Develop Bugs

[STOCK] H815 10C STOCK ROM + KDZ [system + boot + modem + bootloader]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are for the H815 variant only. Files are from software version 10C.
Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. KDZ is also included.​
Requirements:
You must have TWRP 2.8.7+ installed to use these files. Thanks to Dees_Troy as always for that. And, of course, you must have your bootloader unlocked for TWRP to work. Please do not ask if "model x" is supported... did you unlock via LG's official unlock tool? Yes? then you can use it. No? then you can't.
*note*
the original KDZ file was named 10B but build.prop shows 10C... therefore I am going with the 10C name for now.
ro.lge.swversion=H81510c
ro.lge.swversion_short=V10c
ro.lge.swversion_shortdate=V10c_11-JUN-2015
ro.lge.factoryversion=LGH815AT-00-V10c-GLOBAL-COM-JUN-11-2015+0
Downloads:
ROM:
LG-H81510C-Flashable.System.Boot.zip
100% stock untouched system/rom and stock boot.img (kernel + dtb + ramdisk).
Not going to upload a rooted image this time... just a waste of space. Easier to just flash stock/untouched rom then flash the SuperSU zip from Chainfire... or just let TWRP root it (when you go to reset to system, if TWRP detects no root it will ask if you want TWRP to root you).
Latest SuperSu zip can always be downloaded here - download.chainfire.eu/supersu
Thanks as always to Chainfire for maintaining SuperSU!
Extras:
TWRP-Flashable stock extras. If you ever need to restore the modem, boot or bootloader.. these are the files that make it easy.
LG-H81510C-Flashable.Modem.zip
This is a flashable stock 10C modem.
LG-H81510C-Flashable.Boot.zip
This is a flashable stock 10C boot.img. Boot.img contains kernel + dtb + ramdisk.
LG-H81510C-Flashable.Bootloader.zip (updated link!)
This is a flashable stock 10C bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz.
Also, KDZ + all stock images for 10C are available here (minus system)
CODEFIRE DIRECTORY
#TEAMCODEFIRE
Click to expand...
Click to collapse
y u quote OP?

Yeah! Nice work!
Envoyé de mon LG-H815 en utilisant Tapatalk

Did I tell you today how much I love you?

Omg!! Thanks in advance!! I have just updated from twrp 2.8.6.1 to 2.8.7.0
Enviado desde mi LG-H815 mediante Tapatalk

OK fixed zips are up. Just use the newest 2.8.7 official TWRP and all good to go.
Will get around to making a proper (and safe) bootloader zip at some point today. Not really needed right this second... system/boot/modem should keep y'all entertained for now.

So, with this i can block again the bootloader ?

Th3PorTuGa said:
So, with this i can block again the bootloader ?
Click to expand...
Click to collapse
if by block you mean "re-lock".. then no. it can return you to stock.. but as LG explained on their unlock page... you cannot relock.

Oh, ok thanks....

Thanks.... Very stupid question. Just flash the zip via TWRP. Wipe cache.... And I am updated to B?

Ok thanks. All is ok.
Scroll and tap seems to be really better.
But one question, have we got a changelog for this update?

Thanks @autoprime was easy as pie to install on rooted EU model (NL) so far feels snappy as hell, typing (SwiftKey) goes better than it did, will keep an eye on everything tomorrow!

Thanks @autoprime! Flashed this and it's working perfectly

Hello everybody,
I have one question. For complete convert from 10a to 10c I must flash all zips?
First system, second modem and last step is bootloader flash?
Thank you for answer
Have a nice day for all

Thanks!!!
Work great
49172 antutu

Hoffmanns said:
Hello everybody,
I have one question. For complete convert from 10a to 10c I must flash all zips?
First system, second modem and last step is bootloader flash?
Click to expand...
Click to collapse
Flashing the main zip will do, the other zips are for troubleshooting/problem purposes :good:

Hey guys , i just got my g4 yesterday , i was wondering if 10c is fixing the tap issue , and are you guys feeling a difference from 10a
Thanks
( about to unlock that monster )
Edit : thanks @autoprime for the hard work you put here

Higuys,
I have tried updating both from twrpand from kdz file but I am still getting 10b as build number.
What am I doind wrong?
Thanks

@gazouille : You have a carrier variants ? Or your G4 is unlocked ?

