[ROM] Stock 30a/30b/30d/30e/30f-eur/30f-vdf/30h-vdf - flashable zip [20160528] - NEW!

[ROM] Stock 30a/30b/30d/30e/30f-eur/30f-vdf/30h-vdf - flashable zip [20160528] - NEW! - G2 Android Development (D802)

New build from D80230a/D80230b/D80230d/D80230e/D80230f
Still has recovery after flash.
Please Checking MD5 checksum before Flash...
For The guys from EUR zone I made flash able ZIP for a new KDZ please visit this thread as below
[ROM] SRKG2-1-00 (ESA/EUR) [3 In 1 ROM with Thai Food Names] - 20150517
Don't ask about what different between the previous version I don't have any change logs.
Download link
SRK-D80230F-EUR_20160528_droidth (NEW) Please read instruction as below for new build:
https://www.androidfilehost.com/?fid=24562946973630919
SRK-D80230H_20160107_droidth:
https://www.androidfilehost.com/?fid=24352994023707839
SRK-D80230d_EUR_20151124_droidth:
https://www.androidfilehost.com/?fid=24269982087003734
SRK-D80230f_20150926_droidth:
https://www.androidfilehost.com/?fid=24052804347822701
SRK-D80230e_20150417_droidth:
http://bit.ly/1b1BA2H
Download link
SRK-D80230d_20150403_droidth :
http://bit.ly/1ENqBXF
Download link
SRK-D80230b_20150425_droidth:
http://bit.ly/1bELkB0 - google drive mirror1
http://bit.ly/1IWE7qf - google drive mirror2
http://bit.ly/1JEX5BL - google drive mirror3
http://bit.ly/1E4uu7D - mirror MEGA1
http://bit.ly/1Gu9JmR - mirror MEGA2
Bittorrent format
https://www.androidfilehost.com/?fid=96042739161893331
(Unzip SRK-D80230b_20150425_droidth.zip then use bittorrent to Download)
Download link
SRK-D80230a_20150403_droidth:
http://bit.ly/1yIejs7
Download link
SRK-D80230a-SG_201500505_droidth (SEA) :
https://www.androidfilehost.com/?fid=23991606952597843
Mirror torrent file :
- D80230a
- D80230a
- D80230d
- D80230e
If you like my work , you can donate me with my email in paypal
My email : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mirror link :
- https://mega.co.nz/#F!Fg9URAbS!EhGVUeuzaQg0-uMX0_puMw (SRK-D80230a_20150403_droidth,SRK-D80230d_20150403_droidth)
From Member of my fackbook Fanpage @radoslaw Rusin @reza Sadeghi
SRK-D80230e_20150417_droidth.zip
https://mega.co.nz/?hc_location=ufi#!0EMDwCRT!07XccJVFYLu0_WcyEEbuTnlgeVWGuZEJgGaSuCC6NtY
http://fs2.filegir.com/gladiators1980/SRK-D80230e_20150417_droidth.zip?hc_location=ufi
Thank, @hockh @fuxmen, @mooncrown_ksk
File: SRK-D80230a_20150403_droidth.zip
MD5 checksum: 0BD1154DC296C73AE1061AED41FE4D53
File: SRK-D80230b_20150425_droidth.zip
MD5 checksum: FA96651705BEC42A23525652EC80DD4A
File: SRK-D80230d_20150403_droidth.zip
MD5 checksum: 95D9E126FA87A1A4F8C2F1CD5A33701E
File: SRK-D80230e_20150417_droidth.zip
MD5 checksum:15243a03c33c57fead73ddce1638b934
File: SRK-D80230f_20150926_droidth.zip
MD5 checksum:db2daa234e6fe50b6cb84f1d1736558d
MOD by @glfsd
http://forum.xda-developers.com/lg-g2/themes-apps/d802-lollipop-theme-original-firmware-t3071485
D802 - Bump Stock LP 30a,30b,30d,30e,30f,30h:
https://www.androidfilehost.com/?w=files&flid=31132
D802 - LP BaseBand 30a,30b,30d,30e,30f,30h:
https://www.androidfilehost.com/?w=files&flid=31134
Change logs:
- Rooted
- Remove all Vodafoneblotware
- Bump kernel 30d/30a
- Fix Battery
- Still have TWRP Recovery Bump 2.8.6.1
- Add SELinux Mode Changer
- Smoothy / Fast / Stable
- Hide Home touch buttons
- Combination key enter to Recovery
- Can flash on Jelly Bean or KitKat ROM
- Lte Support
BACKUP DATA BEFORE INSTALL ROM AND MAKE SURE YOU HAVE THE LASTEST VERSION......
New instructions FOR SRK-D80230F-EUR_20160528_droidth.zip
1. downlaod ROM
2. download 01-CustomPatcherScript_Bump.zip
https://onedrive.live.com/redir?resid=F8CABDE84AF2675E!4276&authkey=!AJCH2nNZUVGRxBI&ithint=file,zip
3. download 02-BETA-SuperSU-v2.67-20160121175247.zip
https://onedrive.live.com/redir?resid=F8CABDE84AF2675E!4275&authkey=!AM1CLoezpWOl9mk&ithint=file,zip
4. reboot to TWRP
5. install ROM (after finished don't reboot system)
6. install 01-CustomPatcherScript_Bump.zip
7. install 02-BETA-SuperSU-v2.67-20160121175247.zip
8. reboot
if you forget install 01-CustomPatcherScript_Bump.zip and 02-BETA-SuperSU-v2.67-20160121175247.zip, then you got bootloop, please go back to TWP and then install both files and reboot again
How to install
1. Copy ROM into SDCARD
2. Reboot to Recovery
3. Wipe (System,cache,dalvik,data)
4. Install ROM
5. Reboot
6. Enjoy
How to Go back to KK (Install ROM or Restore KK image)
- D802_PATCH_RETURN_KK_droidth.zip
http://bit.ly/1LJG52P
1. Reboot to Recovery (Base on TWRP Recovery)
2. Flash D802_PATCH_RETURN_KK_droidth.zip > Home
> Choose Reboot > reboot to Recovery again
3. Depend on situation
3.1 You want to restore KK image
- Restore KK Image (Go to 4.)
3.2 You want to install KK Custom ROM
- Wipe (system\data\dalvik and cache)
- Flash KK Custom ROM
- Flash ASOP KK BaseBand (For ASOP Custom ROM)
4. Reboot
How to Restock LP image (When current ROM is KK)
-D802_PATCH_GO_LP_V1.1_droidth
https://mega.nz/#!YNMmWKoJ!h2siD4om0jKPkrTA4mSpCrdHvMBIY3Bv3aXIQxMDKQo
1. Reboot to Recovery (Base on TWRP Recovery)
2. Flash D802_PATCH_GO_LP_V1.1_droidth.zip > Home
> Choose Reboot > reboot to Recovery again
3. Flash your Custom Recovery that you use backup your ROM before go back to KK
Then choose reboot to recovery again
4. Restore LP image
5. Reboot
How to enter to recovery
1. Turnoff G2
2. Press Power + Vol down button Until LG Logo appear
3. Release 2 button immediately 1-2 sec. then press 2 button again Until appear white screen
4. Choose Yes (Use Vol. Key to choose,Use Power Key to select) 2 times it will be enter to recovery
How to solve problem with Boot stuck on LG Logo
(In case wipe internal storage)
1. Return to Recovery again
2. Choose Wipe > Format > type yes
3. Reboot
FOR Charging bug
Don't worry about this bug.It will be resolve by @dorimanx for comming soon.
It's auto, from 300 to 1500 as kernel decides. Its random..
PLEASE DON'T ASK THIS QUESTION
What's the difference between 30a and 30d?
30a is Italy/international version and 30d is the vodafone version but both are the same except one 30a is just without the Vodafone stuff @Supracer
Thank,
@blastagator Bump TWRP
@topet2k12001 How to add Bump TWRP
For people who can answer the question in my thread please help me answer too,I can't answer or see all question because I have so many question in Thread/inbox xda/Q&A thread/facebook fanpage/inbox facebook fanpage/facebook group and I have so many work in my office.I can't answer for all question.I apologize for it.
Thank you,
ขอบคุณครับ (In Thai language)
[LG2-D802] Step by Step install Official Lollipop firmware via Flash-able Zip
[LG2-D802] Step by Step install Official Lollipop firmware via Flash-able Zip

