Develop Bugs

[Q] help unlock bootloader

Hello,
I have a problem ...
for days trying to unlock the bootloader my arc s without results ..
I have the Android version 4.0.3 and build 4.1.a.0.562 .. I have root permissions
following the official sony , the phone is recognized in cmd with values ​​of 0.3, but when I insert the key gives me error ..
the bootloader unlocked: Unlock Bootloader authorized says yes
I have also tried with fastboot down (at the end says successful) but the bootloader is locked.
Do you know help me please?
Forgive my poor English but I use google translate from Italian to English: (
Thanks in advance Giada

mor87 said:
I have also tried with fastboot down (at the end says successful) but the bootloader is locked.
Click to expand...
Click to collapse
Does the blue led light up when you connect the Phone in fastboot mode?

XperienceD said:
Does the blue led light up when you connect the Phone in fastboot mode?
Click to expand...
Click to collapse
Hello,
it is the light blue mode flastboot
The program fastboot June but warns that the operation is under development

mor87 said:
Hello,
it is the light blue mode flastboot
The program fastboot June but warns that the operation is under development
Click to expand...
Click to collapse
Then your boot loader is unlocked. Post a screen shot of the cmd window.

XperienceD said:
Then your boot loader is unlocked. Post a screen shot of the cmd window.
Click to expand...
Click to collapse
here it is

mor87 said:
here it is
Click to expand...
Click to collapse
If the blue led lights up then it's pointless trying to unlock it again. Flash whatever it is you unlocked your boot loader for and report back. And in future make your screen shots bigger.

XperienceD said:
If the blue led lights up then it's pointless trying to unlock it again. Flash whatever it is you unlocked your boot loader for and report back. And in future make your screen shots bigger.
Click to expand...
Click to collapse
Sorry for the photo : (
Do you think I can install MIUI?
the bootloader is unlocked?

mor87 said:
Sorry for the photo : (
Do you think I can install MIUI?
the bootloader is unlocked?
Click to expand...
Click to collapse
Try it and see.

mor87 said:
Sorry for the photo : (
Do you think I can install MIUI?
the bootloader is unlocked?
Click to expand...
Click to collapse
YES ! definitely ! I had done these for fun..
I had tried this ..
http://forum.xda-developers.com/showthread.php?t=1851262
and also the one from China (if you can read Chinese !)

XperienceD said:
Try it and see.
Click to expand...
Click to collapse
Hello ..
I tried to install a kernel ..
When I try to get into recovery does not fit ..
pressing the volume - enter into Safe Mode ..
as I thought the bootloader is not unlocked ..
What can I do?
Thanks in advance

mor87 said:
Hello ..
I tried to install a kernel ..
When I try to get into recovery does not fit ..
Click to expand...
Click to collapse
You're doing it wrong!
You hold the menu key!

I hold to unlock the bootloader menu ..
Right at the bottom.
but can not, as I have shown with the photo.
if I install the kernel and go into recovery with volume down button, nothing happens.
if I type in the phone * # * # 7378423 # * # *, under Bootloader unlock allowed says yes
P.s. regarding the video do the same passage ..

To unlock bootloader I did this:
First, you should confirm that it is possible to unlock the boot loader of your phone by checking the service menu. In your phone, open the dialler and enter *#*#7378423#*#* to access the service menu.
In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
On your computer, click Continue at the bottom of this page to start the unlock boot loader process.
Read through the information in the pop up window and click Yes, I’m sure, if you are still confident you want to unlock the boot loader.
Read through and accept the legal terms. Click I Accept.
Enter your name, email address and the first 14 digits (remove the last digit) of your phone’s IMEI number. Click Submit. You can view the IMEI number by entering *#06# on your phone.
The unlock boot loader key is displayed. Write it down and save it for later use.
Download and install the latest Android SDK from developer.android.com.
Download and unzip this file. This is the standard android_winusb.inf-file, with a few lines of code added to enable Fastboot to support Sony and Sony Ericsson devices. Make sure you are running Google USB Driver package revision 4 or higher in your Android SDK. You can see current Google USB Driver package revision in the SDK Manager.
Place the unzipped file in the usb_driver folder, located in the Android SDK > extras > google folder on your computer. Accept to replace the old android_winusb.inf-file with the new file. If you can't find the usb_driver folder, please install the Google USB Driver Packager using the Android SDK manager.
Turn off your phone.
On your phone, push and hold the unlock button* at the same time as you connect the phone to the computer with a USB-cable. The unlock button may differ between different phone models. See the note in the bottom of this page for more information on what button use on your phone.
On your computer, you will be asked for drivers. Point to the usb_driver folder where you placed the android_winusb.inf-file, and select the Android Boot loader Interface-file.
Open a command window and go to the tools folder within the Android SDK folder.
Enter fastboot.exe -i 0x0fce getvar version, and verify that you get a response back (for example "0.3"). This means your phone is connected properly.
Warning! If you perform this step, you will unlock the boot loader. This may void your warranty and/or any warranty from your operator. If you still want to unlock the boot loader of your phone, enter fastboot.exe -i 0x0fce oem unlock 0xKEY, where KEY is the unlock boot loader key you got in the beginning of this instruction. The boot loader should now be successfully unlocked.
per cambiare kernel ho fatto questo :
Download the latest version of the rom.
Copy the zip file downloaded to the phone's SD card.
Open the downloaded zip file from step 1 on your computer and extract the boot.img file from inside the zip to the tools folder in your ADB on your computer.
Boot into fastboot mode on your phone. To do this, turn off the phone. Then, while holding the Menu button, connect the USB cable to the phone.
Now flash the boot.img (this is the kernel that are required to update the ROM) with fastboot by typing the following command:
fastboot flash boot boot.img
* or if the previous command does not work, then enter the following command:
fastboot-i 0x0fce flash boot boot.img
After the flash is complete, disconnect the phone from the computer.
Now, start the recovery ClockworkMod on your phone. To do this, turn on the phone, then wait for the blue LED to illuminate. Once you see the blue LED lit, enter the return key on the phone to enter CWM. In recovery, use the volume keys to move up and down and the home button to select the options.
I also followed the video you posted ..
but nothing to do ..
could you advise me ?

