My Phone doesn't charged while turn off and no charging animation and can't detect it in my pc but when i power on my phone it charge but still cant detect my phone. I use Blisspop rom when I got into this problem at first It was ok then after 2 days I got into this problem but I think its not rom related I return to my previous back up rom DN4 with A.C mod and still the problem persist..any advise or maybe the problem is the charging port of my n7100.
examiner said:
My Phone doesn't charged while turn off and no charging animation and can't detect it in my pc but when i power on my phone it charge but still cant detect my phone. I use Blisspop rom when I got into this problem at first It was ok then after 2 days I got into this problem but I think its not rom related I return to my previous back up rom DN4 with A.C mod and still the problem persist..any advise or maybe the problem is the charging port of my n7100.
Click to expand...
Click to collapse
try different pc, charger and cable
yaro666 said:
try different pc, charger and cable
Click to expand...
Click to collapse
I try different cable or charger..no use..But in my note 3 its working fine so I guess its not cable,charger or pc.
examiner said:
My Phone doesn't charged while turn off and no charging animation and can't detect it in my pc but when i power on my phone it charge but still cant detect my phone. I use Blisspop rom when I got into this problem at first It was ok then after 2 days I got into this problem but I think its not rom related I return to my previous back up rom DN4 with A.C mod and still the problem persist..any advise or maybe the problem is the charging port of my n7100.
Click to expand...
Click to collapse
Which bootloader you have?
Sent from my GT-N7100
vagsvag said:
Which bootloader you have?
Sent from my GT-N7100
Click to expand...
Click to collapse
4.4.2 bootloader.. I don't know what happened it was working before and suddenly stop working.it was charging when my phone was on..but on offline mode it doesn't..neither the MTP doesn't work when powered on.
examiner said:
4.4.2 bootloader.. I don't know what happened it was working before and suddenly stop working.it was charging when my phone was on..but on offline mode it doesn't..neither the MTP doesn't work when powered on.
Click to expand...
Click to collapse
Stranger, this can happen from old bootloader but if was working before with same rom I don't know. You tried to clean the USB port?
Sent from my GT-N7100
blow some air in port and try to gently press cable when connected, to see if it connects.
Thanks for the reply guys but none of them work. I'm going to bring it tomorrow to the service centre .I still love my note 2 because of A.C mod
examiner said:
Thanks for the reply guys but none of them work. I'm going to bring it tomorrow to the service centre .I still love my note 2 because of A.C mod
Click to expand...
Click to collapse
Ok good luck
Sent from my GT-N7100
Related
Hi Friends ...
I have bricked my phone when I was trying to port one of HERO roms.
every thing was good but i forgot to change internal memo format from yaffs to emmc
and when i reboot the phone doesnt turn and just can connect to emergency mod and the screen is fully black and i cant see any anything
farzad.u235 said:
Hi Friends ...
I have bricked my phone when I was trying to port one of HERO roms.
every thing was good but i forgot to change internal memo format from yaffs to emmc
and when i reboot the phone doesnt turn and just can connect to emergency mod and the screen is fully black and i cant see any anything
Click to expand...
Click to collapse
here is the problem dont try to port roms
try to put gio roms
I had that emergency mode only brick some time ago. i took it to service center and they repaired it for free, LOL
they said that they replaced the chipset.
if you have warranty, try if they repair it for free.
if you can entry into the recovery mode unroot the phone and go it to repair
Oh shoot! Sorry to hear man!
any ideas i am w8ing
Msulviu said:
here is the problem dont try to port roms
try to put gio roms
Click to expand...
Click to collapse
He was trying to port the ROM, not just blindly flashing something from another phone.
If no one bothered trying these sometimes crazy things, there wouldn't be much going on here at XDA.
Missing one line in your updater-script is all it takes. I had a similar incident while trying to flash ICS on my Gio. Way before Maclaw released anything here. Took that phone out for a while.
farzad.u235 said:
any ideas i am w8ing
Click to expand...
Click to collapse
You might get download mode to work by removing the battery, plugging the USB cable in, holding Volume Down, Home and Power simultaneously, and putting the battery back in. Odin should recognize the phone, but in my case it went no further than trying to set up the connection.
I've also read reports on here that the USB jigs that put the proper resistance between pins (4 and 5 iirc) also work on the Gio to trigger a different "Factory" download mode. (Same ones as used on the Galaxy S GT-I9000.)
