Related
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Download Android SDK Tools from here and install the packages.
4) Plug your Ascend P1 to the PC.
5) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
6) Open "b113_b115-root_u9200---__[Nixing]" from your desktop.
7) Run "hwadb.exe".
8) Run "ubl.exe", click ROOT - this should root your device without restart and any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Recovery
lerso said:
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Click to expand...
Click to collapse
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
I am curious how you install some ROM as .zip file, when all original updates from Huawei have .app as extension.....
Nixing said:
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Plug your Ascend P1 to the PC.
4) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
5) Run "hwadb.exe".
6) Run "ubl.exe" - this should root your device without any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Click to expand...
Click to collapse
In my case it after step 5) it works a little bit different.
When run "Onekey_ROM_Ascendp1.exe" and stuck on reboot stage (just show Huawei Ascend), then you must install a driver for Blaze device manually, you can choose the standard "Android Adapter ADB interface" for this (it works in my case), after intalling the driver Onekey_ROM will resume and install only the recovery image and you phone is showing the Chinese recovery menu choose your "update.zip" or "gapps-signed.zip" from SD-card and it wil be installed (update.zip means your desired firmware).
It seems that the firmware in the Onekey_ROM_Ascendp1 tool will not be placed on the SD-card but in Local Storage, so it will not be installed, therefor put the "gapps-signed.zip" or "update.zip" before flashing on the SD-card so you can select it in Chinese recovery.
I only installed the gapps with original firmware B115 on the phone and all gapps are working.
GRTZ DiMaC
Hi people,
I'm sorry for this little off topic but I don't know where to find other Huawei Ascend P1's users.
I would like to buy this device but before I would like to know if this device is going fine.
In particular way: how is the in call audio quality? Is it missing calls (like other Huawei device U8800 Pro)? How is the Network (GSM and/or UMTS-3G) quality?
Is the price balanced to the overall quality of the device? I just know that the Huawei Ascend P1 is able to record amazing video and the audio quality is really incredible, but the "phone" function, how is it?
Sorry for the off topic.
It's a great news that I can root the device, so probably at 99% I will buy it after reading your comments.
Thank you in advance,
regards,
kalo
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Nixing said:
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Click to expand...
Click to collapse
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Build B218
Hi,
i have the Build B218.
Has anyone rooting?
B218
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Try Unlock Root here - Unlock Root 2.3.1 it says it can root the U9200 and might work for your firmware version.
You can also try the method for B113 and B115
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - Johnny Paranoia's Other Blog
or here
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - MadModder
See if it works and post back to let everyone know
ljmchinastar said:
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Click to expand...
Click to collapse
The links to my sites above have links to the tools and the link to OneKey's rom is also there on the - How to Install Root and Recovery on Huawei U9200 - Ascend P1 post
I didn't mirror nixings full download without his permission, though I will if he would like me to (Although I would have to remove the password because I don't like them lol)
Hope this helps
The main link for "b113_b115-root_u9200---__[Nixing]" works as well now, thanks for all your PMs!
Download Mode
Hey,
is there any trick to get into Download Mode/Fastboot?
Should I press both at the same time? When do I release them..
With Vol. Down + Power Key i don't get into Download Mode..
I just managed to get there once, but I don't remenber how I did it.
And by the way. When I press Vol.Up und Power, I get to the android recovery, stock. where I can do a wipe or apply a update from sdcard.
Pease let me known
jensema
EDIT:
Got it. Hold VOL. Down and then Plug in USB Cable.
Phone in Download Mode.
Now I need the right drivers.
Phone shows a "Blaze"
Can someone tell me which driver to use.
thanks
2.EDIT: Got it. Under Win7 , installing Hi Suite, then change Driver for "Blaze" to Android ADB Interface.
Fastboot working!
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
b113_b115-root_u9200---__[Nixing] mirror
Nixing has given me permission to mirror his download so here it is - b113_b115-root_u9200--__[Nixing] mirror
jensema said:
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
Click to expand...
Click to collapse
Hi jensema,
root and recovery works with B218 !:good:
http://www.mediafire.com/?7pdfh11ue8ykyk6
http://madmodder.co.uk/huawei/u9200/how-to-root-huawei-ascend-p1-u9200.htm
http://www.android-hilfe.de/huawei-ascend-p1-p1-s-forum/275267-root-recovery.html
Arcelor
Has anyone updated with cwm-recovery on B219?
