I was wondering if anyone had thoughts or has even tried these types of car mounts.
http://www.ebay.com/itm/Nexcon-Magn...lde-/221655676812?hash=item339bb5378c&vxp=mtr
Its magnetic so I was wondering if people thought our Nexus 5 would work with it without the metal plate they supply. Seeing as the Nexus 5 has magnets in it's back I would think the only question is if the magnets used are attracted to the ones in the Nexus 5 and the placement of the magnets. I may get one to try out but I wanted to see people's thoughts anyway.
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
ahmad shishani said:
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
Click to expand...
Click to collapse
I wasn't sure if inside the Nexus 5 are magnets or, as you say, metal disks. I know my old Palm Pre had magnets in the back of the phone for it's TouchStone charger. I actually have two of those. And the Nexus 5 actually connects with that really well. Almost like it was made for it. If these docks are similar to what the TouchStone charger is as far as magnet placement, it should work really well without that metal plate they give you. But the plate does come with it to use with a phone case just in case. So I may just put down the 10 bucks or so and see how it goes.
Cool let me know what turns out, I may kick one too off ebay
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
DosNexus said:
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
Click to expand...
Click to collapse
rpr69 said:
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
Click to expand...
Click to collapse
Good to know that these do in fact work without those metal plates. I thought they'd might but thanks for confirming it. I don't use a case so it should be perfect for me. I'll definitely be getting one now.
Made my own car charger. Too bad my Spigen case is too thick, so can't use it. Or I just have to risk breaking my phone by not using the case..... Dilemma...
I use kenu airframe + google Nexus qi charger = perfect solution.
I ended up buying this one and it works perfectly.
http://www.ebay.com/itm/381075023900?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
JaymzTA said:
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
Click to expand...
Click to collapse
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
I have another mount, I believe it's called "iMagnet" which is almost identical. After using it for the past year with my nexus 5, I have some gripes about it. It's not an incredibly solid grip, which means every bump is going to make your phone start rotating one way or the other. I like to place my phone in landscape mode but since it's in landscape mode, the phone will twist on the mount until it's touching the dash. I'll periodically move the phone back to the center of the mount while I'm driving which probably isn't safe. Ive used my phone with cases, without cases, with dbrand skins, without. The official Google "bumper" and my spigen neo hybrid are both too thick for the mount to have a good hold, so it really slides all over the place. Using a skin, doesn't affect it too much though. If I were to get another car mount I wouldn't get one of these. It's not horrible, but it just gets annoying.
Sent from my Nexus 5 using XDA Free mobile app
jsgraphicart said:
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
Click to expand...
Click to collapse
On your recommendation I just ordered one from amazon
JaymzTA said:
On your recommendation I just ordered one from amazon
Click to expand...
Click to collapse
I think you'll be happy with it
I have one, and I love it. I've got one of the slim Spigen cases and I put one of the metal plates between the phone and the case. I had to play with the position to make sure I could still use NFC, Qi charging, and GPS worked fine.
Now I feel super confident in my purchase. Thanks guys!
I've been happy with this one from amazon http://www.amazon.com/gp/product/B00V54LQO4?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 only $10.99.
jsgraphicart said:
I think you'll be happy with it
Click to expand...
Click to collapse
I just received it in the mail, and the build quality seems pretty good. I just had neck surgery the other day, so I won't be able to use it for at least a few weeks. I can't wait to try it out!
Related
Good news for all you Proclip fans,
I just recieved mine today and it works with the Samsung Extended battery just as well as the standard battery. There is a 1/2 in space behind the phone that should allow for even the most extreme extended batteries to fit as long as the battery cover does not extend beyond where the original battery cover fits (like if it wraps around the side of the phone it will not fit).
I ordered Proclip part number 513331 (Hard wired install).
Proclip doesn't disappoint either, this mount is just as awesome as the one for my old DINC. Nice and sturdy.
I'll post some pics later when I get it installed.
As is typical with proclip mounts, the mount is designed based on the physical dimensions of the phone (specifically the sides of the phone) so cases that change those dimensions will cause the phone to not fit in the grooves correctly.
Pix of the proclip in action
Grabbed a couple of pics for anyone interested.
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
T-Keith said:
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I wont argue that they are spendy - I already had the base part but it's like $100 for both pieces for newbies.
But I do get something that no other mount has been able to offer me - this one is wired into the car, I can use only one hand to put my phone in it, and it doesn't fall or move when I press too hard. Considering the Verizon one is $40 and a POS it seemed worth the extra.
