Hey guys. Yesterday I flashed the newest CM12 update on my phone. I love it, except after I installed it, when I turn my brightness down, my screen gets a yellow tint. This was not a problem before, and when I flash back to CM11, its gone and looks fine. Anyone have this, and what should I do?
EDIT: LiveDisplay is disabled as well. I've scoured google and XDA looking for the answer but can't find anything. The screen looks great on full brightness, but once lowered by even 1%, a yellow/green tint sets in and gets worse as the brightness gets lower. There has to be a fix for this.
EDIT #2: CM fixed this issue. Thread can be closed.
You must have flashed the Chinese version of cm12.
Try flashing again.
Pp.
PanchoPlanet said:
You must have flashed the Chinese version of cm12.
Try flashing again.
Pp.
Click to expand...
Click to collapse
That's a thing? I flashed CM12 for the jfltetmo from cyanogenmod.org itself. And I've reflashed multiple times now.
You may want to post in the cm12 thread, maybe someone may have found a solution to this.
Don't forget this is not official yet because official lollipop firmware for T-mobile s4 USA hasn't been released yet, so your dealing with "experimental" stuff that can make your phone weird and funky (like yellow tint) .
Pp.
Found a few articles on the CM forums of people having the exact same issue. Its from the 20150309 nightly and up. There should be a fix in the works. Thread can be closed, I guess?
No,,,,,,, you must share your results with others that are monitoring this thread, because they too have pisssy yellow phones and are to embarrassed to chime in with there own post.
You must elaborate, that's what the " forum " is all about.
Remember "nightlies" stand for " Time to experiment with your phone "
The results of this experiment was yellow screen.
Pp. Cyclops
Well, I downloaded the new nightly. I'm flashing it now. Will share results soon.
Sadly, the 20150314 nightly is still plagued by the tint. If anyone wants to avoid it, just stay on the 20150308 nightly. I'll report back when its been fixed.
gallowsArisen said:
Sadly, the 20150314 nightly is still plagued by the tint. If anyone wants to avoid it, just stay on the 20150308 nightly. I'll report back when its been fixed.
Click to expand...
Click to collapse
Thanks for creating a thread. I hope it receives more attention. This is not limited to your tmo s4. I'm on jflteatt with the same issue. I goggled to find this, after trying different kernels and even wiping and flashing anew. No success. Problem is exactly as described. Full brightness is well, anything else is accompanied with the tint.
Temporarily, I've installed xposed and am using screen filter to have complete control over not only brightness but my tint as well. So long as system brightness is maxed out, all plays nice. Still an inconvenience. Please quote me or alert me if a solution arises.
Sent from my SGH-I337 using XDA Free mobile app
vanberge said:
I'm confident that I got the wierd yellowish tinted color back to "stock". Here are my settings:
Adaptive Brightness: Enabled
LiveDisplay: Display mode - Automatic
LiveDisplay: Color Temperature - 6500k day/4500k night (stock, I believe)
LiveDisplay: Color Calibration - Set all colors to 55%, vs their default of 100.
Click to expand...
Click to collapse
That worked for me on (Jfltevzw) give it a try
checho408 said:
That worked for me on (Jfltevzw) give it a try
Click to expand...
Click to collapse
Thanks, man. This works pretty well. I recommend this to everyone uotil they fix it in a future nightly.
That's awesome! Worked like a charm.
I was using GPE by dan but was having really bad battery life (couldn't even get a day without no usage at all (data turned off and screen barely used). I think this was because I was using an old bootloader/modem. Then I flashed stock NK2, but it wasn't detecting my sim card for unknown reasons. After that I flashed twrp and cm12. Sim is now working fine but was getting this horrible display. I was thinking my device got damaged somehow. Thanks for finding a fix
It looks like the 20150321 nightly fixed it. I turned my color serrins back to normal and there's no annoying yellow tint! Rejoice!
This has been fixed in the 3/21 nightly.
Edit: as gallowsarisen above me stated. Sorry didn't know there was another page in thread.
