962#ht_2592wt_1165
You have to open the case when charging (if I remember right).
I bought this. Premium quality indeed.
EDIT:
cheaper one
link
//link fixed
The Style is the same like "PyroSkins and Vipertech" but what about the leather quality?
How much did you pay?
Edit:
PyroSkin Thread
http://forum.xda-developers.com/showpost.php?p=16376571&postcount=1
Mondfahrer said:
The Style is the same like "PyroSkins and Vipertech" but what about the leather quality?
How much did you pay?
Click to expand...
Click to collapse
I consider it high quality. Please check my links.
bobsbbq said:
Looks good, does it have a typing angle? What is the name?
Click to expand...
Click to collapse
yea of course it has 3 angles.
unfortunately is no-name but is TOP quality
bharathbala2003 said:
also are you able to charge the tab without having the case open? i have one such and i need to have my case open each time i charge which is a pain
Click to expand...
Click to collapse
yes, you can charge it with the case closed
spritable said:
This is maybe the case I'm looking for. Can you please share the name and the link for the case. Since you can't post links, replace for examples the dots of the url with spaces or some other characters.
Click to expand...
Click to collapse
www#ebay#com#au/itm/ws/eBayISAPI.dll?ViewItem&item=270831391457&ssPageName=ADME:L:OC:AU:1123
Mondfahrer said:
The Style is the same like "PyroSkins and Vipertech" but what about the leather quality?
How much did you pay?
Edit:
PyroSkin Thread
http://forum.xda-developers.com/showpost.php?p=16376571&postcount=1
Click to expand...
Click to collapse
Yes, its really looks like PyroSkins clipcase
the feeling and the smell is "perfect leather"
23 us dollars without shiping cost
http://www.ebay.com.au/itm/ws/eBayISAPI.dll?ViewItem&item=270831391457&ssPageNam e=ADME:L:OC:AU:1123 - just a link that's easier to click then yours
I must say the case looks really nice!
I was wondering about the 3 viewing angles though - do they firmly support the Tab? Would hate to buy it and then find out it slips and falls out when I set it up on one of the angles (I saw that happen before...). Also, is it possible to use this case to prop your Tab up when you put it in your lap (in bed or something similar)? Or is it too flimsy?
And do you feel the extra weight when you carry the tab around? I really love how light it is right now, you don't even notice you have it in your bag (with the standard samsung pouch on) and it's really easy to hold it in one hand and typing with the other if you're walking around the house.
nightmarebadger said:
I was wondering about the 3 viewing angles though - do they firmly support the Tab? Also, is it possible to use this case to prop your Tab up when you put it in your lap (in bed or something similar)? Or is it too flimsy?
Click to expand...
Click to collapse
The gaps for the 3 viewing angles are deep enough, and yes you can use it in your lap, my wife do it often.
nightmarebadger said:
And do you feel the extra weight when you carry the tab around? I really love how light it is right now, you don't even notice you have it in your bag (with the standard samsung pouch on) and it's really easy to hold it in one hand and typing with the other if you're walking around the house.
Click to expand...
Click to collapse
is still light it is just 290 grams more.
but if you want to use it with one hand, i think that the best way is
to hold it in portrait like a book because the total weight is about 850 grams
Well you got me sir, just ordered one myself. Hope it works as well as you described
Will report back once I have it and test it out a bit ^^
Can anyone confirm if this will fit tmobile galaxy tab 10.1?
Sent from my SGH-T859 using XDA App
Isn't it the same size? If it is, it should fit... can't help you out there though as I have a 7500 one.
The same case, with a new name, posted once again in a new thread. This was $12 on amazon last week.
Really? I sure couldn't find it when I looked (didn't look really hard though)
Doesn't really matter though, if it's a good case I'm more then willing to spend $23 on it. The most basic samsung pouch costs 25€ (about $35) here :S.
nightmarebadger said:
Really? I sure couldn't find it when I looked (didn't look really hard though)
Doesn't really matter though, if it's a good case I'm more then willing to spend $23 on it. The most basic samsung pouch costs 25€ (about $35) here :S.
Click to expand...
