DISCLAIMER:
I'm not responsible for any bricked device, as always make a backup of your phone (including EFS)!
Hi all,
I'm proudly to give you an optizimed stock kernel only for GT-I9301I EUR. It's compiled with linaro 4.7.4 toolchain.
What's new:
- Add governors Alucard for MSM8226, darkness, pegasusq, smartmax, intellidemand, intelliactive, interactive, conservative, ondemand, perfomance;
- schedulers noop, deadline, row, cfq, sio, zen
- Compiled with Linaro toolchains 4.7.4
- Optimized for best performance
- Overclock CPU 1,6Ghz;
- Add MSM Hotplug by myfluxi
- Fixed CPU always on 1190 Mhz
- Fixed simple_ondemand
- Disabled DVFS
- Add autosmp hotplug
- Add powersuspend control
- More TCP congestion control: westwood, reno, cubic, vegas, veno, illinois, yeah etc etc
- Tuning up schedulers for better performance and less battery usage
- Cleaning up a little bit the codes
- Add USB Fast Charge support
- Fix errors that prevents deep sleep status
Download link:
https://mega.nz/#!nd8HTT4a!YqzT9o-7tbSQPy7AZAU2teD96u2aBgUbrzlaKdeEYsU - 28 jan 2016 v 2.0
A couple of suggestions:
- Disable mpdecision and enable only MSM Hotplug
- Use Alucard governor
- modify freq_responsiveness @998400
- Enable USB fastcharge under "Battery" if needed
Please donate if you can, press on Donate button!
Tnks to Guido for donation on Paypal
Woooow linaro, the gpu is overcklocked?
For cm 12.1 and résurrection remix ??
Next release will be overclocked. For cm12 you need to wait
Sent from my GT-I9301I using XDA Free mobile app
sev3n1985 said:
Next release will be overclocked. For cm12 you need to wait
Sent from my GT-I9301I using XDA Free mobile app
Click to expand...
Click to collapse
thanks a lot for the new kernel, is a long time since I wanted a custom kernel, tomorrow I try because I'm away from home, thanks to your work.
edit: I extracted the zip I flashed the kernel and boot file with the app rashr, it worked and I installed the kernel without Odin, now I have to choose which to use governor and then I will give a judgment, then install it without fear because it works.
Please add a flashable if it's possible
Sent from my GT-I9301I using XDA Free mobile app
Mike20017 said:
Please add a flashable if it's possible
Sent from my GT-I9301I using XDA Free mobile app
Click to expand...
Click to collapse
I've tried to making a flashable, using Rox's updater script.
Code:
assert(getprop("ro.product.device") == "s3ve3g" || getprop("ro.build.product") == "s3ve3g" || getprop("ro.product.device") == "s3ve3gds" || getprop("ro.build.product") == "s3ve3gds" || getprop("ro.product.device") == "s3ve3gjv" || getprop("ro.build.product") == "s3ve3gjv" || abort("This package is for device: s3ve3g,s3ve3gds,s3ve3gjv; this device is " + getprop("ro.product.device") + "."););
show_progress(0.050000, 5);
ui_print("Flashing kernel...");
package_extract_file("boot.img", "/dev/block/platform/msm_sdcc.1/by-name/boot");
show_progress(0.200000, 10);
ui_print("Done. Reboot.");
When I reboot the kernel is installed but /data doesn't mount at boot. Weird.
Maybe @sev3n1985 can do it fur us. Is it possible?
Sent from my GT-I9301I using XDA Free mobile app
Very Good My Friend
I would overclock the GPU and the CPU, because the stock is the best on Performance.
Danny_Dewet said:
Very Good My Friend
I would overclock the GPU and the CPU, because the stock is the best on Performance.
Click to expand...
Click to collapse
About overclock CPU I suggest to not overlock it because, after some test, the phone become really, really hot only @ 1.5 Ghz, 57°C
I can enable a downlclock @ 249Mhz, overclock gpu, undervolt a little to save battery and try new hotplug drivers. When everything is stable i will release a test version and as always you will try it as a beta tester
sev3n1985 said:
About overclock CPU I suggest to not overlock it because, after some test, the phone become really, really hot only @ 1.5 Ghz, 57°C
I can enable a downlclock @ 249Mhz, overclock gpu, undervolt a little to save battery and try new hotplug drivers. When everything is stable i will release a test version and as always you will try it as a beta tester
Click to expand...
Click to collapse
You are right
I'll try, although fire can get up my s3 Neo Lol
Good Good
Man can u please overclovk the other kernel for cm11. U can atleast add the option those people who want can use it. There are many devices with same chip set and clocked at 1.6ghz could u please try.
Hi!
Is this kernel flashable on neostockx (4.4.2 and 4.4.4)?
How can I change governors i stock rom afetr instaling this kernel?
LuCiolla90 said:
Hi!
Is this kernel flashable on neostockx (4.4.2 and 4.4.4)?
Click to expand...
Click to collapse
Only 4.4.2 on any rom, based on stock
dszymek said:
How can I change governors i stock rom afetr instaling this kernel?
Click to expand...
Click to collapse
After you've installed this kernel you can use an app like Trickster Mod and change governors and schedulers
Thanks
Wysłane z mojego GT-I9301I przy użyciu Tapatalka
Run smooth? Any bug?
rod555 said:
Run smooth? Any bug?
Click to expand...
Click to collapse
try with a stock rom and see...
No bugs, works all
Is this kernel working with BradexRom ?
Related
I present to you
KA Xperia SSpeed kernel v8
04/01: Xperia SSpeed kernel v8 released & changelog updated on 3rd post
Please hit the thx button if you like my kernel
Dear Xperia Acro S users,
This kernel is based on Sony's ICS stock kernel sources. I'll continue to add more features to the kernel in the future
This kernel is specially made for my Xperia S rom: KA Xperia SSpeed, but it should work on stock roms
I hope you enjoy my kernel
== features ==
- All featuers of ICS Advanced stock kernel (pre-rooted, recovery, init.d support etc)
- Added lot of things for better performance
- Extra governers: Pegasusq, Hotplug, Lulzactive, Smartass2, Badass, Lagfree, Interactive, Wheatly
- Extra I/O schedulars: vr, zen, row
- Voltage Control (undevolting is possible)
- 1.89GHz OC
- Zram
- And a lot more
== download == Xperia SSpeed kernel v8 ==
For Each kernel there are 3 versions:
- Normal: 1.5GHz speed recommended if you don't want overclock, but just the optimizations
- Speed: 1.7GHz, perfect if you want safe overclocking.
