Android 4.4 Reversing Camera Mirror With A10,A23,A33 CPU
These mirrors come in many different flavours now. At time of edit post A33 x5 quadcore is the latest with 16GB. This newer unit can be rooted with kingroot apk version. I find I lose root after reboot for some reason. I haven't found a firmware for this mirror version as of yet. For some reason my mirror does not have a wifi antenna attached so poor signal unless 4 meters line of sight. Please becareful as from experience from buying 3 mirrors now, there can be huge differences to build quality even thou they look the same.
I'm not updating this thread with RT01 firmware anymore. Please check Baidu link below
Also need this to load firmware to TF/microsd
PhoenixCard_V310_20130618.rar
To load new firm run Phoenixcard - Select image - Insert TF card/ Microsd - Choose burn (Try until magic) - Insert Tf Card into mirror and shutdown - After mirror firmware loaded you must format to normal or Tfcard will flash mirror again on reset
You may also find your firmware here. Let me know if you can't download it(use iPad to view)
http://pan.baidu.com/wap/share/home?uk=4026862827&third=0
Yfgo.apk - Radar program (you need mirror with radar function)
Yfgo.apk
Thx to nyinyiwale
How to get root access:
Download this settings.apk and run it! Thanks to Nick Nick
Setup.apk (A23)
Now you should have developer options - Enable usb debugging
Now install on windows machine http://pdanet.co/ for android
Then install kingo root http://www.kingoapp.com/android-root/download.htm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications
Processor - Allwinner A13 Cortex A8 1.2GHz Dual Core
Smart systems - Android 4.4 OS
Screen - 5.0 inch HD 5 point touch screen
Diplay resolution - 800X480 pixels
DDR - Built in 512MB DDR 3
Nand Flash - Built in 8GB (systems will occupy 1.72GB )
External storage - Support Maximum 64GB TF card(not included)
Image Sensor - 5.0 million pixel HD camera, 350 degree rotate front lens
Lens angle view - Front 140 degree +back 120 degree
Video Resolution - Front: 1920*1080(30f/s)/HD1280x720(30f/s) - Rear: 640X480 30f/s
Video format - MP4
Picture format - JPEG
Compression - H.264
Speaker - Built in
MIC - Built in
External I/O port
1*USB 2.0
1*TF card port:
1* GPS port
1*AV IN (support auto reverse function)
Dimensions - Main product size: 310x90x20mm (L x W x D)
Just got this item off eBay. Url removed
Screen looks great. Touch screen works a treat. Nice and bright and good angle also.
There are a few things different listed that the seller on eBay has not listed correct.
It comes with android 4.4.2 And not 4.0
Has a A23 dual core and not A10
Kernel version 3.4.39
And it has a battery which would last a couple of days with no use - make sure you turn off wifi when not on power
This is a true android with some very basic functions missing. Starting it has no google services. So no google play store, no where to login to google account in settings. The launcher looks good(you can't change it) expect there is no access to app list. You can click on navi button - which holds no navigation software funny enough. Once inside the navi button you can hold on the screen and then it brings you up a app selection screen giving you option to add icons(still no gps map softwares)
Once connected to Internet apps start updating when you open them which is pretty cool.. There is an update option under andriod version screen which fails to find any update with an error(searches Internet for update or you can local upload file).
Overall I'm pretty impressed with this device and its speed. I was able to install google maps by browser. But once I closed it I could not open it again cause no icon to click on. Google maps ran a little bit sluggish but was acceptable. I'm now chasing the seller for a solution to google play store as the play store ask won't open after installing.
I was able to side load apps quite easily with the browser. Seems most work if the don't depend on play store or accounts being setup in google settings.
Synic gps software won't work as it wants to use playstore to download more files.
Es explorer works fine.
I don't think I will be able to get root access as there is no developer menu, but after clicking on firmware build number says you are already a developer
i have this one and have Google playstore, i have installed nova launcher without problem, all is fine
Hi, is it model rt01?
Do you have the same firmware 4.4.2 and specs?
Does it have an option to add google account inside android OS?
As mentioned above no google account in my OS which means no history in google maps. Very frustrating.
Could I also grab the seller as I my have to purchase a new one
Thank you if you can help
hello, i bought mine to this seller from Aliexpress, received in 8 days via DHL
http://fr.aliexpress.com/item/5-inch-Android-Mirror-Monitor-GPS-1080P-Digital-Video-Recorder-Rear-view-Camera/2021095296.html
The item has exactly the spécifications as described from top of topic and is a rt01 model, else allwinner A23 Inside, android 4.4.2 KitKat Inside
i have in native Google playstore and i have created my account without problem as soon as i powered up for the firs time the mirror
best regards
Thanks for your help appreciated.
Need to try a scab a firmware update as my seller refuses to speak with me now.
Might just buy what you got I think.
you can try to communicate via aliexpress with the store, seller is Mr wilson cao and ask him for a firmware, it's a pleasant person who respond to me very fast, also after my purchase for details. Try to say you're a friend of me (Superboost) and have same miror and you want the same OS, give a try, good luck.
---------- Post added at 06:38 PM ---------- Previous post was at 06:32 PM ----------
at this time i'm trying to root for install some progs. Framaroot = KO, kingroot not able to connect at his cloud for exploit. At this time not result. If i can, also put a twrp or other and save firmware and tranfer to you? Have an idea of rooting ?
I have seen a update.zip file for root on the net. I was thinking doing it that way.
I'll give it another go as I was more focused on gapps.zip before.
Do you have development option to activate usb debugging? I don't have this option, so it makes it hard for me.
That's why I suggested an update.zip method.
If you have usb debugging (lucky you) then try http://www.shuame.com/en/root/
Also sent a msg to your seller. I think he would have to be very nice to give time for nothing being a business man
I have not the "usb debugging option" and no more the menu security for the possibility to "accept unknown sources" option. I think it will be impossible to root the item.....
tell me if you have a response from seller, have a good day
I was going to try to enable usb debugging by a terminal command but gave up after I couldn't install gapps
Try this maybe
http://forum.xda-developers.com/showthread.php?t=893434
hello, i have installed usb drivers of the mirror (hold down volume button and plug USB) and found an unknown device, i downloaded livesuit pack V1.9 and in the usb directory, it found the driver.
Now i can lauch livesuit but it wait for an .img image file for flash.... that's all for this time.... perhaps a way for future rooting?, have a good day
Your seller is very nice.
Thank you also.. Now have to work out how to install
This is a link I found on google
http://pan.baidu.com/wap/link?uk=4026862827&shareid=3212962299&third=0
Link from your seller
http://en.mail.qq.com/cgi-bin/ftnEx...1e4459433274&t=exs_ftn_download&code=231c0681
hello, happy for you, i expect you can flash this firmware and having opérationnal Google on it.
This seller is very nice, i put it a 5+++++ stars on aliexpress
have a good day
It's a puzzle..
You have an img file.. And Phoenixcard..
Putting in sdcard and selecting startup it puts the android OS on the sdcard and you boot from that so you can test the image I suppose.
Could not see any google account. Also I have alarm next to the radio icon. When I put this one on I got the browser instead.
Can I ask under settings about tablet is your build number 20150410 ?
in the info i have : rt01-eng 4.2.2 KVT49L 20150410 test-keys
It's seem that is the same build than downloaded
perhaps puting applications in "download" folder of the program will put them on the image for flashing ?
Thank you so much. You are a legend.
Its as I figured.
running the phoniexcard program you select Startup to run off sdcard.. which is way slow.
So I took the plunge and hit production and it setup my sdcard which in turn updated my unit.
Now its usable and I cant thank you enough!
have you all you want in ? Google account possible? the next challenge : rooting...
---------- Post added at 01:24 PM ---------- Previous post was at 12:45 PM ----------
Because it's difficult to find this firmware, i put it on a Mega download
https://mega.co.nz/#!ZEwxzAyJ!HzowmA3-bVbcCdZpY7tHsQ5sV2kLQ8d6lwX6Y4Q0IXY
It include the program Phoenixcard for generate the bootable SD card for update firmware
for someone else who search
Yes rooting is on the cards now...
Just enjoying play store for the moment..
Plus I've noticed a huge increase in speed.
Large improvement in firmware need to keep eye open for future releases
Related
FROYO x RED CAMERA 2011.02.24 FOR BLACKSTONE
I'M STILL UPDATING THIS THREAD FOR NEW BUILD
THANKS TO neopeek AND midnight FOR THIS
First off, there is an insanely huge list of guys who are responsible for making this possible.