What about flashing bumped recovery right after flashing this zip to keep the recovery? Is it possible?

Somboons fantastic job! Super Fast! It would be possible to make a flashable zip with the new OPEN V30A of Portugal? Thus avoided blotware Vodafone, we would have a cleaner ROM Thanks

Kael710 said:
What about flashing bumped recovery right after flashing this zip to keep the recovery? Is it possible?
Click to expand...
Click to collapse
Now I have TWRP Recovery.it can use combinationkey. I will be upload tonight.the link can public tomorrow

Can i flash this over cloudyflex 2.7? My phone is 32g d802 with the autorec on it.

flashed this (without flashing TWRP) and got into bootloop had to CSE flash KDZ

Actually im using cyanogenmod 12. Can i flash this ROM with no problems? Thanks
Sent from my SM-N910F using XDA Free mobile app

somboons said:
Now I have TWRP Recovery.it can use combinationkey. I will be upload tonight.the link can public tomorrow
Click to expand...
Click to collapse
We will be waiting. Please use an open rom, not vodafone . Thanks so much.

Rivafe said:
Actually im using cyanogenmod 12. Can i flash this ROM with no problems? Thanks
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
insalled 10 minutes ago over cm12 (wiped data, formated system & cache), booted up without a problem

Can i flash this ROM with TWRP? Thanks
Sent from my LG-D802 using XDA Free mobile app

Rivafe said:
Can i flash this ROM with TWRP? Thanks
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
worked for me

Rivafe said:
Can i flash this ROM with TWRP? Thanks
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
If u can, read first post and answer himself.

legola said:
Can i flash this over cloudyflex 2.7? My phone is 32g d802 with the autorec on it.
Click to expand...
Click to collapse
Yes ,you can .please use TWRP the latest version

TiagoEsteves said:
It would be possible to make a flashable zip with the new OPEN V30A of Portugal? Thus avoided blotware Vodafone, we would have a cleaner ROM Thanks
Click to expand...
Click to collapse
+1 :good:

I ' m working how to install TWRP on lollipop ROM for all varaint.
If I can prove it I will create thread to guide.

So to get this correctly...with latest twrp on D802 you wont lose custom recovery after flashing??

pikachukaki said:
So to get this correctly...with latest twrp on D802 you wont lose custom recovery after flashing??
Click to expand...
Click to collapse
TWRP IS costum recovery. If you don't flash TWRP you'll have STOCK recovery.

klemenSLO said:
TWRP IS costum recovery. If you don't flash TWRP you'll have STOCK recovery.
Click to expand...
Click to collapse
You can't flash this without twrp...im asking if this zip cause the custom recovery to be lost...

pikachukaki said:
You can't flash this without twrp...im asking if this zip cause the custom recovery to be lost...
Click to expand...
Click to collapse
Yep, if you flash this ROM trough custom recovery, you'll we lost your custom recovery, BUT, if you got international version of G2 (D802), you can use this tutorial -> http://forum.xda-developers.com/lg-g2/development/guide-bumpedtwrp-recovery-stock-v30d-t3070365 to get it back (thanks @wolfgart by the way)

vesi said:
+1 :good:
Click to expand...
Click to collapse
I can do it,please check for me it have Thai language.?

Related

[ROM][C6903][LB&UB]z1slim v0.4[4.3][NO BLOAT][FULL ROOT][XZDR][09/01]

Reserved.