Sent from my SGH-I337 using XDA Free mobile app
Related
I know it's been touched on here and there (I.E.), but I haven't found a dedicated thread to it, and I know I'm definitely not the only one who is plagued by the annoyance. It seems like some have been able to get around the issue with the international version of the phone, but the North American version appears to be quite the hurdle. Either that, or the devs for all our favorite SMS apps aren't from the good ol' US of A, and don't really care about that feature. Either way, It's annoying to have cutting-edge technology in the palm of my hand without any reliable and simple means to have something other than a solid red LED regardless of the notification it represents. On the thread linked above, I noted that some were able to get a blinking notification, I've had no such luck. Perhaps they weren't rooted. I do recall the day I got my phone, before anything had been modified whatsoever, that the LED would flash blue, but once I got GoSMS Pro installed, it changed my SMS to solid red, and has been such ever since. Nothing at all that I have tried will change it.
TLDR: Has anyone found a way to stay on a custom ROM and/or launcher, AND set different color LED for notifications (as well as blink intervals) within the realm of SMS?
disturbd1 said:
I know it's been touched on here and there (I.E.), but I haven't found a dedicated thread to it, and I know I'm definitely not the only one who is plagued by the annoyance. It seems like some have been able to get around the issue with the international version of the phone, but the North American version appears to be quite the hurdle. Either that, or the devs for all our favorite SMS apps aren't from the good ol' US of A, and don't really care about that feature. Either way, It's annoying to have cutting-edge technology in the palm of my hand without any reliable and simple means to have something other than a solid red LED regardless of the notification it represents. On the thread linked above, I noted that some were able to get a blinking notification, I've had no such luck. Perhaps they weren't rooted. I do recall the day I got my phone, before anything had been modified whatsoever, that the LED would flash blue, but once I got GoSMS Pro installed, it changed my SMS to solid red, and has been such ever since. Nothing at all that I have tried will change it.
TLDR: Has anyone found a way to stay on a custom ROM and/or launcher, AND set different color LED for notifications (as well as blink intervals) within the realm of SMS?
Click to expand...
Click to collapse
Its working great with cm9. You can set it up in the settings
Sent from my SGH-T999
Xcor3 said:
Its working great with cm9. You can set it up in the settings
Sent from my SGH-T999
Click to expand...
Click to collapse
I thought about doing CM9, but last I read it doesn't look to be a finished product? I kept up with the thread on it for a bit after its release, and it seemed there were still bugs.
disturbd1 said:
I thought about doing CM9, but last I read it doesn't look to be a finished product? I kept up with the thread on it for a bit after its release, and it seemed there were still bugs.
Click to expand...
Click to collapse
yes there are bugs. But i barely stumble to them at all. Im using it as my daily driver and its working great for me.
Xcor3 said:
yes there are bugs. But i barely stumble to them at all. Im using it as my daily driver and its working great for me.
Click to expand...
Click to collapse
Awesome, I will flash it tonight, and play around with it.
Still curious if anyone has found a workaround on any TW-based ROMs :good:
Lightflow seems to be actively trying to work on the problem.
Sent from my SGH-T999 using Tapatalk 2
Hi,
I've purchased a a Samsung Galaxy 551 (I5510) (Middle east region) about a year ago and i was running android 2.2 fine for a while. When the Gingerbread 2.3 update came out i tried installing a European ROM because the ME ROMs weren't updated, it worked fine but had a weird glitch that if the screen was off (phone still working) for a while it would be very dark when turned on afterwards, it looked like this video:
Youtube > /watch?v=Kwll8ZfgaD0
P.S. I didn't make the video, just linking it because its the same issue
it would randomly work again after a couple of lock-screen off-unlock cycles, then happen again randomly when it's off
I tried a number of GB Roms but to no avail, then finally the latest eu roms (I5510XWKPJ) fixed the problem, nowhere to be seen anymore.
