This rom is based on CodeAurora's Android Lollipop 5.1 source (AU_LINUX_ANDROID_LA.AF.1.1_RB1.05.01.01.006.028).
I have only made changes that needed to support our device other then that it's pure CAF/AOSP. it has no custom features to provide you stock android experience.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Sources:
CodeAurora
Kernel
What's working:
Almost everything is working including the RIL, camera, audio/video, bluetooth/wifi, sensors, nfc and offline charging.
Know issue:
gps broken, if you find any more issue please report me with logs in this thread.
Note:
It's entirely possible that features not used by me (nor the people I've asked to test) are broken, but overall the device should be usable. You have been warned.
Because of art 1st boot take long time so don't panic and make post saying phone stuck on bootanim,
Dual sim somewhat works. xperia m dual users see this and this post
This is BETA so don't treat this as stable version.
CAF/AOSP is only for 4.3 baseband. If you are on 4.1/4.2 baseband/firmware then Follow this instruction
Download:
BETA 3: https://www.mediafire.com/?o4d0u6p70vqit36
Gapps: http://forum.xda-developers.com/android/software/tk-gapps-t3116347
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053 (If you want to root your phone)
Install instructions:
Before you install make sure you are on 4.3 firmware 1st with your bootloader is Unlocked and a cwm/twrp recovery installed. if you haven't installed recovery then flash boot.img from this rom zip via fastboot. (note: this rom comes with twrp recovery)
boot into recovery
Wipe data and cache
Flash the rom and gapps zip
Reboot
Upgrading from earlier version:
Boot into Recovery
Flash the rom and gapps zip
Reboot
Reporting bugs:
Before Reporting bugs make sure you
Read "note" section
Using stock kernel
Not installed any mods/tweaks - if you have installed mods like xposed you can't report bug
Not modified system files
Checked the posts below for a solution / fix
Read the last 10 pages of this thread for a post with a similar problem
Backup, reflash with a full wipe (do this if mods like xposed is installed) and check if the bug is still there
provide logcat,kmsg. if you reporting radio problem then provide radio log.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
Fxp team and all other developer who is working on sony
Code Aurora Forum
CyanogenMod
XDA:DevDB Information
AOSP/CAF 5.1 for Xperia M, ROM for the Sony Xperia M, ROM for the Sony Xperia M
Contributors
PecanCM
Source Code: https://www.codeaurora.org/cgit/quic/la
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 4.3 Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2015-05-22
Last Updated 2015-07-24
Changelog
Changelog:
BETA 3 22-07-2015
Fixed apps2sd
Fixed local language translations for few apps
few music app fixes from msm8916 branch
other misc fixes
Added qcom's file manager
Built with qualcomm's recommended performance patches
Updated proprietary blobs from lollipop
Updated vidc firmware to latest version
kernel synced with cm
BETA 2 20-06-2015
Updated platform source to CAF tag AU_LINUX_ANDROID_LA.AF.1.1_RB1.05.01.01.006.028
Updated Kernel and Wlan source to CAF tag AU_LINUX_ANDROID_LA.AF.1.1_RB1.05.01.01.006.028
Fixed can't send sms
Fixed offline charging
Fixed bootanimation take long time or sometimes never come
Fixed phone app crash for dual sim
Enabled reboot,airplane mode and sound options
Building missing gps hal and other gps updates - gps still not fully working
Removed FM TX
Updated some proprietary blobs
BETA 1 22-05-2015
Initial release based on AU_LINUX_ANDROID_LA.AF.1.1_RB1.05.01.00.006.027 tag
FAQ
Q: The 'Developer and Performance options' from 'settings' are gone. Where are they?
A: Touch the 'Build number' seven times in 'about phone'. Then they will appear.
Q: Why no root access?
A: This is AOSP rom, if you want root then flash supersu
Q: I'm coming from 4.1 and now i can't view my internal sd data, Why ?
A: Go to Data/media now move your all internal sd data to folder named 0 Means under /data/media/0 then you can view your internal sd data.
Is it using "5.1.1-r2" source or "5.1.1-r1"?
Just curious to know...
KHM90 said:
Is it using "5.1.1-r2" source or "5.1.1-r1"?
Just curious to know...
Click to expand...
Click to collapse
as thread title says android-5.1.1-r1
Flashed.
It's soooo smooth. Thanks for this ROM!
Only noticed, that offline charging broken: phone totally hangs on "Sony".
And bootanimtion not fit screen.
Hi All,
Found one really interesting Delta-gapps package, where you get option to choose which add-on you wanna install
(If you prefer to have app on system partition)
[4.4.4 / 5.0.x / 5.1]
http://forum.xda-developers.com/showthread.php?p=58047099
Omg ! So fast and Smooth ! Maybe battery life is better ...
CWM/TWRP recoveries
For those, who don't know or don't remember, here are CWM/TWRP recovery images. Needs to be flashed only once to work.
Sometimes no audio when calling (works for a while after reboot). Also when calling, a blank screen appears from the phone activity making the transition ugly. Bootscreen is a bit large too
Nice rom , thx for your work.
Seems here come with great respond from other, and now i want try to move it too
AOSP I'm coming!!!
and this rom isn't big like other cm or fxp build, is only 212 mb.
Bonoboo said:
Flashed.
It's soooo smooth. Thanks for this ROM!
Only noticed, that offline charging broken: phone totally hangs on "Sony".
And bootanimtion not fit screen.
Click to expand...
Click to collapse
ah totally forgot about offline charging will see.
Ydraulikos said:
Sometimes no audio when calling (works for a while after reboot). Also when calling, a blank screen appears from the phone activity making the transition ugly. Bootscreen is a bit large too
Nice rom , thx for your work.
Click to expand...
