Related
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since phones today have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
I also second this. Anyone that has this screen protector please respond.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I just found out that Spigen is selling a new type of tempered Glass screen protector it is "GLAS.T" it's different from the old one. This new one is all transparent and has adhesive all through-out the back part of the screen protector, unlike the old one which has paint on the borders and only adhesive on the painted area.
Spigen has GLAS.T for Note 1 Anyone that used the product for about 5-6 months now?
ichilouch said:
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since phones today have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
Click to expand...
Click to collapse
I have a tempered glass screen protector for my Note 3 and it fits and works perfectly. It's been on my phone for 2 months now. Not a single scratch to it and no peeling or dust accumulation at all. I would recommend one any time over a plastic protector. I got mine from a company called fasttech. They are very cheap compared to UK sellers and the company is very reliable even considering that they are Chinese.
Tempered glass has an adhesive throughout the whole surface, not only the bezel/perimeter area.
The difference is very simple. If you want scratch protection, get a film screen protector, but make sure to get quality PET 3H hardness film like the one sold by iSmooth and Spigen. Cheap ebay stuff is thin, will scratch, will bubble after some time, and will have rainbow effect under the florescent light. If you want ultimate shatter protection - get tempered glass. On impact the glass will shatter without affecting your display. Spigen and Seidio makes some of the best ones. I'm personally a big fan of Seidio VITREO and been using it on my Note 2 for a very long time.
for LG g2 temperate glass or we don't have to buy anything
I use the tempered glass for the LG G2, i think its better than a film protector.
No bubbles nothing, very clean. if you dont look at the edges u wont see there is a protector.
4ex said:
I use the tempered glass for the LG G2, i think its better than a film protector.
No bubbles nothing, very clean. if you dont look at the edges u wont see there is a protector.
Click to expand...
Click to collapse
i've really no bubbles, just use the type method to remove bubles cause by dust.
the cons is that film protector changes a bit the polarization of my glass so it has more strange effect on very high view angle
cocconut said:
i've really no bubbles, just use the type method to remove bubles cause by dust.
the cons is that film protector changes a bit the polarization of my glass so it has more strange effect on very high view angle
Click to expand...
Click to collapse
Did u try a tempered glass or went straight to the film protector?
I tried 2 film protectors but i wasn't satisfied with that but the tempered glass is really fine for me.
Pros & cons of Tempered glass screen protector
4ex said:
Did u try a tempered glass or went straight to the film protector?
I tried 2 film protectors but i wasn't satisfied with that but the tempered glass is really fine for me.
Click to expand...
Click to collapse
The advantages of T. glass over films are the following.
-. Scratch - (almost)free : sellers boast it is harder than stock display, but I don't agree with. Glass screen protector also gets scratch.
-. Superb feeling : yes. its feeling is real better even stock display including any premium film. http://vimeo.com/91463403
-. Bubble -Free : Yes. it is easy to install and you don't worry about bubble.
Disadvantages
-. Price : $5~40 : I have tried $5 and 40 as well. I don't recommend both $5 and $40. you can find good one between them.
-. Thickness :0.15~0.4mm : Compared to film, it is bulky. Sometimes it won't be compatible with certain cases. (I don't recommend too thin one, since it is easy to brake before doing its protection job)
i have used a glass screen protector for the last month until it broke when i dropped my phone from hip height. i am extremely satisfied by the product. as it is rigid, it is very easy to apply and in contrast with plastic film protectors, the tempered glass lets your fingers glide on the screen. i was also impressed by the fact that after 1 month's use my phone had zero scratches, even though i was kind of provoking scratches by the way i was handling the phone. never going back to plastic film, not a slight chance there.
I've run a gauntlet recently with screen protectors and cases with my galaxy s7 edge. I can definitely tell you the pros and cons between tempered glass and soft film screen protectors.
Tempered glass pros- much sturdier, better scratch resistance, looks better. Easier to install. Longer field life. Better phone protection all around.
Tempered glass cons: some cases won't work with tempered glass unless it has a top that fully covers the glass. Dust buildup under screen protector, less sensitivity- much less. Won't work with an otterbox symmetry because the sides and front push the glass up and out but does work with the defender because the defender covers the edge of the screen. If sand or dirt gets underneath glsss, it could scratch up your screen. Very thick too.
PET film pros- better sensitivity, will work with any phone case. Sturdy enough for the most part. No issues with dust buildup under the cover. Works with any case and has better adherence. Very thin.