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDY0NjU=
WIND Mobile Huawei Ascend P1 (U9200)
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
JohnnyParanoia said:
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
Click to expand...
Click to collapse
I want to install the new version B118
I can not update with the alternate recovery
How can I get back to the original recovery.img?
Safe to update Superuser?
I have also successfully rooted my Wind Mobile, build U9200-1V100R001CANC113B104. Just wondering if it's safe to update Superuser (update available through system updates).
djstyles97 said:
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
Click to expand...
Click to collapse
Did not work on my Wind pentaband P1, the firmware version on mine is B105.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!!!! UPDATE !!!
also working for
P6 Stony Quad
[Devices: Allview P6 (Stony), Allview P6 Quad (new) /A]
This thread will discuss the following topics:
1- How to backup and restore your user data [ready]
2 -A a guide How to root the Allview P6 [ready]
3- how to make a full system backup and restore of a rooted phone
4- how to run programs that recognized that your device is rooted
5- how to disable or delelete system applications
6- how to use an alternative launcher
7- how to use an alternative phone dialer
8- how to completely restore factory settings using a stock image from Allview
9- ADB
10- setup dual sim
11 - reset from frozen state
12- factory mode (hold the volme down button and the powerbutton)
[UNDER CONSTRUCTION]
update --20-1-2013
Please be patient. I don't have much time to spend building this thread but I WILL write down all the promised points. starting by 1
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1- How to backup and restore your user data
(if applicable unlock klick once on the power button to get it from standby and unlock the screen by swiping the middel circle.)
- press and hold the powerbutton on the left side of the phone
untill a screen appear that let's you choose to power off te phone.
- you will know the phone is truly turned off when you hear or feel a final short vibration
- now, press and hold the volume UP button on the right side off the phone and at the same time press and hold the powerbutton.
- Wait until a logo from Allview appears. at that time you can let go.
The following recovery screen will appear:
use the volumeUP and volumeDOWN keys on the right side of the phone to choose "backup userdata"
once selected press the powerbutton on the lef side of the phone.
a screen will appear and a green bar will show the progress. please be patient, this can take a while
after the backup has completed you will return to the recovery screen. you can then use the volumeUP and volumeDOWN on the right side of the phone to scroll to "reboot phone" and you will return to normal modus. that's it. your done. You now have a backup of your userdata. it will be placed in the root of the SDCARD that is in your phone.
You can use the same procedure to restore it.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2-A a guide How to root the Allview P6
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1- Use the following Guide by Bin4ry
----------------------------------------------------------
Bin4ry THANK YOU for that post
---------------------------------------------------------
!!!!ATTENTION!!!
rooting will NOT work if:
- you do not have USB debugging enabled
- do not have allow installation from fake places enabled
- have downloaded a superuser app
I will show the spefiic steps and results for the Allview P6
- download the zip file needed at the top of the post
- extract the zip file
- now, make sure your phone is in USB debugging mode
- goto settings, developer settings and enable usb debugging
- now connect the phone with a usb cable to the computer
- now, goto the unzipped file and double-click "runme.bat"
- make sure your phone is on, and unlocked (screensaver lock)
- choose 1 for a normal procedure
if everything went well the following screen will appear:
- a screen will apear on your phone
- dot NOT enter any password
- choose restore my data
- after a while a message will appear quickly and dissappear as quickly saying "restoration finished". the screen will close.
- the phone looks in normal mode
- now wait for the phone to restart (it will!)
- after it restarts, before it comes into normal mode it will say briefly "upgrading android"
- once the phone is restarted you will see and extra icon "super user"
- if you now download a program requering root accesss a box will appear letting you choose to allow the program root acccess. once or always or to deny.
Allview p6 stony
Thx for the trick.
This phone is a good one but can be even better if we can get some cooked 4.1 or 4.2 roms.:good:
allview p6
Thanks for this thread.Very useful instructions .looking forward to your upcoming posts.good job. thanks
Just wanted to say thanks for helping me root my P6.
