Hi Guys ,
i would like to share my CM12.1 based kernel with very few features and i hope u like it
Code:
Features
CPU overclock 2.457 Ghz (Phone will boot @ 2.457Ghz)
Voltage adjustment
KCAL advance color control
Fast_hotplug
Faux Sound control
Compile with UBERTC GCC 4.9.3 ([url]https://plus.google.com/+ChetKener/posts/YzMJEkzPQgp[/url])
Graphite and Ofast flags
Cortex A15 optimized
selinux permissive
Thats it!! :p
Q&A
Q- Why overclock ?
A - Why not? .. Krait 400 is capable to run at 2.457 Ghz .. acording to me going over 2.457Ghz is overclock ...
Q- Why fast_hotplug and not intelli-plug ? and where can i find fast_hotplug settings ?
A- Well .. ill see if i can include intelli-plug also .. but you can use fast_hotplug for now as it is really fast compare to mp_decesion . i dont noe about any apps but u can control it manually using Root explorer (recommended) go to > sys > module > fast_hotplug (and do whateve u want
Q- how can i boot my phone on defualt freq instead of 2.457Ghz
A- you cant , beacuse i removed 2.105Ghz and replaced it with 2.265Ghz .. so if u want u can boot at 2.265Ghz using Kernel adiutor app (Recommended) and also dont forget to change thermalmanger.xml (found in system/etc ) values (find "control name = cpu" and change first value from 2105400 to 2265600)
Q- Your kernel is draining battery like hell !!! help me
A- i dont care ... unless i found unusual battery drain..
Q- Wow what a waste kernel no governer no i/o sched... other kernels has 10000 governers ... dafuq are u doing OP ?
A- Lol .. there is no need to add many gov and i/o schd as Interactive is best governer and u can tweak it for performance , battery and balaced (search on Xda) and ..
i want to keep my source clean and close to CM12.1 so that i can easily track if there is any issues .. and let me clear one more thing , m not a kernel developer i have 0% knowledge in C+ , 0% knowledge in linux/ubuntu and also very less knowledge related to github so i decided to pick most usefull features (for me atleast ) ..
Q- Can add "abc" or "xyz' features in your kernel ?
A- Well .. because of less knowledge i decided to pick limited features and not to mess with my source ..... but if feature is very usefull then ill surely look in to it and add it (if possible)
Click to expand...
Click to collapse
Here are some sceenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Kernel :
V1 (16-05-2015)
View attachment 3315931
V2 (23-05-2015)
View attachment 3326746
EDIT - forgot to add source
https://github.com/Naitik2015/android_kernel_sony_msm8974
EDIT - forgot to add credit
Special Thanks to below mention ppls (without them it wouldnt possible)
Faux123
DooMLoRD
pec0ra
Myself5
AndroPlus
savoca
Cyanogenmod maintainers
UBERTC Developers
Code:
CHANGELOG
V1
CPU overclock 2.457 Ghz (Phone will boot @ 2.457Ghz)
Voltage adjustment
KCAL advance color control
Fast_hotplug
Faux Sound control
Compile with Linaro GCC 4.9.3
V2
Compile with UBERTC GCC 4.9.3 ([url]https://plus.google.com/+ChetKener/posts/YzMJEkzPQgp[/url])
Graphite and Ofast flags
Cortex A15 optimized
selinux permissive
INSTALL INSTRUCTION
1. Save kernel.zip on your SD card
2. Boot in to recovery
3. Wipe cache and Wipe Dalvik/ART cache.
4. Flash kernel.zip
My Settings -
CPU MIN - 300 Mhz
CPU Max- 2.457 Ghz (2.265 for battery)
Governor - Interactive
I/O sched - RAW
Gov Setting -
go high speed - 80 (90 for battery)
highspeed freq - 2.457 ghz (2.265 for battery)
Timer rate - 20000 (40000 or 30000 for battery)
Sound control
headphone gain (both) - 4
and use Viper4android with megabass IRS (Z-edition)
Hotplug
Fast_hotplug - enable it using Root Explorer
first disable mp_decesion
go to sys > module > fast_hotplug > parameters > open fast_hotplug_enabled in text editor and change value to 1 from 0
KCAL settings -
R- 255
G- 250
B- 245
Saturation - 60 (even 55 is ok )
Screen Value - 105
Screen Contrast - 120
Amazing Job!
I have yet to try this but it looks awesome, this is just the kernel a lot of people have been waiting for. Finally having all these features available in a stock build of cm is a huge step for lollipop, kudos.
My Color Control setup
Red-205
Green-200
Saturation-45
Value-115
Contrast-120
Everything else stays the way It came. I don't know if my cheapo screen guard has any negative influence on the view ability of my screen, but for me this setup provides a dim enough backlight for nighttime use, bright enough for direct sulight. While making colors pop on the screen without unrealistic saturation levels. The blacls also seem deeper and more inky. Just thought I'd share my setup
Great job dev looking forward to trying this out.
@Techpenguin5 Could you tell me what app you're using for colour control
GeoSpaceKing said:
@Techpenguin5 Could you tell me what app you're using for colour control
Click to expand...
Click to collapse
Kernel adiutor or http://forum.xda-developers.com/android/software-hacking/dev-kcal-advanced-color-control-t3032080 (app developed by savoca)
Restarting when changing GPU governor. Also, can you share with us your recommended settings?
Good Kernel
nArdow said:
Restarting when changing GPU governor. Also, can you share with us your recommended settings?
Good Kernel
Click to expand...
Click to collapse
only cpubw_hwmon and simple ondemand causes reboot ... may be bug in CM kernel as i don't touch anything related to GPU.... Settings added in 2nd post ...
Im so glad you people like my Kernel
Thanks
Very thank's for this kernel! <3
I have some questions:
-Installation is only flash .zip in recovery?
-If i install this kernel i lose my data, apps and other?
-It's work on CM12 (5.0.2) or CM12.1 only?
-Why i can OC to 2.457GHz, not to 2.8?
Rygiel98 said:
Very thank's for this kernel! <3
I have some questions:
If i install this kernel i lose my data, apps and other?
It's work on CM12 (5.0.2) or CM12.1 only?
Why i can OC to 2.457GHz, not to 2.8?
Click to expand...
Click to collapse
1. Yes , its flashable using recovery..
2. You wont lose your data unless you choose to wipe your data on recovery ( Install instruction added on 2nd post)
3. Why you are still using CM12 ... my kernel is based on CM12.1 source so technically it wont work on CM12
4. Check my source i had included overclock to 2.8 Ghz and tested on my phone for some days but i found that it isn't stable and ppl will damage there SOC using excessive OC .. the only use of 2.8 Ghz is improve your Benchmark scores ( that too in fridge ) .. so i removed it
Thank's for answers.
naitik2012 said:
3. Why you are still using CM12
Click to expand...
Click to collapse
I must use 5.0.2 because Xposed didn't work on 5.1.1. You don't use this?
Rygiel98 said:
Thank's for answers.
I must use 5.0.2 because Xposed didn't work on 5.1.1. You don't use this?
Click to expand...
Click to collapse
No i don't use Xposed framework .. have you tried this > http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
Can' t flash the Kernel..
I use TWRP on latest CM 12.1 nightly
Tried several times..
Any idea?
