I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Veras07 said:
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Click to expand...
Click to collapse
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
fogame said:
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
Click to expand...
Click to collapse
I did everything, but the problem begins when I install the updates.
If I only install v5, my note doesn't reboot by itself.
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
sawixso81 said:
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
Click to expand...
Click to collapse
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Veras07 said:
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Click to expand...
Click to collapse
How did you update the baseband and bootloader? Mines doing the exact same thing
G2blkteg said:
How did you update the baseband and bootloader? Mines doing the exact same thing
Click to expand...
Click to collapse
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
As I have understood, you can only update the baseband and bootloader through ota. I Flashed the rom twice, the first time only the system was updated but no the baseband, the second did the modification of odin and everything went perfect.
G2blkteg said:
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Click to expand...
Click to collapse
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Veras07 said:
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Click to expand...
Click to collapse
So how did you modify odin to update the baseband and bootloader?
G2blkteg said:
So how did you modify odin to update the baseband and bootloader?
Click to expand...
Click to collapse
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Veras07 said:
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Click to expand...
Click to collapse
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
G2blkteg said:
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
Click to expand...
Click to collapse
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Veras07 said:
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Click to expand...
Click to collapse
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
G2blkteg said:
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
Click to expand...
Click to collapse
About the unlimited tethering I don't know.
Veras07 said:
About the unlimited tethering I don't know.
Click to expand...
Click to collapse
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
G2blkteg said:
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
Click to expand...
Click to collapse
That's the correct file.
Veras07 said:
That's the correct file.
Click to expand...
Click to collapse
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
G2blkteg said:
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
Click to expand...
Click to collapse
Place the file on AP
Related
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
muxa1980 said:
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
Click to expand...
Click to collapse
i tried downloading the latest firmware from sammobile.com but it only had the .tar.md5 file, no csc file, so im not sure if i could follow this process
Just flash it as PDA.
Sent from my GT-I8160
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
is there anything i need to do before i flash it as PDA?
ginryu006 said:
is there anything i need to do before i flash it as PDA?
Click to expand...
Click to collapse
wipe data/cache dalvik before and after flash
Rox said:
wipe data/cache dalvik before and after flash
Click to expand...
Click to collapse
i see, thanks. so if i flash that rom, will i lose my root access?
ginryu006 said:
i see, thanks. so if i flash that rom, will i lose my root access?
Click to expand...
Click to collapse
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Rox said:
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Click to expand...
Click to collapse
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
ginryu006 said:
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
Click to expand...
Click to collapse
Take any XXMG2 from here: http://forum.xda-developers.com/showthread.php?t=2340849
ginryu006 said:
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
Click to expand...
Click to collapse
back to GB Stock ROM, and you can use jelly bean 4.1.2 Frimware for your region country, flash with odin, put PDA and CSC, if your flash done, go to recovery mode, and clear data and cache , and now you can reboot , finish, your trouble is done
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
help! i did what you said and now my phone's stuck on the boot screen. i can't even access download or recovery mode
I just want to know if i its possible to flash 4.2.2 rom official over custom rom 4.1.2 via odin? And what will be the process. Thank you.
kramzkie10 said:
I just want to know if i its possible to flash 4.2.2 rom official over custom rom 4.1.2 via odin? And what will be the process. Thank you.
Click to expand...
Click to collapse
Yes, it's possible. Just flash through ODIN. And after flash, reboot into stock recovery and wipe data or else you will get a bootloop.
soralz said:
Yes, it's possible. Just flash through ODIN. And after flash, reboot into stock recovery and wipe data or else you will get a bootloop.
Click to expand...
Click to collapse
I have downloaded the Latest Indian 4.2.2 update. Can anyone plz let me know how update this whole filmware by Odin
satyajit2412 said:
I have downloaded the Latest Indian 4.2.2 update. Can anyone plz let me know how update this whole filmware by Odin
Click to expand...
Click to collapse
Click PDA section. Only have 1 file right?
satyajit2412 said:
I have downloaded the Latest Indian 4.2.2 update. Can anyone plz let me know how update this whole filmware by Odin
Click to expand...
Click to collapse
See instructions here - http://forum.xda-developers.com/showpost.php?p=45340455&postcount=3
neawasthi said:
See instructions here - http://forum.xda-developers.com/showpost.php?p=45340455&postcount=3
Click to expand...
Click to collapse
Thanks guys. I have successfully updated my phone
Have been a beta user for the ATT mm update. I can't get the phone to update to the official MM firmware that was released. I tried to see if I can and how to but all the guides don't mention build number N920AUCU2BPB1. Thanks
n2speed125 said:
Have been a beta user for the ATT mm update. I can't get the phone to update to the official MM firmware that was released. I tried to see if I can and how to but all the guides don't mention build number N920AUCU2BPB1. Thanks
Click to expand...
Click to collapse
Find the stock lollipop files(they're around here somewhere just don't have time to look and link it for you), flash through Odin, then OTA up to the latest.
Sent from my SAMSUNG-SM-N920A using Tapatalk
jellybear456 said:
Find the stock lollipop files(they're around here somewhere just don't have time to look and link it for you), flash through Odin, then OTA up to the latest.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Click to expand...
Click to collapse
Found the files and have Odin running. Do I use all the files (BL AP CP CSC)?
n2speed125 said:
Found the files and have Odin running. Do I use all the files (BL AP CP CSC)?
