Develop Bugs

[HOWTO] Port N7100 ROMs to I317 and N7105

I spent the entire day yesterday trying to make Android Revolution HD work on my I317. At the end of the day, success ! and here is how:
Please do not experiment with this stuff if you're not familiar with partitions and the way things work. You do run the risk of bricking your device permanently if you don't know what you're doing. I'll write this so that developers can start porting their ROMs to the LTE variants.
The two devices are identical except for the modem (and rild files) and the GPS initialization at bootup.
1. You'll need to rewrite the updater-script in most CWM flashable ROMs to make sure.. again, MAKE SURE that you do not flash anything else except /system /data and the boot partition. Overwriting your modem partition with a modem from the N7100 phone or the bootloader partitions will blow up your phone. You've been warned ! The partition labels and numbers are identical so you won't have to change that.
2. Make sure you bundle a kernel (boot.img) from one of I317/N7105 (depending on which device you own). Obviously we're talking about TW kernels here so for example stock JB kernels or Perseus will do just fine. Do not flash boot.img kernels from the N7100 section.
3. You'll need to add and remove a bunch of userland library files from your device. I won't attach these files here but you can grab them from any I317/N7105 ROM:
Files to ADD/REPLACE (Yes, every single one counts as they're dynamically linked). The stuff in /system/bin are started by the initramfs in the kernel so add them all in as well:
Code:
./system
./system/bin
./system/bin/qcks
./system/bin/sec-ril
./system/bin/qmuxd
./system/bin/efsks
./system/bin/diag_uart_log
./system/bin/netmgrd
./system/bin/gsiff_daemon
./system/bin/ks
./system/bin/rild
./system/bin/qmiproxy
./system/bin/secstarter
./system/etc
./system/etc/gps.conf
./system/lib
./system/lib/hw
./system/lib/hw/audio.primary.smdk4x12.so
./system/lib/hw/gps.default.so
./system/lib/hw/audio_policy.smdk4x12.so
./system/lib/libril-qc-qmi-1.so
./system/lib/libnetmgr.so
./system/lib/libaudio-ril.so
./system/lib/libloc_api_v02.so
./system/lib/libril-qcril-hook-oem.so
./system/lib/libqdp.so
./system/lib/libdsutils.so
./system/lib/libqmiservices.so
./system/lib/libqmi_client_qmux.so
./system/lib/libloc_adapter.so
./system/lib/libqmi_common_so.so
./system/lib/libqdi.so
./system/lib/libqmi.so
./system/lib/libcsd-client.so
./system/lib/libloc_eng.so
./system/lib/libqmi_encdec.so
./system/lib/libqcci_legacy.so
./system/lib/libqmi_cci.so
./system/lib/libssaudio-client.so
./system/lib/libidl.so
./system/lib/libril.so
./system/lib/libqmi_csi.so
./system/lib/libdiag.so
./system/lib/libdsi_netctrl.so
./system/lib/libgps.utils.so
./system/lib/libgps.so
To remove !!! Moi importante !
Code:
./system/lib/hw/gps.exynos4.so
If you don't remove that GPS exynos4 file, HAL will load it and never the gps.default.so file so your gps won't work. Took me three friggin hours to figure out.
4. Lastly, you'll need to change build.prop so that it loads our RILD files instead of the N7100's:
Code:
replace
rild.libpath=/system/lib/libsec-ril.so
with
rild.libpath=/system/lib/libril-qc-qmi-1.so
5. ???
6. Profit.
When I get sometime, I'll try to port CM10 from the N7100 tree. Done.

im going to try this I hope it works thanks

drakeymcmb said:
im going to try this I hope it works thanks
Click to expand...
Click to collapse
well, attached is what I'm seeing on my phone now

does signal and lte work ?
---------- Post added at 03:49 PM ---------- Previous post was at 03:46 PM ----------
can u please upload the ported android revolution thanks

this is good news to alot of 7105 users
thank u. from the bottom of my heart heh!

drakeymcmb said:
does signal and lte work ?
---------- Post added at 03:49 PM ---------- Previous post was at 03:46 PM ----------
can u please upload the ported android revolution thanks
Click to expand...
Click to collapse
LTE works. Si senior. Shows as proper "4G" on top.
I'm not going to upload it because I'm too lazy to ask for his permission. silly i know

il ask for u and then u can upload it but does calling work like can u call your voicemail ? and thanks so much me gusta lol

Thanks for this...are you looking at porting over imilka's CM10 build?
my day just got better

dammit.. phone call goes through but I can't hear anything!!
Lemme see if I can fix that.

madmack said:
dammit.. phone call goes through but I can't hear anything!!
Lemme see if I can fix that.
Click to expand...
Click to collapse
This is truly a breakthrough if you can get everything to work!!! Am really excited.