Sent by XDA Fax
Fast_hotplug - enable it using Root Explorer
first disable mp_decesion
go to sys > module > fast_hotplug > parameters > open fast_hotplug_enabled in text editor and change value to 1 from 0
I don't know it.. I want edit this file but i get error. :/
And next problem is in Antutu i have restart phone.. Why?
Duvel999 said:
Can' t flash the Kernel..
I use TWRP on latest CM 12.1 nightly
Tried several times..
Any idea?
Sent by XDA Fax
Click to expand...
Click to collapse
havn't tried on TWRP ... on CWM its working withour any issue.
Rygiel98 said:
Fast_hotplug - enable it using Root Explorer
first disable mp_decesion
go to sys > module > fast_hotplug > parameters > open fast_hotplug_enabled in text editor and change value to 1 from 0
I don't know it.. I want edit this file but i get error. :/
And next problem is in Antutu i have restart phone.. Why?
Click to expand...
Click to collapse
as i told always use Root explorer to edit system files ...
If Antutu restart at 31% or 35% means voltage issues ... incease voltage of 2.457 Ghz and 2.265 Ghz by 10 if still reboots then keep increasing +5 till you find stable voltage.......
That's strange, that CWM works & TWRP not?
Sent by XDA Fax
as i told always use Root explorer to edit system files ...
I use this file menager and error. :/
This kernel bootloops Euphoria 1.1 Rom.
Nothing else I can say...
What voltage i must set?
Tapped from Sony Xperia Z1. (CM12.1)
Rygiel98 said:
View attachment 3322382
What voltage i must set?
Tapped from Sony Xperia Z1. (CM12.1)
Click to expand...
Click to collapse
Depends on what PVS bin your phone has!
This is mine (PVS4)
Sent from my C6903 using XDA Free mobile app
What is PVS and how i can know what PVS i have?
Tapped from Sony Xperia Z1. (CM12.1)
Related
RAFPIGNA KERNEL
Click to expand...
Click to collapse
1,5Ghz OC, Undervolted, Extended Battery Support and much more
This is my personal kernel, compiled for myself and for my builds, but some one asked to share it so...
I'm not a kernel expert and probably I can't give a lot of support on this, so don't expect anything
I mainly did this to fit some my needs in my builds, so I cannot guarantee that will work fine with others and that I will be able to fix issues.
Credits for the kernel development goes to the people that constaly work on it: specially Markinus e Danijiel but of course also Rajko, Cotulla, huyanu and all the other people involved.
A big thanks also to: Hastarin for his help and clear instructions to start.., ocm7 for the "night lesson" that gave my first compiled kernel, darkstone, crawlingcity
Use this kernel at your risk.
Speed is 998 as default, so standard for your phone. If you want to overclock you have to use an OC app.
Anyway DO IT AT YOUR RISK. I will not be responsible for damages to your phone!
Main Features:
Based on master linux_on_wince_htc http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc and always keept updated to it
G-Sensor freeze patch and other small fixes
Patched with 1.5Ghz OC capability
Patched SMARTASS Governor to be more battery saver
Default speeds: 245 - 998 mhz
Default governor: interactive
Default undervolted to 925mV
SysFS interface to custom undervolt or overvolt (see post 2 for help), credit: -snq
Full cLK support, credit Cedesmith
Full support of two-way call recording, via external app (see here http://forum.xda-developers.com/showthread.php?t=993793 )
Patched for BT high-battery drain on GB builds (your rom must support it in init.rc! read here http://forum.xda-developers.com/showthread.php?t=1007774
Fully working HTC Headset support
Wi-Fi MAC address fix
Yaffs, Ext2, Ext3, Ext4, CIFS, UTF-8
RMNET as module
IEEE 802.1x/EAP authentication and Native Wifi-tethering (on GB/AOSP builds using the GB version)
Extended Battery Support (only original HTC EB 2300mAh) credits: Arne
My entire code, config, build script are stored on GIT. No unuseful diff files, no unuseful zips with configs.. just clone the git repo and you can see everything, launch the script and build your own clone.
For who cares, config and commits logs are also stored in the zip in the "devs" folder
Click to expand...
Click to collapse
Changelog:
My git repo: http://gitorious.org/~rafpigna/linux-on-wince-htc/rafpigna_linux_on_wince_htc
Code:
2.0 OC GB
Added two way call recording support (http://forum.xda-developers.com/showthread.php?t=993793)
Patched for high BT drain on GB builds (remember that to have this working, your rom must support it in init.rc! read here http://forum.xda-developers.com/showthread.php?t=1007774 )
Merged to master branch
2.0 OC
Added two way call recording support (http://forum.xda-developers.com/showthread.php?t=993793)
Patched for high BT drain on GB builds (remember that to have this working, your rom must support it in init.rc! read here http://forum.xda-developers.com/showthread.php?t=1007774 )
Merged to master branch
1.9 OC GB
[B]only for Gingerbread builds[/B]
Cleaned and tweaked Wifi drivers from tytung repo
Merged to master git
Added default UV to 925mv for more battery saving
Sysfs interface to custom control the UV parameters via shell or script
Added more cpu frequency steps, for improved smoothness and battery saving
Added Extended Battery support from Arne code. (HTC Original EB 2300mah)
Added multiport support
Added full cLK support including boot-to-recovery
Included again "01modules" in the zip file to avoid losing data.
1.9 OC
Merged to master git
Added default UV to 925mv
Sysfs interface to custom control the UV parameters via shell or script
Added more cpu frequency steps
Added Extended Battery support from Arne code. (HTC Original EB 2300mah)
Added multiport support
Added full cLK support including boot-to-recovery
Included again "01modules" in the zip file to avoid losing data.
1.8 OC NO SENSE
Merged with linux_on_wince_htc to apply last commits
http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc
[fixed netfilter errors and missing dependencies] Danijel
Added tytung AOSP wifi drivers and wpa_suplicant to enable IEEE 802.1x/EAP authentication and native wifi thetering on GB/NO SENSE builds
[B]Credit for this fix goes to TYTUNG[/B]
1.8 OC
Merged with linux_on_wince_htc to apply last commits
http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc
[fixed netfilter errors and missing dependencies] Danijel
1.7
(new temporary branch: NEWOC)
Added BFQ as default scheduler, TinyRCU, LZMA [from huanyu]
Tweaked Interactive governor [from huanyu]
Other small tweaks (see git)
1.6
Merged to master http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc
[g-sensor calibration fix (no more facedown needed)] - Markinus
1.5
Fixed 245000 min frequency typo
1.4
Added no-oc on boot to avoid rebooting issues
1.3
Fixed low cpu values that causes drop of phone signal.
1.2
Tweaked Smartass governor
Set INTERACTIVE as default governor
1.1
Some cleanups
1.0
Added OC + Smartass governor
Click to expand...
Click to collapse
Download:
AT THIS MOMENT THE DOWNLOADS ARE ONLY FOR MAGLDR ROMS. IF YOU NEED CLK PLEASE CLICK HERE FOR A GUIDE ON HOW TO CONVERT. THANKS ARIF-ALI!
USING OTHER METHODS CAN CAUSE NO BOOTING, NO DATA OR OTHER ISSUES
Flash via ClockWord Recovery
I will not provide other formats
If you have issues flashing or something not works after flashing, check with your build chef if this zip is compatible with the partitions used by your build.