- Performance: 1.89GHz, this is if you are an overclocking junkie Don't expect it to keep your device cool, it will heat up when doing heavy games etc.
The kernel is in the folder for your device, then choose the version you'd like to download
Mediafire link: KA Xperia SSpeed kernel v8
XDA Fileserver: XDA Fileserver mirror
I kindly ask everyone not to mirror my download links. Thank you
== Important information ==
- Overclocking is a risk, be aware it can harm your device if you do things wrong. But don't worry, every freq below 1.7 Ghz won't harm your device
If you install a new kernel let it settle for a few hours first before overclocking to high speeds
== credits ==
- Arakmar for ramdisk and all his work on advanced stock kernel
- Doomlord for his work on Xperia 2012 kernels
- Sony for kernel sources
- And everyone who helped Doomlord realizing his work
== Installation instructions ==
Important! Only for unlocked bootloader
1) Flash the kernel in recovery:
2) Enjoy it!!
I am not responsible for damage to your device, use at own risk!
Click to expand...
Click to collapse
== Future Updates & changelog ==
- Check third post
== kernel sources ==
- sources: github
== Known Bugs ==
- Report them and I will try to fix them as soon as possible
==Signature image==
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this one is reservedfor future use
Changelog
== Changelog ==
Code:
[QUOTE][B]== Xperia SSpeed kernel v8 [04/01/13] ==[/B]
- Updated to .55 fw kernel source
- Started from scratch
- 2D and 3D GPU OC
- CPU Overclock
- Xperia S, SL and Acro S versions
- A i/o, cpu, mm, ... optimizations
- Zram and Cleancache included
- New governors: Wheatly, Lagfree, Badass, PegasusQ, Hotplug, Smartass2, Wheatly, Interactive
- New I/O schedular: ROW, ZEN
- Updated Ramdisk: updated recovery
- Back to Sony boot logo
- And a lot more
[/QUOTE]
[B]== Xperia SSpeed kernel v7 [15/10] ==[/B]
- Updated to .50fw
- Autoroot with SuperSu instead of Superuser
- Updated to CWM recovery 6
- 3 versions now
[B]== Xperia SSpeed kernel v6 [03/09] ==[/B]
- Added 2 min freq: 84MHz and 138MHz to kernel
- Added new highest freq: 1899Mhz
- Added sio I/O schedular
- Updated ramdisk to fix freq at boot (set at 1.7 GHz)
- Updated mmc
- Updated ramdisk to 6.1.A.2.45 fw
[B]== Xperia SSpeed kernel v5 [13/08] ==[/B]
- Updated ramdisk to 6.0.A.1.84 fw
- Added vr I/O schedular
- Updated code from 3.0.30 to 3.0.32
- Released a 1.5GHz version
- Fixed boot freq to 1.5GHz
[B]== Xperia SSpeed kernel v4 [06/08] ==[/B]
- Make wifi networks with lower signal usable
- JIT compiler for packet filters
- Optimized ARM RWSEM algorithm
- netfilter: fix warning: value computed is not used
- scm: use '.arch_extension sec' if the compiler is newer than gcc 4.5.2
[B]== Xperia SSpeed kernel v3.1 [27/07] ==[/B]
- Changed logo again, didn't like the colors xD Now they match the Jellybean boot anim :)
- Set boot freq in ramdisk too
- Changed recovery background image
- Udated ramdisk
[B]== Xperia SSpeed kernel v3 [26/07] ==[/B]
- Added hotplug & pegasusq governor
- Tweaked hotplug governor
- remade defconfig for smoother kernel
- Added OC until 1.89GHz
- Updated voltages for better speed
[B]== Xperia SSpeed kernel v2 [15/07] ==[/B]
- Added VDD
- Added interactive governor
- Tweaked ondemand governor
- Fixed some bad code in GPU oc
- Set boot freq
- Optimized CPU OC code
- Better stability
[B]== Xperia SSpeed kernel v1 [09/07] ==[/B]
- 1.67 GHz OC
- pre-rooted, init.d support, recovery etc
- Added code for GPU 2D and 3D OC
- Optimized some VM values
Wow, Great work mate . Downloading. . . :crying: :victory:
Problem found:
My phone is just having a black screen and won't boot up -_-. No Sony logo.
bluerain28 said:
Wow, Great work mate . Downloading. . . :crying: :victory:
Problem found:
My phone is just having a black screen and won't boot up -_-. No Sony logo.
Click to expand...
Click to collapse
ok, thx for feedback, it means there is an issue in ramdisk. I'll look at it in a moment
krabappel2548 said:
ok, thx for feedback, it means there is an issue in ramdisk. I'll look at it in a moment
Click to expand...
Click to collapse
My bootloader is locked. Maybe that's the reason why it won't boot I guess. :crying::crying::crying:
Update:
It's working. I just unlocked my bootloader and it's working now. But why is the performance zip is max of 1.8Ghz?
bluerain28 said:
My bootloader is locked. Maybe that's the reason why it won't boot I guess. :crying::crying::crying:
Update:
It's working. I just unlocked my bootloader and it's working now. But why is the performance zip is max of 1.8Ghz?
Click to expand...
Click to collapse
oh ok thx for letting me know
You can choose the version you want, but performance should be 1.89GHZ
isn't it 1.89GHZ?
krabappel2548 said:
oh ok thx for letting me know
You can choose the version you want, but performance should be 1.89GHZ
isn't it 1.89GHZ?
Click to expand...
Click to collapse
No probs. Yes it is 1.89Ghz. I thought performance has a max of 1.7Ghz? . Oh by the way, is there a chance to upgarde the recovery to be the same as the CM recovery (which has ext_card support and others)?
bluerain28 said:
No probs. Yes it is 1.89Ghz. I thought performance has a max of 1.7Ghz? . Oh by the way, is there a chance to upgarde the recovery to be the same as the CM recovery (which has ext_card support and others)?
