[Q&A] [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980
Q&A for [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Fantastic
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
filippo.gambarota said:
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
Click to expand...
Click to collapse
I don't know, maybe you can root with the flex 2 method. BTW if you have the newer bootloader you can't install twrp or any custom kernel
filippo.gambarota said:
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
Click to expand...
Click to collapse
Your best option is probably to use the LG flashtool 2014 and flash the old 4.2.2. KDZ
Then your'e back on the old 100% stock LG rom .
Root with towelroot and install TWRP (latest TWRP does not seem to work with flashify, use terminal commands instead)
After that you can use TWRP to flash the lollipop V50030a zip, and that way you keep both root and custom recovery.
Hi, and first of all many thanks for this rom !
However, like in 4.4 Kitkat, I still have the SD card unmounted issue sometimes, and gamma is only at 1.8. What can I do about these problems ? Do I have to flash something in particular ?
For information, my tablet had this rom installed before : http://forum.xda-developers.com/lg-g-pad-83/development/rom-android-5-0-lollipop-lrx21m-t2941207/page7
And I made a full clean before installing the new rom...did I missed something ?
camera
The camera-problem is fixed. Finally !!
Camera does not work on other android 5. Only on this it works
Yes !! thank you very much for all the work.
Thank you very much for this rom, but I have a question pus install updates lg to be modified recovey TWRP 2.8.6.0
screen brightness
Anyone noticed that screen is very bright even on 0% ? (too bright for me) or maybe i did something wrong ?
Few questions
Hello and thanks for working on our device. I have few questions. Are there any screen shots? Should I expect any random reboot or it is really and completely stock!? Are there anything good left out? For instance the good automatic brightness or the knocking ability to turn screen on or off.
Others who installed this rom also feel free to answer please. I appreciate it
It's complete. The whole LG crap is there. It's what you get when you get the official update. I had no reboot in the 5 hours before I went back to aosp.
hey guys...
how run this relase? there are any bugs?
Hi, thx for your work! The rom is running really great.
Any plan to include mod multiwindow for all apps?
I have notice that in quick remote we have lost a lot of type of device. Is it possible to port an other quick remote more complete?
How it compares to aosp ROM? Faster? Some unique featues? Besides lg crap?
Shimaran said:
Hi, and first of all many thanks for this rom !
However, like in 4.4 Kitkat, I still have the SD card unmounted issue sometimes, and gamma is only at 1.8. What can I do about these problems ? Do I have to flash something in particular ?
For information, my tablet had this rom installed before : http://forum.xda-developers.com/lg-...om-android-5-0-lollipop-lrx21m-t2941207/page7
And I made a full clean before installing the new rom...did I missed something ?
Click to expand...
Click to collapse
Had the same sd card issue, maybe is lollipop related
There is any solution to the unexpected remove of sd card issue?
It wasn't occurring with the lollipop aosp version. Maybe I should go back to aosp...
Inviato dal mio LG-V500 utilizzando Tapatalk
Update to 30A from stock
Hello
Using a stock unrooted unmodified version of kitkat on my gpad and have few questions:
I've noticed the lollipop rom comes to around 1.1 gb. Will the OTA too be of the same size?
I've seen instructions that this rom can be dirty flashed over the stock rom. Does this mean I download and save the new rom locally in the tab, go to stock recovery and flash the new rom directly from recovery? Just like that?
Oh and has anyone got the OTA at all?
Edit: anyone using international version of the g pad...
Thanks
After 2 weeks using this ROM, I uninstalled it because gamma was too low and videos were quite sluggish. That's too bad because battery management is far better than CM 11.2 based ROMs (especially while tablet is not in use), and LG's interface is interesting...but it's not designed for everyday use. At least not yet.
Error Loki-fying
I get this error while flashing this rom via CWM --> Error loki-fying boot image, what am i doing wrong?
petition
Hello Skin1980. I respect your work works very well for me. I need your help and understanding. You can do the same for LG GPAD 8.0 v490 V49020a_00? I can not install this device and root. Please help me.
Hi I have a weird issue, my wifi disconnects constantly every time the tablet is on deep sleep mode or downloading something. It's annoying especially for downloads. I already checked my wifi settings and they are set at "Always on" but still. Anybody else have this issues? BTW I dirty flash it over 4.4.2 maybe with a clean flash it get fixed
Related
Hello everybody,
I,ve read all around the forum but I couldn´t find information about my problem so i try it here.
From stock V500 20d I rooted and Installed TWRP 2.7.1.0 thanks to the good information in the Forum. After that, I've installed the ROM CM11 (M10) and, from the first reboot, the screen bright is very low. I hardly could do the first configuration and when it finished I selected the full bright.
After some time working it seems that it recovers some bright and I can down a little bit the bright from top.
Every time I restart the device I have the same bright issue.
Can anyone help me?.
Thanks a lot
reypescador said:
Hello everybody,
I,ve read all around the forum but I couldn´t find information about my problem so i try it here.
From stock V500 20d I rooted and Installed TWRP 2.7.1.0 thanks to the good information in the Forum. After that, I've installed the ROM CM11 (M10) and, from the first reboot, the screen bright is very low. I hardly could do the first configuration and when it finished I selected the full bright.
