Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Sony Ericsson Xperia Arc, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Arc
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest version: update-cm-7.1.0.1-XperiaArc-LT15i
Download: http://goo-inside.me/cm/anzu/stable/update-cm-7.1.0.1-XperiaArc-LT15i-signed.zip
MD5sum: c10dd9c80e7887a42fda7f6a6496b580
Google Apps addon:
Version: gapps-gb-20110828
Mirror: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
Version: New GTalk addon
Mirror: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-newtalk-signed.zip
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
SOURCE : http://forum.cyanogenmod.com/topic/32755-cyanogenmod-7-for-the-xperia-arc-v7101-11-oct-2011/
Thanks.
dubist said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Sony Ericsson Xperia Arc, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Arc
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest version: update-cm-7.1.0.1-XperiaArc-LT15i
Download: http://goo-inside.me/cm/anzu/stable/update-cm-7.1.0.1-XperiaArc-LT15i-signed.zip
MD5sum: c10dd9c80e7887a42fda7f6a6496b580
Google Apps addon:
Version: gapps-gb-20110828
Mirror: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
Version: New GTalk addon
Mirror: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-newtalk-signed.zip
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
SOURCE : http://forum.cyanogenmod.com/topic/32755-cyanogenmod-7-for-the-xperia-arc-v7101-11-oct-2011/
Click to expand...
Click to collapse
is this a final version of cyanogenmod for arc and its stable...?
yes it is the stable version
Can I use this guide for ARC S? Are the kernels compatible?
will try and report back tommorow, thanks
Just want to know...when using cm7 can we aplied script tweak or change build.prop or init.d on arc like v6 supercharger or something similiar...or cm7 is fast enough that we dont need those tweak anymore...?
Thanks great job
i cant register on any mobile network =(
is it beacuse i have an LT15a and it shows up as LT15i??
EDIT: found what i was missing could u please add to this post too that you have to be on 4.0.A.2.368_Generic Global.ftf to get gsm signal, thanks!
Superfast =)
Sent from my LT15i using xda premium
this is the same as FXP041?
Why create another thread just for this?
There's already the official dev thread where you can find the how-to and you can download the rom and the gapps...
kistigun said:
this is the same as FXP041?
Click to expand...
Click to collapse
Same question here....
what is this? can you upload some photos or something or can FXP tell us something about this
spideras said:
Same question here....
what is this? can you upload some photos or something or can FXP tell us something about this
Click to expand...
Click to collapse
I think it's the same as FXP041, just the zip file is named differently...
EDIT: Ok, strange, there is a 701 KB difference between the two zip files... Hmmm.... Could anyone clarify this?
crimilde said:
I think it's the same as FXP041, just the zip file is named differently...
EDIT: Ok, strange, there is a 701 KB difference between the two zip files... Hmmm.... Could anyone clarify this?
Click to expand...
Click to collapse
are you sure, the buil.prop files are different
kistigun said:
are you sure, the buil.prop files are different
Click to expand...
Click to collapse
I had a better look and you're right...
Maybe it's the update J mentioned in the FXP thread with the fully supported ANT+?
can anyone test it?i dont have my Arc today to test it
spideras said:
can anyone test it?i dont have my Arc today to test it
Click to expand...
Click to collapse
Tested.. I didn't feel any change from FX041 :s
why is the build number is 3.0.1.A.0.145 but not 286....
spideras said:
can anyone test it?i dont have my Arc today to test it
Click to expand...
Click to collapse
i've tried is but i cant flash the boot.img thats provided
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Additonal source code for Ascend Mate 7: https://github.com/Demelza/android_device_huawei_mt7_l09
Additonal source code for Honor 6: https://github.com/honor6-dev
KNOWN ISSUES
- Bluetooth audio not properly working
WONTFIX
- Infrared
- FMRadio
- MHL
- DualSIM support
- EAP-SIM
- USSD-Code execution
- Fingerprint scanner
READ BEFORE FLASHING!
These builds are NOT official and will never be!
Do not submit bug on CyanogenMod issue tracker
HOW TO INSTALL CM?
