Develop Bugs

attempted to root and failed, need help please

Hi, I started out with a stock tmobile s3 and tried to root it for the first time today, I followed this video
http://www.youtube.com/watch?v=mndQZqom3Ac
which asked me to use this cf-root 6.4
http://forum.xda-developers.com/showthread.php?t=1695238
when I hit start on that .tar file under odin, it failed stating "complete (write)operation failed)
since then, my device would boot with error "firmware upgrade encountered an issue" nothing else would happen.
I tried to go into recovery mode again and this time when I tried to retry the odin tar install, it would give me a new fail of cannot open com3
When I tried to use kies, it would just forever try to connect and never connect. so I couldnt do anything there.
What can I do? I would preferably try to retain all my saved data.
I also suspect my usb port might be faulty, sometimes need to press it in firmly to make the usb mass storage to work properly.
Thanks in advance

What is your Current android version ?

Perseus71 said:
What is your Current android version ?
Click to expand...
Click to collapse
i really didnt note which version i have... noob mistake i kmow. i think it is 4.2...is there any way i can check?

Ok, I totally messed up when I first attempted this. The .tar I used was for an international s3 and I have a tmobile us version!. the OP of the thread says it may even brick my phone if I attempt this on a non international version.
competely my fault, but what should I do to fix this and save my phone?
I cannot connect to kies, reinstalled the drivers and it still wont connect. just gets stuck in "connecting"
The odin now doesnt load a tar because it says "cannot open com3 "
EDIT:
fixed it, odin was not working due to kies running in the background and I finally was able to flash the correct chainfire for my phone

Glad its sorted out. I assume no issues now ?

[Q] Kies 3 Unsupported device alert

Does anyone else get an error with Kies 3? when I connect my Edge Kies gives me an error! I want to perform a device recovery via Kies that's my last hope. I tried to root my Edge and now I'm stuck with a bricked phone and yes I have tried Odin 3.10.6 and regular s6 Auto Root from Chainfire as well. nothing works for me, I've looked everywhere to find the G925t firmware but no luck again. I'm really screwed.:crying:

Same

I'm guessing kies wont recognize it til after 4/10 since technically nobody is supposed to have it yet. Just a guess though.

dcmtnbkr said:
I'm guessing kies wont recognize it til after 4/10 since technically nobody is supposed to have it yet. Just a guess though.
Click to expand...
Click to collapse
same issue here. Had to use smart switch which is not as efficient from my old galaxy to the new one. Transfer stopped and had to restart 2nd time which did seem to complete.
Helium is much better for transferring data to new phone..

Same issue here. New Galaxy S6 and Kies 3 won't allow it: Unsupported device alert. WFT?

acana79 said:
Same issue here. New Galaxy S6 and Kies 3 won't allow it: Unsupported device alert. WFT?
Click to expand...
Click to collapse
Do the following: open Kies, click on tools, Firmware upgrade and initialisation, enter your model number and serial number and let it download the firmware, after an hour or so depending on your connection speed the firmware will be downloaded and your phone will reboot into recovery to install the firmware. done

Use Samsung Smart Switch instead. It has replaced Kies for the newer phones.
Here is my video showing it being used to flash Stock Firmware to the Edge.
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176

Supersport, I have a SM-G900A (Galaxy S5 ATT) and Kies 3 and Smart Switch says it is an unsupported device. I got to the part to enter the model and serial and it comes up unsupported again. I tried a different USB cable and also tried Smart Switch on a Mac. The white USB3 Samsung cable does not allow the phone to be recognized by the Mac so I used an old USB2 cable and it hangs on "connecting to your device".
I tried downgrading to Android 4.4.2 so I could root it and it is in the "firmware encountered an issue" screen with the yellow triangle. Ack!