Help I bricked my Oneplus 3

Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))

have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.

bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)

Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs

bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?

Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"

Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?

ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol

bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?

gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs

Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))

Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?

Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..

jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english

Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.

can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!

How to wipe android partitons while NO access to Fastboot? PLZ help

Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill

TowChill said:
Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill
Click to expand...
Click to collapse
Here you can find a recovery guide:
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
I'd recommend methode 2, because it seems more east to do.
Good luck!

TowChill said:
Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill
Click to expand...
Click to collapse
If you are getting two boot screens, please confirm if this is what you see in your first boot screen:
some text which goes like "Your device cannot be trusted etc etc. fastboot oem lock something something"
If yes, press the volume buttons at this screen, which will take you to an "Options menu"
This will have options to power off, restart, recovery, fastboot, back to previous page.
use volume down buttons to move selection to fastboot and press power button to select fastboot.
This will take you to bootloader.
Alternatively:
Is the device getting identified by your computer when connected?
If yes, and if you have adb tools installed, try this command, after connecting to computer and selecting usb configuration as transfer files
adb devices
The result of this should show your device
then type:
adb reboot bootloader
This should take you to your bootloader screen.

pvramk said:
If you are getting two boot screens, please confirm if this is what you see in your first boot screen:
some text which goes like "Your device cannot be trusted etc etc. fastboot oem lock something something"
If yes, press the volume buttons at this screen, which will take you to an "Options menu"
This will have options to power off, restart, recovery, fastboot, back to previous page.
use volume down buttons to move selection to fastboot and press power button to select fastboot.
This will take you to bootloader.
Alternatively:
Is the device getting identified by your computer when connected?
If yes, and if you have adb tools installed, try this command, after connecting to computer and selecting usb configuration as transfer files
adb devices
The result of this should show your device
then type:
adb reboot bootloader
This should take you to your bootloader screen.
Click to expand...
Click to collapse
Thank you for your replay.
I have done all of this and i do understand how this works.
I have adb drivers installed, my computer does reconizes my phone and everything works even the reboot to bootloader via CMD. (adb devices, it shows, etc)
When my phone then tries to access the bootloader, it will show those messeges " this devices cant be trusted etc etc." afther 5 seconds again I see the the android logo (with a few lines of static on the bottom) (( that clearly is not right )) but it will show me again the same message " this devices cant be trusted etc etc" ... then it will just show me the battery icon and power precentage (this if I choose to boot to bootloader) or else it starts normally..
Clearly the flashing of CM failed. And with a sideload to install OxygenOS I can use it.. But it does prevents me from accessing the fastboot mode..
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.

TowChill said:
Thank you for your replay.
I have done all of this and i do understand how this works.
............
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.
Click to expand...
Click to collapse
well if you are rooted you can try using an app called flashify or flashfire to install twrp

pvramk said:
well if you are rooted you can try using an app called flashify or flashfire to install twrp
Click to expand...
Click to collapse
Thanks! Unfortunatly my phone isn't rooted anymore ..
I'm screwed right?

TowChill said:
Thanks! Unfortunatly my phone isn't rooted anymore ..
I'm screwed right?
Click to expand...
Click to collapse
When the display shows the battery % check if fastboot devices shows your device?
If not I'm sorry, I would not be of any more help to you my friend.
Hope someone more knowledgeable comes along and clears your problem....

TowChill said:
Thank you for your replay.
I have done all of this and i do understand how this works.
I have adb drivers installed, my computer does reconizes my phone and everything works even the reboot to bootloader via CMD. (adb devices, it shows, etc)
When my phone then tries to access the bootloader, it will show those messeges " this devices cant be trusted etc etc." afther 5 seconds again I see the the android logo (with a few lines of static on the bottom) (( that clearly is not right )) but it will show me again the same message " this devices cant be trusted etc etc" ... then it will just show me the battery icon and power precentage (this if I choose to boot to bootloader) or else it starts normally..
Clearly the flashing of CM failed. And with a sideload to install OxygenOS I can use it.. But it does prevents me from accessing the fastboot mode..
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.
Click to expand...
Click to collapse
If nothing works, try method 2 from the Hard Brick guide from Naman Bhalla.