2.0 OC
This is working for all froyo/gb/aosp builds, but if you want max performance on Gingerbread, use the GB version
http://www.multiupload.com/H6TP0LFVJX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.0 OC GB
This is working only on Gingerbread builds. Includes a wpa_suplicant file that will be pushed in your /system/bin folder to enable IEEE 802.1x/EAP authentication and native wifi tethering
http://www.multiupload.com/QV7AHSKTC9
Old versions:
1.9 OC
http://www.multiupload.com/AVBKLQSITQ
1.9 OC GB
http://www.multiupload.com/14RSYK5B28
1.8 OC
http://www.multiupload.com/OGY9NC4M75
1.8 OC GB
http://www.multiupload.com/SRW5CN4OIS
1.7
http://www.multiupload.com/LW7P00W69F
1.6
http://www.multiupload.com/ISZNS4LFH2
1.5
http://www.multiupload.com/NTBNV4EGGN
Click to expand...
Click to collapse
Donations:
I dont ask donations for this because mainly is based on the work from others and they deserves more than a "thanks". But since I put some efforts in this, would be nice if you can click on my "thanks" button to show you are thankful for this work
Anyway if you still want to offer me a coffe, it's appreciated.
Click to expand...
Click to collapse
Undervolting/Overvolting via SysFS
This is a risky operation.
You can burn your CPU. Do it at your risk.
I'm not responsible if you damage your phone. If you are doing this, is supposed you know what are you doing.
You can set the UV/OV values using some simple commands in shell or writing them in a file to push in your /system/etc/init.d folder that will be executed on boot.
File must be named like XXvoltages, where XX is a number that is not used by any other file in the folder.
Please find here an example file (credits: tyween) to restore on boot the voltage levels to standard one (1050mv)
If you want to change, just unpack the zip, change the 12vddlevels to your preferred one and re-pack the zip, to flash it via cwr or push the single file with adb or droid explorer or anything else.
http://www.multiupload.com/8CP9AF9UGO
Advanced Instructions from -snq
usage:
query: (output: first column: frequency (kHz), second column: vdd* (mV))
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
128000: 950
245000: 950
384000: 975
422400: 975
460800: 1000
499200: 1025
537600: 1025
576000: 1050
614400: 1075
652800: 1100
691200: 1125
729600: 1150
768000: 1175
806400: 1200
844800: 1200
883200: 1225
921600: 1225
960000: 1250
998400: 1275
1036800: 1275
1075200: 1275
1113600: 1300
1152000: 1300
1190400: 1300
incrementing/decrementing all levels by a specified amount* (mV):
Code:
echo '-25' > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
echo '+25' > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
adjusting the supply voltage* (second value, mV) at a specific frequency (first value, kHz):
Code:
echo '998400 1250' > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
*: vdd values must be a multiple of 25 (enforced by the interface; the regulator doesn't accept other values - found out in the hard way)
please note that the values set through this interface will only be written to the acpu table - they will only become effective when the specific frequency is (re)set by cpufreq
i took the input parser from iscaela's code - thanks for it
do not apply this patch if you plan to use avs
to query the constraints of the regulator ("max_microvolts", "min_microvolts") or the voltage currently supplied to the cpu ("microvolts" (uV)):
Code:
grep '.' /sys/class/i2c-adapter/i2c-0/0-0048/regulator/regulator.0/*
Click to expand...
Click to collapse
cool will test
You might want to add in nice big caps no official extended battery support (I'm guessing it doesn't), won't be long until the requests flood in!!!
Sent from my DL DesireZ v3.4 final using Tapatalk
sorry but how do in install this via clock work ??
m_segura420 said:
sorry but how do in install this via clock work ??
Click to expand...
Click to collapse
Just open the recovery from the Magldr, choose the option update.zip and browse the file which should be on the root of your SD card. That's it. Reboot to Android.
Good to see a kernel developer! I will try this
Sent from my HTC HD2 using XDA App
Is this kernel also for SD builds or NAND only?
back to 1.5
i installed 1.6,waited 5',shutted down the phone,then again->on-rebooted 3 times....data corruption....
i have version 2.3 with ext4 1gb
going to wipe all and do fresh start with ext3 4kb
edit: after wipping only the ext part from ext4 to ext3,restored from CWM,updated the kernel,no more corruptions!!!
only issue ..its a little laggyyy,i think that 1.5 was faster...
edit2: back to 1.5...much better
1.6->to much lag,startup time very long,screen reaction not like 1.5,battery drenage BAD
Very nice kernel, I was on the brink of starting my own as I was waiting for the new proximity sensor/light sensor fixes to be implemented but yours is now on my HD2.
One thing, it did think my battery was at 0% until I pulled the charger and started charging again in which it then shot back up to 100%.
I have high battery drain on standby mode about 267mA with this kernel
i want to downgrade it to 1.5, can u pls give me the link of kernel 1.5?
with all the respect for raf...
here you go
http://www.multiupload.com/NTBNV4EGGN
Are you becoming a hacker?
Thanks, great.
i am using your DHD build, does it have this version of the kernal or i should update with this?
does this kernel support Extended battery ?
Some one is reporting higher battery drain then 1.5 but no changes are made to 1.6 except the g-sensor calibration fix.
I think that cause you have to reboot to install the kernel, you will always have an high battery drain on next boot with new kernel. Wait 10-20 minutes and you will see low battery drain. Actually I have 4ma in standby.
Nice try
calibrating the g sensor
boba23 said:
I can top that ;-) 3ma with markinus 1.71 build. great job raf, g-sensor cal works perfectly fine now, [email protected] .
boba
Click to expand...
Click to collapse
Hi, what did you use to calibrate the g sensor. I thought stock android did not come with any calibration tool
Thanks RAF.
i hope You will use that kernel for the next version of RafDroid.
Kazz88 said:
Hi, what did you use to calibrate the g sensor. I thought stock android did not come with any calibration tool
Click to expand...
Click to collapse
Markinus 1.71 is a DesireHD based build but with out HTC sense. It has the calibration tool
Sent from my HTC HD2 using XDA App
shree.cse said:
Markinus 1.71 is a DesireHD based build but with out HTC sense. It has the calibration tool
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
o i see. thank you. would anyone know the best way to calibrate a stock build with this fix. i dnt think apps from market would work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I HAVE DECIDED NOT TO CONTINUE WITH BOZ EDITION MIUI. I DO NOT HAVE THE TIME FOR IT AT THIS MOMENT IN TIME. IF I EVER DO RETURN THEN I WILL UPDATE THE THREAD. NOT VERY LIKELY THOUGH.
-Description-
MIUI BOZ Edition for Samsung Galaxy S devices is a modified version of the MIUI ROM. I aim to provide the most personal experience with MIUI. I hope you all enjoy this release of MIUI.
This version is very similar to the other XDA MIUI version. See link here: http://forum.xda-developers.com/showthread.php?t=992251
This version of MIUI also uses an exclusive kernel made by TK-Glitch to achieve insanely high overclocks. A standalone version of TK-Glitches less extreme kernel is available for download here: http://forum.xda-developers.com/showthread.php?t=1041532
-Working-
-Phone.
-2G/3G.
-Internal SD Card.
-Home button.
-Volume keys.
-Touchkeys.
-WiFi.
-Sound.
-Theme Manager.
-Camera. (still choppy)
-File Manager
-External SD.
-Market.