Unlock your bootloader else flashing via fastboot will be impossible
Upgrade your phone to the latest available stock rom (to get latest bootloader and baseband firmware)
Download ClockworkMod Recovery for your specific variant
Download CyanogenMod for your specific variant
Download Google Apps
Copy CyanogenMod and Google Apps zips to your external sdcard
Flash ClockworkMod Recovery via fastboot. (fastboot flash recovery cwm-mate7_YYYYMMDD.img)
Reboot into ClockworkMod Recovery
Do a Data wipe / Factory reset (This is IMPORTANT!)
Flash CyanogenMod zip
Flash Google Apps zip
Goto "Mounts & Storage" and select "Format /data and /data/media" (This is also IMPORTANT!)
Reboot and Enjoy
If you're getting error messages while trying to flash the CyanogenMod zip, THEN FOLLOW THE ABOVE INSTRUCTIONS.
Especially the part where it says "Flash ClockworkMod Recovery".
The ClockworkMod Recovery you've got from somewhere else is FAULTY!!!
WHERE TO GET CM?
Unofficial builds:
MT7-L09: cm-11-20150410-UNOFFICIAL-mt7_l09.zip - 243 MB
Google Apps:
https://www.androidfilehost.com/?fid=95832962473395379
Old builds:
None yet
HOW TO GO BACK TO STOCK ROM?
Download B127 stock firmware - 1.26 GB (ONLY FOR L09 !!!)
Extract it
Copy the Update.app into DLOAD folder on your external sdcard (sdcard1/DLOAD/Update.app)
Power off phone
Hold all 3 Buttons till "Fastboot & Rescue Mode" appears. Flashing should start automatically.
HOW TO BUILD CM FROM SOURCES?
http://forum.xda-developers.com/showpost.php?p=60019676&postcount=2
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks to all contributors, especially codeworkx, without whom this project wouldn't even exist!!!
XDA:DevDB Information
CyanogenMod 11 for Ascend Mate 7 (MT7-L09), ROM for the Huawei Ascend Mate 7
Contributors
Demazda, codeworkx
Source Code: https://github.com/Demelza/android_device_huawei_mt7_l09
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-04-10
Created 2015-04-10
Last Updated 2015-04-10
Reserved
HOW TO BUILD?
1. Prepare your build environment and get the CM11 sources. Read the official CM wiki if you don't know how.
2. Add our local manifest
https://raw.githubusercontent.com/Demelza/manifests/cm-11.0/local_manifest.xml (goes to .repo/local_manifests/local_manifest.xml)
3. repo sync -j10
4. Run following commands to start building:
Code:
. build/envsetup.sh
lunch cm_h60_l01-eng
brunch cm_h60_l01-eng
Currenlty supported: cm_h60_l01-eng
Code:
Yes, h60-l01 is the identifier for Honor 6. The .zip will also be named "cm-11-YYYYMMDD-UNOFFICIAL-h60_l01.zip" if you build it yourself. But it'll flash and work on Mate 7 too.
Very nice, unfortunately it can no longer wake up after some time. Screen remains black.
Fooox1 said:
Very nice, unfortunately it can no longer wake up after some time. Screen remains black.
Click to expand...
Click to collapse
I've had this bug with my first build, but I uploaded another one a couple hours after, which does not have this bug. You can redownload and retry if you want.
Quick question: how is this ROM different from the other CM11 4.4.4 ROM that's available?
AhsanU said:
Quick question: how is this ROM different from the other CM11 4.4.4 ROM that's available?
Click to expand...
Click to collapse
It's more up-to-date and it's open-sourced. Other CM11 rom doesn't have source available.
Works great! Thank you for your efforts! =)
Whats wrong whith this rom ?!
before i have installed this rom i dont have problems with "cm-11-20150205-UNOFFICIAL-mate7" but with this -11-20150410-UNOFFICIAL-mt7_l09 i have errors Status 7 and when i del "getprop" from update-script i have status 4 .......
Who can help me ?! I have a Huawei Ascend MAte 7 TL10
EDIT://
only what i have do is i update CWM to 6.0.5.1
Hello everybody
I cannot install this ROM.