Good to see more DEVS here and there, let me give you an advice, people will not go back to 534 if they're already in .290 with working recovery, because i didnt go back to 534 since the first semi-rooted 290 i had to always flash the flashable recovery that i had! now if you read the NUT thread you can figure out that if you already have a working recovery or you were on any 290 from iHackers or ROMAUR or even Monx you'll be able to just flash the update zip that is in the NUT to get Full ROOT!
anyways that was only my opinion
Thanks and good luck.

Nice mate.
You are not taking anything more than others who are posting stupid things like - "new album upgrade".
Learn and upgrade your ROM, we need good guys here.
Maybe this isn't heavy development but it's one step up and I'm 100% sure it'll be great ROM one day.
You are creating something new, unlike some others guys who are constantly whining and doesn't contribute this community at all.
BTW what @Simow.b saying is correct, you should add that in OP.
Just write: if you are already on 290 or any ROM with working recovery just flash ROM through recovery, flash recovery, power of, flash ftf and restart.
:thumbup:
Sent from my C6903 using Tapatalk

funky0308 said:
Nice mate.
You are not taking anything more than others who are posting stupid things like - "new album upgrade".
Learn and upgrade your ROM, we need good guys here.
Maybe this isn't heavy development but it's one step up and I'm 100% sure it'll be great ROM one day.
You are creating something new, unlike some others guys who are constantly whining and doesn't contribute this community at all.
BTW what @Simow.b saying is correct, you should add that in OP.
Just write: if you are already on 290 or any ROM with working recovery just flash ROM through recovery, flash recovery, power of, flash ftf and restart.
:thumbup:
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Thank you for the kind words my friend

Simow.b said:
Thank you for the kind words my friend
Click to expand...
Click to collapse
We have to support guys who are willing to take their free time and work for us - free.
Someone will make something smaller, someone will make something big - but that's not important, what's important is that they are trying and learning and that's great.
Sent from my C6903 using Tapatalk

funky0308 said:
We have to support guys who are willing to take their free time and work for us - free.
Someone will make something smaller, someone will make something big - but that's not important, what's important is that they are trying and learning and that's great.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
I agree with that !

Simow.b said:
Good to see more DEVS here and there, let me give you an advice, people will not go back to 534 if they're already in .290 with working recovery, because i didnt go back to 534 since the first semi-rooted 290 i had to always flash the flashable recovery that i had! now if you read the NUT thread you can figure out that if you already have a working recovery or you were on any 290 from iHackers or ROMAUR or even Monx you'll be able to just flash the update zip that is in the NUT to get Full ROOT!
anyways that was only my opinion
Thanks and good luck.
Click to expand...
Click to collapse
So is there way to get recovery back I run ihackers but I don't see any recovery?

adamo86 said:
So is there way to get recovery back I run ihackers but I don't see any recovery?
Click to expand...
Click to collapse
Try to flash the latest windows recovery from NUT and follow the steps:
1- Make sure you have USB debugging turned ON.
2- download XZ/ZL/TabZ/Z1/ZU-lockeddualrecovery[VERSION]-BETA.installer.zip from http://nut.xperia-files.com
Windows:
3- unpack at C: or somewhere you will remember!
4- navigate to the resulting directory and look for install.bat, double click it to run;
let me know if this worked for you

Simow.b said:
Try to flash the latest windows recovery from NUT and follow the steps:
1- Make sure you have USB debugging turned ON.
2- download XZ/ZL/TabZ/Z1/ZU-lockeddualrecovery[VERSION]-BETA.installer.zip from http://nut.xperia-files.com
Windows:
3- unpack at C: or somewhere you will remember!
4- navigate to the resulting directory and look for install.bat, double click it to run;
let me know if this worked for you
Click to expand...
Click to collapse
I can't see the version you mentioned in the link.
I'm on LB so would it work I have partial root though.

adamo86 said:
I can't see the version you mentioned in the link.
I'm on LB so would it work I have partial root though.
Click to expand...
Click to collapse
i'm also on LB here's the windows version
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuaW5zdGFsbGVy
and after that flash this:
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuZmxhc2hhYmxl
you could always try my friend if it doesnt work then you should do the steps again from 534 but this time when installing the recovery install the one that i have posted now.

Simow.b said:
i'm also on LB here's the windows version
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuaW5zdGFsbGVy
and after that flash this:
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuZmxhc2hhYmxl
you could always try my friend if it doesnt work then you should do the steps again from 534 but this time when installing the recovery install the one that i have posted now.
Click to expand...
Click to collapse
I won't fall any boot or brick problems would I.thanks

adamo86 said:
I won't fall any boot or brick problems would I.thanks
Click to expand...
Click to collapse
if everything's goes well then you will get a fully working recovery plus a nice full rooted ROM!
if not then you should just do the steps from NUT thread and you'll be fine

Simow.b said:
if everything's goes well then you will get a fully working recovery plus a nice full rooted ROM!
if not then you should just do the steps from NUT thread and you'll be fine
Click to expand...
Click to collapse
Link please

adamo86 said:
Link please
Click to expand...
Click to collapse
Here you go :
http://forum.xda-developers.com/showthread.php?t=2572988

Simow.b said:
Here you go :
http://forum.xda-developers.com/showthread.php?t=2572988
Click to expand...
Click to collapse
Didn't work the phone reboots back up dosent go into recovery.