After some time working it seems that it recovers some bright and I can down a little bit the bright from top.
Every time I restart the device I have the same bright issue.
Can anyone help me?.
Thanks a lot
Click to expand...
Click to collapse
Extremely common problem when you were on the 4.4.2 base and are now an AOSP based rom. You either need to change kernels to RedKernel or flash the tablet back to the 4.2.2 base and then reflash your CM rom.
RedKernel info is here: http://forum.xda-developers.com/lg-g-pad-83/development/kernel-redkernel-t2856297
4.2.2 base info is here: http://forum.xda-developers.com/showthread.php?t=2719411
muiriddin said:
Extremely common problem when you were on the 4.4.2 base and are now an AOSP based rom. You either need to change kernels to RedKernel or flash the tablet back to the 4.2.2 base and then reflash your CM rom.
RedKernel info is here: http://forum.xda-developers.com/lg-g-pad-83/development/kernel-redkernel-t2856297
4.2.2 base info is here: http://forum.xda-developers.com/showthread.php?t=2719411
Click to expand...
Click to collapse
Thank you very much
I try to read the info and decide what to do.
Thanks again
Ok it´s done
First I´ve installer V500-4.2.2-Base from recovery, I have reinstalled CM 11 and everything OK.
I have tried a step beyond and I have installed [KERNEL][v500][4.4.4][AOSP] RedKernel [16/09] (everybody seems to be very happy with it) but, after install synapse I run it and appears "No UCI support detected". Seems that kernel doesn´t support it.
Thank you again for your help
reypescador said:
but, after install synapse I run it and appears "No UCI support detected". Seems that kernel doesn´t support it.
Thank you again for your help
Click to expand...
Click to collapse
Seems to be problems with Super SU but I can´t solve them at the moment
You must install the UKM scripts from recovery. Read the op from the red kernel thread...
edisso10018 said:
You must install the UKM scripts from recovery. Read the op from the red kernel thread...
Click to expand...
Click to collapse
What he said!
This confused me at first too. In the very early days of redkernel he included his own forked version of the UKM scripts those have been removed because the UKM script maintainer agreed to merge his changes and therefore he doesn't have to maintain his own copy (better for all involved so he can focus on kernel development). Search the thread you will find a link to where you can download the official UKM scripts and your problem will go away.
I currently run redkernel on the 4.4.2 base myself. I have not reverted to the 4.2.2. base since my last factory restore. I am very happy with this configuration...
muiriddin said:
I currently run redkernel on the 4.4.2 base myself. I have not reverted to the 4.2.2. base since my last factory restore. I am very happy with this configuration...
Click to expand...
Click to collapse
Originally I had issues with the sd card mounting with the 4.4.2 base. Has this been fixed with Red Kernel?
Sent from my LG-V500 using xda premium
ncguy68 said:
Originally I had issues with the sd card mounting with the 4.4.2 base. Has this been fixed with Red Kernel?
Sent from my LG-V500 using xda premium
Click to expand...
Click to collapse
I had the same problems. Mine was two fold, my sd card was dying (I have since got a new one) and the 4.4.2 base was still sometimes having an issue that sd card monitor would show as a bad removal. This was even with the new sd card. Once I switched to Infected's build of slimkat with the redkernel I have not had a bad removal (after running this way now for over a month) and the sd card monitor used to track at least one bad removal a week with stock 4.4.2. I have no idea if this will help others but it is working so far for my device. I am always running sd card monitor since I had problems and it is still reporting a clean record.
muiriddin said:
I had the same problems. Mine was two fold, my sd card was dying (I have since got a new one) and the 4.4.2 base was still sometimes having an issue that sd card monitor would show as a bad removal. This was even with the new sd card. Once I switched to Infected's build of slimkat with the redkernel I have not had a bad removal (after running this way now for over a month) and the sd card monitor used to track at least one bad removal a week with stock 4.4.2. I have no idea if this will help others but it is working so far for my device. I am always running sd card monitor since I had problems and it is still reporting a clean record.
Click to expand...
Click to collapse
Thanks. I am already using Infected's Slimkat, but I am still on 4.2.2 base. I may flash 4.4.2 base and give redkernel or mani kernel a try.
Sent from my LG-V500 using xda premium
ncguy68 said:
Thanks. I am already using Infected's Slimkat, but I am still on 4.2.2 base. I may flash 4.4.2 base and give redkernel or mani kernel a try.
Sent from my LG-V500 using xda premium
Click to expand...