In recovery I get error status 7 (kinda "this ROM is for MT7-09, your device is H60" i don't remember exactly...). I tried to flash the CMW recovery provided by Demazda in the thread [RECOVERY][CWM] ClockworkMod Recovery 6.0.5.1 for Ascend Mate 7 (MT7-L09), but i get error message (target reported max download size of 471859200 bytes error: cannot load 'cwm_mate7_20150410.img': NO error).
The CMW recovery I'm running now is v.6.0.5.1: the one I flashed when I rooted and that I use for backups and to flash the ROM I'm using now MK44.4(CM11)(4.4.4).
Any suggestions?
Thanks...
leonardus_magnus said:
Hello everybody
I cannot install this ROM.
In recovery I get error status 7 (kinda "this ROM is for MT7-09, your device is H60" i don't remember exactly...). I tried to flash the CMW recovery provided by Demazda in the thread [RECOVERY][CWM] ClockworkMod Recovery 6.0.5.1 for Ascend Mate 7 (MT7-L09), but i get error message (target reported max download size of 471859200 bytes error: cannot load 'cwm_mate7_20150410.img': NO error).
The CMW recovery I'm running now is v.6.0.5.1: the one I flashed when I rooted and that I use for backups and to flash the ROM I'm using now MK44.4(CM11)(4.4.4).
Any suggestions?
Thanks...
Click to expand...
Click to collapse
Have you tried redownloading the CW image? Could be corrupt?
Thanks for getting this build going, Demazda. I was on the fence about flashing CM given the other CM build had Chinese bloatware in it, but now there's this clean version . I flashed it last night, and now there's no more lag when swapping apps or scrolling like stock has. It's almost like there's some decent NAND in there .
Why is the fingerprint scanner in the won't fix list? Is it because it's reliant on some proprietary blobs or ?
Also is there any reason I'm seeing a red outline around some apps that flashes for a quick second? I've noticed it a lot in Chrome, but it isn't just that. Just me?
NiceCarpet said:
Have you tried redownloading the CW image? Could be corrupt?
Click to expand...
Click to collapse
Thanks for your suggestion. I already solved. I flashed the stock recovery and than I flashed the CMW recovery provided by Demazda. THan I flashed without any issue this ROM...
I like it very much but I prefer the MK44.4... I miss PIE controls and I do no like PIE available with gravityBox. Thanks to Demazda for his work, anyway.
so i got my mate7 on monday and thanks to this thread i unlocked/rooted it today (thanks Demazda!!!). it took me awhile but i finally got CM11 installed and WOW!! i erased/reset my nexus 5 and gave it to my dad cause i now have the best phone ever! i hope to acquire some skills for android over the summer so that i could help out in developing for the mate7. hopefully PAC-ROM will be available some day. thanks for all the hard work to all that contribute to this great cause!
wifi....
Sometimes do not Wi-Fi....
0 WiFi issues here. Could you elaborate?
Really thanks demazda.
I install it yesterday and everything is working good (right now).
I just revert back the DPI to 480 because it's to small for my opinion and some app (launcher and others) don't display good with 320DPI.
Just a question, with this ROM as a base can we expect some port of other KK rom ? did you plan to update it ?
Really want to use this, since i love the material look you can give to it.
Unfortunately, i won't try to use this, since i really need the fingerprint scanner on the device.
Isn't there any way to fix it?
Djordie said:
Really want to use this, since i love the material look you can give to it.
Unfortunately, i won't try to use this, since i really need the fingerprint scanner on the device.
Isn't there any way to fix it?
Click to expand...
Click to collapse
Don't Expect any fingerprint for custom ROM, the sourcecode isn't available and huawei don't release any code (as i know) for that. only the kernel is available and i don't think the code for this is inside kernel.
After 2 days of use it's working good, BT audio don't work at all like demazda say in OP and i really need it so i cannot use as daily rom until someone fix it.
Wait for the futur
Demazda said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Additonal source code for Ascend Mate 7: https://github.com/Demelza/android_device_huawei_mt7_l09
Additonal source code for Honor 6: https://github.com/honor6-dev
KNOWN ISSUES
- Bluetooth audio not properly working
WONTFIX
- Infrared
- FMRadio
- MHL
- DualSIM support
- EAP-SIM
- USSD-Code execution
- Fingerprint scanner
READ BEFORE FLASHING!
These builds are NOT official and will never be!