Soft bricked OPO3, Fastboot with no recovery

Hi guys,
Rooted Oneplus 3 is soft bricked. Please help me!!! :crying:
:crying:Quick desription: Fastboot formatted it. My PC detects it.
Tried to Fastboot flash latest TWRP ("twrp-3.0.2-0-oneplus3.img") via CMD Prompt.
After that I get a message saying that the processed was "finished" (within 0.802s!).
Now I reboot+volume down and bootloop continues. Phone starts, I see the normal warnings I used to get after rooting it. Then I see the Oneplus logo for a fraction of a second and then it boots again and the process repeats itself.
I think it may be worth mentioning that the reason all this happened is an encryption problem that occurred while I was flashing a rom update with TWRP: After the flashing finished, got an error saying "unable to mount storage". Wiped cache+dalvik and then restarted. Got a black screen that did not display any signs of life after several minutes. Then turned it off and on by long press on the power button. Then I got an error saying that the encyption process was disrupted and that I have to wipe my phone (strange given that I did not select any encryption button in TWRP). Anyhow, then I fastboot formatted the phone and that's it.
Thank so much for anyone who can help!!!

fastboot flash recovery recovery.img (I recommend blu_spark's TWRP) reboot to recovery, if it doesn't work, try:
fastboot boot recovery recovery.img
See if you boot to recovery and then try flashing a custom ROM.

Hi Fobos, thanks for responding quickly.
I tried using fastboot boot command (with twrp-3.0.2-0-oneplus3.img). No luck with that.
Also, didn't find a downloadable blu_spark *.img version for twrp recovery. would you be so kind to add a link?
Thank you.

Now I think it's hard bricked ( Help!!!
Phone just stopped responding. Mostly doesn't respond. Occasionaly turns on for a nano second, flashes the +1 logo and turns off. Most of the time it doesnt even do that any more when I press (long / short press) the power button!
Somebody help, please!!

ppppp44 said:
Phone just stopped responding. Mostly doesn't respond. Occasionaly turns on for a nano second, flashes the +1 logo and turns off. Most of the time it doesnt even do that any more when I press (long / short press) the power button!
Somebody help, please!!
Click to expand...
Click to collapse
Keep calm and breath in. I was in the same situation.
Take a breath.
So, you have 2 ways depending on what you want. You can either go back to full stock with a flashing tool or you can install a custom recovery and then installing a custom rom (or stock one). I suggest the flashing tool.
Just follow the steps here: https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306 and if you have any question come back here and ask them.
Good luck.

Recoveryhttps://forum.xda-developers.com/devdb/project/dl/?id=24575
First format recovery by using command
fastboot format recovery
then flash recovery using
fastboot flash recovery "recovery.img"

Kayembe said:
Keep calm and breath in. I was in the same situation.
Take a breath.
So, you have 2 ways depending on what you want. You can either go back to full stock with a flashing tool or you can install a custom recovery and then installing a custom rom (or stock one). I suggest the flashing tool.
Just follow the steps here: https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306 and if you have any question come back here and ask them.
Good luck.
Click to expand...
Click to collapse
Hey Keyembe, thanks for the reply...
Tried to follow the instructions you posted. Did everything to allow unsigned drivers to be installed. Disabled it on from the advanced boot settings, and - when that didn't work, also running on test mode. Neither options work:
In the device manager I right click the android device (currently in fastboot mode), which is installed with Google drivers. I try to update the driver software to the unsigned driver and I get an error saying it's not compatible with my system (Win10 Pro) and that I should make sure it is compatible with an x64 based system.
What now?
Tx
Hey! Thanks for the reply...

anup807 said:
Recoveryhttps://forum.xda-developers.com/devdb/project/dl/?id=24575
First format recovery by using command
fastboot format recovery
then flash recovery using
fastboot flash recovery "recovery.img"
Click to expand...
Click to collapse
Hi Anup!
Thanks for the link to the Blu_Spark version of TWRP.
On CMD Prompt, tried to format recovery, console stopped responding. "Fastboot format recovery"...Just stops responding
Also tried "Fastboot delete recovery". I get a message saying "deleting recovery..." then also stops responding. Nothing happens from there.
I tried to use the OPO3 Root Toolkit. It does detect the fastboot device, but when I try to flash or boot or do anything else other than detection, it is unable to find the device. Says operation failed.
What now? :crying:

You could look through this post if nothing else helps.
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/

Machiel187 said:
You could look through this post if nothing else helps.
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
Click to expand...
Click to collapse
Check your cable (try another one), even reinstall your adb drivers on your machine (if Windows).
Let the device charge for 30 minutes at least then retry (charge with new cable too).

ppppp44 said:
Hey Keyembe, thanks for the reply...
Tried to follow the instructions you posted. Did everything to allow unsigned drivers to be installed. Disabled it on from the advanced boot settings, and - when that didn't work, also running on test mode. Neither options work:
In the device manager I right click the android device (currently in fastboot mode), which is installed with Google drivers. I try to update the driver software to the unsigned driver and I get an error saying it's not compatible with my system (Win10 Pro) and that I should make sure it is compatible with an x64 based system.
What now?
Tx
Hey! Thanks for the reply...
Click to expand...
Click to collapse
Firstly, plug your phone on your computer in recovery mode or fastboot mode.
When you go in cmd and you type "adb devices" do you get anything?
If that works and you still can access recovery, you can install stock rom available on the OnePlus site. Here's a link : http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_4.1.3/
Boot into recovery, then install from adb.