Click to collapse
no such issue here. can more users confirm sometimes no audio when calling ?
problem on bootanimation that not fit on screen, on first boot is only black, and after a few second android logo is out.
but isn't critical problem so far
some wifi icon connection state problem, this like icon connection state isn't fit on wifi icon
and for mobile connection data is always show 3g although my connection is HSDPA + when i check on sim information
that's first report from me
Just noticed a problem with location. While location is on and GPS seems to work it says "No apps have requested location". For some reason apps can't access gps. I suspect this and the previous issue with no audio in call might be caused by gapps. Can anyone point me to a tested package of gapps? I used the one by cm12.1
Keyboard Force close ,But imidiately gone ,every time going in settings and pressing back button
Ydraulikos said:
Just noticed a problem with location. While location is on and GPS seems to work it says "No apps have requested location". For some reason apps can't access gps. I suspect this and the previous issue with no audio in call might be caused by gapps. Can anyone point me to a tested package of gapps? I used the one by cm12.1
Click to expand...
Click to collapse
I have also noticed it. Here maps can't locate me on any location setting.
Farsiris said:
Keyboard Force close ,But imidiately gone ,every time going in settings and pressing back button
Click to expand...
Click to collapse
Have you wiped cache/dalvik-cache ?
No force close here.
Ydraulikos said:
Just noticed a problem with location. While location is on and GPS seems to work it says "No apps have requested location". For some reason apps can't access gps. I suspect this and the previous issue with no audio in call might be caused by gapps. Can anyone point me to a tested package of gapps? I used the one by cm12.1
Click to expand...
Click to collapse
maybe you can try lp gapps base from @KHM90
here http://forum.xda-developers.com/showthread.php?p=58047099 this is lollipop gapps base file with add on
and if you want full gapps package you can try my gapps
http://forum.xda-developers.com/showpost.php?p=58373397&postcount=1
it's full gapps package
looks like gps hal not compiled. here is patch for gps hal https://www.mediafire.com/?xglqcu7b29dne10
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lolipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Device-specific source code:
device
kernel
vendor
Discussion thread -->
What's working:
so far i have tested:
RIL (Calls, SMS, Mobile Datal)
Display
Camera (photos, camcorder & panorama)
Audio and video
Wifi
Bluetooth
OpenGL rendering
Sensors (accelerometer,compass,light,proximity)
Sdcard
auto brightness
notification led
GPS
NFC
Wifi,Bluetooth and USB tethering
Not working/Tested:
offline charging somewhat working.
other everything is either untested or broken.
Note:
It's entirely possible that features not used by me (nor the people I've asked to test) are broken, but overall the device should be usable. You have been warned.
Because of art 1st boot take long time so don't panic and make post saying phone stuck on bootanim,
xperia m dual not support in cm12.0
This is BETA so don't treat this as stable version.
Download:
Nightly Builds: http://download.cyanogenmod.org/?device=nicki&type=nightly
Last nightly build mirror: Link
FXP CM12.0 Builds: http://fxpblog.co/cyanogenmod/cyanogenmod-12/
GAPPS: https://s.basketbuild.com/gapps
Note : CM-12.0 is only for 4.3 baseband. If you are on 4.1/4.2 baseband/firmware then Follow this instruction
Install instructions: (For 1st time only)
boot into fastboot (ignore if you coming any 4.4 rom)
flash boot.img from cm12.0 zip (ignore if you coming from any 4.4 rom)
boot into custom recovery
Wipe data and cache
Flash the CM12.0 and gapps zip
Reboot
Upgrading from earlier version of CyanogenMod 12.0:
Boot into Recovery
Flash CM12.0 zip
Reboot
Reporting bugs:
Before Reporting bugs make sure you
Read "note" section
Using stock kernel
Not installed any mods/tweaks - if you have installed mods like xposed you can't report bug
Not modified system files
Checked the posts below for a solution / fix
Read the last 10 pages of this thread for a post with a similar problem
Backup, reflash with a full wipe (do this if mods like xposed is installed) and check if the bug is still there
provide logcat,kmsg. if you reporting radio problem then provide radio log.
Screenshots:
Credits.
Fxp team and all other developer who is working on sony
Code Aurora Forum
CyanogenMod Team
Cybojenix
And Special Thanks to All Donors
XDA:DevDB Information
CyanogenMod 12.0 for Xperia M, ROM for the Sony Xperia M
Contributors
PecanCM
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 4.3 Firmware
Version Information
Status: Nightly
Created 2014-11-21
Last Updated 2015-05-28
Changelog
BETA 3 23-01-2015
Android 5.0.2 (LRX22G)
Fixed problem with YouTube vidoes
Fixes for other video problems
Fixed baseband version
Fixed no bootanimation on 1st boot
Working mass storage and charging only modes
Enabled FM
Updated widevine(DRM) blobs to lollipop
Updated adreno Blobs to LA.AF.1.1(lollipop)
Updated Kernel and Prima Wlan to LA.AF.1.1_rb1.8
Addressed more selinux denials
General cleanup and fixes
Updated cm source
BETA 2 19-12-2014
Updated to Android 5.0.1 (LRX22C)
Misc fixes
Enabled apps2sd
Disabled lpa
- incompatible with NuPlayer
Using cm recovery now
Updated Adreno blobs
Update kernel and prima wlan to LA.AF.1.1_rb1.7 branch
Updated cm source
BETA 1 28-11-2014
Fixed gsm issue after rebooting phone
Enabled multiColor battery led
Enabled 1080p decoding
Updated kernel and wifi driver to LA.AF.1.1_rb1.6
Updated cm source
ALPHA 1 21-11-2014
Initial release
FAQ
Q: The 'Developer and Performance options' from 'settings' are gone. Where are they?
