Hello all.
I know this has been asked a gazillion of times, but the solutions I can find, are not working for me.
I rooted my phones yesterday, for the first time and all went great. I got reverse tether to work etc etc.
I installed a few apps, and they all worked.
Then i installed Xposed framework, and it got me into a bootloop.
I tried flashing the recovery_original_flashable.img from another thread and this went perfect, but it still is in the bootloop. I can get into recovery, but it does nothing. It just lets me wipe cache and or do a factory reset and those both have no effect whatsoever.
I know I might be doing something wrong, can anyone help me?
And sorry if I am just forgetting one step in all of this.
Thanks in advance
pmbMixx
EDIT:
I got the stock rom ready, yet, I cannot exit my SD card to copy the update.app file. This is due to a drop a year back, it is bend at the sd card slot and when I use a little needle to make it come up it tries to push the whole sidepanel off, I tried connecting to fastboot and using ADB push command to drop the file there, but it does not see my device.
How to move on?
pmbMixx said:
Hello all.
I know this has been asked a gazillion of times, but the solutions I can find, are not working for me.
I rooted my phones yesterday, for the first time and all went great. I got reverse tether to work etc etc.
I installed a few apps, and they all worked.
Then i installed Xposed framework, and it got me into a bootloop.
I tried flashing the recovery_original_flashable.img from another thread and this went perfect, but it still is in the bootloop. I can get into recovery, but it does nothing. It just lets me wipe cache and or do a factory reset and those both have no effect whatsoever.
I know I might be doing something wrong, can anyone help me?
And sorry if I am just forgetting one step in all of this.
Thanks in advance
pmbMixx
EDIT:
I got the stock rom ready, yet, I cannot exit my SD card to copy the update.app file. This is due to a drop a year back, it is bend at the sd card slot and when I use a little needle to make it come up it tries to push the whole sidepanel off, I tried connecting to fastboot and using ADB push command to drop the file there, but it does not see my device.
How to move on?
Click to expand...
Click to collapse
Since you cant remove the sdcard and you are on stock recovery i would first suggest that you flash twrp recovery in order to get to the sdcard. Once you can boot to twrp you can mount the storage on your computer and from there copy the update.app file you need to install a fresh copy of the system. When thats done you can flash back the stock recovery and update normaly.
tileeq said:
Since you cant remove the sdcard and you are on stock recovery i would first suggest that you flash twrp recovery in order to get to the sdcard. Once you can boot to twrp you can mount the storage on your computer and from there copy the update.app file you need to install a fresh copy of the system. When thats done you can flash back the stock recovery and update normaly.
Click to expand...
Click to collapse
Thank you, I will try this and let you know how it worked out!
pmbMixx said:
Thank you, I will try this and let you know how it worked out!
Click to expand...
Click to collapse
Got it on there now,
Flashed the stock recovery back
Reboot into recovery->Error -> E:failed to mount.
What now? Thanks for the help in advance!
Edit:
Ok, I have gotten it to mount at least one time, but it will not run the UPDATE.APP, not with booting with VOL - and + pressed, not with VOL+ pressed nor with VOL - pressed.
I can enter the SD card, but after going in into the folders and going back it disconnects the SD card and it is failed to mount again.
pmbMixx said:
Got it on there now,
Flashed the stock recovery back
Reboot into recovery->Error -> E:failed to mount.
What now? Thanks for the help in advance!
Edit:
Ok, I have gotten it to mount at least one time, but it will not run the UPDATE.APP, not with booting with VOL - and + pressed, not with VOL+ pressed nor with VOL - pressed.
I can enter the SD card, but after going in into the folders and going back it disconnects the SD card and it is failed to mount again.
Click to expand...
Click to collapse
So you are on the stock recovery with the update.app file place in a dload folder in your sdcard and it cant start the update process?
tileeq said:
So you are on the stock recovery with the update.app file place in a dload folder in your sdcard and it cant start the update process?
Click to expand...
Click to collapse
Correct.
I went on trying some things, and it would not update back to the stock rom. I tried flashing TWDR (right?) and that worked, and after that I tried flasing the Cyanogen mod rom, and its working again. Although I must say, its buggy as frack.
for example: Camera wont show, it opens app but then keeps showing homescreen with a gray overlay, and when pressing the power button, it wont ever show me a menu to restart or shutdown etc.
