Related
OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?
OK, flashed twrp via odin, see pics.
brisk5181 said:
OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?
Click to expand...
Click to collapse
Oh man. You're not the only one.
This happened to me yesterday. I had to flash back to stock. Now, I am about to root again. Good luck, mate.
This seems to happen with Goo everytime there's a new version of TWRP. I have read that the easiest fix is to flash the TWRP tar file with Odin. Every post I have read, said that everything was fine after that. Sounds like Goo doesn't mess with anything but the recovery in those cases. I used this fix once when I flashed a recovery zip that didn't work.
As of date. It appears Goomanager is the culprit.
I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?
tthreeoh said:
I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?
Click to expand...
Click to collapse
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Can I install 4.3 with twrp2.6.1.0 recovery?
I installed 2.6.1.0 and I still can't get past teamwin...
Soft Bricked
tthreeoh said:
I installed 2.6.1.0 and I still can't get past teamwin...
Click to expand...
Click to collapse
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse
brisk5181 said:
if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
Click to expand...
Click to collapse
I appreciate, There's so many on Amazon, how do I know which one is correct ?
VermontKindBud said:
I appreciate, There's so many on Amazon, how do I know which one is correct ?
Click to expand...
Click to collapse
any should work.
this is what I bought
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse
In case you missed it. You have to remove the battery. (it would be nice if this helps your problem)
soupysoup said:
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks man... Got me out-of hat water with the wife. .
You guys are life savers! Thank you!!!!
Jig not working either
So, as mentioned before, GooManager updated me to TWRP 2.6.3.0, and now I can't boot past samsung splash screen. No method I used would get me to download mode so I took the advice in the thread and bought a USB Jig. Even removing the battery and leaving it out for 2 minutes and then reinserting it, followed by inserting the jig in the charger port and waiting, and nothing happens. Turning the device on with the jig in the port also does nothing but a quick flash of the splash screen logo and then darkness forever. Definitely doesn't bring up download mode or any kind of yellow triangle. Anyone tell me what I'm doing wrong? You'd think that as long as I can get to the samsung logo screen that there would be some way to recover this device and that I'm no hard bricked. Other people have managed to recover from the GooManger TWRP 2.6.3.0 issue, so why can't I?
shot my USB jig came in today & can't get it into to download mode at all NO
gata love odin it saves you every time
Samsung galaxy tab3 the model number is SM-T211,When i try to go to recovery mode it just freezes at the samsung screen when I press the power button.volume up and home button and still it 's not going to recovery mode, I am trying to root the device I installed TWRP from this post http://forum.xda-developers.com/showthread.php?t=2386098, I was folling this guide http://forum.xda-developers.com/showthread.php?t=2525630,I used odin andput it on download mode it installed the twrp but now how do i root it since it's not going to recovery mode how do i fix these?
salza222 said:
Samsung galaxy tab3 the model number is SM-T211,When i try to go to recovery mode it just freezes at the samsung screen when I press the power button.volume up and home button and still it 's not going to recovery mode, I am trying to root the device I installed TWRP from this post http://forum.xda-developers.com/showthread.php?t=2386098, I was folling this guide http://forum.xda-developers.com/showthread.php?t=2525630,I used odin andput it on download mode it installed the twrp but now how do i root it since it's not going to recovery mode how do i fix these?
Click to expand...
Click to collapse
why no one replies to this?
salza222 said:
why no one replies to this?
Click to expand...
Click to collapse
To go Into recovery mode hold Home +Volumen up and Power button , when you see Samsung Logo hold only Home and Vulome up for the next around 20 sec that you See the recovery menu.
Please help me !
I have the same problem, I've took the steps to aquire recovery but nothing happens
On my 8.0 recovery is power+volume up, no home button. Don't know if that makes a difference or not.
Try downloading an app like " rebooter" from the play store. See if that will get u into it.
Also I use power/vol up to get into recovery.