A: Touch the 'Build number' seven times in 'about phone'. Then they will appear.
Q: I'm coming from 4.1 and now i can't view my internal sd data, Why ?
A: Go to Data/media now move your all internal sd data to folder named 0 Means under /data/media/0 then you can view your internal sd data
What about GApps? We can use 4.4.4 for now?
kosmita1993 said:
What about GApps? We can use 4.4.4 for now?
Click to expand...
Click to collapse
added gapps link in 1st post use that,
First bot is very very long, for me it was about 7-10 minutes. Wifi/Bt isn't working for me, NFC probably works because it can read my smarttags.
Great job!
BTW are you planning aosp build too?
omg this interface is so fancy I'm so exited XD
Time to edit Discussion Thread !
Awesome, will try this as soon as wifi gets fixed
Great work PecanCM
I flashed this rom .... 1st it took very time to boot but it booted.
everything was working good but wifi and bluetooth are not working. Hope it gets fixed by @PecanCM in the next build.
I cannot use it now but will use when wifi and blutooth gets fixed
GSM detection came on the 1st boot so there ws no need to reboot
For now this is all .. Hope it gets BETA in the next build !!!!
Thank You !!!
@PecanCM , can I downgrade the ROM after flashing CM12 (like , 5.0 to 4.4.4 ) ?? or (CM12 to CM11) ??
EliXer9 said:
@PecanCM , can I downgrade the ROM after flashing CM12 (like , 5.0 to 4.4.4 ) ?? or (CM12 to CM11) ??
Click to expand...
Click to collapse
Yes
Sent from my C1904 using Tapatalk
Is WiFi working ? (Because it's included in both the sections. i.e , working as well as not working) ?? And sorry if it's a stupid question
EliXer9 said:
Is WiFi working ? (Because it's included in both the sections. i.e , working as well as not working) ?? And sorry if it's a stupid question
Click to expand...
Click to collapse
No, not yet.
iddu.daragah said:
I flashed this rom .... 1st it took very time to boot but it booted.
everything was working good but wifi and bluetooth are not working. Hope it gets fixed by @PecanCM in the next build.
I cannot use it now but will use when wifi and blutooth gets fixed
GSM detection came on the 1st boot so there ws no need to reboot
For now this is all .. Hope it gets BETA in the next build !!!!
Thank You !!!
Click to expand...
Click to collapse
strange both works fine for me
give me logs and if you are on pc then run following and upload audit.log file.
Code:
adb root
adb shell
cat /data/audit/audit.log > /sdcard/audit.log
GSM, BT and GSM not working on my C2004
expecting for the next release! :good:
iks8 said:
First bot is very very long, for me it was about 7-10 minutes. Wifi/Bt isn't working for me, NFC probably works because it can read my smarttags.
Great job!
BTW are you planning aosp build too?
omg this interface is so fancy I'm so exited XD
Click to expand...
Click to collapse
iddu.daragah said:
I flashed this rom .... 1st it took very time to boot but it booted.
everything was working good but wifi and bluetooth are not working. Hope it gets fixed by @PecanCM in the next build.
I cannot use it now but will use when wifi and blutooth gets fixed
GSM detection came on the 1st boot so there ws no need to reboot
For now this is all .. Hope it gets BETA in the next build !!!!
Thank You !!!
Click to expand...
Click to collapse
flash zip from recovery or boot.img from this zip via fastboot https://www.mediafire.com/?45dz5xd8edh7ydn i forgot to commit a change and later removed by git stash this can be the reason otherwise i'm going to need logs.
and no i'm not planning aosp atleast not for few weeks
jhuy said:
GSM, BT and GSM not working on my C2004
expecting for the next release! :good:
Click to expand...
Click to collapse
read note section in 1st post.
PecanCM said:
flash zip from recovery or boot.img from this zip via fastboot https://www.mediafire.com/?45dz5xd8edh7ydn i forgot to commit a change and later removed git stash this can be the reason otherwise i'm going to need logs.
and no i'm not planning aosp atleast not for few weeks
read note section in 1st post.
Click to expand...
Click to collapse
Yes! Now it is working, your perdictions was correct. Thanks a lot!
Thanks wifi and bluetooth working now
after flashing new_boot image
jhuy said:
GSM, BT and GSM not working on my C2004
expecting for the next release! :good:
Click to expand...
Click to collapse
Try to get root, then type this in terminal emulator.
su setprop persist.radio.multisim.config dsds
Sent from my C2005 using XDA Free mobile app
Someone can mirror it? I am not able to download from mediafire, it just restart the download each time.
Sent from my C1904 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (MARSHMALLOW), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Display
Vibration
GPS
Sensors of All type
Google Apps
Bluetooth
Bluetooth tethering
All native apps
Ril
GPS
WiFi
Tethering wifi
Sdcard0/Sdcard1
Camera (photos, camcorder & panorama)
Audio playback
Audio recording
Video playback
OpenGL rendering
Hardware video decoding & encoding
USB-tethering
OMX
Mtp/ptp
Flashlight
@bartbart2003 There is a way to enable flashlight:
Code:
echo 1 > /sys/devices/platform/i2c-gpio.3/i2c-3/3-0030/brightness_uA
To disable flashlight:
Code:
echo 0 > /sys/devices/platform/i2c-gpio.3/i2c-3/3-0030/brightness_uA
Click to expand...
Click to collapse
Sound Record
NFC removed by default
Small edition CM13(RC1)
Gapps(Made by me)
Open Gapps
VeeKernel
Flashlight by @Paget96
Note : CM-13 is only for jellybean (v20) baseband. If you are on ics (v10) baseband flash v20 baseband
TWRP 3.0.2.0 Recovery
Wipe all partitions except sdcard!