Anyone using a rom on the P6 that does not have this problem?
Summary: I can flash custom roms, I cant flash stock roms for some reason...
Related
Hi guys, I've had my Desire rooted for around 2 months and have used loads of
ROMs/Mods etc. It's fair to say I know the procedure. At the moment though I'm
puzzled and worried because I have lost my previous ROM and can't get a new one
on!
I was flashing a new version of Pinky Desire over the previous one (without wiping)
and it never got to the reboot screen. So I took out the battery and put it back in
to reboot it. It got to the custom boot screen and no further so I then booted into
recovery and wiped data and cache and re-flashed the ROM, but the result was
the same...
So I tried this a couple more times until suddenly the recovery-windows.bat file
would no longer put me into a recovery menu. I've tried everything I can think of
(using my original Goldcard etc) but nothing is fixing it- it's like I've lost root access.
How can I make my phone useable again? PLEASE HELP!!!
EDIT: In case it makes a difference I did delete what I thought were some old .zips from my SD shortly before this.
Install an official RUU, then re-root it? I guess some of the pro's got some better answers though
Download the ClockworkMod recovery, rename it in update.zip, put it in the sd, enter recovery, when you get the red triangle press vol up+power, select to flash update.zip.
Yep, flash an ruu, then re-root, only this time use unrEVOked and for future when flashing roms use the newer recoveries like clockworkmod or amonra.
The old recoverywindows.bat file leaves you at risk of the usb brick. You may well already have that now if you pulled the battery mid flash.
Thanks all. Haven't had a chance to do this yet but will. I did manage to flash an update.zip but it won't detect the sd. will try with clockwork mod.
DomFel said:
Download the ClockworkMod recovery, rename it in update.zip, put it in the sd, enter recovery, when you get the red triangle press vol up+power, select to flash update.zip.
Click to expand...
Click to collapse
Tried this but all I'm getting is cannot find directory. It retries about 12 times then
reboots. Just won't work.
When trying to flash an RUU it comes up with 'Error 170: USB connection error'.
This is weird because the device's bootloader recognises that there's a usb
connection. Any ideas?
EDIT: Seems like the phone in it's current state simply can't mount an sd card.
Gotta try some alternative methods for getting the RUU to run...
Doogleman said:
When trying to flash an RUU it comes up with 'Error 170: USB connection error'.
This is weird because the device's bootloader recognises that there's a usb
connection. Any ideas?
EDIT: Seems like the phone in it's current state simply can't mount an sd card.
Gotta try some alternative methods for getting the RUU to run...
Click to expand...
Click to collapse
Check out the USB brick thread.
prove said:
Check out the USB brick thread.
Click to expand...
Click to collapse
I will. That's so sh*t though
Thanks guys
Had almost same problem.
I even couldn't flash update.zip
the problem was in SD. it was working OK in windows, but phone couldn't mount it. soved problem with reformating using SDFormater, when formated with clockworkmod.
mendozinas said:
Had almost same problem.
I even couldn't flash update.zip
the problem was in SD. it was working OK in windows, but phone couldn't mount it. soved problem with reformating using SDFormater, when formated with clockworkmod.
Click to expand...
Click to collapse
I've two SDs and neither is working though so...
two things
the windows unlockerthing.bat was only supposed to be run one time, after that you could access the menu pressing vol up and power...
Why would you pull the batt on a Flash??
Pulled the battery because the device said flash completed but didn't do anything for over 5 mins. Won't make that mistake again. I've actually bricked the USB so this thread is a little pointless now
Oh and I did fix the SD issue
I tried that pyramid rom, and since it doesn't boot, I was gonna try to do virtuous, Well I put that image to update the radio, and forgot that I can't get into android to take the image off, and when I need to go into recovery, it tries reading the image, and when I say no to update again, it wants to reboot. How does one get around this?
EDIT: had a smart idea and removed the SD card. all is good now.
Konner920 said:
I tried that pyramid rom, and since it doesn't boot, I was gonna try to do virtuous, Well I put that image to update the radio, and forgot that I can't get into android to take the image off, and when I need to go into recovery, it tries reading the image, and when I say no to update again, it wants to reboot. How does one get around this?
EDIT: had a smart idea and removed the SD card. all is good now.
Click to expand...
Click to collapse
In the future when it asks to reboot after saying no to install the image you can press down arrow key and you can go into recovery or reboot into rom
Sent from my Xoom using xda premium
or in the future...turn off your phone, plug into usb on computer, run command line (assuming you have adb) and just type "adb reboot recovery".
it works even when the phone is off...
If I am understanding you right you have the PG32IMG.zip for the Radio update on the root of your SD card now you cant get into recovery cause it wants to update your radio every time you start the boot loader (Power + Vol dwn)?
am I right?
The way I work around this is to pull the SD card while the boot loader checks for update files.
once you have the ability to go into recovery (You can select recovery) push your SD back in and start recovery!
Then when you get the chance via USB Mass storage or with a file explorer on your DInc2 erase the PG32IMG.zip so you don't have this problem again.
If I helped take a second to thank me!?
Edit: DOH!
AZKJS said:
If I am understanding you right you have the PG32IMG.zip for the Radio update on the root of your SD card now you cant get into recovery cause it wants to update your radio every time you start the boot loader (Power + Vol dwn)?
am I right?
The way I work around this is to pull the SD card while the boot loader checks for update files.
once you have the ability to go into recovery (You can select recovery) push your SD back in and start recovery!
Then when you get the chance via USB Mass storage or with a file explorer on your DInc2 erase the PG32IMG.zip so you don't have this problem again.
If I helped take a second to thank me!?
Edit: DOH!
Click to expand...
Click to collapse
.
I think you dont have to erase the PG32IMG.zip just rename to pPG32IMG and if you need to use that in the future just remove the first p and you are good to go.
please help my phone doesn't want to go pass the recovery i try to do a recovery but it tells me that can't mount sdcard and after that goes black and giving me a five or six vibrations anyone knows any knows any fix please Any help would be greatly appreciated. Thanks from a Noob
Are you able to get access to the bootloader? I'm unsure of where you're problem is. Please outline your steps and where it's failing.
yes am able to get to bootloader but when i get to select zip file to install bam there it goes E:/ can't mount sdcard that's as far as it goes and if i get it to restart i get a black screen with 6 vibrations and a blinking green light. any idea???
well you're trying to install something from the bootloader and we need to get to recovery. Bootloader will try to install whatever is labeled pc36img.zip on the root of your sd card. This can contain installs for radios, recoveries (clockwork/amen ra), splash screens and maybe some other things. If you have a recovery installed you should be able to NOT install form the sd card when you are in bootloader and then load recovery where you would flash your new ROM. If you don't have a bootloader installed, You will need to download one (do a search for Amen Ra or clockwork), rename the install zip to pc36img.zip, move it to the root of your sd card and then in the bootloader when it ask you if you want to install, then you can hit yes. Once the recovery is installed, then you need to load recovery flash everything but your sd card and install a new ROM.
Hope this helps
If you don't have option to go to recovery from bootloader, then you need to put a recovery in PC36IMG form on root of SD card. Then power on by volume down and power button. Bootloader should find and install your recovery.
On another note. Over last 2 yrs, I've seen many people lose recovery, get the 5 vibrates, and never be able to recover from it despite valiant effort. Hopefully this is not your case.
Sent from my PC36100 using xda premium
well i don't know what i did but i was able to install a recovery but after like a min the phone freezes then shut down following the vibrations..
ghostnj said:
well i don't know what i did but i was able to install a recovery but after like a min the phone freezes then shut down following the vibrations..
Click to expand...
Click to collapse
You need to start over,bro.Go here.... http://forum.xda-developers.com/showthread.php?t=1339654 download it to your desktop,Then go here.... http://forum.xda-developers.com/showthread.php?t=1158993 and follow the instructions,then you should be golden,i asure you wont have this problem again.
thank you guys i got a ruu i reflased and now works thanks for your help
the phone works i can make calls now but the one problem still
E: Can't mount /dev/block/mmcblk0p1
ghostnj said:
the phone works i can make calls now but the one problem still
E: Can't mount /dev/block/mmcblk0p1
Click to expand...
Click to collapse
Did you totally wipe your sd card and partition?Also go to advanced in your recovery and fix permissions.
Diablo67 said:
Did you totally wipe your sd card and partition?Also go to advanced in your recovery and fix permissions.
Click to expand...
Click to collapse
What they need to do is basically reformat the sd card completely, then repartition [if they are].
yeah i did that and i just find out that the phone is not charging if I plug it into an outlet or to the computer ????? I been looking everywhere for a ruu rooted for my evo but with no luck by any chance do you guys know where can i get one that's the only way for now that i can flash a rom my phone is S-OFF but the rom is not rooted i don't know what to do
Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
The error I get first it gives me some sort of error which disappears once the Android system recovery menu comes up. then the only thing I'm able to see says:
Checking Module MD5RSA.. OK
Checking Module CRC.... OK
Checking Module CURVER.... OK
Checking Module VERLIST....
Huawei SD card update fail.....
cust copying files...
copy cust files successed!
===================
FAIL
===================
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
And as I said on the tittle, I will pay whoever helps me to solve this issue, I need a step by step (with a good explanation if possible) on how to fix it, I will pay $60 via paypal to the person that provides me with the solution.
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!
Ok, first of all, your picture shows that you already have the KitKat recovery.
Which version of B510 have you downloaded? Is it the update.zip? I'm assuming it is...
Please download the complete update package from here: http://www.huaweidevice.ro/user/con...001C00B510_Firmware_Android 4-4_EMUI--2-3.zip
That is the official, and full firmware update from Huawei Romania.
Once your download has completed, unzip the zip file, and copy the dload folder onto your sd card.
BEFORE placing your sd card back in your phone, try the 3 button method again. You should get into recovery mode, then do a data/factory reset, and clear cache.
Once that is done, put your sd card back in your phone, reboot your device, and reboot using the 3 button method.
Hopefully this will work.
If it fails again, you need to try formatting your sd card, and do the steps above again, without doing a factory reset.
Dear op.... Did you solve your problem? How?
miz_pimp said:
Ok, first of all, your picture shows that you already have the KitKat recovery.
Which version of B510 have you downloaded? Is it the update.zip? I'm assuming it is...
Please download the complete update package from here: http://www.huaweidevice.ro/user/con...001C00B510_Firmware_Android 4-4_EMUI--2-3.zip
That is the official, and full firmware update from Huawei Romania.
Once your download has completed, unzip the zip file, and copy the dload folder onto your sd card.
BEFORE placing your sd card back in your phone, try the 3 button method again. You should get into recovery mode, then do a data/factory reset, and clear cache.
Once that is done, put your sd card back in your phone, reboot your device, and reboot using the 3 button method.
Hopefully this will work.
If it fails again, you need to try formatting your sd card, and do the steps above again, without doing a factory reset.
Click to expand...
Click to collapse
I tried it but it's still not working. :/
blackrose1 said:
Dear op.... Did you solve your problem? How?
Click to expand...
Click to collapse
I"m still looking for a solution, actually it's been so long that I'm offering to pay whoever provides me with the solution
Try what I did here to solve a similar problem that I had: http://forum.xda-developers.com/showpost.php?p=54124890&postcount=18
sko4a said:
Try what I did here to solve a similar problem that I had: http://forum.xda-developers.com/showpost.php?p=54124890&postcount=18
Click to expand...
Click to collapse
I have a question, how can I install TWRP if the adb fastboot is not recognizing my phone? I think it's because I'm missing the drivers but I haven't been able to find them.
DanRioja said:
I have a question, how can I install TWRP if the adb fastboot is not recognizing my phone? I think it's because I'm missing the drivers but I haven't been able to find them.
Click to expand...
Click to collapse
Don't you just need Hisuite, the driver who comes with the phone when you plug in your USB cable? That made asb fastboot to recognize my phone at least.
You don't need ADB, only fastboot. Shut down the phone. Then hold the Vol- button and plug in the usb cable. Release the button after the you see the AscendP6 logo - now you are in fastboot and can flash TWRP. Windows Update should install the drivers (I've never installed HiSuite), just let it search online.
First delete your sd card to FAT32 not NTFS and put update.app to dload folder. then dowbload: http://forum.xda-developers.com/showthread.php?t=2765202
Power up your phone with volume down. and use Huawei tool kit from that link. select KitKat , unlock bootleder first from dropdown menu, then install stock recovery.
And try to update from stock recovery "3 buttons method"
ADHDDHDA said:
First delete your sd card to FAT32 not NTFS and put update.app to dload folder. then dowbload: http://forum.xda-developers.com/showthread.php?t=2765202
Power up your phone with volume down. and use Huawei tool kit from that link. select KitKat , unlock bootleder first from dropdown menu, then install stock recovery.
And try to update from stock recovery "3 buttons method"
Click to expand...
Click to collapse
Hey so far this is the most promising option I've gotten, the only problem is when I go to unlock bootloader it's giving me an error that says "error phone not connected" I've tried getting the drivers from many different ways, one from the hi suite, another letting windows look for it, the other one was I downloaded a .exe named "driver tools" but it doesn't work either, when I connect the phone it does make the sound just as when you connect any device on USB but other than that it doesn't recognizes it on the huawei toolkit. Any ideas?
sko4a said:
You don't need ADB, only fastboot. Shut down the phone. Then hold the Vol- button and plug in the usb cable. Release the button after the you see the AscendP6 logo - now you are in fastboot and can flash TWRP. Windows Update should install the drivers (I've never installed HiSuite), just let it search online.
Click to expand...
Click to collapse
I only get to see this screen: http://s3.amazonaws.com/f01.justanswer.com/JACUSTOMERd2wl5hbc/2013-01-26_122110_huawei.jpg
Tungieee said:
Don't you just need Hisuite, the driver who comes with the phone when you plug in your USB cable? That made asb fastboot to recognize my phone at least.
Click to expand...
Click to collapse
I've tried with the hi suite, downloading a .exe driver named "driver tools" and having windows look for the driver, but it doesn't recognizes it, I mean when I connect the phone it does make the sound when you're connecting something but other than that the adb is not recognizing the phone.
I had a similar problem but for me it would say verlist fail. However you should try this anyway if you haven't already: http://forum.xda-developers.com/showpost.php?p=52744051&postcount=23
What is important is that you use the recovery in that specific post. That's what fixed it for me.
blacklord9 said:
I had a similar problem but for me it would say verlist fail. However you should try this anyway if you haven't already: http://forum.xda-developers.com/showpost.php?p=52744051&postcount=23
What is important is that you use the recovery in that specific post. That's what fixed it for me.
Click to expand...
Click to collapse
I have a question, how can I flash the stock recovery? I mean I have tried with the adb fastboot but it doesn't recognizes the phone :/
Try this methode, it defently works!!! I had EXACT the same problem! P.s. You dont need to flash a other recovery!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=2781977
After a update for better compatibility for 3rd party app, my Zenfone wont get past the ASUS screen at all.
Im also stuck at the asus load screen. I played around with the permissions of the sd card, after rebooting its stuck. Guys how to unbrick?
bratski said:
Im also stuck at the asus load screen. I played around with the permissions of the sd card, after rebooting its stuck. Guys how to unbrick?
Click to expand...
Click to collapse
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
jerk48 said:
After a update for better compatibility for 3rd party app, my Zenfone wont get past the ASUS screen at all.
Click to expand...
Click to collapse
by asus screen, did you mean the ASUS Setup Wizard?
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
my problem right now is my pc wont detect my phone. Ive already installed the drivers.
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
downshift00 said:
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
Click to expand...
Click to collapse
where do i get the stock image?
bratski said:
where do i get the stock image?
Click to expand...
Click to collapse
here is the stock firmware.
https://www.asus.com/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
its fine if your phone does not talk to your PC now. copy the firmware to your SD card via other means. [card reader etc]
then try my method of flashing it back to original state, you stated that adb dont work, have you tried the temp CWM method yet?
the main goal is to wipe dalvik cache under advanced menu in CWM, and cache partition and all hard reset.
then you flash back your original file.
hope it works for you.
sooty84 said:
here is the stock firmware.
https://www.asus.com/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
its fine if your phone does not talk to your PC now. copy the firmware to your SD card via other means. [card reader etc]
then try my method of flashing it back to original state, you stated that adb dont work, have you tried the temp CWM method yet?
the main goal is to wipe dalvik cache under advanced menu in CWM, and cache partition and all hard reset.
then you flash back your original file.
hope it works for you.
Click to expand...