Jonster111 - Nobody is forcing you to click on this thread or download this ROM. It is quite apparent what it is from both the thread title and the description in the first post.
Thanks Simow.b and funky0308 for the real support
Who knows, maybe this will one day be a base for a proper modified rom. Until then, I still need to remove the useless rubbish!
----
Ive just noticed that its not really got full root so have to fix that too. Cant mount system R/W but have got latest XZDR... Weird.

adamo06 please follow the guide in [NUT]'s thread properly. You need to download the 534 version from his OP to get the rom to install properly, or at least have a rooted 257 with recovery already. Also, please take discussion about that to the appropriate thread.

adamo86 said:
Didn't work the phone reboots back up dosent go into recovery.
Click to expand...
Click to collapse
Follow my steps then:
1- flash 534 using flashtool
2- root it using bin4ry's tools
3- install NUT recovery (the ones that i have given) install windows version and when you're on the recovery flash the one that is flashable! do not reboot!
4- flash the 290 from any DEV i would recommend iHackers v2.0 do not reboot!
5- flash xposed for lb from Monx and again (do not reboot! )
6- flash the update zip for 290 from NUT thread
7- wipe cache/dalvik
8- power off the phone from recovery
9- flash the kernel for 290
10- boot the phone and wait!
Hope this helps now
---------- Post added at 03:00 PM ---------- Previous post was at 02:58 PM ----------
GavTheStoner said:
Jonster111 - Nobody is forcing you to click on this thread or download this ROM. It is quite apparent what it is from both the thread title and the description in the first post.
Thanks Simow.b and funky0308 for the real support
Who knows, maybe this will one day be a base for a proper modified rom. Until then, I still need to remove the useless rubbish!
----
Ive just noticed that its not really got full root so have to fix that too. Cant mount system R/W but have got latest XZDR... Weird.
Click to expand...
Click to collapse
You're always welcome my friend

Version 0.2 was pulled due to a fatal bug.
Version 0.3
-Removed further O2 customization
+Added social network integration again as it broke the ROM
+Adblock hosts file
+Customized the install script

[ROM][Stock Lollipop] SRKROM 2.1 [D802/5][PORT GPRO2 F350K] - 16/3/2015

I'm not responsible for any damage what-so-ever done to your phone, as with any ROM, you accept this risk.
This ROM is port from LG G pro2 F350K20b.
Change log 2.1 :
1. Port from LG G pro2 F350K20b.
2. Debloat
3. Animation memory leak
4. Fix NFC (Maybe Not stable But can use)
5. Fix Maximum Battery to 3000
6. init.d support
7. L Tewak+Build.prop
8. Support D802/D805
9. KK Bootloader packaging
10. 4K,Slow motion mode
Click to expand...
Click to collapse
For D805 PLEASE .. read instruction before flash ROM
Thank @renzo090513 , D805 user who help me testing ROM.It is working.
Before you decide to flash this ROM please make sure you can get previous ROM (backup/restore)
...
Download link (Google Drive) : http://bit.ly/18t2kbb
Download link (MEGA) : http://bit.ly/1EoVoqA (Thank Loy Daniot Bensig FB member for mirror)
Download link (uptobox) : http://bit.ly/1MEqfDA (Thank @blackcodetech)
Size ; 1.13 GB
MD5 : 4F4D197A3141C6794AC7C15A28062488
...
...
Note : Recommend Wipe (system\data\dalvik and cache)
...
Please read completely 3 path
Install,Go back old backup,flash stock firmware
A. Install ROM
1. Download
- D802_PATCH_GO_LP_droidth.zip
http://bit.ly/1MX6U0l
- D802_PATCH_RETURN_KK_droidth.zip
http://bit.ly/1LJG52P
- ROM as link above
Then copy to SDCARD
- LP_Baseband_D805ByZbzG.zip (For D805 user only)
https://mega.co.nz/#!DdM0AZDA!o1gM4xWigcv3dyy4e7Ofz5589w7-iyfd9g9MjWBYFys
2. Reboot to Recovery
3. Backup your current ROM
4. Flash D802_PATCH_GO_LP_droidth.zip
5. In TWRP Bump MUST FULL Wipe (system\data\dalvik and cache)
6. Flash ROM
7. Flash LP_Baseband_D805ByZbzG.zip (For D805 only)
8. Reboot
Click to expand...
Click to collapse
B. Restore to your backup ROM.
How to Go back to KK (Install ROM or Restore KK image)
1. Reboot to Recovery
2. Flash D802_PATCH_RETURN_KK_droidth.zip
3. Go back to KK
3.1 Restore KK image
- Restore KK Image
3.2 Install KK Custom ROM
- wipe (system\data\dalvik and cache)
- Flash KK Custom ROM
4. Reboot
Click to expand...
Click to collapse
C. Go back to Stock firmware (without lost data in sdcard)
1. make sure your Backup ROM is stock LG 20A,20B,20C,20D,20F,20H or your current ROM is stock LG
2. Flash firmware KDZ
3. enter to system
4. enjoy
Click to expand...
Click to collapse
Thank,
kernel from acura2201 : http://www.htcmania.com/

Major Issue
- NFC Maybe not working (Not Stable)
Small Navigationbar .
Thanks, the guys in htcmania forum. http://www.htcmania.com/showpost.php?p=17860091&postcount=6
TIP
How to enable 4k ,and enable slow motion in SRKROM 2.1?
- Change build.prop (ro.product.model=LG-F350K) Then restart the phone.
BuildPrpp Editor App in playstore.
**** Change model will have effect (Wrong Model) for flash firmware KDZ/TOT
How to work with USBOTG.
- Plug USBOTG into G2 . USB OTG Helper it pop up
- Choose mount . Then it will be Mount Start at : /storage/UsbOtg/Drives
- You can use file manager app like root explorer ,es explorer or file manager to browse file in USBOTG

Can I dirty flash over the previous version or not recommended? Great work by the way very nice ROM?

saint_cow said:
Can I dirty flash over the previous version or not recommended? Great work by the way very nice ROM?
Click to expand...
Click to collapse
Not recommend dirty flash.

NFC is still not working. It is ok at first boot, but fail after reboot.

abc001 said:
NFC is still not working. It is ok at first boot, but fail after reboot.
Click to expand...
Click to collapse
Working more than 1 reboot .Maybe it's fail.I will investigate why ?
Thank you for your test.

Back LED not turning on when I unlock the phone by pressing power button.
Sent from my LG-D802 using XDA Free mobile app

Congratulations on your new thread. Rom is enough for daily use. Very smooth stable. I need everything works very well. We just need to FM radio. I congratulate you for this work and look forward to better then :good:

Nice ROM!
But I don't understand why sometimes (like in 1.0.2 version) this ROM have few but annoying lags for 10/15 seconds...any suggestions?

a little more battery life consumed on 2.1 compared to 1.02 ...