Thanks to phhusson, dbz, Stinebd, ACL, arrrghhh , viruscrazy, WisTilt2, Klinux, kama, Reefermattness, chkms, davidebeatrice, elroy944, kstephens98, DracoLX, zenulator, Chamonix, Makkonen, Mrpippy, cr2, Markinus, Babijoee and anyone else forgotten!. I WILL ADD MORE
Thanks to those who have already helped, and to those who will. THANK YOU!
THANKS TO F22 FOR HIS KERNELS
THANKS TO VIRUSCRAZY FOR HIS CAMERA KERNELS
THANKS TO Stickman89 FOR HIS Latest Rootfs + Corrected key mapping for Blackstone
GUYS, I'M NOT A DEV. I JUST HELPING PEOPLE.
FROYO X RED CAMERA 2011.02.24 FOR BLACKSTONE
CHANGE LOG
0- MMS SHOULD WORK FOR GSM
1-MOD BUILD.PROP
2-better gps and location.
3-add it Japanese IME. make sure to unchecked Japanese IME in setting to English (language & keyboard setting)
4-wifi works
5-modprobe ipv6 support. add it ko driver to modules for support
6- zeam launcher
7-add it (rm -f /sdcard/*.rec) to the froyo.user.conf. you will not see those FSCK files any more in wm
8-auto backlight for keyboard. need to change kernels camera, 1250 or 1253
9- speaker phone. need to change kernels camera, 1250 or 1253
10-new market
APPS
1-ASTRO
2-BROWSER
3-CALCULATOR
4-CALENDAR
5-CAMERA.APK
6-CAR HOME
7-CLOCK
8-CONTACTS
9-DEV TOOLS
10-EMAIL
11-GALLERY
12-GMAIL
13-MAPS.
14-NEW MARKET
15-MARKET ENABLER
16-MESSAGING
17-MORELOCALE 2
18-MUSIC
19-GENIE WIDGET
20-SETTINGS
21-SPARE PARTS
22-SPEECH RECORDER
23-SUPERUSER
24-TALK
25-TAPATALK PRO
26-TITANIUM BACKUP
27-VOICE
28-VOICE DIALER
29-VOICE SEARCH
30-WIRELESS TETHER
31-YOUTUBE.
NOT WORKING IN THIS BUILD
1-Bluetooth- still working on this. not working on rhod. please try for you phones
2-3.5mm headset jack
3-Notification LED-doesn't notify, but just outputs whether device is in sleep or active
PREPARE YOUR SD CARD
1-FORMAT YOUR SD CARD TO FAT32. FULL FORMAT
2-DOWNLOAD FROYO X
3-UNZIP IT INTO YOUR SD CARD. ANDBOOT OR TO ROOT SD CARD
4-USE YOUR STARTUP.TXT FOR YOUR DEVICES. ADD THIS COMMAND YOUR STARTUP. rel_path=andboot. OR WITH YOU PUT EVERTHING ON YOUR ROOT SD CARD YOU DON'T NEED TO ADD THIS TO YOUR STARTUP.TXT
5- for cdma devices. add this command for the camera on your startup. board-htcrhodium.is_cdma=1
for gsm devices. add this command for the camera on your startup. board-htcrhodium.is_gsm=0.
FOR CDMA PHONES. REMOVE THE SIM CARD
6- for cdma & gsm devices make sure you have this command on your startup for data. force_cdma=1. for gsm devices is force_cdma=0
THINGS YOU NEED
Current Kernel Builds
http://glemsom.users.anapnea.net/android2/htc-msm-linux/
Current rootfs Builds
http://files.xdandroid.com/rootfs/
Current initrd.gz Builds
http://files.xdandroid.com/initramfs/
Frequently Asked Questions
http://sites.google.com/site/androidport/faq
FROYO x RED camera Install
THANKS TO bassiebal
So I noticed there wasnt any tutorial on how to install it and you just had to search all the posts in the froyo x thread to figure it out. Now I have done it this way.Im sure there are tons of other ways.But this one workes for me and I just want to share it. I will try to keep it up to date so everybody can install android on their blackstone.
All credits to Tiad8 and other developers this is not my build!
special thanks to TRNSLN who helped me install froyo so I can help you
Anyway first things first. Is this something for me to use daily? well here is your change to figure out.
My homescreen+menu+latitude
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
proof the camera works
Sample video(shot with blackstone)
[http://www.youtube.com/watch?feature=player_detailpage&v=OrYAP99pZI4][/YOUTUBE]
screenshot camera app:
sample photo(shot with blackstone) click http://img814.imageshack.us/img814/6485/img20110224231634.jpg for full image
So is this something for you?
whats working and whats not?
wifi/3G/sync =Ok!
market =Ok!
latitude =Ok!
Headphones =Ok!
messaging/calling(call/receive) =Ok!
Bluetooth =testing..
Battery =10/11 hour
Usb =No (at least not with standard app, there have been reports of usb via other program havent tested it yet)
Chapters of this tutorial:
[1]Formatting SD card
[2]Installing Froyo X red
[3]Installing Camera
[4]Finishing up
Downloads
1 Froyo X Red http://www.multiupload.com/16UTFCYLTA
2 kernel+libs http://www.multiupload.com/YGVM8VELPV
3 Haret+Startup.txt-Ts-Calibration http://www.multiupload.com/33Z52W8L14
4 If having problems with booting android try this startup.txt
[1]Formatting SD card
Easy as pie.
put your memory card in a sd card reader (your blackstone will do fine) and plug it in your pc/laptop.
open My pc and look for your memory card and right click on it.
Click Format
http://img37.imageshack.us/img37/3646/16774455.png
Ok great Sd card is formatted and ready to go. no lets move on..
[2]Installing froyo X Red /B]
ok first things first download Froyo X Red and Haret+Startup.txt-Ts-Calibration.
Then unpack Froyo X Red to the root of your memory card(root means on your memory card not in an folder on your memory card)
Then open up Haret+Startup.txt-Ts-Calibration and copy all the files to the root of your memory card.
Now unmount your Blackstone or Sd card reader from your pc.Put the Sd card in your blackstone(if it isnt already there) navigate to your storage card and open the file Haret
Now it shoud just give you a bunch of text and a little linux penguin let it load for a while(note: It coud take some minutes so dont think it wont boot)
it shoud boot. now follow the set-up and sync your google account.then turn off your blackstone and reboot it.so it boots in windows mobile again.when its in windows mobile go to the next step!
[3]Installing Camera
so android working accordingly everything set up but still no camera..
its time to change that
download kernel+libs
simply unpack the zip to your memory card..
overwrite zImage
thats that your done. enjoy android with working camera!
[4]Finishing up
this isnt really a neccesary step but I do recommend it.
open up spare parts and set the Window animation and Transition animation to Fast
and your done! have fun with your brand new Android phone..
dont forget to check this thread for updates!
Ts-calib for Blackstone. Rmove extension and put it in your andboot folder.
You will also need the "lib_camera" folder in the root of your SD-Card for camera to function. This is missing in this ROM distribution, but you can find the link for it in the first post here: http://forum.xda-developers.com/showthread.php?t=883966
Is this FroyoX build of yours still based on the Huawei U8150 from Neopeek? Just wondering of curiosity.
Hello,
I just tried with the 3 different camera modules, and with and without oc.
I used calibration from this thread and also from an older install of mine.
Find attached my STARTUP.txt.
I always have the same result.
Haret Booting OK
Passing Boot animation OK
Unlock SIM card OK
Then during the setup process, after clicking on the droid, it freezes and the image stay put, I can not do anything but soft reset. It does it at different stages: Time setup, or google account setup, or location setup...
If there is a way I can give you more information about what's going on please ask.
Cheers,
ok for those who are having crashes from setup screen: THIS IS WHAT WORKED FOR ME ON MY BLACKSTONE AND MY WORK WITH OTHER DEVICES!!
OPTION (1)
1) WHEN YOU REACH SETUP SCREEN REMOVE SIM CARD ONLY.....NOT BATTERY!
2) NOW CARRY ON WITH SETUP SCREEN AND SKIP EVERYTHING IT MAY FREEZE FOR 5SEC OR SO JUST WAIT!
3) NOW YOUR AT HOME SCREEN NAVIGATE TO (SETTINGS, WIRELESS & NETWORKS, MOBILE NETWORKS, ACCESS POINT NAME.......CHOOSE YOUR PROVIDER!
4) NOW THAT YOU HAVE PROVIDER AND IT HAS A GREEN DOT TO THE RIGHT OF IT YOU NEED TO POWER OFF YOUR DEVICE!
5) REPLACE YOUR SIM CARD AND POWER UP IN WM AND THEN RUN HARET AND YOU SHOULD BE GOOD TO GO WITH NO FREEZING IF YOU HAVE THE 3G ICON SHOW IN YOUR STATUS BAR AT THE TOP!!