PET cons- they look cheap and scratch more easily than tempered glass and you can tell that the phone has a screen protector. Harder to install. The protector scratches but the phone screen doesn't. Shorter field life.
Personally, I prefer PET film screen protectors to tempered glass but to be fair, I have an edge phone and glass screen protectors with edge phones can be more finicky than flat phones. Glass looks better, but aside from drop protection and looks, they don't keep the dirt out and can be a chore with the wrong kind of cases, or simply won't work.
I think film is much more versatile and I'm willing to trade some aesthetics in favor of usability. That's my 2 cents on both types of screen protectors based on recent experience.
---------- Post added at 06:46 AM ---------- Previous post was at 06:36 AM ----------
And liquid bubbles with soft cases go away in a few days. Air must be popped and dust must be removed physically but moisture does dry out. You can tell a moisture bubble because it has rainbow swirls if you view the phone on a screen with a white background.
Don't try to iron out small moisture bubbles or press them out. They go away on their own within a week and if you mess with them you can bend your soft screen protector out of shape or get divot lines.
Also, if the soft screen protector has the oleophobic coating, it does work very well, in fact it's almost if not better about prints and crap on the screen than actual glass screens. Plus, tempered glass can be a problem on certain phones.
My friend has a note 5 with a tempered glass screen protector and he dropped his phone (no case) so instead of the screen shattering, the back of the phone did. Protectors work, but if you have a glass coated phone- better have a case on it.
I want to use my phone without any case. I'm not afraid of scratches, but I'm afraid of screen cracking if I drop my phone. So my question is: if I use tempered glass, will it protect my screen from cracking? Or they will both be cracked? And I also want that glass is the thinnest. So I was thinking about getting 0.15 mm tempered glass. Is it different from 0.3mm or 0.4mm in term of protection, or does only the hardness matter?
Thank you for your reply.
I've dropped mine many many times onto wood and concrete without a screen protector. The phone is a little chipped and scratched, but the screen is absolutely fine.
A nilkin tempered glass screen protector is a good investment as it feels brilliant although when I dropped mine with that on it smashed the corner of the protector.
The edges of the phone are slightly raised so without the screen protector on, a drop onto a flat surface will not damage the screen but will damage the screen protector.
A drop onto a raised surface like a stone would probably break the screen protector but don't know if it'd also damage the screen.
Question is, how often do you drop your phone, and how much do you want to spend on glass protectors?
HtcOneJon said:
I've dropped mine many many times onto wood and concrete without a screen protector. The phone is a little chipped and scratched, but the screen is absolutely fine.
A nilkin tempered glass screen protector is a good investment as it feels brilliant although when I dropped mine with that on it smashed the corner of the protector.
The edges of the phone are slightly raised so without the screen protector on, a drop onto a flat surface will not damage the screen but will damage the screen protector.
A drop onto a raised surface like a stone would probably break the screen protector but don't know if it'd also damage the screen.
Question is, how often do you drop your phone, and how much do you want to spend on glass protectors?
Click to expand...
Click to collapse
I was thinking about Nillkin, but I think it would be too thick. So I'm considering those 0.15 mm protectors in this topic: http://forum.xda-developers.com/htc...5mm-dot-view-friendly-tempered-glass-t2810825
I also thought about xtremeguard, since I use their normal protectors and they are great. It 50$, but with 85% off coupon it's just a few bucks. Only problem is that it's 0.4mm.
Which one would you recommend? I'm planning to spend 10-15$, because 40-50$ is really to much for a protector, in my opinion.
This is the one I use:
ZeroLemon® Ultra Glass Armor - 9H Premium Tempered Glass Screen Protector for HTC One M8
Oditius said:
This is the one I use:
ZeroLemon® Ultra Glass Armor - 9H Premium Tempered Glass Screen Protector for HTC One M8
Click to expand...
Click to collapse
Is it noticable a lot while it's on the phone, since it's 0.3mm?
HTC_One_M8_91 said:
Is it noticable a lot while it's on the phone, since it's 0.3mm?
Click to expand...
Click to collapse
If your looking for it, but after putting on, I haven't paid much attention to it. I dropped my phone once, chipped away at the edges of the shield. The seller replaced it free. I like tempered glass, it is the only screen proctor I will put on my phones. The only bad thing is that it goes edge to edge with the glass. So if you have a case that touches the screen, that might cause a problem. I use a thin clear cars I got off ebay. Works for me.