Boysterload said:
Supersport, I have a SM-G900A (Galaxy S5 ATT) and Kies 3 and Smart Switch says it is an unsupported device. I got to the part to enter the model and serial and it comes up unsupported again. I tried a different USB cable and also tried Smart Switch on a Mac. The white USB3 Samsung cable does not allow the phone to be recognized by the Mac so I used an old USB2 cable and it hangs on "connecting to your device".
I tried downgrading to Android 4.4.2 so I could root it and it is in the "firmware encountered an issue" screen with the yellow triangle. Ack!
Click to expand...
Click to collapse
It sounds like the MAC had issues with installing the driver. I'm not positive if your model is supported by Smart Switch yet, but I would suggest using Smart Switch as KIES has stopped official support for most of the newer models. If it's not supported yet, it should be soon. They keep adding devices. When I got my S6 Edge, it took about a week for it to be supported, but that's when Smart Switch had just come out too. Wish I was more help.
Anyone else have success getting this model to flash???

Bootloop
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.

I seem to be having the same issue. Tried to manually update my phone via Odin but nothing has worked so far.... Now I just get an error on my phone that says
"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
What am I missing here?? It's a Samsung phone, and it's been around for over a year (S6 Edge T-Mobile)...

ieatcalcium said:
I seem to be having the same issue. Tried to manually update my phone via Odin but nothing has worked so far.... Now I just get an error on my phone that says
"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
What am I missing here?? It's a Samsung phone, and it's been around for over a year (S6 Edge T-Mobile)...
Click to expand...
Click to collapse
If nothing else is working, you can try this for the T-Mobile S6 Edge. ONLY the T-Mobile S6 Edge is supported, so PLEASE verify it's the correct one.
https://mega.nz/#!H0hz2AQJ!iDzw_SwCL7qpJnZ8Y_8EDSrSgvAHK_hT93igXHOlm3A
It's a known working version of Odin, the Samsung Driver Package, and Firmware. Place your phone into Download Mode before using.
If any issues, let me know and we'll work through them.

SuperSport said:
If nothing else is working, you can try this for the T-Mobile S6 Edge. ONLY the T-Mobile S6 Edge is supported, so PLEASE verify it's the correct one.
It's a known working version of Odin, the Samsung Driver Package, and Firmware. Place your phone into Download Mode before using.
If any issues, let me know and we'll work through them.
Click to expand...
Click to collapse
No worries, I got it working! Thank you!
SOLUTION FOR ANYONE HAVING ISSUES STILL
1. Make sure you have Samsung Smart Switch Downloaded
2. Make sure Smart Switch is updated.
3. Click "more" across the top
4. Click "Emergency software recovery and initialization"
5. Click "Device initialization" across the top
6. In the model name box, type in exactly your model number. It is case sensitive. (for me, it was located on the back of my phone on the bottom named "SM-G925T)
7. It will then ask you for your serial number which can be found by holding POWER, HOME, and VOLUME DOWN
8. PROFIT$$$$$$$

Will this wipe the data like recorded audio and video files? This phone belongs to a friend with cancer and I'm trying to unload message he recorded for his family. I need to recover the data first and foremost and then getting the phone operation is secondary. I've got conflicting reports of what a firmware flash will do to recorded media files. I'm hoping the SDcard area will be unaffected but I need to know beyond a shadow of a doubt before I do anything.

Yes it will, it will behave like a factory reset. It will ask you to backup your storage content if it recognizes your phone you may be able to fix it.
Pp.

samanbabah said:
Do the following: open Kies, click on tools, Firmware upgrade and initialisation, enter your model number and serial number and let it download the firmware, after an hour or so depending on your connection speed the firmware will be downloaded and your phone will reboot into recovery to install the firmware. done
Click to expand...
Click to collapse
Thank you so f much!! I avoided waiting 8+ hours to download just the firmware. This method took less than half an hour!
*I dont know if doing something against the rules for replying to this really old thread but I am just thankful for this easy, simple method; I miss using the spen

Note 2 stuck at Start Up screen. Please help

My Galaxy Note 2 is stuck at the Start up screen screen. Where its an all black bg and simply says Samsung Galaxy Note II
I have tried using recovery mode, cleared cache, and reset to factory. Neither troubleshoot method worked.
I have tried numerous Odin autoroots. none work. Whenever I try to root it fails. Im guessing it might be because I dont have Dev Debug enable and I cant get into my phone to enable it. because of this issue
I have tried looking for TWRP .tar but every file I download the file is always a .img
The Model of the phone is a SGH-T889 (T-mobile Note II)
I am all out of ideas, and I dont know what to do. I have been search for answers for hours and everytime I think I found a solution it doesnt work.

