Related
I have got this weird problem with my Qtek 9090, I can’t hear a thing from the speaker except incoming calls??? And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
I tried with few other rom, but no success! I even tried with WM5
Could this have anything with the headset plug? Cuse when the headset is plugged (in normal case) you can only hear incoming calls from the phone!
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Guest said:
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Click to expand...
Click to collapse
dude, thanks for trying to help, but you should know better. flashing with a new rom erase everything including the the BT profile. I still think the problem is the headset jack.
And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
Click to expand...
Click to collapse
This is telling me that you DID install the bluetooth again, and so you have a bluetooth profile, what is causing the no sound problem!
I have exactly the same problem as you.. When I remove the bluetooth profile all is working fine again.. that is.. untill I set it up again, and use it.. Than the SAME problem is back.
thank alot , but still got the problem even with the BT-profile removed, I have to use the wired headset to be able to hear anything
Problem Solved :lol: :lol: :lol:
I Opened the damn thing and took a look at the 2,5mm jack and guess what, it was broken ( I remember dropping the phone once for a week ago), I just removed it ( I don’t use the headset but I need the speaker), and everything is loud and clear now,
and with a Sprite Backup file I’m back now :twisted:
!!!?
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Re: !!!?
hishnik said:
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Click to expand...
Click to collapse
I read in another post somewhere that there is a microswitch in/near the headphone jack that switches off the sound to the speaker. Apparently, if it sticks, you poke a paper clip in and twiddle it about and you'll free it.
no sound form jasjar
having same problem. poked around with paperclip and all that, but still no sound. dont need headphone jack because hoping to use latest a2dp hack form latest rom for jasjar to be able to use BT headset. will removing headphone jack affect using BT headphones? need external sound.
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
just got my jasjar back after having cracked lcd and headphone jack replaced. sent to http://www.pocketpctechs.com out of california as suggested by very helpful user on this site. cost me around $20 dollars and took only a day to fix. works fine now!
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Hi chaps,
Wierd issue. Headphones are not detected when plugged into my phone unless I do a reboot. Similarly, when I unplug the headphones they are not 'un-detected' until a reboot.
However, using an app called toggleheadset I can force audio through to my headphones. This is a bit of a pain because 1) I have to remember to do it and 2) I lose Beats functionality.
I have tried using different headphones but this has no effect.
Any ideas as to why the headphone state is only detected at boot?
I have tried different Kernel/ROM combinations but to no avail.
Any help would be greatly appreciated.
also, if anyone can provide me with some pictures of their headphone port so I can compare it to mine that would be great.
Hi,
I have the exact same issue with my HOX since yesterday.
At first I thought the ROM had something to do with the issue, but after flashing several other ROMs, it still wasn't solved. (I haven't flashed back to stock btw)
"toggleheadset" works ok, but I can't use the microphone that way; I can't use my headphones to make calls anymore.
Also when answering phonecalls, sometimes my headphones are still toggled on, so I can't hear the other end. And the worst thing is: when I try to toggle the headphones off during the call, my screen dimms and I struggle to activate the widget. THATS a pain in the ass.
Does anyone know if the issue is software/hardware related? And the best way to solve this?
I'm wondering if this issue affects bluetooth headsets. If it doesn't, I'll consider buying one.
Old thread, but me the same... But my HOX survived waterboarding... I felt into the wather while sailing. Changed battery and screen, but now I see i have one more problem to solve. If any one have solution - please write. But for now I'll try to fix by my own
Cleaning Hole
Try to clean the hole where the Headphones are put in...
If its clean, try to reinstall the rom.
Randomly my headphones stopped working, i plugged them in the phone played music and it came out the speaker like it didnt even recognize them. So i got another pair of headphones and the same thing happened and tried another and still the music played out of the speaker. All of the headphones work fine. So i thought it was a hardware problem like the headphone jack was damaged, but i downloaded the app SoundAbout which can force when playing audio to play to headphones and it works so i know its not a hardware problem, but the app is buggy and i really want to solve the problem, has anybody has this problem and managed to fix it?