Click to expand...
Click to collapse
Ok I already added auto-root, but I'll try to update recovery in the weekend
krabappel2548 said:
Ok I already added auto-root, but I'll try to update recovery in the weekend
Click to expand...
Click to collapse
Thanks sir. Oh which CPU OC/UC app is best to use? No Frills or SetCPU? :silly::crying:
HOLY F*CK YES! Thanks for this!!! Works on my Acro S!
Now I'm waiting for your ROM It's ok if it might take time... I'll wait I'm already happy with just a kernel
EDIT: Got improvement on benchmark scores hehe
AnTuTu benchmark scores:
Overall - 8036
RAM - 1596
CPU integer - 2129
CPU float point - 914
2D graphics - 800
3D graphics - 2137
Database IO - 120
SD card write - 150 (18.5 MB/s)
SD card read - 190 (21.1 MB/s)
CPU frequency - 1.5GHz (normal, I don't like to OC)
ItBankRock said:
HOLY F*CK YES! Thanks for this!!! Works on my Acro S!
Now I'm waiting for your ROM It's ok if it might take time... I'll wait I'm already happy with just a kernel
EDIT: Got improvement on benchmark scores hehe
AnTuTu benchmark scores:
Overall - 8036
RAM - 1596
CPU integer - 2129
CPU float point - 914
2D graphics - 800
3D graphics - 2137
Database IO - 120
SD card write - 150 (18.5 MB/s)
SD card read - 190 (21.1 MB/s)
CPU frequency - 1.5GHz (normal, I don't like to OC)
Click to expand...
Click to collapse
Thx for feedback
And try setcpu for voltage control it's a nice app
Sent from my LT26i using xda app-developers app
KA Kernel for acro s finally
Any plans for the ROM?
Sent from my Xperia Acro S using xda premium
winsonlam said:
KA Kernel for acro s finally
Any plans for the ROM?
Sent from my Xperia Acro S using xda premium
Click to expand...
Click to collapse
I guess we can use the ROM of XS but losing the ext_sdcard functionality.
I don't know man ever since I've been using this kernel I'm getting random freezes when browsing on Chrome/Firefox, idk if it's kernel related but I'm using stock .55 ROM. Had to force restart my phone in order to get back
krabappel2548 said:
Thx for feedback
And try setcpu for voltage control it's a nice app
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Why is there no "Voltage Control" on my setCPU?
Perfect like sharm! I use speed version. Thx buttons are pressed 3 times!
can some one explain this and describe each governor and I/O scheduler:
- New governors: Wheatly, Lagfree, Badass, PegasusQ, Hotplug, Smartass2, Wheatly, Interactive
- New I/O schedular: ROW, ZEN
Click to expand...
Click to collapse
???
Do i need to unlock bootloader before flash it via cwm? b/c after i flashed it via cwm my phone's screen gone black....
higherman said:
Do i need to unlock bootloader before flash it via cwm? b/c after i flashed it via cwm my phone's screen gone black....
Click to expand...
Click to collapse
read 1st post.
== Installation instructions ==
Important! Only for unlocked bootloader
...
Click to expand...
Click to collapse
Desperanto86 said:
read 1st post.
Click to expand...
Click to collapse
Ah thanks guy...
Hey Everyone,
I'm by no means a pro at kernel building but I've put lots of effort into these kernels so I thought I'd share them with you. The Uber kernel will always be updated to the latest Kernel version and will be overclocked to 1890 MHz. The Stable Kernels will have similar options but will not be Overclocked. Unlike some of the other T-mobile Galaxy S II Hercules developers out there, I actually have a Galaxy S II and plan on having it until Summer 2014. This means that EVERY KERNEL I POST HAS BEEN TESTED AND IS WORKING although it might not be perfect (few things in life ever are).
Even though I don't post anything unless it works I still don't want to be liable for user errors. In other words, if you flash one of these Kernels your warranty is void and I AM NOT RESPONSIBLE for any data loss or bricked devices etc. That being said, you really have nothing to fear but fear itself because these kernels work and because I packaged a stock kernel so you can revert back at any time. A Clean install is ALWAYS recommended. That does not necessarily mean you can't install these kernels on you current build it just means that you might have problems if you do. Recently apps have been getting corrupted for whatever reason whether on Stock or AOSP and in most cases they cause RRs and SODs. If you find yourself in one of those situations a clean install is the easiest fix. If you want to try and save you apps then connect to you phone while in recovery using adb. Then type adb shell. Now once you are in that shell you can run this command to fix your apps "e2fsck -yfDC0 /dev/block/mmcblk0p25" it could take anywhere from a few minutes to an hour depending on the state of your apps.
IMPORTANT!!!! There are now two 4.3 UBER Kernels. One for Pre OCT 22 and One for Post OCT 22! Due to CM GPU updates you need to be careful which one you flash. Be careful you don't flash the wrong one. Download both for safety sake so you can flash a second one if you get crazy colors and other graphical gliches.
[AOSP 4.3 UBER KERNEL LINK]
UBER 3.4 OFFICIAL RELEASE for PRE OCT 22 AOSP 4.3 (MIRROR)
UBER 3.4 OFFICIAL RELEASE for POST OCT 22 AOSP 4.3 (MIRROR)
[AOSP 4.3 UBER BLN KERNEL LINK]
EXPERIMENTAL BLN KERNEL FOR POST OCT 22
[AOSP 4.3 STABLE KERNEL LINK]
STABLE 3.2 OFFICIAL RELEASE for POST OCT 22 AOSP 4.3 ONLY (MIRROR)
[AOSP 4.2.2 UBER KERNEL LINK]
UBER 2.92 OFFICIAL RELEASE for AOSP 4.2.2 (MIRROR)
UBER BLN EXPERIMENTAL for AOSP 4.2.2
[AOSP 4.2.2 STABLE KERNEL LINK]
STABLE 2.7 OFFICIAL RELEASE for AOSP 4.2.2 (MIRROR)
All old Kernels can be found on Dev Host via this link (be careful you read file names and descriptions carefully if you choose to take a peek around) http://d-h.st/users/Cl3Kener/
Installation Instructions for ALL Kernels
**** IMPORTANT!!! USE TWRP 2.5.0.0 or earlier for 4.2.2 and TWRP 2.6.1.0 + for 4.3.x kernels!!! Failure to do so may result in bootloops due to changes made to TWRP to accomodate SELinux in 4.3.x ROMs which messes up 4.2.2 permissions (Links include flashable TWRP installation zips credits to meekrawb. Just flash them in your current recovery! ) ****
1. For best results a install these kernel after a fresh ROM install (although it still should work if you don't do that)
2. Reboot into recovery (MAKE SURE YOU USE THE RIGHT ONE!!! (See red print above))
3. Flash Kernel Zip
4. Reboot and let Settle for ~10 minutes
5. Install Trickster MOD from the App Store for access to all of the options.
6. Change the settings to something other than INTERACTIVE (Especially if you run it with BFQ it will give you the worst screen lag ever). Then enable "Set at Boot" and push the check mark button at the top right hand portion of the screen or else you will lose your configurations.