Machiel187 said:
You could look through this post if nothing else helps.
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
Click to expand...
Click to collapse
Thanks mate, followed the instructions on this post. I never get the device to be detected as Qualcomm. All I get is "Android Phone". I did install the Qualcomm drivers despite the warning I got for installing unsigned drivers. Installation went OK. When I go to the device manager again I still identifies the device as android phone. Also when I click "Have Disk" and select the qualcomm drivers I get an error saying they are incompatible with the device or with an x64 based system (regardless of them being signed or not).
Any ideas?
thanks again..

Kayembe said:
Firstly, plug your phone on your computer in recovery mode or fastboot mode.
When you go in cmd and you type "adb devices" do you get anything?
If that works and you still can access recovery, you can install stock rom available on the OnePlus site. Here's a link : http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_4.1.3/
Boot into recovery, then install from adb.
Click to expand...
Click to collapse
Hey Kayembe,
I only get to fastboot mode. No Adb device detected. No recovery mode available.

ppppp44 said:
Thanks mate, followed the instructions on this post. I never get the device to be detected as Qualcomm. All I get is "Android Phone". I did install the Qualcomm drivers despite the warning I got for installing unsigned drivers. Installation went OK. When I go to the device manager again I still identifies the device as android phone. Also when I click "Have Disk" and select the qualcomm drivers I get an error saying they are incompatible with the device or with an x64 based system (regardless of them being signed or not).
Any ideas?
thanks again..
Click to expand...
Click to collapse
Strange. Are you sure you turned off Driver Signature Enforcement?
When you hold the power button 10 seconds and plug the phone in, it should not be on. The screen should stay black. (looks like its off)
So make sure it's not trying to boot, because then it probably shows up as Android Phonee again.

Machiel187 said:
Strange. Are you sure you turned off Driver Signature Enforcement?
When you hold the power button 10 seconds and plug the phone in, it should not be on. The screen should stay black. (looks like its off)
So make sure it's not trying to boot, because then it probably shows up as Android Phonee again.
Click to expand...
Click to collapse
That's exactly what happens but when it's not in fastboot mode [ either after 10 seconds power button press or after i see the +1 logo (black screen)] - phone is not detected by my pc.
Yeah I'm sure about the driver signature enforcement. It's definitely off.
What am I doing wrong?
Thanks

ppppp44 said:
That's exactly what happens but when it's not in fastboot mode [ either after 10 seconds power button press or after i see the +1 logo (black screen)] - phone is not detected by my pc.
Yeah I'm sure about the driver signature enforcement. It's definitely off.
What am I doing wrong?
Thanks
Click to expand...
Click to collapse
I'm going to do a unbrick in a few hours.. Make sure Driver Enforcement is off. If you go to device manager and right click on it you can change the drivers somewhere so it shows up as described in the post..
Make sure you use method 2.

Puddi_Puddin said:
I'm going to do a unbrick in a few hours.. Make sure Driver Enforcement is off. If you go to device manager and right click on it you can change the drivers somewhere so it shows up as described in the post..
Make sure you use method 2.
Click to expand...
Click to collapse
ok I somehow managed to flash Blu_Spark Twrp and got it to work.
Within TWRP, flashed OnePlus3Oxygen_16_OTA_051_all_1704112009_2521.zip
and also SuperSU.zip, and no_verity.zip.
Getting some errors.
Device still doesn't boot.
Attaching the log TXT here.
I am desperate... please help.,..

Puddi_Puddin said:
I'm going to do a unbrick in a few hours.. Make sure Driver Enforcement is off. If you go to device manager and right click on it you can change the drivers somewhere so it shows up as described in the post..
Make sure you use method 2.
Click to expand...
Click to collapse
BTW, Now when I enter recovery mode on TWRP I am asked to put in a password to decrypt data. I don't have any such password any tried to go over the process of reformatting the device and flashing twrp again. that didn't make this decryption message go away...
((

ppppp44 said:
BTW, Now when I enter recovery mode on TWRP I am asked to put in a password to decrypt data. I don't have any such password any tried to go over the process of reformatting the device and flashing twrp again. that didn't make this decryption message go away...
((
Click to expand...
Click to collapse
try "default_password" for the password

ppppp44 said:
BTW, Now when I enter recovery mode on TWRP I am asked to put in a password to decrypt data. I don't have any such password any tried to go over the process of reformatting the device and flashing twrp again. that didn't make this decryption message go away...
((
Click to expand...
Click to collapse
Go to Fastboot type 'fastboot erase userdata' (you have to reflash OOS tho.. Make sure you are on the latest TWRP. I'm not a fan of Bluspark but his TWRP is currently more up 2 date.