After that i tried installing Cyanogen mod for the phone and the problem came back with different degrees:
1. Cyanogen 7 - normal boot, screen gets dark after being off for a while.
2. Cyanogen 9,10 - show samsung logo at start, screen gets dark as soon as the cyanogen logo appears and continues to be
Any help on what would be causing that especially on the newer CM builds? and why it doesn't happen at all in (I5510XWKPJ)
Thanks in advance,
bump
Bump, any ideas?
I just realized that i should have made this thread in the ""Upgrading, Modifying and Unlocking" thread, i will remake it there so feel free to close this.
Instead you could ask the mod to move it there....
They might consider doin if they feel it's worthy
Sent from my MT11i using xda premium
Ghostfreak NB said:
Instead you could ask the mod to move it there....
They might consider doin if they feel it's worthy
Click to expand...
Click to collapse
Yes, I definitely would have, but since the OP already created a second thread there, this one is closed.
Hi Devs
I'm from Mumbai India and i'm using galaxy nexus gsm.
It is an awesome phone but lately i'm having problem
My phone screen flashs and blackouts out of nowhere While operating my nexus and than i have to reboot it.
This has been happening from the time when i tried few custom roms (xylon, miui, overdrive, pa, minco v6 and madoco) back to back couple of weeks back. I don't know what is the cause of it and why is it happening.
So guys i need little help here.. Plzz help me fix it.
Right now I'm using baked 7 rom and gapp 4.2.1 12/12/2012.
Thank you in advance
I believe this is referred to as a Screen of death, or sod. Search the forum, and you may find some answers. Ive heard this is common on 4.2.1, but have yet to deal with it myself. Actually, though, ive had some close calls where the power button will not wake the phone, and i believe ive also seen where the actual issue is waking the phone from sleep..
Actually, I've just noticed that you're using the old gapps as well. The baked downloads page has the new gapps, and perhaps that may help you.
THANK YOU
bodh said:
I believe this is referred to as a Screen of death, or sod. Search the forum, and you may find some answers. Ive heard this is common on 4.2.1, but have yet to deal with it myself. Actually, though, ive had some close calls where the power button will not wake the phone, and i believe ive also seen where the actual issue is waking the phone from sleep..
Actually, I've just noticed that you're using the old gapps as well. The baked downloads page has the new gapps, and perhaps that may help you.
Click to expand...
Click to collapse
thanks alot,..
Have you tweaked the kernel options, messed with thecpu clock? Maybe try bringing all of that back to stock.
hi,
you guys may find reading this helpfull (it's dev's only, but reading it doesn't do any harm): http://forum.xda-developers.com/showthread.php?t=2080690
cheers
YES may be
jackbane said:
Have you tweaked the kernel options, messed with thecpu clock? Maybe try bringing all of that back to stock.
Click to expand...
Click to collapse
i had tweaked the kernal options once long back,.. it twisted kernel i guess
This thread was not created by the Paranoid Android group
This thread is dedicated to Questions and Answers that may associated with ParanoidAndroid 3.0+
This thread is for the I747/I747m only. Users of another carrier should check your specific forums
This is a place for no hassle help with Paranoid Android 3.0+. This means general questions about settings, "how to", and things of that sort. Primarily, things that would not help further the development of the ROM, but things that users would like to ask. If you are unsure of whether your concern should be posten in development or here, post it here. If it's determined that it should be in Development, I am sure someone will politely direct you to the proper place .
Finally:
NO FLAMING
Flaming in this thread will be dealt with by our moderation staff. Please don't take it upon yourself to do so. Just report the post that is inflamatory, the mods can do the rest.
Development Thread
ParanoidAndroid3.0+
No one has questions
OK please try to go easy, Im not a noob (Im just getting old) I just had my i717 note 1 stolen and i got an att Galaxy S3 on the way... Just prepping, I want to do the most stable paranoid android build out and get into some phablet action. Where can I get the install files for the 3/15 version, it sounds like thats the most stable at this point, any suggestions or points to the contrary, but most importantly where can I find the basic files for the 3/15 and whatever else you need to get from stock ui to PA... Any tips are so greatly appreciated, seriously. XDA love..