7. Enjoy!!!
Error Reporting
I am always open to hearing about your errors although just telling me something went wrong without giving me details does me absolutely no good. So here are my expectations if you do want to complain about something not working:
1. Please list the ROM you are using,
2. The IO scheduler you were using
3. The CPU governor you were using
4. The CPU frequency range (192/1080 etc)
5. What you have done to attempt to fix it.
6. If you were able to simulate it again using the same settings.
7. Anything else you think is applicable to the issue
I would also hope that you would consider trying some of the following things to fix your issue before you ever report it because most of these things will fix the problem without me even having to change a thing.
1) Fix file permissions using a program that does a thorough job. I recommend using the fix file permissions in ROM manager because it is the best I’ve seen. For the record, I don’t actually use ROM manager for anything other than fixing permissions. Please consider trying this first because it tends to fix most of the FC/RR/SOD errors you might have.
2) Make a backup and install a clean version of the ROM you are running and see if you are still experiencing those same errors. You may have corrupted files if you’ve been dirty flashing.
3) If that doesn’t solve it, redownload and reflash, maybe something got corrupted but it still managed to flash. This happens sometimes and I can cause you grief.
4) For advanced users pull a logcat. I know not everyone knows how to do this but you can learn if you check out this OP or other ones like it
SPECIAL THANKS TO:
Android88 - because he is awesome and encouraged me to create this thread!
Samsung - for the source code to build these Kernel (and for making the phone)
Ayysir - for his wonderful tutorial on making a bash script to build kernels and for helping me out all of the time with everything!
Elbermu - For Bringing Thermal and Sweep2Wake to Hercules and for the help!
Bmg002 - For his extensive work fixing/rewriting my init.d scripts
Gruntparty - For completely redoing/fixing the build.prop injector I use for my AOSP Kernels
I Am The Frost - For being my first and best tester on xda. He's debugged several issues in these kernels for me
My kernel Repositories can be found at https://github.com/Cl3Kener/HERC-KERNELS and are properly labeled for your convenience (see the branches)
Informational Links
Here is a fantastic guide on "Innards" of Kernels
Optimizing Linaro Keychains
Building a Bash Script to make Kernels
JOIN MY GOOGLE COMMUNITY IF YOU WANT INSTANT UPDATES ON ANY OF ANDROID STUFF I DO.
Reserved!
XDA:DevDB Information
[KERNEL][3.0.101][LINARO 4.7.4][AOSP UBER/Stable 4.3.x/4.2.2 Kernels][Hercules], a Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Cl3Kener
Kernel Special Features:
Version Information
Status: Stable
Created 2013-09-08
Last Updated 2013-11-22
Changelogs
Changelogs
Changelog UBER 3.4 Official (4.3)
- ONLY FOR ANDROID 4.3!!!
- Kernel Version 3.0.101 - Linaro 4.7.4
- USB fastcharge
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- Overclocked CPU 1890/ GPU 3D = 320 2D = 266
- IO Schedulers - cfq, bfq, row, noop, deadline, sio, vr, FIFO, and zen
- CPU Governors - intellidemand, interactivex, lazy, wheatley, smartass, badass, lionheart, minmax, fantasy, savagedzen, scary and samsung.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Booster
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
Changelog STABLE 3.2 Official (4.3)
- ONLY FOR ANDROID 4.3 and NEW GPU UPDATES (POST!!!
- Kernel Version 3.0.101 - LINARO 4.7.4
- USB fastcharge
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- Overclocked CPU 1728/ GPU 3D = 320 2D = 266
- IO Schedulers - cfq, bfq, row, noop, deadline, sio, vr, and zen
- CPU Governors - intellidemand, interactivex, lazy, wheatley, smartass, badass, lionheart, minmax, fantasy, savagedzen, scary and samsung.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Booster
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
Changelog UBER 2.92 Official (4.2.2)
- ONLY FOR ANDROID 4.2.2!!!
- Kernel Version 3.0.101 - LINARO 4.7.4
- USB fastcharge
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- Overclocked CPU 1890/ GPU 3D = 320 2D = 266
- IO Schedulers - cfq, bfq, row, noop, deadline, sio, vr, FIFO, and zen
- CPU Governors - intellidemand, interactivex, lazy, wheatley, smartass, badass, lionheart, minmax, fantasy, savagedzen, scary, HYPER and samsung.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Booster
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
- Kernel splash screen by shmi117
- Fixed boot charging animation
Changelog STABLE 2.7 Official (4.2.2)
- No CPU OC just stock CPU tables
- Kernel Version 3.0.101 - LINARO 4.7.4
- GPU OC 3D=320, 2D=266
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- USB Fastcharge
- IO Schedulers cfq, bfq, row, noop, deadline, sio, vr, and zen
- CPU Governors intellidemand, interactivex, lazy, wheatley, smartass, smartassv2, badass, lionheart, and asswax.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU Link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Boosters
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
- Kernel splash screen by shmi117
- Fixed boot charging animation
Terminal commands to enable/change a kernel features if you are don't like kernel tuning apps
Fsync
To enable - echo 1 > /sys/module/sync/parameters/fsync_enabled
To disable - echo 0 > /sys/module/sync/parameters/fsync_enabled
USB Fast Charge
To enable - echo 1 > /sys/kernel/fast_charge/force_fast_charge
To disable - echo 0 > /sys/kernel/fast_charge/force_fast_charge
Set Thermal Values
Go to /sys/kernel/msm_thermal/conf/ in a root file browser and change the values
Set MPDecision Values
Go to /sys/kernel/msm_mpdecision/conf/ in root file browser and change the values
Disable CPU Link
echo 0 > /sys/kernel/cpu_gov_sync/force_cpu_gov_sync
Recommended CPU Govs by Category
For Performance
Performance Governor - Full OC
HYPER - full oc
Lionheart - full oc
For good battery life with decent performance use
Intellidemand
Interactivex
Ondemand
Samsung
Lazy
Moderately Conservative
Badass
Conservative
Wheatley (debatable could be in the above category)
Very Conservative
Powersave
SavageZen
not sufficient info? checkout out this op
Looking good. Thanks for the contribution, especially the GPU OC
Just curious, do you take suggestions?