Do not submit bug on CyanogenMod issue tracker
HOW TO INSTALL CM?
Unlock your bootloader else flashing via fastboot will be impossible
Upgrade your phone to the latest available stock rom (to get latest bootloader and baseband firmware)
Download ClockworkMod Recovery for your specific variant
Download CyanogenMod for your specific variant
Download Google Apps
Copy CyanogenMod and Google Apps zips to your external sdcard
Flash ClockworkMod Recovery via fastboot. (fastboot flash recovery cwm-mate7_YYYYMMDD.img)
Reboot into ClockworkMod Recovery
Do a Data wipe / Factory reset (This is IMPORTANT!)
Flash CyanogenMod zip
Flash Google Apps zip
Goto "Mounts & Storage" and select "Format /data and /data/media" (This is also IMPORTANT!)
Reboot and Enjoy
If you're getting error messages while trying to flash the CyanogenMod zip, THEN FOLLOW THE ABOVE INSTRUCTIONS.
Especially the part where it says "Flash ClockworkMod Recovery".
The ClockworkMod Recovery you've got from somewhere else is FAULTY!!!
WHERE TO GET CM?
Unofficial builds:
MT7-L09: cm-11-20150410-UNOFFICIAL-mt7_l09.zip - 243 MB
Google Apps:
https://www.androidfilehost.com/?fid=95832962473395379
Old builds:
None yet
HOW TO GO BACK TO STOCK ROM?
Download B127 stock firmware - 1.26 GB (ONLY FOR L09 !!!)
Extract it
Copy the Update.app into DLOAD folder on your external sdcard (sdcard1/DLOAD/Update.app)
Power off phone
Hold all 3 Buttons till "Fastboot & Rescue Mode" appears. Flashing should start automatically.
HOW TO BUILD CM FROM SOURCES?
http://forum.xda-developers.com/showpost.php?p=60019676&postcount=2
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks to all contributors, especially codeworkx, without whom this project wouldn't even exist!!!
XDA:DevDB Information
CyanogenMod 11 for Ascend Mate 7 (MT7-L09), ROM for the Huawei Ascend Mate 7
Contributors
Demazda, codeworkx
Source Code: https://github.com/Demelza/android_device_huawei_mt7_l09
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-04-10
Created 2015-04-10
Last Updated 2015-04-10
Click to expand...
Click to collapse
Sorry, but anyway to fix USSD-Code execution? if not, is there any replacement?
Just wanted to pop in and say thanks Demazda, for this good clean CM11 for my device.
While I really like the look of the stock ROM and all it's extra benefits. Cyan/AOSP is just so reliable and I never used my fingerprint scanner anyway. Looking forward to see how battery life compares, anyone have any thoughts on how big of a difference it is to the stock ROM battery life?
I've been using MK44.4 and decided to try this. When I try to flash, the installation is aborted and it's telling me that my phone is something other than it actually is and refuses to install. WTF?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.1 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Broken Features / Known Issues
audio lag in some games
dialer shows an ugly screen on incoming calls
drm support is broken (e.g. play movies)
package manager sometimes installs x86 libs when it needs arm libs (causes some apps to not work at all)
selinux enforcing mode
sim 2 cannot be disabled
sim 2 audio quality issues when also on a call on sim 1 (unconfirmed)
USB UMS (Mass Storage) - Killed off for now, MTP works just fine
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
CyanogenMod for Z00A/ ze551ml: ROM @ download.crpalmer.org
CyanogenMod for Z008/ ze550ml: ROM @ download.crpalmer.org
Recovery Links
Z00A
CM Recovery CM Recovery @ download.codefi.re/jrior001
theSSJ's TWRP: XDA thread
Official TWRP: TWRP.ME
Unofficial F2FS TWRP: jrior001's unofficial twrp
Z008
CM Recovery CM Recovery @ download.codefi.re/jrior001
Unofficial F2FS TWRP: jrior001's unofficial twrp
theSSJ's TWRP: XDA thread
Official TWRP: TWRP.ME - PENDING ACCEPTANCE
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps.
