Develop Bugs

Unable to flash twrp recovery on official 4.4.2 and recovery seems to be broken

Hey guys , it seems that my mobile recovery became not alright , I tried to flash twrp recovery to install dn3 v5+ with 4.4 bootloader , so I updated my note 2 to 4.4 via OTA and after I update it I downloaded twrp 2.7.0.2 and flashed it through odin it gave me pass! , that's seem good until this moment I tried to enter the recovery and I was surprised that the recovery wasn't installed and it gaved me no command and tried to reboot gives me error and then it reboots , I tried to reinstall the recovery and it gives me RESET instead of PASS on odin and nothing happens and also in downloading mode it gives me knox void : 1 , so can I do to fix my recovery firstly and then flash the dn3 rom ?

Abdo Taha said:
Hey guys , it seems that my mobile recovery became not alright , I tried to flash twrp recovery to install dn3 v5+ with 4.4 bootloader , so I updated my note 2 to 4.4 via OTA and after I update it I downloaded twrp 2.7.0.2 and flashed it through odin it gave me pass! , that's seem good until this moment I tried to enter the recovery and I was surprised that the recovery wasn't installed and it gaved me no command and tried to reboot gives me error and then it reboots , I tried to reinstall the recovery and it gives me RESET instead of PASS on odin and nothing happens and also in downloading mode it gives me knox void : 1 , so can I do to fix my recovery firstly and then flash the dn3 rom ?
Click to expand...
Click to collapse
First of all you should have used philz recovery version 6.25. or 6.41 if you are flashing the recovery for first time on stock ROM.(TWRP is known to give issues when flashing it over stock recovery).Download the latest philz from this LINK.before doing all this place superSu v1.99 in your external sd card of your phone you'll need it later.Put your phone into download mode.Open odin,connect your phone to odin.wait for the port id to lit up, uncheck AUTOReboot in odin.Next tick mark the AP/PDA option in odin and browse to select the downloaded philz file from above link.Then click start and let odin do it's thing.Once it says "pass" unplug the phone from laptop/pc pull the battery out the phone so it can turn off .wait few seconds put the battery back in then enter recovery mode manually by pressing and holding the volume up+home+power button and let go of all 3 buttons as soon as you see samsung note 2 logo ,wait around 10 seconds or so for philz to load.Then go to install zip select sd card 1 philz will freeze for a moment and then show main menu again, do the same go back to install zip , click on storage sdcard 1(external sd card) find the superSu v1.99 that you downloaded earlier and click on it and press yes on next screen and let it flash.Now use the back button and go back to main menu,go to power then click on reboot system.Now your phone is rooted and superSu will ask to disable Knox press ok/yes and you are done.
SuperSu V1.99

Anyone still have that old Philz recovery?? I'm trying to upgrade my mother in-law's Note 2 to CM13... ugh

Use twrp as cwm and Philz have not been updated for a long time.

[Q] Having problems with the installation of CWM

Hello, everyone. I decided to root my phone and flash a CM 11 ROM but first i had to install a CWM. I tried doing it with Odin 3.07, following every step from here > http://forum.xda-developers.com/showpost.php?p=43717133&postcount=3 and everything goes smooth with no errors but when I reboot and enter recovery mode, it turns out I am still stuck with the Android system recovery and I cant install SuperSU or any ROM in particular. I am currently using the 4.2.2 stock ROM. Can you help me with the solving of this problem? Thanks in advance

maxrate1994 said:
Hello, everyone. I decided to root my phone and flash a CM 11 ROM but first i had to install a CWM. I tried doing it with Odin 3.07, following every step from here > http://forum.xda-developers.com/showpost.php?p=43717133&postcount=3 and everything goes smooth with no errors but when I reboot and enter recovery mode, it turns out I am still stuck with the Android system recovery and I cant install SuperSU or any ROM in particular. I am currently using the 4.2.2 stock ROM. Can you help me with the solving of this problem? Thanks in advance
Click to expand...
Click to collapse
It's simple un-tick auto reboot in ODIN, wait until ODIN shows PASS, then remove& reinsert battery. Now enter recovery mode. (Vol+, Power, Menu combination)

Thank you. The problem is solved now

[Q] Galaxy grand i9082 not booting into recovery mode and factory reset not working

Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin

saivvit said:
Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin
Click to expand...
Click to collapse
Try To Install The Stock Rom Again
And Then Try Again
GOod Luck :highfive::highfive:

saivvit said:
Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin
Click to expand...
Click to collapse
Since you are ready to reset your phone(assuming you have backed up everything), you can try
1.Booting to recovery with phone turned off by the 3 combination keys(lol, read that somewhere off internet) and not just directly.
2.Flashing 4.2.2 again(from sammobile.com) or some other trusted site. And reflashing cwm recovery.
3.Try rooting it ?
4.Try intalling some app like GooManager from playstore to try to enter recovery mode.
May i know which recovery file you flashed? Flashing a more newer/alternative recovery may help.

Did you manage to fix this. Same thing happening to me.. Flashing recovery from Odin does not work.. Factory reset does not work either. Tried to enter recovery mode.. That does not work as well.. In all everything results in normal boot..
Can any one help?