gruntparty said:
Looking good. Thanks for the contribution, especially the GPU OC
Just curious, do you take suggestions?
Click to expand...
Click to collapse
Sure. What would you like to see?
If it is OC the GPU and CPU of the Tiberius Kernel... Don't worry I'm working on it!
Hell yeah might give these a go
JELLYBAM DAMN™
Cl3Kener said:
Sure. What would you like to see?
If it is OC the GPU and CPU of the Tiberius Kernel... Don't worry I'm working on it!
Click to expand...
Click to collapse
Could you add the ROW scheduler?
Would you also add Lulzactive if possible?
Also, does the 4.1.2 Touchwiz kernel have OC?
You should have named your kernel spartacus instead.
Sent from my SAMSUNG-SGH-T989
Shmi117 said:
Could you add the ROW scheduler?
Click to expand...
Click to collapse
Shmi117
Absolutely. I'm so used to CM including that I didn't even notice it was missing..... I guess I already have something to add to Version 1.1
I have a copy of lulzactive. I can try it and see what happens
I'm still adding OC to Tiberius.
cricketAC said:
You should have named your kernel spartacus instead.
Sent from my SAMSUNG-SGH-T989
Click to expand...
Click to collapse
I can always rename my AOSP kernels as Spartacus...
Cl3Kener said:
I can always rename my AOSP kernels as Spartacus...
Click to expand...
Click to collapse
But Tiberius was no match to him. Julius Caesar would be better.
Sent from my SAMSUNG-SGH-T989
Cl3Kener said:
Absolutely. I'm so used to CM including that I didn't even notice it was missing..... I guess I already have something to add to Version 1.1
Click to expand...
Click to collapse
I edited my post could you look at it?
And thanks for the new kernel
EDIT: apparently ROW already exists... I was requesting without even flashing
Shmi117 said:
I edited my post could you look at it?
And thanks for the new kernel
EDIT: apparently ROW already exists... I was requesting without even flashing
Click to expand...
Click to collapse
Actually you're right. For some reason the Samsung kernel source code doesnt have row. I'll add it and lulzactive and Overclocking
Ps I edited mine too
Sent from my SGH-T989 using xda premium
Thanks dude. TW 4.1.2 performs much better with interactive governor than with ondemand. Vector runs much smoother now. Can't wait for CPU and GPU OC!
Sent from my SGH-T989 using xda app-developers app
Cl3Kener said:
Actually you're right. For some reason the Samsung kernel source code doesnt have row. I'll add it and lulzactive and Overclocking
Ps I edited mine too
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Haha thanks man! You are the best! By the way my suggestions are for all kernel types not just the TW one (just saying ).
Cl3Kener said:
Actually you're right. For some reason the Samsung kernel source code doesnt have row. I'll add it and lulzactive and Overclocking
Ps I edited mine too
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thank you very much for picking up kernels. Just when you loose hope over the end of the cerux kernel Cl3Kener comes along and saves the day.
Sent from my SAMSUNG-SGH-T989 using Xparent BlueTapatalk 2
I Am The Frost said:
Thank you very much for picking up kernels. Just when you loose hope over the end of the cerux kernel Cl3Kener comes along and saves the day.
Sent from my SAMSUNG-SGH-T989 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
I'll never forget a little while ago when someone volunteered to flash my Rom and then encouraged my to start a thread.... bet you didn't see this coming!
Sent from my SGH-T989 using xda premium
Nicee starting your own kernel I see. I'm about to update that kernel builds script thread with a video with my latest version of my build script. Be on a lookout for that
Sent from my Nexus 7 using Tapatalk HD
Can I make a request? Or if my wish is simple enough for a quick answer that'd be even better. How do you remove the T-mobile kernel splash screen? Jist figured how to enable custom boot animations but the kernel spash is still there ruining it lol. Thanks!
Sent from my SGH-T989 using xda app-developers app
just flashed your tw 4.1.2 kernel over ptmr3 jedi mind trick jb 1.1. booted fine and ill report back later with my findings.:good:
using trickster mod to set gov/io min/max setting stick after reboot. running very smooth right from the start. CI3Kener i think this one is a keeper. good job bro!!! i appreciate all the hard work you do for this community
skinsfanbdh said:
just flashed your tw 4.1.2 kernel over ptmr3 jedi mind trick jb 1.1. booted fine and ill report back later with my findings.:good:
Click to expand...
Click to collapse
Thanks, that's all I needed to hear. Looks like I'll be flashing this after some much needed sleep.
NOTE - This is only for the Stock Based 4.2.1 rom Kernel, or a ROM that is based on stock, such as GRIMLOCK, ENERGY or CROMI. If you are looking for a CyanogenMod based kernel, then please GO HERE
Looks like nobody is doing kernels for our TF300T anymore so I figured I would give it a try. Please let me know what you think
FEATURES
-Based off of the newest Kernel source from Asus (10.6.1.27.5)
-Dynamic Fsync control [V0.6]
-Modified Ramdisk for insecure kernel and init.d support [V0.1]
-added in smartassV2 governor - more to come [V0.2]
-Overclocking to 1.7GHZ [V0.2]
-Added CIFS support (needs testing) [V0.3.1]
-Added support for requested USB network card (DUB-E100 revision C) [V0.3.1]
-Added SIO, Deadline, and VR scheduler [V0.4]
-Voltage control - [V0.5]
-Hope to have fixed the temp "bootloop" issue [V0.6]
-kexec hardboot to enable data2sd support
-GPU OC control
LINK - GRIMLOCK_KERNEL_V0.8
Version 0.7 now has support for data2sd. If you would like data2sd you will need to flash this patch in recovery: Courtesy of _that
I'm very new to the kernel compiling game so there might be some issues, although I have not run into any. It has been tested on the GRIMLOCK rom stock rooted rom, and should also work on CROMI without issue.