It worked just as you described.
Only had one issue. My windows 8 system did not have the ADB drivers installed for the script.
I googled that and after I got the drivers it worked fine.
Looking forward to any updates on this post.
can u please continue this thread ??
Is there any chance this phone will ever get an update to Android 4.1?
alguem sabe onde consigo a rom desse aparelho, ziquei o meu e agora ele nao funciona a rede. como farei agora?
Anyone know where I can get the rom this handset, ziquei mine and now it does not work the network. how do now?
update tot 4.1 for P6 Stony
dutchguy said:
Is there any chance this phone will ever get an update to Android 4.1?
Click to expand...
Click to collapse
right now, there is an official update from Allview op there site allview.nl/toestellen/allview-p6-stony/update/
no Jelly Bean yet, sorry.
continue thread
ZecaR said:
can u please continue this thread ??
Click to expand...
Click to collapse
I'm sorry you are quite right. I WILL do so. please be patient.
great that works with Allview P6
Allview P5 Qmax
Hi, anyone knows how to do root at Allview p5 Qmax? Thanks.
Hi all,
I have the Allview P6 stony myself. What I miss on this phone is the option to associate contacts to a SIM. I've been searching all over to find a solution for it. So far without luck. Thats too bad, because the quad version of the phone has this option integrated. I want to share my findings here, hoping anybody else can benefit from what I found so far.
This phone is sold all over the world with different names. The dual core version is know as:
Allview P6 Stony (Romania and the Netherlands)
Fly IQ 444 (Russian)
Blu Vivo 4.65 (american, has two versions based and band)
NGM We Move Legend XL (Italian)
There is also a Quad core version with jelly bean and the associate contact to SIM function ...
Gionee Dream D1 (Chinese)
Allview P6 Quad (Romania and the Netherlands)
Walton Primo X1 (Indian)
Nice detail: The Italian version has the function I need (associate contact to SIM, but I can't find it's ROM anywhere and their support department wouldn't give it to me)
As a new user I am not allowed to post links to the firmware I found so far but... :angel:
For the Fly IQ444 there is official and rooted firmware on 4pda.ru
with extension /forum/index.php?showtopic=415423
For the Allview P6 the firmware is on ther website allviewmobile dot com with extension com/fileadmin/p6_update/Allview_Update_P6_17012013.zip
For the Walton prima the firmware and update software is on some unknown site hellomobilecms.blogspot dot nl
with extension nl/2013/05/walton-android-primo-series-phone.html (google how to use...)
Now that I did my part in sharing.. I still have these questions.
Can I flash my dual core version of this phone with the quad core version firmware, or will that "brick"it?
Can anybody get his or her hands on the Italian firmware ?
Is there any other option to get this "associate contact to SIM" function working?
EDIT: The app "SIM selector" from th eplay store adds associate contact (number) to SIM functionality
How to add CWM recovery for Allview P6
Hi All,
I am still new to this, so perform at your own risk :laugh:
Here is my How to add CWM recovery to your Allview P6.
First I need to say some thanks
OP here on XDA for telling how to root the Allview P6
Hohol on 4PDA.ru He posted the CWM for the Fly IQ444, I only edited his work so it was compatible with the original Allview P6 update
michfood here on XDA for explaining how to edit a recovery image and provide the tools to make it easy.
Ok so I said my thanks, here we go (on your own risk)
Root your Allview P6 (but since you are reading this in as a reply to OP's post I guess you allready did that
Download and install Mobileuncle tools from the play store. Watch out here, this tool can make you flash the wrong boot image!! so follow my instructions carefully
Download the recovery image for Allview P6 I created based on Hohol's recovery for Fly IQ444. (attached to this post)
Put the recovery image on your SD card (not in a sub folder, directly in the SD card root)
Start mobile uncletools en go to Recovery Update
Select the recoveryalvw.img file en go ahead, flash it :silly:
The file should be the first option available, if not it's probably on the wrong location
Now if you reboot in recovery you will have CWM available for backups and flashing of ROMS (And yeah, only Roms I found I allready posted above)
With this option I wass able to
Backup my Allview P6 Rom and Data
Flash Hohol's IQ444 CWM rom on my Allview
Restore the original Allview P6 update from Allview's website
Final note: I don't have the original Allview P6 recovery image, so once this is done, you can't go back. But that only matters for your warrenty and you allready broke that by rooting your phone Actually restoring the Allview original update did also restore my recovery image to it's original AND it unrooted my phone. Nice for warranty...:angel: less nice for me here I go unrooting again :silly:
Extra final note: Now I only need the NGM We Move Legend XL rom so I can flash that on my Allview... anybody?