OPTION (2)
THIS REQUIRES SPEED BUT WILL WORK BUT YOU HAVE TO BE FAST YOU MAY HAVE TO REBOOT LEAST 3 TIME BECAUSE IT MAY FREEZE!
BOOT HARET WHEN YOU REACH SETUP SCREEN THIS TIME LEAVE SIM CARD IN BUT TRY TO SKIP EVERYTHING AS QUICK AS U CAN, TO GET TO HOME SCREEN, IF YOU MANAGE TO GET TO HOME SCREEN THATS THE SETUP PROCESS DONE, IF YOUR PHONE FREEZES RESTART IT AGAIN YOU SHOULD BE AT HOME SCREEN THIS TIME, YOU NEED TO GO TO (SETTINGS, WIRELESS & NETWORKS, MOBILE NETWORKS, ACCESS POINT NAME.......CHOOSE YOUR PROVIDER THEN GO BACK 1 THEN GO TO NETWORK OPERATORS AND SELECT AUTOMATICALLY IT WILL SEARCH THEN AFTER 10 SECONDS FREEZE...........REBOOT AND YOU SHOULD BE GOOD TO GO! (NOTE YOU SHOULD DO THIS QUICKLY FROM WHEN YOUR HOME SHOWS HOME SCREEN BECAUSE IT WILL FREEZE WITHIN 40 SECONDS)
i know it alot of messing around but its worth it,........if you want to try this build out because its fast fast fast!!!!!
hope it works for you all
These issues are been delt with ive been told in the nxt update............no camera working at the moment
Thank you, that helped.
Now testing other functionalities.
I changed end button mapping to "back home" as it seems it had same mapping as power button initialiy. I also put animations and transitions to fast.
I synchronized my google account and gmail/contacts/agenda are fine.
I'll keep you up to date. But, so far, this is definitely the best versions I ever tested. It is amazingly fast!
This is awesome work!
UPDATE1:
- Wifi : not OK.
This is a shame because as I do not have data plan, it means I can not download apps from the market without wifi, and I would really like to download some apps. I would really appreciate a fix!
- Gallery: OK
- SMS receive and send: OK
- Camera: Not OK
- Music Player: Partially OK because there audio stuttering (note: is this applicable to this version: http://forum.xda-developers.com/showthread.php?t=905085&page=4)
Update2:
-Wifi is OK (just has to change zImage and modules)
- Market: OK (download apps included)
Update3:
- Screen orientation OK
- Talk OK
So far no freeze or sluggishness. Amazingly fast.
Everything works perfect! Even the live wallpapers are working! Thanks to the developers...
Wow! Can confirm this is a lightning fast version!
Especially WIFI I've never seen so fast on FROYO build, could not believe my eyes, much appreciated!
(note: for some reason added modules and zkernel could not get WIFI to work, tried several things, but in the end changed to latest kernel (1253) and got amazing results!)
Camera would be nice, could you also check if "sound stuttering" is fixed in next build?
(as you probably already know, VirusCrazy managed to disable battery polling during sound playback in test kernel http://forum.xda-developers.com/showthread.php?t=883966)
Final note: keymapping is still wrong for blackstone, power button can be mapped to home, with long press to latest programs, see also http://forum.xda-developers.com/showthread.php?t=936601
All in all, great start, can't wait to see next steps!
Cheers,
Robbert
Blackstone, 524MHz, FROYO X 2011.02.02
littlewhitedog said:
Thank you, that helped.
Now testing other functionalities.
I changed end button mapping to "back home" as it seems it had same mapping as power button initialiy. I also put animations and transitions to fast.
I synchronized my google account and gmail/contacts/agenda are fine.
I'll keep you up to date. But, so far, this is definitely the best versions I ever tested. It is amazingly fast!
This is awesome work!
UPDATE1:
- Wifi : not OK.
This is a shame because as I do not have data plan, it means I can not download apps from the market without wifi, and I would really like to download some apps. I would really appreciate a fix!
- Gallery: OK
- SMS receive and send: OK
- Camera: Not OK
- Music Player: Partially OK because there audio stuttering (note: is this applicable to this version: http://forum.xda-developers.com/showthread.php?t=905085&page=4)
Click to expand...
Click to collapse
TRY USING THE OTHER kernel_module + ZIMAGE IN PACKAGE.........WIFI WORKS FOR ME
All thanks to tiad8 for making it possible on our blackstone!
welard said:
TRY USING THE OTHER kernel_module + ZIMAGE IN PACKAGE.........WIFI WORKS FOR ME
Click to expand...
Click to collapse
Thanks, it did the trick. I updated my first post and will keep testing!
littlewhitedog said:
Thanks, it did the trick. I updated my first post and will keep testing!
Click to expand...
Click to collapse
what about the battery ? does it stay alive for more than one day ?
tarmacmaster said:
what about the battery ? does it stay alive for more than one day ?
Click to expand...
Click to collapse
I will keep you up to date with the result after this week end. Today is not really a typical day because I rebooted a lot, changed versions this morning.
littlewhitedog said:
I will keep you up to date with the result after this week end. Today is not really a typical day because I rebooted a lot, changed versions this morning.
Click to expand...
Click to collapse
ok ! I'm looking forward to see how much it can stay alive with this FROYO
well
hmmmm
froyo X always worked for my blackstone
Hi
On my blackstone
WiFi don't work
Camera don't work (i try three kernels)
Can you help me?
Hello everyone! In this thread you will find small review and tips related to the Thl 5000 smartphone.
ThL 5000 Smartphone Highlight:
- 5.0 inch screen, 1920 x 1080 pixel display
- Support 3G network: GSM 850/900/1800/1900MHz WCDMA 850/2100MHz
- MTK6592, Cortex-A7 Octa core,2.0GHz
- 13MP back camera + 5MP front camera
- 2GB RAM + 16GB ROM
- Android 4.4
ThL 5000 Smartphone Basic Parameter Information
Model: ThL 5000
Band: 2G: GSM 850/900/1800/1900MHz
3G: WCDMA 850/2100MHz
Service Provide: Unlocked
Color: Black
Shell Material: Plastic
OS: Android 4.4
CPU: MTK6592, Cortex A7 octa core, 2.0GHz
GPU: Mali-450 MP4
ROM: 16GB
RAM: 2GB
Display Size: 5.0 Inch
Type: IPS, capacitive touch screen, Corning III gorilla glass, OGS technology
Resolution: 1920 x 1080 pixels
Screen Color: 16000K Colors
Camera/Picture Resolution: Dual Cameras,5.0MP front camera, 13.0MP back camera with flashlight and auto focus, support full screen caputuring
ThL 5000 Smartphone Basic Function
Ringtones Type: Polyphonic/MP3
Audio File Format: MP3/WAV/AMR/AWB
Video File Format: 3GP/MPEG4
Image File Format: JPEG/BMP/GIF/PNG/GIF
E-book Format: TXT/CHM/DOC/HTML
FM Radio: Yes, earphone needed
Earphone Port: 3.5mm
Data Transfer & Connectivity
Data transfer: USB/Bluetooth
Mobile internet: WAP/WiFi
Phonebook: 500
Message: SMS/MMS
Input: Handwrite/Keypad
TV: No
GPS: Yes, built in
JAVA: No
WIFI: Yes, 802.11 b/g/n
Bluetooth: Yes
Gravity Sensor: Yes
Multi-Touch: Yes, 5 point touch
Language: English, Bahasa Indonesia, Bahasa Mealyu, Cestina, Deutsch,Espanol, Filipino, Francais, Khmer, Italiano, Magyar, Nederalands, Portuguese, Romana,Vietnamese, Turkish, Greek, Russian, Hebrew, Arabic, Thai, Korean,Simplified/Traditional Chinese
Other Feature: 3G, WIFI, GPS, FM, Bluetooth, Ebook, Email, Messaging, wallpapers,calendar, calculator, clock, camera, tethering & portable hotspot, NFC, OTG, Play Store, etc
ThL 5000 Smartphone size: 144.2 x 70.4 x 8.9mm
ThL 5000 Smartphone Weight: 146g
ROOT:http://www.thlmobilestore.com/news/thl-mobile-phone-root-method/
After you root your phone you can install supersu from playstore and you ready.
You can also root it with the installation of twrp.
