[Q&A] [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.6.x TeamWin Recovery Project 4/1
Q&A for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.6.x TeamWin Recovery Project 4/16
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.6.x TeamWin Recovery Project 4/16. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Failed TWRP Install on S6 Edge
Installing on the Galaxy S6 Edge build G925PVPU1AOE2
*Rooted using PingPong Root
*Kernel and Rom are stock and unmodified.
After installing from TWRP Installer on the app exchange the following happened:
1. TWRP Install was successful.
2. Busybox Install was successful.
3. TWRP asked to patch the SD path and Reboot
*Reboot was a success*
4. Selected the Galaxy S6 Build
5. Installed and rebooted to recovery.
...and got a bright white screen with intermittent green lines.
I can almost read letters behind some of the green and said green lines will fluctuate when touched...it will hard reset and it reads when plugged into the PC.
Would pushing the .img through Odin be the best next step to try to get this working?
TWRP Failed on SM-G920I
Hello, I'm from Australia and I got my Galaxy S6, model SM-G920I from Optus. Currently running stock kernel and lollipop 5.0.2 and I was unable to flash TWRP recovery on my device;
-Rooted with CF autoroot
-flashed twrp-2.8.6.2-zeroflte.img via flashify => stuck on boot logo
-flashed twrp-2.8.6.2-zeroflte.img.tar via odin3_v3.10.6 => stuck on boot logo
If anyone was able to help me flash TWRP recovery it would be greatly appreciated!
Solved
Related
Q&A for [RECOVERY] [OFFICIAL] [CWM v6.0.5.1 Advanced] Philz Touch [v6.58.7]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] [OFFICIAL] [CWM v6.0.5.1 Advanced] Philz Touch [v6.58.7]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Error after installing the Philz recovery on i9082
I installed philz recovery on stock i9082 via ODINV3.09,
The Installation went fine and I got "PASS" message on the ODIN, however wen I boot into recovery mode, I get "error" screen,which goes to recovery with no touch options.
Please suggest on how to resolve this issue.
---------- Post added at 07:45 AM ---------- Previous post was at 07:35 AM ----------
I installed philz recovery on stock i9082 via ODINV3.09,
The Installation went fine and I got "PASS" message on the ODIN, however wen I boot into recovery mode, I get "error" screen,which goes to recovery with no touch options.
Please suggest on how to resolve this issue.
Pardon for my noob question..
It's my first to do anything like this on my phone.. do I hove to what they "root" the phone
before installing CWM for the first time?.. thanks a lot
I have just rooted my device through kingroot. I didn't flashed any cwm on it. Do I still flash it through the mobile odin?
I tried to flash it over cmw 6.0.3 and getting boot loop when trying to enter into recovery :thumbdown::thumbdown:
Fixed:updated my is to 4.2.2 and flashed latest philz touch now its working...
Sent from my GT-I9082 using XDA Free mobile app
[Q&A] [Galaxy Note2 TOOLKIT V5.0.0 ATT] Drivers, Backup, Root, Recovery, Flash Stock
Q&A for [Galaxy Note2 TOOLKIT V5.0.0 ATT] Drivers, Backup, Root, Recovery, Flash Stock Image
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Galaxy Note2 TOOLKIT V5.0.0 ATT] Drivers, Backup, Root, Recovery, Flash Stock Image. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
freeze on boot
I flashed the Stock Firmware Image. Odin flashes the file successfully and the phone reboots but it stays stuck on the samsung logo
If the firmware tar file does not include a userdata image (which most Samsung firmware do not) then your userdata partition will be left from your previous setup. If this is incompatible with the new firmware because of build or something else then your system will freeze on boot up.
This is easily fixable by holding the Volume UP, Home and Power buttons all at the same time for about 10 seconds until the device reboots to the Stock Recovery screen. Use the Volume Down button to scroll down to 'wipe data/factory reset' and press the Home button to select it. Go down to yes to confirm and your userdata partition will be wiped. Your device should now boot fine.
This is my exact problem, phone will freeze on bootup, I can get into download mode but can't get into stock recovery mode. Any advice? thanks
[Q&A] [Recovery] Philz Adv CWM 6.55.0 - CWM 6.0.5.0 - TWRP v2.7.1.0 - AROMAFM GT-P52
Q&A for [Recovery] Philz Adv CWM 6.55.0 - CWM 6.0.5.0 - TWRP v2.7.1.0 - AROMAFM GT-P52XX
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Recovery] Philz Adv CWM 6.55.0 - CWM 6.0.5.0 - TWRP v2.7.1.0 - AROMAFM GT-P52XX. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
im unable to get the twrp or philz on my device
hey
i have a gt-p5210 running on 4.4.2 stock firmware and ive been trying to get twrp on my device but i keep getting this error "md5 error! binary is invalid!"
ive also tried the phiz and cmw but i get the same error help please
Sir_curiosity said:
hey
i have a gt-p5210 running on 4.4.2 stock firmware and ive been trying to get twrp on my device but i keep getting this error "md5 error! binary is invalid!"
ive also tried the phiz and cmw but i get the same error help please
Click to expand...
Click to collapse
be sure you're flashing the odin packaged file when flashing through odin.
be sure you're flashing the recovery flashable package when you are flashing through recovery.
on the md5 you can remove the .md5 extension and flash.
all recoveries have been tested and proven. refine or revisit your process.
Additionally read the OP and relevant entries/post in thread completely.