Dougi said:
Hey guys , i just got my g4 yesterday , i was wondering if 10c is fixing the tap issue , and are you guys feeling a difference from 10a
Thanks
Click to expand...
Click to collapse
Well at first I thought there was a real difference, and maybe SwiftKey is just creating a mess, but feels mostly like before. Switching back to Google Keyboard.

baptiste28 said:
@gazouille : You have a carrier variants ? Or your G4 is unlocked ?
Click to expand...
Click to collapse
unlocked one ! why ?

[Recovery][ZE500KL] TWRP 3.0.2-0 Recovery (UNOFFICIAL) Marshmallow 6.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
https://github.com/sabpprook/android_device_asus_ze500kl/releases
Install
reboot fastboot
Code:
adb reboot bootloader
boot TWRP recovery image
Code:
fastboot boot twrp-3.0.2-0-ze500kl.img
flash recovery image in TWRP (optional)
Notice: This TWRP will automatically unlock bootloader
Source Code
https://github.com/sabpprook/android_device_asus_ze500kl

Nice work,bro!
Thank you very much!

Have anyone tried to flash it using flashify?

Jhyrachy said:
Have anyone tried to flash it using flashify?
Click to expand...
Click to collapse
Yes,work

It works. But i was unable to install a ROM ZIP file from ASUS Website. It says that the zip file is for WW_PHONE (I know !!) but my phone is a OMNI_ZE500KL.. What ?? What is this ? Never heard about this before. My problem is here :
http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004

@sabpprook:
Hey buddy, can I ask what your /init.restore.sh is doing and what is it's point?
https://github.com/sabpprook/androi...lob/android-5.1/recovery/root/init.restore.sh

LuK1337 said:
@sabpprook:
Hey buddy, can I ask what your /init.restore.sh is doing and what is it's point?
https://github.com/sabpprook/androi...lob/android-5.1/recovery/root/init.restore.sh
Click to expand...
Click to collapse
there is a trick on this phone when you boot not official boot or recovery image,
it will get stuck in boot logo if you reboot.
the solution is to restore aboot-bak to aboot partition, so that's what i did in "init.restore.sh" script.

sabpprook said:
there is a trick on this phone when you boot not official boot or recovery image,
it will get stuck in boot logo if you reboot.
the solution is to restore aboot-bak to aboot partition, so that's what i did in "init.restore.sh" script.
Click to expand...
Click to collapse
I'd suggest using /dev/block/bootdevice/by-name/aboot instead.
Sent from my ASUS_Z00TD using Tapatalk

Fus_XDA said:
It works. But i was unable to install a ROM ZIP file from ASUS Website. It says that the zip file is for WW_PHONE (I know !!) but my phone is a OMNI_ZE500KL.. What ?? What is this ? Never heard about this before. My problem is here :
http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004
Click to expand...
Click to collapse
Do not flash official ROM zip in TWRP recovery, try it in official recovery or modify the ROM zip script.

I cannot decrypt my storage using this

sabpprook said:
Do not flash official ROM zip in TWRP recovery, try it in official recovery or modify the ROM zip script.
Click to expand...
Click to collapse
I am not an android program-maker. I don't know anything about that. I will wait for an custom rom. As I posted here http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004, Original recovery is unable to flash. It's weird !!!
Anyway, very good job for this twrp. It gives me hope !!!

This TWRP, suitable for ZE500KG ?

Please,
I was waiting so long (2 months now, i check almost every day) for a custom ROM to flash my ZE500KL, but it seems that no developper is interested to build it... so, please, is there anyone who own a ZE500KL (of course, a working device ), who can do a TWRP backup, who can upload it in a server (in zip or rar), so i can download it and do a restore to my poor device ? Please
Thank you :fingers-crossed:

Fusxda said:
Please,
I was waiting so long (2 months now, i check almost every day) for a custom ROM to flash my ZE500KL, but it seems that no developper is interested to build it... so, please, is there anyone who own a ZE500KL (of course, a working device ), who can do a TWRP backup, who can upload it in a server (in zip or rar), so i can download it and do a restore to my poor device ? Please
Thank you :fingers-crossed:
Click to expand...
Click to collapse
Join #titandev @ freenode or add me on hangouts ( https://plus.google.com/108108436166506337243 ) I will help you restoring stock ROM.