Click to collapse
You definitely didn't look very hard. Here's my post from last week. Link to amazon where you can get if now for $19.
http://forum.xda-developers.com/showpost.php?p=19150993&postcount=203
Aye, you're right. Wouldn't help me though, since amazon tells me that "there is a slight problem with my order" (they can't ship it to my place for some reason).
Still, good to know a cheaper option might exist for some people, thanks!
nightmarebadger said:
Isn't it the same size? If it is, it should fit... can't help you out there though as I have a 7500 one.
Click to expand...
Click to collapse
Yes the size should be the same. I'm just worried about button/port placement.
Sent from my SGH-T859 using XDA App
For people trying to find one from the UK...
I purchased a look a like case from here:
http://www.amazon.co.uk/gp/product/B005ECHQ4C
I was struggling to find it as cheap as in the US for example.
The one from the above link, seem to be very good so far. All viewing angles work great, both on a flat surface and on my lap. The typing position is my most used.
'Leather' quality seems good so far. Of course it is going to add some weight, but not really an issue for me. ALL ports/buttons are fully accessible, inc charging when case is closed.
its a great case

Cases and trapped sound

Hello,
I have now a TPU case that is OK, but has a serious problem. When on a table and a notification rings, for a reasonable volume, I can hear it. It looks like the sound is trapped by the case and the table.
Do you know of any case which have any kind of knob that let the sound going out? I know there are cases for other phones that has one knob in each corner, so the phone stand in the surface like a table with very short legs.
Fer
Could you attach a picture or a link to the case?To be honest, lg kinda made a mistake with the position of the speaker.Why?because of the flat back,when you put the phone on a flath surface,it's blocking the speaker,so you won't be able to hear it loud and clear. Same happens with the case.I also have a silicon case and facing kinda the same issues
kimitza said:
Could you attach a picture or a link to the case?To be honest, lg kinda made a mistake with the position of the speaker.Why?because of the flat back,when you put the phone on a flath surface,it's blocking the speaker,so you won't be able to hear it loud and clear. Same happens with the case.I also have a silicon case and facing kinda the same issues
Click to expand...
Click to collapse
This is my current cheap case: http://img.tvc-mall.com/uploads/details/EPC-E973-01-1.jpg
This is Otterbox case for LGOG with I suspect has a knob in the speaker: http://cdn-store.crackberry.com/store_images/product_images/accessories/large/13117.jpg
And here is the nexus 4 ringke fusion case with has one little knob in each corner: http://farm9.staticflickr.com/8511/8525173164_4d64efe089_z.jpg
I have read in a spanish forum that there are people who has put a sticky in order to stand up a little the phone, so the sound can go out with clarity, but that sound to me like a dirty solution.
I continue looking for the perfect case
Same silicon as mine.Yep,no doubt,it's more like a design error.i always place my phone upside down or i'm looking for an uneven surface
kimitza said:
Same silicon as mine.Yep,no doubt,it's more like a design error.i always place my phone upside down or i'm looking for an uneven surface
Click to expand...
Click to collapse
Well, I think is a flaw in design, but most phone makers are putting the speaker in the back. I only know of some HTC models which has in the front, and I think iPhone has in on the sides. It is more common that it appears.
I have put a bit of imagination and make a little workaround. I will see about it. Hope it will last. See the pictures:
http://imageshack.us/photo/my-images/833/slbi.jpg/
http://imageshack.us/photo/my-images/59/6rr5.jpg/
clonfsp said:
I have put a bit of imagination and make a little workaround. I will see about it. Hope it will last. See the pictures:
http://imageshack.us/photo/my-images/833/slbi.jpg/
http://imageshack.us/photo/my-images/59/6rr5.jpg/
Click to expand...
Click to collapse
hah, this is one funny "ghetto" workaround, but as long as it works for you and you're not worried about the looks its fine

[CASE REVIEW] Ringke - Fusion (Smoke Black) for Sony Xperia Z3c

Hi fellow XDA roamers,
As promised, I'll be doing a quick review of the Ringke - Fusion (Smoke Black) for Sony Xperia Z3 Compact smartphone.