Flash the cm-13-*-UNOFFICIAL-p700.zip
After flash Gapps(Long boot time)
Reboot
If you used GAPPS, after SetupWizard, go to: "Settings" > "Apps" > "Google Play Services" > "Permissions" > And select all options, this fix FC of ... hmm, Google Play Services? The Google may know this problem but it is like "**** you and your Custom ROM"
Screenshots:
XDA:DevDB Information
Cyanogemod 13, ROM for the LG Optimus L5
Contributors
Jonas Cardoso, Caio99BR, InsideMuz
Source Code: https://github.com/TeamVee/android_device_lge_p700/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Baseband V20
Based On: CyanogeMod 11
Version Information
Status: Stable
Current Stable Version: 2016-05-31
Stable Release Date: 2016-05-31
Created 2016-06-01
Last Updated 2016-09-25
RC1 - 30/05/16
Initial Release
Frequently asked questions
Q: Will this conflict with any mod I'm using?
A: As long as it doesn't have any entropy related stuff, its okay. Since the kernel already comes with an inbuilt entropy generator, it will conflict with the ones from mod, causing a poor, stuttered performance!
Q: Deep Sleep isnt working for me, Google Services causing wake-locks, what to do?
A: Go to settings, Privacy, Privacy Guard, All apps, long press Google Services, and deny/disable wake-locks! (Thanks to @Paget96 for the solution)
Q: Which version should I flash
A: Flash kernel with model number (P705), don't use (P700) or you may have problems with deep sleep
Q: Which frequency is the safest
A: The default frequency, 1008Hz, is the safest!
But, there's no harm in overclocking upto 1200MHz.
You MAY face some issues on 1200MHz-1300MHz, but 1150MHz is stable as 'rock'!
Q: WiFi doesnt work for me
A: Reflash ROM and Kernel
Q: How to logcat?
A: Here
A problem in ROM not reported?Make a logcat post here
Awesome!
Excellent!!!
Awsame
this works great thanks:good:
Thanks a lot.
Sent from my LG-P700 using Tapatalk
Just testing this ROM (mini) just this morning and....
Installation And the first boot was a little bit longer.
Gapps from mod was successfully installed but don't have Google account not showing.
Ril is working after v20 installed.
KB FC's.
So back to cm10 door.
Hope this will be improved.
Wait for other remarks to try again.
[emoji1]
Sent from my LG-P700 using Tapatalk
bugs problem
i have installed the ROM and GAPPS, but there are more bugs which closes application automatically,
and some times trying to install the gapps which u have givn is not installing properly, pls do check on it:good::fingers-crossed:
How to enable the flashlight with the code given in the OP's post?
Also I am not able to install gapps, it says insufficient storage in /system. I have tried wiping system and then installing the rom and then the gapps, still shows the same error. Tried OPs gapps in his post as well as from opengapps and other minimalistic gapps files, still the same error.
azsrockz said:
How to enable the flashlight with the code given in the OP's post?
Also I am not able to install gapps, it says insufficient storage in /system. I have tried wiping system and then installing the rom and then the gapps, still shows the same error. Tried OPs gapps in his post as well as from opengapps and other minimalistic gapps files, still the same error.
Click to expand...
Click to collapse
You have to type that code in Terminal. Go Settings>Developer options>Local Terminal to enable it.
Idk what to do about gapps too.
Sent from my LG-P700 using XDA-Developers mobile app
WinterR said:
You have to type that code in Terminal. Go Settings>Developer options>Local Terminal to enable it.
Idk what to do about gapps too.
Sent from my LG-P700 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you for your reply, i will try that.
But before that, even my RIL is not working. I am on v20 baseband as it used to work OP's CM11.
As for the system partition, only 51MB is left after installing the ROM, so i guess no way even the pico apps could install coz google play services alone is of 49MB.
azsrockz said:
Thank you for your reply, i will try that.
But before that, even my RIL is not working. I am on v20 baseband as it used to work OP's CM11.
As for the system partition, only 51MB is left after installing the ROM, so i guess no way even the pico apps could install coz google play services alone is of 49MB.
Click to expand...
Click to collapse
RIL is not working? It works for me.
That 49mb gapps package ia about 84mb when it is unpacked, that is a problem :/
Btw install VeeKernel4(if you didnt already) it will give you a little boost and option to Overclock.
Sent from my LG-P700 using XDA-Developers mobile app
WinterR said:
RIL is not working? It works for me.
That 49mb gapps package ia about 84mb when it is unpacked, that is a problem :/
Btw install VeeKernel4(if you didnt already) it will give you a little boost and option to Overclock.
Sent from my LG-P700 using XDA-Developers mobile app
Click to expand...
Click to collapse
Well it didnt seem to work for me. I have switched back to OP's CM11 and RIL works there.
I might try back this ROM when the system partition is fixed or the gapps are flashable properly.
Solution for problems with gapps http://jonascardoso.github.io/main-generic-device.html#main-dualboot-generic-device
I did it for you, have fun World Optimus "All the L5 and L7"
Jonas Cardoso said:
Solution for problems with gapps http://jonascardoso.github.io/main-generic-device.html#main-dualboot-generic-device
Click to expand...
Click to collapse
You mean to flash gapps as secondary ROM or use the "Patch Zip File" section?
Thanks
azsrockz said:
You mean to flash gapps as secondary ROM or use the "Patch Zip File" section?
Thanks
Click to expand...
Click to collapse
Use the CM13 as a secondary ROM partition on that date you will have space for GAPPS
Has anyone tried this rom on P705 ye? I would love the feedback thanks!
recovery L7
I have blocked the recovery and gives me the error : Secure booting Error!
Cause : boot VERIFY certification
How do I fix ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Status : ALPHA 5
This version is mainly for testers but anybody can flash it, since there is no more critical issues :victory:
This build is userdebug flavor. ADB and ROOT are disabled by default.
