[Q] Galaxy Note 2 soft bricked , want to bring it back to life , please help .. - Galaxy Note II Q&A, Help & Troubleshooting

Hello All,
I have this samsung galaxy note 2 locked with telus canada. Right now its stuck on samsung logo screen.
1) I have tried factory reset but i cannot enter that menu , its just keep on coming back to samsung logo.
I have tried to put it in download mode and tried stock rom with ODIN but it shows failed after few seconds
2) i have tried to install TWRP on it and tried to wipe thru that but same problem, right now its showing no OS installed in it
3) I tried to bring it to stock after putting stock rom in a SD card and tried it access SD card from TWRP but its not recognizing SD card, I have tried to replace sim card+ sd card tray on motherboard just to rule out if there is any hardware issue
4) I have tried to mount SD card thru TWRP but its keep on coming back with lots of error messages ( picture attached)
5) tried advanced wipe in TWRP but lot of error messages again ( picture attached)
I am trying to find a rescue firmware or emergency firmware for samsung galaxy note 2 i317M , if any body know a reliable link please let me know or any other advice will be appreciated .
if you need any other information from my side please let me know
Thanks in advance

What is the model of the note 2 as that may help others in finding a solution to the problems that you are facing with your note 2

Same problem happened to me after 2/3 days after mounting the "rom DN4". Now I connect it to my computer and is easily recognized by Odin but I try to install the original firmware, the process is successful but in reality nothing happens. As if it would record more changes !!!! I hope we can help !! I include photos of recovery !!!!

Model number for note 2 is SGH-i317M , sorry i forgot to mention that in my post, and it came with Telus , Canada

Brownpanda said:
Model number for note 2 is SGH-i317M , sorry i forgot to mention that in my post, and it came with Telus , Canada
Click to expand...
Click to collapse
Hello ,
I thing the best should be :
Download the original rom from SamMobile.
Install it with odin PC
Root the rom
After, if you want , install a custom rom.
I hope that can help you.

It's something that I thought I'd do, but as I wrote, even if the writing process through Odin is reported as successful by both Odin that the phone itself with the advancement of the bar, actually it is not !! I tried to install both original rom 4.1 is 4.4, different bootloader and recovery original but nothing to do !! I hope you have other solutions to help us. Thanks in advance !!!

Cardone71 said:
It's something that I thought I'd do, but as I wrote, even if the writing process through Odin is reported as successful by both Odin that the phone itself with the advancement of the bar, actually it is not !! I tried to install both original rom 4.1 is 4.4, different bootloader and recovery original but nothing to do !! I hope you have other solutions to help us. Thanks in advance !!!
Click to expand...
Click to collapse
It's your rom a full wipe rom ?
Have you try with an other version of Odin ? .I had a problem with Odin PC 3.09 but it worked with Odin PC 3.07.

No, the rom was not full wipe. Unfortunately however through Ricovery wipe function does not work as per attached photos. Basically it is as if the phone would not see more memories, in fact marks 0 mb available, but this gives me hope that it's a problem of folder and fs / partitions corrupt, because removing the sd 64gb I filled in the computer works fine again! ! But how to solve it ???? I tried different versions of Odin from 3 to 3:09 !!!

Sorry cardone , no offence , please start your own thread , as you are confusing everything here , I started this thread and nobody is replying to my questions here

Ok, I'm sorry, but I thought that having the same problem or answer me or you do not change !! Anyway I open another 3d. Until next time !!

Cardone71 said:
Ok, I'm sorry, but I thought that having the same problem or answer me or you do not change !! Anyway I open another 3d. Until next time !!
Click to expand...
Click to collapse
Thanks for understanding Cardone , Please visit this thread if any of suggestion helps you

Could anybody please help me to fix this SGH-i317M note 2 locked with telus canada
Plz let me know if i can find any rescue or emergency firmware for this phone or any other suggestion ?

Brownpanda said:
Could anybody please help me to fix this SGH-i317M note 2 locked with telus canada
Plz let me know if i can find any rescue or emergency firmware for this phone or any other suggestion ?
Click to expand...
Click to collapse
Hi,
have you try to install an original Samsung rom with Odin PC ?
It's possible TWRP doesn't work well if your phone are locked =Can another user confirme that ?