Can anyone help please?
nzshock said:
So i thought it was a hardware problem like the headphone jack was damaged, but i downloaded the app SoundAbout which can force when playing audio to play to headphones and it works so i know its not a hardware problem
Click to expand...
Click to collapse
I disagree with the last statement. Just because headset audio works properly, does not mean there isn't a hardware defect (like damaged port) that is causing incorrect indication a headset is plugged in. I've seen such issues here before.
You haven't indicated whether the phone is modified at all (if so, what mods, ROM, etc.) or stock.
It also happened to me.
When I plug-in after reboot it recognizes, but when I unplug and then plug again it doesn't recognize. I have to reboot.
Sense Viper Rom and ElementalX Kernel
CR
redpoint73 said:
I disagree with the last statement. Just because headset audio works properly, does not mean there isn't a hardware defect (like damaged port) that is causing incorrect indication a headset is plugged in. I've seen such issues here before.
You haven't indicated whether the phone is modified at all (if so, what mods, ROM, etc.) or stock.
Click to expand...
Click to collapse
Hi sorry forgot to mention i am on the latest version of stock rom 4.4.3 and not rooted or anything. Im not sure if it would be a hardware problem because when it stopped recognizing the headphones i was in the middle of using them.
nzshock said:
Hi sorry forgot to mention i am on the latest version of stock rom 4.4.3 and not rooted or anything. Im not sure if it would be a hardware problem because when it stopped recognizing the headphones i was in the middle of using them.
Click to expand...
Click to collapse
I'm skeptical whether that would indicate a hardware issue or not.
Since you're completely stock, I'd suggest backing up any personal data, and a factory reset in attempt to determine if there is some software issue or conflict with a 3rd party app. You can also try safe mode.
Weird thing started happening to my phone: when I plug in a pair of headphones (with or without mic) the phone does not detect that they are plugged in! Sound always comes out of the speakers. I've used apps like SoundAbout to force sound of the headset jack and it seems to do the trick. But as you know, this just spoofs the phone... it still thinks it's using the speakers so you'll lose mic capabilities.
The odd thing is that if I turn off my phone, plug in a pair of headphones, and then continue to turn my phone back on... once booted the phone will recognize that it has a pair of headphones plugged in and everything will be fine. Won't work when I unplug and try to replug. It only detects the headphones on boot.
1) Is there a solution to this?
2) Anyone know how the mechanics of this works? It seems like on boot it always tries to check if there are headphones... but something mechanical in the headphone jack triggers the check after boot (may mean I have a mechanical failure)?
3) Is there a way to force headphone mode, more so than what Soundabout does? It's a pain to lose the mic, I use it a lot.
Here are other pertinents:
- Running newest SkyDragon Lollipop GPE rom with Sense Firmware... don't think it's the rom because it worked just last week
- Only recently started happening, not sure what could have caused it
- Noticed the phone always tries to update HTC Service pack, I think I fixed that issue
- Have yet to try cleaning, need to get rubbing alcohol
Thanks for any help anyone can provide me.
headset problem too....
awkm said:
Weird thing started happening to my phone: when I plug in a pair of headphones (with or without mic) the phone does not detect that they are plugged in! Sound always comes out of the speakers. I've used apps like SoundAbout to force sound of the headset jack and it seems to do the trick. But as you know, this just spoofs the phone... it still thinks it's using the speakers so you'll lose mic capabilities.
The odd thing is that if I turn off my phone, plug in a pair of headphones, and then continue to turn my phone back on... once booted the phone will recognize that it has a pair of headphones plugged in and everything will be fine. Won't work when I unplug and try to replug. It only detects the headphones on boot.
1) Is there a solution to this?
2) Anyone know how the mechanics of this works? It seems like on boot it always tries to check if there are headphones... but something mechanical in the headphone jack triggers the check after boot (may mean I have a mechanical failure)?
3) Is there a way to force headphone mode, more so than what Soundabout does? It's a pain to lose the mic, I use it a lot.