RECOVERY:http://www.needrom.com/mobile/recovery-twrp-2-7-1-0-kk-for-thl-5000/
Download from playstore and use MobileUncle to flash recovery, place .img file into root of your memory.
you have to have the twrp-2-7-1-0-kk-for-thl-5000 recovery.img file of your phone before you flash it put them in your sd card
Instruction :-
1 first root your phone
2 install mobile uncle tool.apk
3 open mobile uncle tool
4 select flash recovery then select the twrp-2-7-1-0-kk-for-thl-5000 recovery
5 then reboot your done with flashing recovery
Another way to install the twrp is with the flashtool, download it from needrom also download the factory rom from needrom, run the flash tool program locate the scatter file in the factory rom then go to recovery and locate the twrp file uncheck all the files except the recovery file ,then change to download only and press download, this procedure must be done without the phone connected, after you press the download button switch off your phone then keep pressing the red reset button behind the first sim slot insert the usb cable and then release the reset button the procedure should start if the procedure don’t start it means that you’re missing the preloaded drivers of mtk.
With this way you can also installed a factory rom.
Tips:Xposed Framework and Gravity box after the latest update v3.4.0 are working perfect.
For Titanium Backup and Mobileuncle to make it work,change the supersu,install this:
https://play.google.com/store/apps/details?id=com.koushikdutta.superuser
if you want you can download the zip file and install it from twrp.
Factory roms:
http://www.needrom.com/download/thl-5000-16p128-mt6592t/
The latest version v1.0.8 can be update only from flash tool,fixed status bar lag,very fast more free ram,and wifi show connected but no internet access fixed.
Some pictures and info about the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great device
HHow about battery life and screen on time?
Yes excellent device, I have received the phone yesterday and I was trying to root it and installed the recovery so I don't have screenshots of the battery yet, one is thing is that the phone was at 4% the previous day and it last about 2 hours of 3/4 of use before it shut down.
aymnga said:
Great device
HHow about battery life and screen on time?
Click to expand...
Click to collapse
this phone is almost perfect! sucks there is not a 900/2100 3g unit
i'm predicting 10 hours screen on time
Thank you for this post, I'm considering this for my next phone and I was wandering about rom customization. The original rom is good?
I don't know this brand, I'm wondering if it is compatible with cyanogenmod or miui, do you know?
saken.sf said:
Thank you for this post, I'm considering this for my next phone and I was wandering about rom customization. The original rom is good?
I don't know this brand, I'm wondering if it is compatible with cyanogenmod or miui, do you know?
Click to expand...
Click to collapse
Compatible with MIUI, it is easily ported throughout all mtk6592 devices. Not cyanogenmod though
It seems that the major drawback for development is mediatek not releasing the source codes, but they seem to be trying to change, they opened the mediatek labs to give support to developers. Don't know how this will work though... I hope they finally release the source codes soon.
Edit: I've seen a video stating this phone has an amprius battery, it's a company that is supposed to be making major breakthroughs in battery development... anyone knows how to confirm this?
saken.sf said:
this phone has an amprius battery,
Click to expand...
Click to collapse
This phone has a 4.35v 5000mAh 19.00Wh Silicon Anode Lithium-polymer (Li-po) Battery.
Amprius (Brand) is Lithium-ion (Li-ion) .... (Google it) ... http://www.amprius.com/
I'm leaving mine alone until the warranty runs out....Might root it though.
I'm just put in 'Next Launcher Pro' and using that rather than the MiUi.
The original rom is actual pure android with some themes,if you install the xposed framework and gravity box you can edit the rom as cyanogenmod,about miui sure,cyanogenmod i do not think so.
saken.sf said:
Thank you for this post, I'm considering this for my next phone and I was wandering about rom customization. The original rom is good?
I don't know this brand, I'm wondering if it is compatible with cyanogenmod or miui, do you know?
Click to expand...
Click to collapse
Im unable to root this phone
I have try this guide and also vroot and root genius
Someone wad able to root it and in which way?
Thank you
I had root my phone with the tool that I had provide in instructions, does the tool recognize the phone? In some point after few minutes it will say thl 5000 and press the green button to proceed and root the phone.
luzer600 said:
Im unable to root this phone
I have try this guide and also vroot and root genius
Someone wad able to root it and in which way?
Thank you
Click to expand...
Click to collapse
Yes I try this way and recognize the phone thl 5000 but doesnt work
I have use that on my thl t11 and on it it works but fail for my thl 5000
You can try a different way, just install the rcovery in the link that I have provide follow the instructions there and when you boot into recovery mode and exit it will ask you if you want to root your phone.
luzer600 said:
Yes I try this way and recognize the phone thl 5000 but doesnt work
I have use that on my thl t11 and on it it works but fail for my thl 5000
Click to expand...
Click to collapse
I have solved thanks the suggestion of a needrom user
I have made a factory reset then i have used Vroot (Chinese version) and the root works
Make that I install superuser from the play store which automatically replace the Chinese version of superuser
Thanks to everyone for the help
Got 2 of those in the mail
<Sorry if this is a little off-topic>
My first concern was the GPS - so I rooted one of them, installed MT GPS EPO Fix, FasterGPS & GPS Status.
GPS seems to zero in after 2 seconds. I'd like to note that when "sensor filtering" was set to "none" in GPS Status, it would see the satellites but not acquire a fix. With any other option it's ok.
(I didn't test the performances before applying these mods - I'll try it with the other phone later)
MT GPS EPO Fix - h**ps://play.google.com/store/apps/details?id=com.chxdev.mtgps&hl=en
FasterGPS - h**ps://play.google.com/store/apps/details?id=org.fastergps&hl=en
GPS Status - h**ps://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2&hl=en
Anyone get their fitbit working with this phone
I love my fitbit but its recently not working with this THL 5000 although its supposed to support BT LE...
anyone know how to fix this?
Ok somehow I managed to bootloop the device. Can anyone help me to get this thing into recovery?
If you keep pressing power and volume up does it boot to recovery mode?
FSN said:
Ok somehow I managed to bootloop the device. Can anyone help me to get this thing into recovery?
Click to expand...
Click to collapse
I want to ask some other users of this phone, does anyone notice the lag of the notification bar sometimes it doesn't want to be slide open, is this only on my phone, and also the wifi after a while without using the phone somehow it shows that it's connected to the network but there is not internet and I switched on and then off the wifi and everything is ok, anyone?
Panick_mg said:
If you keep pressing power and volume up does it boot to recovery mode?
Click to expand...
Click to collapse
It didn't go to the recovery mode, but I got it to work again with the help of these posts:
XDA-Post
Needrom article
Panick_mg said:
I want to ask some other users of this phone, does anyone notice the lag of the notification bar sometimes it doesn't want to be slide open, is this only on my phone, and also the wifi after a while without using the phone somehow it shows that it's connected to the network but there is not internet and I switched on and then off the wifi and everything is ok, anyone?
Click to expand...
Click to collapse
I had the same problem with the network, but it seems to be gone now. I don't know what is was related to
Iwown I5 Plus Smart Bracelet.
Manufacturer: http://iwown.com/en/Bracelet/2015/0203/32.html
E-mail: [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recommended: Annotate Initial firmware version 1.1.0.x or 1.0.0.x
Warning:
There are two versions.
Initial Version 1.0.0.x no compatible whit 1.1.0.x and viceversa.
If you charge incorrect firmware and try update to version 2.0.0.x zeroner download a incorrect version.
Firmware version 2.0.0.x for initial vesion 1.0.0x is diferent that 2.0.0.x for 1.1.0.x
if you have made an update official from zeroner App, into zeroner folder will be a . hex file, check file size, According to the table below.
If don´t exist .hex file, try to update from Zeroner, but no push Update, so check file .hex donwloading into Zeroner folder.
Trick to know the version of a downloaded firmware.
Firmware 1.0.0x file size . hex ~137 - 138 KB. -----> Firmware 2.0.0.x ~ 180 KB.
Firmware 1.1.0x file size .hex ~ 142 -143 KB. -----> Firmware 2.0.0.x ~ 184 - 186 KB
Remember choice correct firmware.
There are two possible combinations of software and firmware.
Firmware 1.x.x.x -------Zeroner Version 2.x
Firmware 1.x.x.x only screen Horizontal, camera and find phone funtion, lost Step when power off, notificacions work ok.
Last zeroner v2.2.0: https://play.google.com/store/apps/details?id=com.kunekt.abroad
Mirror: http://uploaded.net/file/i2xfwnnt/Zeroner220.apk
Last firmware: v1.1.08.
http://uploaded.net/file/gjsdgdzt/v1108.hex
http://www.mediafire.com/download/a1rd7yodaq6eiu2/v1108.hex
Last firmware 1.0.0.24:
http://uploaded.net/file/2ttsekg2/v10024.hex
http://www.mediafire.com/download/hb22xq5ow78f9kc/v10024.hex
Firmware 2.x.x.x ----- Zeroner Version 3.x
Firmware Version 2.x.x.x: screen horizontal and vertical, 23 new sports to choice, notifications Ok, no camera and find phone function, don´t lost step when power down, many more battery life. New: Find phone work whit version 2.0.1.0
Update. Zeroner 3.1 Play store, camera function work, find phone don´t work.
