I'm on philz touch, is it possible to switch to twrp? - Galaxy Note II Q&A, Help & Troubleshooting

I heard twrp is better for flashing and such (im having problems flashing agni, i can't press next, it just freezes).

doftae said:
I heard twrp is better for flashing and such (im having problems flashing agni, i can't press next, it just freezes).
Click to expand...
Click to collapse
Yes,
I was on philz before, when i tried to flash twrp .zip with philz touch, it seemed to fail.....so i think you can enter dowload mode and flash twrp .tar with odin.....

Related

[Q] Recovery problems with Legacy ROM 1.05

I can't boot into recovery. "ThePeople'sROM" splash page just hangs forever and never goes into recovery.
Methods I've tried to get into recovery:
"Reboot Recovery" from the Power Button Menu when phone is on.
Volume Down+Camera+Power
Volume Up+Camera+power
Your recovery probably got overwritten And for some strange reason your phone still starts up. Anyway just reflash cwm from odin and you should be golden
geartex said:
I can't boot into recovery. "ThePeople'sROM" splash page just hangs forever and never goes into recovery.
Methods I've tried to get into recovery:
"Reboot Recovery" from the Power Button Menu when phone is on.
Volume Down+Camera+Power
Volume Up+Camera+power
Click to expand...
Click to collapse
Could either use fastboot to get into recovery, or simply Odin CWM/TWRP in again.
Btw, TWRP 2.5 is a tad buggy with UI, so you may want to use CWM.
Thanks
I used ODIN to flash CWM and it worked fine. Thanks a lot.
I couldn't figure out how to install TWRP. Does CWM support MTD roms (which I'm currently running) ?
geartex said:
I used ODIN to flash CWM and it worked fine. Thanks a lot.
I couldn't figure out how to install TWRP. Does CWM support MTD roms (which I'm currently running) ?
Click to expand...
Click to collapse
cwm 5.0.2.7 is bml
anything higher is mtd
my devhost in the signature has cwm and twrp downloads

Odin vs Recovery, which is better for flashing the latest Philz recovery?

Which is the better method, flashing a new Philz recovery via ODIN, or flashing it via a custom recovery.
Also, can flashing the wrong custom recovery hard brick my phone?
Just flash the new recovery through your current recover
I was on PhilZ and i flashed the latest TWRP through PhilZ no problems
Not sure about the question, maybe

[Q]Recovery switching

Thinking about switching my recovery from Twrp 2.7.0.1 to Philz touch. no current cool looking themes for Twrp,so just wanna check out Philz. I do have a couple questions though hopefully someone can answer....
1) Should i restore from my custom rom on Twrp to my stock backup i made before switching Recoveries?
2)when i switch Recoveries, do my backups delete on twrp? i know the backups on twrp won't carry over on philz but, if i do not like philz and decide to go back to twrp will all my backups be there?
3)Am i screwed if the philz recovery fails and something messes up? or will twrp still be there.
Thanks for any help.
1) You dont need to be on any certain rom, you just need to fastboot flash what ever recovery you want.
2) Your backuls will still be on your storage untill you delete them.
3) If philz dosent flash right, it may not boot to recovery or you may be left with twrp. But either way you can just fastboot flash back to the twrp you were on before.
The Flashify app works great for switching recoveries too. Just remember to check your md5 before you fastboot flash anything. Bad things can happen if you fastboot flash a bad img.
Sent from my HTC6525LVW using Tapatalk
disconnecktie said:
The Flashify app works great for switching recoveries too. Just remember to check your md5 before you fastboot flash anything. Bad things can happen if you fastboot flash a bad img.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I only use fastboot. If your flash fails, just flash it again. Philz is the best, imo. Just put it in fastboot mode then "fastboot flash recovery recovery.img" and you are done(where recovery.img is the name of your image file, ijust switch all my current ones to recovery.img when i dump them into my adb folder and erase the old one).

[Q] stuck on recovery

hi,
i have TWRP installed as my recovery. i just boot to it and after i've done backup the device i rebooted it.
but instead of returning to the noraml state is booted again to recovey.
now its stuck on the recovery. everytime i reoobt to system or even poweroff when the device boot up
its still boots to recovery.
is there something i can do?
i have the galaxsy tab 3 lite sm-t110.
taiber2000 said:
hi,
i have TWRP installed as my recovery. i just boot to it and after i've done backup the device i rebooted it.
but instead of returning to the noraml state is booted again to recovey.
now its stuck on the recovery. everytime i reoobt to system or even poweroff when the device boot up
its still boots to recovery.
is there something i can do?
i have the galaxsy tab 3 lite sm-t110.
Click to expand...
Click to collapse
Im pretty sure your rom that you are running is corrupted, this has happened to me
when this happens recovery will not let you run that ROM. So it will
keep rebooting into recovery. Try this, go into recovery Wipe Data,Cache and Dalvik
then reboot, if it still doesn't work try flashing a Rom.
my rom is the orginal sumsung rom that came with the device only rooted.
i will try wiping the data/cach/dalvik and then maybe restore an old backup that i have.
thanks for the advice.
well it didnt work.
i also tried to recover a working version of my rom and still boot loop to recovery.
plus when i power it off and connect the power cord it startup automaticaly to recovery.
taiber2000 said:
well it didnt work.
i also tried to recover a working version of my rom and still boot loop to recovery.
plus when i power it off and connect the power cord it startup automaticaly to recovery.
Click to expand...
Click to collapse
I think The onlyest way is to flash a Stockrom to your Tab.
Then try to flash a Recovery to your Tab again, but i prefere CWM or Philz Touch not TWRP.
maybe i should install philz on top of twrp and then restore old backup?
i dont think i can get the orignal frimware form samsung in my country.
taiber2000 said:
maybe i should install philz on top of twrp and then restore old backup?
i dont think i can get the orignal frimware form samsung in my country.
Click to expand...
Click to collapse
The prob is, only with CWM or Philz you restore Backups froh there, is The backup froh TWRP you need TWRP as Recovery.
Download from sam The Version what is in The box .
well i found the orginal rom in .img file at samfirmware. i belive its pure stock - i know that someone of you can confrim this - but how to i flash it?
i belive is with odin buth as for the instracion. is it like flashin recovery with odin? if so i will follow that instracation and give it a go.
I have the same problem, did anybody figure this out?
ended up just reflashing the stock rom from odin instead of twrp and it worked.
Fix
bierma32 said:
I think The onlyest way is to flash a Stockrom to your Tab.
Then try to flash a Recovery to your Tab again, but i prefere CWM or Philz Touch not TWRP.
Click to expand...
Click to collapse
So I've done this before, attempting to install a different type of ROM, the only way to repair this is to return to stock via Odin. Download the stock rom in the 10.1 dev thread, reboot into download, and flash via Odin.

how to switch from TWRP 2.6.3.3 to Philz 6.48.4?

hey guys im on omega rom and i have twrp recovery and want to change to philz recovery?
how to do this?
Download the recovery zip that's for your phone and flash it in TWRP, rebooting into recovery should take you to Philz
http://forum.xda-developers.com/showthread.php?p=34983286
aboalghool said:
hey guys im on omega rom and i have twrp recovery and want to change to philz recovery?
how to do this?
Click to expand...
Click to collapse
Simply take hold of latest Philz recovery (tar file) and flash it via ODIN 3.09. Done.
Sent from my GT-N7100 using Tapatalk

Categories

Resources