XT1676 - Stuck in Unlocked Bootloader, after Wipe Cache(?!)

Some informations at first:
XT1676 Moto G5, Fine Gold, 16GB
(TYPE M2675/ FCC ID: <known>/ SEQ#: <known>)
2017-10-30
Problem: Stuck in unlocked Bootloader
Hi all,
i am stuck on bootloader and cant get out.
On my PC I have "Minimal ADB and Fastboot"(v. 1.4.2.) installed and after i open a command prompt(admin) and type
- "fastboot devices" my phone is listed as <NR> fastboot
so that works as the only positive thing i can say
- "adb reboot", *daemon not running. starting it now on port 5037*
*daemon started successfully*
error: no devices/ emulators found
- "adb reconnect", error: no devices/ emulators found
i am not into the adb commands at all, i am a dummy and i would be so glad if someone could lead me out of my problem.
Maybe a word how i got into there:
1) i installed the minimal adb and fastboot(v1.4.2.)
2) i unlocked the bootloader by doing that over the Motorola UNLOCK Bootloader site
3) then i rooted & Flash Twrp Recovery (twrp-3.1.1-0-cedric)
with "fastboot flash recovery twrp-3.1.1-0-cedric.img"
4) first time entered into twrp recovery and i did the following:
A) a factory wipe-> reboot back to recovery mode->
B) install no-verity-opt-encrypt-5.1-> reboot and let system start before i turn off phone and enter bootloader(vol down+start) again
C) after entering recovery mode again, i install Magisk-v11.6 -> reboot->
D) now everything seemed to work, the system started properly rooted.
E) but then i decided to flash once again the Magisk-v11.6 followed by wipe data/ factory reset cause i wanted to completly do the flashing all over.
(dont ask me why i did it.. i could explain and tell you my intention but well it happened anyway and brought me to where i am stuck now)
but that was on this move not all yet: i also wipe dalvik cache
so after wipedalvik/ cache , since that moment i couldnt access to my SD Card anymore as it simply didnt show up anymore.
after a restart i was my first time in an endless bootloop of that Screen with "Erasing"(, the letters sourrounded by a spectral colored circle)
i had to disconnect the phone from power . also i tried to remove the battery for a day. but it would only get me back into that bootloop and only get me out by removing the battery...
i dont know anymore what happened then when the phone now got stuck in the bootloader instead of the bootloop. But yea, now i am stuck here, appreciating any help :highfive:
more infromation from my bootloader screen:
AP Fastboot Flash Mode(secure)
BLB8.12 (<known>, 2017-04-19 11:00:47)
Baseband <known>
Product/ Variant: cedric XT1676 16GB P5
Serial Number: <known>
CPU: MSM8937
eMMC: <known>
DRAM: <known>
Console [NULL]: null
Tools Mode Config: DISABLED
Battery OK
flashing_unlocked
Software status: Official
Connect USB Data Cable
- When pressing <Start>
Your device has been unlocked and can't be trusted.
to learn more, visit:
motorola,com/ unlockbootloader
ID: bad key
Your device will boot in 5 seconds.
->
bevor the Phone drops back to Bootloader
when pressing <RESTART BOOTLOADER>
it restarts to BOOTLOADER
- When pressing <Start Recovery>
Your device has been unlocked and can't be trusted.
to learn more, visit:
motorola,com/ unlockbootloader
ID: bad key
Your device will boot in 5 seconds.
->
after 10 seconds another screen poops up:
"Erasing", the letters sourrounded by a spectral colored circle for 3 seconds,
bevor the Phone just drops back to Bootloader
(talking about Erasing ..)
- When pressing <POWER OFF>
Power Off works
- When pressing <FACTORY RESET>
Your device has been unlocked and can't be trusted.
to learn more, visit:
motorola,com/ unlockbootloader
ID: bad key
Your device will boot in 5 seconds.
->
bevor the Phone just drops back to Bootloader
- When pressing <BARCODES>
Barcodes are shown
- When pressing <BP TOOLS>
Your device has been unlocked and can't be trusted.
to learn more, visit:
motorola,com/ unlockbootloader
ID: bad key
Your device will boot in 5 seconds.
->
bevor the Phone just drops back to Bootloader
- When pressing <QCOM>
Your device has been unlocked and can't be trusted.
to learn more, visit:
motorola,com/ unlockbootloader
ID: bad key
Your device will boot in 5 seconds.
->
bevor the Phone just drops back to Bootloader
- When pressing <BOOTLOADER LOGS>
Display shows:
AP Fastboot Flash Mode(secure)
Fastboot Reason: UTAG "bootmode" configured as fastboot
When connecting an USC- cable
Transfer Mode: USB Connected
...shows up but i cant get any adb commands to work tho ofc i am a dummy at it...