Last Firmware v2.0.1.8:
v2.0.1.8 from 1.1.x.x:
http://uploaded.net/file/s3iw0wzf/2018-11xx.hex
http://www.mediafire.com/download/yg2bpmd7m0mcv8h/2018-11xx.hex
v2.0.1.8 from 1.0.x.x:
http://uploaded.net/file/3bhblvsp/2018-10xx.hex
http://www.mediafire.com/download/rksli93db9b72lx/2018-10xx.hex
Unfortunately, Zeroner version 3.x.x full, only official in chinese language or a lite version in Play Store.
Zeroner V.3.2.1 Play Store: https://play.google.com/store/apps/details?id=com.healthy.abroad
Zeroner V.3.6.6.7 chinese official: http://android.myapp.com/myapp/detail.htm?apkName=com.kunekt.healthy
I have made some changes in Chinese applications to work in another language.
Zeroner 3.3.4 English & Spanish, It works with the phone in any language.
http://uploaded.net/file/1y5dl5ui/Zeroner3_3_4_en_es_v2.apk
https://userscloud.com/7zeqecc0w9z4/Zeroner3_3_4_en_es_v2.apk
http://www.mediafire.com/download/4v2v92835i0avf3/Zeroner3_3_4_en_es_v2.apk
MOD:
-Add English and spanish laguages
-Add missing strings and traslate chinese strings in xml files.
-Changed chinese to english in notification bar.
-Chinese characters changed when an SMS or call is received.
-Changed many chinese messages to english. Include Low Battery.
-Changed chinese in date/time.
-Implemented in the code the solution provided by Vardas to resolved loalization problem.
Thanks to User Vardas from 4pda.ru.
Any Chinese message showing by unmodified app code.
I used google translator.
Iwown say: not recommended use RedMi、Meizu 、ZTE、Sony、Lenovo to upgrade firmware
When update/downgrade keep phone screen on, don´t allow the phone to sleep, do not move the bracelet during the process, better leave i5 Plus on a table.
Know problems with DFU settings App nRF Master Control Panel:
- Setting Package Receipt Notification to OFF or less than ~400 will not work on some phones, f.e. Nexus 4, Nexus 7. On Nexus 5 it increases upload speed to 4.3 sec/18kb.
If your phone only recognizes the bracelet as i5+-DFU3 after a failure update,read the second post and perform from step 11.
If your bracelet no power on, vibre and blind light, you can try:
http://forum.xda-developers.com/showpost.php?p=63870796&postcount=434
thanks: @oldslowdiver
You can read http://forum.xda-developers.com/general/accessories/i5-plus-smart-watch-wristband-unboxing-t3137338 for more information.
Or in Spanish: http://www.htcmania.com/showthread.php?t=1085110
Links:
Zeroner MOD:
Zeroner v3.2.8:
http://uploaded.net/file/kqkvvqf4/zeroner3.2.8translate.apk
https://userscloud.com/sr7ul9nay326/zeroner3.2.8translate.apk
http://www.mediafire.com/download/9o12lxmpswz4s8q/zeroner331_us_es.apk
Zeroner v3.3.1 English:
http://uploaded.net/file/u0ap161q/zeroner3_3_1_us.apk
https://userscloud.com/xafwal7bbglu/zeroner3_3_1_us.apk
http://www.mediafire.com/download/d1nzycszmx2p8rh/zeroner3_3_1_us.apk
Zeroner v3.3.1 English & Spanish:
http://uploaded.net/file/zwz4oijm/zeroner331_us_es.apk
https://userscloud.com/jx4kpulzrnnb/zeroner331_us_es.apk
http://www.mediafire.com/download/9o12lxmpswz4s8q/zeroner331_us_es.apk
Zeroner v3.3.2 English & Spanish:
http://uploaded.net/file/smmbx8p1/zeroner3.3.2_us_es.apk
https://userscloud.com/ag4m3i79e1yl/zeroner3.3.2_us_es.apk
http://www.mediafire.com/download/zfmw185ocilz4ma/zeroner3.3.2_us_es.apk
Zeroner v3.3.3 English & Spanish (Notification Bar English):
http://uploaded.net/file/r54a1czy/zeroner3_3_3_us_es.apk
https://userscloud.com/bglpmotlfl03/zeroner3_3_3_us_es.apk
http://www.mediafire.com/download/4747al20v04e4v0/zeroner3_3_3_us_es.apk
Zeroner 3.3.4 English & Spanish Only US location:
http://uploaded.net/file/crmbsc26/zeroner3_3_4_us_es.apk
https://userscloud.com/6ndp3tbpgdaj/zeroner3_3_4_us_es.apk
http://www.mediafire.com/download/tuuh99ung9nw1ri/zeroner3_3_4_us_es.apk
Decimal separator problem, only work fine whit phone setting in english (USA and UK) and spanish (USA).
You can launch app in different language whit this Xposed module: App Settings v1.10
http://forum.xda-developers.com/xpos...05-14-t2437377
Update downgrade. See second post.
Zeroner Update MOD DFU Mode:
http://uploaded.net/file/l5qi74uj/DFU Mode I5 Plus.apk
http://www.mediafire.com/download/5hvcfa667obdpx9/DFU_Mode_I5_Plus.apk
nRF Master Control:
https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp
Pack App DFU Mode + all firmware:
http://uploaded.net/file/vsw37343/DFU Mode + all firmware.zip
Firmware:
v2.0.1.8 from 1.1.x.x:
http://uploaded.net/file/s3iw0wzf/2018-11xx.hex
http://www.mediafire.com/download/yg2bpmd7m0mcv8h/2018-11xx.hex
v2.0.1.8 from 1.0.x.x:
http://uploaded.net/file/3bhblvsp/2018-10xx.hex
http://www.mediafire.com/download/rksli93db9b72lx/2018-10xx.hex
v2.0.1.6 from 1.1.x.x:
http://www.mediafire.com/download/423g98gmwvc8ccd/2016-11xx.hex
http://uploaded.net/file/mq1cn5rz/2016-11xx.hex
v2.0.1.6 from 1.0.x.x:
http://www.mediafire.com/download/vbx7uhabc1d4kxx/2016-10xx.hex
http://uploaded.net/file/gka1nz3i/2016-10xx.hex
2.0.1.1 fron 1.1.0.x:
http://www.mediafire.com/download/yu5vi3h98mofxjh/2011-11xx.hex
http://uploaded.net/file/pk9sm1v3/2011-11xx.hex
2.0.1.1 from 1.0.0.x:
http://www.mediafire.com/download/p2erxfmrxb9ioke/2011-10xx.hex
http://uploaded.net/file/ksicbc5e/2011-10xx.hex
v2.0.0.10 from 1.1.x.x :
http://uploaded.net/file/g8k0mp69/2010-11xx.hex
http://www.mediafire.com/download/xd0zy10ut99sk31/2010-11xx.hex
v2.0.0.10 from 1.0.x.x :
http://uploaded.net/file/n1r4gbcz/2010-10xx.hex
http://www.mediafire.com/download/fcspgo3h2xqb723/2010-10xx.hex
v2.0.0.9 from 1.1.x.x :
http://uploaded.net/file/65vdhes7/2009-11xx.hex
http://www.mediafire.com/download/q44tdx1qnfevavb/2009-11xx.hex
v2.0.0.9 from 1.0.x.x :
http://uploaded.net/file/tdpy321a/2009-10xx.hex
http://www.mediafire.com/download/fcspgo3h2xqb723/2010-10xx.hex
v2.0.0.7 from 1.1.x.x :
http://uploaded.net/file/xctq1qux/2007-11xx.hex
http://www.mediafire.com/download/f920edit9a3foaj/2007-11xx.hex
v2.0.0.7 from 1.0.x.x :
http://uploaded.net/file/l9psirbh/2007-10xx.hex
http://www.mediafire.com/download/q58gzac7kflg3g9/2007-10xx.hex
v1.0.0.23:
http://uploaded.net/file/sbtct6xe/v10023.hex
http://www.mediafire.com/download/7moi94293wb5wb1/v10023.hex
v1.0.0.24:
http://uploaded.net/file/2ttsekg2/v10024.hex
http://www.mediafire.com/download/hb22xq5ow78f9kc/v10024.hex
v1.1.0.7:
http://uploaded.net/file/hr4uxvzw/v1107.hex
http://www.mediafire.com/download/47665499syq6olu/v1107.hex
v1.1.08:
http://uploaded.net/file/gjsdgdzt/v1108.hex
http://www.mediafire.com/download/a1rd7yodaq6eiu2/v1108.hex
Zeroner v3 chinese:
http://uploaded.net/file/tgwlp3ju/com.kunekt.healthy_3.3.2_98.apk
http://uploaded.net/file/ce8o5wof/com.kunekt.healthy_3.0_5.apk
http://uploaded.net/file/d54m2eun/com.kunekt.healthy_3.3.1_97.apk
http://uploaded.net/file/s8gkg11k/com.kunekt.healthy_3.3.3_99.apk
http://uploaded.net/file/lknmnqka/com.kunekt.healthy_3.2_80.apk
http://uploaded.net/file/6vqwuxtx/com.kunekt.healthy_3.1_6.apk
P.D: Sorry for my English.