Installation instructions
First of all, update your Mate to EMUI 4.1 (that has the good kernel version)
Like always: BACKUP, BACKUP BACKUP !
Wipe every partitions (except your SD and your internal storage) See below.
You can flash GApps (see the frequently asked questions below).
Enjoy.
- NXT-AL10, NXT-L29 and NXT-L09 reported as booting
- Xposed reported as working
- Second SIM reported as working (NXT-L29)
Important note : L-09 variant is UNSTABLE for now.
Working
- Since Alpha 1
Partial and temporary GApps implementation
Launchers (Pixel/Google Now)
Themes (include animated)
- Since Alpha 2
RIL
Audio
Microphone
WiFi
Bluetooth
Security (Pin/Password/Pattern..)
GPS over data
Google Apps (include widgets and theme )
HiSuite full compatibility
- Since Alpha 3
SD Card
Tethering (WIFI + BT)
Offline charge
USB Access (MTP/PTP + MIDI input)
OTA Updates (by the built-in CM Updater)
Enhanced boot time (+/- 1min)
- Since Alpha 4
LCD Backlight adjustments
Notification Led
Enhanced boot caching
USB Tethering
Fix sensors
Fix ambiant display
Fix Sleep Of Death (thanks to XePeleato)
Fix FLP (location)
Fix GPS
- Since Alpha 5
RIL Signal
Bluetooth (now considered as stable)
Camera (Both, picture only)
Lineage skin/rebrand
Not Working
Camera (video mode)
Native cast
Fingerprint
Fast Charge
NFC
FM Radio
Known issues:
GPS module(fully working, available in the next release)
Another (ghost) SD Card is recognized and is incompatible with CM -> just ignore it for now. This entry will disappear with the next (OTA) update.
RIL working irregularly on AL-10 (unconfirmed) and L-09 devices
Offline charge not working (fixed, available in the next release)
You prefer to wait for a fully working ROM
You can follow the porting status here : https://github.com/PaulFasola/android_device_huawei_next/projects/1
Downloads
Current release, Alpha 5
Click here
Do a full wipe before installing this update or you could try the (risky) migration tool
Previous release, Alpha 4
Click here
Archives
Click here
Source Code
https://github.com/PaulFasola/android_device_huawei_next
You'll find the kernel and the vendor repos as well (check the readme)
Donators
android09
danywalkert
Azti Iluna
basimzanaty
drairoh
My dear tester Kingzak34
Many thanks to you guys !
Credits
* Nexolight for the useful advises
* Meticulus for the glitchy screen issue!
* Surdu_perdu's work for some ramdisk issues!
* _Ekko (freenode) for his help on the rild issues (symbols, symbols symbols...) and rild proper init
XDA:DevDB Information
[ROM][6.0.1][UNOFFICIAL] Lineage OS 13 Port, ROM for the Huawei Mate 8
Contributors
_skypol0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: No Longer Updated
Created 2016-12-05
Last Updated 2017-09-15
Reserved
Changelogs
Alpha 3.1 - OTA only
LCD Backlight (manual update, temporary disable adaptive brightness and sensors are still off-line)
Leds (charge/notification etc..)
Drastically reduce battery consumption
Better boot caching for apps optimization
Bases for enabling the sensors soon
Fix in-game latency for complex animations (like 3D transitions)
Alpha 5.1 - (Full)OTA / download
Link: click here
Fully fix the GPS (satellites acquisition, bad wakelocks...)
Fix offline charge (animation) and adjust the settings for a faster charge (rapid charge still In the to-do list).
Have the latest LineageOS 13 core changes
Downloading now, I will test soon. Thanks for your work
UPDATE: I had to remove assert line in your updater-script, as my ro.build.product was Mate8 not next. After install i am currently stuck on the boot loader "Your device is booting now"
UPDATE 2: It worked!! Seemed like an issue on my end, i had to update to emui 4.1 before I was able to get the ROM to boot. Everything seems great so far. The only issue I faced was with the screen artifacting, and of course the issues you already listed. Great work :good:
FREQUENTLY ASKED QUESTIONS
I come from EMUI 4.1, can I flash this ROM ?
Yes, but you will need to full wipe and follow the instructions in OP
I'm on EMUI 5.X or 4.0, can I flash this ROM ?
You should roll back to EMUI 4.1 then follow OP instructions
My phone is asking for a password on boot
The master key of the old EMUI is not known and that's why we had to wipe userdata (this remove encryption).
So, that means that your Data partition is not wiped, and you have to wipe it !
Flash the Cyanogenmod recovery (built with this ROM, located in the same folder) and do a full factory reset, this work everytime.
Once done, reboot and flash this custom TWRP that handle non-encrypted userdata. You will be able to open the SD Card, flash whatever you want and restore your backup.
NB : If you flash back the stock ROM, this last will re-encrypt /data and everything will work as always.
I've waited for 10 minutes and the Cyanogen boot animation is still here
Something is wrong and prevent CM to complete the boot sequence. This is an issue to report (see below).
This ROM does not contain GApps, what should I take ?
You can find GApps package on OpenGapps
You'll need to take for ARM64 and Android 6.0 and then choose the package you want.
Tested so far : Full, Stock, Nano
I've found an issue
First of all, thanks for helping @_skypol0 !
> Open a ticket here <
Check if there is not a similar issue before posting
Fill the issue (Your device infos (kernel version, last EMUI update version etc.) , What is the problem ?, how can we reproduce it ? etc. Please put as many information as possible)
Share a paste/haste/ghost/...bin of your logcat and dmesg
Wont use it but thanks for developing it (i dont like roms based on clean android). Might be a huge step in futrue development on Mate family.