Fusxda said:
Please,
I was waiting so long (2 months now, i check almost every day) for a custom ROM to flash my ZE500KL, but it seems that no developper is interested to build it... so, please, is there anyone who own a ZE500KL (of course, a working device ), who can do a TWRP backup, who can upload it in a server (in zip or rar), so i can download it and do a restore to my poor device ? Please
Thank you :fingers-crossed:
Click to expand...
Click to collapse
Thank you in advance :good:
The best i've done till now is to :
- download the .222 stock rom from Asus
- Extract it, and edit the update-script to remove the 4 first line talking about device kind
- Recompress in ZIP and flash through this TWRP 3.0.0.0 (it's weird that stock recovery can't flash the original ZIP) ==>> no more error device, it said that it succeed
But it don't really fix all problems :
- The device is booting and i can access the welcome screen, but either it stucks and reboot automatically after 3 or 4 minutes, or stucks and i have to remove battery, or i have a lot of errors like "goggle play stopped" or "process.xxxx stopped" or something like these
All details concerning the problem is there http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004

Tested and Flashed on a ZE500KG, It works flawlessly!

Forgive me if this is a noob question, but does this also work on ZE551KL, or should I stick with this one

wow, it's sweet.
maybe it's time for coming back for ZE500KL.

Cyanogenmod
I'm waiting for a cyanogenmod rom for asus zenfone 2 laser ze500kl.....please give me the link for working cyanogenmod rom.....thanks in advance......

aepio said:
I'm waiting for a cyanogenmod rom for asus zenfone 2 laser ze500kl.....please give me the link for working cyanogenmod rom.....thanks in advance......
Click to expand...
Click to collapse
There's no CM for it.
Sent from my ASUS_Z00TD using XDA Labs

Root Blackview A5 Marshmallow

Hi guys,
recently bought this A5 at reasonable price( 50$). It goes fast as any other 4-core brand named device i have seen. But it came with much bloatware such as a search service that somehow i cant stop. I must disable it once a day and then again tsoup! it is on again...Anyway that's why my first thought was rooting the device.
Sometime ago i rooted and old samsung with just a click. But this blackview seems to be solving the circle square. No support, google says little only some russians i can not understand.
So, to end this story i need help to root this device. Flash a modded preinstalled rooted version maybe?
Thanks in advance...
Edit: Managed to root it finally. just flash supersu via twrp(3.03 custom recovery image from needrom site)...8 hours piece of cake ^-^. Thank god for the last beta version 2.79 SR3 201xxx of supersu. All the other version had me to bootloop.

Hi there, please tell me how you did it. Some links to the correct files would be great.
Kind regards, Skyfire

Skyfire1 said:
Hi there, please tell me how you did it. Some links to the correct files would be great.
Kind regards, Skyfire
Click to expand...
Click to collapse
I´m still looking for a custom recovery... Please help

Skyfire1 said:
I´m still looking for a custom recovery... Please help
Click to expand...
Click to collapse
Sorry for the delay, just go to needrom.com under blackview section u will find many costum twrp. I used the 3.03 version. U will also need sp_flashtools, adb drivers and a mt6580 scatter file to flash the twrp from your pc. Let me know if u need any help.

Skyfire1 said:
I´m still looking for a custom recovery... Please help
Click to expand...
Click to collapse
ok, needrom site seems to delete many blackview files, so i'll share what i used to root it...

Thank you very, very much !!!! You made my day!!!!!!!!!!!!!! TWRP is installed and installing CM 13 was done in a blink of an eye.
Kind regards, Skyfire

shot00 said:
ok, needrom site seems to delete many blackview files, so i'll share what i used to root it...
Click to expand...
Click to collapse
I flashed the recovery.img with sp flash but when I enter recovery mode, twrp doesn't show up...
Instead, the stock recovery mode boots up.
sp flash says that the flash was successfull but it doesn't work out for me...
btw I only flashed the recovery.img. I didn't flash any boot.img or anything else.
any ideas what went wrong?