What ROM was your phone on when this happened ?
Can you get int to download mode ? If yes try flashing stock ROM and see if it helps.

ciphercodes said:
What ROM was your phone on when this happened ?
Can you get int to download mode ? If yes try flashing stock ROM and see if it helps.
Click to expand...
Click to collapse
It was on the offical default rom. the phone was never modded, or rooted.
My niece downloads a bunch of kiddie games onto the phone, we constantly have to uninstall them. My thoughts and the T-mobile tech suspects that it the crash may have been caused my too many updates or a bad updated file most likely due to the games or game.
I can get the phone into download mode, and recovery mode.
In reovery mode I have 6 options
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cashe partition
apply update from cache
I have tried Apply update from cache, Wipe cache partition, then Wipe data.factory reset. I also attempted to put a CF auto root .md5 file and a KIES .md5 file which I believe is a stock firmware file on a SD card. to try to use the apply update from external storage option, but neither file showed up when I went into the option. So I guess I didnt have the right sort of file.
So recovery didnt work so I tried using Odin v3.07 and Odin v3.09 with CF auto root files for the SGH-T889, that didnt work, ecerytime I tried to apply it, It was always Fail within seconds. I tried other root files that are made for other versions of the Galaxt Note 2 like the GT-N1700 but those also simply failed.
I tried using what I believe to be stock frimware files with Odin. and those also Failed.
Im not exactly the best person with these. I learn mostly what I know from the internet and reading various forums, youtube videos, and other people experiences. I cannot find anyone who's problem has not yet been fixed through the above methods. so I really dont know where to go from here.
I think the reason I cant Flash from PC is because it might be possible USB Debugging is not enabled. Not sure if this is what is causing all the Fails in odin

BramaKnox said:
It was on the offical default rom. the phone was never modded, or rooted.
My niece downloads a bunch of kiddie games onto the phone, we constantly have to uninstall them. My thoughts and the T-mobile tech suspects that it the crash may have been caused my too many updates or a bad updated file most likely due to the games or game.
I can get the phone into download mode, and recovery mode.
In reovery mode I have 6 options
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cashe partition
apply update from cache
I have tried Apply update from cache, Wipe cache partition, then Wipe data.factory reset. I also attempted to put a CF auto root .md5 file and a KIES .md5 file which I believe is a stock firmware file on a SD card. to try to use the apply update from external storage option, but neither file showed up when I went into the option. So I guess I didnt have the right sort of file.
So recovery didnt work so I tried using Odin v3.07 and Odin v3.09 with CF auto root files for the SGH-T889, that didnt work, ecerytime I tried to apply it, It was always Fail within seconds. I tried other root files that are made for other versions of the Galaxt Note 2 like the GT-N1700 but those also simply failed.
I tried using what I believe to be stock frimware files with Odin. and those also Failed.
Im not exactly the best person with these. I learn mostly what I know from the internet and reading various forums, youtube videos, and other people experiences. I cannot find anyone who's problem has not yet been fixed through the above methods. so I really dont know where to go from here.
I think the reason I cant Flash from PC is because it might be possible USB Debugging is not enabled. Not sure if this is what is causing all the Fails in odin
Click to expand...
Click to collapse
Lets see if we can get this resolved.
1) Do you remember what version of Android the phone was on 4.3 or 4.1.2 ?
2) Put your phone in download mode then connect to your computer via usb. Start Odin in admin mode (right click and run as admin).
3) Now do you see ID:COM section turn blue ? Under message you can see "Added!". If you see this then phone is recognized by Odin.
4) If your phone was on 4.3 then download this most up to date firmware - from here http://www.sammobile.com/firmwares/download/22863/T889UVUCMK7_T889TMBCMK7_TMB/
5) Once downloaded, extract the file(use 7zip or winrar), once extracted you will see a file with .md5 extension.
6) Now going back to ODIN, click on PDA and then browse to this file which you just extracted.
7) This takes some time, once done you should see a message like "Checking MD5 finished successfully", "Leave CS".
8) You can leave Auto reboot and F-reset time checked.
9) Now click Start and let the process finish.
10) If everything goes fine you should see a green message "Pass"
Let me know how it goes.