MonsterBandit said:
Thanks for this...are you looking at porting over imilka's CM10 build?
my day just got better
Click to expand...
Click to collapse
I don't think that will be possible until we have an cm10 kernel built for our device first, can't switch in a TW kernel for their cm10 kernel without possibly bricking our phones
And to the OP of this thread:
Great work man, I know they were having a little trouble getting the roms to port on our IRC channel, hopefully this opens the flood gates for more rom possibilities :good:

MonsterBandit said:
Thanks for this...are you looking at porting over imilka's CM10 build?
my day just got better
Click to expand...
Click to collapse
mjwhirly said:
I don't think that will be possible until we have an cm10 kernel built for our device first, can't switch in a TW kernel for their cm10 kernel without possibly bricking our phones
And to the OP of this thread:
Great work man, I know they were having a little trouble getting the roms to port on our IRC channel, hopefully this opens the flood gates for more rom possibilities :good:
Click to expand...
Click to collapse
I'm going to port the standard CM10 that is available at github.com/cyanogenmod Once this is completed, then we can incorporate that to all AOSP based roms.
The kernels are actually pretty close to each other. (have a look at the defconf for details). What's different is the initramfs and the userland binaries/libraries. I'll have a look at it but I need to get this audio going on TW roms first.

mjwhirly said:
I don't think that will be possible until we have an cm10 kernel built for our device first, can't switch in a TW kernel for their cm10 kernel without possibly bricking our phones
And to the OP of this thread:
Great work man, I know they were having a little trouble getting the roms to port on our IRC channel, hopefully this opens the flood gates for more rom possibilities :good:
Click to expand...
Click to collapse
Thats, what I thought, but he said he was gunna try CM10...I've been trying to learn more about Kernels all morning, and I understand we have a Qualcomm modem, but idk what would be needed to build a kernel for say CM...any thoughts?
Sorry for the OT OP.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
madmack said:
I'm going to port the standard CM10 that is available at github.com/cyanogenmod Once this is completed, then we can incorporate that to all AOSP based roms.
The kernels are actually pretty close to each others. (have a look at the defconf for details). What's different is the initramfs and the userland binaries/libraries. I'll have a look at it but I need to get this audio going on TW roms first.
Click to expand...
Click to collapse
awesome...I'm very new to the development world, and I'm learning as much as I can to be able to help and maybe dev my own stuff

Audio phone calls work
PHONE CALLS..
FIXED
HOW U LIKE DEM APPLES amigos
lemme update the OP.
edit: done. OP's list of files to add/replace is updated to reflect this change. basically a bunch of libaudio* files and their dependencies.

madmack said:
PHONE CALLS..
FIXED
HOW U LIKE DEM APPLES amigos
lemme update the OP.
edit: done. OP's list of files to add/replace is updated to reflect this change. basically a bunch of libaudio* files and their dependencies.
Click to expand...
Click to collapse
Damn man you work too quickly, at this rate we should have CM10 in like 2 hours

mjwhirly said:
Damn man you work too quickly, at this rate we should have CM10 in like 2 hours
Click to expand...
Click to collapse
lol. it'll be a while til we get CM10 running. I've just quickly looked at the differences and have an idea where to go from here but that's about it.
It all depends on how much free time I get here at work.

Madmack, you sir are a freaking genius. Now I'm glad I didn't get the international version cause I have lte in my area. Can't wait for more ported roms and aosp goodness. Thank you sir!
Sent from my SAMSUNG-SGH-I317 using xda premium

./system/bin/secstarter
I can't find it in N7105 LJ4 Rom

deadman12 said:
./system/bin/secstarter
I can't find it in N7105 LJ4 Rom
Click to expand...
Click to collapse
I actually pulled it from a N7105 LJ4 Rom. Download the stock LJ4 ROM, it should include it. If not, well, then don't add it and see what happens.

madmack said:
lol. it'll be a while til we get CM10 running. I've just quickly looked at the differences and have an idea where to go from here but that's about it.
It all depends on how much free time I get here at work.
Click to expand...
Click to collapse
I'll gladly set up a Google Code Page for you...I'll do the same thing I did for randomblame and his original Jellytime Project...link to that project page is in my sig.

[Q&A] [ROM] Vanir/Commotio N1

Q&A for [ROM] Vanir/Commotio N1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Vanir/Commotio N1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

DHO said:
Wow I never got a notification on this sorry. I will look into this.
Click to expand...
Click to collapse
Do you developer for Oppo N1? I have feedback. Only 1 question, i can't move apps to sd card, it says not enough space, but o have 3+ gb on sd card. Any idea?

MuJIeHa said:
Do you developer for Oppo N1? I have feedback. Only 1 question, i can't move apps to sd card, it says not enough space, but o have 3+ gb on sd card. Any idea?
Click to expand...
Click to collapse
ATM we do not have a specific dev for the n1. So we work off a feedback there. Apps --> SD should be possible (may need a 3rd party app). But if you recommend a specific github that offers it we can cherry-pick it for you.
Make sure you @MENTION me in responce. It's the only notifications that work for me on XDA.

MuJIeHa said:
Do you developer for Oppo N1? I have feedback. Only 1 question, i can't move apps to sd card, it says not enough space, but o have 3+ gb on sd card. Any idea?
Click to expand...
Click to collapse
That's the problem with partition type in Oppo. Unfortunately, there is no easy workaround. OmniROM developers were working on it, but so far we don't have unified partition. Perhaps Oppo could fix it.

praveen22 said:
That's the problem with partition type in Oppo. Unfortunately, there is no easy workaround. OmniROM developers were working on it, but so far we don't have unified partition. Perhaps Oppo could fix it.
Click to expand...
Click to collapse
oh thanks, waiting when they solve.. Very big problem to me, every day need to clear space on internal memory and delete program's. If that problem not solve - i'm downgrade to cm11

praveen22 said:
That's the problem with partition type in Oppo. Unfortunately, there is no easy workaround. OmniROM developers were working on it, but so far we don't have unified partition. Perhaps Oppo could fix it.
Click to expand...
Click to collapse
Thanks for Vanir developers! All works fine (o-touch, o-click, move to sd, etc.) in last night build from 02.17.15! The best custom rom based android L for Oppo N1 :good:

MuJIeHa said:
Thanks for Vanir developers! All works fine (o-touch, o-click, move to sd, etc.) in last night build from 02.17.15! The best custom rom based android L for Oppo N1 :good:
Click to expand...
Click to collapse
I tried the latest nightly. For some reason I am not getting any network. I get stuck at installation process where its "activating sim". Now I somehow end up getting network but only to lose it later. Is it happening with you too?

praveen22 said:
I tried the latest nightly. For some reason I am not getting any network. I get stuck at installation process where its "activating sim". Now I somehow end up getting network but only to lose it later. Is it happening with you too?
Click to expand...
Click to collapse
Sometime i need search network manually, but it's not critically for me, and not every day happening

MuJIeHa said:
Sometime i need search network manually, but it's not critically for me, and not every day happening
Click to expand...
Click to collapse
Maybe its me then.

praveen22 said:
Maybe its me then.
Click to expand...
Click to collapse
Nope, i've got the exact same issue. Tried reinserting my SIM over 10 times.
Had to revert to 4.4.4 until 5.0 build has a stable network connection.

IAmOmicron said:
Nope, i've got the exact same issue. Tried reinserting my SIM over 10 times.
Had to revert to 4.4.4 until 5.0 build has a stable network connection.
Click to expand...
Click to collapse
Try BlissPop's ROM until this is fixed here. Its not without its fair share of bugs and I doubt will be updated.
Link : http://www.romzj.com/rom/26410.htm
It starts with Chinese language but once you change the language, its pretty much same as every other ROM out there. Delete/Disable the bloat. It only takes 4-5 minutes more than flashing a normal ROM. That said, flash at your own risk
---------- Post added at 02:30 PM ---------- Previous post was at 02:10 PM ----------
@DHO Do you guys plan on implementing Camera2API for N1?

praveen22 said:
Try BlissPop's ROM until this is fixed here. Its not without its fair share of bugs and I doubt will be updated.
Link : http://www.romzj.com/rom/26410.htm
It starts with Chinese language but once you change the language, its pretty much same as every other ROM out there. Delete/Disable the bloat. It only takes 4-5 minutes more than flashing a normal ROM. That said, flash at your own risk
Click to expand...
Click to collapse
I have installed blissPOP actually, but i'm geting the same kind of issues . Not 100% of the time, but I would say about 90% of the time.
If I reboot my phone, the issue will arise again. It only seems to work correctly when I boot after I clear Dalvik, cache and android secure. I guess its an issue with my radio band?

IAmOmicron said:
I have installed blissPOP actually, but i'm geting the same kind of issues . Not 100% of the time, but I would say about 90% of the time.
If I reboot my phone, the issue will arise again. It only seems to work correctly when I boot after I clear Dalvik, cache and android secure. I guess its an issue with my radio band?
Click to expand...
Click to collapse
BlissPop works fine for me. May be it is.
@DHO What can we do to help address this issue?

praveen22 said:
BlissPop works fine for me. May be it is.
@DHO What can we do to help address this issue?
Click to expand...
Click to collapse
The ROM itself works really well, but the only issue is the mobile network just not working. It tells me a have signal, but with a (!) mark by it. Normally 4/5 bars with ! on the icon. Is it possible I missed a firmware update?
Also, after installing Vanir, it changed my phone's boot logo to a newer, smoother version of the 'Oppo, powered by android' text, to the right of the OPPO logo, there are a few pixels that are red and green. it's not a major issue, just a bit of a niggle.

Im looking over the link provided above to Bliss.
---------- Post added at 09:10 PM ---------- Previous post was at 08:58 PM ----------
N/m that link was to a chinese or other eastern lanaguage that Google did not want to translate
There is no n1 device tree on the only github that seems to be related
https://github.com/TeamBliss?query=n1

DHO said:
Im looking over the link provided above to Bliss.
---------- Post added at 09:10 PM ---------- Previous post was at 08:58 PM ----------
N/m that link was to a chinese or other eastern lanaguage that Google did not want to translate
There is no n1 device tree on the only github that seems to be related
https://github.com/TeamBliss?query=n1
Click to expand...
Click to collapse
Toggling aeroplane mode fixes the issue, but i don't know if this works for Vanir as well.
The ROM is labelled under 'moonlight roms', and I believe is an unofficial port to the N1.

DHO said:
Im looking over the link provided above to Bliss.
---------- Post added at 09:10 PM ---------- Previous post was at 08:58 PM ----------
N/m that link was to a chinese or other eastern lanaguage that Google did not want to translate
There is no n1 device tree on the only github that seems to be related
https://github.com/TeamBliss?query=n1
Click to expand...
Click to collapse
My bad. I should have mentioned its an unofficial port. Please don't bother yourself with it. Sorry for not posting it properly.
I was asking for what can I do to help you with Vanir ROM in order for it to recognize the sim.

After using Bliss and Vanir for a while, both of them are failing to get any mobile signal to be used. The icon now constantly has a ! attached to it.
I'm going to revert to kitkat until the issue is fixed, unfortunately I can't go on without a signal.

Bluetooth Stuttering
I've been having some issues with music audio (not phone audio, as far as I've been able to tell) being streamed over bluetooth to my headset. I've tried poking around in config files but I couldn't find anything that looked particularly obvious to tweak in order to allow smoother music playback.
Can anyone point me in the right direction?

[Q&A] [ROM] Cyanogenmod 11 06/04/2015

Q&A for [ROM] Cyanogenmod 11 06/04/2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cyanogenmod 11 06/04/2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

camera
hi. good job
video recorder not working

jocamoaz said:
hi. good job
video recorder not working
Click to expand...
Click to collapse
yeah that is a cm11 bug from before

I tried to (I got the cpu step) rom and I like. But what is the difference between RELEASE 3 and (got the cpu step) and I wonder fix some performance stabilization in Release 3

I wanted to write in that rom's forum but I have written so far

Sorry i cant speak good english, i want to flash this rom to my phone and the phone give it for me : installation aborted status 0. What can i make? my cwm is 6.0.3.2 and i want flash from other 4.4.2 rom.
Thanks for help.

first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.

devrieshh said:
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
Click to expand...
Click to collapse
can u add a link for me from cwm 6.0.5.3? please. thank you

Starchm said:
can u add a link for me from cwm 6.0.5.3? please. thank you
Click to expand...
Click to collapse
You can get it from this post here
http://forum.xda-developers.com/showthread.php?p=54754255
Sent from my XT1039 using XDA Free mobile app

....ty for link and helps

Hello !
I have recently installed this ROM (Release 4.5 + Video Recording patch). Everything works.
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.