Here's the Amazon page : Fusion (Smoke Black)
And here's the official website (thanks to @sh4d0wf0x) : Rearth - Ringke Fusion
For some reason, I can't find any official website, not that I need one but sometimes it can help to make sure the product isn't coming from some cheap company.
After my desastrous experience with the CaseMate - Tough Case I was quite impatient to get this case, I even ordered it the morning I got the CaseMate.
I got it for a whopping 13 euros (there was a nice sale on it) instead of 30 and I received it in less than 4 days, another end of the year miracle !
Unboxing
When you receive this case, you know that your cash didn't went to the packaging, a simple translucent plastic bag with a pre-cut opening
The little bag contains the most basic accessories :
The case
A screen protector
A case template for cutting your own back image for the case
Yup, that's it... But who needs extras nowadays ?
At least everything is looking sharp and durable, this time the case fits perfectly the smartphone and doesn't leave any gaps.
It feels secure and looks nice altogether, I must say that this case is quite simple but does its job perfectly.
I haven't dropped my phone since then but I do think it will come unscathed.
A nice addition are little bumps on the back side of the case at each corners, so when the phone is placed on the back, the whole case isn't touching the surface and they're about 1 mm tall so they won't interfere with your hand.
As for the users who are wondering about the little USB hatch, it's still very easy to open (I don't have long nails) it and plug the power cord.
The only things that are going the wrong way are the back of the case that "stick" to the phone, sometimes you can see small succion marks but they can be removed with a simple pressure on the side of the case, and the other thing is that it attracts a lot of fingerprints... like a lot of cases...
The screen protections is like any other, nothing particulars about it, it's cut out for the speakers and led and it's mostly an expected thing from a phone case package.
Let's do a roundup !
The pros
Simple but still looks tough
Bumper protection has a nice rubber feel
Covers all the buttons and offer a little rubber cover for the headphone jack
Small bumps on the back
The cons
Small succion marks from the back of the case, the back of the case tends to suck to the back of the phone
Attracts fingerprints, grease marks & dust
Verdict
All in all, this case is living up to my expectations, looks simple but you can feel that the phone is protected and every little additions are welcome and useful.
This case clearly wipe away the bad taste that CaseMate left in my mouth, can't wait to receive the Orzly tempered glass to check if it all works together
Another review for you guys
Q&A
Anyone with the same case feeling the same as I do or I am missing something ?
is this the best case to get for the z3?
good review bro... can you take some pics of the case?
i think this is the official page www.rearthusa.com
thanks!
shanghei said:
is this the best case to get for the z3?
Click to expand...
Click to collapse
I don't know if it's the best case, for now I've only tried 2 of the available ones. There are a lot of other cases out there and it's quite possible that there's a better one.
I haven't found it yet
sh4d0wf0x said:
good review bro... can you take some pics of the case?
i think this is the official page www.rearthusa.com
thanks!
Click to expand...
Click to collapse
Thanks a lot
It looks like it's the official website, I'll update my review to add it. Thanks for that too
As for the pictures, I'll try to get some with a colleague's phone, won't be perfect but should be plenty enough for such a quick review.
The casemate tough has a much larger cutout on the magnetic charger side.
Do you think this case will be compatible with the OEM docks? (http://www.sony.com.au/product/dk-48)
sturmeh said:
The casemate tough has a much larger cutout on the magnetic charger side.
Do you think this case will be compatible with the OEM docks? (http://www.sony.com.au/product/dk-48)
Click to expand...
Click to collapse
I think it should be compatible but as I don't own one myself, I can't give you a clear confirmation
Maybe one of the other XDA users does have this combo and can confirm it works well ?
Quick poke around on the internet suggests it probably won't. Shttp://www.reddit.com/r/SonyXperia/comments/2n3seu/z3c_ringke_fusion_case_and_dk48_dock/)
I'm considering getting a z3c, but the community looks very sparse, and there's no actual usable roms. Is it even worth buying? :\
sturmeh said:
Quick poke around on the internet suggests it probably won't. Shttp://www.reddit.com/r/SonyXperia/comments/2n3seu/z3c_ringke_fusion_case_and_dk48_dock/)
I'm considering getting a z3c, but the community looks very sparse, and there's no actual usable roms. Is it even worth buying? :\
Click to expand...