Click to collapse
ive read about the temp cmw method and i cant figure out how to go about it. it says on the instruction that you need to turn on phone before running the cai_dat_CWM. how am i going to do this as my phone will only boot to the asus logo? thanks
just figured it out. I need to boot in fastboot so the phone will get recognized. However, the latest build available on the asus website is still 2.17.40.12. I already have the 2.18.40.12 version. The 2.17 firmware can't overwrite the newer build in temp CWM recovery. Anybody knows where i can download the full rom? Z00A-WW-2.18.40.12?
bratski said:
just figured it out. I need to boot in fastboot so the phone will get recognized. However, the latest build available on the asus website is still 2.17.40.12. I already have the 2.18.40.12 version. The 2.17 firmware can't overwrite the newer build in temp CWM recovery. Anybody knows where i can download the full rom? Z00A-WW-2.18.40.12?
Click to expand...
Click to collapse
I GOT THE SAME PROBLEM.
dunno what to do anymore.
sigh...
help me please
Ninjakura said:
I GOT THE SAME PROBLEM.
dunno what to do anymore.
sigh...
help me please
Click to expand...
Click to collapse
here is the link for stock but pre-rooted img for latest 2.18.40.12 firmware,,make sure to download Z00A firmware if you have ZE551ML device.. and if I was not mistaken, you may choose to FULL UNROOT in SuperSU apps to go back to stock rom..
cangcan said:
here is the link for stock but pre-rooted img for latest 2.18.40.12 firmware,,make sure to download Z00A firmware if you have ZE551ML device.. and if I was not mistaken, you may choose to FULL UNROOT in SuperSU apps to go back to stock rom..
Click to expand...
Click to collapse
thanks. problem solved after i followed instructions from this thread, http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
bratski said:
my problem right now is my pc wont detect my phone. Ive already installed the drivers.
Click to expand...
Click to collapse
me too, any idea on how to fix it?
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
I have same prolem as OP's got.
I've got stuck on Asus Loading screen after install OTA update on rooted device.
I'm gonna try your method.
Thanks
downshift00 said:
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
Click to expand...
Click to collapse
how did u do that? can u give me step by step instruction please?
ty
Did anyone able to fix this problem (stuck at Asus logo and not able to get to recovery mode or connect to the computer)? Thanks!
SAN_MARINO said:
Did anyone able to fix this problem (stuck at Asus logo and not able to get to recovery mode or connect to the computer)? Thanks!
Click to expand...
Click to collapse
Press Power+Volume Up key, After vibration leave Power Button then choose Recovery Mode using Volume keys, if sleeping Android screen appear at Recovery with Error message, Press Volume Up and Power and leave immediately Power Key, it will show you the Recovery Menu, then Reset your device, it will solve your problem.
If I am helped you, Press Thanks button.
k576 said:
Press Power+Volume Up key, After vibration leave Power Button then choose Recovery Mode using Volume keys, if sleeping Android screen appear at Recovery with Error message, Press Volume Up and Power and leave immediately Power Key, it will show you the Recovery Menu, then Reset your device, it will solve your problem.
If I am helped you, Press Thanks button.
Click to expand...
Click to collapse
Thanks!
I already tried it like 20 or more times. The ASUS logo still shown for like 10 seconds and died and came back again (ASUS logo). When I tried to connect it with my laptop, the computer won't recognize the device.
SAN_MARINO said:
Thanks!
I already tried it like 20 or more times. The ASUS logo still shown for like 10 seconds and died and came back again (ASUS logo). When I tried to connect it with my laptop, the computer won't recognize the device.
Click to expand...
Click to collapse
I will try to tell you step by step:
1. Press Power Button + Volume Button
You enter into Recovery Fastboot Option, then Choose Recovery menu using Volume Key (3 Option mostly shown)
then press Power Button (From Recovery Mode), it restart.
2. Then after Restart it shows you (Mostly) Sleeping Android Screen with Error text, then Press First Volume Up Button, and Press Power Button (Power button for a second or two then leave it, IF YOU PRESS MORE TIME, IT WILL RESTART THE PHONE).
3. You can now see the Recovery Menu with Normally appear in other phones also - Reset, Restart, Etc Option.
Hope you will now able to reset your phone...
----------------------------------------------------------
PRESS THANKS BUTTON IF I AM HELPED YOU
----------------------------------------------------------