-PC Sync in file browser.
Click to expand...
Click to collapse
-Not working-
-Some CM7 bugs.
-Battery drain (Should be fixed soon.)
-Full features of Camera
-TV OUT
-720p Recording
-MKV playback can be choppy.
Click to expand...
Click to collapse
-Screen shots-
V9 PRE RELEASE VIDEO: http://www.youtube.com/watch?v=PIkE6pdXghc
V6 BLUE EDITION VIDEO: http://www.youtube.com/watch?v=ZRaye8MnS4M
-Installation instructions-
New install
Be sure that you're based on a Froyo FW! CRUCIAL.
1: Download these files:
a) galaxy-efsbackup.zip
b) cm7-galaxys-initial-kernel.tar
c) MIUI Version. (e.g. BOZ V5.zip)
d) speedmod-kernel-k13c-500hz.tar
2: Copy "galaxy-efsbackup.zip" and your MIUI version to internal SD.
3: Flash "speedmod-kernel-k13c-500hz.tar" via Odin, wait for reboot and after that shutdown
4: Start via 3-button-combo in recovery mode and install "galaxys-efsbackup.zip"
5: Pull out battery and in again, start via 3-button-combo via download mode and flash cm7-galaxys-initial-kernel.tar via Odin BUT DON'T check repartition and auto reboot
6: Pull out the USB cable and start (in download mode) with 3-button-combo in recovery mode (waiting until samsung logo appears)
7: Choose "mounts & storage" and format system, data, cache
8: Flash "MIUI Version".
Upgrade
1: Download "MIUI Version" (e.g. BOZ V5)
2: Load "MIUI Version" to internal SD
3: Boot phone into CWM
4: Install zip from SD
5: Select "MIUI Version" and install
6: Reboot phone.
Click to expand...
Click to collapse
-Latest version-
-BOZ V10 013/05/2011
- Upgraded to MIUI 1.5.13
- Removed calculator
- Added TWcalculator
Special thanks to Galnet for the following fixes/enhancements.
- Battery fixes
- Speed improvements
- TWiz support beta
- Sound improvement
- Wifi improvment
- Music player picture improvement
- 720p recording
- Sensor fixes
Download: http://www.multiupload.com/9ZDLLS2L8E
Click to expand...
Click to collapse
-Tips-
-Best Performance : Battery life ratio-
OPTION 1: Single frequency, default 1GHz.
-After installing the rom, download and install "Pimp My CPU" (DO NOT INSTALL SET CPU)
-Run "Pimp My CPU"
-Change scheduler to CFQ and governer to performance.
-Set both min and max frequencies to 1GHz
-Click on the 1GHz step and tune down the voltage to -200mV to result a final voltage of 1050mV (Or around this figure)
-Press menu button and save profile
-Press menu button, then press more, then set your new profile as boot settings.
-Do not enable other frequencies. This will cause instability with this type of Undervolt.
OPTION 2: Single frequency, Over or Underclock.
-After installing the rom, download and install "Pimp My CPU" (DO NOT INSTALL SET CPU)
-Run "Pimp My CPU"
-Change scheduler to CFQ and governer to performance.
-Set both min and max frequencies to a desired frequency
-Set undervolt amount, examples below;
1500MHz - 1.35V (-150mV)
1400MHz - 1.25V (-200mV)
1300MHz - 1.15V (-250mV)
1000MHz - 1.05V (-200mV)
0800MHz - 0.95V (-250mV)
-Press menu button and save profile
-Press menu button, then press more, then set your new profile as boot settings.
-Do not enable other frequencies. This will cause instability with this type of Undervolt.
OPTION 3: Multi frequency.
DO IT YOURSELF... LOL
Click to expand...
Click to collapse
Older Versions
-BOZ V9.5 08/05/2011
- TK-Glitch V8A kernel
- New drivers (Thanks Currydude)
- Camera preview fixed
- Camera zoom fixed
- Higher quality photo/video
Download: http://www.multiupload.com/DV5323N49P
Click to expand...
Click to collapse
-BOZ V9.2 07/05/2011
- Fixed WIFI error
Download: http://www.multiupload.com/L0XHJI1BVQ
Click to expand...
Click to collapse
-BOZ V9.1 07/05/2011
- Fixed boot loop upon reboot
- Fixed camera SD detection
- Using TK V7C kernel. (V8 will break camera until new update)
- Battery improved.
Download: http://www.multiupload.com/96DKM4FW2C
Click to expand...
Click to collapse
-BOZ V9 06/05/2011
- Upgraded to MIUI 1.5.6
- Upgraded to Android 2.3.4
- New customized BOZ dark theme
- Orange themed keyboard
- Removed 3D gallery
Download: http://www.multiupload.com/2J2HY6MZAN
Click to expand...
Click to collapse
-BOZ V8B 04/05/2011
- Fixed scripts
- Updated kernel to allow better UV
Download: http://www.multiupload.com/DT8O0SH4ZX
Click to expand...
Click to collapse
-BOZ V8 02/05/2011
- New drivers from CM7 (Thanks Galnet!)
- Compass fixed
- New OC kernel V6X (Compatible with new drivers)
Download: http://www.multiupload.com/SNIHF78Y43
Recommended not to use this version! Use V8B instead.
Click to expand...
Click to collapse
-BOZ V7 29/04/2011
- Upgraded to MIUI 1.4.29
Download: http://www.multiupload.com/SF8SAWITAH
Click to expand...
Click to collapse
-BOZ v6C BLUE 27/04/2011
- Fixed music settings FC
Download: http://www.multiupload.com/QK5OM04SJJ
Click to expand...
Click to collapse
-BOZ v6B BLUE 26/04/2011
- Fixed settings FC
Download: http://www.multiupload.com/EYLNXHJZF0
Click to expand...
Click to collapse
-BOZ v6 BLUE 26/04/2011
- New BOZ theme.
- New blue keyboard.
- Blue theme.
- New ringtones, notifications.
- New UI Audio.
Download: http://www.multiupload.com/ANIAKDORS9
Click to expand...
Click to collapse
-BOZ v5C 24/04/2011
- New orange themed keyboard.
- Fixed text prediction.
Download: http://www.multiupload.com/517DNR2Y3I
Click to expand...
Click to collapse
-BOZ v5B 23/04/2011
- Fixed external SD
Download: http://www.multiupload.com/84A6X4R4CN
Click to expand...
Click to collapse
-BOZ v5 22/04/2011
- GPU Fixed. (Improved drivers from Nexus S)
- Android Camera Removed.
- File Manager Removed. (MIUI File Explorer still present.)
- 3D Gallery Added.
- Updated Language Pack To Latest Version. (1C)
- Using JVK Modem. Using JPG.
- Using Antlion Kernal.
- Changed orange theme to blue. Reverted back to orange.
- Default Icons Iphone Style.
- MIUI Theme And Icons Available.
- Based on RC5b which is based on BOZ V3.
- Using TKGlitch EXTREME kernel (Exclusive to MIUI BOZ.)
- OC upto 1.44GHz 1.54GHz
- Updated to 1.4.22
- Using latest language pack from Nexus S (Modified) (Gets the rom to you guys quicker.)
Download: http://www.multiupload.com/MDZIVBMGL9
Click to expand...