It works
I have solved the problem and now have CWM on my p6 quad
spit85 said:
I have solved the problem and now have CWM on my p6 quad
Click to expand...
Click to collapse
So how did you solve it?
Do you want a other recovery on your phone, a other then the stock firmware.
You can use CWM or TWRP (TWRP is a full touch recovery)
Expand your internal memory from the phone to 2.5 GB
How to flash the recovery
You can use Mobileuncle MTK Tools, to download by Google Play Store
- Rename the downloaded recovery image to recovery and place it on the root from you sdcard-
- Start MobileUncle Tools (your phone must be rooted).
- Go to the tab recovery update.
- Now you will see the recovery.img file, chose it.
- It will prompt if you want to flash it, and after it will ask to reboot in recovery.
- now you have the flashed recovery on your phone
The other way is to flash it with SP Flash Tool (to download in the attachment files below " SP Flash Tool v3.1328.0.183.zip")
Download the attachment and unpack it.
- Open the program to double click on Flash_tool.exe
- Open the scatter file for you phone (the scatter file for the Allview p6 Quad is in the folder Allview; named "MT6589_Android_scatter_emmc_PMT"). If don't have a scatter file, create one for you phone.
- now double click on "recovery" and select the downloaded recovery image.
- be sure you only selected the recovery check box, not the other check boxes.
- select download, but not "firmware->upgrade", because you will brick you phone. So only choose "download"
- now power down you phone and wait until it is fully shutdown, then connect your phone to your computer with the usb cable.
Note that you have first to install the adb drivers and the USB VCOM drivers, other wise you cant use SP Flash Tool.
You can download the drivers also in the attachment files ("SP_Flash_Tool_drivers.zip"), and i assume that you know how to install a driver on your computer.
The best way to install the drivers for your phone is the shutdown the phone and press the volume down button, hold it, and press the power button, until the phone go's on. You will see a screen with factory settings, ore something like that, but that doesn't matter. If you now connect your phone two your computer it will find to new devices. Use the drivers in the attachment file to install the drivers on your computer.
Do it on your one risk! I'm not responsible for any brick!
How to root the Allview P6 Quad
- Download the attachment "motochopper.zip" and unpack it.
- Enable usb debug mode on your phone and connect your phone to the computer.
- Click on "Run" in the unzipped folder and follow the instructions, and after that your phone is rooted.
If your phone reboots, you will see the superuser app from clockworkmod. Don't uninstall it and install a other superuser APK, because a other superuser app doesn't work, only the clockworkmod superuser app.
Another way is to use UnlockRoot. Download it here and chose the free version.
- First root your phone with motochopper, before you use UnlockRoot, otherwise it doesn't work.
- Install and open UnlockRoot.
- Connect your phone to your computer (with USB debug on).
- Click on "Root" and wait a moment, until there is a popup where you can choose your phone; choose it.
- UnlockRoot will say that your phone is already rooted, and if you want to root it again. Choose yes.
- After it is rooted you will be ask to install some other app, but you can refuse it, then your phone will reboot.
- After the phone is rebooted, open UnlockRoot again and click on "Unroot".
- Wait until your phone is unrooted.
- Uninstall the superuser app from clockworkmod
- Install SuperSu from Chainfire, download it in google play, here
- After your phone is unrooted and you installed SuperSu, open UnlockRoot again and choose "Root", and again there will be a popup where you can choose your phone; choose it.
- Follow the instructions, and after your phone reboots, your phone is rooted correctly, and you can also choose other superuser apps, but first uninstall always the old superuser app if you want to install another.
I have no idea why it must go this way, but that was the only way for me to root my phone right, so i can install SuperSu.