But yea if you have a case it's not so good.
does you phone fall if you turn the screen for navigation ?
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Should be good, as it is adjustable. I wish they made the sides of the powered mount adjustable...
juju2lose said:
does you phone fall if you turn the screen for navigation ?
Click to expand...
Click to collapse
Nope, it stays in there really well.
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Got mine a couple of days ago.
As has been noted, they come in two pieces. The piece that holds the phone is very, very nice and will definitely work with any reasonable extended battery. It's very snug, but not too snug, and the fit is perfect. I got one of the powered versions and it's fantastic.
The car mount piece, for me, is of similar quality. The fit is near stock and the thing is damn near impossible to remove.
As a unit, the two pieces are rock solid.
Highly recommended. I wouldn't hold out for the Samsung three pin holder. I had that same holder (minus the three pins, obviously) for my Nexus S - and this one is far, far, far better.
roachdabug said:
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Click to expand...
Click to collapse
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
roachdabug said:
the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly.
Click to expand...
Click to collapse
That's what I had to do for my wife's Civic. She got the car mount that affixes to the center console and that one piece of double sided tape just wasn't cutting it. I used a heat gun to remove the factory tape and then liberally applied tape to all parts contacting the console. It's been holding steady for over a year.
Proclip should probably give people more sticky tape - but I think the reason they only use a single piece is because they tout that the proclip doesn't damage the car and it could be argued that uber liberal amounts of double-sided sticky tape could potentially damage some surfaces. In the civic it’s all plastic so it’s NBD to use a heat gun and remove any residue, but if was a BMW with an oak dash then I could see people complaining.
dgwood12 said:
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I don't think any case would work with the proclip because it is a very snug fit and yes it takes a fair amount of pressure to put it in. Not so much that it will move the dock but certainly enough to keep the phone from coming out accidentally.
The only reason the extended battery works is because there is nearly a 1 inch opening behind the phone and the battery cover does not extend to the edge.
Yes the headphone jack is open but you would need a connector that is straight. A 90 degree connector would not work.
I have found that the magnets are more than strong enough to hold the N5 on the iMagnet Car Mount. It works amazing, even with my case (Spigen Ultra Fit) I'll try and get some pictures up soon.
http://goo.gl/rQ08QX (Amazon Link)
Shampuu said:
I have found that the magnets are more than strong enough to hold the N5 on the iMagnet Car Mount. It works amazing, even with my case (Spigen Ultra Fit) I'll try and get some pictures up soon.
http://goo.gl/rQ08QX (Amazon Link)
Click to expand...
Click to collapse
Does it affect the phone when using it as a navigation device? Can you get a GPS lock, and are there any issues with the compass?
Not at all, I had no issues getting a lock. Used it over Thanksgiving on a 5 hour drive.
thompsos said:
Does it affect the phone when using it as a navigation device? Can you get a GPS lock, and are there any issues with the compass?
Click to expand...
Click to collapse
Not at all, I had no issues getting a gps lock. Used it over Thanksgiving on a 5 hour drive.
Shampuu said:
I have found that the magnets are more than strong enough to hold the N5 on the iMagnet Car Mount. It works amazing, even with my case (Spigen Ultra Fit) I'll try and get some pictures up soon.
http://goo.gl/rQ08QX (Amazon Link)
Click to expand...
Click to collapse
so are you attaching a magnet to your device or using the magnets built in to the phone?
bittermormon said:
so are you attaching a magnet to your device or using the magnets built in to the phone?
Click to expand...
Click to collapse
I am using the built in magnets, it works great with a slim case. I only have one case so I haven't been able to test it with thicker cases, but the magnets on the N5 seem pretty strong. The kit comes with slim magnets that fit in between a case if the built in magnets aren't strong enough.
Shampuu said:
I am using the built in magnets, it works great with a slim case. I only have one case so I haven't been able to test it with thicker cases, but the magnets on the N5 seem pretty strong. The kit comes with slim magnets that fit in between a case if the built in magnets aren't strong enough.
Click to expand...
Click to collapse
The N5 doesn't have magnets. It's has steel discs. The magnets need to be in the stand/cradle for the N5 to hold onto it.
kidgenius said:
The N5 doesn't have magnets. It's has steel discs. The magnets need to be in the stand/cradle for the N5 to hold onto it.
Click to expand...
Click to collapse
Steel discs?? Right, the iMagnet is a larger magnet which attracts the "steel discs" on the back of the N5.