Click to collapse
You didn't ask, but my approach would be:
Use LG tool to revert to 4.4.2 stock
Root with towel root
Install recovery and loki (I need to get you a link for this, but it involves editing a batch file to tell it to still install with revision d instead of b)
reboot recovery using adb, and immediately unplug cable
flash a recovery designed for 4.4.2 (2.7.0.1) from this link http://forum.xda-developers.com/showthread.php?t=2551499
Then install infected slimkat, redkernel and the ukm zip files
I never use the 4.4.2 base files to flash the device to 4.4.2 I always use the LG Tool and go from there.
muiriddin said:
You didn't ask, but my approach would be:
Use LG tool to revert to 4.4.2 stock
Root with towel root
Install recovery and loki (I need to get you a link for this, but it involves editing a batch file to tell it to still install with revision d instead of b)
reboot recovery using adb, and immediately unplug cable
flash a recovery designed for 4.4.2 (2.7.0.1) from this link http://forum.xda-developers.com/showthread.php?t=2551499
Then install infected slimkat, redkernel and the ukm zip files
I never use the 4.4.2 base files to flash the device to 4.4.2 I always use the LG Tool and go from there.
Click to expand...
Click to collapse
Just curious … is there something wrong with flashing the base files to switch between 4.2.2 and 4.4.2?
Now that I have two Gpad's I plan to install 4.4.2 base on one and compare it with 4.2.2 base on the other. Just wonder if I can tell any difference.
Thanks for the info.
Sent from my LG-V500 using xda premium
ncguy68 said:
Just curious … is there something wrong with flashing the base files to switch between 4.2.2 and 4.4.2?
Now that I have two Gpad's I plan to install 4.4.2 base on one and compare it with 4.2.2 base on the other. Just wonder if I can tell any difference.
Thanks for the info.
Sent from my LG-V500 using xda premium
Click to expand...
Click to collapse
I am unaware of a problem with the 4.4.2 base files provided. I have just never used them, I already had the LG Support Tool downloaded and it was easiest to use the path I knew and was comfortable with.
The key thing (and why I run the 4.4.2 base instead of the 4.2.2. base) that is different is the brightness at its lowest setting. The 4.2.2 base on many of the V500's suffers from alternating light and dark spots on one side of the tablet when viewing the tablet in low light with the brightness at its lowest setting and viewing gmail (any app with a white background basically). I use my tablet mostly in dark conditions like this (man I make it sound like I live in a basement somewhere *laughs*). The 4.4.2 base firmware changes the tablet so it functions well at the lowest brightness.
The first picture in this thread shows the screen problem I refer to (although not on a white screen):
http://forum.xda-developers.com/showthread.php?t=2553055
Q&A for [GT-I9195][ROM][Official][4.4.4] CyanogenMod 11.0 Nightlies for S4 Mini LTE
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
buggy CM
toeterbaas said:
Dont you guys have problems with freezing camera especially with flash?
Click to expand...
Click to collapse
gt-i9195 here.
Installed CM11 nighly form 10.10.2014. Noticed bugs: Dialer blocks while receiving calls (fatality); Contacts: important vcards from extsdcard crashes;
Installed CM10 latest stable - Contacts won't see ext sd card mounted (I guess) since it says it found no vcard to import from there. Really don't feel motivated to go any further, restoring stock..
--
Ever lasting boot
Hey there, I recently followed this tutorial on how to install Cyanogenmod on your GT-I9195. Though, I have ran into a very annoying issue and I'm stuck without any clue on how to solve it:
I rooted my phone successfully using CMW and the rootkit supplied in the rooting thread referred to here. The phone worked fine and SuperSU was present after the root.
I then proceeded to wipe userdata / cache and install the latest CyanogenMod 11 nightly(11/11/2014) + Gapps supplied from this thread.
I rebooted the phone after the installation was complete of both CyanogenMod and Gapps.
I was greeted with a never ending Cyanogenmod booting screen.
I am not using a custom kernel, thought I'd just mention that too.
I tried just installing Cyanogenmod and rebooting too, still a never ending boot screen.
I am really lost because this has worked for just about everyone who replies to this thread. I noticed some people have been having problems lately, could it just be the latest nightly causing problems?
Thanks in advance!
EDIT: I installed CyanogenMod 11 M12 and now it works perfectly! The build from 11/11/2014 is not working properly it seems.
question about compatible with sgh-i257m?
first off i would like to sincerely say thank you to arco68. I wish i found your cf auto root app sooner as i think it is by the best method off gaining root access by far! I just switched to android 2 years ago and just love it compared to fighting with jailbroken pos! Lol... I see arco68 is working on this cyanogenmod rom for i9195? I have a sgh-si257m and as far i know is pretty much the same cell except for fm radio? I rooted with cf auto to keep my device name and flags default ( again hail arco68) . But before i jump and mess something up (done that before) can someone confirm i can just do a normal rom flash and gapps and everything should work? ( even tho i have different phone)
Does this rom have its own kernel? If so will my device name change? Sorry for the newbie questions im still learning. Again thanks to arco68 i wish i could donate for your hard work but im layed off right now and with 3 kids.....well once im working i sure will. Thank you All
How I can move my apps in the memory card?
shanephelan said:
first off i would like to sincerely say thank you to arco68. I wish i found your cf auto root app sooner as i think it is by the best method off gaining root access by far! I just switched to android 2 years ago and just love it compared to fighting with jailbroken pos! Lol... I see arco68 is working on this cyanogenmod rom for i9195? I have a sgh-si257m and as far i know is pretty much the same cell except for fm radio? I rooted with cf auto to keep my device name and flags default ( again hail arco68) . But before i jump and mess something up (done that before) can someone confirm i can just do a normal rom flash and gapps and everything should work? ( even tho i have different phone)
Does this rom have its own kernel? If so will my device name change? Sorry for the newbie questions im still learning. Again thanks to arco68 i wish i could donate for your hard work but im layed off right now and with 3 kids.....well once im working i sure will. Thank you All
Click to expand...