oh my, i just helped myself by reading my first poste here on the forum from 2016.
i made it now to start twrp by downloading the twrp_cedric_3.1.1-0 once again putting the recovery in my adb folder and type
<fastboot flash recovery twrp.img>
followed by <fastboot reboot-bootloader>
i am curious if i can get going now and if my SD card will be read and if i can get a new flash going...

now back in twrp i go first again to wipe/ factory reset.
now going to reboot, and reboot back into recovery. only gets me back to bootloader from where i can enter twrp manually now(but there is already an indication of the problem i have?)
also before the reboot, it doesnt ask me to install the twrp app anymore where i usually choose "do not install".
now i go to install the <no-verity-opt-encrypt-5.1>, flashing it successfully as it says at the end of the process but there is also some error message in the log before the ...done:
Failed to mount '/data' (invalid argument)
now i thought i should be able to boot the system again but i only get back into the bootloader...
can someone help me how to proceed correctly?
did i miss something to flash?

Techcri said:
now back in twrp i go first again to wipe/ factory reset.
now going to reboot, and reboot back into recovery. only gets me back to bootloader from where i can enter twrp manually now(but there is already an indication of the problem i have?)
also before the reboot, it doesnt ask me to install the twrp app anymore where i usually choose "do not install".
now i go to install the <no-verity-opt-encrypt-5.1>, flashing it successfully as it says at the end of the process but there is also some error message in the log before the ...done:
Failed to mount '/data' (invalid argument)
now i thought i should be able to boot the system again but i only get back into the bootloader...
can someone help me how to proceed correctly?
did i miss something to flash?
Click to expand...
Click to collapse
For failed mount data goto wipe & select format data (option on the right)
Reboot to recovery
For always going into recovery either you don't have a rom installed or read the faq section on my twrp thread as the answer is there

First of all thanks TheFixItMan, that you are behind it and your thread looks really cool and i will immediatly read and try to understand it!
For now i am stuck in the following:
TheFixItMan said:
For failed mount data goto wipe & select format data (option on the right)
Reboot to recoverye
Click to expand...
Click to collapse
i went to "wipe" & "select format data"
the process shows successfully and "...done" but in the log there is a line of red letter:
<Red Letter>"Failed to unmount '/data' ( Device or resource busy)"
<White Letter> You may need to reboot recovery to be able to use / data again.
i went back and to reboot and recovery.
but recovery wouldnt be booted but i get back to the bootloader(maybe that is still an indication of the problem i have here?)
manually entered recovery i did the select format data again but <red letter> line remains.
TheFixItMan said:
For always going into recovery either you don't have a rom installed or read the faq section on my twrp thread as the answer is there
Click to expand...
Click to collapse
i will parallel read your thread now, thx for being behind it solving the questions! :good:

Techcri said:
First of all thanks TheFixItMan, that you are behind it and your thread looks really cool and i will immediatly read and try to understand it!
For now i am stuck in the following:
i went to "wipe" & "select format data"
the process shows successfully and "...done" but in the log there is a line of red letter:
<Red Letter>"Failed to unmount '/data' ( Device or resource busy)"
<White Letter> You may need to reboot recovery to be able to use / data again.
i went back and to reboot and recovery.
but recovery wouldnt be booted but i get back to the bootloader(maybe that is still an indication of the problem i have here?)
manually entered recovery i did the select format data again but <red letter> line remains.
i will parallel read your thread now, thx for being behind it solving the questions! :good:
Click to expand...
Click to collapse
You have to select recovery from the bootloader menu to enter recovery
You can also type in a terminal window whilst phone connected to pc in fastboot
fastboot erase userdata
This will erase all internal data (the same as format data in twrp)

Important Notes For Stock Rom Users
When you first start TWRP it will ask you to swipe to allow modifications - If you do this your stock rom will no longer boot unless you disable dm-verity.
This can be done either by flashing a disable dm-verity zip or by flashing SuperSu zip which will disable it for you
Click to expand...
Click to collapse
ok, stock rom didnt boot so i flashed the "no-verity-opt-encrypt-5.1" .zip
and voila, i could boot the stock again finally! yipie!
but three things i noticed:
1) the boot progress is suspicous / wrong/ stuck at a moment:
"hello" and "moto" i still see and before the letters of moto start spinning around, the screen freezes for like 2-3 seconds and the next ting i see is the red mouth and cameleon and so on
2) i tried to test camera real quick and it says camera is busy
camera unable to start. if this repeats please power off your phone and restart.
(i did already 5 restarts now and still same problem)
anyway, i wanted to install a ROM now, something like Cyanogenmod.
in this context i wonder what the Magisk-v11.6 does? Does it just give superuser permission and is it always required?
3) system only gives me option to Power Off System(no reboot possible)
and that power off and turn on always gets me first into bootloader tho i dont press vol down+start
Edit:
ok, i have here 3 issues still but it goes offtopic already. i throw a thanks first of all at TheFixItMan and then i think thread cna be closed.
I will soon try to install a ROM, like LineageOS 15.1 , and hope that my previous 3 issues will be solved in the process. . .