Limio said:
I flashed the recovery.img with sp flash but when I enter recovery mode, twrp doesn't show up...
Instead, the stock recovery mode boots up.
sp flash says that the flash was successfull but it doesn't work out for me...
btw I only flashed the recovery.img. I didn't flash any boot.img or anything else.
any ideas what went wrong?
Click to expand...
Click to collapse
That's hell of a problem...did u select the scatter file in sp tools? maybe your firmware is different version? if i remember correct there are 3 versions of blackview A5. I have the A5_C1_Blackview_SD_Q20160709. If different then u must find a twrp for your version..Sorry mate

There is a thread over at 4pda with different versions of twrp but the links are all down. Maybe if you find somebody that speaks russian ore use google translate you can get it there.

Today my new A5 arrived and of course I wanted to root it.
But I have a new Build number = A5_C1-Blackview_SD_Q20161010
Also the drivers are not working.
Does anybody ca help me out ?
thx in advance

My build = A5_C1_Blackview_VO.X_20160420
Would this be a good idea...? Or a bad idea...?
If I go into: Settings -> About phone -> Wireless update
There are no OTA updates available... But there is an option to install "Local updates". I can select the "SuperSU" zip but I get warnings about bricking the phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, would this produce desired results? Or brick the phone?
While I'm here, what about installing custom ROMs, eg one of the 6.0.1 ROMs from needrom.com?

helo, i want to root my blackview 5, i already downloaded all files that should be used to preparing the root. but the problem here is all this files and procedures are odd for me. can you screen shoot how to root start at the beginning? tq

Please Help. .. Cannot root or install TWRP on Developers Edition Note 4 {SOLVED}

Hello folks.
I've have/had a rooted Verizon Developers Edition Note 4 (KitKat 4.4) for years now but decided I needed to upgrade to 6.0 since most apps wont run on 4.4 anymore. It had TWRP and Supersu.
So, I installed the latest Android firmware (6.0 Marshmallow) on my Verizon Developers Edition Note 4 (SM-N910V) found here (the full name of the TAR file is "N910VVRU2CQF2_N910VVZW2CQF2_N910VVRU2CQF2_HOME.tar.md5").
I installed it with Odin 3.12.3
It installed fine but I guess it erased my root and TWRP.
So when trying to install TWRP via Odin 3.10.6 as specified in this thread it comes up with the following
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
I don't remember it having this problem before.... idk its been so long. I also tried this with Odin 3.12.3 and same result.
Anyway I went to try to install TWRP via this adb method and that came up with this....
What?! Please help!! What should I do?? Again I have the Developers Edition... Yes I made a full system TWRP backup onto my SD card before doing any of this but since I cant access TWRP idk how I would revert (not that I want to anyway - I'd like to keep Marshmallow 6.0 since apps are not longer compatible with KitKat 4.4).

zdanman said:
.
Click to expand...
Click to collapse
Can you send a photo of the phone in Download mode?
(Is it written Mode Developer or Retail Normal?)
If you get a "Retail Bugs":
Download Rom Stock Original: N910VVZW2BPA1,
Put in Download mode and install on Odin;
Get Root Temp in Kingroot, and Bootloader Unlock (is a Mod-Retail-to-Develop); (link: https://forum.xda-developers.com/no...guide-step-step-stock-n910v-6-0-1-to-t3426905)
And, Download mode, put TWRP.
(Take Stock Rom in TWRP!! Not in Odin!!)

Here is the download screen:
As you can see it says:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK : OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START

maxnuk said:
Download Rom Stock Original: N910VVZW2BPA1
Click to expand...
Click to collapse
That is Android 5.0 Lollipop.... is lollipop like the last rootable version of note 4 or something?

zdanman said:
That is Android 5.0 Lollipop.... is lollipop like the last rootable version of note 4 or something?
Click to expand...
Click to collapse
Your Note4 is not Developer Edition...
(Remove the battery and look written on the device if it really is a developer edition.)
Do this Tuto: https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
To Get Fake Developer Edition, and TWRP/Root,
and you get any rom stock (not in Odin, TWRP!).