Click to collapse
It has its own kernel, and device name will not change. Installing it will trigger knox though.
Max call volume in S4 Mini CM11
Hi,
I have a problem with call volume in S4 mini with cm-11-20141202-NIGHTLY. So in every call, the sound volume is set to max and I need to turn it down (call sound volume setting isn't remember in the next call). It's really annoying. If you resolve this problem please send me information how to do it.
Best regards
which proprietary blobs should we use when compiling cm12 - TheMuppets or Arco's fork?
https://github.com/arco/proprietary_vendor_samsung
https://github.com/TheMuppets/proprietary_vendor_samsung
Hi guys, I'm new here, I've just bought a s4 mini and I want to install this rom on it. I have 4.2.2 ml4 on the phone, knox enabled. I've read around the forum, but I'm still a little bit in the dark. One question would be if I install a custom rom, there is no way to do it without tripping knox as it needs custom recovery? And the second one do I need to be on a specific baseband jb or kk to install kk? Thanks
cojocar.andrei said:
Hi guys, I'm new here, I've just bought a s4 mini and I want to install this rom on it. I have 4.2.2 ml4 on the phone, knox enabled. I've read around the forum, but I'm still a little bit in the dark. One question would be if I install a custom rom, there is no way to do it without tripping knox as it needs custom recovery? And the second one do I need to be on a specific baseband jb or kk to install kk? Thanks
Click to expand...
Click to collapse
On both questions the answer is NO.
I have flashed my S4 LTE just after I unboxing the phone and downloaded all I need from Arco's thread for root.
Hi,
i have a little problem with my vibration.
My vibration doesn't work. i have try all settings and a order costum rom. The vibration isn't broken, because at the start vibrate the mobil phone, before it boot on the cyanogenMod
Have anyone a idea?
Hi does anyone know why the links for cm11 nightly are not working,when you try to download the size is only something like 3k
server down
I cannot download anything for i9195 cm-11...
Can you fix it?
mirror
kingzback said:
I cannot download anything for i9195 cm-11...
Can you fix it?
Click to expand...
Click to collapse
here is an unofficial mirror-link: http://forum.xda-developers.com/showpost.php?p=58234747&postcount=548
Why do you upload it ? It´s just right here from Cyanogenmod...
http://download.cyanogenmod.org/get/jenkins/97652/cm-11-20150105-NIGHTLY-serranoltexx.zip
gfogger said:
Why do you upload it ? It´s just right here from Cyanogenmod...
http://download.cyanogenmod.org/get/jenkins/97652/cm-11-20150105-NIGHTLY-serranoltexx.zip
Click to expand...
Click to collapse
Have you tried to download from this link?
Are various days that this link doesn't work.....
DeusEx80 said:
Have you tried to download from this link?
Are various days that this link doesn't work.....
Click to expand...
Click to collapse
in the main thread someone upped the latest beta here:
http://www.filedropper.com/cm-11-20150105-nightly-serranoltexx
v00d007 said:
in the main thread someone upped the latest beta here:
http://www.filedropper.com/cm-11-20150105-nightly-serranoltexx
Click to expand...
Click to collapse
I answered to gfogger that who said:
gfogger said:
Why do you upload it ? It´s just right here from Cyanogenmod...
Click to expand...
Click to collapse
The latest nightly is uploaded by me : http://forum.xda-developers.com/showpost.php?p=58234747&postcount=548
Hi,
I would like to download the latest CM11 but it's neither on CM nor any other share that I tried.
Could someone help me downloading this ROM?
I don't want to use CM12 because I use xposed.
Thanks
[Q&A] [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended
Q&A for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Little Problem
Had a little problem during the installation on Recovery PhilzTouch 6.57.8.
I think is an Aroma graphical incompatibility, no big problems.
It was like the background of the installer was trasparent so during the configuration in Aroma i was able to see the "console command" on CWM.
ZumerSandro said:
Had a little problem during the installation on Recovery PhilzTouch 6.57.8.
I think is an Aroma graphical incompatibility, no big problems.
It was like the background of the installer was trasparent so during the configuration in Aroma i was able to see the "console command" on CWM.
Click to expand...
Click to collapse
Hi Zumer, im using Philz 6.26.6, that one works well with this rom. Try it
Hi seeing as I have been pointed here I'll repeat the question. I cannot get the wake actions to change from default. I can change them and it says that I am using said function but the action still produces the default function. I am s-off and unlocked on an international version. Have no troubles with this on other roms but prefer to use SD. any ideas or help much appreciated.
cometabro said:
Hi seeing as I have been pointed here I'll repeat the question. I cannot get the wake actions to change from default. I can change them and it says that I am using said function but the action still produces the default function. I am s-off and unlocked on an international version. Have no troubles with this on other roms but prefer to use SD. any ideas or help much appreciated.