Sent from my SPH-L720 using xda premium
Use the normal CWM
Sent from my SM-T211 using xda premium
I had the same problem, try this:
http://forum.xda-developers.com/showthread.php?t=2639423
Flash a recovery again. I have experenced this after i tried a wipe ， but when i flash the re again , the problem solved.
发送自我的 SM-T211 使用 Tapatalk
pengpengback said:
Flash a recovery again. I have experenced this after i tried a wipe , but when i flash the re again , the problem solved.
发送自我的 SM-T211 使用 Tapatalk
Click to expand...
Click to collapse
dude where can I get the recovery? please do share tge link ... I'm having the same problem!!
Hello,
I have a Samsung Galaxy Tab 3 Kids version (SM-T2105). It is only a Wifi tablet. I never rooted and USB debugging is not enabled (Keep this in mind). It is pure stock firmware. My 9yr old daughter has locked herself out. The Lock Screen password does not work. Because I can not gain access, I do not know exactly what firmware version it has or enable USB debugging (again - keep this in mind). The tablet will not boot to recovery mode, no matter what button combination I use. It only boots back to the Lock Screen. I tried in Regular Mode and Safe Mode. The only other mode that works is Download Mode (for Odin).
I am trying to do a Factory Reset, but I can not get into Recovery Mode. I tried flashing the stock firmware using Odin, but that does not work even after everthing PASSED with green lights (Odin 3.10.7). The tablet just reboots back to the same Lock Screen. Also, because the tablet is not enabled with USB debugging I can not do anything with ADB.
So basically I am stuck on the Lock Screen, and cant get into Recovery Mode in order to do a Factory Reset. Also, Odin flash is not working, even though everything says completed successfully. I have read in another post that other people are experiancing the same issue not being able to get into Recovery Mode (even when the tablet is not locked out and working fine). See this link:
http://forum.xda-developers.com/galaxy-tab-3/help/samsung-galaxy-tab-3-7-kids-t2105-t-t3294954
Can anyone help me. I beleive the tablet is stock in a soft brick that doesn't allow access to Recovery Mode. And the Locked Screen password is preventing me from getting into the table OS.
Any help would be greatly appreciated. And my 9yr old daughter will be happy again...
Thanks,
ggee
Hello,
I'm not sure which one of these did the trick for me, but I was able to get into recovery mode. I'm not sure if your three tables are rooted or not, but I don't think it matters. Try these two methods:
Method #1:
Technically, I think I just stumbled on to this one after successfully completing Method #2 (below). But it's worth trying it first before moving on to Method #2.
-Hold the Home + Volume Up + Power buttons together at the same time (just like the normal process).
-Now, you will probably need to try this next step a couple of time before you get it right. This is because it happens pretty fast and you need to time it perfectly.
-Notice that when the screen turns on, the actual first thing that happens is that the the screen backlight turns on and glows first. This happens first and a split second later the first Samsung logo flashes.
-You need to let go of all three buttons at the same time as soon as you see the backlight turn on, but before the Samsung logo flashes.
This is the sweet spot, and it happens pretty fast. But once you do it at the right time, the tablet will go black again and then the recovey mode will show up. It works for me every time.
Method #2:
I thought somehow the recovey mode portion of the firmware had become corrupter somehow. So I decided to flash a custom recovery using Odin (since at that time I hadn't stumbled onto Method #1 yet). Make sure to download and flash the CWM or TWRP .tar file for Odin (I personally have always liked CWM over TWRP).
-Make sure you have all the correct USB drivers for the tablet installed on your computer.
-Open Odin and load the .tar file that you downloaded into the PDA or AP slot (depending on your Odin version).
-Let Odin check the m5d verification for successful authorization.
-Once Odin is ready, then boot the tablet into Download Mode (Home + Volume Down + Power button)
-Connect the table to a USB cable that is attached to your computer's main USB port.
-Odin should now recognize that the table it connected to a valid COM port.
-Click <Start> button on Odin and it should flash the costum recovey .tar file pretty quickly.