I make a MOD of Zeroner IOS Update for managed DFU mode in I5 Plus any firmware.
You can upgrade/downgrade I5 Plus, choosing the firmware to load.
Recommended read the first post.
Remember: Choose the correct firmware for your model.
Iwown say: not recommended use RedMi、Meizu 、ZTE、Sony、Lenovo to upgrade firmware
When update/downgrade keep pnone screen on, don´t allow the phone to sleep.
Know problems with DFU settings App nRF Master Control Panel:
- Setting Package Receipt Notification to OFF or less than ~400 will not work on some phones, f.e. Nexus 4, Nexus 7. On Nexus 5 it increases upload speed to 4.3 sec/18kb.
Software:
App DFU Mode I5 Plus:
http://uploaded.net/file/l5qi74uj/DFU Mode I5 Plus.apk
http://www.mediafire.com/download/5hvcfa667obdpx9/DFU_Mode_I5_Plus.apk
nRF Master Control:
https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp
Pack App DFU Mode + all firmware:
http://uploaded.net/file/vsw37343/DFU Mode + all firmware.zip
Alone Firmware in first post.
Process
Bluetooth ON.
Open App Dfu Mode I5 Plus.
1- Push SCAN
2- Select Bracelet.
3- Wait.
4- Push "Enter to DFU Process.
5- Minimize app.
6- Warning , sure no .hex file in Zeroner Folder, if exist delete.
7. Maximize app.
8- Push Circle "Push For DFU Mode"
9- Wait.
Bracelet power on light and screen off.
10- Close app.
11- Open app nRF Master Control.
12- Push Connect i5+-DFU3
13- Push DFU
14- Warning Select "Aplicattion"
15- Select .hex file firmware.
16- Push "NO"
Starting uploading firmware.
I5 Plus Restart with new firmware.
Reserved.
Great Work
Thank you so much for the dfu app & the collection of firmawares & special thanks for the translated apps !
trying the downgrade method & i'll brb to report
keep up the good work :good:
Edit: Downgraded to 1.1.08 & upgraded to 2.0.1.0 again through zeroner 3.3.4. Everything went smoothly (the only thing that scared me was the speed of uploading the .hex using nRF Master Control. It was so slow it took 8min)
Hard DFU Mode.
To put the bracelet in DFU mode.
Install nRF Master Control Panel: https://play.google.com/store/apps/...mi.android.mcp&rdid=no.nordicsemi.android.mcp
First.
Usb connect to pc o usb power adapter
Battery positve disconnect. You can use a switch.
Steps:
1. Open nRF Master control Panel, in android phone, push scan.
2. Put point 2 "RED" to battery positive, use point in capacitor, it is easier. Use a wire
3. nRF Mster Control detect dfu device, Hold connection in point 2 "RED".
4. Connect positive battery.
5. you can realase connection in point 2 "RED".
Now I5 plus is DFU mode and you can upload any firmware whit nRF Mater Control Panel.
Hi, is there the possibility of a smart wakeup like the Xiaomi Mi Band?
rizzotti91 said:
Hi, is there the possibility of a smart wakeup like the Xiaomi Mi Band?
Click to expand...
Click to collapse
No.
Thank you for all your work! It is pretty amazing.
The download 3.3.4 gives an error message when I try to install. 'Can not parse'
Perhaps it is faulty?
Hi,
gerry11 said:
Thank you for all your work! It is pretty amazing.
The download 3.3.4 gives an error message when I try to install. 'Can not parse'
Perhaps it is faulty?
Click to expand...
Click to collapse
uploaded.net doesn't work from mobile. You need a PC to download.
very thanks @roninzgz, great job
ftomek said:
Hi,
uploaded.net doesn't work from mobile. You need a PC to download.
Click to expand...
Click to collapse
Downloading was not the problem . When installing the apk it gives an error message on my phone.
I never had this issue before with the translated apk's of roninzgz.
Lovetz said:
No.
Click to expand...
Click to collapse
It's a software missing or a hardware missing?
---------- Post added at 12:18 PM ---------- Previous post was at 12:07 PM ----------
gerry11 said:
Downloading was not the problem . When installing the apk it gives an error message on my phone.
I never had this issue before with the translated apk's of roninzgz.
Click to expand...
Click to collapse
The last apk is perfectly working on my Note 4
gerry11 said:
Thank you for all your work! It is pretty amazing.
The download 3.3.4 gives an error message when I try to install. 'Can not parse'
Perhaps it is faulty?
Click to expand...
Click to collapse
Unistall preview zeroner version.
Download again.
if no work.
Try to install Zeroner 3.3.4 chinese.
Tell me if chinese works to check my version.
gerry11 said:
Downloading was not the problem . When installing the apk it gives an error message on my phone.
I never had this issue before with the translated apk's of roninzgz.
Click to expand...
Click to collapse
Yeah, because it doesn't download correctly. Only a few bytes. Same here.
Best regards
roninzgz said:
Unistall preview zeroner version.
Download again.
if no work.
Try to install Zeroner 3.3.4 chinese.
Tell me if chinese works to check my version.
Click to expand...
Click to collapse
Yes, now it worked. Thank you very much.
Thanks, very nice work! I am currently translating the app into german and it is hard work I will share my work, when I am done.
Hi.
Someone knows how to activate on the miui`s firmware function Unlock with Bluetooth devise?
Smart unlock with I5 Plus
rizzotti91 said:
Hi, is there the possibility of a smart wakeup like the Xiaomi Mi Band?
Click to expand...
Click to collapse
Lovetz said:
No.
Click to expand...
Click to collapse
Actually, I found a way to do it (and I am using a bloody Xiaomi Redmi Note 2 Prime).
I have Lollipop 5.0.2 on (Miui Dev 5.11.26 EU), but I guess you can adjust these steps, in according to your ROM.
First:
you have to find the Bluetooth address of your wristband.
In my case (RN2 Prime) Go to > Settings > Privacy > Unlock by Bluetooth device > You'll see the I5 Plus, not with its name (Braceli5-1060, in my case), but with its address (i.e. C4:B4:E1:22:2B:21).
Take note of this address.
Second:
Download this app (or any other apk doing Bluetooth pairing): Bluetooth Pair (https://play.google.com/store/apps/details?id=com.waylonhuang.bluetoothpair) - it's free, no ads (I mean, I have AdAway.. so...).
Open Bluetooth Pair and
go to > Settings > Settings: Recently Connected > Type here the Bluetooth Address you noted before.
Go back to Bluetooth Pair main window: now you'll see there is your I5 Plus listed, so, tap on 'Connect'.
Now you can also uninstall Bluetooth Pair.
Third:
Go to > Phone Settings > Privacy (or security) > Smart Lock > Trusted Devices > Add one > Now, our friend I5 Plus is finally listed, and you can VIP-list it for Smart Bluetooth Unlock.
Hell yeah.
PS. If you use Macrodroid or Automate, or Tasker, once you have the bluetooth address of your I5 Plus, you can easily make a macro for it.
PS2. @roninzgz you my hero! Thanks for this thread and all your work
Hello, I have 2.00.9. Zeroner 3.3.4 finds a new firwmare version but it remains on "Cheking version" for hours and nothing happens. What should I do to upgrade?
giardux91 said:
Hello, I have 2.00.9. Zeroner 3.3.4 finds a new firwmare version but it remains on "Cheking version" for hours and nothing happens. What should I do to upgrade?
Click to expand...
Click to collapse
Bracelet lost connection to phone during process. **** happens, just don't wait hours, if it is stucked for half a minute, go back and try again, and again.
I thought i would start this thread, separate to the Jeep one as the Jeep thread is for the 8.4" uConnect and uses some different files to the 6.5" version.
The aim of the thread is to be able to gain some sort of 'root' access to the file system to be able to update the maps on the system. So far I know cm0002 and Leighm0 have done some great work with the 8.4" - Most of which we can use on the 6.5".....once we have access to the file system.
The problem we seem to be facing is finding a swdl.iso that is old enough to be modified for our 6.5" units.