Click to expand...
Click to collapse
Using root explorer, go to system /etc/int.d folder, cut and paste in ur sd card, as backup, 99skydragon file, then reboot and try.
Cheers for the reply. So I get to the point of cut and paste and it tells me system is read only. How do I change this. Obviously I'm not too clued up but can follow directions. Thanks
cometabro said:
Cheers for the reply. So I get to the point of cut and paste and it tells me system is read only. How do I change this. Obviously I'm not too clued up but can follow directions. Thanks
Click to expand...
Click to collapse
Look, when u are trying to cut an alert will prompt about permissions and rights, say YES, then cut. Try this time with the 40StW file
So this is what I'm getting. And in the top left of root explorer it says mounted as r/o
cometabro said:
So this is what I'm getting. And in the top left of root explorer it says mounted as r/o
Click to expand...
Click to collapse
Press tab where says R O to R W. I did delete mine without a problem
Cheers for trying to help. Still no luck.maybe I'm blind or just not having a good day.
I haven´t been able to use HTC backup and restore tool after I flash SD v 20 rom.
When installed Rom was not able to restore and now I have FC when try to open the app.
geragar said:
I haven´t been able to use HTC backup and restore tool after I flash SD v 20 rom.
When installed Rom was not able to restore and now I have FC when try to open the app.
Click to expand...
Click to collapse
Will check tomorrow, comparing it with v 19.
If did work on v 19 should work on this one
dragonesdenano said:
Will check tomorrow, comparing it with v 19.
If did work on v 19 should work on this one
Click to expand...
Click to collapse
Sorry, it was my fault. I chose not to install My HTC and that caused the FC. Flash again the ROM and now everything is working great.
Thanks for you work.
geragar said:
Sorry, it was my fault. I chose not to install My HTC and that caused the FC. Flash again the ROM and now everything is working great.
Thanks for you work.
Click to expand...
Click to collapse
Thats great!
Really I never use that feature, what always leave it in the rom cause a lot of user use it!
Firmware
Is it useful to flash the newest firmware 3.28.401.9 (the thingy that includes modem files etc.) before flashing v22? I´m currently on v20 with firmware 3.28.401.6. v20 needed the new firmware, otherwise wifi won´t work, but v22 still running with the old one.. Is it recommended to flash it anyway? Unfortunately it´s a very time-consuming process to do the firmware upgrade..
striker_lt said:
Is it useful to flash the newest firmware 3.28.401.9 (the thingy that includes modem files etc.) before flashing v22? I´m currently on v20 with firmware 3.28.401.6. v20 needed the new firmware, otherwise wifi won´t work, but v22 still running with the old one.. Is it recommended to flash it anyway? Unfortunately it´s a very time-consuming process to do the firmware upgrade..
Click to expand...
Click to collapse
Only if you are facing lots of problems. Im actually on Latest dev edition firmware, not even International, all ok. So i wont update firmware yet
Thanks for the quick reply.
I´ve no problems at all. Battery is great and 3g/LTE recception too. So i´ll wait with firmware update until "L" arrives
Only Problem I noticed is, that I can´t get the Doubletap2Wake / Sweep2Wake funktion work in ExtremeEnergySaving Mode... It vibrates on doubletap/sweep but no wake... :/ Not sure if it´s the rom or my mistake. I´ve enabled the feature in sense mod but it´s only working on ExtendedBatterySaving disabled!
You´re doing great work, Sir!
striker_lt said:
Thanks for the quick reply.
I´ve no problems at all. Battery is great and 3g/LTE recception too. So i´ll wait with firmware update until "L" arrives
Only Problem I noticed is, that I can´t get the Doubletap2Wake / Sweep2Wake funktion work in ExtremeEnergySaving Mode... It vibrates on doubletap/sweep but no wake... :/ Not sure if it´s the rom or my mistake. I´ve enabled the feature in sense mod but it´s only working on ExtendedBatterySaving disabled!
You´re doing great work, Sir!
Click to expand...
Click to collapse
Wake options can be our kernel. Rite now HolyAngel is on Gpe Android L, working on that. Soon will fix it. Meanwhile, i will prepare a new version with an old version of SD kernel till get a new one
Htc One m8 no wifi after intalling custom rom
Guys ive just flashed the latest Skydragon rom to my htc one m8 and now the wifi can't be switched on
Ive updated my firmware to fw_2.22.401.5_no_red_text
The phone is rooted and s-off
Can anyone please advise
Fixed it was the firmware being to old, updated and now im sorted
vwcrod said:
Guys ive just flashed the latest Skydragon rom to my htc one m8 and now the wifi can't be switched on
Ive updated my firmware to fw_2.22.401.5_no_red_text
The phone is rooted and s-off
Can anyone please advise
Fixed it was the firmware being to old, updated and now im sorted
Click to expand...