-The tablet will simultaneously flash a progress bar and start to automatically reboot (also pretty quickly).
-Disconnect the tablet from the USB cable now.
If the tablet does not automatically reboot to the new custom recovery screen, then just power off the tablet completely. Wait 30 seconds, and then boot the table to recovery mode use the Method #1 shown above. You should now be able to go into the new custom recovery mode you flashed with Odin (CMW or TWRP). It should all work now.
From this point you can download and install SuperSU to add root (if you want to).
Let me know if this works for you.
ggee
Worked great thanks
galaxy tab 3 model GT-P5210 rebooting cant enter recovery mode what can i do i reinstall software it doese the same things need to fix it
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
same prob
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
Same problem as OP, and I can not get into download mode either. If I do as above, it still goes on booting .
saeidzzz said:
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Click to expand...
Click to collapse
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
you are a life saver!
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
I thought I was going to have to factory reset my phone like other forums suggested and lose everything. Thanks to your suggestion I was able to get out of recovery reboot loop. Thank you!
Thanks for your help, you are a lifesaver lol! I saved so much money and time because of you. Have a great day
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
But how to enter recovery it still says set warranty bit recovery
i am facing problem with set warranty bit: recovery in samsung J5 model...
samsung j5 500f
i have the same problem when i flash twrp recovery..any solution ????
Ghats normal
Sent from my SM-N900T using XDA-Developers mobile app
My Fix
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
ulop3z said:
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
Click to expand...
Click to collapse
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Tmobilefan906 said:
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Click to expand...
Click to collapse
The phone is fine now, it was just stuck on the loop and spamming home was the only way out, its fine now I've had no problems and it boots up fine
This happens...
This happens to almost everyone at some point of time. There is no need to worry as you just need to flash recovery like TWRP or CWM. To shed some light on this issue... boot loops mainly happen when you uses the incorrect version of software with your ROM or stock firmware. By using youtube you can look at the videos of your phone model and find the recovery version number needed.
For anyone who has a Note 3 T-Mobile phone who is still stuck! I am willing to make a video to show how to fix this and provide all the firmware/version numbers + links in one bundled location to make it easier.
ALL PHONES ARE VERY specific... ONLY USE THE CORRECT FIRMWARE FOR YOUR MODEL PHONE
Again, if you have a Samsung Note 3 T-Mobile, model number SM-N900T and are still lost. Let me know so I can shot a video and bundle files needed.
---------- Post added at 08:44 AM ---------- Previous post was at 08:38 AM ----------
cdresor said:
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
Click to expand...
Click to collapse
Don't be scared by this... just choose the correct versions before blindly trying to install a ROM. Also, only use links from main sources if you dont fell like auditing the code!
Hi guys, sorry for might be late about helping you now years later... But recently I've found something interesting about fixing this issue.
*****
Fix: (100% working in Galaxy Grand Prime SM-G530H)
UPDATED: More detailed info!
# Before flashed Recovery or Root:
1. Root device using Odin or any other rooting known workaround.
2. Backup Recovery (optional), and Kernel using Rashr (available on PlayStore).
3. Flash Custom Recovery (TWRP), using Odin PC software or TWRP android app.
4. Flash backed-up Kernel.img file to Boot partition using TWRP install section.
5. Reboot system (It may take a few time to boot)
# After flashed Recovery or Root: (accidentally or without knowing)
1. Search online and download your exact Phone Stock Kernel.
2. Follow *before flashed* above ↑ from 3rd.
Bonus info:
Even after flashing TWRP, you might be able to Boot device yet, by going to TWRP → Advanced → Reboot system. (It bypass bootlooping to Recovery, while: “Set Warranty Bit : Recovery”).
That's all! Try at your own, then share it!
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app
I cannot. I have the battery of the phone out right now. As soon as i put the battery in the phone, it tries to reboot into recovery without me even pressing the power button. Then it again shuts off and tries to restart every 2-3 seconds.