Here are other pertinents:
- Running newest SkyDragon Lollipop GPE rom with Sense Firmware... don't think it's the rom because it worked just last week
- Only recently started happening, not sure what could have caused it
- Noticed the phone always tries to update HTC Service pack, I think I fixed that issue
- Have yet to try cleaning, need to get rubbing alcohol
Thanks for any help anyone can provide me.
Click to expand...
Click to collapse
I was experiencing the same problem and I know it is not the hardware since I was able to go back to 4.4.4. GPE and get music thru the headset like you. I tried to get an answer from other contributors but they think it is the jack. Anyway below is what I've wrote to get help.
Quote:
Originally Posted by seadersn
with removal i meant serial and imei in your post before my last post
Thank you for the feedback on personal data. (I appreciated it)
So I've did a factory reset and start flashing the "Stock Google Play Edition Rom LXR22C.H5" rom again.
Since I'm Rooted, this is the one I've flash: RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5_rooted
I've followed the instruction on #2031. Everything else work.... again only plugging in the headset into the jack, does switch music from speakers to headset.
As mentioned before I've upgrade my Stock AT&T HTC One (M8) to GPE 4.4.2 and automatically received all the updates OTA to get to 4.4.4 (Audio was working thru headset and/or speakers with no problems)
The only problem with 4.4.4 is that you don't have access to SD storage. (though I found a patch to update in the system, but haven't tried it)
I like the speed, simplicity of 5.0.1. That is why I keep on trying.
Also I tried changing the Kernel - using skydragon kernel (still same problem with audio). But when I used the kernel for 4.4.4 of GPE, the booting hung at HTC logo before it showed the dead android.
So I'm lost for option other than using an app to manual switch to headset from speaker....(bummer)
Anyway new ideas to proceed are appreciated.
gevans01 said:
I was experiencing the same problem and I know it is not the hardware since I was able to go back to 4.4.4. GPE and get music thru the headset like you. I tried to get an answer from other contributors but they think it is the jack. Anyway below is what I've wrote to get help.
Click to expand...
Click to collapse
Yeah that makes no sense why it would be hardware since you reverted back to 4.4.4 and it worked again.
The other reason why I don't think it's completely hardware is that, as I mentioned before, if you turn off the phone and then leave headphones plugged in while booting up the phone will recognize them. However, unplugging after boot will permanently lose headphone detection until you leave headphones plugged in during a fresh boot.
I'm thinking that either the software is not calling IsHeadphonePluggedIn (hypothetical) when the hardware is triggered (headphone plugged in), but always calls IsHeadphonePluggedIn when the phone boots. OR, the hardware trigger that tells the phone to call IsHeadphonePluggedIn is truly broken leaving cold boot the only method to detect headphones.
Maybe I'll try downgrading at some point but the weird thing is that I swore this was working without any major ROM updates... like just last week! For the time being, I'm using bluetooth.
awkm said:
Yeah that makes no sense why it would be hardware since you reverted back to 4.4.4 and it worked again.
The other reason why I don't think it's completely hardware is that, as I mentioned before, if you turn off the phone and then leave headphones plugged in while booting up the phone will recognize them. However, unplugging after boot will permanently lose headphone detection until you leave headphones plugged in during a fresh boot.
I'm thinking that either the software is not calling IsHeadphonePluggedIn (hypothetical) when the hardware is triggered (headphone plugged in), but always calls IsHeadphonePluggedIn when the phone boots. OR, the hardware trigger that tells the phone to call IsHeadphonePluggedIn is truly broken leaving cold boot the only method to detect headphones.
Maybe I'll try downgrading at some point but the weird thing is that I swore this was working without any major ROM updates... like just last week! For the time being, I'm using bluetooth.
Click to expand...
Click to collapse
Not sure if you've ever used Tasker but you should download that. They have a trigger for "headphone plugged in," and I'd be curious to see if it triggered when you plug in your headphones. You could just have it play a sound or something when it senses headphones. If that works, then it's whatever service handles that hardware interrupt, not the interrupt itself.
thebobmannh said:
Not sure if you've ever used Tasker but you should download that.