Click to collapse
Credits
Codeworkx
Coolya
jblanc
Kenia1234
g4rb4g3
Zygame
MAMBO04
TK-Glitch
Bozdag
Galnet
Currydude
Donate
If you wish to donate to me for my work, you can do so by sending funds through paypal to; [email protected]
will try this also.currently on your previous edition. will report back. thanks bozdag
Will try.
!0...
can i install it to my MIUI v1.4.15 installed Galaxy S ?
Yes. Just update it no need to wipe data.
i was on bozdag v4a edition earlier. now have flashed this one. but the phone starts rebooting during the call. is it due to different kernels
doccrow said:
i was on bozdag v4a edition earlier. now have flashed this one. but the phone starts rebooting during the call. is it due to different kernels
Click to expand...
Click to collapse
I will test it now. Have you set any OC/UV?
Epic dl'ing now and gonna try it out . Can't wait to see if my SGS runs on 1,54Ghz stable!
Awesome rom! My friend tried it and it's good. Keep up the good work
bozdag said:
I will test it now. Have you set any OC/UV?
Click to expand...
Click to collapse
No all default
Sent from my GT-I9000 using XDA Premium App
It works fine for me. Try using TK-Glitches other kernel. See if it works.
bozdag said:
It works fine for me. Try using TK-Glitches other kernel. See if it works.
Click to expand...
Click to collapse
Will try tnx
Sent from my GT-I9000 using XDA Premium App
Hey Boz....Nice to see you made your own thread dude...
And jesus ...thats one hell of an OC for the SGS .....Feeling HOT HOT HOT lol
rixsta said:
Hey Boz....Nice to see you made your own thread dude...
And jesus ...thats one hell of an OC for the SGS .....Feeling HOT HOT HOT lol
Click to expand...
Click to collapse
Undervolt it. But first you need to set it so the CPU freq doesn't scale up and down. Check first page second post for an example with 1GHz.
Unfortunatly my SGS isn't capable of handling 1,54Ghz. Tried undervolting (perhaps it didn't like the 1.5volts).
Too bad 1,44Ghz is it's limit for mine.
Awesome job on the rom tho! Loving it uptill now
FuzionNL said:
Unfortunatly my SGS isn't capable of handling 1,54Ghz. Tried undervolting (perhaps it didn't like the 1.5volts).
Too bad 1,44Ghz is it's limit for mine.
Awesome job on the rom tho! Loving it uptill now
Click to expand...
Click to collapse
Did you give 1.5GHz a try? Most devices will go upto 1.5GHz.
Did you fix Radio FM?
I got big issue with data of my APS. I don't know why but MIUI mount partition /datadata to /data/data this is wrong becouse it's only 200MB... I got it full afte 60-70aps. Is it possible to change it? To fix it?
System get crush after it is full so the best idea is to unmount /datadata->/data/data and make /data/data like separate folder on /data partition. I hope you understand me.
suntzu123 said:
Did you fix Radio FM?
Click to expand...
Click to collapse
No Radio FM.
Sent from my GT-I9000
FuzionNL said:
Unfortunatly my SGS isn't capable of handling 1,54Ghz. Tried undervolting (perhaps it didn't like the 1.5volts).
Too bad 1,44Ghz is it's limit for mine.
Awesome job on the rom tho! Loving it uptill now
Click to expand...
Click to collapse
I'm currently working on higher frequencies for V6A release. 1.5GHz could be added in next V6pre (update 3) if I get good results.
The V5X kernel used in this rom is truely extreme and especially the 1.5 and 1.54GHz steps. GPU is overclocked linearly to 250MHz for 1.5GHz and 257MHz for 1.54GHz along with the general bus speed. For most devices, 250MHz will be about the maximum useable. 257MHz will only work on a few devices, but it's very close to the hardware limits. With this bus speed increase, 1.54GHz is faster than 1.6GHz at stock bus.
Android 2.3.7 - Cyanogen Mod 7.1.0 For Galaxy GIO
Based on Cooper, Tass & Galaxy 5
NOTE: This project is not finished yet and i am not maintain this Cyanogen Mod 7.1.0 again.
go to This Thread for latest CyanogenMod ROM
THE ONLY RULE ON CYANOGENMOD: YOU DONT ASK FOR ETA
Current status:
Working:
RIL
ext4 on all internal partition
Audio
capasitive key & back light
Proxomity sensor
Microphone
Root & Busybox
Setup wizard
included gapps
autorotate
packet data
GPRS &EDGE (2G)
HSDPA & UMTS (3G)
Call, sms & mms
GPS
Swap support
usb mass storage
headset button. so u can play/pause music & goto next song from this button
Bluetooth
Wifi
FM Radio (Bluetooth must enabled)
Camera & Video record
Wired Tether using wiredtether.apk (see post & attachment on second post)
Access Point / Portable Hotspot
automatically configured APN
Hardware video acceleration
and more
Not working:
----
Issue:
Backlight after set brightness
some option on setting
noise on FM radio
if u find any bug, please tell us
I am not responsible for any damage to your phone
please read carefully how to install
How to Install
Code:
- Download & flash px-cwm-v2.zip from recovery or cwm recovery
- Reboot to cwm recovery again
- Download & flash px-cm7-RC-3.0.zip from cwm recovery
- Reboot your phone
- Its not recomennded to use live walpaper, u should use static walpaper. since live walpaper will make your device hot & drain more battery
- Since this version is not include gapps & a2sd, u should read gapps & s2e section!
- for alternative a2sd, u also can use link2sd or mad2sd
How Install google apps (gapps):
Code:
- Download it from here: http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
- Download latest version for cyanogenMod 7
- Flash it from cwm recovery
How to Install & Enable Simple2Ext (S2E):
Code:
- install it from market. be sure u've install gapps before!
- open s2e, and press menu and choose setting
- checklist the advance mode, extended partitions info, mount as ext4
- u also can set read buffer. i'm using 3Mb
- press back, and press menu -> reboot
- if your phone not automatic reboot, u should reboot it manually
- after reboot, open s2e again. u can check whatever u want
- i'm check it all, except Application data (Application data = a2sd extream datasd)
- reboot again
- u need to modified 02gio. see this post http://forum.xda-developers.com/showpost.php?p=19792902&postcount=705
have problem cant checklist application, dalvik-cache, private-apps application-data on s2e after checked mount as ext4 and reboot?
you must format your second partition using computer as ext4
u can use gparted (linux) or minitool partition wizard (windows)
How Enable a2sd:
Code:
- goto terminal emulator
- write:
su
a2sd zipalign
a2sd cachesdreset
and:
if u want use a2sd extream (move data to sd-ext):
a2sd datasd
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Additional Feature from member & developer
Randomboot animation & market v 2.3.6 by squadzone -> here
Stock samsung keyboard on cm7 by belyava -> Here
Transparent Touchwiz (samsung home) by shiftyHungary -> here
Source: https://github.com/phiexz
please help us to develop this rom, and tell us if you found another bugs
Changelog & Download link
Changelog
New CWM v2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
special thx to ZimniY
fix error mount command
remove rfs support
New RC 3.0
new build (new feature like: can change network preferences, minimal ring lockscreen, etc)
include all fix
removed a2sd (better use s2e than a2sd)
removed gapps
removed no-frills (use cm-setting to change cpu min max & governor)
smoother
better ram management (kernel patch)
fix cm-setting for change min & max cpu frequency (kernel patch)
revert backlight. sometime led cant off after set brightness. restart to make it normal again
update default governor to: ondemand min:245Mhz max:787Mhz
and more
note: this version is not coming with google apps, u should download & install it manually
note: this version is not coming with preinstalled a2sd DarkTremor. better to use s2e a.k.a simple 2 ext. download it from market!
