Cyanide VS. CW12 re: Audio and Netflix - Sprint Samsung Galaxy Note II

After a nasty 3-day brick, I got my Note II back up and running with Cyanide (Tablet style version, since I only use WiFi on this device), Shift and gapps all working, Netflix working. THANKS EVERYONE FOR YOUR TIPS.
I use apps like Caustic for writing music on my Android devices. I record performances from an external MIDI keyboard over OTG. Under kitkat, latency was way to high to do this. Notes would sound long after I pressed a key on the keyboard. On my Note Pro 12.2, when I switched to CWM 12 (lollipop) from stock kitkat, the issue was fixed. I could set Caustic to use Open Sles with low latency and it worked great. My Note 4 came stock with lollipop and SAPA and it, too, works great with external MIDI.
I was hoping to get similar performance from the Note II, though I realize it has a slower CPU with only 4 cores. However I figured lollipop would be better than kikat. But once I finally got Cyanide installed, I'm still getting too much latency to use MIDI keyboards.
So I'm wondering about CM12.x.x for the Note II, and if the latency would be any better than Cyanide. Cyanide includes some audio enhancements built in, which, though they may enrich the sound quality for listening to music and videos, could be adding some latency with the additional processing. CW12 on my Note Pro is great for low latency audio, and is all around a "lighter" feeling ROM but I don't know if that's just the octacore processor of that device. I definitely noticed a huge difference between stock touchwiz kitkat and CW on the Note Pro. Cyanide actually seems a bit SLOWER than some of the debloated kitkat ROMs for Note II, but being kitkat, they don't have the low latency audio support of lollipop. (Even if the rest of the user experience seems faster)
Does anyone know anything about how Cyanide differs from CM12 in terms of audio processing? I would "just try it" and flash CW and see if it works...but after that multiple-day brick and all the steps to get it working and set up, I'm a little cautious about flashing stuff capriciously.
And since I also want to watch netflix... I realize netflix doesn't work on CW12 for Note II.... In the Cyanide thread's OP, it mentions flashing Shift, which enables netflix (and sure enough works on my Note II). I searched the CW12 thread but couldn't find anything that indicated if I could flash Shift (and which version) to get netflix working on CM12.

Related

[Q] Note 2 AOSP and CM issues - call recording and high mic gain on camera

Hi Guys,
I am getting sick and tired from my samsung based rom on my Note 2.
Every samsung based rom I use is becoming unacceptably slow and sluggish after some weeks of use and I would like to give another try to a CM or AOSP based rom.
Now the last time I tried that - I was having two main issues which made me to go back to samsung:
1. Video camera Mic gain - the Mic gain when shooting video was very high and that messed up every video I took, especially when filmeing in a loud environment.
2. Call recording - couldn't find a decent call recorder - on samsung I just need to enable it using Xposed and it works flawlessly.
Are those known issues when using custom roms on Note 2 devices?
Can you tell me if there's a solution for those so I can finally use my phone properly?
Thanks in advance!

[audio][app] For those that miss Viper4Android... Works on Lollipop!