Cardone71 said:
Same problem happened to me after 2/3 days after mounting the "rom DN4". Now I connect it to my computer and is easily recognized by Odin but I try to install the original firmware, the process is successful but in reality nothing happens. As if it would record more changes !!!! I hope we can help !! I include photos of recovery !!!!
Click to expand...
Click to collapse
X Brownpanda
Finally, after you've tried everything and more without solving the problem I took it in for service. They told me that if it's a software problem (that has corrupted the partition) to others happened like that, is not to cost more than € 20 .......
I hope so !!! Then you update !!

Brownpanda said:
Could anybody please help me to fix this SGH-i317M note 2 locked with telus canada
Plz let me know if i can find any rescue or emergency firmware for this phone or any other suggestion ?
Click to expand...
Click to collapse
Perhaps you can try flashing twrp recovery again to see if it picks up SD card.

Try flashing a split firmware with re partition enabled and a pit file for your particular model .
If same problem persists then it might be emmc ic problem ( a hardware issue and you need to get it replaced ).

Thanks Sachin , could you please let me know what is the difference between split firmware and stock firmware ? where can i find split firmware for this particular model ?
I am not worrying too much about bricking this phone anyways coz i have tried every other option available here and its already semi bricked now. i would really appreciate if i can make it work anyways. I posted this post almost 2 weeks ago so i guess most of other readers are out of ideas too now. so i would like to go for pit file option now. Please help me in this i have never tried this option before.
s

Brownpanda said:
Thanks Sachin , could you please let me know what is the difference between split firmware and stock firmware ? where can i find split firmware for this particular model ?
I am not worrying too much about bricking this phone anyways coz i have tried every other option available here and its already semi bricked now. i would really appreciate if i can make it work anyways. I posted this post almost 2 weeks ago so i guess most of other readers are out of ideas too now. so i would like to go for pit file option now. Please help me in this i have never tried this option before.
s
Click to expand...
Click to collapse
Split firmware means separate files for ap, cp, csc, bootloader in odin instead of single file in ap. U have to search for it. And also for pit file for your model.
Then flash it using odin with pit file also selected and re partition enabled.
If this do not solve problem. Then its emmc issue. Get it replaced.

sachinwadhwa46 said:
Split firmware means separate files for ap, cp, csc, bootloader in odin instead of single file in ap. U have to search for it. And also for pit file for your model.
Then flash it using odin with pit file also selected and re partition enabled.
If this do not solve problem. Then its emmc issue. Get it replaced.
Click to expand...
Click to collapse
Thanks for your help sachin, could you please let me know where i can find all these split files for my model its i747M canadian network locked to telus canada. I am trying to find all these files but most of the places are providing only PDA file. Please help me in this or please let me know some keywords how can i search them.

sachinwadhwa46 said:
Split firmware means separate files for ap, cp, csc, bootloader in odin instead of single file in ap. U have to search for it. And also for pit file for your model.
Then flash it using odin with pit file also selected and re partition enabled.
If this do not solve problem. Then its emmc issue. Get it replaced.
Click to expand...
Click to collapse
Any Help Sachin , Could you please help me to find separate files for this model ?