New RC 2.0
Fixed Access Point / Portable Hotspot now u dont need 3rd application
modified many library, thx to squadzone
reduce noise when listen FM-Radio
Fixed new market for Force Close. now u can use new market
change a2sd mountpoint from /system/sd to /sd-ext
trying to patch backlight again, please check & report!
Change dafault cpu clock & governor to: min:245 max:787 gov: interactiveX
if you dont like this governor, try to change with no-Frills application
- New Patch 2.2
fixed camera orientation on cm7 camera application (thanks to demon-e398)
fixed automatic APN setting
goto setting -> wifi&network -> mobile network ->access point name - press menu button & tap to Reset to default
Deleted wiredtether.apk from /system/app
you should install it as usual don't push to /system/app, download it from attachment below
kernel updatet (cf-root release 5)
Busybox upgraded from 1.17-> 1.19-CM71-bionic
Latest Superuser.apk & su binary
- New Patch fix-2, Camera & backlight fixed & added new boot script
thx to galaxy gio cummunity @ facebook for camera, waqasshahzad1986 for backlight issue fix & squadzone for boot script
- New Patch fix-1, it should fix a2sd DarkTremor, bluetooth, wifi & FM-Radio
- New Kernel px-cm7-kernel+cfroot-release-3.2 fixed backlight issue, sometime backlight still on even screen in locked
- First version Relase (beta)
Download Link
ClockWorkMod Recovery 5.x
Based on particle's CWM Recovery, only add ext4 support for system, data & cache
px-cwm-v2.zip Download here [New]
px-cwm.zip]Download Here [outdated]
CyanogenMod 7.1 for Galaxy GIO
cyanogenMod 7.1 RC 3.0 Download Here [New]
cyanogenMod 7.1 RC 2.0 Download Here [outdated]
First release, Download Here [outdated]
Addons & Patchl
px-cm7-addons-fix-2.2 Download Here [outdated]
px-cm7-addons-fix-1 Download Here [outdated]
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Alternatiive kernel
It's outdated... please dont use this kernel. new kernel is included on addons
we use alternative kernel, it's based on SGA & SGS CF-Root Kernel. because we have a problem on CM7 initramfs kernel on our device. maybe it'll fixed soon.
tempoary, use this kernel to make your phone bootup
px-cm7-kernel+cfroot-release-3.2 Download Here [outdated]
px-cm7-kernel+cfroot-release-3.1 Download Here [outdated]
special thx
special thx to:
Hyriand for kernel source & CWM
squadzone i port this rom with him
Chainfire and ketut.kumajaya for CF-Root kernel, i'm ported theirs kernel
Grif_07 and BehradGH and tj_style for their cyanogenMod 7, some lib & file based on their work
Some screen shoot
waiting......
phiexz: do you guys have a Git repo I could take a look at?
I'm having some trouble building CM7 for the Gio5660M. I'm hitting the following error:
make: *** No rule to make target `out/target/product/gio5660M/obj/lib/libaudio.so', needed by `out/target/product/gio5660M/obj/SHARED_LIBRARIES/libaudioflinger_intermediates/LINKED/libaudioflinger.so'. Stop.
Thanks in advance,
Darkshado
Wow, ss looks nice a pity im not a developer, and i cant help u guys
phiexz, u're such a genius man, many people depends on u guys 'bout this cm7, i really appreciate of your hard work to build n finish this rom
i've got one little question :
should i repartition my sdcard to ext4, 'coz my sdcard partition is ext2 right now ??
thanks b4 n after !!!
we need some one can make cyanogen initramfs for this rom
Darkshado said:
phiexz: do you guys have a Git repo I could take a look at?
I'm having some trouble building CM7 for the Gio5660M. I'm hitting the following error:
make: *** No rule to make target `out/target/product/gio5660M/obj/lib/libaudio.so', needed by `out/target/product/gio5660M/obj/SHARED_LIBRARIES/libaudioflinger_intermediates/LINKED/libaudioflinger.so'. Stop.
Thanks in advance,
Darkshado
Click to expand...
Click to collapse
no i dont have cm7 github, i only have kernel github
falqon said:
phiexz, u're such a genius man, many people depends on u guys 'bout this cm7, i really appreciate of your hard work to build n finish this rom
i've got one little question :
should i repartition my sdcard to ext4, 'coz my sdcard partition is ext2 right now ??
thanks b4 n after !!!
Click to expand...
Click to collapse
its upto you, u can use ext2 or ext2
Good work, mr Andika.
we hope that CM7 for gio will not get the dev out in the middle of its way
Whats the clock speed of the cpu. ur scores are pretty high. I m using the 2.3.4 particle with 902 mhz but unable to get such a high score. i scored about 2087
waqasleo17 said:
Whats the clock speed of the cpu. ur scores are pretty high. I m using the 2.3.4 particle with 902 mhz but unable to get such a high score. i scored about 2087
Click to expand...
Click to collapse
my score was only 1940 its use 806mhz + bfq i/o + some tweak from cf-root
i wont use high frequency, because it can harm my device
Erm, whr is the download link for the px kang?
Sent from my GT-S5660 using XDA Premium App
shuegig said:
Erm, whr is the download link for the px kang?
Sent from my GT-S5660 using XDA Premium App
Click to expand...
Click to collapse
second post
Oh, sorry i tot it was the previous beta.cm7
Btw, is the wifi gonna be fixed soon? Cos as far as i see it, its the only big prob for me
And is there anything we non developers can do?
Sent from my GT-S5660 using XDA Premium App
shuegig said:
Btw, is the wifi gonna be fixed soon? Cos as far as i see it, its the only big prob for me
And is there anything we non developers can do?
Sent from my GT-S5660 using XDA Premium App
Click to expand...
Click to collapse
yes we can do a thing bro.... support them. Never ask the ETA or push them to fix it soon . give them space for their own personal matters (school, etc)
klebengan said:
yes we can do a thing bro.... support them. Never ask the ETA or push them to fix it soon . give them space for their own personal matters (school, etc)
Click to expand...
Click to collapse
Oops, sorry lol whats eta btw? B-)
Sent from my GT-S5660 using XDA Premium App
shuegig said:
Oops, sorry lol whats eta btw? B-)
Sent from my GT-S5660 using XDA Premium App
Click to expand...
Click to collapse
Estimated Time of Arrival the deadline in other word
dont ask about ETA, feel free to help us
nb: nampang ah, wkwkwkwkwk
squadzone said:
dont ask about ETA, feel free to help us
nb: nampang ah, wkwkwkwkwk
Click to expand...
Click to collapse
O okay.. How? Lol
Sent from my GT-S5660 using XDA Premium App
·:*¨¨*:·..·:*¨☆007☆·:*¨¨*:·..·:*¨
straight from The Land of Smiles
Jame Bond kernels have always been about battery efficiency without sacrificing speed...
-latest version-v3.7.1
☆★☆★☆
-linaro gcc
-some debugging disabled
-undervolted
-interactive governor (default) is recommended
-GPU set to 307MHz
-boots to 1.2 (oc to 1.3)
-cm color control
-eze sound control
-imoseyon gamma control
-installation/Tweaks (colors)
Click to expand...