Click to collapse
Must try firmware 3.xx.xxx.xx
As Rom has Android 4.4.4 same as new firmware
Q&A for [FIX][SHARPENING][ALL VARIANTS] Sharpening Mod Script v. 1.0 Beta
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [FIX][SHARPENING][ALL VARIANTS] Sharpening Mod Script v. 1.0 Beta. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Tried flashing this mod with CloudyG3 1.2 D850. Sadly it didn't work. Bootloader found it to be a security hazard. Strangely your other mod works. I chose 0 sharpening
Still noob user. Can only post here
FYI
Today i formated data then reinstall chupa rom , superSu latest, then chupa kernel without sharpening , to finish with sharpening mod.. -> i got security kernel error
If i do same but flashing 1.9 kernel with sharpening , all good.
Im on D855
Cool installer and nice work, but unfortunately the LS990 doesn't seem to take to this. I was on the original oversharpening fix kernel with KitKat stock and tried to flash the script, resulting in the security boot error. I saw your suggestions and flashed the RIN kernel, then your installer, but got the same results. Oh well! I'll gladly take any troubleshooting suggestions.
After a fresh format (again) all worked so fine. but once i applyied this MOD , i got weird things happened. Screen was blinking and go off without touch it... unusable. and if i pressed reboot , i had a choice beetween Wallis & Futuna and Vietnam ????? WTF lol
D855 V20D bumped
a question from a noob.
How or what do you install to install the kernel?
doesn't work for G3 VS985 Lollipop AOSP
Thank you very much skin1980 for this fix. I have a d851 running skydragon kernel and everytime I boot up, I have to shut the screen on/off for the effect to take. Any ideas?
Total novice - please help
I have just purchased the LG G3 and this issue is driving me mad. Everything else about the phone is incredible but I cannot use it like this. At all. I have never used Android, never rooted and done anything like this, so I would appreciate if someone can guide me through the process. Few questions though:
1. I have a D855 running software V10L-234-10 ; Kernel 3.4.0. It is from O2, UK. Does this fix work with this?
2. If I cannot get this fixed, I will certainly return the device. However, does rooting and flashing/doing this process void my ability to return it? Or will they not notice?
3. Am I correct that the easiest / safest way to do is via http://forum.xda-developers.com/lg-g3/themes-apps/multimod-improveg3-t2958376 Improve G3?
Hi, I picked up this phone few days back - everything was incredible apart from the screen. I'm totally new to this - but I rooted (purpledrake), and installed custom recovery to install the sharpening mod. I absolutely love the phone now and the screen is incredible (like it should be). Thank you thank you so much for this! I'm otherwise running the stock KitKat ROM it came with.
I'm looking for the best stock lollipop ROM on which I can either apply the sharpening fix or it is pre-applied. Reason I want stock is because I LOVE Knock Code and the hold volume down for camera. I would like to get that.
Can someone please suggest a ROM? I want it to be stable and have good battery life. I don't want to be on the bleeding edge with cyanogenmod or anything like that. If I can get pure lollipop android (loved it on my Nexus 5) with Knock Code and volume down with stability and battery life, I would love that too.
THANK YOU for making the mod and I'll be grateful for the help
Got boot loop after flashing V3 on F400K - CloudyG3 1.2
LG G3 s (d722) same sharpening problem
Hi!
Two days ago I bought the LG G3 S (D722) and the sharperning problem is the same or higher like LG G3
I have been searching the aroma script for LG G3 S (D722) but I didn't found
Anyone knows if I can apply the "LG G3 aroma script" to the mini version?
or ... anyone knows how to fix it?
Thanks in advance
Halp
Hey guys, I have become an owner of the LG G3 D855 as of recently, and like many, I am disappointed by the over-sharpened UI.
Basically, I'm debating between returning it and attempting to mod it by myself, but since I'm lacking some (basic) understanding in the area, I cannot make any informed decisions without some help.
With that said, here are some, perhaps noobish, questions, the answers to which would really help me get a more clear view of what would be the right choice for me:
1. Does flashing this, or some other kernel actually solve the issue, without exposing some other artifacts of the display?
- I mean it's been almost half a year since the phone's release, and the sharpening still hasn't been removed, it would be only logical to assume there's a reason for that.
2. Does the kernel dictate what rom the phone could have? In other words, could I flash CM12 on top of it, or am I limited to the stock rom?
3. Just to make sure I'm getting the order of operations straight: to flash the kernel I would first need to root, install a custom recovery, make a backup file, and then "install the [kernel] zip" (whatever that means), correct?
- If such is the case, I assume that if the need to un-void my warranty may arise, I could then unroot my phone and it would be back to stock like nothing ever happened, right?
Lastly, has anyone noticed any backlighting inconsistencies? On day one I've noticed that the pixel matrix of the screen seems uneven, which manifests in a "hatching" effect, it is noticeable the most upclose, on a white background though. Also when (slowly) pulling down the notification shade, I notice that there are some wave patterns forming on the screen as it dims. It would have probably been easier to just film it, but I hope you understand what I mean, if not know from first hand experience. The wallpaper I'm using is the snowy mountains photo, with the bright, grayish, sky. Software version: Stock rom, Lollipop 5.0.
Gloomy Moonie said:
Hey guys, I have become an owner of the LG G3 D855 as of recently, and like many, I am disappointed by the over-sharpened UI.