Related

black screen

i rooted my device but some games wont play like need for speed and asphalt 7 so i installd and its the last thing i did on my device (chainfire3d) then my device reboot and keep reboot wont open help please wait for answer
Sounds like this is a very similar problem to something someone else posted in the last few days. Take a look through the last couple of days posts in this forum and see if you can see it. The general suggestion if i remember right was to use ODIN to fix.
wisewood said:
Sounds like this is a very similar problem to something someone else posted in the last few days. Take a look through the last couple of days posts in this forum and see if you can see it. The general suggestion if i remember right was to use ODIN to fix.
Click to expand...
Click to collapse
can u show me the link i still searching for now and the only solution i found is change my stock ROM and i wont do that wanna get my official updates i think that's better
wanna know what to do by Odin to fix my device and in the same time keep my official system
i seen other problem got the same name but i mean my device wont open just galaxy note ii welcome screen and keep it my device wooont open any one help please what to do by odin ??????
no one answer developers forums xD
thanks will leave google helps more
Read before you install, chain fire 3d does not work with jellybean 4.1.
I think the description in the play store also said enough
Amazes me why people dont read ?
It clrearly says not for jelly bean
You need to find your desired stock rom and flash it via odin. Only solution
Why do you install things which aren't supported?
It's the first thing people should do when installing unconfirmed stuff.
Chainfire 3D isn't supported for JB.
What you need to do now is go into DOWNLOAD mode, and flash your stock ROM via Odin, if you want official.
thanks all its my mistake am new , and i said sorry for my note lmao , well now i need to search for good custom room
i download nandroid and platinum backup and i backup my apps&system wz data got .gz files i think on my sd-card and got nandroid backup on my sd-card (nandroid back up like 4 files) one of them .md5 and its 1kb others .tar 500mb and 700mb cach and system and est i think didnt remember they are on my sd-card is that help me by odin ? because i cant open my device any way my only solution by odin mode but is there any file in my back up files can help ? forget i tried to restore my device by nandroid.md5 and odin closed not response , dont say iam lucky new in android world understand nothing for now
You don't need to flash custom ROM, bro. If you want official rom, just go to sammobile.com, find the firmware of your country and flash it through odin. There, you have official stock ROM again.
Also your English is extremely hard to understand. Try to use commas and full-stops.

[Q] Samsung Galaxy Tab 3 LITE PIT file

Hey, my cousin bought a Samsung Galaxy Tab 3 LITE and he messed it up by trying to flash a wrong rom on it.
Anyways, he called me after 2 days and i think he also messed up some partitions, because the DATA is unmountable.
I think i need a PIT file to repair the damage, but i cant find it anywhere.
can anyone share it with me or create one? i dont know what to do.
My thanks for your time!
stufkeeper said:
Hey, my cousin bought a Samsung Galaxy Tab 3 LITE and he messed it up by trying to flash a wrong rom on it.
Anyways, he called me after 2 days and i think he also messed up some partitions, because the DATA is unmountable.
I think i need a PIT file to repair the damage, but i cant find it anywhere.
can anyone share it with me or create one? i dont know what to do.
My thanks for your time!
Click to expand...
Click to collapse
Does the device still power on? If so have you tried doing a Emergency Firmware Recovery with KIES?
Failing that you may be able to extract the PIT file from the device with Heimdall Frontend using Ubuntu (or other Linux Distro), not entirely sure though as if it's been completely wiped/messed up that might not even be possible at this stage.
Even then if successful, there's a chance Odin will fail to accept it.
If you wish to try, using Heimdall Frontend select the utilities tab, put the tablet in Download Mode and click "Save As..." under the Download PIT section, give it a name and save it.
Sorry I can't help further, I don't have that model, maybe someone who has it on here can help get the PIT file from their device.
Good luck :fingers-crossed:
Gilly10 said:
Good luck :fingers-crossed:
Click to expand...
Click to collapse
Thanks for the reply!
I used an different tab 3 lite to get the PIT file with heimdall, but the tablet is low on battery now, so i cant flash anything yet :silly:
it's charging now!
hope this will work! i'll post the results later
stufkeeper said:
thanks for the reply!
I used an different tab 3 lite to get the pit file with heimdall, but the tablet is low on battery now, so i cant flash anything yet :silly:
It's charging now!
Hope this will work! I'll post the results later
Click to expand...
Click to collapse
what was the outcome after flashing with the copied pit file? I too am having some issues due to partitions and could use said file....

[Q] Boot Loop/Stock firmware/I seriously need help PLEASE!!!!