One root mod/app I miss quite a bit is Viper4Android. It makes a HUGE difference to audio quality. Even more so on a smartphone with a subpar DAC such as our note 4 (the exynos variants are excluded since they have a Wolfson DAC). Due to the lack of root on the ATT note 4, I've been carrying a secondary device with Viper4Android to enjoy my music with headphones. But not anymore. I've found the next best thing and NO ROOT required. Truthfully, it's not as good as V4A; but it's definitely an improvement over everything else I've tried so far on the note 4. It is called Noozxoide EIZO-rewire PRO.
KitKat Setup:
Install from the play store here
Go to Settings>Sound>Music effects and select Noozxoide
You should be good to go
Enjoy
Lollipop Setup:
Install from the play store here
Go to Settings>Application manager
Swipe to the "ALL" tab
Find "SoundAlive" and disable it
(not sure if this is needed but just in case) Now find "Package Adapt Sound" and also disable it
Noozxoide should now work
Enjoy
Tips:
Get rid of persistent icon/notification -
When you see the app's icon in the status bar, pull down the notification shade and select the noozxoide notification. Untick the box for "Show notifications" and voila no more constant icon in status bar.
Sound quality/app settings:
I personally only bother with the "LINE-OUT" option since that's the one that corresponds to the aux jack.
By just having Noozxoide as the default EQ and all options unchecked in the app I noticed an improvement in sound quality.
- Check the box for "Deliver balanced natural soundstage and premium bass" and select one of the digital presets. Different presets give a different sound signature. Try each and select what sounds best to you.
- *Apparently "VE-Engine (Volume Enhancement)" does not work for our Qualcomm DAC so don't use this*
- For more warmth and bass check the box for "Increase the monitor size with added psycho-acoustic" and again select the effect strength. WARNING! The bass can get very strong!
- For wider soundstage and surround sound check the box for "Create VSUR on practical monitors and widen soundstage" and select one of the room sizes.
My personal settings:
I generally only check the first box and select the "Audiophile" preset. That's it. However, when using closed-back over ear headphones and listening to EDM, I pump up a bit of the bass for some eargasmic, soul crushing bass.
A couple of points I'd like to make:
1. Like I previously stated, I only care about the "LINE-OUT" option. I didn't bother checking out the "BUILT-IN" (speaker) or "WIRELESS" (Bluetooth) options.
2. It is recommended to use good headphones/earphones/speakers to get the most out of this app. Otherwise you might not hear a difference compared to the stock SoundAlive.
3. DOES work with ART and Lollipop
4. MOST IMPORTANTLY, audio quality can very subjective so what sounds good to me may not sound good to you. Try different options and hopefully something will sound good to YOU. If you end up agreeing with me that this is the next best thing to V4A, then you are welcome. Enjoy!
One last thing:
You might ask yourself, "why bother with this if I'm happy with the sound quality of -insert favorite music player-?" The answer is simple. Music players like PowerAmp sound great for playing back music located locally on the phone. However, what if you want great sound quality of all audio play back including streaming music apps like Google Play Music, Pandora, Spotify, etc? That's where this gem of an app comes in :highfive:.
I am not the dev of this app. All credit goes to dogsbark.
THANK YOU SO MUCH FOR THIS! Not being able to root sucks man and V4A was one of the biggest things that I missed the most. Again, thank you for sharing this, it works great on my Note. We don't have many options but this for sure is a good one. Good find.
tony5593 said:
THANK YOU SO MUCH FOR THIS! Not being able to root sucks man and V4A was one of the biggest things that I missed the most. Again, thank you for sharing this, it works great on my Note. We don't have many options but this for sure is a good one. Good find.
Click to expand...
Click to collapse
You're welcome! I'm glad you're liking it. V4A and xposed are tied for most important things I miss about root.
P.S. Just a heads up, Noozxoide doesn't work with ART runtime so it won't work on Lollipop either until (hopefully) the dev updates the app. Something to keep in mind if you're running the ART runtime or if you take the lollipop update once it's released.
DroidBlaze said:
You're welcome! I'm glad you're liking it. V4A and xposed are tied for most important things I miss about root.
P.S. Just a heads up, Noozxoide doesn't work with ART runtime so it won't work on Lollipop either until (hopefully) the dev updates the app. Something to keep in mind if you're running the ART runtime or if you take the lollipop update once it's released.
Click to expand...
Click to collapse
Yeah man, I'm really liking it, it's working pretty damn good. I've never really used xposed so I can't say I miss it, I was more of a ROM whore, I miss that a lot hahaha.
I haven't done anything to this phone, when I switched to AT&T and got the Note 4 and realized I couldn't root it I stopped checking XDA and now work has kept me extremely busy and out of the loop. I have no idea what ART runtime is :crying: I have to catch up... which is a good thing, I have something to look forward to on my off time.
tony5593 said:
Yeah man, I'm really liking it, it's working pretty damn good. I've never really used xposed so I can't say I miss it, I was more of a ROM whore, I miss that a lot hahaha.
I haven't done anything to this phone, when I switched to AT&T and got the Note 4 and realized I couldn't root it I stopped checking XDA and now work has kept me extremely busy and out of the loop. I have no idea what ART runtime is :crying: I have to catch up... which is a good thing, I have something to look forward to on my off time.
Click to expand...
Click to collapse
Oh me too man! I'm a recovering ROM & kernel-holic lol. I would be on the lookout for a ROM and kernel combo that had all the features I needed/wanted plus battery life and performance. Once I found a combo I liked, I would just flash ROM and kernel updates though... until there was a new ROM or kernel to try out lol. Plus I would do a bunch of tweaks that is only possible with root. Ugh I know I could be getting SO MUCH more from this phone with root...
ART is the new runtime, instead of Dalvik, introduced by Google in kitkat. You have the option to run either Dalvik or ART in developer options. It was experimental in kitkat but its the only runtime available in lollipop. It is suppose to improve performance and battery life. Here's more info if you want to read more about ART. LINK
DroidBlaze said:
Oh me too man! I'm a recovering ROM & kernel-holic lol. I would be on the lookout for a ROM and kernel combo that had all the features I needed/wanted plus battery life and performance. Once I found a combo I liked, I would just flash ROM and kernel updates though... until there was a new ROM or kernel to try out lol. Plus I would do a bunch of tweaks that is only possible with root. Ugh I know I could be getting SO MUCH more from this phone with root...
ART is the new runtime, instead of Dalvik, introduced by Google in kitkat. You have the option to run either Dalvik or ART in developer options. It was experimental in kitkat but its the only runtime available in lollipop. It is suppose to improve performance and battery life. Here's more info if you want to read more about ART. LINK
Click to expand...
Click to collapse
That sounds like me! And I agree... this phone could be able to do soooo much more with root.
I remember being able to run either Dalvik or ART vaguely... I can't remember what phone I did that with. Thanks for the link, it's something else I can look forward to on my freetime. I just wish I could tinker with this amazing phone.
In addition, I've tried poweramp, neutron, and jet audio. And I feel like Jet audio with the dsp enabled sounds louder than the rest. I'd go Jet, neutron, poweramp.
omair2005 said:
In addition, I've tried poweramp, neutron, and jet audio. And I feel like Jet audio with the dsp enabled sounds louder than the rest. I'd go Jet, neutron, poweramp.
Click to expand...
Click to collapse
Wow really? