Develop Bugs

[Q] Firmware upgrade encountered an issue. Please help!

Noob here, please be patient.
Samsung SGH-T989D was running CM 9. Did a factory reset as I was planing to sell the phone, but once I did that the phone was stuck in a loop at the boot logo.
Tried upgrading via recovery mode to the new CM 10, but was still stuck in boot loop.
Tried clearing cache, etc...but nothing would work.
So I downloaded the newest stock Telus ROM, put the phone into download mode and used Odin to flash - however Odin failed.
Now the phone won't start and I immediately get the following message: "Firmware upgrade encounted an issue. Please select recovery mode in Kies and try again".
I tried Kies recovery mode but it does not see my phone. Odin still sees it, but wont flash it.
I found this thread for the S2 - http://forum.xda-developers.com/showthread.php?t=1457458.
But I have not been able to find one for the S2x.. Where would I find the bootloader and kernel to flash as it explains in the above guide...
Or maybe someone has other advice?
Thanks for your help!!

http://forum.xda-developers.com/showthread.php?t=2076939
Lots of stuff the t989 there. Just be sure you actually have the t989 or t989d.
Or look through our dev section for probably more up to date stuff.
Sent from my cell phone telephone
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
Forget the other thread you found. That's not our phone and anything there that you flash could brick your phone!!
Sent from my cell phone telephone

fruzmatik said:
Noob here, please be patient.
Samsung SGH-T989D was running CM 9. Did a factory reset as I was planing to sell the phone, but once I did that the phone was stuck in a loop at the boot logo.
Tried upgrading via recovery mode to the new CM 10, but was still stuck in boot loop.
Tried clearing cache, etc...but nothing would work.
So I downloaded the newest stock Telus ROM, put the phone into download mode and used Odin to flash - however Odin failed.
Now the phone won't start and I immediately get the following message: "Firmware upgrade encounted an issue. Please select recovery mode in Kies and try again".
I tried Kies recovery mode but it does not see my phone. Odin still sees it, but wont flash it.
I found this thread for the S2 - http://forum.xda-developers.com/showthread.php?t=1457458.
But I have not been able to find one for the S2x.. Where would I find the bootloader and kernel to flash as it explains in the above guide...
Or maybe someone has other advice?
Thanks for your help!!
Click to expand...
Click to collapse
All u need to do is download Odin 1.85 to ur PC, then go to http://techerrata.com/browse/twrp2/hercules and download the twrp 2.6.6.0.tar.md5 to ur PC, power ur phone on in download mode, the same screen will come up "firmware...issue", kids will do nothing for this and u will need to make sure kids is NOT RUNNING. Odin will not see the device if kies is running at all, now open the Odin program and connect the phone to PC using OEM factory USB cable, on Odin it should say "added", now click the box PDA, find the twrp file u downloaded b4, click on that file and then hit start in Odin, DO NOT CHECK ANYTHING ELSE... Let Odin do its thing and u will be fine, Odin will reboot the phone and u will now have twrp recovery, boot to recovery to finish rooting process
Sent from my SGH-T989 using xda premium

soupysoup said:
All u need to do is download Odin 1.85 to ur PC, then go to and download the twrp 2.6.6.0.tar.md5 to ur PC, power ur phone on in download mode, the same screen will come up "firmware...issue", kids will do nothing for this and u will need to make sure kids is NOT RUNNING. Odin will not see the device if kies is running at all, now open the Odin program and connect the phone to PC using OEM factory USB cable, on Odin it should say "added", now click the box PDA, find the twrp file u downloaded b4, click on that file and then hit start in Odin, DO NOT CHECK ANYTHING ELSE... Let Odin do its thing and u will be fine, Odin will reboot the phone and u will now have twrp recovery, boot to recovery to finish rooting process
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Went to the site you linked but there is no twrp 2.6.6.0.tar.md5
I downloaded openrecovcery-twrp-2.6.0.0-hercules.tar
However, in Odin it still wont flash the phone (I closed all Kies processes beforehand).
This is all that happens - just hangs here...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..

kj2112 said:
Forget the other thread you found. That's not our phone and anything there that you flash could brick your phone!!
Sent from my cell phone telephone
Click to expand...
Click to collapse
I wasnt going to use the files from the other thread, I just assumed I could try this procedure once I got the correct files for the SGH-T989D:
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
You deserve some cake afterwards, and some rest
Now, if your problem is the NAND rw coruption, and wasn't fixed by the above fix, then follow these steps :
5) Download the Kernel. Flash it in PDA. Without ticking Re-Partitioning
6) Successful? Nice, hope is still present.
7) Flash the recovery package, following steps 1-4 This should fix your issue. If it does not, then :
WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues
11) After you have recovered your phone, I advise you to have your phone completely up to date by browsing and downloading the firmware for your version through SamMobile!

fruzmatik said:
I wasnt going to use the files from the other thread, I just assumed I could try this procedure once I got the correct files for the SGH-T989D:
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
You deserve some cake afterwards, and some rest
Now, if your problem is the NAND rw coruption, and wasn't fixed by the above fix, then follow these steps :
5) Download the Kernel. Flash it in PDA. Without ticking Re-Partitioning
6) Successful? Nice, hope is still present.
7) Flash the recovery package, following steps 1-4 This should fix your issue. If it does not, then :
WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues
11) After you have recovered your phone, I advise you to have your phone completely up to date by browsing and downloading the firmware for your version through SamMobile!
Click to expand...
Click to collapse
Make sure u have the stock USB cord, and remove kies totally from ur PC, even if u think its not running it still may interfere with Odin, do not, do not touch anything on Odin besides PDA, and as long as u download the recovery tar file from the link I gave u, have the factory cable, and are in Odin it will work, try diff com ports on ur PC, mine likes com5 urs may be different, I had the exact same issue and freaked out like I assume u did and this was how I fixed it, u do not have a soft brick, u have a firmware malfunction, the guide for soft brick won't help u, try twrp 2.4, that's the one that fixed mine, if u need help pm me or hangouts an I'll walk u through it step by step...
Sent from my SGH-T989 using xda premium

soupysoup said:
Make sure u have the stock USB cord, and remove kies totally from ur PC, even if u think its not running it still may interfere with Odin, do not, do not touch anything on Odin besides PDA, and as long as u download the recovery tar file from the link I gave u, have the factory cable, and are in Odin it will work, try diff com ports on ur PC, mine likes com5 urs may be different, I had the exact same issue and freaked out like I assume u did and this was how I fixed it, u do not have a soft brick, u have a firmware malfunction, the guide for soft brick won't help u, try twrp 2.4, that's the one that fixed mine, if u need help pm me or hangouts an I'll walk u through it step by step...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks! Switched to a different computer and had no issues flashing.

fruzmatik said:
Thanks! Switched to a different computer and had no issues flashing.
Click to expand...
Click to collapse
Glad I could help, sometimes even if u think kies isn't affecting odin it just might be, happy I could be of assist, hit that thanks button if u like lol
Sent from my SGH-T989 using xda premium

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.

Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.

QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe

louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.

Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone

Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!

No recovery stuck on bootloop
im having the same issue could you post that dropbox link again

So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader

Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?

louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out

my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app

yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse

hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.

QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help

yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse

For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).

Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it

[Q] Samsung GT-i5510M brick, need help

hey everyone
i have a bricked GT-I5510M and i really dont know what to do with it
when i try to power on the phone, nothing happen, only a black screen. the exact same thing happen if i try to go to recovery.
but i can access download mode and emergency download mode.
i tried to flash a stock rom using odin in download mode, everything worked except when the phone rebooted, again, a black screen.
what should i do ? i'm pretty sure i tried everything..

skfunnyboy said:
hey everyone
i have a bricked GT-I5510M and i really dont know what to do with it
when i try to power on the phone, nothing happen, only a black screen. the exact same thing happen if i try to go to recovery.
but i can access download mode and emergency download mode.
i tried to flash a stock rom using odin in download mode, everything worked except when the phone rebooted, again, a black screen.
what should i do ? i'm pretty sure i tried everything..
Click to expand...
Click to collapse
Are you sure you're using correct versions of Odin+firmware?
Did you uninstall KIES before flashing?

LS.xD said:
Are you sure you're using correct versions of Odin+firmware?
Did you uninstall KIES before flashing?
Click to expand...
Click to collapse
yeah i'm pretty sure i'm using the correct version
(the name of the tar is I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar and the version of odin is 4.34, and i'm using the CALLISTO ops)
and no kies is still installed but i did flashed another samsung phone using odin and it worked, but ill try without kies installed, we never know :fingers-crossed:

Double-check that you have a working firmware image. I used the stock firmware package with this MD5 to restore a bad Cyanogenmod flash on a GT-I5510M phone:
Code:
a8ab8ec4154548b6a9873e6c04937c96 *BMC-I5510UGKC5-20110331113635.zip
38375ba92ffe3819bc25f7e28dd28812 *I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar
The ZIP file contains the TAR file. Flash the TAR file to the GT-I15510M phone through Odin in "One Package" mode with the OPS file for this phone.
I haven't been able to find a custom recovery package that is actually compatible with this Samsung Galaxy 511 submodel. Most of the forum posts regarding the GT-I15510 family are inaccurate or sloppy.

try flashing stock ROM

dajhorn said:
Double-check that you have a working firmware image. I used the stock firmware package with this MD5 to restore a bad Cyanogenmod flash on a GT-I5510M phone:
Code:
a8ab8ec4154548b6a9873e6c04937c96 *BMC-I5510UGKC5-20110331113635.zip
38375ba92ffe3819bc25f7e28dd28812 *I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar
The ZIP file contains the TAR file. Flash the TAR file to the GT-I15510M phone through Odin in "One Package" mode with the OPS file for this phone.
I haven't been able to find a custom recovery package that is actually compatible with this Samsung Galaxy 511 submodel. Most of the forum posts regarding the GT-I15510 family are inaccurate or sloppy.
Click to expand...
Click to collapse
i have the correct firmware image, the md5 is the same.

try this install stock firmware. If its not turning on. Install cwm recovery via odin and try to get into the recovery and install a rom(I installed kitkat experience rom by burnmode). Its working now alhamdulillah.
Sent from my GT-I5510 using XDA Free mobile app

[Q] AT&T bricked my S3 - Help please.

Ok the backround. about 5 days ago the software update started. All seemed ok but then I was getting reboots 4-5 times a day. Brought it to AT&T and they tried to reflash. After backing up info I signed the release form holding them not liable for bricking the phone. Asked the tech how many have bricked on him and he said none. Sorry I was his first...maybe. Screen asking for Kies program to repair. AT&T tech not allowed to use Kies. I downloaded Kies but no luck.
Got the bugger to go to the Boot screen of "Warning...a custom OS....". Then the "Downloading, do not turn of target" screen. It is stuck there or I should say I have left it there. Top of screen says Odin Mode (in red), Produce Name: SGH-I747, Current Binary: Samsung Official, Qualcomm SecureBoot: Enabled, Warranty Bit: 0, Bootloader Ap SWREV: 3.
I have downloaded Odin 3.09. I have the USB drivers installed. I want to restore last known version of AT&T android 4.2.2 or the upgrade 4.3 that didn't seem to take. I am not sure which version it was running before the crash. My wife's S3 is running 4.3.
What Next? Where do I get the file to upload to the phone? Thanks.

So your s3 was trying to upgrade from 4.1.2 or 4.3?

thenexusgeneration said:
So your s3 was trying to upgrade from 4.1.2 or 4.3?
Click to expand...
Click to collapse
Not sure. I think I checked the build version after the install and it read 4.2.2. Can't be absolutely certain when i saw that build number. Would make sense to check it after the install assuming the install happened at all. But again the wife and I bought the two S3's at the same time and hers is running 4.3.

If you got the ota a few days ago, and judging from the SWREV (Software Revision), you are currently on 4.4.2 firmware (NE4). This means you cannot flash older firmware on Odin (or any other way, OT it'll really brick). From now on you can only flash NE4 firmware.
You can, however, flash older roms.
If you haven't already, try factory resetting from recovery. (This will wipe all your data including the internal sdcard)
If that doesnt work, my only other suggestion is to flash TWRP via Odin, then boot TWRP recovery and flash the stock NE4 rom from enewman17.

DocHoliday77 said:
If you got the ota a few days ago, and judging from the SWREV (Software Revision), you are currently on 4.4.2 firmware (NE4). This means you cannot flash older firmware on Odin (or any other way, OT it'll really brick). From now on you can only flash NE4 firmware.
You can, however, flash older roms.
If you haven't already, try factory resetting from recovery. (This will wipe all your data including the internal sdcard)
If that doesnt work, my only other suggestion is to flash TWRP via Odin, then boot TWRP recovery and flash the stock NE4 rom from enewman17.
Click to expand...
Click to collapse
I can't get to the factory reset screen, only the warning screen before pressing volume up to load a custom OS. I'm confused....well on may levels but I digress. I thought ROM and firmware were the same thing.
Also the TWRP site has two files, same file I Assume, in different formats, md5 and tar. Are they the same file? Do I use one over the other? To flash TWRP using Odin what screen should I start with on the S3? thanks.

To boot recovery hold volume up, home and power. When it vibrates release power only.
A rom (as we use it here) is just the O/S on the /system partition and is usually flashed in recovery. They also include kernels most of the time. The firmware is this, and more. It includes images for multiple partitions. (aboot, sbl2, sbl3, tz, rpm, modem, recovery, boot, system, cache)
Around here you'll see a lot of folks refer to this as just the bootloaders, but they are talking about the base firmware. Sorry if I confuse anyone with that btw, I try to remember to call it the bootloaders, but am just used to using the term firmware.
As for flashing twrp from odin, it must be a .tar or .tar.md5. Both are used by odin. The .md5 extension just tells odin a hash value is included. It will then run an md5 checksum to verify the file about to be flashed is valid, or not corrupted. Either one will work, but the .tar.md5 is safer. If the download gets corrupted somehow, odin will catch it and refuse to flash.
When flashing anything in odin you need to be in Download mode.

DocHoliday77 said:
To boot recovery hold volume up, home and power. When it vibrates release power only.
A rom (as we use it here) is just the O/S on the /system partition and is usually flashed in recovery. They also include kernels most of the time. The firmware is this, and more. It includes images for multiple partitions. (aboot, sbl2, sbl3, tz, rpm, modem, recovery, boot, system, cache)
Around here you'll see a lot of folks refer to this as just the bootloaders, but they are talking about the base firmware. Sorry if I confuse anyone with that btw, I try to remember to call it the bootloaders, but am just used to using the term firmware.
As for flashing twrp from odin, it must be a .tar or .tar.md5. Both are used by odin. The .md5 extension just tells odin a hash value is included. It will then run an md5 checksum to verify the file about to be flashed is valid, or not corrupted. Either one will work, but the .tar.md5 is safer. If the download gets corrupted somehow, odin will catch it and refuse to flash.
When flashing anything in odin you need to be in Download mode.
Click to expand...
Click to collapse
Thanks Doc, when I try the boot recovery hold volume up, home and power I get the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." message. If I use the hold volume down, home and power combo I get to the "Warning!! A custom Os can cause....." screen. If I press volume up it goes to the "Downloading...Do not turn off target!!" screen. If I press volume down it reboots to the "Kies" screen. Which screen mode should I be in when attempting to flash the TWRP file with Odin? thanks.
OK I tried to flash the TWRP file. Put S3 in download mode, Opened Odin, plugged in S3, Odin showed "added", tried to load the TWRP file into Odin but it freezes Odin. Non responsive Odin. Tried 4 times with and without plugging in phone. any clues?

Try downloading the file again. Could be a corrupted download. Also, what version of Odin are you using?
Oh, and kies interferes with Odin. Uninstall it and try odin again.

DocHoliday77 said:
Try downloading the file again. Could be a corrupted download. Also, what version of Odin are you using?
Oh, and kies interferes with Odin. Uninstall it and try odin again.[/QUOTE
Thanks I tried 3.09 first then 3.07. 3.09 hangs right away. 3.07 doesn't say "not responding" but nothing happens. Looks like it will but no. I wait for about 45 min. I will try everything from scratch. I did uninstall Kies with no help. Kies can't find the device - generic code 43.
Is it the Bootloader ap SWREV: 3 that indicates I need 4.4.2?
If its an older version such as 4.3 can i/should I still install 4.4.2?
Where do I find 4.4.2. Thanks for all your help because this is like finding a specific needle in a stack of needles without even fulling understanding what a needle is! God I miss DOS.
I've been doing all the above without sim or sd card installed. Does that make any difference.
Click to expand...
Click to collapse