Ultra 0.5mm Slim TPU Skin Clear new Case Transparent Cover
Oditius said:
If your looking for it, but after putting on, I haven't paid much attention to it. I dropped my phone once, chipped away at the edges of the shield. The seller replaced it free. I like tempered glass, it is the only screen proctor I will put on my phones. The only bad thing is that it goes edge to edge with the glass. So if you have a case that touches the screen, that might cause a problem. I use a thin clear cars I got off ebay. Works for me.
Ultra 0.5mm Slim TPU Skin Clear new Case Transparent Cover
Click to expand...
Click to collapse
The only annoying thing could be top edge, when I pull down notification bar.
Case wouldn't be a problem, because I'm planning to use phone without case, and that why I'm looking for a tempered glass, to protect screen from cracking.
HTC_One_M8_91 said:
The only annoying thing could be top edge, when I pull down notification bar.
Case wouldn't be a problem, because I'm planning to use phone without case, and that why I'm looking for a tempered glass, to protect screen from cracking.
Click to expand...
Click to collapse
Actually then it could be a benefit, because going edge to edge means you will probably not touch the edge. And the edge is not sharp, nice and smooth. The price is cheap enough to try it. I have tried several over the last few months, mostly from China. But this is US born and works and feels great.
Has anyone had any luck in finding a decent curved glass screen protector?
Nope :/ bought a flat Tempered glass but it got Side halo and dirt removed that then bought screen guard ..but removed it too, cause of sensitivity issue. Using it with a Nillkin case only.
Shrikesan said:
Nope :/ bought a flat Tempered glass but it got Side halo and dirt removed that then bought screen guard ..but removed it too, cause of sensitivity issue. Using it with a Nillkin case only.
Click to expand...
Click to collapse
That sounds like the problems I had. I got a 3d curved tempered glass and it fitted perfect but I could see a rainbow effect from the glue down the sides and had to pound on the keyboard to type so had to bin it. I've seen ones with silicone adhesive online but not for the xa.
Go with alien shield guys... Works perfectly with curved screens...
Sent from the center of the galaxy
I bought an Edge to Edge tempered glass from good mobile accessory shop and got it fitted in my Mi10 by a professional technician there itself.After a week or so there developed one or two air bubbles in the screen and they began to grow big covering half of my screen.So I approached the shop again and they repalaced the glass with a new one.After about 2 weeks there began to develop air bubbles again and they growing in size gradually.My had not dropped anywhere from me or others.So what is the reason for this?If I replace the tempered glass with a Screen Protector film,can the developing of air bubbles be completely prevented?Aso will this actually protect the phone screen glass from breaking in the event of a fall?Can anyone suggest a good quality Tempered glass and good quality Scree Protector Film?
pnsdhrn said:
I bought an Edge to Edge tempered glass from good mobile accessory shop and got it fitted in my Mi10 by a professional technician there itself.After a week or so there developed one or two air bubbles in the screen and they began to grow big covering half of my screen.So I approached the shop again and they repalaced the glass with a new one.After about 2 weeks there began to develop air bubbles again and they growing in size gradually.My had not dropped anywhere from me or others.So what is the reason for this?If I replace the tempered glass with a Screen Protector film,can the developing of air bubbles be completely prevented?Aso will this actually protect the phone screen glass from breaking in the event of a fall?Can anyone suggest a good quality Tempered glass and good quality Scree Protector Film?
Click to expand...
Click to collapse
It will offer some protection but if the phone lands a certain way the screen is going to crack regardless of what you've got on.
I just used a basic film one but the fingerprint is a bit crap. Glass ones never fitted right.
Hey you can try using Siege Glastimate+ for Galaxy S20+. It's a UV glue tempered glass. Price is quite high but it is really case friendly tbh bc im using the glass with my Ringke Fusion-X casing with no problem. And also the tempered glass has no touch issues whatsoever bc it is a UV glue not like normal tempered glass with edge only glue. And for the back panel I'm using a cheap carbon fibre sticker to avoid scratches haha
I bought the one from *******.. to much of my surprise it actually is quite good.
Installation was easy with an included guide/holder. The film has 2 parts that lets you apply the top half first then the bottom.
It's super thin, like what you'd see from the factory. The TPU film is also really smooth.
(Not affiliate link)
https://www.amazon.com/*******-Protector-Display-Fingerprint-Support/dp/B085DB4T83
Not sure why it's putting *** in place of the brand name
Did you test Spigen? The one applied from default is really poor, it is scratched very easily
tlxxxsracer said:
I bought the one from *******.. to much of my surprise it actually is quite good.