Click to expand...
Click to collapse
I don't believe you will need to flash the CSC, but doing so shouldn't hurt. If you do and have issues booting afterwards then just head back to download mode and flash everything but the CSC.
jellybear456 said:
I don't believe you will need to flash the CSC, but doing so shouldn't hurt. If you do and have issues booting afterwards then just head back to download mode and flash everything but the CSC.
Click to expand...
Click to collapse
Not flashing the CSC File will only hurt VoLTE. Won't work on AT&T with out. Flashing CSC WILL WIPE YOUR PHONE. I plan on making a thread on the odin pb2 with files when I get time.
TechNyne66 said:
Not flashing the CSC File will only hurt VoLTE. Won't work on AT&T with out. Flashing CSC WILL WIPE YOUR PHONE. I plan on making a thread on the odin pb2 with files when I get time.
Click to expand...
Click to collapse
THank you all. I first flashed only the AP file and the phone finished flashing but upon restart, was stuck at the Note 5 screen. Went back and flashed all the files and everything is working great. Downloading the MM update right now.
n2speed125 said:
THank you all. I first flashed only the AP file and the phone finished flashing but upon restart, was stuck at the Note 5 screen. Went back and flashed all the files and everything is working great. Downloading the MM update right now.
Click to expand...
Click to collapse
Glad to hear that.:good:
n2speed125 said:
THank you all. I first flashed only the AP file and the phone finished flashing but upon restart, was stuck at the Note 5 screen. Went back and flashed all the files and everything is working great. Downloading the MM update right now.
Click to expand...
Click to collapse
You have to flash everything coming from mm to lp
I haven't done anything to my phone since I Unlocked my Bootloader, Upgraded to MM and Unlocked again, then installing PaulPizz from July (it's an outdated version, I know).
The thread I used to put on MM, put on the PD1 modem. I need to upgrade to PF3. I don't see a thread on how to do it Can someone explain to me how that works? Do I need to re-flash the full firmware and re-unlock or just the modem file? Please provide detailed instructions. Thanks.
Just download the partial update from here and flash via ODIN.
http://forum.xda-developers.com/showpost.php?p=67481370&postcount=1403
Note you are flashing a kernel as well so you may have to reflash whichever kernel you prefer.
BTW I'm still running Jasmine 6.0
freduser said:
Just download the partial update from here and flash via ODIN.
http://forum.xda-developers.com/showpost.php?p=67481370&postcount=1403
Note you are flashing a kernel as well so you may have to reflash whichever kernel you prefer.
Click to expand...
Click to collapse
Is a FDR required when flashing this file? Will I need to re-unlock?
Sent from my SM-N910V using Tapatalk
JOSHSKORN said:
Is a FDR required when flashing this file? Will I need to re-unlock?
Click to expand...
Click to collapse
If you're presently on a unlocked and rooted rom this will not lock the boot loader or require reroot.
freduser said:
If you're presently on a unlocked and rooted rom this will not lock the boot loader or require reroot.
Click to expand...
Click to collapse
so am on Xrom with the PD1 baseband,so what your saying all i should do is flash via odin the N910VVRU2CPF3 Partial Firmware + Patched Kernel and i can flash my prefer kernel after and i would be now on the latest baseband?
desmond462 said:
so am on Xrom with the PD1 baseband,so what your saying all i should do is flash via odin the N910VVRU2CPF3 Partial Firmware + Patched Kernel and i can flash my prefer kernel after and i would be now on the latest baseband?
Click to expand...
Click to collapse
Yes, this does not touch the boot loader as I understand.
freduser said:
Just download the partial update from here and flash via ODIN.
http://forum.xda-developers.com/showpost.php?p=67481370&postcount=1403
Note you are flashing a kernel as well so you may have to reflash whichever kernel you prefer.
Click to expand...
Click to collapse
I'm going to need better instructions.
I downloaded N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.md5.7z
Extracted it via 7zip
Booted into Download Mode
Connected my cable to my computer
Started Odin
Clicked AP, loaded N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.md5
Clicked START
It Failed.
Can you help me?
EDIT: OK, this is odd. It failed the first time and went through the second time. It worked. Thank you, @freduser .
No problem
Aren't pd1 and pf3 the same thing?
I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
HUCCG said:
I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
wmzed said:
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
Click to expand...
Click to collapse
are you on the latest baseband for your phone?
ratchetrizzo said:
are you on the latest baseband for your phone?
Click to expand...
Click to collapse
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
wmzed said:
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
Click to expand...
Click to collapse
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
ratchetrizzo said:
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
Click to expand...
Click to collapse
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
wmzed said:
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
Click to expand...
Click to collapse
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
ratchetrizzo said:
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
Click to expand...
Click to collapse
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
wmzed said:
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
Click to expand...
Click to collapse
how did you make out?
ratchetrizzo said:
how did you make out?
Click to expand...
Click to collapse
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
wmzed said:
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
Click to expand...
Click to collapse
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
ratchetrizzo said:
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
Click to expand...
Click to collapse
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
wmzed said:
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
Click to expand...
Click to collapse
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
ratchetrizzo said:
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
Click to expand...
Click to collapse
I have finally managed to figure it out. You need to completely format the entire ROM currently installed from your phone. Once that is done, you can add any ROM to install properly. I'm running well on OctOS-N 3/17/2017 build.
Thanks all for your help.