Click to expand...
Click to collapse
Yes, I have and use Tasker. In fact, I have a Profile for headphone or bluetooth headset detection. This is how I know the phone is definitively detecting my headphones on boot—the designated Tasker action triggers and I get the Profile highlighted as active.
When I unplug the headphones, Tasker responds accordingly and runs the exist task and the profile is no longer highlighted. When I try to replug, Tasker doesn't do anything. Headphones not detected.
Another tidbit I've discovered:
- Safe mode doesn't help with headphone detection. In fact, there is none even after cold boots. Tried safe mode to isolate any 3rd party apps that might be causing issues.
- To clarify about reboots. The phone needs to be shutdown completely and turned on while the headphones are plugged in to detect. Issuing a reboot via APM doesn't really work, I don't think.
Straaaange.
awkm said:
Another tidbit I've discovered:
- Safe mode doesn't help with headphone detection. In fact, there is none even after cold boots. Tried safe mode to isolate any 3rd party apps that might be causing issues.
- To clarify about reboots. The phone needs to be shutdown completely and turned on while the headphones are plugged in to detect. Issuing a reboot via APM doesn't really work, I don't think.
Straaaange.
Click to expand...
Click to collapse
I'm checking in again to see if anyone solved the headphone detection issue with 5.0.1. As you mentioned about powering down the phone (and not reboot) does detect the headphone, but after you unplug the headphone it revert back to the speakers. No change when you reinsert the jack for the headphone. I've tried all custom roms that uses 5.0.1 and none works with the headphone. Right now I'm still running GPE 4.4.4 on my AT&T One M8. I really like the features of 5.0.1 but not interested in a dual approach to listen to music in my headphone. Let me know if anyone find a new technique that will work with our M8. (I don't think anyone have been able to get the AT&T version of M8 to work with the headphone on 5.0.1.....If I'm wrong please share......)
gevans01 said:
I've tried all custom roms that uses 5.0.1 and none works with the headphone. Right now I'm still running GPE 4.4.4 on my AT&T One M8.
Click to expand...
Click to collapse
I did come across a solution, but it may be unique to me. It's entirely hardware related. Just inside the headphone jack, there is a small connector. I used a pin to pry it out slightly. After doing this, plugging headphones in works like normal. That outer most pin must be the trigger that tells the phone to check if there is a headphone connected.
However, as I mentioned, even without this pin being activated I can still get the phone to detect the headphone buy just cold starting the phone. It may be a difference in how 4.4.4 and 5.0.1 uses the hardware on the phone. I have no clue, it's annoying nonetheless.
So give that a shot!
awkm said:
I did come across a solution, but it may be unique to me. It's entirely hardware related. Just inside the headphone jack, there is a small connector. I used a pin to pry it out slightly. After doing this, plugging headphones in works like normal. That outer most pin must be the trigger that tells the phone to check if there is a headphone connected.
However, as I mentioned, even without this pin being activated I can still get the phone to detect the headphone buy just cold starting the phone. It may be a difference in how 4.4.4 and 5.0.1 uses the hardware on the phone. I have no clue, it's annoying nonetheless.
So give that a shot!
Click to expand...
Click to collapse
Interesting.....Did you open your M8 to pry the pin? I tried looking inside the jack but can't see any pin. Plus I looked at the disassembly video on you-tude for the M8 and said, no way (smile). So I'm willing to try but I can't see the pin you're talking about. Is there a diagram you can point me too? Or provide more information. Very much appreciated...
gevans01 said:
Did you open your M8 to pry the pin?
Click to expand...
Click to collapse
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Maybe you need to change the whole headphone jack. There's a DIY video on youtube for it. Just give it a try if there isn't any other solution.
awkm said:
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Click to expand...
Click to collapse
Thanks for the tip. I will try it and give you feedback.
---------- Post added at 03:42 AM ---------- Previous post was at 03:26 AM ----------
awkm said:
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Click to expand...