Future development
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
burnout6010 said:
Hello !
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Click to expand...
Click to collapse
You should install these Gapps: link, it works well.
For CM11, of course.

corlik said:
You should install these Gapps: link, it works well.
For CM11, of course.
Click to expand...
Click to collapse
Thanks for answering.
I flashed a completely fresh install of the ROM with the indicated G-Apps (+CM-Account) and now get "Google Play Services has stopped" errors constantly.
Am I doing something wrong ? I don't understand.

corlik said:
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
Click to expand...
Click to collapse
Sorry for the late reply,
I might continue development for this phone. I might stop after I get a working camera for cm11 (autofocus).

Cloud
who have the latest version, just in another cloud (gdrive, one, mega) and tell me how to update the firmware version of the 2013 s to the final (possibly version bore the other person)

final download
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx

Cyber Skull said:
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Click to expand...
Click to collapse
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app

cvamoose said:
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
Click to expand...
Click to collapse
as i said im new to this and any suggestions

Interested in porting CM 13

Hello fellow XDA members, I recently purchased a Le Pro 3 and a Le S3 during the flash sale and would like to use Cyanogenmod on my devices. I was wondering if anyone on this forum has ever ported a ROM before as I have not, and only know about the CM porting guide and opensource.le.com for the kernel source. If anyone has any tips or would like to assist me in porting CM13 to the Pro 3 please reply to this thread or PM me. Thanks, and let's hope LeEco releases the source soon!

Love to help but this isn't my department ????. But we should probably see more support in a couple more days once they start arriving here

Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.

dr4stic said:
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
Click to expand...
Click to collapse
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?

limitlesscodes said:
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
Click to expand...
Click to collapse
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.

dr4stic said:
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
Click to expand...
Click to collapse
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.

limitlesscodes said:
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
Click to expand...
Click to collapse
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.

dr4stic said:
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
Click to expand...
Click to collapse
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?

limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Not a lot. I've identified the CAF tag the sources are based on and have been working to separate the relevant LeEco mods from the less relevant ones. I've also been attempting to remove the leeco specific things from the drivers that i'm keeping since they're a horrible mess and CM won't be able to make use of them anyway. I've also been finding the appropriate open versions of the drivers and taking the latest ones instead.
The mods from LeEco seem to be a mess, the dmesg output I got from a user on the chinese model (the x720) had segfaults from the modifications just after boot. The logcats are so full of errors I was unable to get the user to send me a full logcat from boot.
Interestingly enough, the chinese system rom looks like it came from a Le Max2. This makes sense since it's LeEco's first msm8996 device, and the Le Pro3 is the second one. I imagine the kernel sources work across a number of the 8996's.

Can you send me the link to where you got the open drivers.

limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Please share the sources.
Sent from my LEX727 using Tapatalk

ceo.mtcl said:
Please share the sources.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
here

limitlesscodes said:
here
Click to expand...
Click to collapse
Thank you so much!

limitlesscodes said:
here
Click to expand...
Click to collapse
This is not a International version? Its USA version? Where is the International source code?

Here's a mega mirror in case the drive link goes down.
https://mega.nz/#!7Ek3HYaB!1H0WibOjwlg1P0vaaJ2qcrAAsl-PjruB9-_X1ECqfnw
Wish i could help more, but it looks like the kernel source is in there too, perhaps that means a fully functional cm13 rom that works AT LEAST as well as the stock rom. VERY EXCITE!

+1

I'm also waiting for CM13.

csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
:good:

csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
giogio1 said:
:good:
Click to expand...
Click to collapse
Waiting for CM 14.1

http://opensource.le.com

Rr for zuk z2

Is anyone devloping RR rom?

This does not belong here.
Please let this be moved to the Question Section.
I also advise you to use the search function to find what you have been searching for.