Flashable Modem updates:
Currently only supported in jrior001's unofficial TWRP
May or may not work in others
** see this post for more info **
Intel stores some modem firmware in the OTA's in a file labeled "ifwi.zip"
These are flashable zips to receive the updated firmware while staying on custom ROMS
**THIS IS A ONE WAY PROCEDURE, JUST LIKE THE OTA's THERE IS NO KNOWN WAY
TO FLASH BACK TO EARLIER MODEM FIRMWARE, PROCEED WITH CAUTION**
IF you still wish to proceed, current flashable ifwi zips are available HERE for Z00A AND Z008
XDA:DevDB Information
Unofficial CyanogenMod 12.1 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
crpalmer, jrior001, hharte
Source Code: https://github.com/CM-zenfone2
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 2.19.40.22 stock base
Version Information
Status: Beta
Created 2015-07-24
Last Updated 2015-10-02
Reserved
Known issues are know in the first post so that all the maintainers can updated it and keep it current.
FAQ
Does Official TWRP work?
* Only if they have the device called Z00A. As of the initial release the official TWRP did not but will likely soon be named properly.
* If it doesn't work,arecovery from the OP.
Can I use a custom kernel with these builds?
* No, there are no custom kernels build based off of our source tree, using our defconfig and which contain the proper ramdisk.
*Also, doing so makes any feedback useless to us because the kernel and the ROM are a complete package and changing part of that means you may have broken something beyond our control.
Will this be an Official ROM?
* When all the show stopping bugs are fixed and all the upstream commits are merged, yes.
* Until then, no because CyanogenMod has very high standards for accepting new devices.
What about the Z008 aka ze550ml?
* Right now none of the developers who are working on the development own one and therefore we can't support it.
* One of the developers working on this said he was purchasing one (even though he already owns the ze551ml). When he gets it and has time to work on it we may see it. Without us owning the device though, there will never be support for it.
Do I need to unlock the bootloader?
* Yes.
thanx Chris, a zillion people have been waiting for your hard work and quality as always , thankyou chris,,steve
Finally !!!!!!! Damm Finally !!! Thanks a lot man !! been waiting for this so long !! Finally some development !! Thank You
Finally.....cm 12.1 has landed on zenfone 2
knitesh813 said:
Finally.....cm 12.1 has landed on zenfone 2
Click to expand...
Click to collapse
This TWRP recovery work??
http://forum.xda-developers.com/zenfone2/development/alpha-tethered-twrp-asus-zenfone-2-t3123532
Thank You for your work!
john_petrucci said:
This TWRP recovery work??
http://forum.xda-developers.com/zenfone2/development/alpha-tethered-twrp-asus-zenfone-2-t3123532
Click to expand...
Click to collapse
Cannot confirm but there should be an official twrp update later today that will for sure.
Sent from my ASUS_Z00A using XDA Free mobile app
Just as info and to avoid questions: My TWRP should be working here as ro.product.device is set to Z00A
OMG....OMG......can't wait to flast it....!
Please someone give me a review.
How about memory leak?
How about battery?
Thankyou very much
Ready to Flash... Thxxx Guyss. was waiting for soo long
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
allasca said:
Please someone give me a review.
How about memory leak?
How about battery?
Thankyou very much
Click to expand...
Click to collapse
Give it a try...
Cheers for the hardwork.
Accept donations?
allasca said:
Please someone give me a review.
How about memory leak?
How about battery?
Thankyou very much
Click to expand...
Click to collapse
I am using the 2gb/16gb ZE551ML and I have around 600-1gbmb free at any given time (OS is only doing around 800mb-1gb so I'd imagine the 4gb should have 3gb+ free). Now battery life, loving it, around 1% every 5-7 minutes with the screen on
crpalmer said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Whoop, there it is! :thumbup:
jrior001 said:
Cannot confirm but there should be an official twrp update later today that will for sure.
Sent from my ASUS_Z00A using XDA Free mobile app
Click to expand...
Click to collapse
Whoop, there it is!
FINALLY, thank you both so much for all your hard work, including @TheSSJ!
Sent from the Ace's MB865 using Tapatalk
Please provide a google drive link please...
Download is becoming unsuccessful
Does the second sim card work? From what I understand this is not supported by Cyanogen.
All set up using twrp on z00a..had to factory reset and then a reboot to get sim recognised..46,000 in antutu on this build...