Lawful123 said:
Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just some additional info, I flashed CWM recovery through Rom Manager. After flashing it, it asked to reboot the phone. As soon as the phone rebooted, i started having this issue.
I'm in a similar situation. I used to be able to use the phone controls (power-home-Vol Up) to be able to go into recovery mode, but even that has stopped functioning. The only way to get the phone to boot normally after that is to pull battery, put the phone in download mode and then cancel download mode to boot up normally.
re: download mode
hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I think the only way to get your phone into download mode now would be
to get a USB Jig from eBay or some online store.
They are under $5 bucks shipped.
Once you have that you would simply remove the battery from your
phone and then plug in the Jig before putting the battery back in.
The usb Jig is basically meant to be used for those
phones which will not go into download mode any
other way.
I have a Jig and as soon as it's plugged into the phone when the phone
is powered down it goes into download mode within 2-3 seconds.
Soon as its in download mode you can remove the jig and start a
clean Odin flash of the official stock firmware for your phone.
Good luck!
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
Thanks for that USB Jig suggestion. I guess that is my last hope.
Sent from my SM-N900T using XDA Premium 4 mobile app
Per suggestion from Misterjunky, I've now been successful in installing the Stock Tmobile 4.4.2 NB4 formware that I downloaded from sammobile. I used Odin 1.85 to install that on the Note 3. So far, the phone looks functional again.
So pressing power, vol down and menu doesn't get you into download? Have you tried holding them for at least 30 seconds?
I had this happen to me when I messed up flashing twrp. Pull the battery for 30 minutes, then put the battery in while holding power home and vol down.
That's what worked for me.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
I encountered the same issue after flashing CWM Touch to my SM-N900T (Note3-Aus) running Infamous Rom on the BioShock kernel. After being stuck in the loop for a fair while I removed the battery, went to grab a cup of tea before completely raging at the phone, went back and put the battery back in. The phone did not boot automatically this time, a good sign I thought to myself. I then went on to hold down VolumeDown + Home + Power to see if I could get into download mode. I successfully booted into download mode and selected the reboot option. My Note3 then went on to boot successfully. Hopefully this helps :fingers-crossed:
I recently had the same issue......heres step by step:
1. with the battery OUT, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. open kies. and at this point you'd want to restore back sto stock as follows:
4. go to tools, firmware upgrade and intialisation
5. follow the on screen direction and then just wait.
6. if you want to re root, then feel free to once the phone is up and running.
i have tried this method so many times and hasnt failed me yet. IF this has helped anyone, please press the thank you button! :laugh::fingers-crossed:
I resolved the problem by flashing the phone back to T-mobile stock using Odin. In my case, the recovery was corrupted and hence the issue. After flashing back to stock, I was then able to root and install a TWRP recovery successfully.
hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I'm having the same problem, what I do is take out the battery put it back in and try to turn on the phone on recovery mode, and it will give me the option to restart the phone. Hope it works
Same problem has happened to me, do you guys know if the jigs are universal? The ones I see on amazon and ebay dont list the note 3 at all so I just want to be safe. Since upgrading to nf9 the recoveries have given me major issues, TWRP was really buggy so I switched back to CWM and this happens.
Scratch that, just rebooted. I would still like to know if its universal though, in case this happens again. Doesnt hurt to be prepared
You're a life saver, Thanks a ton
atlzonly89 said:
i recently had the same issue......heres step by step:
1. With the battery out, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. Open kies. And at this point you'd want to restore back sto stock as follows:
4. Go to tools, firmware upgrade and intialisation
5. Follow the on screen direction and then just wait.
6. If you want to re root, then feel free to once the phone is up and running.
I have tried this method so many times and hasnt failed me yet. If this has helped anyone, please press the thank you button! :laugh::fingers-crossed:
Click to expand...