I have the same problem as the OP (boots only up to Samsung logo with black bg) but it was not caused by niece downloading games but instead from trying to install jedi masterx2 rom.
I did what ciphercodes recommended and put phone in download mode and odin went through the motions of installing the stock os (in my case version 4.3) but after apparently installing the rom it again booted up to Samsung note II logo in black bg.
luckily I can install either Clockword mod recovery v6.0.4.3 or teamwin v2.8.6.0
The clockword mod recovery can read the external sd card (whereas funnily enough the teamwin can't) and I can attempt recovery from previous backups on cmr or to install a rom from zip file but neither of these work - reboots again to Samsung logo in black background after apparently installing the rom.
both teamwin and cwr mention that they can't mount system and that's probably why no rom is install either using cwr or odin so my guess is that I have to reformat the partitions cause probably efs file is corrupt but I don't know how to do that and I have done extensive search in google but have not found a solution
so ciphercodes if you or anyone reading this can help please reply to this message

ciphercodes said:
Lets see if we can get this resolved.
1) Do you remember what version of Android the phone was on 4.3 or 4.1.2 ?
2) Put your phone in download mode then connect to your computer via usb. Start Odin in admin mode (right click and run as admin).
3) Now do you see ID:COM section turn blue ? Under message you can see "Added!". If you see this then phone is recognized by Odin.
4) If your phone was on 4.3 then download this most up to date firmware - from here
5) Once downloaded, extract the file(use 7zip or winrar), once extracted you will see a file with .md5 extension.
6) Now going back to ODIN, click on PDA and then browse to this file which you just extracted.
7) This takes some time, once done you should see a message like "Checking MD5 finished successfully", "Leave CS".
8) You can leave Auto reboot and F-reset time checked.
9) Now click Start and let the process finish.
10) If everything goes fine you should see a green message "Pass"
Let me know how it goes.
Click to expand...
Click to collapse
I am uncertain of which version the phone was on. If you need I can call t-mobile and have them tell me which version it was on.
I did these steps. the file took a hour to download. and It still didn't work. I follow all steps down to the exact. and when I pressed start. within one second it said FAIL. just the other attempts I made.

BramaKnox said:
I am uncertain of which version the phone was on. If you need I can call t-mobile and have them tell me which version it was on.
I did these steps. the file took a hour to download. and It still didn't work. I follow all steps down to the exact. and when I pressed start. within one second it said FAIL. just the other attempts I made.
Click to expand...
Click to collapse
Unless your t889 Note II was sitting in a drawer and not being updated for the last year or so you probably have 4.3
When you go to download mode do you see "custom binary download: yes ..."
and do you see "knox warranty void:" ?
if so, your phone has been rooted.
but unlike your case, when I try to install stock rom through Odin, it goes through the motions of installing and gives message pass - that is that the stock rom has been installed, but unfortunately it has not installed any rom that my phone can read.

koyanishi said:
Unless your t889 Note II was sitting in a drawer and not being updated for the last year or so you probably have 4.3
When you go to download mode do you see "custom binary download: yes ..."
and do you see "knox warranty void:" ?
if so, your phone has been rooted.
but unlike your case, when I try to install stock rom through Odin, it goes through the motions of installing and gives message pass - that is that the stock rom has been installed, but unfortunately it has not installed any rom that my phone can read.
Click to expand...
Click to collapse
No it says
Product Name: SGH-T889
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Knox Warranty Void: 0
RP SWAEV: A2

BramaKnox said:
No it says
Product Name: SGH-T889
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Knox Warranty Void: 0
RP SWAEV: A2
Click to expand...
Click to collapse
Then you have an un rooted 4.3 rom because the 4.1.2 did not have knox

koyanishi said:
Then you have an un rooted 4.3 rom because the 4.1.2 did not have knox
Click to expand...
Click to collapse
Okay thank you, well then link ciphercodes gave me for the firmware was the right one. But still Failed. *Sigh*