Sorry

Here you go:
https://androidfilehost.com/?fid=817906626617938656
Unofficial build by AnjoVingador, which is great IMHO.

Where is the thread

luws said:
Here you go:
https://androidfilehost.com/?fid=817906626617938656
Unofficial build by AnjoVingador, which is great IMHO.
Click to expand...
Click to collapse
Where is the thread

Anmol d kool said:
Where is the thread
Click to expand...
Click to collapse
Nowhere, there's no thread

luws said:
Nowhere, there's no thread
Click to expand...
Click to collapse
So how will i get to know abt an update or report a bug

Anmol d kool said:
Is anyone devloping RR rom?
Click to expand...
Click to collapse
Official support for RR has been stopped for our device

visheshjain25 said:
Official support for RR has been stopped for our device
Click to expand...
Click to collapse
WTB the unofficial one?

Anmol d kool said:
So how will i get to know abt an update or report a bug
Click to expand...
Click to collapse
Well, I don't know... it might become official someday, I guess we'll have to wait to see.
So far, this unofficial build is the best option available for me, and I'm using it as my daily driver.
So, if you want, you can enjoy it, or you can simply choose another custom rom and move on...
Btw, in case you didn't know, there was an official build that was discontinued some time ago, you can check the official website for download. But the thread was closed and the rom is probably ''outdated'', so it won't be of any help if you want to report bugs and get support...

luws said:
Well, I don't know... it might become official someday, I guess we'll have to wait to see.
So far, this unofficial build is the best option available for me, and I'm using it as my daily driver.
So, if you want, you can enjoy it, or you can simply choose another custom rom and move on...
Btw, in case you didn't know, there was an official build that was discontinued some time ago, you can check the official website for download. But the thread was closed and the rom is probably ''outdated'', so it won't be of any help if you want to report bugs and get support...
Click to expand...
Click to collapse
Thnx. But if the unofficial update is released can u pm me the link?

Anmol d kool said:
Thnx. But if the unofficial update is released can u pm me the link?
Click to expand...
Click to collapse
YW. You can access the developer's AFH and check for new uploads, it's easier (I probably won't remember PMing you, sorry):
https://androidfilehost.com/?w=profile&uid=457095661767156286

luws said:
YW. You can access the developer's AFH and check for new uploads, it's easier (I probably won't remember PMing you, sorry):
https://androidfilehost.com/?w=profile&uid=457095661767156286
Click to expand...
Click to collapse
Thnx a lot...

Im doing tests with RR and AOKP by now, Dont know if i will try to be official yet, thats why i didnt make a thread yet, dont want to make one and close it in a month. I will create a thread when i decide to maintain it no matter what. Until this, you can follow me on AFH and contact me here if you want.

AnjoVingador said:
Im doing tests with RR and AOKP by now, Dont know if i will try to be official yet, thats why i didnt make a thread yet, dont want to make one and close it in a month. I will create a thread when i decide to maintain it no matter what. Until this, you can follow me on AFH and contact me here if you want.
Click to expand...
Click to collapse
Thanks for your work! Wich one you think its best, in terms of stability and fluidity?

Both are good, but the last AOKP i will remove, it has krack-n fix but has other bugs that i cant recommend use it, will make another one soon, another RR with krack-n fix is coming too.

AnjoVingador said:
Both are good, but the last AOKP i will remove, it has krack-n fix but has other bugs that i cant recommend use it, will make another one soon, another RR with krack-n fix is coming too.
Click to expand...
Click to collapse
i don"t know if it approprite to say here or not but i find some here and their very little lag in the latest rr build of yours plus i use it with heliox kernel latest i find overnight battery drain to be 15 to 20 percent ..please if u can take a look into this...thanx its an awsome rom the rom in which equilizer work from the rom i tested....

himzz0007 said:
i don"t know if it approprite to say here or not but i find some here and their very little lag in the latest rr build of yours plus i use it with heliox kernel latest i find overnight battery drain to be 15 to 20 percent ..please if u can take a look into this...thanx its an awsome rom the rom in which equilizer work from the rom i tested....
Click to expand...
Click to collapse
No such issues here, performance is great and deep sleep is amazing.

luws said:
No such issues here, performance is great and deep sleep is amazing.
Click to expand...
Click to collapse
you using the custom kernel or stock one???