Basically, I'm debating between returning it and attempting to mod it by myself, but since I'm lacking some (basic) understanding in the area, I cannot make any informed decisions without some help.
With that said, here are some, perhaps noobish, questions, the answers to which would really help me get a more clear view of what would be the right choice for me:
1. Does flashing this, or some other kernel actually solve the issue, without exposing some other artifacts of the display?
- I mean it's been almost half a year since the phone's release, and the sharpening still hasn't been removed, it would be only logical to assume there's a reason for that.
2. Does the kernel dictate what rom the phone could have? In other words, could I flash CM12 on top of it, or am I limited to the stock rom?
3. Just to make sure I'm getting the order of operations straight: to flash the kernel I would first need to root, install a custom recovery, make a backup file, and then "install the [kernel] zip" (whatever that means), correct?
- If such is the case, I assume that if the need to un-void my warranty may arise, I could then unroot my phone and it would be back to stock like nothing ever happened, right?
Lastly, has anyone noticed any backlighting inconsistencies? On day one I've noticed that the pixel matrix of the screen seems uneven, which manifests in a "hatching" effect, it is noticeable the most upclose, on a white background though. Also when (slowly) pulling down the notification shade, I notice that there are some wave patterns forming on the screen as it dims. It would have probably been easier to just film it, but I hope you understand what I mean, if not know from first hand experience. The wallpaper I'm using is the snowy mountains photo, with the bright, grayish, sky. Software version: Stock rom, Lollipop 5.0.
Click to expand...
Click to collapse
If you use the zip script:
1 no issue
2 every rom
3 need only twrp to flash the zip. If you will flash a kdz of a stock fw all is good again for the warranty
Sent from my SM-N910F using XDA Free mobile app
D855 V20f - works like a charm.
Huge THANKS to everyone involved in creating this fix, I was almost ready to dump the phone just because of this sharpening... even tho my eyesight leaves much to be desired, the difference is night and day. Some webpages used to be almost unreadable due to this madness, honestly... LG devs screwed it big time.
This is a must for every G3 owner
Does it work on stock lollipop?
fprhqkrtk303 said:
Does it work on stock lollipop?
Click to expand...
Click to collapse
this is anitquated. use this http://forum.xda-developers.com/lg-g3/orig-development/fix-sharpening-mod-script-1-0-beta-t2957648
but yes, the oversharpening fix does work on LP
Hi guys,
Will this affect the performance and battery life of lg g3? Thanks
Hi guys,
Will this affect the performance and battery life of lg g3? Thanks
Sharpness Reduction for an average user
hey guys, I would really much like to get the sharpness fix for my LG G3 D852 running on android lollipop 5.0.1. I have already rooted my device but can not get to do the sharpening fix part as I am not that much of a phone geek. Could anyone please do a Step by Step tutorial video. i would very much appreciate that. Thanks.
Q&A for [ROM] UltraPOP [ZVG] [05-07-2015] [Ver 1.0]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] UltraPOP [ZVG] [05-07-2015] [Ver 1.0]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
tpike1296 said:
So, first I'll quickly detail how I upgraded. Coming from Blisspop, I ran Autorec for Lollipop (linked in OP), rebooted to recovery, wiped flashed the ZVG radios (linked in OP), flashed the rom, and it was good to go. No tot back to stock required for me (YMMV).
Click to expand...
Click to collapse
I did the exact same thing to my ls980 coming from Blisspop 2.3 and it just looped at the LG boot logo. Then I flashed the kernel to see if that would work and now I can't even get the lg flash tool to see my phone in download mode! I can't even flash back to stock! Before that I tried to restore my my twrp backups but none of them are working now. Kinda pissed, not blaming anybody. I just wish sometimes things weren't explained in such a bleak manner. The more specifications the better. In other words, depending on which version of Blisspop and what phone model you're using....this might now work for everybody.
Deeshizzle said:
I did the exact same thing to my ls980 coming from Blisspop 2.3 and it just looped at the LG boot logo. Then I flashed the kernel to see if that would work and now I can't even get the lg flash tool to see my phone in download mode! I can't even flash back to stock! Before that I tried to restore my my twrp backups but none of them are working now. Kinda pissed, not blaming anybody. I just wish sometimes things weren't explained in such a bleak manner. The more specifications the better. In other words, depending on which version of Blisspop and what phone model you're using....this might now work for everybody.
Click to expand...
Click to collapse
Last I saw the lollipop auto-rec was named "ls980_best_version_omg_so_good"
If you didn't flash that version. You will be in a heap of trouble.
And the icon has a picture of a lollipop with "ARec" written in it.
Deeshizzle said:
I did the exact same thing to my ls980 coming from Blisspop 2.3 and it just looped at the LG boot logo. Then I flashed the kernel to see if that would work and now I can't even get the lg flash tool to see my phone in download mode! I can't even flash back to stock! Before that I tried to restore my my twrp backups but none of them are working now. Kinda pissed, not blaming anybody. I just wish sometimes things weren't explained in such a bleak manner. The more specifications the better. In other words, depending on which version of Blisspop and what phone model you're using....this might now work for everybody.