Just need to be pointed in the right direction, need full camera/main functions to maintain functionality so whats the way to go for stable tablet style PLEASE HELPPP, LOL
Sincere sincere thanks from an overworked and slightly behind the curve but loyal and dedicated Android user.
Adam
I am using 3.11. The OLED changes to its battery fully charged color @ 90%. Is there is there a way to fix this?
Sent from my Galaxy S3 using Tapatalk
Everything is running great. I came from ParanoidKangDroid because of a couple programs where expanded desktop didn't stick.
I haven't been able to make my lock screen pie be the same colors as my device wide color scheme. It always defaults to stock colors for that. Ideas?
KorGuy123 said:
Everything is running great. I came from ParanoidKangDroid because of a couple programs where expanded desktop didn't stick.
I haven't been able to make my lock screen pie be the same colors as my device wide color scheme. It always defaults to stock colors for that. Ideas?
Click to expand...
Click to collapse
Never mind... I'm an idiot. Had to go hybrid properties > apps and change the color for system ui and android system and reboot. Doh.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
S3 lockups and LTE?
Hi
I put this on my GS3 (I747 AT&T) last night and so far it's pretty good.
I have noticed some weird occasional lockups and reboots, which is find for unofficial rom, I know what I'm getting into.
My other issue is that it seems to prefer 3G, HSDA, or HSDA+ over LTE even though I'm in a market with extensive LTE coverage. Is there any way to "weight" this?
Also the on-screen soft keys seem redundant, is there a way to disable them without disabling the status bar (PIE mode hides both)?
Thanks!
MrAkai said:
Hi
I put this on my GS3 (I747 AT&T) last night and so far it's pretty good.
I have noticed some weird occasional lockups and reboots, which is find for unofficial rom, I know what I'm getting into.
My other issue is that it seems to prefer 3G, HSDA, or HSDA+ over LTE even though I'm in a market with extensive LTE coverage. Is there any way to "weight" this?
Also the on-screen soft keys seem redundant, is there a way to disable them without disabling the status bar (PIE mode hides both)?
Thanks!
Click to expand...
Click to collapse
Lockups and reboots are kernel related you can try flashing another kernel (or wait for an update) I use this. It's the 4/09 All-Star Devs Kernel. You have to make sure if you flash a kernel not to go any newer than 4/09/13 or it won't work this this ROM until it gets updated.
Make sure your APN settings are correct, make sure LTE is selected in your settings and if all else fails do a Speed Test to check your speeds.
You can disable Nav Bar (Bottom) Settings > Hybrid Properties > Nav Bar 0% Apply and reboot if it prompts for it.
KorGuy123 said:
Lockups and reboots are kernel related you can try flashing another kernel (or wait for an update) I use this. It's the 4/09 All-Star Devs Kernel. You have to make sure if you flash a kernel not to go any newer than 4/09/13 or it won't work this this ROM until it gets updated.
Make sure your APN settings are correct, make sure LTE is selected in your settings and if all else fails do a Speed Test to check your speeds.
You can disable Nav Bar (Bottom) Settings > Hybrid Properties > Nav Bar 0% Apply and reboot if it prompts for it.
Click to expand...
Click to collapse
Awesome, thanks for the advice, I'll give it a shot!
Actually, I have noticed the same thing for me, only in the past two days.. Specifically: random sleeps of death with no regularity, and when trying to use Spotify, or I Heart Radio when plugged into my headphones (Samsung set that came with the phone) phone will not play music through the app, but it will work just fine when plugged into an aux cable... I have changed nothing in my kernel settings, or system settings since things settled down.
Very strange.
Thanks I was having some problems that kernel seem to fix them.
Sent from my Nexus 7 using Tapatalk HD
i'm just curious, but does anyone know why the PA team doesn't have an official ROM for our d2att version? (or am i just missing it somewhere?)
mrhomiec said:
i'm just curious, but does anyone know why the PA team doesn't have an official ROM for our d2att version? (or am i just missing it somewhere?)
Click to expand...