Mission Accomplished.... mostly
Disclaimer: I can not be held responsible for any damages to your uConnect, Car or your hair falling out from running this modification.
That being said, if you do have a problem please contact me and I will see if I can help you fix it.
For all those people still on v17.07.46 or older uConnect 6.5 firmware I offer you a “jailbreak”, you can now update your maps to the latest versions (currently offering EU 2018Q3 / NA 2018Q1 in my pack). I have to warn you though, the process can take a lot of time!
For those of you who have updated your 6.5 uConnect to v17.35.41 or v18, I am still working on how to update those, FCA / Alfa changed the locks with that update!
For a Full EU / NA update, if you follow my instructions fully, it will take approx. 4hours during which time your uConnect must remain powered on. This time can be greatly reduced by only updating the country or countries you need, or if you are feeling brave, skipping Step 1.
Files / Items needed:
uConnect 6.5 running v17 or older firmware -Supporting Alfa, Fiat and Jeeps too!
At least 8gb USB Drive ***preferably with a flashing led light so you can see file access***
Files from
https://mega.nz/#F!kURhTCbJ!uJhKPMyGiESbvQSDb33CvQ
Stage 1 – Backup your files
Download:
1 Magic -Alfa pre UPD.zip -For Alfa
1 Magic -Fiat & Jeep pre UPD.zip -For Fiat / Jeep
2 Backup.zip
Process:
1. Download and expand “1 Magic -XXX.zip” and “2 Backup.zip”
2. Copy the content onto the root of the USB drive
3. Start car and let uConnect boot up (wait approx 5min for full boot up)
4. Plug in and WAIT, the uConnect will not appear to be doing anything but if you are using a USB with a light you should be able to see it flashing with file activity
5. After some time, in my case it took 1h25 to complete this stage, it should popup a window about there is a update that you MUST answer NO to
6. Pull USB, and power cycle the uConnect*
After that you now have a backup of all the system and map files we are going to change on your uConnect.
KEEP THEM SAFE!
Either use a second USB for stage 2, save the backup folder to your computer or if your like me and use a 16gb USB stick you can leave it where it is.
I have now uploaded copies of the official EU Map Packs from (A) 2013, 2015 and 2017, NA Map Packs (B) 2013, and ROW Map Packs (C) WIP that will function as a backup or official upgrade for anybody needing them, restoring your uConnect back to stock.
***If you have a newer set of Original Map files please contact me, and I can add them to the drive for all to benefit from***
Stage 2 – Modify your uConnect
Download:
1 Magic.zip --You should already have this if you completed Stage 1
D EU Custom 2018 HNEU2018Q3v2.zip --Full EU
E NA Custom 2018 HNNA2018Q1.zip --Full North America
Or
D UK Custom 2018 HNUK2018Q3.zip --UK Only
D FR Custom 2018 HNFR2018Q3.zip --France Only
D DE Custom 2018 HNDE2018Q3.zip --Germany Only
D IT Custom 2018 HNIT2018Q3.zip --Italy Only
***There will be other country / State only update packs soon***
Or
A EU 2013 Original NQEU2012Q4.zip --Stock 2013 Maps, Original EU Release
A EU Update 2017 HMEU2015Q4.zip --Newest Original Map files released 2017
B NA 2013 Original NQNA2013Q4.zip --Stock 2013 Maps, Original NA Release
Process:
1. Download and expand “1 Magic.zip” and “D XX Custom 2018 HN….zip”
2. Copy the content onto the root of the USB drive
3. Start car and let uConnect boot up (wait approx. 5min for full boot up)
4. Plug in and WAIT, the uConnect will not appear to be doing anything but if you are using a USB with a light you should be able to see it flashing with file activity
5. After some time, depending on file used - If country / State only pack approx. 15min if full EU then approx. 2h, it should popup a window about there is a update that you MUST answer NO
6. Pull USB, and power cycle the uConnect*
If all gone well you will now have a uConnect 6.5 with updated maps!
As I am sure you can understand, there are still some little bugs to work out;
Problems:
UK postcodes > Only 5 digit search
Speedcams > Not working at all
Anything else… you tell me
Fixed:
UK TMC now working
France TMC working again
Italy TMC (paid version) working
There may be other little problems, but I am unable to test them, please let me know and I will look into them and try to fix!
*To Power cycle:
Either remove key, lock car, wait 10min, unlock and restart)
Or use engineers menu to reset the uConnect (Press Radio, More and Browse until menu pops up, scroll down to Reset Radio, answer YES)
I have uploaded some of the files, more to come.
The URL:
https://mega.nz/#F!kMYjlSKB!MCC6U1jclb0_aHc-NdocrA
If you have anything else to share please message me.
So I have found a uConnect 6.5 update file with version no 15.18.xx. Uploaded to the mega share - now to figure out how to modify it!
Jeep Renegade
Hi.
It is possible in jeep?
SquithyX said:
So I have found a uConnect 6.5 update file with version no 15.18.xx. Uploaded to the mega share - now to figure out how to modify it!
Click to expand...
Click to collapse
any news?
Update....
The 15.18.xx file is ROW and after modifying it to work for any model, I get a authentication error on inserting the USB!!!!
Hi SquithyX,
Any chance to get the link for "Updated EU Maps (2018q1) formatted for the 6.5"??
Many Thanks in advance!
Hi,
I have a working Alfa 6.5" headunit with 14.X.X sw still installed on it. Does anyone know if it is possible to extract fw directly through JTAG? What kind of harware is needed to do such operation?
Icaro03 said:
Hi SquithyX,
Any chance to get the link for "Updated EU Maps (2018q1) formatted for the 6.5"??
Many Thanks in advance!
Click to expand...
Click to collapse
I can upload for you if you want, however until I hack has been found to be able to modify the system, they will not work!
Sent from my CLT-L09 using Tapatalk
andri98 said:
Hi,
I have a working Alfa 6.5" headunit with 14.X.X sw still installed on it. Does anyone know if it is possible to extract fw directly through JTAG? What kind of harware is needed to do such operation?
Click to expand...
Click to collapse
Not sure on JTAG, but if it is a early uConnect (Alfa 940 unit with More button) then the NAND chip is on a separate daughter board, that can be removed from the system. If a interface could be made for that then full disk access could be got.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my CLT-L09 using Tapatalk
it would be great to see some development on this system
SquithyX said:
Not sure on JTAG, but if it is a early uConnect (Alfa 940 unit with More button) then the NAND chip is on a separate daughter board, that can be removed from the system. If a interface could be made for that then full disk access could be got. View attachment 4611300
Click to expand...
Click to collapse
I found a datasheet searching JY455
It seems to be an eMMC Memory from Micron (MTFC??GLGDM) with a build in MMC-Interface
Maybe it works like an MMC-Card.
If someone build an adapter for the white connector and USB, maybe we can read and write the flash like an MMC-Card on an USB reader.
for you may this works for really? have a look for "Alfa Romeo Giulietta UConnect Apple CarPlay & Android Auto retrofit Kit" in a search engine. it's very expensive but they say you can use touch screen as well to interaction when usually all the video interface i have found say not possbile, only video signal. what do you think about this?
So close, but broken lol
Success......kind of, I have managed to modify a swdl.iso to enable loading of different / modified files, on my Alfa 6.5 uConnect running 17.07.55.
The problem now is I seem to have completely broken navigation!!!!!!
I used the idea from post #216 in the Rooted Jeep Cherokee thread and modified the manifest.lua file in the swdl.iso (17.07.55) to load a script from usb before running the update.
Process goes power on uConnect > wait for it to boot up and display "Hands free ...." > insert USB and wait...it seems like its not doing anything but the script is running in the background > after some time the do you want to update question and answer No.
The fact that is has asked if you want to update is confirmation that the script has finished, however unfortunately there is no indication that the script is being run or how long it will take unless you have a usb with a flashing light, then it will show you something is happening at least! **my usb does not have a flashing light
I tested it with a splash screen update.... that worked perfectly, so no more boring Alfa Romeo logo on silver background for me at start up, I then pushed the modified NaviServer2, nav.sh and navRestart.sh files and rebooted.... new splash screen working perfectly but on pressing Nav button I just end up on a screen saying "Activating Navigation"
I am in the process of uploading the modified files to the mega share if anybody whats to have a look or are feeling brave
Navigation now fixed! working on making a 2018q2 map pack for it now.
SquithyX said:
Navigation now fixed! working on making a 2018q2 map pack for it now.
Click to expand...
Click to collapse
Really????' you are the MAN! could you please share everything you have used and step by step? do you think even with firmware 18 installed is possible updating maps?
thanks
Ok, here is a test image (working with v17 and earlier.... unknown for v18).
https://mega.nz/#!IUZDQATI!o1OBd8qbA...mQ5lunDb0opDvs
For anybody wanting to try it, and let me know the outcome.