Awesome!!
Man, you've convinced me not to sell my mate 8 anymore, It's great potential. I'm looking forward for the beta version of this!
Was going to sell my mate 8 also. But now will test once basic functions are ok.
khanem said:
Was going to sell my mate 8 also. But now will test once basic functions are ok.
Click to expand...
Click to collapse
RIL an audio should be fixed with the next release later this week
I'm excited for Alpha 2
UnchartedRd said:
Downloading now, I will test soon. Thanks for your work
UPDATE: I had to remove assert line in your updater-script, as my ro.build.product was Mate8 not next. After install i am currently stuck on the boot loader "Your device is booting now"
UPDATE 2: It worked!! Seemed like an issue on my end, i had to update to emui 4.1 before I was able to get the ROM to boot. Everything seems great so far. The only issue I faced was with the screen artifacting, and of course the issues you already listed. Great work :good:
Click to expand...
Click to collapse
Oh, yeah, thanks for pointing it out ! I have built CM-13 with the 4.1's kernel and so this last can't work with lower versions I edit the thread.
(for any other problem, open an issue on Github, I can miss infos here!)
_skypol0 said:
Oh, yeah, thanks for pointing it out ! I have built CM-13 with the 4.1's kernel and so this last can't work with lower versions I edit the thread.
(for any other problem, open an issue on Github, I can miss infos here!)
Click to expand...
Click to collapse
No problem, I'll post on github if I find anything else
You mean B320?
Thanks for your effort friend, I'll definitely be glad to test it once it gets a bit more stable.
Oh my god... it's really happening...
Once SD support works, I'll glady test this on my NXT-L09.
THANKS DUDE! SWEET! Hope stable rom will get here soon! but wouldt be better starting with cm14? just saying!!
albertwesquer said:
THANKS DUDE! SWEET! Hope stable rom will get here soon! but wouldt be better starting with cm14? just saying!!
Click to expand...
Click to collapse
Huawei hasn't released a stable build of nougat yet, its only been beta builds. Once Huawei releases nougat for M8, he can work on it.
And on the other side Cm14 is far from stable
Tapatalké depuis mon MEGA Mate 8 !
well i didnt know we had to have nougat in our mate 8 in order to have cm14, in that case cm13 should be ready since 6.0 have quite some time in our device! SO THERE'S HOPE!
Amazing I cant beileve im really seeing it
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh atyou.
*/
Hi everyone, here is my port of Oreo on OnePlus 5. Source is based on AOSP android-8.0.0_r3 (r9 since 20170916, r15 for 20171008), as it's for Pixel. Device repo, kernel and vendor etc are available at the end of the post.
And the same note as before: this ROM is highly experimental, and only meant for the brave ones. I may not update this work regularly.
Hardware features:
Things went more smoothly than before.Majority of hardware features are working, including mobile network, WiFi, Bluetooth (file transfer, network, audio etc), GPS, camera / camcorder, fingerprint, sensors, HW-based encryption etc.
There are some minor issues regarding HW:
1. Virtual keys and hardware keys are enabled altogether. You can disable hardware keys at /proc/touchpanel/key_disable and /sys/module/fpc1020_tee/parameters/ignor_home_for_ESD . If you do want the virtual keys to hide, read first several pages of replies and there are some solutions.
2. Slider is not working, but it produces key event. There are lots of tools that can be used to customize actions for key events, and examples can be found in the first several pages of replies as well.
3. No offscreen gestures.
4. No option for color profile switching (default, sRGB, DCI-P3). You can switch that manually at /sys/class/graphics/fb0/color_profile
Known bugs:
1. Permissive SELinux, and init allows services without a SELinux domain to start
2. Behavior of camera is not consistent - it works on my phone, but it may crash yours. If your phone reboots into EDL/9008 mode after flashing this ROM, use recovery or fastboot to flash back to other ROMs IMMEDIATELY!
3. Sometimes the system does not show charging status (no flash sign in battery icon, but LED lights up as usual), while the battery is being charged just fine.
4. No UI shown when alarm clock goes off. This is an AOSP bug (missing NotificationChannel parameters). Use Google Clock from Play Store instead.
5. VoLTE is broken. Maybe we need to wait for an official release for updated blobs.
And as you may have already known, AOSP does not include a fully functional browser nor a file manager. An `adb install` may be needed after flashing.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
Make backups! Make backups! Make backups!
20171008: https://drive.google.com/open?id=0BwkmhbR5VHpARHYwUE1BSGkxbTQ
20170924: https://drive.google.com/open?id=0BwkmhbR5VHpAU2lUVEVQcDRuaDQ
20170916: https://drive.google.com/open?id=0BwkmhbR5VHpAbkpMWFU1R1VLNDA
20170910: https://drive.google.com/open?id=0BwkmhbR5VHpAcGsyZ3hYWkZZcFU
20170907: https://drive.google.com/open?id=0BwkmhbR5VHpAMEVQX3h0UG1pUHM
You will lose Magisk and GAPPS after upgrading since boot and system partitions are overwritte. Better flash GAPPS right after the firmware, otherwise apps depend on GAPPS will FC even if GAPPS are re-installed.
This is NOT a flashable zip. Use fastboot to flash:
Code:
fastboot erase boot
fastboot flash boot boot.img
fastboot flash system system.img
And wipe data before usage.
NOTE: This ROM requires encrypted data partition. If your data partition is not encrypted, format it. Moreover, OxygenOS 4.5.10 4.5.12 firmwares are required.
Changelog:
20171008
Since proper development on Oreo has started, this ROM has served its purpose as an experimental (or first-taste-only) ROM, and thus will not receive any updates anymore.