Click to collapse
Afaik pa only officially supports nexus devices. Everything else is unofficial I think.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
tablet ui statusbar clock size
Is there anyway to change the clock size and position of the date in tablet ui. The giant clock and date rilling off the edge is a deal breaker for me and this ROM. I've searched everywhere I know of and would apprieciate any advise. Thanks
mrhomiec said:
i'm just curious, but does anyone know why the PA team doesn't have an official ROM for our d2att version? (or am i just missing it somewhere?)
Click to expand...
Click to collapse
Yup only nexus devices and now the Oppo Find 5 are supported other devices are not supported. Someone has ported Paranoid Android over to unofficial devices.
Sent from my Nexus 7 using Tapatalk HD
What do the instructions mean by "update recovery"?
Thanks!
I'm on the latest version of Paranoid Android. I've been experiencing this weird noise. It happens when the phone is placed down or just the screen turning on or off. In the video, it sounds like I'm placing the phone down with some force but I've activated the sound even when putting it down super gently.
Here's the video:
http://www.youtube.com/watch?v=ekbad5xoQos
If anyone can tell me how to disable this noise or what causes it, I would be greatly appreciative!
burninghotcheese said:
What do the instructions mean by "update recovery"?
Thanks!
Click to expand...
Click to collapse
Simple answer:
The instructions are simply telling you to make sure that you have the most recent recovery for your device is installed, and if not, to install it. Oftentimes not having an updated recovery is what causes the Status 7 errors when trying to flash new ROMs.
---------- Post added at 02:12 PM ---------- Previous post was at 02:07 PM ----------
mirrored said:
I'm on the latest version of Paranoid Android. I've been experiencing this weird noise. It happens when the phone is placed down or just the screen turning on or off. In the video, it sounds like I'm placing the phone down with some force but I've activated the sound even when putting it down super gently.
Here's the video:
http://www.youtube.com/watch?v=ekbad5xoQos
If anyone can tell me how to disable this noise or what causes it, I would be greatly appreciative!
Click to expand...
Click to collapse
Uhm, that is odd? Though it sounds like it might be the notification sound of the microsd card disengaging and re-engaging?
Just a thought.
I read in the PA development thread that ATT and TMO roms are.interchangeable. Has anybody tried flashing the T-Mobile PA onto their ATT s3?
sent from the very outdated xda premium app
NicholasQ said:
I read in the PA development thread that ATT and TMO roms are.interchangeable. Has anybody tried flashing the T-Mobile PA onto their ATT s3?
sent from the very outdated xda premium app
Click to expand...
Click to collapse
Other than the updated kernel and displays drivers there is no difference in roms. Regardless if it'll work it won't give you anything you don't already have.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hello!
My name is KJT (on the net) and I have a T-Mobile Samsung Galaxy SIII t999. When it came to me it had stock 4.0.4 Android. First thing I did was Root/CWM recovery it so that I could Wi-Fi Tether and have a custom recovery.. I found nothing wrong with the phone and it did everything I needed it to and more! At the time I wasn't willing to customize my firmware because I didn't really care.. Two(almost 3) years passed by and so much has changed in the modding community. So I checked on faster ROM's for my device and found so many to pick from! I didn't know what to pick.. I tried a couple of ROM's, but I found myself going back to SlimKat 4.4.2.build.3-OFFICAL-3061 and WOW was I surprised at how the look and feel made my phone like new again.. I now say to my friends that I upgraded my S3 into the S4.. Not really, but its "like" I did, with a software update. Heheh..