Good luck,
Darkshado
thank u my friend today i will take my gio to a phone repairer and he can unhardbrick by using box
Dear Friend , I have a galaxy nexus gsm version ( maguro ) , I have the following issue :
I 'm not able with my phone to go in recovery mode or reboot the system , every operation that I try to do on my mobile is not possible.
I have not problem of battery , and is not possible to connect the device by usb cable to the pc.
How can I solve it ? :crying:
Thank you in advanced.
So it just won't turn on? Or will it turn on but refuse to respond? Did you do anything to it or did it do anything just before it stopped working?
Does the computer even recognize the phone is plugged in? There is a thread in this forum about recovering a bricked galaxy nexus.
Shortly after we got our Nexi (the plural of Galaxy Nexus?), my wife's phone wouldn't power on. It wouldn't recognize the charger was plugged in, and wouldn't do anything. I took the battery out, and held the power button for 15-20 seconds. I put the battery back in, and plugged in the charger, with the phone powered off. The charging animation came on. I was then able to power the phone on normally, and we've had no issues since then. It's at least worth a shot.
Call Google or Samsung.
Sent from my Galaxy Nexus using Tapatalk 2
dadenet said:
Dear Friend , I have a galaxy nexus gsm version ( maguro ) , I have the following issue :
I 'm not able with my phone to go in recovery mode or reboot the system , every operation that I try to do on my mobile is not possible.
I have not problem of battery , and is not possible to connect the device by usb cable to the pc.
How can I solve it ? :crying:
Thank you in advanced.
Click to expand...
Click to collapse
can you go in fastboot or download mode??
Read about Odin mode.
Dear friends ,
Thank you all , I solved following this guide.
dadenet said:
Dear friends ,
Thank you all , I solved following this guide.
Click to expand...
Click to collapse
Glad you got it fixed! This was the guide to which I was referring.
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
axatjpr said:
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
Click to expand...
Click to collapse
check through adb if the phone is getting connected or not.
if not then try booting it into fastboot mode or recovery mode.
all the best :good:
hi
axatjpr said:
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
Click to expand...
Click to collapse
i can repair it ... contact me on gtalk [email protected]
KingWickedd said:
check through adb if the phone is getting connected or not.
if not then try booting it into fastboot mode or recovery mode.
all the best :good:
Click to expand...
Click to collapse
i tried using the adb method bt nothin happened. also fastboot mode not working , i tried to enter it bt it doesnt respond
axatjpr said:
i tried using the adb method bt nothin happened. also fastboot mode not working , i tried to enter it bt it doesnt respond
Click to expand...
Click to collapse
Open flashtool
plug device in flashmode
flash stock ftf
done
ManthanRB said:
Open flashtool
plug device in flashmode
flash stock ftf
done
Click to expand...
Click to collapse
nothing is working , it doesnt respond to anything
only responds when i press power key , it shows red light blinking..
anyone other solution?
that means your battery is dead, leave it on the charger overnight ...
Sent from my Nexus 5 using Tapatalk
axatjpr said:
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
Thank you
Click to expand...
Click to collapse
If after charging the battery, LED still blinks red than may be your battery is dead.
try changing the battery.
also try connecting the phone in flashmode
- keep pressing the back button & while holding the back button connect the usb cable.
if green LED is on than your phone is still good.
Report back!
ManthanRB said:
If after charging the battery, LED still blinks red than may be your battery is dead.
try changing the battery.
also try connecting the phone in flashmode
- keep pressing the back button & while holding the back button connect the usb cable.
if green LED is on than your phone is still good.
Report back!
Click to expand...
Click to collapse
no good .. :/
nothing is working .. anything else u got?
No vibration also?
ManthanRB said:
No vibration also?
Click to expand...
Click to collapse
nope nothing..
its dead.. :/
anything else i could do ?
axatjpr said:
nope nothing..
its dead.. :/
anything else i could do ?
Click to expand...
Click to collapse
You said it was giving vibration before & now nothing, did you tried another fully working & charged battery?
ManthanRB said:
You said it was giving vibration before & now nothing, did you tried another fully working & charged battery?
Click to expand...
Click to collapse
nope i didnt , i will try again today then tell u what happens
btw some other guy told me that phone's hwconfig and semcboot are damaged .
i got no idae abt that..
axatjpr said:
nope i didnt , i will try again today then tell u what happens
btw some other guy told me that phone's hwconfig and semcboot are damaged .
i got no idae abt that..