HELP!!!! got to step 40 and now the calibration is OFF (i have to press screen an inch above the object im pressing!!!) I read about the #2663# but that doesnt work on verizon phones!!! help
and yes it says "DEVELOPER DEVICE" under the battery... it is the Developer Edition... I paid $800 flat out for it years ago.

maxnuk said:
Your Note4 is not Developer Edition...
(Remove the battery and look written on the device if it really is a developer edition.)
Do this Tuto: https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
To Get Fake Developer Edition, and TWRP/Root,
and you get any rom stock (not in Odin, TWRP!).
Click to expand...
Click to collapse
Change of thread....
https://forum.xda-developers.com/note-4-verizon/general/please-help-doing-t3678486
it says "DEVELOPER DEVICE" under the battery... it is the Developer Edition... I paid $800 flat out for it years ago.

zdanman said:
Change of thread....
Click to expand...
Click to collapse
XD Keep Calm, i helping you,
The full/partial firmware & bootloaders are FOR RETAIL EDITION ONLY!
Get Root in Odin: https://download.chainfire.eu/590/CF-Root/CF-Auto-Root/CF-Auto-Root-trltevzw-trltevzw-smn910v.zip
For MMB29M.N910VVRU2CQF2 Developer.
And Take TWRP/SU.

See other thread
https://forum.xda-developers.com/note-4-verizon/general/please-help-doing-t3678486

What if I have the same problem for my verizon samasung galaxy note 4, with the same version (SM-N910V) and same everything in download mode, but I don't have a developer device...

Andy821 said:
What if I have the same problem for my verizon samasung galaxy note 4, with the same version (SM-N910V) and same everything in download mode, but I don't have a developer device...
Click to expand...
Click to collapse
You mean you're having probs installing TWRP.... ?
DISCLAIMER THIS MAY BRICK YOUR PHONE OR IT MAY NOT... read the two links... DO AT YOUR OWN RISK
Did you unlock your bootloader as done on this page and step 24 here aswell... ?
If so then you should be able to install TWRP 3.0.2 via Odin in download mode after you manage to do that.... DO NOT USE A TAR MAKER OR SOME OTHER WAY OF OBTAINING TWRP AS IT WILL RUIN YOUR CALIBRATION.... MAKE SURE IT IS AN OFFICIAL TAR.MD5 file that you use!

zdanman said:
You mean you're having probs installing TWRP.... ?
DISCLAIMER THIS MAY BRICK YOUR PHONE OR IT MAY NOT... read the two links... DO AT YOUR OWN RISK
Did you unlock your bootloader as done on this page and step 24 here aswell... ?
If so then you should be able to install TWRP 3.0.2 via Odin in download mode after you manage to do that.... DO NOT USE A TAR MAKER OR SOME OTHER WAY OF OBTAINING TWRP AS IT WILL RUIN YOUR CALIBRATION.... MAKE SURE IT IS AN OFFICIAL TAR.MD5 file that you use!
Click to expand...
Click to collapse
So you are on marshmallow with a locked bootloader? Just to be clear , you kind of just jumped in at the end of the thread stating you have the same problem (u dont he messed up a dev device by taking a retail update then complicated the problem by using a bizarre method to flash custom recovery and now his calibration is messed up) or did you simply mean your device keeps failing flash?

Oxygen OS 11.BE86AA Global Rom and Magisk Boot Files

Hey Guys,
I'm posting a link to the July, 2021 OTA update for OnePlus Nord N10 5G Global Edition (NOT Metro or T-Mobile) as well as boot.img and the patched version. I extracted the boot image from payload.bin and patched with Magisk. I successfully rooted without custom recovery (ie TWRP) and am currently passing both CTS and Basic Integrity. Check everything below to make sure your version matches up before you flash anything. Proceed at your own risk. I am not responsible for any bricked devices.
Build: BE2026_17_210713
Baseband: 1.c5-00019-BITRA_GEN_PACK-2.404869.8.407035.5
OnePlusN10Oxygen_14.O.30_GLO_0300_2107132209.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi, I'm currently on Pixel Experience. I'd like to get back to Oxygen now that the update is out finally. What is the best course of action with PE/PE's recovery installed right now? Sorry to be a bother, but I've been out of the scene for 5-6 years and am trying to get my bearings again.

yesterday i go back to stock from Pixel Experience, flash with MsmDownloadTool and all ok. Is the same process here?