Updated blobs to OxygenOS 4.5.12 (baseband version was not changed, but better use the new firmware bundled with 4.5.12)
Updated to android-8.0.0_r15
Switched to new kernel source used by MoKee (may solve some WiFi issue, and possibly some others)
Some minor cosmetic changes
No new patches applied, the 0924 archive would be fine.
20170924
Fixed voice translation in Google Translate (maybe other apps as well)
Add a power HAL and double tap to wake is available in settings now (wondering if it actually works)
Use RenderScript driver from OnePlus 3 Oreo beta. Stock one is too old for Oreo, thus it was not loading at all.
Included navigation bar fix from this post
(Also tried new kernel used in MoKee and Lineage OS, but it still causes stalls when remounting so I switched back to the old kernel)
20170916
Bluetooth address should be correct
Fixed broken compress_offload feature (some music player (or ringtones) rely on this)
Make DASH chargers recognized as standard AC charger with fast charging support
Update to android-8.0.0_r9
20170910
Fixed Bluetooth audio. Now LDAC, AAC and SBC all work. If you want aptX / HD, find libaptX{,HD}_encoder.so elsewhere and push them to the phone.
Fixed AOSP keyboard crash when switching to symbol / numbers panel: https://android-review.googlesource.com/#/c/platform/packages/inputmethods/LatinIME/+/469478/
20170910
Initial build
Sources:
Kernel: https://github.com/updateing/android_kernel_oneplus_msm8998 (aosp-o-new branch)
Device: https://github.com/updateing/android_device_oneplus_cheeseburger (aosp-o branch)
Vendor: https://github.com/updateing/android_vendor_oneplus_cheeseburger (aosp-o branch)
In order to build kernel with AOSP, you need build/core/tasks/{kernel,dt}.mk from other ROMs build system. And external/{libnfnetlink,libnetfilter_conntrack} needs to be forwarded to AOSP master.
Source patches are attached to this post.
Credits:
MoKee/@XiNGRZ for this awesome kernel
Qualcomm for the great SoC
And Google for the OS
Thank you all!
Nice, will give it a go later, I presume there shouldn't be a problem with TWRP and going back to our present rom?
You also didn't post any gapps link, would these work ok?
http://www.cyanogenmods.org/forums/topic/gapps-lineageos-15-android-oreo-roms/
You're a brave man @djsubterrain
Does this work as a secondary ROM on multirom?
ZachChampion2020 said:
Does this work as a secondary ROM on multirom?
Click to expand...
Click to collapse
No..As it says its not a flashable zip
ZachChampion2020 said:
Does this work as a secondary ROM on multirom?
Click to expand...
Click to collapse
Judging by the way you need to flash this it's categorically NO
ZachChampion2020 said:
Does this work as a secondary ROM on multirom?
Click to expand...
Click to collapse
It's labelled "EXPERIMENTAL" so it's highly unlikely, you really think that would be a priority to get it working with multiboot when the rom isn't even fully working?
niceeeeee
Nice to see some OREO love for our device. Thanks Developer for your hard work.
djsubterrain said:
Nice, will give it a go later, I presume there shouldn't be a problem with TWRP and going back to our present rom?
You also didn't post any gapps link, would these work ok?
http://www.cyanogenmods.org/forums/topic/gapps-lineageos-15-android-oreo-roms/
Click to expand...
Click to collapse
TWRP should work fine. Personally I'm using TWRP 3.1.1, official build, and haven't noticed any issue.
There should not be any issue when going back to 7.x ROMs (though I have not tried myself), but as wiping data is always involved when changing ROMs, do make a backup of everything including internal storage!
I have not tried any unoffical build of Gapps, and the only official build available now is DeltaGapps. It doesn't work OOB however, I need to extract some libs from APKs to get it to work.
1st to release N for bacon, O for cheeseburger.
Good job bro.
Good!!
Guo Lai Yang Wang Dalao!
Good job bro~
Sent from China fanboy~
missing on u in bacon family.. like u provided Nougat rom for oneplus 1..
*crais for posting OT* @updateing ,by any chance,are you working on oreo for bacon as well? Your work for Nougat on bacon is highly appreciated.
Mr.Ak said:
*crais for posting OT* @updateing ,by any chance,are you working on oreo for bacon as well? Your work for Nougat on bacon is highly appreciated.
Click to expand...
Click to collapse
Bacon already has an Oreo port.
djsubterrain said:
Bacon already has an Oreo port.
Click to expand...
Click to collapse
Ikr,but hopefully he'll be able to get camera working on oreo for bacon.
First O rom. Wow ?
Snapdragon815 said:
1st to release N for bacon, O for cheeseburger.
Good job bro.
Click to expand...
Click to collapse
Mmmm.... I love some bacon on my cheeseburger... Typed on the 1+1 while my 1+5 is charging... Keep up the good work!
Thanks Dev. Oreo love
crDroid for Sony Xperia XZ1 Compact
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlock Bootloader
Please if you have Locked Bootloader you may check this http://developer.sonymobile.com/unlockbootloader/
Code:
WORKING
- RIL
- VoLTE
- Mic
- Sound (Speaker and Headset)
- LED
- Thermal Manager
- Audio and Video Decoders/Encoders
- Camera
Code:
BUGS
- Not finding
- In this ROM tooo many settings, some may not working and this is normal ;)
- Post in this thread
Code:
HOW-TO INSTALL
- You need have stock ROM 47.2.A.11.228
- Download ROM zip
- Copy to your phone
- Enter to custom recovery and make wipe system, wipe data
- Install ROM & Gapps & Magisk
- Turn off your phone & then on
- First time phone restart itself this is normal
Code:
ADD. INFO
- If you want right bootanimation then delete bootanimation.zip on path /oem/media/
- Sim detect ~30 sec, if you choose 3G network in settings, sim detected without any delay
- Stock camera (not Sony) after first lunch write that you need insert SD Card, just go to application settings and re-switch permission "storage"
Download
HERE
Download crDroid_10
HERE
And don't forget buy me a juice
XDA:DevDB Information
crDroid, ROM for the Sony Xperia XZ1 Compact
Contributors
russel5, @derf elot @modpunk
Source Code: https://github.com/whatawurst/android_device_sony_lilac
ROM OS Version: 11
ROM Kernel: Linux 4.x
ROM Firmware Required: 47.2.A.11.228
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2021-01
Created 2021-01-28
Last Updated 2021-01-28
v1
- initial release
Hello, thank you so much, I'm interested in that many features :good:.