Welcome to XDA !
m
[Q&A] [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.5.x TeamWin Recovery Project 2/1
Q&A for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.5.x TeamWin Recovery Project 2/13
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.5.x TeamWin Recovery Project 2/13. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
[TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.5.x TeamWin Recovery Project 2/13 i have a tmobile note 3 and no version of twp works past TWRP v. 2.6.3.9 . kitkat 4.2 is on there now.
mrjahvi said:
[TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.5.x TeamWin Recovery Project 2/13 i have a tmobile note 3 and no version of twp works past TWRP v. 2.6.3.9 . kitkat 4.2 is on there now.
Click to expand...
Click to collapse
What issue are you having?
when i install the twrps the note 3 stops at boot. cant use recovery for any function. i can only use 2.6.3.9 version to do my tasks. i cant upgrade to a version where i have full access to functions as 2.6.3.9 version.
mrjahvi said:
when i install the twrps the note 3 stops at boot. cant use recovery for any function. i can only use 2.6.3.9 version to do my tasks. i cant upgrade to a version where i have full access to functions as 2.6.3.9 version.
Click to expand...
Click to collapse
You are probably installing the wrong bootloader version. Which file are you flashing with Odin?
mrjahvi said:
[TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.5.x TeamWin Recovery Project 2/13 i have a tmobile note 3 and no version of twp works past TWRP v. 2.6.3.9 . kitkat 4.2 is on there now.
Click to expand...
Click to collapse
I have tried all the twrps and they have all worked for me without any issues... ur running a very old rom, try updating bootloader and modem, then update ur rom...
recommend to wipe system, cache, dalvik cache and if it fails, wipe your data also..
Note 3 n900 Exynos international version
please help,
i gave root access to my phone few days ago and was running the stock lollipop rom and its stock recovery, so in order to install custom roms, i tried to install the twrp recovery with the help of the twrp application. now after installing the app i opened it and it asked for busy box installation and sd card patch to be don in order to write on the sd card. i installed busy box and did the sd patch and after that followed the instruction for the installation, after downloading it asked me to install it and i installed the recovery but strangely it didnot boot my phone, anyhow after few secs it told me to reboot the phone, my phone turned off and while turning on, it is still stuck on the "downloading, do not turn if the target" screen. i can access the download mode only. it is not going either into recovery or booting up or boot loop.
please help..!
Prashantoberoi said:
please help,
i gave root access to my phone few days ago and was running the stock lollipop rom and its stock recovery, so in order to install custom roms, i tried to install the twrp recovery with the help of the twrp application. now after installing the app i opened it and it asked for busy box installation and sd card patch to be don in order to write on the sd card. i installed busy box and did the sd patch and after that followed the instruction for the installation, after downloading it asked me to install it and i installed the recovery but strangely it didnot boot my phone, anyhow after few secs it told me to reboot the phone, my phone turned off and while turning on, it is still stuck on the "downloading, do not turn if the target" screen. i can access the download mode only. it is not going either into recovery or booting up or boot loop.
please help..!
Click to expand...
Click to collapse
Try the following guide: http://android.stackexchange.com/questions/57009/how-to-recover-stock-firmware-on-the-galaxy-note-3
Thanks alot..!! Its working now..
Sent from my SM-N900 using XDA Free mobile app
Twrp img.tar file
I'm using t-mobile Galaxy Note 3 5.0 and trying to get twrp thru Odin. When I download twrp img.tar file my computer asks if I want to open with winzip. I click yes then winzip has a message saying that it's an unsupported archive. How do I get twrp so I can get it to Odin then yo my phone. What am I not doing or what am I doing wrong
Cdmills said:
I'm using t-mobile Galaxy Note 3 5.0 and trying to get twrp thru Odin. When I download twrp img.tar file my computer asks if I want to open with winzip. I click yes then winzip has a message saying that it's an unsupported archive. How do I get twrp so I can get it to Odin then yo my phone. What am I not doing or what am I doing wrong
Click to expand...
Click to collapse
Well, try not opening with winzip....
Sent from my SM-N900T using Tapatalk
[Q&A] [UB ONLY] [AROMA] [CWM or TWRP] (3 in 1) Root & Recovery & Busybox for Lolipop
Q&A for [UB ONLY] [AROMA] [CWM or TWRP] (3 in 1) Root & Recovery & Busybox for Lolipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [UB ONLY] [AROMA] [CWM or TWRP] (3 in 1) Root & Recovery & Busybox for Lolipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
No SU binary installed, and SuperSU cannot install it.
Hi all!
I've used the method from Munjeni to root my Z1 compact, which was already updated to Lollipop using Sony PC companion. I've unlocked the bootloader (using the code provided by Sony) and I've used the boot.img sent by sharonliu. Everything worked perfect, except for the fact that I see this error when opening SuperSU:
--
There is no SU binary installed, and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums for your device!
--
How should I fix this? Is it possible to fix it without wiping all data again (I've just re-installed everything again).
Thanks!
munjeni said:
Hi, I just wrote my own version of the busybox, root and recovery (CWM or TWRP - aroma selection) -> for Lolipop, sharing it with you.
How to install:
- boot into recovery (if you don't have recovery than extract boot.img from any cm11 rom and boot it with "fastboot boot boot.img" , press volume button to enter into recovery mode)
- install zip package trought recovery
Enjoy!
Click to expand...
Click to collapse
No need, if you allready installed it, your installation choice was twrp or cwm munjeni, so simple reboot to the one of these recoveries and simple reinstall zip again, reboot, done
im using z1c stock 5.02 lollipop. unlocked boot loader, can i use it now.....please help ..