Click to collapse
you're awesome, thank you so much
Note 3 (sm-n900w8) will not go into recovery mode after CWM Flash
Helllo Sorry if this is not in the proper place I have not had much experience posting.
my Phone is a Note 3 (sm-n900w8) Canada (rogers)
running Lollipop 5.0
base version n900w8vlu2doc4
kernel 3.4.0-4348112
[email protected]#1
build number ..... lrx21v.n900w8vlu2doc4
ap: n900w8vlu2doc4
I Flashed CF Auto root first (CF-Auto-Root-hltecan-hlteub-smn900w8.tar) All went well and I got root access
Then I Flashed CWM ( n900-cwm-recovery-6.0.5.0-kk_L5.0(0812)) and all seemed to go well but .. I could not get into
recovery mode. when I pressed vol up + Home + power key at the same time it went directly to download modes second screen..( the one that is ready for you to hit start on odin.) ...
I was able to reboot and try several times with the same result.
I then went and got the CWM app and tried to enter form there to only get stuck on the download mode without being able to reset.
then I flashed the CWM again and was back to being able to reset but not being able to get into recovery mode.
I updated CWM recovery setup from the app to the latest 6.0.4. and then tried to back up my current rom ... this let to a boot loop that said something like ..... Kernel is not seandroid enforcing...
once again I was able to get into download mode and had to re flash CWM and get back to my original problem ... not being able to get into download mode
Can anyone help me figure this out
Thanks
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Hm, I had this 2 month ago with a S4...
Same thing, I go to my provider he checked the Handy and said I have a defect on my Mainboard... He use dos tools for Handy analysis... I flash stock with Odin, too... Success but no boot...
CarHDRom V.27.3 by Carotix S6edge
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Docmjldds said:
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Click to expand...
Click to collapse
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
nyknight77 said:
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
Click to expand...
Click to collapse
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
Really appreciate your help here. Would flashing TWRP with odin trip knox? I'm afraid to flash anything not stock rom related.
Docmjldds said:
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
Click to expand...
Click to collapse
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
PS: Have you tried turning phone off. Then power on and then immediately hold the vol up home pwr buttons combo. That should also get you into recovery mode. But that said, I would still try my last.
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
He wants to keep stock. NOT a good idea
Docmjldds said:
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
Click to expand...
Click to collapse
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
nyknight77 said:
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
Click to expand...
Click to collapse
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
maxter55 said:
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
Click to expand...
Click to collapse
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
nyknight77 said:
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
Click to expand...
Click to collapse
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Docmjldds said:
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Click to expand...
Click to collapse
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think i would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
nyknight77 said:
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think I would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
Click to expand...
Click to collapse
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Docmjldds said:
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Click to expand...
Click to collapse
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
The only thing I can think of is that your setup is so corrupted you basically have no choice here. It's kind of the old adage about knowing it's important to occasionally back up the internal data, but just never get to it. I'm kind of paranoid to every now and then make sure I have copies of stuff around. I know it's zero solace for you, but without getting into recovery mode, there is no way to get to the Internal stuff that I know of. I'm assuming you never used smartswitch to backup or just use a computer to copy paste Internal stuff to a folder for saving.
HMMMM...Password:
ZiDroid.com
Try this stock Recovery. I found a post I made almost two years ago with a link to this file. Use the password to open the file and try ODIN again
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Docmjldds said:
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Click to expand...
Click to collapse
Really appreciate your help. I'm starting to think more that it's a bad battery now. Hope that's just it instead of the main board.
I left phone on charge for a few hours (constantly boot looping the whole time). I'm able to power off the phone by holding Power button and Volume down for 10 seconds. Screen is completely off, no boot looping.
Step1: When try to simply turn phone on by holding power button for three seconds, the first samsung galaxy s6 edge logo screen pops up but then goes away and phone looks to be off. Like it's trying to get power from the battery but can't.
Step2: If I keep holding the power button, that first logo screen would turn on and off as if it's a boot loop. If I let go, then phone is off again.
Step3: If I go into download mode and select Cancel (restart phone), it goes into boot loop with only first logo screen again. It loops until I hard reset by holding power button and volume down again for 10 seconds. Then phone is off. Same thing repeats if I go back to Step1 again.