BramaKnox said:
Okay thank you, well then link ciphercodes gave me for the firmware was the right one. But still Failed. *Sigh*
Click to expand...
Click to collapse
Since your phone is not rooted then I think that ciphercodes advice will not work as you can only install a stock rom that way only if your phone is first rooted.
Probably you should try to root your phone using instructions from this thread
http://forum.xda-developers.com/showthread.php?t=2562994
But this might not work for you as it could be that efs file is corrupted or something else as we both boot up to a black screen that only has Samsung logo

koyanishi said:
Since your phone is not rooted then I think that ciphercodes advice will not work as you can only install a stock rom that way only if your phone is first rooted.
Probably you should try to root your phone using instructions from this thread
http://forum.xda-developers.com/showthread.php?t=2562994
But this might not work for you as it could be that efs file is corrupted or something else as we both boot up to a black screen that only has Samsung logo
Click to expand...
Click to collapse
Yeah the chainfire root fail as well. I have tried every file for all the Galaxy II's including mines. none work. Always FAIL in Odin. I'm guessing there is just nothing I can do

BramaKnox said:
Yeah the chainfire root fail as well. I have tried every file for all the Galaxy II's including mines. none work. Always FAIL in Odin. I'm guessing there is just nothing I can do
Click to expand...
Click to collapse
Since your phone is not rooted you may be able to get it repaired under warranty. I think that Samsung warranty is only good for a year, but if you purchased your phone with a American Express gold card (I think other gold cards will also apply) your warranty is extended to double what the original was. So perhaps you have a chance to have your credit card pay for the repair.
Otherwise:
I am no expert but if you want to continue playing with your phone before you get expert advice you may want to play with the recovery mode. To enter recovery mode press volume up and home and power buttons at the same time. once you feel vibrate or after a while release the power button but continue to hold volume up and home buttons and then you will enter recovery mode. you may want to go to menu that says wipe data/factory reset and see if that works. It may be that it is like my phone and the system cannot be mounted in which case you will get that message. After you are through to get out of this menu remove the battery.
But please be aware that I am no expert and you are using this info at your own risk
but I think of doing something catastrophic using this advice in my non expert opinion is small.

koyanishi said:
Since your phone is not rooted you may be able to get it repaired under warranty. I think that Samsung warranty is only good for a year, but if you purchased your phone with a American Express gold card (I think other gold cards will also apply) your warranty is extended to double what the original was. So perhaps you have a chance to have your credit card pay for the repair.
Otherwise:
I am no expert but if you want to continue playing with your phone before you get expert advice you may want to play with the recovery mode. To enter recovery mode press volume up and home and power buttons at the same time. once you feel vibrate or after a while release the power button but continue to hold volume up and home buttons and then you will enter recovery mode. you may want to go to menu that says wipe data/factory reset and see if that works. It may be that it is like my phone and the system cannot be mounted in which case you will get that message. After you are through to get out of this menu remove the battery.
But please be aware that I am no expert and you are using this info at your own risk
but I think of doing something catastrophic using this advice in my non expert opinion is small.
Click to expand...
Click to collapse
Yeah the warranty is expired. and I have tried recovery mode. thats actually the first step before trying to apply a firmware. So recovery hasnt worked either. Guess I will just have to get a new phone. thank you all for oyu help tho. I apperciate it

I was just reading through the thread.. It doesnt seem like you tried flashing Tmobiles Stock 4.3 Firmware in download mode. If you tried to flash a 4.1.2 Firmware when the phone was already updated then I think thats where it failed. Try again but with the 4.3 Firmware through ODIN. After it finishes try rebooting it manually and/or if it doesnt boot again then go back into recovery and factory/data reset again...shouldnt hurt to try..