Click to collapse
Too bad for the dock
As for buying it, I can't give your an objective feedback since it's my first Android phone ever but from my experience and the research I've done before jumping in, it's one of the best phone for this kind of size.
This little monster is compact, fast like it's bigger brother and even better looking than him. As for the Sony bloatwares, there are like 10 apps pre-installed, I'm not using most of them but they're not threatening my experience so it's ok for me.
For the custom ROM scarceness, it's linked with the DRM removal associated with unlocking the bootloader. As developers unlock more and more functionalities, more ROM will become available. If you want more informations about that, feel free to look around the General section of the forums.
I'm not very fond of custom ROM (I'm new to this) so for now I'll stick with the stock one.
Buying this phone is more of a love @ first sight and personal tastes, so it's mainly up to you to decide whether you will throw your cash at the screen or not.
Thanks for the insight.
Yeah it'd be my 6th Android phone, with my first being the very first Android phone (HTC Dream).
I've pretty much always used a custom rom with the exception of using rooted stock on the Nexus 5.
The hardware is what appealed to me as well, but it doesn't seem like the software is going to cut it just yet. S:
Just made friendship with my phone and before I bought it i ordered this case. Hope it will arrive soon so I can hopefully agree with your review.
Sent from my D5803 using XDA Free mobile app
I have one of these myself and happy with it.
sturmeh said:
The casemate tough has a much larger cutout on the magnetic charger side.
Do you think this case will be compatible with the OEM docks? (http://www.sony.com.au/product/dk-48)
Click to expand...
Click to collapse
I have a similar dock and without the insert mine charges fine with this case. I put a thin strip of velcro(the soft side) on the back edge where the phone rest instead of the insert.
I assume you're all using stock 4.4 then?
Ethenyl said:
Q&A
Anyone with the same case feeling the same as I do or I am missing something ?
Click to expand...
Click to collapse
Are you using the case with a magnetic charging cable? If so, how does the one(s) you use look?
spacemanr said:
Just made friendship with my phone and before I bought it i ordered this case. Hope it will arrive soon so I can hopefully agree with your review...
Click to expand...
Click to collapse
I just hope the same thing for you
sturmeh said:
I assume you're all using stock 4.4 then?
Click to expand...
Click to collapse
Yup, I'll wait for the warranty to void off before rooting anything.
madsb said:
Are you using the case with a magnetic charging cable? If so, how does the one(s) you use look?
Click to expand...
Click to collapse
Sorry I'm still using the USB cable to charge it but I've already made my mind to buy the Magnector X2 magnetic charger when I have the money, maybe later this year.
I bought both the Ringke and the Cruizerlite. I wanted to like the Ringke, but the left side along the charging port and the sd card port is just way to loose. I can't help but think it would even get looser over time and use. My phone wears the Cruizerlite and I'm very happy with it. The only thing I would change about the Cruizerlite is to make a version with a plain back on it.
hamdawg66 said:
I bought both the Ringke and the Cruizerlite. I wanted to like the Ringke, but the left side along the charging port and the sd card port is just way to loose. I can't help but think it would even get looser over time and use. My phone wears the Cruizerlite and I'm very happy with it. The only thing I would change about the Cruizerlite is to make a version with a plain back on it.
Click to expand...
Click to collapse
Thanks for the insight, it's true that the left side is loose, but I'm not really complaining since I only manipulate this side when I need to plug the USB cable.
For now the Ringke is more than enough for me, the Cruzerlite seems a little bit flimsy for me and the way it blocks the USB section is bothering me. Maybe when I'll have a magnetic charger I will try this one.
I probably should have mentioned that I use the magnetic desk charger and I pair my phone with my PC over WiFi for any transfers, therefore I have no need to access the usb port.
sturmeh said:
Quick poke around on the internet suggests it probably won't. Shttp://www.reddit.com/r/SonyXperia/comments/2n3seu/z3c_ringke_fusion_case_and_dk48_dock/)
I'm considering getting a z3c, but the community looks very sparse, and there's no actual usable roms. Is it even worth buying? :\
Click to expand...