Anyways back to my device.. After updating to SlimKat I found some things a little weird with my phone, but nothing I couldn't figure out (except one thing that I will get into a little later). There was a couple things screwy with it and I had to research for a couple of days to find the answers. After fixing the small issues I wanted to fix the CPU issues and why it would throttle when I played a game longer then 5mins.. I found the option and disabled it, but it seemed to drain my battery way faster with it off. I then looked at new kernels for my phone and what would work good for battery and for performance. I found KTweaker and realized that installing SlimKat changed my model number to Samsung-SGH-I747. So I installed the Kernal (3.4.82-cyanogenmod-g9a7e2a6 [email protected] #1 Sun Mar 9 16:16:31 MST 2014). It seemed to work really well, but I see the LED blinking Blue on bootup(and stay blinking) every time I restart my phone now after installing this Kernal. So I tricked the LED to turn off by using Light Manager's test notification option. Once I turn on test and then shut screen off, the LED turns to the color I was testing in Light Manager and the LED turns off.. So that is the trick, but if there is anyone that can help me understand or fix the Blue LED that stays blinking after boot up, I would really appreciate it. I have no other apps that control notifications, and I have tried turning off all LED options, but nothing seems to work. The only thing I can do is trick the LED..
So after that, I decided I would try and find another Kernel/Tweaks, but after flashing Xtweak it seems to be running a bit smoother. I am stuck no with only one issue and that is the Blue LED flashing at boot and staying on until I trick it. KTweak app (Not XTweak) that is listed in the menu had some crazy OC settings and profiles. Now I think I am set with my CPU issues. I played my game Order and Chaos Online(GAME PLAY) for 4 hours yesterday with no lag and the CPU never throttled.
So my only problem is the Blue LED at boot.. I hope to figure it out and I will report back if I find the solution. Thanks for reading.
------------------------------------------
::UPDATE:: March 01-06, 2014...
------------------------------------------
First off the LED blue light has been fixed with a format of the internal memory and flashing a new rom. I believe the problem was with Slimkat ROM and Ktoons kernel on build 3.
I have SlimKat Build 4 now after some internal data lose(system/data/cache and most of my personal data from the last month... lol). I recommend not trying to fix your phone at 3:am and tired.. I had a back up from last month, but I know I lost a lot of other stuff I can't remember, but I think it was a good thing, because my phone is now running faster and with a lot more space on the internal hdd. So I guess I did a system restore with updating to Build 4. I am really enjoying build 4 and haven't come across any problems. I have not installed KToons kernel yet, but he has updated it and I will try it out when I have more time. I will update later. Thanks for reading..
xKJTx
If you don't need led
Go to
Settings→Display→Light Options→Notification Led
And disable it.
Sent from my Slim Muffin.
Thanks for the reply!
Casanova said:
If you don't need led
Go to
Settings→Display→Light Options→Notification Led
And disable it.
Sent from my Slim Muffin.
Click to expand...
Click to collapse
I do need the notifications turned on, but when ever I restart my phone the blue LED light(top left cover on face of device) continues to stay pulsing way past boot. I use to see it only pulse a few times at boot and then it would stop and load the OS. It only started happening right after I flashed the KToon kernel. I love the kernel and it make my device so much better then it was before with the SlimKat kernel.
I also have tried many different steps to stop the pulse at start up, but only found that if I trick it and put on another LED notification, then it stops after I make it change to the other notification.. Its almost like it gets stuck on the notification for boot up. I uninstalled all apps and also reformatted.. I was thinking of another kernel install, but have not found a better kernel(even with this issue) then KToons..
xkjtx said:
I do need the notifications turned on, but when ever I restart my phone the blue LED light(top left cover on face of device) continues to stay pulsing way past boot. I use to see it only pulse a few times at boot and then it would stop and load the OS. It only started happening right after I flashed the KToon kernel. I love the kernel and it make my device so much better then it was before with the SlimKat kernel.
I also have tried many different steps to stop the pulse at start up, but only found that if I trick it and put on another LED notification, then it stops after I make it change to the other notification.. Its almost like it gets stuck on the notification for boot up. I uninstalled all apps and also reformatted.. I was thinking of another kernel install, but have not found a better kernel(even with this issue) then KToons..
Click to expand...
Click to collapse
Led is related to kernel.
Try to call your kernel dev.
Report him this issue.
Sent from my Slim Muffin.
Do you know?
Casanova said:
Led is related to kernel.
Try to call your kernel dev.
Report him this issue.
Sent from my Slim Muffin.
Click to expand...