Double0EK said:
I was just reading through the thread.. It doesnt seem like you tried flashing Tmobiles Stock 4.3 Firmware in download mode. If you tried to flash a 4.1.2 Firmware when the phone was already updated then I think thats where it failed. Try again but with the 4.3 Firmware through ODIN. After it finishes try rebooting it manually and/or if it doesnt boot again then go back into recovery and factory/data reset again...shouldnt hurt to try..
Click to expand...
Click to collapse
From my knowledge the other person who first replied gave me 4.3 firmeware fild link. But in the chances of it could u provide me with a link to a 4.3 firmware u believe will work, because all the ones I found have not worked

Bricked Note 8 AT&T SGH-I467

I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?

Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
+1 on that, I'm stuck in an exact same situation. No help from Samsung either. After rooting with Kingroot my tab started acting like crazy with flickering screen and random reboots, did exactly like you did.
There are many with similar issue and as per my research most of them have given up. Getting a system image dump from a rooted tab running 4.4.2 might be the only way out. Unless of course Samsung/AT&T decides to release full odin flashable image.

I was in a similar situation from trying to fix a eff problem and took my sgh-i467 to a Samsung Experience Center located in many Best Buys and they fixed it free of charge. They were not able to fix my issue with a corrupted EFF file that is keeping my 4G from working though as I had hoped. If you have a Best Buy around with the Samsung Kiosk in it I would give it a try. I ended up trying a few different ones to fix the eff issue and some of the employees at the Samsung centers were about as smart as a head of cabbage (they laughed at me when I said my Note 8 was the issue and said "you can't have a Note 8 the Note 5 just came out") but some were at least helpful and listened when I told them they have the tools to fix my tab (reflash it back to life) and they did. Hopefully they can help you.

man Im in the same exact situation.. And I cant seem to find any help anywhere. I cant locate a stock 4.4.2 kit kat odin flashable file anywhere for the n5120

Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
please help me i need de 4 files repair from this tablet

Try the forum thread started by djjiz, https://forum.xda-developers.com/galaxy-note-8-0/help/i467-4-4-2-t3537302... He posted the files and yes I was able to bring back my previously bricked AT&T Note 8.

[Samsung] Galaxy Tab 3 SM-T210 / "Firmware upgrade encountered an issue"

Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie

Hyldran0 said:
Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Click to expand...
Click to collapse
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?

xdausernl said:
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
Click to expand...
Click to collapse
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.

Hyldran0 said:
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Click to expand...
Click to collapse
It is quite easy to turn the device off, for that to happen you have to press and hold the on/off button. You'll see that the device will shutdown and try to reboot and then finally shuts down again and stay off, then release the on/off button.
Are you sure trying to flash the correct firmware with correct changes, etc??
Please share with us the device and Android version, as well as the stock ROM version with changes you're trying to flash.
Put (copy and paste) the output of Odin below.
Another way to get the firmware flashed is by using Heimdall, but for that to happen you first need to rename the extension of the stock ROM (remove .md5 and leave .tar) and than extract all seperate pieces that are contained within the stock ROM.
All those extracted pieces from the stock ROM you have to upload seperately onto Heimdall and try to flash them to your tablet, one by one.
Heimdall you'll find 'here' or use FWUL instead which has Heimdall pre installed, download is to be found 'here' and install it on a USB medium a stick, to put FWUL onto USB, use Balena-Etcher and the download is to be found 'here'.
Micro USB cable does work, but if you're unsure, try another one and make sure using the correct drivers too.
Using Odin, make sure the tablet is recognised and 'connected' in Odin, also make sure 'repartitioning' is unchecked.
If you've used the wrong Odin version, flashing will fail!

You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!

Hyldran0 said:
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Click to expand...
Click to collapse
You're welcome.

Hi, complete novice here, does anyone know where I can get a working Firmware for my Tab 3 v7 (SM-210)?
I have searched through various forum articles here, and tried to install with several builds but none will install. The only one that gets anywhere near is the JASBR build by gr8nole. It appears to install, but on restart, the TAB just sits on the "Samsung Tab3" start screen.
I read that I may need to flash the firmware 4.4.4 (Kit Kat), but can't find it!
The unit is not totally bricked (yet), as I can run TWRP 2.8, with which I created a backup of the original build, but when I try to restore the backup, it fails at just over 31%.
Can anyone help please?