Click to collapse
-uv settings
Click to expand...
Click to collapse
-protips
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
note: please "rate" the thread
Thank you to those that have! If you are new to this thread, browse through the pages. I always try to answer questions quickly and thoroughly, as well as provide a stable kernel. If this kernel doesn't have the "features" you are looking for, or you have seen a cool new mod, just ask and I will try to accommodate (or at least give a reason why not)
thanks for your time -og
acronyms, notes, etc.
deprecated kernels
***************************************************************************************************************************************
4.2.x kernel(s)
1.2/3.5GHz◊GPU 307MHz
☆007☆ v3.7.1
Click to expand...
Click to collapse
4.1.x kernel(s)
that thae
1.2/3.5GHz◊GPU 307MHz
☆Jame Bond☆ v3.4
1.2/3.5GHz◊GPU 307MHz
☆Jame Bond☆ v3.3
mirror
khlang
1.2/3.5GHz◊GPU 307MHz
☆Jame Bond☆ v3.4.6
Click to expand...
Click to collapse
_____________________________________________________________________
thanks to coolbho3000 for his patches
support setcpu
» kernel source
» additional source
Control your Android phone's CPU! SetCPU for Root Users
installation
2 ways...
-download and extract boot.img from zip...non-ak versions
-enter fastboot mode by (with phone off) press and hold volume up&down and then power
then to test (reverts on reboot)
Code:
fastboot boot boot.img
to flash
Code:
fastboot flash boot boot.img
or
-download to sd card and flash from recovery
tweaks
version 3.7.x has several "tweaks" that are controlled in system/etc/init.d/007tweaks
-color control
-gamma control
-volume boost
-high performance sound
everything boots to stock settings
included is system/etc/init.d/007tweaks.bkk which are my preferred settings (just rename to 007tweaks)
also can be adjusted with (most likely not colors) GLaDOS Control and Trinity Kernel Toolbox (as well as other kernel apps)
007tweaks
Code:
#!/system/bin/sh
echo "0" > /sys/class/misc/samoled_color/red_v1_offset
echo "0" > /sys/class/misc/samoled_color/green_v1_offset
echo "0" > /sys/class/misc/samoled_color/blue_v1_offset
#default 0 0 0
echo "1670000000" > /sys/class/misc/samoled_color/red_multiplier
echo "1880000000" > /sys/class/misc/samoled_color/green_multiplier
echo "2000000000" > /sys/class/misc/samoled_color/blue_multiplier
#default 2004318071 2004318071 2004318071
mount -o remount,noauto_da_alloc /data /data
echo "0" > /sys/devices/platform/omapdss/manager0/gamma
#default 5 off 0 max 10 (10 being darkest)
echo "2" > /sys/class/misc/soundcontrol/volume_boost
#default 0 max 3
echo "0" > /sys/class/misc/soundcontrol/highperf_enabled
#default 0
permissions are set on flashing, but if changed with "es explorer" they need to be reset to
for roms that don't have "color slider adjustments" to have the changes take affect without rebooting, open a terminal and run....
Code:
su <enter>
run-parts /etc/init.d/ <enter>
kernels are preset
don't drop more than 75mV under default
protips-
force desktop mode on google chrome
create the file /data/local/chrome-command-line and add below
Code:
adb shell 'echo \"chrome --user-agent="[Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/535.19 (KHTML, like Gecko) Chrome/18.0.1025.45 Safari/535.19]"\" > /data/local/chrome-command-line'
Click to expand...
Click to collapse
[GUIDE] Proper FULL wipe
Click to expand...
Click to collapse
Tutorial: How to properly post a bug
Click to expand...
Click to collapse
galaxy nexus factory images
Click to expand...
Click to collapse
VLC player for android
Click to expand...
Click to collapse
https://plus.google.com/u/0/101056148805473200158/posts/SsowCdLfTPn
Click to expand...
Click to collapse
-for better scrolling in apps (specifically twitter) go to settings/developer options and select "Force GPU rendering"
*may crash other non-ics optimized apps(twiiter updated for ics)
Click to expand...
Click to collapse
-cool recovery trick to get rid of all the extra "no's" (recovery)
Code:
adb shell
touch /sdcard/clockworkmod/.one_confirm
Click to expand...
Click to collapse
-md5 mismatch (recovery)
Code:
adb shell
cd /sdcard/clockworkmod/backup/2011-11-29.18.20.30
rm nandroid.md5
md5sum *img > nandroid.md5
Click to expand...
Click to collapse
enable 3g video chat (easiest way)
download this from market
Click to expand...
Click to collapse
battery saving tips-
disable gps unless navigating
don't use active widgets that need data
use 2g in low 3g signal areas
2g uses the least power
wifi uses less power than 3g
4g uses the most power, avoid when possible
Click to expand...
Click to collapse
great standby
overnight deep sleep (gsm)(ics)
more to come...
Omg happy to see you. Getting all the Samsung all stars here.
Sent from my Galaxy Nexus using XDA App
Can work with ARHD 2.1.2?
siewsphone said:
Can work with ARHD 2.1.2?
Click to expand...
Click to collapse
Shoult work! ARHD is 4.0.2! Try it out!
Im try it:
fastboot boot boot.img
But Device need to boot cca. 10-15 minutes. also Boot animation(THIS one) is very slow.
Does it have gpu oc?
Sent from my Galaxy Nexus using XDA App
anyone know why my phone need 1325mV for 350Mhz to work?
My settings:
350 / 1325mV
700 / 1175mV
920 / 1200mV
1200 / 1200mV
1400 / 1250mV
OTG
does it support OTG?
Great to see you in this forum mate. I loved your Kernel for the SGSII. I will be definately flashing it when AOSP pushes 4.0.3 properly.
tested on ARHD 2.1.2 and works fine
great job ogdobber
Nice to see a 4.0.2 kernel, thought we were forgotten.
Would you post an Anykernel version with just the kernel.
Thanks
Muchly appreciated! +1 to seeing a 4.0.2 kernel..
All running smooth as silk so far...
Kraenesk said:
Does it have gpu oc?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
yes the gpu is set to 384
siewsphone said:
anyone know why my phone need 1325mV for 350Mhz to work?
My settings:
350 / 1325mV
700 / 1175mV
920 / 1200mV
1200 / 1200mV
1400 / 1250mV
Click to expand...
Click to collapse
those settings look way off check post 3
ymr0211 said:
does it support OTG?
Click to expand...
Click to collapse
yes, but not usb storage. I forgot all about that. I have been using chainfires stickmount app. It does support keyboard and mouse though.
Gingernut78 said:
Nice to see a 4.0.2 kernel, thought we were forgotten.
Would you post an Anykernel version with just the kernel.
Thanks
Click to expand...
Click to collapse
I will upload it shortly
Cool, thanks for the anykernel version. Didn't want to flash the boot.img as it will overwrite the tweaked boot.img from ARHD 2.1.2.
When I clock down the CPU to 1200, will the 384 for GPU will stay?