Hi!
somboons said:
Thank you for your test.
Click to expand...
Click to collapse
New mirror you can use this too.
http://uptobox.com/ascs9i9isy00

Handsfree speaker call not sound.

for Korean version?

Flashing methods on d802.
Coming frm simple rom v1.2.
Bugs report plz.
Heard Nfc backled does nt wrk?
Battery lyf?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Shalz said:
Flashing methods on d802.
Coming frm simple rom v1.2.
Bugs report plz.
Heard Nfc backled does nt wrk?
Battery lyf?
Click to expand...
Click to collapse
Read instruction.

somboons said:
Read instruction.
Click to expand...
Click to collapse
I read it mahn.
So do a complete wipe excpt sd
Flash rom fr d802
Reboot
Ryt?
Nd wat abt back led during calls and some reboots?

All runing so good so far...only the incoming call tune.! Cant hear it ringing when receiving a call

crazylife said:
All runing so good so far...only the incoming call tune.! Cant hear it ringing when receiving a call
Click to expand...
Click to collapse
Do u mean can't hear phone ringtone ?
It work for me

Shalz said:
I read it mahn.
So do a complete wipe excpt sd
Flash rom fr d802
Reboot
Ryt?
Nd wat abt back led during calls and some reboots?
Click to expand...
Click to collapse
No some reboot .no back led .

[AROMA]3.0.8 Official CrisKelo MultiRom V7.8.1 LB&UB.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
︻╦̴╦═━───━━━✺~CRISKELO THEME~✺━━━───━═╦̴╦︻
⇝CrisKelo Theme⇜
︻╦̴╦═━───━━━✺~CRISKELO MULTIROM~✺━━━───━═╦̴╦︻
No Bugs
IMPORTANT to Know
The OTA-Updater dont work on Z1 with D_Vovan_238 versions, all Updates only on XDA and Official CrisKelo page!
Locked Bootloader
Way 1.
You must install 4.4.4 with Root and CWM. If you don't come from 4.4.4 then
- Install Offical 4.4.4 Firmware. 6903 Firmware
- Root Your Device
- Install CWM
Copy my ROM on your Internal SD Card
Install My ROM with Wipe/Factory Reset
Reboot your Phone
enjoy
Locked Bootloader Root problems Flash >>Su Fix<<
Way 2.
Copy my ROM on your Internal SD Card
Install My ROM with Wipe/Factory Reset
Turn off your Phone and Flash The Stock [.108] Kernel
Reboot your Phone
enjoy
Locked Bootloader Root problems Flash >>Su Fix<<
Unlocked Bootloader
Copy my ROM on your Internal SD Card
Install My ROM with Wipe/Factory Reset
Flash Stock TFT Kernel >>Klick<< or choose Custom kernel in AROMA
Reboot your Phone
enjoy
⇩⇩⇩New Aroma Installer⇩⇩⇩
⇝CrisKelo ♚[AROMA]V3.0.8♚ DOWNLOAD LINK⇜
⇩⇩⇩Mega Cloud Mirror⇩⇩⇩
⇝CrisKelo ♚[AROMA]V3.0.8♚ DOWNLOAD LINK⇜
⇝Official Discussion-Thread⇜
⇩⇩⇩Old Versions⇩⇩⇩
⇝CrisKelo ♚[AROMA]V3.0.7♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.6♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.5♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.4♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.3♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.2♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.1♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.00♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚Aroma2.7MR♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚Aroma2.7S2♚ DOWNLOAD LINK⇜
Simplified Installation Instructions :
1) Download 2 zip installers, first kernel and second Aroma zips.
2) Flash Downloaded MultiBoot Kernel, Reboot in to MultiRom TWRP by tapping camera button after first vibration.
3) Run Aroma Installer WITH "INJECT MULTIROM AFTER INSTALLATION" FUNCTION ENABLED, AND CHOOSE TRINITY MULTIBOOT KERNEL INSIDE AROMA INSTALLER!
In the rest of options follow Aroma Installer wizard
4) Enjoy
⇝CrisKelo ♚V7.8.1♚ Rom DOWNLOAD LINK⇜
⇧⇧⇧All Modifications Aroma Installer!!!⇧⇧⇧
⇝CrisKelo Simplified MultiRom DOWNLOAD LINK⇜
Recovery Themes
All TWRP recovery themes and configurations will be applied automatically.
But you must apply the Philz recovery settings manually.
Go to Philz recovery settings, backup/restore settings, then choose restore theme and finally restore theme and settings.
Done, we have the best settings and recovery theme. The background will change acording with the kernel that you selected from AROMA INSTALLER
Some apps and xposed modules added.
All recoveries updated, including Nut dual recovery solution.
And that's all for locked bootloaders :?
Unlocked Bootloaders
MultiRom Installation Guide :
WARNING: Read and Follow my installation instructions! I'm not responsible for bad or inappropriate use of my works! You are installing it for your own risk. If you will correctly follow my instructions all will work good and you will don't need PC. Allways make nandroid backup, just incase.