HI,I cant unlock my BL,after I update your ROM,how to install magisk？

How did you get a hold of the payload.bin? I can't find it on their website.

this update turned my oneplus into a brick after rooting, after not doing anything different with my phone from prior when it was on 10

I don't get it did you put the patched img back into payload bin because I flasked the zip with system update no root

w9909989 said:
HI,I cant unlock my BL,after I update your ROM,how to install magisk？
Click to expand...
Click to collapse
If you don't know how to unlock your bootloader you better not even think about doing anything else to your device.
sploders101 said:
How did you get a hold of the payload.bin? I can't find it on their website.
Click to expand...
Click to collapse
It's in the rom zip.

scottlam1 said:
I don't get it did you put the patched img back into payload bin because I flasked the zip with system update no root
Click to expand...
Click to collapse
It looks to me if the boot images were ever on this thread they are not here now. I see a link to oos 11 but no links to the boot images. There is another XDA thread where another user has posted the boot and patched boot files if you need them.

mixlex said:
如果你不知道如何解锁你的引导加载程序，你最好不要考虑对你的设备做任何其他事情。
它在 rom zip 中。
Click to expand...
Click to collapse
I know hot to unlock BL.but my device just from metro,I can't unlock it.IMEI NO SUPPORTED

w9909989 said:
I know hot to unlock BL.but my device just from metro,I can't unlock it.IMEI NO SUPPORTED
Click to expand...
Click to collapse
Ok, sorry but no unlock...no root

mixlex said:
It looks to me if the boot images were ever on this thread they are not here now. I see a link to oos 11 but no links to the boot images. There is another XDA thread where another user has posted the boot and patched boot files if you need them.
Click to expand...
Click to collapse
Just a post that didn't even need to be made then you can get the zip from OnePlus or oxygen updater and boot img from the root n10 post I thought he managed to implement the patched boot.img into zip which is what I was hoping for I have a metro phone on this firmware switched from a modified msm so I was hoping I could circumvent locked bootloader

scottlam1 said:
Just a post that didn't even need to be made then you can get the zip from OnePlus or oxygen updater and boot img from the root n10 post I thought he managed to implement the patched boot.img into zip which is what I was hoping for I have a metro phone on this firmware switched from a modified msm so I was hoping I could circumvent locked bootloader
Click to expand...
Click to collapse
Yeah, I do my own. Full rom was readily available on one plus updater.

mixlex said:
Yeah, I do my own. Full rom was readily available on one plus updater.
Click to expand...
Click to collapse
Yeah I pull my stuff right through msm tool all the metro people are in the same boat OnePlus claims they can't give unlock tokens for metro n10 they blame metro yesterday I filed an fcc complaint for OnePlus maybe it will get them orr their asses

@Eliliyah
Eliliyah said:
Hey Guys,
I'm posting a link to the July, 2021 OTA update for OnePlus Nord N10 5G Global Edition (NOT Metro or T-Mobile) as well as boot.img and the patched version. I extracted the boot image from payload.bin and patched with Magisk. I successfully rooted without custom recovery (ie TWRP) and am currently passing both CTS and Basic Integrity. Check everything below to make sure your version matches up before you flash anything. Proceed at your own risk. I am not responsible for any bricked devices.
Build: BE2026_17_210713
Baseband: 1.c5-00019-BITRA_GEN_PACK-2.404869.8.407035.5
Click to expand...
Click to collapse
Hey @Eliliyah I've got the exact Phone (model: BE2026) running OxygenOs 11.0.2.BE86AA and same Kernal Version: 4.19.125-perf+
But my build # and Baseband are slightly different.
Build Number: BE2026_17_210930
Baseband Version: 1.c5-00019-BITRA_GEN_PACK-2.437866.2.439624.2
Would it be safe to flash your zip file?