Rahulraz24 said:
Did you manage to fix this. Same thing happening to me.. Flashing recovery from Odin does not work.. Factory reset does not work either. Tried to enter recovery mode.. That does not work as well.. In all everything results in normal boot..
Can any one help?
Click to expand...
Click to collapse
i have observed that u need to do factory reset after flashing a rom.
1. flash stock rom, i would highly recommend using android v4.1.2 because 4.2. of i9082 is little buggy. link to stock rom- http://www.sammobile.com/firmwares/database/GT-I9082/
2. After first boot, do a FACTORY RESET either through settings or using stock 3e recovery, both works
3. flash twrp 2.8.6, via odin, (DO NOT RENAME THE .TAR FILE) link to recovery- https://twrp.me/devices/samsunggalaxygrandduos.html
I have tested this recovery on i9082
if i helped you someway, HIT 'THANKS' button

saivvit said:
Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin
Click to expand...
Click to collapse
Download Odin and PhilZ recovery/kernel for i9082. Flash kernel/recovery via Odin (you must be in download mode, use Volume Down + Home Button + Power Button combo for this) and you should have recovery. After this, you can flash any other recovery/rom if you want.
P.S. Don't forget to do Nandroid Backup.

DroidTwe4kz said:
Download Odin and PhilZ recovery/kernel for i9082. Flash kernel/recovery via Odin (you must be in download mode, use Volume Down + Home Button + Power Button combo for this) and you should have recovery. After this, you can flash any other recovery/rom if you want.
P.S. Don't forget to do Nandroid Backup.
Click to expand...
Click to collapse
Flashing Recovery again with Odin.
Don't tick the 'Auto reboot' and hit start button.
Wait until it shows pass messages.
Disconnect device from PC.
Remove battery and insert after 5 secs.
Press 'Volume Up+Home+Power'.
Thats it!!
Sent from my Sparkle V using XDA Forums

Rizan Mohammed said:
Flashing Recovery again with Odin.
Don't tick the 'Auto reboot' and hit start button.
Wait until it shows pass messages.
Disconnect device from PC.
Remove battery and insert after 5 secs.
Press 'Volume Up+Home+Power'.
Thats it!!
Sent from my Sparkle V using XDA Forums
Click to expand...
Click to collapse
I thought OP knew how to flash via Odin. Thanks for tutorial

[HELP]Accidently flashed wrong CWM and now stuck on boot screen with no recovery mode

I have accidently flashed wrong CWM and now its stucked on boot screen (just showing SAMSUNG GALAXY GRAND DUOS). Even i tried to open the recovery mode but nothing happened, it just keep showing the same screen. Is there any way to flash the correct cwm via PC. Guys pls help
Device is already rooted with aicp rom installed.

Flash new recovery via odin, detailed guide below
http://www.ibtimes.co.uk/galaxy-grand-duos-i9082-root-android422-clockworkmod-499739

GSR1992 said:
I have accidently flashed wrong CWM and now its stucked on boot screen (just showing SAMSUNG GALAXY GRAND DUOS). Even i tried to open the recovery mode but nothing happened, it just keep showing the same screen. Is there any way to flash the correct cwm via PC. Guys pls help
Device is already rooted with aicp rom installed.
Click to expand...
Click to collapse
bro are stuck on boot logo (Samsung galaxy grand duos) if not booting in normal time ? if so (I had faced the same problem when flashed s duos's cwm via flashify ) you need to download official jelly bean 4.2.2 firmware from sammobiles.com or somewhere then flash it via Odin (by entering into download mode) hope it works

[Tab Pro 10.1 SM-T520] Unresponsive trying to flash lineage OS

Hi all, I am new to the forum so bear with me!
I recently rooted my Tab Pro 10.1 as it was becoming unusably slow, and I wanted to lighten it a little. Root was successful, and I downloaded lineage OS from the dev forum to flash onto my device using TWRP manager. However, after trying this my device now boots to the Samsung model number page (first screen), then goes blank. If I hold down the power button it powers off, but restarts and does the exact same thing. I hope I haven't done irreparable damage, seeing as it can still seemingly start and I can also boot into download mode (not bricked).
My question basically is, is there a way to "undo" my failed flash attempt and return my device to a "normal" rooted device using odin, seeing I can access download mode?
Many thanks in advance!
Craig

Use twrp 3.0.0.0 afterwards flashing the rom,flash gapps
If u wanna go back to stock,just flash the stock ROM (download from sammobile) via odin
von meinem SM-T520 mit Tapatalk

ChilliBo said:
Use twrp 3.0.0.0 afterwards flashing the rom,flash gapps
If u wanna go back to stock,just flash the stock ROM (download from sammobile) via odin
Click to expand...
Click to collapse
Thanks for your response.
The problem is I can't boot the device past the model startup screen to begin using TWRP and flashing, as the screen black and unresponsive (I can get into download mode). Do you suspect if I flash the stock ROM using Odin I will get back to where I started?

If you wanna go for lineage os, go to download mode and flash twrp 3.0.0.0 with odin, reboot to recovery and wipe system, cache,dalvik. Now flash ROM and gapps.
Back to stock? Just flash stock ROM via odin after first boot go to recovery and do a factory reset
Gesendet von meinem SM-T520 mit Tapatalk

hello
press vol+ pwr home buttons together u are in dowload mode
use autoroot with odin (all necessary files are there)
3.xxxx does't work correctly with t520
regards

Thanks all for your help - I have eventually got sorted in the end.
I was able to flash TWRP 3.0.0.0 onto my device with Odin, then booted into recovery mode (PWR + Vol up), wipe everything (except internal memory) and flash the most up to date lineage file I had downloaded prior to the process. Device working well now, just downloaded and flashed the relevant GAPPs and all in working order.