Yahoooooo!!!!
Thank you very much devs...bloody amazing
working
ok i can confirm that @TheSSJ twrp flashed CM successfully[made a clean wipe other than microsd]
mtp is buggy for me sadly,cant transfer more than 1 file
camera totally black..maybe i doing something wrong.. my bad,have to wait for few seconds,,camera working
as said by op,first boot not showing sims,,have to restart
wifi,bluetooth,network,message,settings are working....others didnt check
and thanks for everyone who made the hardwork for this CM12.1
using ZE551ML 2gb version
maback said:
Does the second sim card work? From what I understand this is not supported by Cyanogen.
Click to expand...
Click to collapse
I have two sim cards and both work for telephony. You can even call yourself to and from your phone!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Ingress, Polaris Office, Chase Mobile, Showbox...
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
CyanogenMod for Z00A/ ze551ml: ROM @ http://get.cm/?device=Z00A
CyanogenMod for Z008/ ze550ml: ROM @ http://get.cm/?device=Z008
Recovery Links
Z00A
Official TWRP: TWRP.ME
Z008
Official TWRP: TWRP.ME
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps. Our resident x86 GAPPS guru @deadman96385 has been working with the opengapps crew to keep these current for us.
Flashable Modem updates:
Currently only supported in jrior001's unofficial TWRP
May or may not work in others
** see this post for more info **
Intel stores some modem firmware in the OTA's in a file labeled "ifwi.zip"
These are flashable zips to receive the updated firmware while staying on custom ROMS
**THIS IS A ONE WAY PROCEDURE, JUST LIKE THE OTA's THERE IS NO KNOWN WAY
TO FLASH BACK TO EARLIER MODEM FIRMWARE, PROCEED WITH CAUTION**
IF you still wish to proceed, current flashable ifwi zips are available HERE for Z00A AND Z008
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
CyanogenMod 13.0 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer
Source Code: https://github.com/CyanogenMod/android_kernel_asus_moorefield
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 2.20.40.16x stock base
Version Information
Status: Nightly
Created 2015-12-05
Last Updated 2016-09-07
Reserved
FAQ
Does Official TWRP work?
* Yep
* Unified recovery builds as of TWRP 3.0.0-0, same build for both Z00A/Z008
Can I use a custom kernel with these builds?
* At your own risk, don't complain here if something gets broken in the process
*Also, doing so makes any feedback useless to us because the kernel and the ROM are a complete package and changing part of that means you may have broken something beyond our control.
Will this be an Official ROM?
* When all the show stopping bugs are fixed and all the upstream commits are merged, yes.
* Until then, no because CyanogenMod has very high standards for accepting new devices.
* As of 3/17/16 we now have official builds
Do I need to unlock the bootloader?
* Yes.
Upgrade from CM-12.1 ?
* Tools have been put in place to make upgrading from 12.1 nightlies smooth however backups are always recommended. Make a backup and attempt upgrade from 12.1 -> 13.0. Make sure to Flash 6.0 gapps at the same time. 6.0 only applies the proper permissions for system apps on first boot.
* If the above fails to load smoothly, restore your backup, take the necessary backups of apps and such and make a clean flash upgrade instead.
EXTERNAL SDCARD in M
* There were major changes in AOSP in the handling of storage.
* Two options :
(1) used as external storage. Removable, plug and play storage like we all know and love.
(2) used as Adoptable storage. non removable, Sdcard becomes an extenstion of your /data partition. Removing Sdcard will cause signifigant data loss.
* On first boot you are presented with the option to choose how to handle your sdcard. CHOOSE WISELY
* read more about this feature in this article from android central
Green lines on Pixelmaster camera/Snapchat
* In the Asus camera app disable "Optimizations", this should clear green lines/distorted pictures here.
* In Snapchat, issue is far less intrusive and there is no workaround.
FM Radio
* Currently this is unsuported. As of yet we have not managed to figure out how Asus made this feature work. Should we figure that out We'd love to support it but until then it is not a high priority issue to resolve. ** UPDATED** I found some source code for the FM radio implementation but it's clearly marked as proprietary and unuseble by us at this time.
Call Recording
Native Call Recording is a feature that while only legal in some countries, has become very popular on CM.