I'd like to thank the following:
_that
sbdags
Hundsbuah
Surdu_Petru
Faux123
untermensch
Without help and contributions from these 6 (as well as others) this would not be possible.
Kernel Source is here
Old versions of Kernel:
GRIMLOCK_KERNEL_V0.7
GRIMLOCK_KERNEL_V0.6
GRIMLOCK_KERNEL_V0.1
GRIMLOCK_KERNEL_V0.2
GRIMLOCK_KERNEL_V0.3.1
GRIMLOCK_KERNEL_V0.4
GRIMLOCK_KERNEL_V0.5
thanks for your work *thumbs up*
i hope this will be a great think in the future
Awesome! Finally a new kernel... Hope you'll add cpu / gpu OC as hunds... :good::good::good:
So to confirm, no TF300TG support in here, right, just TF300T?
Not yet. I'm waiting for asus to drop source for 10.6.2.10
Sent from my HTC One using xda app-developers app
I tested on TF300T stock rom ....very good for this moment
Send to Asus TF300T Stock and S4 mtk6589 rooted
Still in the testing phase but thanks to the source code that @untermensch release for our device it looks like a lot of the changes that he made for 4.1 work on the 4.2 kernel as well.
@hardslog
compiling sources comer error
arch/arm/mach-tegra/pm.c:1087:19: error: inlining failed in call to always_inline ‘read_pmc_wake_status’: function body not available
patch :
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -1084,7 +1084,7 @@ static int tegra_pm_enter_suspend(void)
return 0;
}
-extern inline u64 read_pmc_wake_status(void);
+extern u64 read_pmc_wake_status(void);
static void tegra_pm_enter_resume(void)
{
if (current_suspend_mode == TEGRA_SUSPEND_LP0)
Keshukas said:
@hardslog
compiling sources comer error
arch/arm/mach-tegra/pm.c:1087:19: error: inlining failed in call to always_inline ‘read_pmc_wake_status’: function body not available
patch :
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -1084,7 +1084,7 @@ static int tegra_pm_enter_suspend(void)
return 0;
}
-extern inline u64 read_pmc_wake_status(void);
+extern u64 read_pmc_wake_status(void);
static void tegra_pm_enter_resume(void)
{
if (current_suspend_mode == TEGRA_SUSPEND_LP0)
Click to expand...
Click to collapse
What are your sources and toolchains? I did not run into such a problem.
Did what you were doing work after applying the patch?
Update - OC up to 1.7GHZ
Please see OP for download link for V0.2
Also added in smartassv2 governor.
Basically how this kernel works now is as follows:
Powersave: 1GHZ
Balanced mode: 1.3GHZ
Performance mode: 1.7GHZ
Please let me know how it works for you. It seems stable for me.
I tested Antutu benchmark post result.... on performance mode
Send to Asus TF300T stock foto oc 1,7 GHz and Galati S4 Mtk6589
hardslog said:
Please see OP for download link for V0.2
Click to expand...
Click to collapse
Thank you for your work. Could you make to your kernel support for USB network card (DUB-E100 revision C dev id), as did untermensch after this message with reference to the driver.
lessio.a1 said:
I tested Antutu benchmark post result.... on performance mode
Send to Asus TF300T stock foto oc 1,7 GHz and Galati S4 Mtk6589
Click to expand...
Click to collapse
Is that a good score? I don't use Antutu lol.
BrateloSlava said:
Thank you for your work. Could you make to your kernel support for USB network card (DUB-E100 revision C dev id), as did untermensch after this message with reference to the driver.
Click to expand...
Click to collapse
Please see the OP. I have rebuilt the kernel with the commits that Untermensch made for compatibility for your network card. I hope it works. Please test and provide feedback (Version to get is 0.3.1)
Yes normaly is 13300 now 17340
Send to Asus TF300T stock foto oc 1,7 GHz and Galati S4 Mtk6589
Are you running any rom or stock?
Stock rom
Inviato dal mio GT-I9500 usando Tapatalk 4
hardslog said:
-Added support for requested USB network card (DUB-E100 revision C) - Also needs testing [V0.3.1]
Click to expand...
Click to collapse
Works fine. Thank you.
hardslog said:
-added in smartassV2 governor - more to come [V0.2]
Click to expand...
Click to collapse
I have not noticed positive aspects of its use. The frequency of a one core of processor has been continuously at the maximum and not decrease.
The minimum frequency when I use any governor not be lower 204, though I installed it in 51.
IMHO, you should pay attention to the new version of ondemand and intellidemand that is optimized for use on 4 cores.
hardslog said:
-added in smartassV2 governor - more to come [V0.2]
Click to expand...
Click to collapse
If you are not hard - add in new version of your kernel FIOPS, ROW and SIO from here
If you are going to produce a stable working kernel with overclocking the processor - should think about the temperature control. IMHO, of course. For example, Intelli_termal from Faux123.
BrateloSlava said:
If you are not hard - add in new version of your kernel FIOPS, ROW and SIO from here
Click to expand...
Click to collapse
I have already added VR, SIO and DEADLINE schedulers. They will be in the next release.
BrateloSlava said:
If you are going to produce a stable working kernel with overclocking the processor - should think about the temperature control. IMHO, of course. For example, Intelli_termal from Faux123.
Click to expand...
Click to collapse
Pretty sure Intelli_thermal from Faux123 will only work on Qualcomm based chipsets.
The smartassV2 governor I added in isn't too stable, so I'm thinking that I might remove it.
edit: BTW, Version 0.4 is up. Please see OP
Welcome to F4Kernel
. Performance . Stability . Speed . All - in - One .