IT's BACK ALIVE! Now what?
What happened? None of the .MD5 files would load and would just lock the Odin. Since I had nothing to loose I used a 2.6 version of the .tar file without the .MD5 check. It loaded fine, rebooted and there is my phone screen with all my apps and info. I'm afraid to even unplug it from the cable (silly I know). Checked the version and it reads 4.4.2., baseband version I747UCUFNE4, Kernel version 3.4.0-1514807, build number KOT49H.I171UCUFNE4, SE for Android status Enforcing SEPF_SAMSUNG-SGH-I747_4.4.2_0016.
Am I done? Is it safe to put back in service or should I do something else? thanks

Weird! Sounds like something on your system didn't like the md5sum. Never seen that before!
But if it appeared to flash ok, rebooted and it says PASS in Odin, you should be good to go.
First though, what exactly did you flash? Can you link to it? To my knowledge there is no NE4 firmware package available. Ive been trying to make one but it hasn't worked yet....

DocHoliday77 said:
Weird! Sounds like something on your system didn't like the md5sum. Never seen that before!
But if it appeared to flash ok, rebooted and it says PASS in Odin, you should be good to go.
First though, what exactly did you flash? Can you link to it? To my knowledge there is no NE4 firmware package available. Ive been trying to make one but it hasn't worked yet....
Click to expand...
Click to collapse
Just flashed the TWRP http://true-android.blogspot.com/2014/01/install-twrp-recovery-2631-on-at-galaxy.html. It passed it and phone rebooted to the normal reboot and my old screen. Weird? I do weird all the time. I used Odin 3.09. I have run it through some of its apps. I will wait 24 hours to see if it reboots by itself.

Cool, sounds like it should be ok then. Hopefully it'll make it through your testing period!

DocHoliday77 said:
Cool, sounds like it should be ok then. Hopefully it'll make it through your testing period!
Click to expand...
Click to collapse
Well it's functioning but we are back to the reboots 4-5 x a day. I can get to the recovery screen now. Anyone have a guess of my best next option?

Not sure, could be a faulty power switch though. Lots of these have been going bad in recent months, but it usually happens all the time, not just a few times a day.
Sent from my SGH-T999 using Tapatalk

Just a F/U. The reboot was getting to be a problem. Also had a problem with back up and restore apps. Found one that worked so I did a factory reset. All is good again. Love my S3 again. Still not happy with how AT&T handled the problem though.

Help me Pls

Hi peeps,
I encountered a problem with my s3 today. My s3 is already rooted and it used to have twrp. I went into twrp and decided to delete my stuff, without giving a second thought, I check all of the checklist and now my phone has no OS. When I turn it on, the screen will stuck at the samsung galaxy s3 and wont move past that. I tried using odin and the s3 att stock rom but it wont download into the phone. Can you guys help me pls?
Thank you

We need to know what bootloader was on your phone. Does TWRP still work?

audit13 said:
We need to know what bootloader was on your phone. Does TWRP still work?
Click to expand...
Click to collapse
I did another stupid thing and the twrp doesnt work anymore. How do I check my bootloader?

Let's get your phoneup and running for now.
Do you have an external SD card? If you do, copy the latest CM11 for the d2lte to the card.
Use Odin to install the most recent tar version of Philz Touch for the d2lte from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/ . Do no check anything except F.Reset.Time in Odin.
Once you see Reset in the Odin's status window, disconnect the USB cable, pull the battery.
Insert the SD card into your phone. Insert the battery, boot into recovery, and flash CM11, reboot the phone.

Tried installing with Odin but it keeps failing. It says "Unsupported dev_type"

Odin is giving that error message?
Make sure you are flashing the correct tar.md5 file. It goes in the PDA box of Odin.

audit13 said:
Odin is giving that error message?
Make sure you are flashing the correct tar.md5 file. It goes in the PDA box of Odin.
Click to expand...
Click to collapse
My phone is giving that message. The file I downloaded was zip. When I tried renaming it, it wouldnt let me

Unzip it. Odin only flashes .tar and .tar.md5
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Download the tar.md5 file. No need to unzip the file. Just flash it in the PDA box in Odin.

Sorry, I was thinking of full firmware, not just the recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Thank you all for helping me. I got it to work.

you coulda just wipe cache and davik =)