Click to collapse
Thank you and I will speak to him/her.
Question for you.. Do you know of any other kernels that might be better or the same as KToons? If you don't know thats cool.. Thanks for the replies!
-KJT-
xkjtx said:
Thank you and I will speak to him/her.
Question for you.. Do you know of any other kernels that might be better or the same as KToons? If you don't know thats cool.. Thanks for the replies!
-KJT-
Click to expand...
Click to collapse
You want stability, stick with stock
Thank you for reply..
LoopDoGG79 said:
You want stability, stick with stock
Click to expand...
Click to collapse
I had the stock for over 2 years and wanted something new.. More performance and battery life. This kernel has done that with the KTweak settings I have.
-KJT-
EDIT: What I really want is what this kernel is giving me, its just the led problems I need to solve... lol
xkjtx said:
Thank you and I will speak to him/her.
Question for you.. Do you know of any other kernels that might be better or the same as KToons? If you don't know thats cool.. Thanks for the replies!
-KJT-
Click to expand...
Click to collapse
Try this app
https://play.google.com/store/apps/details?id=com.bam.android.androidtweaker.two
It has some cool tweaks
Sent from my Slim Muffin.
Edit
P.S.
You said you have T-Mobile S3 but you are flashing AT&T S3 kernels and ROMs on it .[emoji53]
Thank you for reply!
Casanova said:
Try this app
[link removed because free user]
It has some cool tweaks
Sent from my Slim Muffin.
Edit
P.S.
You said you have T-Mobile S3 but you are flashing AT&T S3 kernels and ROMs on it .[emoji53]
Click to expand...
Click to collapse
I will try that app out and see what its about..
This rom is for both Category: d2att-d2tmo, but when it installed it said that now I am an d2att with I747 model.. When it came to me in the box it had 4.0.4 and was t999 model. After installing the Category: d2att-d2tmo rom it changed my phones specs..
-KJT-
xkjtx said:
I will try that app out and see what its about..
This rom is for both Category: d2att-d2tmo, but when it installed it said that now I am an d2att with I747 model.. When it came to me in the box it had 4.0.4 and was t999 model. After installing the Category: d2att-d2tmo rom it changed my phones specs..
-KJT-
Click to expand...
Click to collapse
But the kernel is obviously for AT&T
Sent from my Slim Muffin.
Casanova said:
But the kernel is obviously for AT&T
Sent from my Slim Muffin.
Click to expand...
Click to collapse
S3 kernels are interchangeable.
Sent from my Nexus 7 2013 edition.
LoopDoGG79 said:
S3 kernels are interchangeable.
Sent from my Nexus 7 2013 edition.
Click to expand...
Click to collapse
[emoji33]
Sent from my Slim Muffin.
Casanova said:
[emoji33]
Sent from my Slim Muffin.
Click to expand...
Click to collapse
Yup, i've been flashing on Galaxy's since the S2. After the S2, Samsung released identical hardware for all carriers, including the international edition. The only software you had to worry about is recoveries, Baseband, and if on T Mobile, the TW version if you wanted Wifi calling.
Sent from my SGH-M919 using Tapatalk
Thanks for the reply!
LoopDoGG79 said:
Yup, i've been flashing on Galaxy's since the S2. After the S2, Samsung released identical hardware for all carriers, including the international edition. The only software you had to worry about is recoveries, Baseband, and if on T Mobile, the TW version if you wanted Wifi calling.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
My wireless calling works fine and I am on T-Mobile network. So I guess I did everything correct.. lol
Still trying to figure out the Blue LED at boot....
UPDATE!!!
Ok, so I found out that it was the Ktoons kernel that was giving the notification Blue LED at start and wouldn't go away. I guess it was set to notify at start, but then never turned off. This is now fixed because of a flash to the new build 4 of slimkat.
So the issues that I was having before with the LED was only because of the kernel I flashed on a slimkat rom. It worked great, but had the LED issue.
::UPDATE::
Ok, now to talk about my new updated build 4 slimkat device.
**MAIN POST**