I'm After flashing LOS. Can you help me - how can I get flashable official firmware before installing your custom roms?
Flash all firmware 11.228 via newflasher, start up your phone. When you see first setup window you can turnoff your phone. Then flash custom recovery and see how to install in this OP
russel5 said:
Flash all firmware 11.228 via newflasher, start up your phone. When you see first setup window you can turnoff your phone. Then flash custom recovery and see how to install in this OP
Click to expand...
Click to collapse
Thank You, I'll do it asap
Hello, unfortunately i experienced bug after flashing aex, crDroid and after all them LOS in twrp. Previously I had downloaded stock, deleted all ta files create partition folder and then flashed stock firmware by newflasher (dedicated to my country). That was fine, also fastboot reboot bootloader and fastboot boot twrp was ok. I wiped indicated in instruction partitions/format them, and after booting to system. I was uneable to use it. I'll attach pictures. I could only one think. Use power button to see power options and navbar (in crproblem.jpg file you can see superimposed navbars... strange). (after i firstly saw problem i wiped them all and tried to reinstall ROM with same result new thing is not working LOS) Maybe I should choose other firmware from newflasher (maybe uniwersal, working in all country?). Now I'm forced to use stock, because of custom ROMs doesn't work.
While I was flashing stock, newflasher asked me "if I want to flash persist partition" I chose n
I really need help, (stock rom sucks and I don't want to use GApps because of privacy issues.)
if you have same problems on all custom roms than you do something wrong.
try flash stock rom and start your phone, make a first settings and other thing.
russel5 said:
if you have same problems on all custom roms than you do something wrong.
try flash stock rom and start your phone, make a first settings and other thing.
Click to expand...
Click to collapse
Thank you, I succefully installed taht wonderful ROM . I think it'd be good to mention in a main post that before you install zip yoru device must be fully configured (first configuration is enough, not needed to look in Google account) and have set pattern (it worked for me) without it did not work, you can see only black screen like in a previous post.
Maybe it took part, maybe not but after first configuration I copied twrp.img to SD card and booted twrp from fastboot "fastboot reboot bootloader" then "fastboot boot path_to_img_file/twrp.img" after boot I installed twrp by install ==> install ==> install image ==> twrp.img as a recovery only then I started with next steps
Thank you for supporting me with device problems and answering noob questions I'll test that ROM and give feedback if I have time.
russel5 said:
crDroid for Sony Xperia XZ1 Compact
Click to expand...
Click to collapse
There is no selinux support
This is TREBLE project, selinux only in permissive mode
Love, love, loving this ROM! The level of customization is awesome and it is such a beautiful display. I haven't been able to test every setting but I will continue to tinker with it. Thank you so much for the hard work!
P.S. - Sent you some juice money
One thing I noticed, I can no longer send mms without having mobile data on. I was always able to send mms without it on stock fw, cricket/att network but now it has to be on to send and receive pictures and other mms. Is there a setting I'm missing?
Thanks
First, big thanks for juice.
Today I will update rom, seems VoLTE has been fixed.
About your problem, don't know, mms is so old feature never used it. Check your apn or try reset your internet option.
Thread updated, see post #2
Still testing things but I used my phone for work today and really liked the responsiveness of this ROM. I use Google Maps a lot and there was always some lag on the stock fw but none that I could notice on the crDroid. This ROM boots quick and loads resources quick.
I flashed update after work and it seems more stable. I had one minor freeze on v1 and home screen would crash when I was trying to set it up but I also have nova launcher and that might have conflicted. V2 has had no crashes and after setting up the home screen, I just might ditch nova for a bit. Again, I love this ROM.
As far as the MMS goes, I can't find an option to download new internet settings like stock had. I reset apn but still can't send mms without data. It's not a deal breaker but now I'm super curious. Could it be related to the RIL? I honestly don't know, I'm just learning as I go but if that's the case is there anyway to restore the stock RIL? Like replacing the telephony-common.jar?
Thanks again for all your hard work
I'm interested to get the best sound on our device (I created another thread about that).
Here I just want to confirm that rom works with dolby digital plus from here, after freeze audiofx: https://forum.xda-developers.com/android/software/mm-p-dolby-digital-plus-arise-20181115-t3868192
Next is xperia keyboard, I flashed it successfully (but remember to mount system in twrp before install process). Note: After updating rom it is always disappears (it's mentioned in its thread)
Here is it: https://forum.xda-developers.com/android/apps-games/sony-z3-keyboard-lollipop-update-t3056448
Hello,
I want to report that "long press home" doesn't work when swipe-up gestures are enabled
I tried to upload video where I tried to use it but xda app treats mp4 file as invalid.
VoLTE don't work for me.
ROM is very fast and very customized but sometimes WhatsApp and others apps don't show correctly the notifications.
How to install new fonts？？
JanoGT said:
VoLTE don't work for me.
ROM is very fast and very customized but sometimes WhatsApp and others apps don't show correctly the notifications.
Click to expand...
Click to collapse
Hi, on your stock rom volte works?
If yes, share here your oem.sin from stock rom, thanks.