Techcri said:
ok, stock rom didnt boot so i flashed the "no-verity-opt-encrypt-5.1" .zip
and voila, i could boot the stock again finally! yipie!
anyway, i wanted to install a ROM now, something like Cyanogenmod.
in this context i wonder what the Magisk-v11.6 does? Does it just give superuser permission and is it always required?
Click to expand...
Click to collapse
Cyanogenmod is now lineageos
Use the latest version of magisk to root (see official magisk thread on xda)
You can run modules to mod phone without tripping integrity or dm-verity which if false will stop apps that check if you are rooted from working
Magisk hide can hide apps from detecting you are rooted on a per app selected basis
3) system only gives me option to Power Off System(no reboot possible)
and that power off and turn on always gets me first into bootloader tho i dont press vol down+start
Click to expand...
Click to collapse
Phone should power off normally
If it can't be started normally without going in bootloader and selecting normal startup see my faqs in twrp thread & follow guide to wiping the misc partition
Note if flashing lineageos 15.1 you will require the 64bit version of TWRP available on the lineageos thread - I did not compile this & don't support it
It also doesn't support encryption as far as I know so if you are encrypted you will need to format data & remove it else the rom will get stuck at the decryption screen

TheFixItMan said:
Phone should power off normally
Click to expand...
Click to collapse
it can be powered off normally as long as its not connected per usb (power or pc)
If it can't be started normally without going in bootloader and selecting normal startup see my faqs in twrp thread & follow guide to wiping the misc partition
Click to expand...
Click to collapse
that was not exactly the problem. my problem is that either i press restart system from system or from recovery, i first get a stop at the bootloader. from there i can just toggle to START and confirm. then my system boots. its just that i first need to confirm in bootloader the Start, always!
at this point i tried now anyways from your Official TWRP For Moto G5 Cedric- Thread |||||| your solution from your faq. But yea, it obviously doesnt fit my problem cause putting the lines in cmd prompt gave me that result and boot still does a stop at bootloader.. before i can start system or recovery..
So yea, after the first codeline didnt trigger for an unknown reason for me...
i hadnt the courage to even try the second more relevant codeline!
Note if flashing lineageos 15.1 you will require the 64bit version of TWRP available on the lineageos thread - I did not compile this & don't support it
It also doesn't support encryption as far as I know so if you are encrypted you will need to format data & remove it else the rom will get stuck at the decryption screen
Click to expand...
Click to collapse
btw, Thx a lot for the information, i appreciate it! i choose LineageOs 15.1 and it runs now. atm i am reading myself into magisk. Also big thanks for your tipp looking up the official thread.

Techcri said:
it can be powered off normally as long as its not connected per usb (power or pc)
that was not exactly the problem. my problem is that either i press restart system from system or from recovery, i first get a stop at the bootloader. from there i can just toggle to START and confirm. then my system boots. its just that i first need to confirm in bootloader the Start, always!
at this point i tried now anyways from your Official TWRP For Moto G5 Cedric- Thread |||||| your solution from your faq. But yea, it obviously doesnt fit my problem cause putting the lines in cmd prompt gave me that result and boot still does a stop at bootloader.. before i can start system or recovery..
So yea, after the first codeline didnt trigger for an unknown reason for me...
i hadnt the courage to even try the second more relevant codeline!
btw, Thx a lot for the information, i appreciate it! i choose LineageOs 15.1 and it runs now. atm i am reading myself into magisk. Also big thanks for your tipp looking up the official thread.
Click to expand...
Click to collapse
That error means your phone is not connected to your pc
Make sure you have enabled adb debugging in phones dev settings before booting into recovery
If you type
adb devices
It will list all devices attached
Once your device is listed the commands will work

TheFixItMan said:
That error means your phone is not connected to your pc
Make sure you have enabled adb debugging in phones dev settings before booting into recovery
If you type
adb devices
It will list all devices attached
Once your device is listed the commands will work
Click to expand...
Click to collapse
and you think that your commands fromyour solution here helps me with my issue that i can start straight to everywhere i want? Cause atm I just always have to go over the bootloader -"stop". From there i have then to manually "START" in order to start system (now: LineageOS 15.1:victory or where i have to manually toggle down to "RECOVERY MODE" and start TWRP.
Well, i would give it a try, but yea dunno what i am doing wrong here atm. i just realized that the command "adb devices" never worked for me yet, cause i got in conflict with the command fastboot adb devices which effectivly works for me. Cause before i installed lineageOS 15.1 i had to flash the twrp cedric 3.2.1-0 x64. i did that over the adb command prompt:
Code:
fastboot flash recovery twrp.img
and in that process i even let my phone restart to bootloader with
Code:
fastboot reboot bootloader
.
now i went to tab build nummer 7 times-> dev options "on" -> android debugging enabled.
when i go to bootloader now or to recovery, and connect my device, for a strange reason in command prompt "adb devices" shows that:
... i dont know why the cmd "adb devices" doesnt show my device. maybe there is a twrp setting i need to change?