Disclaimer :
Code:
#include /*
* Your warranty is now void. *
* This kernel is 100% guaranteed won't eat your pet cat (or dog, it doesn't matter) *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
* DON'T point at me if your alarm dies after flashing this kernel ! *
*/
Current feature :
CM10 / AOSP 4.1.2 based ROM :
- Based on Linux Kernel 3.4.10
- Overclock up to 1300 Mhz (1300 Mhz stable !)
- Underclock up to 61 Mhz
- 1Ghz Undervolt
- GPU Overclock
- Supports LZ4 and Google Snappy compression
- 404 MB userspace RAM
- 14 governors, including :
- smartassv2
- interactive
- conservative
- ondemand
- userspace
- wheatley
- powersave
- smartassH3
- performance
- smartmax
- darkside
- intelliactive
- smoothass
- brazilianwax
- 10 I/O schedulers. List :
- noop
- deadline
- cfq
- bfq
- sio
- fiops
- row
- sioplus
- zen
- vr
- Frontswap, zRAM, Zsmalloc with lots of patches
- Optimizations, lots of optimizations to make it fast
- Fully tweaked I/O schedulers, faster read write access
- Backports from latest stable and mainline Linux Kernel
- Many tweaks to ensure it's solid fast
- Working deepsleep
Stock ROM [Only Alpha] :
- Based on LG latest source (v20b)
- Overclock up to 1.3 Ghz (1228 Mhz is stable, 1.3 Ghz is unstable)
- Underclock up to 128 Mhz
- Undervolt @ 1 Ghz frequency
- GPU Overclock
- 404 MB userspace RAM
- 10 governors, including :
- smartassv2
- interactive
- conservative
- ondemand
- userspace
- wheatley
- powersave
- smartassH3
- performance
- smartmax
- 9 I/O schedulers. List :
- noop
- deadline
- cfq
- bfq
- sio
- fiops
- sioplus
- vr
- zen
- Frontswap, zRAM, qcache and Zsmalloc with patches
- Smooth performance
Feature for future :
- 4.4.4 (KitKat) support [Currently working on this]
- MIUI ROMs support [Almost done]
- More, I guess
Bugs :
- None, tell me if there's one !
INSTALLATION :
1.) Flash the zip
2.) Reboot
3.) Enjoy !
Github
Note : Select correct version, if your phone is P700 select P700 !
Latest downloads is always here
Credits :
- TeamHackLG (base)
- CyanogenMod (defconfig, ROM, etc)
- Optima Team (being a great team, and always there to support me)
- skyinfo (supports me, always !)
place holder
Good work brother.
Congratulations on your first source build.
Hoping for a L5 version once all features are added to L7.
You can try adding some features from Pink's kernel by pinkflozyd
Good luck!
Sent from my Moto G XT1033 using Tapatalk
skyinfo said:
Good work brother.
Congratulations on your first source build.
Hoping for a L5 version once all features are added to L7.
You can try adding some features from Pink's kernel by pinkflozyd
Good luck!
Sent from my Moto G XT1033 using Tapatalk
Click to expand...
Click to collapse
Will look at his github for more info, thanks
BTW, built a new version with OC, undervolt, and more ! check out on download page
Wow,great work brother and big respect from me! [emoji106]
GREETZ FROM TEAM-OPTIMA!!!
So really this can work in CM11 also???
pkatsaras said:
So really this can work in CM11 also???
Click to expand...
Click to collapse
He told he planned to add Kitkat support on this kernel, I guess it can ! It would be amazing !
Sent from my Nexus 7 using XDA Free mobile app
F4uzan said:
Feature for future :
- zRAM, frontswap, zCache
- 4.4.4 (KitKat) support
- MIUI ROMs support
- More, I guess
Click to expand...
Click to collapse
My bad. Now I saw that it is future feature!
KK support will be on future, guys
I'm working on current feature first
Another new version is up ! I've fixed few bugs, added bfq I/O scheduler and smartmax governor
Also, I've fixed few bugs too.
Thih kernel is for stock rom? I m on v20d and i can flash this kernel?thx
Послато са LG-P700 користећи Тапаток 2
toske81 said:
Thih kernel is for stock rom? I m on v20d and i can flash this kernel?thx
Послато са LG-P700 користећи Тапаток 2
Click to expand...
Click to collapse
Sorry, but no you can't flash it. I'm creating a version for stock ROM, it won't be long until it's out.
OKAY ! Big news !
I've got the stock version booting with following features :
- 1.3 Ghz overclock
- SIOPLUS, ZEN, VR, SIO, and DEADLINE I/O scheduler
- 404 mB userspace RAM
But, a bad news for the stock version is WiFi doesn't work. I'll search for a fix soon.
I ll wait your wifi fix
Послато са LG-P700 користећи Тапаток 2
thaks
F4uzan said:
OKAY ! Big news !
I've got the stock version booting with following features :
- 1.3 Ghz overclock
- SIOPLUS, ZEN, VR, SIO, and DEADLINE I/O scheduler
- 404 mB userspace RAM
But, a bad news for the stock version is WiFi doesn't work. I'll search for a fix soon.
Click to expand...
Click to collapse
Its a good news.Will you relise this beta to test?
Nicolas W said:
Its a good news.Will you relise this beta to test?
Click to expand...
Click to collapse
Yes, I'll. I'll release it after a few bugfix, it'll be today.
#F4UZAN : Team Optima
Okay, I'm done with the stock version. WiFi might work on some firmware and some won't.
Anyone here is volunteering to test the stock version ?
F4uzan said:
Okay, I'm done with the stock version. WiFi might work on some firmware and some won't.
Anyone here is volunteering to test the stock version ?
Click to expand...
Click to collapse
I can test, I have 20H .
Nicolas W said:
I can test, I have 20H .
Click to expand...
Click to collapse
P705 ? I'll prepare the .zip soon, I'll send it via PM.
#F4UZAN : Team Optima
thaks
F4uzan said:
P705 ? I'll prepare the .zip soon, I'll send it via PM.
#F4UZAN : Team Optima
Click to expand...
Click to collapse
Yes. p705
This kernel is ONLY for GT-i9295 TouchWiz Lollipop 5.0.1
I'M NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING.
I WILL NOT TAKE ANY RESPONSIBILITY FOR BRICKED PHONES OR LOST DATA.
jrr LL Kernel built from samsung OE8 source for I9295.