Hello all *waves*
This is my very first post although I have used this site countless times. I'm just going to jump right to it because I seriously need some help!
I am trying to fix my SGH-M919 (Tmobile S4) that just suddenly stopped working one day. I have tried EVERYTHING! Kies, custom roms, Odin but my phone still will not load past the Samsung logo. It will boot into recovery (TWRP) and Download mode. I know that using Kies is the quick fix but (LUCKY ME...not) my phone is one of the few phones tmobile/Samsung sent out with no S/N on the sticker under the battery. Since I cant get into my phone I cant get the S/N and I do not have the box anymore.
I have tried using the many sgh-m919 Stock Rom files online, including this site, but nothing is working. When I spend hours downloading them and begin to use them in odin, Odin doesn't load the file for me to flash.
I know I am using Odin correctly because I have done it successfully countless times in the past. I have also tried EVERY download file out there, but I can't find a good one that I can flash in Odin. I have also tried all of the guides on this site several times so please don't redirect me to them, because I have seriously and correctly tried them all. If you have any suggestion please let me know. I can't afford the 161.00 Samsung is requiring or the 175 warranty fee tmobile is charging. PLEASE HELP.
And if some has a good copy of the Stock Rom for SGH-M919 that they would be willing to email me I would FOREVER be greatful!
also my sdcard and battery are not the issue.... tried that too
Thanks,
Nikki
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
serio22 said:
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
Click to expand...
Click to collapse
I don't know if its something I have done wrong or not. I followed all of the instructions to the letter. I think (but am not sure) that I don't have a usable copy of the Stock Firmware.
I am using v3.10 but I have tried them all.
When I click on AP in Odin, then click on the file I am sent back to Odin, but the file (and filename) doesn't appear in the AP box like normal.
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Frankenscript said:
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
The longest I have waited has been an hour, do you think that I should still wait longer?
Try different version of odin. Even if the file was bad, it would say something
Try a different pc.
Pp.

Note 7 SM-N930F bricked / / need help!