Installation Procedure :
1)Download the latest AROMA INSTALLER and install it with full wipe, choosing the Trinity MultiBoot Kernel, without DATA RESRESTORE.
It will also install support for Rom and extract all necessary Files to /sdcard1/0-MultiRom folder .
2)Boot up the Android,connect to the internet and run multirom app.
Allow it root access , download and install all necessary files. When it finish, It Will Ask for reboot in recovery to complete installation, CHOOSE "NO".
IF YOU REBOOTED THAN REFLASH TRINITY MULTIBOOT KERNEL, from 0-MultiRom folder, DO NOT REBOOT WITHOUT REFLASHING KERNEL, OR IT WILL NOT BOOT !!!
In case IT NOT BOOT you must FASTBOOT FLASH BOOT BOOT.IMG with Windows command line, to bring your device life again.
3)Shutt down your device , than boot it in MultiRom TWRP Recovery by pressing camera button or rebooting in recovery with Philz recovery .
Go to /sdcard1/0-MultiRom folder and install :
Check the option "Inject MultiRom After Installation ", it must be ENABLED!
FLASH :
1)MultiROM-v30x-180115-UNOFFICIAL-honami.zip, do not REBOOT OR IT WILL NOT BOOT!
Check the option "Inject MultiRom After Installation ", it must be ENABLED!
Then you have two Kernel installers for flash :
2)LTrinityUltimateKernel_V3.2_by_D_Vovan_238.zip - by all buttons you will enter in Philz Recovery.
2)ULTrinityUltimateKernel_V3.2_by_D_Vovan_238.zip - you can enter MultiRom TWRP Recovery by camera button pressing.
4)And finally boot in to your New CrisKelo MultiRom V7.8!
5)Enjoy
For correct functionality of all secondary roms check MultiRom settings, Enable ADB must be enabled, otherwise you will always getting problems with your secondary Roms!
If some secondary Rom get stuck, sometimes it happens, will be impossible to boot nothing apart recoveries. Boot in to MultiRom TWRP and repeat step number 3) of my installation guide. Now MultiBoot is restored . Stucked secondary Rom will also not work, to restore it simply reflash Rom and optionally Gapps zip installers, DONE ALL RESTORED
You will also find init.d script zip installers in /sdcard1/0-MultiRom/MountingScripts folder.
There are 3 installers for mmcblk1p2, mmcblk1p3 and mmcblk1p4 mount. So you can use it for External Secondary Roms installation or like EXT4 storage
But first you must prtitionate your Micro SD Card with mini partition tool, than install script acording with your SDCard partitions.
You can even install external roms on USB OTG Disks, FAT32(vfat) formatted
You will also find MultiRom uninstaller zip in 0-MultiRom folder, if you want to remove it.
Remember ALWAYS REFLASH KERNEL After actions with MultiRom, like installing, reinstalling or uninstalling MultiRom !!!
This way you ensure that it will 100% boot up other time!
No need to Reflash Kernel after secondary rom installing
⇝CrisKelo MultiRom DOWNLOAD LINK⇜
︻╦̴╦═━───━━━✺~CRISKELO ROM~✺━━━───━═╦̴╦︻
First unofficial update for CrisKelo rom available for download.
Installer version 2.3.7 will update your ROM to unofficial 7.6.3a version.
My first AROMA INSTALLER V 2.4.7 Done
It will update your ROM to unofficial CrisKelo 7.6.7a version.
It's edited CrisKelo AROMA INSTALLER (I will spend very much time to make new like CrisKelo's)
LOCKED AND UNLOCKED BOOTLOADERS
INSTALLATION GUIDE :
1)Make NANDROID BACKUP of whole system (just incase), and later we will need data backup!
2)Reboot your phone to recovery.
3)Install the update choosing first option, with wiping all system. If you choose second option, customize your rom, NO ROM UPDATE, NO ANDROID PATCHES AND NO MODDED PLAYSTORE WILL BE INSTALLED.
4)Reboot in to recovery, and select costume restore and RESTORE ONLY DATA! IF YOU WILL RESTORE SYSTEM ALL CHANGES WILL BE ELIMINATED!!!
5)Finally boot in to android.
6)ENJOY FREEDOM
⇝OLD DOWNLOAD LINK⇜
♔CHANGELOG♚
AROMA v2.4.7 Unofficial CriskeloROM v7.6.7a
By D_Vovan_238
⇝ Aroma Installer Added
+ All Kernels Updated
+ Android Patches Added
+ Modded Playstore Added
+⇩ All Kernel Recoveries Updated⇩
⇝Ported from newest NUT Kernel⇜
+ Nut DualRecovery Solution Updated
+ Gps Configuration Added
+ Framework Animations Updated
+ SystemUI Icons Added
+ AOSP Stock Lockscreen added
+ DroidLogo Fonts Added
Click to expand...
Click to collapse
If you like my work please hit the thanks button