Installation was easy with an included guide/holder. The film has 2 parts that lets you apply the top half first then the bottom.
It's super thin, like what you'd see from the factory. The TPU film is also really smooth.
(Not affiliate link)
https://www.amazon.com/*******-Protector-Display-Fingerprint-Support/dp/B085DB4T83
Not sure why it's putting *** in place of the brand name
Click to expand...
Click to collapse
Did any of you found a good screen protector that is case friendly? I want to use it with a Spigen case. Thanks!
From experience of using front screen glass protectors for the fold 3, which would you recommend for the fold 4?
Yes won't purchase from whitestone due to bad support they gave when trying to get support on screen protector and how rude they were. Even though I used to recommend them a lot before. But when needed. They failed. But that was my experience. Should be decent but haven't used them for more than a year since it happened. With the note 20 ultra release.
Spigen looks decent but haven't used their screen protectors as used AMfilm. But they don't seem to have for the fold. So still seeing on what to use. As well.
But seeing both would be about same warranty just depends on who handles it better.
The Spigen comes with guide to install it but whitestone comes with 2 at a cheaper price.
The good thing of these is not as the note series that they are $30 to $45 per pack.
The Spigen is so easy to install, plus I don't see the point of installing or replace the inner screen protector. We can get Samsung to do it for free? or cheaply after a year.
I went with the non liquid adhesive whitestone simply because i have it on my fold 3 and it works well. Plus the kit came with a film hinge protector as well.
this one. it involve soap water while applying. i dont know if we can apply the inside protector over and bove the stock one on inside screen
https://www.amazon.in/gp/product/B0B9YQF2LF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Installed the Whitestone last night with no issues. This one is not as easy as the Spigen since there is no lineup template but I like that I received 2 front screen protectors, a camera protector and an edge guard.
can we apply screen procetor above the factory one inside? last year the inside screen protector oleophobic coating got weared off and it was so hard to scroll. this time thinking of applying another one, so that i can change it every 5months or so
I applied the Spigen EZFit on my Fold4 today, came out perfect. They make a great product, been buying their stuff for years.
Recieved my fold 4 today
Immediately i put on spigen glass Tr
The front tempered glass is good
And doesn’t interfere with the case lips
But the hinge protector is not working as advertised.
The hinge protector from spigen is very thin already but after installing it, everytime i open or close the screen it will get caught up and peeled off on edges
Maybe the gap between the hinge and the screen is slimmer this time
So I don’t think we can put any protector on the hinge without interfering with the mechanism.
On my old flip 1 it was ok
I tried the Whitestone and it is smaller than the front screen?!?!?!? I should send it back!
Flame Red said:
I tried the Whitestone and it is smaller than the front screen?!?!?!? I should send it back!
Click to expand...
Click to collapse
You kinda want a smaller screen protector because the case will take up the rest of the screen
Flame Red said:
I tried the Whitestone and it is smaller than the front screen?!?!?!? I should send it back!
Click to expand...
Click to collapse
Yeah they all are, so cases don't lift it. I've put a Samsung one on now, not glass one.
10-Dee-Q said:
Recieved my fold 4 today
Immediately i put on spigen glass Tr
The front tempered glass is good
And doesn’t interfere with the case lips
But the hinge protector is not working as advertised.
The hinge protector from spigen is very thin already but after installing it, everytime i open or close the screen it will get caught up and peeled off on edges
Maybe the gap between the hinge and the screen is slimmer this time
So I don’t think we can put any protector on the hinge without interfering with the mechanism.
On my old flip 1 it was ok
Click to expand...
Click to collapse
Yeah had the exact same thing, took it off, ordered full body skin instead
I also got the whitestone. I must say it perfectly covers the actual LCD part with about 2mm extra glass borders. The camera lense cutout is quite perfect as well, with the face unlock light ring lining up perfectly. I would certainly have preferred the glass to be taller and wider, but that's to prevent case interference as we know. Sometimes later in the cycle certain companies release their "edge to edge" screen protects, would want to see if any of them come up.
The included camera cover also fits quite perfectly, no have issues with the official Samsung case cutout.
The included hinge protector film I didn't try, not sure if it would mess with the mechanism to keep dust/grime out.
Overall for the price, I think it's pretty good.
Waiting for my Whitestone EZ glass screen protector to arrive. In the meantime, I already have a fairly deep scratch in the front glass. Ive babied this phone and have zero clue where it came from.