Shampuu said:
Steel discs?? Right, the iMagnet is a larger magnet which attracts the "steel discs" on the back of the N5.
Click to expand...
Click to collapse
Yes. That's exactly what is going on.
Notice in the pictures, that to get an iPhone to work, you need to put the included steel disc between the iPhone and the case? Steel is attracted to a magnet. The big fat magnet is in the base, not in the provided discs nor phone (N5).
Try taking a paper clip to the back of your N5. It won't stick (except to the vibe motor, maybe, and possibly the lens). Those are discs in the phone back, not a magnet. Four magnets that thin would not be strong enough to hold the phone up.
Is that hard to believe or something?
kidgenius said:
Yes. That's exactly what is going on.
Notice in the pictures, that to get an iPhone to work, you need to put the included steel disc between the iPhone and the case? Steel is attracted to a magnet. The big fat magnet is in the base, not in the provided discs nor phone (N5).
Try taking a paper clip to the back of your N5. It won't stick (except to the vibe motor, maybe, and possibly the lens). Those are discs in the phone back, not a magnet. Four magnets that thin would not be strong enough to hold the phone up.
Is that hard to believe or something?
Click to expand...
Click to collapse
I just assumed they were magnets from what I had read. I used thin neodymium disc magnets for a palm wireless charging mod on my GS3. I figured it was the same. Regardless, the N5 built in steel discs work well with the iMagnet.
Shampuu said:
I just assumed they were magnets from what I had read. I used thin neodymium disc magnets for a palm wireless charging mod on my GS3. I figured it was the same. Regardless, the N5 built in steel discs work well with the iMagnet.
Click to expand...
Click to collapse
Definitely not magnets. To test, take your phone and try sticking it to your refrigerator...
Having magnets in the phone causes all sorts of weird issues....like keys in your pocket sticking to your phone. Not a good thing.
It's good to hear that the mount functions well though.
Recently, I've been getting annoyed with using my Kenu Airframe/Samsung Car Mount having to keep slipping on and off buttons or pushing my mount aside to slip in my phone.
So, I've been reading about the magnetic feature in order to activate the Car Mode/Desktop Mode on our Moto X. So I attempted to build a Magnetic Car Mount this weekend.
I realized that the Moto X itself had a metal band that would activate the Car Mode, however it wasn't strong enough to hold with my Magnet, so I had to place metal plate into a case and put the phone in, which that worked flawlessly. However, the metal plate bulged everywhere so the phone wasn't nice to hold anymore.
Luckily, my dad is a welder, and I worked on molding the metal plate with him, and decided I disliked my Diztronic Frost Case (On the side note, I liked the Matte Black Best). So, I decided to cut a piece out of my Diztronic case that fit with my metal plate. So now the plate curved with the case!
I inserted the metal plate into the cut out, glued it in place, and my roughly build case with a metal plate works like a charm with my Magnetic Mount setup with my Kenu Airframe. I gotta say it's one of the nicest things not to have to fiddle with anything and just take your phone off with a quick snap. This all cost me about $5 + $25 (Which is the Airframe). I'm ordering a new case and Mountek Metal Plating to reduce the thickness hoping that I won't have to cut an insert, but we'll see in the following days. I'll update it when I receive the plates.
I went autocrossing with my car, phone mounted my magnetic mount and at speeds and curves of 60-70 MPH, this thing stuck like glue!
Very pleased overall. Hopefully some of you guys will steer clear from the Griffin Dock for our phones and custom build your own mount
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
1454 said:
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Kenichi said:
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Click to expand...
Click to collapse
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
1454 said:
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Kenichi said:
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Click to expand...
Click to collapse
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
1454 said:
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I have been using magnetic mounts since my OG Droid. It is nice to see Moto reverted back to magnetic activation of dock mode instead of their smartdocks. I have noticed Moto has switched the polarity of the magnet's activation of car/desk dock modes from the OG Droid. I have an RND dock at home that I glued a magnet to. It automatically activates Daydream when docked. My next project is modifying the RND dock to include HDMI out and USB OTG capability.
Hi, is anyone using one of these magnetic car mounts/holders? The ones where you put a magnetic plate between your phone and a case? My concern is that because the back of opt is not completely flat, it may not hold it securely.
Sent from my ONE A2003 using Tapatalk
Hi, i have one but stopped using it as my backcover fell of one time. The metal plate is a bit too wide... I will cut it smaller to solve the problem. Should work then! The magnetic power is strong enough even through the backcover (tested with Original, Carbon and Rosewood).