XDA:DevDB Information
CrisKelo MultiRom V7.8.1 LB&UB, ROM for the Sony Xperia Z1
Contributors
D_Vovan_238, f(x)THaxxorX, amarullz, Garcia98, Philz, TWRP Team, CWM Team, DoomLord, [NUT], rovo89, ChelpuS.
Source Code: criskelo.de.vu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Xperia Z 1: C6903 or C6902.
Based On: Sony Stock Rom
Version Information
Status: Stable
Current Stable Version: [AROMA]3.0.8
Stable Release Date: 2015-06-14
Current Beta Version: AROMA 2.7S
Beta Release Date: 2015-02-06
Created 2015-04-09
Last Updated 2017-04-14

Reserved

RESERVED
RESERVED

RESERVED2
RESERVED

Seems nice but wow it's a tad bit confusing

I know but try it, I'm sure you will like it

D_Vovan_238 said:
I know but try it, I'm sure you will like it
Click to expand...
Click to collapse
Hi mate good to see you here !

Hi glad to see you to
Now started new thread wright here

noahvt said:
Seems nice but wow it's a tad bit confusing
Click to expand...
Click to collapse
My Aroma Installer also use this method for Kernel splash image change

noahvt said:
Seems nice but wow it's a tad bit confusing
Click to expand...
Click to collapse
Please use less colors at instructions..
Sent by my Z1 with XDA Fax

Duvel999 said:
Please use less colors at instructions..
Sent by my Z1 with XDA Fax
Click to expand...
Click to collapse
Ok

D_Vovan_238 said:
Ok
Click to expand...
Click to collapse
I received an error during installation: cannot stat /system/build.prop no such file or directory

noahvt said:
I received an error during installation: cannot stat /system/build.prop no such file or directory
Click to expand...
Click to collapse
You wiped your system before run Aroma Installer.
That's because it happens, wipe your phone with Aroma, while old rom is on system,it will not wipe data/media/0!
I was not thinking about this
But otherwise my device verification will not work.
Like all good Roms CrisKelo must verify if it is installing on correct device, because if the device is incorrect, it will possibly bricked or worse, Hard Bricked
Try it this way if still don't work, save the Installation Log and send it to me, or post it

Aroma installer updated !
New version released
Enjoy

From criskelo.de.vu
From criskelo.de.vu
D_Vovan_238 said:
Now it's not Simplified Multirom Aroma Installer it's just Multirom Aroma Installer
To have Multiple Roms now simply flash my newest [Aroma2.7MR], with Trinity Ultimate MultiBoot Kernel, IN TWRP OR PHILZ RECOVERY, and enjoy all Multirom Features
Pretty soon will post newest Aroma Installer
Some bootanimations added also.
Click to expand...
Click to collapse
D_Vovan_238 said:
All tested and seems to work perfectly with ALL RECOVERIES.
And because now wee don't need to inject multirom after installation I reenabled Reboot Now Option after installation
Click to expand...
Click to collapse

Was uploading my work whole night, but got error
Now will go to work, but later will try other time

Take your time
Sent by my Z1 with XDA Fax

Im not beeing able to download the rom. i get "enter decryption key" on that site...
also i seem to have lost the recovery thing. pressing back button on restart does nothing any more. what is recommended to use here?
EDIT: i manage to install towel using dualrecovery...
But still missing the stable realease as i cant download i only got the full multipackage thing. dont know whats the difference here...
EDIT2: after chosing a bunch of stuff when installing rom and now restarting the phone is stuck with "SONY". what to do?
EDIT3: I manage to get it working again. flashtool etc. and finally i got the rom up running. So far so good.
But 1 quetion change i change the font on text? i find it a bit to fanzy and hard to read.

U5tabil said:
Im not beeing able to download the rom. i get "enter decryption key" on that site...
also i seem to have lost the recovery thing. pressing back button on restart does nothing any more. what is recommended to use here?
EDIT: i manage to install towel using dualrecovery...
But still missing the stable realease as i cant download i only got the full multipackage thing. dont know whats the difference here...
EDIT2: after chosing a bunch of stuff when installing rom and now restarting the phone is stuck with "SONY". what to do?
EDIT3: I manage to get it working again. flashtool etc. and finally i got the rom up running. So far so good.
But 1 quetion change i change the font on text? i find it a bit to fanzy and hard to read.
Click to expand...
Click to collapse
Sorry, was buissy, will fix it on next versions
For now only solution is wipe
Now preparing to new release, all details on criskelo.de.vu
Detected some unstable scenario, possibly 25% that it will happens, but it is almost fixed
That's why still not uploading new version

But is it possible to change font? Cause its hard for an old guy like me to read it

MIUI V6 (5.5.8) for Galaxy W I8150 (cm11 base)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI v6 5.5.8
contains:
- Google Apps inside
- The main applications MIUI (with firmware authenticity of xiaomi - 99%)
- Translation of the full (But many China online apps)
bugs:
- you tell me
- Google Play will not download and update application. Known bug cm ports
Installation:
- Download the rom file and put it in the phone sdcard
- Reboot into recovery
- Make Full Wipe (don't forget to make a backup) or update if you have MIUI v5 flashed (your choice)
- select Install
* Select the rom in phone sdcard
* Wait for the installation, reboot into Bootloader for flash kernel (or flash boot.img at first)
*keyboard not included so install it as normal app after the first boot
Remember Flash kernel (boot.img)
*boot.img from the latest cm11 build
Download:
testing

guys i'm going to post download link for testing build and i need someone to test and report back as i don't own this device .

afi1982 said:
guys i'm going to post download link for testing build and i need someone to test and report back as i don't own this device .
Click to expand...
Click to collapse
thanks for thank you support :good: . you can upload the files other wed page ? because of slow page download Mega
? eg google drive, mediafile . thanks

File boot.img from the latest cm11 build arco68
View attachment 3326087

huongthanh8690 said:
View attachment 3326087
Click to expand...
Click to collapse
this kernel is inside the zip file

afi1982 said:
this kernel is inside the zip file
Click to expand...
Click to collapse
you can help me : this is the kernel inside the zip file
* I can not

which cm11 build is this based upon
and is it for the new partitioning layout?

theonepharaoh said:
which cm11 build is this based upon
and is it for the new partitioning layout?
Click to expand...
Click to collapse
arco68's cm11

1st of all there is a status 7 error and abort the installation because of it and I removed the device chk from the updater-script
And here is a some bug reports and some fixes
1- The miuihome is not working and I replaced it with the miuihome for non miui Roms
2- I put a keyboard because you will not be able yo download any one without a built-in one
3- There is a strange message on the ROM I cannot read it because it's a transparent message
4-the power menu doesn't work and don't know how to fix it
If uguys want me to upload the new zip file just let me know
Sent from my Nexus 4 using XDA Free mobile app

afi1982 said:
arco68's cm11
Click to expand...
Click to collapse
which build

afi1982 said:
MIUI v6 5.5.8
contains:
- Google Apps inside
- The main applications MIUI (with firmware authenticity of xiaomi - 99%)
- Translation of the full (But many China online apps)
bugs:
- you tell me
- Google Play will not download and update application. Known bug cm ports
Installation:
- Download the rom file and put it in the phone sdcard
- Reboot into recovery
- Make Full Wipe (don't forget to make a backup) or update if you have MIUI v5 flashed (your choice)
- select Install
* Select the rom in phone sdcard
* Wait for the installation, reboot into Bootloader for flash kernel (or flash boot.img at first)
*keyboard not included so install it as normal app after the first boot
Remember Flash kernel (boot.img)
*boot.img from the latest cm11 build
Download:
testing
Click to expand...
Click to collapse
Did you port it from source or by editing the zip files and the updater-script
Thanks
Sent from my Nexus 4 using XDA Free mobile app