Features
- Based on the last Samsung source (OE8) Lollipop
- Linux 3.4.108
- Compiled with the last @Christopher83 LINARO Toolchains 4.9.4 2015.06 optimized for Cortex A15
- OE8 initrams
- STweaks
- Old bootloader support
- F2FS file system support
- FauxSound Audio/Sound Control support (drivers version 3.6)
- Init.d support
- Busybox 1.23.2
- SELinux set to "Permissive"
- Disabled Android Logger (can be disable/enabled it with Stweaks)
- Disabled TIMA verifications and logs
- Disabled Knox verifications
- Auto-Remove Knox Apps
- Fixed write permissions on external SD card
- Fixed screen mirroring issue
- Added tripndroid, row, sio, sioplus, bfq, vr, zen, FIOPS and FIFO I/O scheduler
- Added ArterActive, Barry Allen, Impulse, Optimax, Preservative, intellidemand, asswax, lionheart, smartmax, darkness, abyssplugv2, intelliactive, ondemandplus, nightmare, wheatley, alucard, conservativex, pegasusq, Intellimm, SmartassH3 and Yankactive CPU governors
- Added Performance and Simple GPU governors
- CPU and GPU undervolt support
- Kexec HardBoot support (dual boot)
- Fast Charge
- LED controll
- GAMMA controll
- Vibration Intensity control
- TCP congestion controll
- Intelli_thermal controll
- Zen_Decision
- Others fix and patch for better performance and stability
Bugs:
Tested on my Super WizCyan ROM and no bugs found so far.
Installation
1. Download the kernel zip to your SD card.
2. Format Boot from Custom wipe options
3. Flash the Kernel Zip
4. Reboot and Enjoy
Downloads:
Attached here below first version of jrr kernel
Change log
jrr Kernel
First version
Imperium Kernel
For changelog visit the S4 thread here http://forum.xda-developers.com/galaxy-s4/i9505-develop/kernel-imperium-ll-kernel-v1-0-t3058867
V2.5a
- Incorporated gpu_sysfps
- added some crypto configs
V2.5
- Incorporated changes from imperium V2.5
v2.4 - 28/07/2015
- Compiled with the last Linaro Toolchain 4.9.4 2015.06 by @Christopher83
- Added ArterActive CPU GOV [credits to @arter97]
- Added zen_decision v2.0 [credits to @bbedward]
- ramdisk: Disable zen decision on charger
GitHub:
https://github.com/JASON-RR/jrr_TW_5.0.1_kernel
Credits:
Samsung
Google
@slim80
@Christopher83
Enjoy!!! and don't forget to pass some love by pressing the Thanks button:
Set on DOE8 DeOdex. Everything works fine now, but when you log into the application STweaks direct message -Sorry, no kernel support. Sew fine.
after an hour
Did format boot, wipe dalvik and wipe cache and set a new Kernel, reboot, and everything works fine.
killov1982 said:
Set on DOE8 DeOdex. Everything works fine now, but when you log into the application STweaks direct message -Sorry, no kernel support. Sew fine.
after an hour
Did format boot, wipe dalvik and wipe cache and set a new Kernel, reboot, and everything works fine.
Click to expand...
Click to collapse
The no kernel support in STweaks is due to permissions not getting set in the /res folder when you flash directly over exisiting kernel. Yes, formatting boot before flashing the kernel fixes it.
Kernel is working great so far, Thank you so much!
Gesendet von meinem GT-I9295 mit Tapatalk
No root access in Stweaks without asking for root.
d8389 said:
No root access in Stweaks without asking for root.
Click to expand...
Click to collapse
Check if you denied the SuperSU permission
Friends with regards to improper operation STweak - when entering the application, then when he says that there is no Root or no support kernel, just stupid to choose any profile, such as battery ... and the new application restart STweak, ie the need to get out and go for a new all !
STweaks profiles don't work as these have not been created, you need to adjust the settings manually.
JASONRR said:
Check if you denied the SuperSU permission
Click to expand...
Click to collapse
How it possible when installing from recovery as system app ?
Is it possible, that exposed affects supersu in some way, causing stweaks not to work ?
d8389 said:
How it possible when installing from recovery as system app ?
Is it possible, that exposed affects supersu in some way, causing stweaks not to work ?
Click to expand...
Click to collapse
Did you format boot before flashing the kernel? If not done then this could be the issue. Also at times when you open an app the SuperSu notification gets hidden by some other notification or app denying root permission. Prefer to go to SuperSu and check.
I would like to test this kernel, but before that, I would like to ask anyone, if the battery last longer?
MrMikeTyson said:
I would like to test this kernel, but before that, I would like to ask anyone, if the battery last longer?
Click to expand...
Click to collapse
For me Battery last longer than stock and phone does not get as hot with the below changes in STweaks
- Reduced CPU voltages by one step (-25000) on all frequencies
- MSM-THERMAL - Intelli Temp Control
- Reduced GPU voltages by one step (-25000) on all frequencies
- Disabled Android logger
Everything else is untouched
Are you on Super WizCyan ROM?
MrMikeTyson said:
Are you on Super WizCyan ROM?
Click to expand...
Click to collapse
Yes, that is the ROM I am on
Ok, I'll try the ROM and Kernel.
v2.3 is out! Will you port this kernel-version, too? http://forum.xda-developers.com/showthread.php?p=61921002
Gesendet von meinem GT-I9295 mit Tapatalk
moviecut said:
v2.3 is out! Will you port this kernel-version, too? http://forum.xda-developers.com/showthread.php?p=61921002
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Yes, currently testing, it works well but having stuttering on playing music via bluetooth. Therefore have not released it. Will need to go through all changes one by one which may take days to figure out the cause.
Edit: The simple old solution (upairing and re-pairing) seemed to fix the audio skip over bluetooth, so uploading the new version
Update
Imperium LL Kernel v2.3 uploaded in OP
Just flashed the kernel, very smooth, changed governor to barry_allen, because it is sayed to give good Performance and Battery.
Gesendet von meinem GT-I9295 mit Tapatalk
Installed v2.3 on Samsung's stock OB4, running fine and no problems with STweaks.