I flashed TWRP with odin.
After that I was not able to boot or start recovery.
Only download mode is possible.
In download mode it shows
warranty void 1 (0x030c)
I also cannot flash anything in odin anymore.
After initializing, it immidiatly stops with the error:
<ID:0/004> FAIL! (DeviceInfo)
Can anybody help me, how to get this beautiful phone running again?
Thanks so much!
MOD EDIT:
This member is talking about this.
TEKHD
bill340 said:
I flashed TWRP with odin.
After that I was not able to boot or start recovery.
Only download mode is possible.
In download mode it shows
warranty void 1 (0x030c)
I also cannot flash anything in odin anymore.
After initializing, it immidiatly stops with the error:
<ID:0/004> FAIL! (DeviceInfo)
Can anybody help me, how to get this beautiful phone running again?
Thanks so much!
MOD EDIT:
This member is talking about this.
TEKHD
Click to expand...
Click to collapse
try to download the firmware from http://samfirm.net/threads/official-rom-full-galaxy-note-7-sm-n930f-n930fxxu1apg7-xxv-23-07-2016.98/ and try to flash via odin.
Never ever try to flash anything till the time there is no evidence of success.
I tried that, but the problem is that I always get this error in Odin when trying to flash...
Did you check OEM unlock before you flash as per the instructions? not doing so will result in a boot loop.
Try different cable and USB port. I had trouble with both that had me running in circles.
Sent from my SM-N910T using Tapatalk
Yes, I did OEM unlock before the flash.
Different cable and USB port makes no difference...
Usually when I have issues I try to uninstall all drivers related to phones and only install the one I need. Then after a restart and forcing the phone into Odin I'm able to flash without issues.
It might be failing because of a Partition size error. Have you tried the Samfirm Tool to download a firmware from your region?
Have you tried Emergency Device Recovery from SmartSwitch PC ?
Also, I'm doubtful whether this is a new trick up from Samsung's sleeve. This Phone is still new, so it's quite a learning process. Maybe Samsung has implemented something to block these unofficial flash attempts. However I thank you taking the risk and trying the recovery first.
Can you help me, where I can get this?
Have you tried Emergency Device Recovery from SmartSwitch PC ?
bill340 said:
Can you help me, where I can get this?
Have you tried Emergency Device Recovery from SmartSwitch PC ?
Click to expand...
Click to collapse
Download and install SmartSwitch for PC. Then follow this Video.
I really have no luck here...
Any idea?
Googled already, but did not really find anything besides reinstalling...
I dont think theres a fix for this issue yet. There's also no subtantiated literature in the larger cummunity pertaining to rooting the Note 7.
I am guessing this is an additional precaution taken by Samsung therefore the rooting process needs a very specific set of steps in order to circumnavigate the systems Sammy has put in place. The thread itself says WIP, so I applaud you for your courage.
Nonetheless my suggestion is to instead of waiting for an answer which no one can provide, go to Sammy and bull**** to them that u plugged in the computer and it became a brick.
Theres is no possible senario whereby the internet can help you because we know next to nothing about Note 7.
I sincerely hope that you can come out of the situation with a working Note 7 in your hands whilst not burning a hole in your wallet due to the repairs. God-speed my friend, God-speed.
bill340 said:
I really have no luck here...
Any idea?
Googled already, but did not really find anything besides reinstalling...
Click to expand...
Click to collapse
This seems to be an issue in your drivers, Please uninstall all samsung related and flash box related (if exists) in your PC and try installing it again.
Alternatively, you can just walk into a Samsung Care store and get it done while you wait.
I did that already... No luck. I will try on a different pm next.
Bill sad to see this happened to you
I am exactly coming for the same forum and was following the same steps thought u were, but u took one more step forward and flashed the vitanamese firmware, your phone just messed up there. Was actually about to do the same thing but then read your comments. My phone starts but with errors and has battery drainage , i havent lost anything as it is still virgin and havent transfered anything to it yet. Will wait probably 4 to 5 days more for the official firmwares to release and fire it in.
Sorry to say but u had become the test subject...
---------- Post added at 11:07 AM ---------- Previous post was at 11:03 AM ----------
The recovery mode cannot be accessed, no matter how hard you try
Sent from my SM-N920C using XDA Free mobile app
I just was in the Samsung Care Center in Singapore with my bricked phone.
After 1 hour waiting time, a Samsung guy explained me, that they cannot do anything about it, because they don't have parts ? for this phone in Singapore because it was not launched yet and also there is no international warranty on it.
He had no idea about any software recovery or anything and suggested to get back to Dubai, where I got the phone from.
Really a bad Customerservice experience.
I also want to thank all of you for your great help and suggestions!
I think I will send the phone back to the store in Dubai now.
Well tht will be a good choice
But if u give it three more days and wait for the official firmwares to release would save you some time.
I am still following up with it.
Sent from my SM-N920C using XDA Free mobile app
I really doubt, that this will help, since I cannot flash anything in odin. After initialization I always get the error "FAIL (DeviceInfo)"
bill340 said:
I just was in the Samsung Care Center in Singapore with my bricked phone.
After 1 hour waiting time, a Samsung guy explained me, that they cannot do anything about it, because they don't have parts ? for this phone in Singapore because it was not launched yet and also there is no international warranty on it.
He had no idea about any software recovery or anything and suggested to get back to Dubai, where I got the phone from.
Really a bad Customerservice experience.
I also want to thank all of you for your great help and suggestions!
I think I will send the phone back to the store in Dubai now.
Click to expand...
Click to collapse
Same here in (Dubai) Mate, They don't even have the parts, or Tools to open the device up. If you remember me, I screwed up my Note 7 a week back, Just after two days from launch, and I still didn't receive it. They are still unable to sort it out.
I'm sure when a proper firmware for XSG (Dubai - Same as your device) and a proper ODIN is released to flash the Note 7, this will be a piece of a cake. Just hope for the best, As just like you - I too took a leap of faith and did something stupid.
Anyway, Wishing you luck !
I am not sure if this will help....
What happens when you try a older version of Odin?
Its worked for me in the past, with my s6 edge.