Currently we do not have full audio HAL source for Intel devices and have no way to implement this in CM for this device.
C-APPS
They're are currently no C-APPS packages for CM-13. Due to the way M handles system app permissions this is not likely to be available at any time in CM13.
I'd like to make a donation
Support of this project is a joint effort between @crpalmer and @jrior001. Many users like to show support via Donations. If you feel so inclined to support us in this manner you can do so HERE(jrior001) and HERE(crpalmer). Donations are by no means expected, but always appreciated.
Reserved
Wow.. AWESOMEE.. Thanks Guyzz
Full wipe required when coming from 12.1?
Awesome!!! But... Must.. Resist... The urge.... Aauuggggh.
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
jrior001 said:
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
Click to expand...
Click to collapse
We have resolved the DRM video issue and the audio lag in games has yet to be an issue in cm-13 thus far.
I should be studying for a test, but........CM13 is coming first now
Sent from my ASUS_Z008 using XDA Free mobile app
Fantastic! Just Z00A for now?
Just finished the SAT. Came home to a welcome surprise!
troy5890 said:
I should be studying for a test, but........CM13 is coming first now
Sent from my ASUS_Z008 using XDA Free mobile app
Click to expand...
Click to collapse
550 version doesn't seem to be up yet, unfortunately.
kanagawaben said:
Fantastic! Just Z00A for now?
Click to expand...
Click to collapse
I manually ran a z00a build to test the setup. Assuming all goes well, there will be a z008 build tomorrow.
kanagawaben said:
550 version doesn't seem to be up yet, unfortunately.
Click to expand...
Click to collapse
We weren't going to do the thread till tom but somebody found the test build.... It will come, but probably not till next nightly cycle
Sent from my N5206 using Tapatalk
crpalmer said:
I manually ran a z00a build to test the setup. Assuming all goes well, there will be a z008 build tomorrow.
Click to expand...
Click to collapse
Thank you! No rush at all, of course.
---------- Post added at 11:44 PM ---------- Previous post was at 11:42 PM ----------
jrior001 said:
We weren't going to do the thread till tom but somebody found the test build.... It will come, but probably not till next nightly cycle
Sent from my N5206 using Tapatalk
Click to expand...
Click to collapse
Ditto, my comment above. Absolutely delighted it is coming, and happy to wait a bit longer. Thanks for your sterling work guys!
jrior001 said:
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
Click to expand...
Click to collapse
yeah, i got that sim problem, but choosing manually worked, flashing this rom with open gapps worked fine
Seutp wizard has closed. Keep getting g that message. Back to 12.1.
How install super SU?
Awesome
I formatted my sdcard1 over and over... but my zen can't access it.
Any reason why?
Thread Closed Per OP Request
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.0 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
NOTE :
THIS WORK IS STILL WIP !!!
MOST STUFFS ARE BROKEN , DO NOT ASK FOR ETA !!!
DOWNLOAD ROM
> Click Me
Lineage Source
https://github.com/LineageOS
Device Source
https://github.com/devOreo
Not Working :
Ril
Codecs
Bluetooth
Sensors
Hotspot
Camera, flashlight
Radio
Fingerprint
> others...
Working :
WiFi
Sound
Vibration
Instructions :
Reboot to recovery
Flash the latest build
Reboot
Reporting Bugs :
i know them for now . xD
CREDIT : @darklord4822[4pda] & SRT
Mediatek Android Developers [M.A.D]
@Mysteryagr
Version Information
Status: ALPHA
SCREENSHOTS
Reserved !
Reserved !!
Well, actually big credits deserve to Dark lord.
I hope you had asked for his permission or talked with him?
Because he is the one to make it happen, anyways you haven't linked the source in the OP
Hats off to Dark Lord for this bring up :
https://github.com/darklord4822 without him I don't think it was possible, i don't own the device but just a gratitude to the guy.
https://github.com/darklord4822/android_device_moto_e4
https://github.com/darklord4822/android_kernel_moto_e4
https://github.com/darklord4822/android_vendor_moto_e4
:cyclops:
Before you can boot it, see here :
https://github.com/devOreo/android_device_motorola_woods#note-
Nice
ok
Not that it is a big problem but I have no success with installing the ROM. the recovery indicates that the zip is corrupt. And also the zip looks different from other zip's is there perhaps a different procedure to install this ROM?