giga80 said:
Did you port it from source or by editing the zip files and the updater-script
Thanks
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
patchrom

afi1982 said:
patchrom
Click to expand...
Click to collapse
Sent from my Nexus 4 using XDA Free mobile app

giga80 said:
1st of all there is a status 7 error and abort the installation because of it and I removed the device chk from the updater-script
And here is a some bug reports and some fixes
1- The miuihome is not working and I replaced it with the miuihome for non miui Roms
2- I put a keyboard because you will not be able yo download any one without a built-in one
3- There is a strange message on the ROM I cannot read it because it's a transparent message
4-the power menu doesn't work and don't know how to fix it
If uguys want me to upload the new zip file just let me know
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
same thing for me please fix it

afi1982 said:
patchrom
Click to expand...
Click to collapse
I tried to port it with patchrom but I get error messages I don't know why
And tried this with latest cm11 and the pervious one but porting fails
Sent from my Nexus 4 using XDA Free mobile app

hi @afi1982 : you can continue to support MIUI rom port: device i8150

i am seeing this.........any good news?
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
look my friend there is a build called Miutu v4 and it is the best so far for i8150 but of course if is a v5 of miui....can you somehow upgrade its kernel to 3.4.x instead of 3.0.x ?

where download link bro? files deleted by mega
afi1982 said:
MIUI v6 5.5.8
contains:
- Google Apps inside
- The main applications MIUI (with firmware authenticity of xiaomi - 99%)
- Translation of the full (But many China online apps)
bugs:
- you tell me
- Google Play will not download and update application. Known bug cm ports
Installation:
- Download the rom file and put it in the phone sdcard
- Reboot into recovery
- Make Full Wipe (don't forget to make a backup) or update if you have MIUI v5 flashed (your choice)
- select Install
* Select the rom in phone sdcard
* Wait for the installation, reboot into Bootloader for flash kernel (or flash boot.img at first)
*keyboard not included so install it as normal app after the first boot
Remember Flash kernel (boot.img)
*boot.img from the latest cm11 build
Download:
testing
Click to expand...
Click to collapse

Download link please

afi1982 said:
MIUI v6 5.5.8
contains:
- Google Apps inside
- The main applications MIUI (with firmware authenticity of xiaomi - 99%)
- Translation of the full (But many China online apps)
bugs:
- you tell me
- Google Play will not download and update application. Known bug cm ports
Installation:
- Download the rom file and put it in the phone sdcard
- Reboot into recovery
- Make Full Wipe (don't forget to make a backup) or update if you have MIUI v5 flashed (your choice)
- select Install
* Select the rom in phone sdcard
* Wait for the installation, reboot into Bootloader for flash kernel (or flash boot.img at first)
*keyboard not included so install it as normal app after the first boot
Remember Flash kernel (boot.img)
*boot.img from the latest cm11 build
Download:
testing
Click to expand...
Click to collapse
Any Link please? The link isn't working.

[RECOVERY][aio_row][UNOFFICIAL] TWRP 3.0.2-8

Changelog
TWRP 3.0.2-8 :
~Upgraded to TWRP 3.0.2-8 (Base, Security Patch,ETC.)
~Minor fixes
~Added ability to set system.img
=>TWRP -> Install -> Install image -> system.img -> System Image -> Swipe to confirm Flash.
~Optimized OTG FS support FAT32, exFAT, NTFS
~Flashable installation supported
TWRP 3.0.2-6 :
~Updated to TWRP 3.0.2-6 (Security Patch,Base,ETC.)
~Fixed code name error
~Backup and Restore Improvement
~Lot of Improvement
TWRP 3.0.2-5 :
~Initial release
Detailed Changelogs Here :
https://github.com/omnirom/android_bootable_recovery/commits/android-6.0

Reserved

How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]

tanish2k09 said:
How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]
Click to expand...
Click to collapse
Its will overwrite the old one with the new one... You can update via TWRP to
1. Boot to TWRP
2. Select install files
3. Select install image
4. Then select recovery image
5. Select install on recovery
6. Finish and go to reboot option and select reboot to recovery
6. Tadaaa your new Recovery installed

Themes support?

tanish2k09 said:
Themes support?
Click to expand...
Click to collapse
Support :fingers-crossed:

Thanks!

Ceco85 said:
Thanks!
Click to expand...
Click to collapse
Your welcome

What about compatibility of old backup created in 3.0.2-1

CyberDeat said:
What about compatibility of old backup created in 3.0.2-1
Click to expand...
Click to collapse
It I'll not detect backup from old TWRP,you need to backup files on new TWRP and just move your old backup to new folder one

You ported it or built it from source?

tanish2k09 said:
You ported it or built it from source?
Click to expand...
Click to collapse
Build from source on k3 note ported to a7000 :3

How to install on a non-rooted MM A7000-a?

jocph said:
How to install on a non-rooted MM A7000-a?
Click to expand...
Click to collapse
Use SP Flash tools

Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.

Thnx HDHR for the recovery :good:
---------- Post added at 03:37 PM ---------- Previous post was at 03:21 PM ----------
jocph said:
Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.
Click to expand...
Click to collapse
In sp flash tool...for flashing Recovery
1-Install lenovo driver
2-open sp flash tool by administration
3-load scatter file,
4-select recovery only (also select recovery u have downloaded)
5-check in option that dal dal option is tick
6- click on download
7-switch off ur phone...take out battery for 5 sec..reinsert battery and connect ur phone with pc then
It will automatically flash the recovery after u see a download ok popup window disconnect ur phone and u have successfully flash TWRP recovery

Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.

i flashed a theme on my old twrp.....the theme got caried on to this one......
i am unable to remove it....plez help.....
there is no folder of twrp in my sd card....

jocph said:
Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B5os0Tgr4idrbTA1WkxhUHB6TzA/view
Scatter file...there is also a old TWRP dont use it....

Develop Bugs

welcome