Techcri said:
and you think that your commands fromyour solution here helps me with my issue that i can start straight to everywhere i want? Cause atm I just always have to go over the bootloader -"stop". From there i have then to manually "START" in order to start system (now: LineageOS 15.1:victory or where i have to manually toggle down to "RECOVERY MODE" and start TWRP.
Well, i would give it a try, but yea dunno what i am doing wrong here atm. i just realized that the command "adb devices" never worked for me yet, cause i got in conflict with the command fastboot adb devices which effectivly works for me. Cause before i installed lineageOS 15.1 i had to flash the twrp cedric 3.2.1-0 x64. i did that over the adb command prompt:
Code:
fastboot flash recovery twrp.img
and in that process i even let my phone restart to bootloader with
Code:
fastboot reboot bootloader
.
now i went to tab build nummer 7 times-> dev options "on" -> android debugging enabled.
when i go to bootloader now or to recovery, and connect my device, for a strange reason in command prompt "adb devices" shows that:
... i dont know why the cmd "adb devices" doesnt show my device. maybe there is a twrp setting i need to change?
Click to expand...
Click to collapse
Does it display a device when the phone is fully booted
If yes than the recovery you are using doesn't support adb (my official recovery does)
If no I recommend downloading the full android sdk and using the adb that comes with that (you will find it in the platform tools folder where you installed it)

Hello, thx for your support.
I linked the wrong picture. This Screeny shows the related cmd (when dev enabled, booted to recovery, connected via usb to pc and typed adb devices).
Does it display a device when the phone is fully booted. If yes than the recovery you are using doesn't support adb (my official recovery does)
Click to expand...
Click to collapse
it shows the same like linked above and when in recovery mode
so no , the 64bit version of twrp cedric 3.2.1-0 prolly isnt the problem.
If no I recommend downloading the full android sdk and using the adb that comes with that (you will find it in the platform tools folder where you installed it)
Click to expand...
Click to collapse
ok i will try that. and the command prompt i have to open from the directoryy<platform tools folder> then right?
would you deinstall minimal ADB and fastboot before installing full android sdk?

TheFixItMan said:
If no I recommend downloading the full android sdk and using the adb that comes with that (you will find it in the platform tools folder where you installed it)
Click to expand...
Click to collapse
still my phone isnt found
- sdk tools installed
- dev enabled
- adb debugging enabled
- command prompt opened at "...\android-sdk\platform-tools"
either in recovery nor in booted system nor in bootloader "adb devices" finds my phone
so the problem with the "bootstop" (have always to manually press "START" at bootloader) persists..
oh wait... i am not connected as admin! is it possible to open an admin command promp:silly:t?
so i am am reading here atm how to open command prompt in specific folder(platform-tools)
but wife is waiting for dinner so i better do that first..

Techcri said:
still my phone isnt found
- sdk tools installed
- dev enabled
- adb debugging enabled
- command prompt opened at "...\android-sdk\platform-tools"
either in recovery nor in booted system nor in bootloader "adb devices" finds my phone
so the problem with the "bootstop" (have always to manually press "START" at bootloader) persists..
oh wait... i am not connected as admin! is it possible to open an admin command promp:silly:t?
so i am am reading here atm how to open command prompt in specific folder(platform-tools)
but wife is waiting for dinner so i better do that first..
Click to expand...
Click to collapse
On windows 7 - hold shift then right click a white empty space of the window where adb is & select open command prompt here
Windows 7 or 10 - search for cmd then right click on cmd and select run as administrator then navigate using cd commands to adb location or copy & paste location (if any spaces in path then put the entire path in quotation marks)

On windows 7 - hold shift then right click a white empty space of the window where adb is & select open command prompt here
Click to expand...
Click to collapse
yes i did that before as non admin
Windows 7 or 10 - search for cmd then right click on cmd and select run as administrator then navigate using cd commands to adb location or copy & paste location (if any spaces in path then put the entire path in quotation marks)
Click to expand...
Click to collapse
i use win7 and cd'ing to the path was almost getting annoying
as screenshot shows, it still doesnt work

in my desperation i deinstalled now all adb drivers(minimal+ sdk)
ran a ccleaner and cleaned registry and reinstalled minimal adb again (btw, there was a new version by now out, 1.4.3)
so the episodes still goes on and i could figure out some new details
because i bought the same phone again for a relative who needed a phone..
in the process of setting it up correctly( thankfully xda is around ) i enabled dev options and the adb debugging
here is the result for the new phone
that shows now that executing as admin or standard user wasnt the problem. i just did it as standard user..
then i thought "hey cool, wait, i connect now my own G5 and see if i can get the phones' Nr displayed there and make sure my phone can communicate with my pc over adb( dunno if the sentence just made sense- greetz from a dummy)"
what happened is shown in this screenshot .. same picture as before! :crying:
(dont get irritated by the screeny because i used the same command prompt for
first, the new phone and
second, my "old" phone which doesnt boot properly, if you look at the command and the result
i am lost!
is it possible to reinstall a bootloader? or how come my phone doesnt communicate with the pc anymore?
and how come that effects the booting process so that i always get this "stop" at the bootloader although i pressed for a restart?
can i do any more tests that indicates what problem i have here?