Click to expand...
Click to collapse
You first try the battery method.
problem solved
ManthanRB said:
You first try the battery method.
Click to expand...
Click to collapse
gave phone to some guy and he repaired the phone for 1500 rupee.. he said he rewrote the software .. something something.. and used credits to repair my phone.. So its working fine now.. just facing the battery issue.. so i guess will replace the battery soon.
I need help, my ZF2 suddenly cannot be detected by my windows 7 laptop and pc. When I tried to plug in usb 3 port, it wont get detected. If in usb 2/1 port, it will be detected but with the yellow exclamation mark. I tried updating mtp but it wont update (shows device is up to date). I tried reinstalling ROM and factory reset thru the ROM, but still not working.
I returned to stock but still it wont get detected on my pc or laptop. I ****ed everthing up when I returned to stock since I cant root it back anymore since it wont get detected by adb.
Evereything is up to date including 15sec adb installer 1.4.2 or 1.4.3 and intel usb driver 1.10 from 1.9.
I will try to reformat thru stock recovery and see if it will work. But before doing that, any suggestion or ideas?
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
FrameCall said:
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
Click to expand...
Click to collapse
Yes, it charged when I plugged it on different port. And yes, I have tried different cables, samsung, asus and dont know brand chords. All cables only shows usb device malfunction code 43 and all charged my phone when plugged to ports.
Anybody? Suggestions? Ideas?
Anyone?
Can you check and see if fast charging works?
24imelqui said:
Anyone?
Click to expand...
Click to collapse
Which recovery you installed?
trinimike100 said:
Can you check and see if fast charging works?
Click to expand...
Click to collapse
Fast charging dont work anymore. It will take atleast 2 hrs to charge the phone.
mr_gourav2000 said:
Which recovery you installed?
Click to expand...
Click to collapse
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
24imelqui said:
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
mr_gourav2000 said:
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Click to expand...
Click to collapse
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
24imelqui said:
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
Click to expand...
Click to collapse
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
mr_gourav2000 said:
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
Click to expand...
Click to collapse
Still usb device malfunction code 43. Thanks man
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Abhishek1108 said:
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Click to expand...
Click to collapse
j4nitor said:
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Click to expand...
Click to collapse
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
trinimike100 said:
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
Click to expand...
Click to collapse
I went to a 3rd party repairman and he said he just replaced the flex data cable or something like that, he also said it is common for zenfone smartphone. Then my phone is detectable again.
Hello XDA universe, I need some help to fix my Dead Samsung Galaxy Note 2 (N7100).
In Elaboration, My N7100 was working fine 7 days ago, and I was using CM12.1 on it for over a year, I decided to install CM13 on it, I did the same, first boot was successful, phone booted up like always, then I plugged the charger in and performed a restart, but I didn't boot after that,
Now, I'm left with No display, No Recovery, No Download Mode and No Hope.
I tried using the USB JIG method to get into the download mode, but failed, maybe I didn't do it right,
Please help me out, It was my Mom's personal phone, and I have heard a million scoldings for doing this....
Please somebody help me....?
Do you see the charging screen or charging LED when connected to a charger?
No
audit13 said:
Do you see the charging screen or charging LED when connected to a charger?
Click to expand...
Click to collapse
Sir, thanks for replying, It did that on the very first incident, now it's good as dead.
Please tell me how to recover it.
When the phone is connected to a charger, does the phone get warm? If yes, it could be charging.
To use the jig, remove the battery, insert the jig, insert the battery. The phone should automatically vibrate and boot into download mode. About 15 seconds after inserting the battery, remove the jig, connect the phone to a computer, and see if it shows up under devices.
Vaibhav Puri said:
Hello XDA universe, I need some help to fix my Dead Samsung Galaxy Note 2 (N7100).
In Elaboration, My N7100 was working fine 7 days ago, and I was using CM12.1 on it for over a year, I decided to install CM13 on it, I did the same, first boot was successful, phone booted up like always, then I plugged the charger in and performed a restart, but I didn't boot after that,
Now, I'm left with No display, No Recovery, No Download Mode and No Hope.
I tried using the USB JIG method to get into the download mode, but failed, maybe I didn't do it right,
Please help me out, It was my Mom's personal phone, and I have heard a million scoldings for doing this....
Please somebody help me....
Click to expand...
Click to collapse