I use one and love it! I had to cut it to fit in the flatter area of the phone but it still works great. It works better with the sandstone back than the others.
I have the infini-apps one from Amazon. I actually met the owner of the company randomly one day when he noticed it in my car while walking by haha. Really nice guy and they are supposedly the original ones to make the mounts.
ramdyc said:
I use one and love it! I had to cut it to fit in the flatter area of the phone but it still works great. It works better with the sandstone back than the others.
I have the infini-apps one from Amazon. I actually met the owner of the company randomly one day when he noticed it in my car while walking by haha. Really nice guy and they are supposedly the original ones to make the mounts.
Click to expand...
Click to collapse
Please, share a link of your magnetic holder
Maxximo88 said:
Please, share a link of your magnetic holder
Click to expand...
Click to collapse
I use a CD slot one:
https://www.amazon.com/gp/aw/d/B00D...infiniapps&dpPl=1&dpID=41n9mJjjvjL&ref=plSrch
I personally have the older version with the neck that comes out but there newer one (the one I linked to) is supposed to be much sturdier. Also, not very useful for us OP2ers but when I met the owner he said wireless charging ones are coming next.
Ok, so I bought one of these:
http://m.ebay.co.uk/itm/Universal-A...r-iPhone-Samsung-HTC-/191881646638?nav=SEARCH
Good thing is that the magnetic plate actually fits under the styleswap cover! So far so good, phone seems secure enough.
Sent from my ONE A2003 using Tapatalk
What is everyone using?
My old side spring grip style one isn't going to work. I love the thing but it either presses on the volume buttons or activates Assistant. Have any of you found one that works without these issues?
I'm considering one of the magnetic ones but I don't like the idea of having to add a piece of metal to the back of my case.
Any success stories?
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Sent from my Pixel 2 using Tapatalk
Izeltokatl said:
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Click to expand...
Click to collapse
That is pretty cool. Make a good Xmas gift too.
Izeltokatl said:
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
I really like the looks of those! Very clean.
Have you had any issues with the phone wanting to spin on the mount?
Thanks,
Jared
I'm waiting for my Pixel 2 to arrive, but I use a Spigen Magnetic Mount for my air vent currently. They offer a windshield/dash mount also. It holds very tight, but not too tight. No issue with the phone falling and/or rotating during driving.
I'm wondering if any of the Spigen cases will work without the need to put the metal plate inside. I currently have the metal plate inside the back cover of my Galaxy S5, but I can tell there is a bulge where it is placed.
I'm on the list to be notified when these release. By far the best holder charger combo I've ever used https://www.proclipusa.com/category/google-pixel-2
Can't tell you how disappointed when I popped my new phone into the dash mount only to watch the volume drop on it's own. The volume rocker placement on the Pixel 2 leaves a lot to be desired. I'm not a huge fan of magnets interfacing with computers to be honest. Hope I can find a decent alternative.
I use the Tetrax, both the Fix and Xway. Most of the time I use the Fix, because I like having my air vents actually blowing air on ME, but in the summer, on a long drive, using the GPS and charging the device, it can sometimes get warm. I just take it off the Fix, and move it to the air vent to let the air conditioner cool it down. I've used this system for nearly a decade, not sure if the Pixel 2 will get warm enough to need the air vent.
The only thing you need to put on the phone is a small metal button. The package comes with several sizes. I adhere this to my Spigen Thin Fit case, so it doesn't have to be attached to the actual phone.
http://store.tetrax.us/en_us/featured/tetrax-fix.html
http://store.tetrax.us/en_us/featured/xway.html
ClutchIT magnetic mount system.
krelvinaz said:
That is pretty cool. Make a good Xmas gift too.
Click to expand...
Click to collapse
I got two of these yesterday, one for me and another for a Xmas gift.
Works great. I have had co-workers, friends and family who have seen it, express interest in getting one for themselves.
I order 6 extra plates to go with each unit. It already comes with several extras. I have only used one plate so far because a allot of places I will use it are metal surfaces.
I put the thin disc on the back of my phone and put my case back on. Nothing to see until I actually use it.
Good mount.
https://clutchit.com
Ok
Brodit
Adjustable active Brodit + ProClip :good:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Shibang said:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Click to expand...
Click to collapse
I second this, I find the magnetic car mount is by far the best I've ever used, the one i previously used, used to activate active edge or turn volume down, which was quite annoying.
Scosche
I was using Scosche before Brodit.
awesome