Bricked Galaxy A3 2017

Hello everyone, I decided to root my phone today. First I enabled OEM unlock and then installed TWRP, no problems with that. Then I tried to install CF autoroot through recovery and everything seemed fine. When I tried to boot up my phone it said something like integrity check failed and I had to do a factory reset to be able to even start the phone. I did not do that but tried to install official samsung oreo firmware through odin but it won't install, just fails. Then i got other error message saying "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". The only thing I can do now is enter download mode and nothing else but odin does not let me flash anything. I'm desperate here so any suggestion would be great. Model is SM A-320FL btw. Sorry for my english and lengthy post
Jura_11 said:
Hello everyone, I decided to root my phone today. First I enabled OEM unlock and then installed TWRP, no problems with that. Then I tried to install CF autoroot through recovery and everything seemed fine. When I tried to boot up my phone it said something like integrity check failed and I had to do a factory reset to be able to even start the phone. I did not do that but tried to install official samsung oreo firmware through odin but it won't install, just fails. Then i got other error message saying "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". The only thing I can do now is enter download mode and nothing else but odin does not let me flash anything. I'm desperate here so any suggestion would be great. Model is SM A-320FL btw. Sorry for my english and lengthy post
Click to expand...
Click to collapse
What kind of error do you get in Odin?
Is it the one that says something like "SW Rev. check fail"?
If so than for me it worked to flash the bootloader and modem of Oreo and the after that i reinstalled the OS without any problems.
First it was just a red fail for BL, CSC and those other things and later it just won't even start. When I try to install TWRP it goes to half and stays there. Thanks for the suggestion though.
Jura_11 said:
First it was just a red fail for BL, CSC and those other things and later it just won't even start. When I try to install TWRP it goes to half and stays there. Thanks for the suggestion though.
Click to expand...
Click to collapse
Was your device from a carrier, if so, try to flash the firmware that your device came with. If you can't solve this, PM me, so that we can try to resolve this on Telegram, Discord etc. :highfive:
MartinYTCZ said:
Was your device from a carrier, if so, try to flash the firmware that your device came with. If you can't solve this, PM me, so that we can try to resolve this on Telegram, Discord etc. :highfive:
Click to expand...
Click to collapse
Thank you for the reply, I don't think it was from carrier, when I tried to flash firmware I downloaded latest firmware from my current carrier so I think that shouldn't be a problem. I'll contact you tomorrow because i'm just too tired now. And update, I can flash TWRP now if that is of any help.
It is solved now, thanks everyone for your help
Jura_11 said:
It is solved now, thanks everyone for your help
Click to expand...
Click to collapse
Hi. Glad to see you got this sorted, but it may be useful for other users to see what you did to resolve this.
Yes, how did you solved that.
Looking at two A320F I found one difference:
One has AP SWREV B:2 K:0 S:0
the other one (that makes trouble): AP SWREV B:3 K:1 S:1
What exactly does it mean.
Flashing with Odin gave me erros (on device, Odin just say "failed") depending on flashing BL (SW Rev Check failed )Bootlader Device: 3, binary: 2 , while flashing AP gives Kernel Rev check fail.
So, how to go on? I was able to flash TWRP, but not Stock (neither an old 6.0 nor 8.0).
Ok, solved it. Flashing stock will probably only work to same or newer versions, not for downgrade (at least not without any special tricks that I don't know).
After downloading the latest stock FW , odin passed.
Now I still have the problem, that I can't transfer data partion from one A3 to another one.
https://forum.xda-developers.com/showpost.php?p=78062070&postcount=71
My first error was that I downloaded wrong firmware for my phone and because of that odin gave me errors. Second error was that I tried to wipe data through advanced wipe, but I needed to format it by pressing format data button. After doing that I was able to flash official stock ROM, install TWRP and root my phone. User MartinYTCZ helped me greatly with this, big thanks to him again. :victory:
starbright_ said:
Ok, solved it. Flashing stock will probably only work to same or newer versions, not for downgrade (at least not without any special tricks that I don't know).
After downloading the latest stock FW , odin passed.
Now I still have the problem, that I can't transfer data partion from one A3 to another one.
https://forum.xda-developers.com/showpost.php?p=78062070&postcount=71
Click to expand...
Click to collapse
Can't you backup your internal storage on PC or SD card, contacts, messages, phone calls, settings on samsung account and apps and data with titanium backup? When I flashed stock ROM I lost all data from my phone so be careful with that.

Categories

Resources