Edit: new CWM V6.0.3.2
I ported a newer CWM version from HBB (V6.0.3.2) to the Allview p6 quad, with some more futures in it:
- dual sdcard mounting
- install zip from sideload (ADB)
- partition sdcard and partition internal sdcard
If you want to give it a try, download attachment "CWM_V6.0.3.2_allview_p6_quad.img" and flash it to your phone.
Do it on your one risk! I'm not responsible for any brick!
Edit: TWRP V2.4.4.0 for p6 stony and p6 quad
I have ported TWRP V.2.4.4.0 (Team Win Recovery Project), for both models, the p6 quad and the p6 stony. But i haven't tested it for the p6 stony, because i only have a p6 quad. But Salvolin confirmed it works on his P6 Stony.
I'm also try to port TWRP V.2.5.0.0, but the recovery gets to big to flash, so i try to solve that to get a other layout with pictures in it that have not so much kb. At the moment SP Flash Tool cant make the recovery bigger if i edit the scatter file, then there is a strange error, so i have to wait of e newer version from SP Flash Tools. But for me TWRP is a good recovery, because its full touch.
You cant restore CWM backups with TWRP, or TWRP backups with CWM
The only way to convert your CWM recovery to a TWRP is:
- Flash CWM and restore the backup.
- Flash TWRP and backup
- Flash CWM and restore another backup
- Flash TWRP and backup.
If you have 10 backups from CWM, and you want them all converted to TWRP, you must flash a few times between the recovery's.
For the P6 Quad, download attachment "twrp_2.4.4.0.img"
For the P6 Stony, download attachment "TWRP_v2.4.4.0_Allview_p6_stony.img"
Do it on your one risk! I'm not responsible for any brick!
How to expand the internal Storage to 2.5 Gb for the Allview P6 Quad.
This patch is only for the Allview P6 Quad, not the Stony.
First you make a backup from your phone with CWM or TWRP.
Download the attachments 'Allview_P6_Quad_2.5GB_internal.zip' and unzip it. Load the scatter file in Sp Flashtool. If everything is correct, you only see EBR1 and EBR2 selected.
Then hit the Download button, not the firmware upgrade button! If you download it to the phone, go into the recovery and do a factory reset.
Now you can place your backup back and reboot your phone. Now you have a 2.5 GB internal partition, instead a 1 GB partition.
The internal SD is now 300 MB.
:laugh:
Is there a way to flash a stock Android rom on this phone?
forza11 said:
Is there a way to flash a stock Android rom on this phone?
Click to expand...
Click to collapse
I flashed between the Fly IQ444 rom and the allview P6 one
But now I bricked it with a THW 5 or something rom :crying:
I have an International version of ascend p6 -06 with B107.
I was trying to install kitkat into it.Its rooted.
I downloaded the UPDATE.APP from one of the forums.I installed twrp and I thought I can use to flash the new ROM using it,but I couldnt find the option,I read somewhere only the zip files can be installed through TWRP. Whenever I press the volume+ + volume- + power button,the phone starts with the TWRP directly than doing any update .I have put the UPDATE.APP file in dload folder in my SD card,still it was not updating with that given shortcut.
I did a stupid thing just now,I wiped all datas using TWRP and now i have no OS installed ,and like that my phone is bricked.now if i switch on the phone it gets stuck at huawei ascend Logo.and if i press volume up and down buttons along with power button,then it goes to TWRP ..
pls pls pls help me ,and thanks a ton in advance.
I even tried downloading the the original rom from the huawei website and still not able to update using that UPDATE.APP file...
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
can u help me with starting adb.
blueIBI said:
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
Click to expand...
Click to collapse
I am sorry to trouble..I am not a PRO in all these like u guys.
how do i start a ADB?? and where to download the stock recovery image?
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
nope
blueIBI said:
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
Click to expand...
Click to collapse
no. I used a huawei P6 toolkit.
OK...then there should be the Option to install/flash a stock recovery..
here comes the next problem
I downloaded the abd driver installer 1.0,it identifies my phone.but once i press the button for installing the error pops up.,incompatible with win 8 (64 bit.)now what to do??
yes but
blueIBI said:
OK...then there should be the Option to install/flash a stock recovery..
Click to expand...