Click to collapse
Its the best phone I have owned and the ONLY android phone that I haven't rooted. There is no need.
Sony Skin is VERY minimal and I like the Sony Apps including the Walkman and Album. Nova launcher and a Lollipop Theme (Via Sony's own theming engine) has produced a phone I have ZERO complaints with.
Also the battery really is epic, I use stamina mode and have full sync of gmail, exchange, messenger, whatsapp, the lot and easily leave work with 70-75%
My only complaint like others have is the camera, normal lights its fantastic but low light over cameras beat it.
Trust me this is a great phone. And Lollipop is coming next month.
Seriously just buy one.
aviduser said:
Its the best phone I have owned and the ONLY android phone that I haven't rooted. There is no need.
Sony Skin is VERY minimal and I like the Sony Apps including the Walkman and Album. Nova launcher and a Lollipop Theme (Via Sony's own theming engine) has produced a phone I have ZERO complaints with...
Click to expand...
Click to collapse
I have nothing more to add...
Well, I can't be objective on this one but hell, I've already tried 3 or 4 devices under Android and not a single one came closer to it than the Samsung flagships but with added bulkiness.
Just click on that damn "Throw my cash at the screen" button

Camera Bump Protection FIX

Hey!
Not a fan of cases, skins, or the like?
I have stumbled upon the best thing that fits inside the lump that protrudes from our lovely Nexus 5X's.
Paper Reinforcement Labels.
Those things we used once a long time in middle school now have a awesome purpose!
They fit inside the white lip perfectly and circle the camera module with grace.
When you stack three or more it creates a nice resting place for your phone.
Enjoy this little tip!
Let me know if you works for you!
Picture Attached!
-Romanpower
Somewhere out there, an industrial designer is weeping... (No disrespect, if you're this concerned about protecting that area than there must be others that feel the same way.)
One would hope that it was designed to be durable from its inception, since it's quite clear that this area will likely receive many impacts over the course of the device's life, whenever the phone is put down without caution.
I hope Spigen produce one.
redneck engineering.
ohussain said:
Somewhere out there, an industrial designer is weeping... (No disrespect, if you're this concerned about protecting that area than there must be others that feel the same way.)
One would hope that it was designed to be durable from its inception, since it's quite clear that this area will likely receive many impacts over the course of the device's life, whenever the phone is put down without caution.
Click to expand...
Click to collapse
The fear is real. Really hoping that one was a freak accident. Ringke Slim case, apparently.
PhoenixTank said:
The fear is real. Really hoping that one was a freak accident. Ringke Slim case, apparently.
Click to expand...
Click to collapse
I've been on the fence about returning mine because I've been wary about how much protection it provides. Looks like I have the answer to the question I already knew.
PhoenixTank said:
The fear is real. Really hoping that one was a freak accident. Ringke Slim case, apparently.
Click to expand...
Click to collapse
Wow. I certainly hope you're right and this was just a freak accident. According to the thread on reddit, it only dropped about 1m, from a table onto the floor...
This is just one report (albeit a concerning one) - and it's still far too early to gauge if there is an issue here. At this time all we can do is wait and see (and try not to drop our phones).
On the subject of cases, bumpers, etc. I'm with the minority of those who go without - I like to use the device as it was designed. While I can appreciate the protective benefits a casing may offer, it's always visually apparent when there's a case on, (even the clearest/thinnest ones), and there is always some increase in size when it comes to handling, no matter how minimal. With the elephantine devices we have today, the 'bare' phones are big enough already. The 5X should have had much smaller top & bottom bezels, there's no need for it to be this tall. I wouldn't resent the large phones so much, but there are very few, if any, decent options for those of us who prefer smaller (around 5.2") phones.
I do use pouches/sleeves, but of course the phones are exposed when I'm actually using them, or if they're sitting on a table outside of their pouch. Over the course of a few years, I have accidentally dropped my phones a few times (Galaxy Nexus & Oneplus One, not the 5X thus far), and they have never received anything more than a few scuffs & minor scratches, of course their camera housings didn't protrude as far as that of the 5X.
Personally, I won't be concerned about the durability of the camera or the device in general until it's clear that there's an issue.

Categories

Resources