Click to collapse
Thanks for the tip. I will try it and give you an update.
gevans01 said:
Thanks for the tip. I will try it and give you feedback.
---------- Post added at 03:42 AM ---------- Previous post was at 03:26 AM ----------
Thanks for the tip. I will try it and give you an update.
Click to expand...
Click to collapse
Well I've reinstalled 5.0.1 and tried digging into the jack, trying to move the 1pm pin just a few centimeters....well I finally gave up. I was not able to make it work and I got concerned that I would damage the jack, which will cost me a fortune in repair bills. (smile)
Thank you for recommendation....I guess I will use the soundabout app until AT&T release the one for our M8.
gevans01 said:
Well I've reinstalled 5.0.1 and tried digging into the jack, trying to move the 1pm pin just a few centimeters....well I finally gave up. I was not able to make it work and I got concerned that I would damage the jack, which will cost me a fortune in repair bills. (smile)
Thank you for recommendation....I guess I will use the soundabout app until AT&T release the one for our M8.
Click to expand...
Click to collapse
Try to wipe the data...its worked for me even I have tat issue 3 weeks before ...after wipe everything going smoothly
Sent from my HTC One_M8 using XDA Free mobile app
Suresh9488 said:
Try to wipe the data...its worked for me even I have tat issue 3 weeks before ...after wipe everything going smoothly0\
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
\
Can you explain in more detail when you say "wipe the data".....Are you referring, go into recovery and do a data wipe? or go into an app (which app) and clear the cache or something?
If you can give me the step by step procedures I would appreciate it.
Also did you try this on a "AT&T HTC One M8" versus a HTC One M8? because I'm beginning to notice that there is a very slight difference between the two.
Thanks,
gevans01 said:
\
Can you explain in more detail when you say "wipe the data".....Are you referring, go into recovery and do a data wipe? or go into an app (which app) and clear the cache or something?
If you can give me the step by step procedures I would appreciate it.
Also did you try this on a "AT&T HTC One M8" versus a HTC One M8? because I'm beginning to notice that there is a very slight difference between the two.
Thanks,
Click to expand...
Click to collapse
Go to setting enter into backup and reset option and do a full reset n try I am sure it will work gud luck
Sent from my HTC One_M8 using XDA Free mobile app
No audio thru headphone after installing 5.0 (problem solved!)
Suresh9488 said:
Go to setting enter into backup and reset option and do a full reset n try I am sure it will work gud luck
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
gevans01 said:
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
Click to expand...
Click to collapse
I am very happy for you....
Sent from my HTC One_M8 using XDA Free mobile app
gevans01 said:
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
Click to expand...
Click to collapse
If you do want to use your klipsch headphones, however, you can just use a standard 3.5mm extension cord in the middle. I've used this trick in the past with an old Nokia and my htc earphones
Sent from my GT-S5830 using Tapatalk 2
n1234d said:
If you do want to use your klipsch headphones, however, you can just use a standard 3.5mm extension cord in the middle. I've used this trick in the past with an old Nokia and my htc earphones
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Great advise...it is cheaper to use an extension then to buy another headphone...thank you.:good:
I had updated to orio, and suddenly my mic gain was lost. and another problem i am facing is my pc not recognise the device anymore.
I had tried with a headphone, still mic not working.
Then tried with a blutooth mic, worked.
Replaced the mic and charging port strip.
Nothing got solved
Really orio update made my 3t useless.
Even tried downgrading to noughat.. Still no change
rinto4u said:
I had updated to orio, and suddenly my mic gain was lost. and another problem i am facing is my pc not recognise the device anymore.
I had tried with a headphone, still mic not working.
Then tried with a blutooth mic, worked.
Replaced the mic and charging port strip.
Nothing got solved
Really orio update made my 3t useless.
Even tried downgrading to noughat.. Still no change
Click to expand...
Click to collapse
Maybe that's a hardware problem?
Then why headphone mic not working.?
and i had replaced the mic strip also
Anybody else having same problem.?