Click to collapse
The option of installing stock recovery is there,but now when i can connecting the phone its not recognising.it shows phone not connected.
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
ok let me
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I will try to find it and will update you
Thank youuuuuuuuuuu
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I have no words to thank you..finally its done..the adb drivers were not installed well,thats why it was not picked up by the tool.I updated the stock recovery image and it rebooted and installed well...thanks a ton again..and I appreciate your fast replies.I had spend 2 days only in this.its such a releif.:victory::victory:
you are welcome
Again problem
blueIBI said:
you are welcome
Click to expand...
Click to collapse
I am sorry to trouble you again.yesterday i updater to B508 kitkat,but gprs or 3g were not working.so today I downloaded the B512 version.in this version if iam putting the dload file in SD card,it doesnt read it.I have to put this in internal storage itself.This time my phone is stuck in the normal android recovery stage as I dont have TWRP installed (I guess,the same shorcut is not starting TWRP).
And to update to the older version the update.app file should be there in internal storage which i cannot assess at this point since mobile doesnt start..what do I do??
I tried installing TWRP connecting mobile in the present status,but its not installing
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
again got lucky
blueIBI said:
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
Click to expand...
Click to collapse
It worked.I fomatted the sd card and left only dload folder .and used the same version which was originally working (508).now its reverted back to normal ..half my tensions are over.but the i wanna change from this rom,in this my internet doesnt work..I wanted to install B510,but for that I have to install B132 first,which i am trying.but its not working.Any idea what should be done.?
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
blueIBI said:
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
Click to expand...
Click to collapse
You meant I shoould make a recovery for B132 using huawei update extractor.I have the P6 tool with me,if i update a recovery image for jellybean (currently its kitkat) will that be enough??
yes will be enough..
bigger problem
blueIBI said:
yes will be enough..
Click to expand...
Click to collapse
I made B132.zip file and using TWRP i installed it.It showed the istallation was successful,and i rebooted to the system and its stuck in huawei ascend logo and its not moving from there.I tried again using the vol- + vol+ + powerbotton,Its restarting to the sa,me logo.somehow recovery is not working.I think now I am really screwed.
you should not make a ZIP file..
now you are at then beginning again..
HwOTA7 + HwOTA8 for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware (only HwOTA8)!!!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA_WARSAW.zip
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Locked Bootloader
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
vovan1982 said:
HwOTA for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
Click to expand...
Click to collapse
Yes, I can understand you. You did the right thing, way to HwOTA as short as possible.
vovan1982 said:
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
Click to expand...
Click to collapse
so need to wait for twrp port... ok ^^
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
Click to expand...
Click to collapse
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
The greater question is: can be the bootloader locked after Oreo update ?
Eurofighter_ty said:
The greater question is: can be the bootloader locked after Oreo update ?
Click to expand...
Click to collapse
Don't know, I'm not going to try
My Bootloader is Unlocked after successful installation.
But why my PC says the prone is PRA-LX1 instead of WAS-LX1?
GizmoTheGreen said:
Don't know, I'm not going to try
Click to expand...
Click to collapse
Did u relocked bootloader?
Alexxxx1 said:
Did u relocked bootloader?
Click to expand...
Click to collapse
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
GizmoTheGreen said:
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
Click to expand...
Click to collapse
Yes, with this method bootloader stay unlock same as on p10 plus, but if you can enter in stock recovery no afraid of any brick if you relock bootloader.
Poslato sa VKY-L29 uz pomoć Tapatoka
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
GizmoTheGreen said:
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
Click to expand...
Click to collapse
Did you try it? Someone said he wasn't able to do it.
Jaizu said:
Did you try it? Someone said he wasn't able to do it.
Click to expand...
Click to collapse
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
So, what's the first impressions of Emui 8?
Sent from my WAS-LX1 using Tapatalk
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
Mind sharing patched .img files? What device model are you using?
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
Got a link?
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
If you mean that: http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img (TWRP-3.2.1-0 for Huawei P Smart)
I've not test yet if it's fully comatible, but you can enter into TWRP and seems to works.
Reboot into fastboot and enter the command:
fastboot flash recovery_ramdisk FIGO321.img
recovery_ramdisk partition in Android 8 is the Recovery
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.