Again it is not a big problem since the ROM is still unstable, but it would be nice to try out the ROM.
aadvandersteeg said:
Not that it is a big problem but I have no success with installing the ROM. the recovery indicates that the zip is corrupt. And also the zip looks different from other zip's is there perhaps a different procedure to install this ROM?
Again it is not a big problem since the ROM is still unstable, but it would be nice to try out the ROM.
Click to expand...
Click to collapse
he has two zips in ahf ..i think in one he modified installer script to allow install .. in the telegram group he created we are talking about this rom ..he knows it didn't boot for some but it is a WIP and for working on bugs maybe you can tell us the error in twrp amd join telegram group to try and help test .in the telegram group we are also looking into dual boot patch etc etc in AIM rom he put latest security patches and is a great rom for daily driver .:good:
KevMetal said:
he has two zips in ahf ..i think in one he modified installer script to allow install .. in the telegram group he created we are talking about this rom ..he knows it didn't boot for some but it is a WIP and for working on bugs maybe you can tell us the error in twrp amd join telegram group to try and help test .in the telegram group we are also looking into dual boot patch etc etc in AIM rom he put latest security patches and is a great rom for daily driver .:good:
Click to expand...
Click to collapse
Don't forget to join us on telegram
We have a lot going on and if we chat via one central chat development , bug fixing and general help happens fast .
https://t.me/joinchat/G3XDFEO7AR4fGdyBRfwVOw
http://telegra.ph/woods-development-01-07
Great Rom..
iykeDROID™ said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.0 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
NOTE :
THIS WORK IS STILL WIP !!!
MOST STUFFS ARE BROKEN , DO NOT ASK FOR ETA !!!
DOWNLOAD ROM
> Click Me
Lineage Source
https://github.com/LineageOS
Device Source
https://github.com/devOreo
Not Working :
Ril
Codecs
Bluetooth
Sensors
Hotspot
Camera, flashlight
Radio
Fingerprint
> others...
Working :
WiFi
Sound
Vibration
Instructions :
Reboot to recovery
Flash the latest build
Reboot
Reporting Bugs :
i know them for now . xD
CREDIT : @darklord4822[4pda] & SRT
Mediatek Android Developers [M.A.D]
@Mysteryagr
Version Information
Status: ALPHA
SCREENSHOTS
Click to expand...
Click to collapse
Rom is amazing bro just little bit of bug fixing need to be done...Except it's fabulous
This is big hope! But this actually gonna be a thing or it's abandoned already?
abrahamrhs said:
This is big hope! But this actually gonna be a thing or it's abandoned already?
Click to expand...
Click to collapse
My Moto E4(woods) is dead.
iykeDROID™ said:
My Moto E4(woods) is dead.
Click to expand...
Click to collapse
Should probably as moderator to close/lock thread if development is suspended.
Davey126 said:
Should probably as moderator to close/lock thread if development is suspended.
Click to expand...
Click to collapse
Relax, because we still working under the hood, despite device got broken/dead.
When thread needs to be closed, i will contact the crew responsible for thread/forum moderation.:good:
iykeDROID™ said:
Relax, because we still working under the hood, despite device got broken/dead.
When thread needs to be closed, i will contact the crew responsible for thread/forum moderation.:good:
Click to expand...
Click to collapse
Sorry about that; read too much into your brief post. You are obviously aware of/sensitive to thread hygiene. Good luck with your work.
Davey126 said:
Sorry about that; read too much into your brief post. You are obviously aware of/sensitive to thread hygiene. Good luck with your work.
Click to expand...
Click to collapse
No problem, you can go ahead and do your work as instructed by the XDA Team.
when stuffs are due, a thread/post will be created or made.
Thanks.
Any Progress
Hi @iykeDROID™, are you going to continue with the support of this ROM?
nachoxda79 said:
Hi @iykeDROID™, are you going to continue with the support of this ROM?
Click to expand...
Click to collapse
less time these days.
i can't guarantee a continuous development.
:good:
Link has been broken
The link has been broken everywhere I go it's error 404 please I really need lineage os 15.1