Originally Posted by ogdobber
yes i can tell you I hate the naming game...and I'm not good at it
v.1.x.x kernels are basically stock kernels with undervolting and overclocking ability
v2.1 are nd kernel variations
v.2.2.x are fs version...
v2.3.x ndsf
v2.4.x socfs
vX= major change
vx.X=minor change
vx.x.X=variation of that version
I still need to cleanup as long as you can read this line...
meaning there are currently socfs kernels that are 2.3.x ans ndfs that are 2.2.x
I admit , its a mess, but i will get it organized
Click to expand...
Click to collapse
acronyms explained
ND=non-debug
fs=fsync disabled
ndfs=add the ^above
socfs= it is a ndfs building with a different config
cc= color control
fc= fast charge (usb)
mv= morfic vibration
ak= any kernel. keeps original ramdisk(all roms)
up2u=kernel will boot to stock voltages (must be user set)
*not all phones will be able to run 1.4GHz
-ND and fs kernels will see a significant battery savings in standby
Will the Kernel boot @ standard voltages or is he already undervolted, when yes, can you post standard voltages, thanks!
NOTE:
1- First tnx to @soniCron for his amazing work for governor profile... here
2- I edited GhostPepper in to the init.d script and values completly with XZ cpu cores frequency.
3- No need to run terminal any more for set profile at any boot! or use third-party kernel manager or profile manager apps. only copy/past, set permissions, reboot and BINGO
BACKGROUND:
I test Butterfly (from HTC10) profile and MadDog from (Nexus 5x) and edit that for xperia xz. After multi time test and check diffrent values... i fine GhostPepper v1.3 is a complex of smooth like butter, good performance in games and best battery life for day to day use.
Quote from @soniCron :
Uses a quantized, frequency-aligned parametric curve to influence low core clock rates while providing extremely smooth transitions from each clock rate and exceptional battery life. The current favorite, albeit not very well tested so far. HIGHLY RECOMMENDED
Click to expand...
Click to collapse
REQUIREMENTS:
1- rooted xperia xz
2- enable init.d (see post2)
3- TWRP recovery installed (for enable init.d)
4- any file manager with root browsing feature. (or use twrp built-in file manager!)5- enough knowlage about linux permissions, governor, init.d
CREDITS:
@Ryuinferno for add init.d support to any android kernel here
@soniCron for interactive governor tweaks here
@AndroPlus for kernel and twrp for Xperia XZ here & here
DOWNLOADS:
https://drive.google.com/file/d/0Bx-04WhcoxYlLUdLd2txSXN6VEk/view?usp=sharing
SCREENSHOT:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
enable ini.d at Xperia XZ
1- download term-init.sh
2- copy the sh file in root of sdcard
3- reboot device to recovery mod
4- in TWRP, go to advanced/mount then mount the "system" partition
5- go to advanced/terminal and run built-in terminal
6- type this commend line by line in terminal:
Code:
cd /sdcard
sh term-init.sh
7- reboot device. go to /data folder and check any Test.log file is there? YES??? woow you now can run any init.d scripts from boot :laugh:
-------------------------------------------------------------------------------------------------------------
NOW copy 99governor file from last post to /system/etc/init.d/
set all permissions "rwxrwxrwx" then reboot your phone
-------------------------------------------------------------------------------------------------------------
Working fine
I will test in some hours and days and give a feedback
karrouma said:
Working fine
I will test in some hours and days and give a feedback
Click to expand...
Click to collapse
Phone speed lower than before.
Before flashing my phone running fast, but now battery are a bit better
Tanks for your feedback
karrouma said:
Phone speed lower than before.
Before flashing my phone running fast, but now battery are a bit better
Click to expand...
Click to collapse
The interactive tweaks change to cpu clock jump step. In medium usage like web surfing or lesson to music you don't need max freq.
Now cpu need more time to raise to max frequency
This profile set gpu clock at maximum for little frame drop in games (play AAA games drain battery fast)
If you no need that only delet init.d folder or delet governor file.
please, help!
sh: can't open 'term-init.sh'
why is it happening?
First mount /system in twrp (your device must be rooted and busybox installed)
Run terminal and
cd /sdcard
sh term.init.sh
OR
sh /sdcard/term-int.sh
Check sh file saved at root of sdcard and check file name
GenomeX said:
First mount /system in twrp (your device must be rooted and busybox installed)
Run terminal and
cd /sdcard
sh term.init.sh
OR
sh /sdcard/term-int.sh
Check sh file saved at root of sdcard and check file name
Click to expand...
Click to collapse
UB - done
TWRP - done
SuperSU - done
in TWRP:
mount system - done
run terminal - done
"cd /sdcard
sh term.init.sh" - done
terminal says "sh: can't open 'term-init.sh' "
term-init.sh is in the root of sdcard, redownloaded it several times (file size 8kb)
what am I doing wrong?
kernel is stock with restored ta and drm fix
Can you make one for drunksauce gov it's the best on Nexus 5X and is used in D.U. has crazy SOT on my Nexus can we get this ported to XZ. If not what do I do to get it ported just open the init file and edit the frequencies and how many CPU like ex: cpu0 cpu1?
Well I tried to port drunk sauce my self using the 99gov for Xperia XZ I found in this thread as a reference for the frequencies on our device. I'm running it now can confirm it is a success. I'll m working on it over the week. If anyone wanna try and give me feedback that be cool. I'm noticing a small drop in proformance in stamina mode but there no lag and SOT seems to be great. Give it a shot :good:
https://drive.google.com/file/d/0B2bXgjj9jECcZkVXOFNfVGYtMXM/view?usp=drivesdk
It´s necesary keeping root to use your modded governor?
thanks in advance
sonice21 said:
It´s necesary keeping root to use your modded governor?
thanks in advance
Click to expand...
Click to collapse
Of course...
:good::good:
The latest update to my port, tried doing a pull request to get help from original devs. I cleaned up some code and changed some values. much better now
https://drive.google.com/open?id=0B2bXgjj9jECcSU5mcmZ0ajFpR3c
Smacksmack206 said:
The latest update to my port, tried doing a pull request to get help from original devs. I cleaned up some code and changed some values. much better now
https://drive.google.com/open?id=0B2bXgjj9jECcSU5mcmZ0ajFpR3c
Click to expand...
Click to collapse
TNX
I check your tweak and feedback.
GenomeX said:
TNX
I check your tweak and feedback.
Click to expand...
Click to collapse
I appreciate it fam. let me know what you think
New update to my DrunkSauce port now on Version 4, Noticed that when I was checking CPU statistics I was showing the most used frequency on LITTLE Cluster was 1593MHz, Also noticed the associated battery drains from this. Added 3072MHZ Target load to LITTLE Cluster and Also changed the Input boost to have LITTLE Cluster firing at lowest frequency 3072MHz for CPU cores 0-3.
Enjoy!!!! Because im loving this thing right now buttery smooth and power saving.
https://drive.google.com/open?id=0B2bXgjj9jECcUVpHQXlYVUFrTDg
Here's what I was talking about earlier
Just updated here is my GitHub so anyone can snag my recent edits. Major improvements overy last commits. Got the original devs looking over my commits. Happying Drunksauce FTW!
-Edit- Drunksauce is the 99governor for our device in my GitHub. And 100drunksauce is the original file from Nexus 5x in my branches. and download from the readme branch
https://github.com/Smacksmack206/Sony-Xperia-XZ/tree/readme-edits
hi! I've installed everything and activated the last edition of governor99, but still get about 3-4 hrs SOT
what am I doing wrong?