The script I have included will:
Backup your MAPS license files to the USB
Backup your original Alfa Splash Screen to the USB
Copy a dbver file to the USB, that should contain information about your version of MAPS installed
Push the modified Splash screen and set its properties on the uConnect
Steps:
1. Download and expand
2. Copy onto USB drive (at least 4gb) ***preferably with a flashing led light so you can see file access***
3. Start car and let uConnect boot up (wait approx 5min for full boot up)
4. Plug in and hope
5. After some time it should popup a window about there is a update (with v17) that you answer NO to. With v18 i dont know what it will do, it may popup a window saying newer version installed, Error or maybe not do anything at all.
If that is the case use the led on the usb to make sure no file access is going on and then maybe wait 5 min extra, just to make sure.
6. Pull usb, and power cycle the uConnect - either power off the car (lock car, wait 5min, unlock and restart) or use engineers menu to reset the uConnect
7. Watch it boot....the boot image will be different if success!!!!! (there will also be some new files on the usb)
It is very important NOT to let it run the update, if it offers
I am in the process of uploading my work to my mega share,
I am currently running 2018Q3 UK maps in my Alfa with WORKING tmc. Still trying to sort the speedcams and full postcode search though - they dont work....yet!
SquithyX said:
I am in the process of uploading my work to my mega share,
I am currently running 2018Q3 UK maps in my Alfa with WORKING tmc. Still trying to sort the speedcams and full postcode search though - they dont work....yet!
Click to expand...
Click to collapse
did you modify the swdl.iso? or just the script.lua?
sofro1988 said:
did you modify the swdl.iso? or just the script.lua?
Click to expand...
Click to collapse
I have used a modified 17.07.55 swdl.iso with a script.lua - if you download the test above it contains some of the modified files. The rest are currently being uploaded / are already available online.
I have done a very quick video of progress with the uConnect here:
https://youtu.be/ed0O-xXNHdg
I would try to find the video that showed me, but after realizing it took me 3 weeks to find it and I really hate techno now...lol ill spare you the experience!!
***DISCLAIMER***
I did not create this tool and no its not a virus... please read the entire post before you do anything.....
This tool is for when you lock your self out of your own account and don't have the password, or the phone you used to two party authorization is not in service, you changed your number, your girlfriend threw it away, damn it my screen broke, you forget stuff easily, or maybe you didn't know that you bought a used phone that was locked and now your just stuck... Or you might be one of the few and proud local phone repair guys.....
IF YOU LIVE A LIFE OF CRIME AND YOU STOLE A PHONE OR ARE A PART OF A CRIMINAL ORGANIZATION RESELLING ON THE BLACK MARKET YOU ARE THE WORST OF THE WORST PEOPLE ON THE PLANET AND YOU DONT DESERVE THE AIR YOU BREATH.... DO NOT ASK QUESTIONS PERTAINING TO ILLIGAL ACTIVITY BECAUSE YOU WILL BE REPORTED......
PLEASE READ THE ENTIRE POST BEFORE YOU DO ANYTHING
You will need another Android at the end of the process with Android 10, OTG capability or a newer Samsung, S9 or better .. I successfully did this with a Motorola g7 plus as my 2nd phone...
This is a Windows 10 PC method..... if you don't have it get it
Create a new Samsung account on the website and setup two party verification
Download WinRAR https://www.win-rar.com/download.html?&L=0
I would try to find the video but after realizing it took me 3 weeks to find it and now I hate techno music!!
FRP tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mod edit: DL link removed due to virus detection.
Disable Anti- Virus on Windows or you will scratch your head wondering where the download went......
Make sure you use WinRAR ONLY not 7zip gunzip anyzip because I dont know why but this is the only way to unzip and to execute the script
Make sure you got up to date samsung drivers and up to date adb blah blah installed
As far as I know this will work on ANDROID 11 ONLY!!!! I Began with ANDROID Q frp locked with out success, so I upgrade firmware from samfw.com
This should work with ANY varient of the QUALCOM snapdragon S20 FE
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U Free Download
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
I was on Android 10 so I factory data reset from stock recovery and flashed Android 11 with Patched ODIN
Odin 3.14.1 Patched (Modded) for windows - Odin download for pcShare Odin3 Flash Tool: 0 Shares Facebook Twitter LinkedIn Copy Link More Now added Odin 3.14.1 Patched version for windows. It specially developed Samsung’s newer phone firmware flash with android 10. We assume this will be very useful, so we thought we would share it. Odin3 version 3.14.1 has...
Once flashed boot the phone and connect to WIFI the same WIFI the Windows PC is on
Unzip and Install the FRP tool with WinRAR ONLY
Disable the native Windows 10 antivirus (MAKE ALL GREEN CHECKS DISSAPPER)
Disable signatures verification from the FRP tool... it will ask you to reboot before running the tool.... DONT REBOOT YET
check anti virus again make sure its disabled
NEXT choose either of these methods to make sure signature verification is turned off...also has procedure to turn it back on when done
How to Disable Driver Signature Verification on 64-Bit Windows 8 or 10 (So That You Can Install Unsigned Drivers)64-bit versions of Windows 10 and 8 include a “driver signature enforcement” feature. They’ll only load drivers that have been signed by Microsoft. To install less-than-official drivers, old unsigned drivers, or drivers you’re developing yourself, you’ll need to disable driver signature enforcement.
www.howtogeek.com
NOW REBOOT
It should have test mode listed on your desktop in the bottom right corner
GO to the windows security badge in task view area and check your antivirus status....there will be one its the main one turn it off
make sure phone is CHARGED FULLY powered ON, and connected to the same WIFI as the PC.... when u disabled signature it reset the Samsung drivers....
Connect to the PC with the best USB TYPE C cord you can...let windows set the phone up for file sharing (it prompt you just click on file transfer)... when it makes the windows connect noise and tells you setup is finished click the install button on the FRP tool....make sure you keep the phone screen unlocked and lit up... You will get a prompt on the phone click it to open up the youtube... click the account picture scroll to the bottom and there should be a link for PRIVACY POLICY click the link it will take you to the Real google search......ENTER THIS EXACTLY IN SEARCH BAR addrom click the first link it should say FRP tool 2021 or something similar
open galaxy store from the menu.....update the app if needed when its finished updating back out with back nav bar button...re-enter and search for Smartswitch install back out then open the settings app from same menu as before ... navigate to accounts and make sure there is nothing active.. if there is delete it... use the settings search bar and access Smartswitch.....
TIME FOR SECOND PHONE
on the other Android have smart switch from the playstore already installed and make sure the phone has only 1 GOOGLE account. It must be your Account that will be installed on the S20 FE... Make sure you are synced make sure its a clean reset phone no EdXposed, Magisk, or TWRP installed because its critical for the Smartswitch process...
LOG BOTH PHONES INTO SMARTSWITCH
The 2nd phone is the host and the receiver is the S20 FE
Send ONLY your GOGGLE Account AND DEVICE SETTINGS!!!! nothing more, thats all... I had no luck with OTG cable it didn't work trust me when I tell you choose the wireless method 1000% success.... once its done go to developer options and toggle usb debugging set a device pin or pattern make sure you install your Samsung account and Google account.... restore a back up from either cloud...IMPORTANT....
after the backup restores let the phone sit for about 5 seconds...lol.... factory reset from the settings menu.....when it boots back up its gonna be FRP locked AGAIN with your passcode....cheers...
And this worked on your device? I am a little bit sceptical about disabling antivirus. Suspicious
Maybe better to hide this guide, as it can be misused by thefts.
It_ler said:
And this worked on your device? I am a little bit sceptical about disabling antivirus. Suspicious
Maybe better to hide this guide, as it can be misused by thefts.
Click to expand...
Click to collapse
wouldn't they just reset the device rather than wanting to get into it as is ?
this is probably more use to the psycho girlfriend who wants to know who Janis is.
should this work with canadian model SM-G781W ?
3mel said:
wouldn't they just reset the device rather than wanting to get into it as is ?
this is probably more use to the psycho girlfriend who wants to know who Janis is.
Click to expand...
Click to collapse
FRP means Factory Reset Protection. You can probably guess what this guide is bypassing.
Ok, so you want people to download some random file, which VirusTotal shows like a billion different antivirus apps as infected?
Then you want people to disable their Windows antivirus AND driver signature verification?
And then you want people to use winrar(known to have security problems with scripts) to open a .7z file instead of 7zip, app which created that archive in the first place?
And then your instructions tell people to open youtube? right...
If anybody reading this thinks this works, please private message me because I have an amazing business proposition for a bridge for you!
Thread closed due to VirusTotal detection.