Click to expand...
Click to collapse
secret.animal said:
Last I saw the lollipop auto-rec was named "ls980_best_version_omg_so_good"
If you didn't flash that version. You will be in a heap of trouble.
And the icon has a picture of a lollipop with "ARec" written in it.
Click to expand...
Click to collapse
I just uploaded a boot partitions upgrad/fix coming from ANY version of ROM or Firmware. for testing You must have a LGD panel (Not JDI) to use. See second post in UltraROM for details.
secret.animal said:
Last I saw the lollipop auto-rec was named "ls980_best_version_omg_so_good"
If you didn't flash that version. You will be in a heap of trouble.
And the icon has a picture of a lollipop with "ARec" written in it.
Click to expand...
Click to collapse
Agimax said:
I just uploaded a boot partitions upgrad/fix coming from ANY version of ROM or Firmware. for testing You must have a LGD panel (Not JDI) to use. See second post in UltraROM for details.
Click to expand...
Click to collapse
It's all good on my end. For some reason the laptop that I only use for flashing my phone to stock was set to the wrong com port. I flashed to stock, upgraded to ZVG, rooted, used AutoRec Lollipop, wiped everything except internal memory, flashed the rom, waited a little bit for the LG logo to disappear and everything has been smooth ever since. It's a nice, minimalistic, clean rom. Indeed worth the trouble, good work. One question? How can I get a menu button in the navigation bar in this rom? Is it there and I just can't find it?
Good job, man.
I'm waiting for unlock sim version
Im come from asian and use LS980
Lg ls890 zve
how to TOT ZVE on LG LS980..
please guide step by step
my phone is rooted and i am on stock zvc with twrp recovery...
need ur help
Hi, im waiting for unlock sim version.
I live in Vietnam and use LS980
Can i know when that version is available please?
And, your ROM is awesome. I like it when i see the first picture
Farhan Ashraf said:
how to TOT ZVE on LG LS980..
please guide step by step
my phone is rooted and i am on stock zvc with twrp recovery...
need ur help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50504446
Fix wifi hotspot issue
https://www.youtube.com/watch?v=e8ENfODL4Ss
unable to play videos its says cant play video on Gallery
VVM can't update
i installed the zip for the VVM and now it says there is an update, i click download and it just clocks trying to download.
Is this expected or a bug?
Thanks
Hi guys. I see that someone writes here that WiFi tethering should work in this ROM but I don't even have WiFi tethering item in my settings. Should I enable it somehow? May be it is related to my network type (CDMA)? How can I have it working? Would be grateful for any advice.
Help
Sorry, I'm fairly new with rooting and putting roms on my device so I need some assistance if possible. I current have the Sprint LG G2 device currently running cloudy 3g 2.1 prior to the Lollipop update. I was wondering if someone can do a video or walk me through returning it to official so I can OTA update to Lollipop and then get the rom ultrapop 1.2. Sorry to bother everyone just a noob here trying to learn on how to become more efficient on changing and updating roms.
Thank you,
Jose
tjose619 said:
Sorry, I'm fairly new with rooting and putting roms on my device so I need some assistance if possible. I current have the Sprint LG G2 device currently running cloudy 3g 2.1 prior to the Lollipop update. I was wondering if someone can do a video or walk me through returning it to official so I can OTA update to Lollipop and then get the rom ultrapop 1.2. Sorry to bother everyone just a noob here trying to learn on how to become more efficient on changing and updating roms.
Thank you,
Jose
Click to expand...
Click to collapse
First question, did you put the phone to cloudy 3g 2.1? It did you buy it that way?
Which service provider or carrier are you on? Sprint or someone else?
These are important as stock will only allow sprint to work.
secret.animal said:
First question, did you put the phone to cloudy 3g 2.1? It did you buy it that way?
Which service provider or carrier are you on? Sprint or someone else?
These are important as stock will only allow sprint to work.
Click to expand...
Click to collapse
Yes I put it and yes I'm on sprint.
tjose619 said:
Yes I put it and yes I'm on sprint.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45293512
Use the appropriate one for sprint. Take the ota, root via the one click method that is in "Sprint Android development".
http://forum.xda-developers.com/showthread.php?p=60393860
Use the auto-rec lollipop from here
http://androidforums.com/threads/lg-g2-autorec-twrp-on-lollipop-stock-rooted.917299/
Then flash rom.
tjose619 said:
Yes I put it and yes I'm on sprint.
Click to expand...
Click to collapse
Will we have The Dorimanx kernel soon?
I've seen he wants to add it but hasn't yet. The Lollipop Dorimanx is out, but no new version with it. Will we see it anytime soon?
ThatOneGuy67 said:
I've seen he wants to add it but hasn't yet. The Lollipop Dorimanx is out, but no new version with it. Will we see it anytime soon?
Click to expand...
Click to collapse
Currently, there are issues with the Kernel, I am following the progress closely.
Agimax said:
Currently, there are issues with the Kernel, I am following the progress closely.
Click to expand...
Click to collapse
Also, can you bring back the original task manager into the ROM? I miss having the app built in. And I'm having problems with video playback when I record something.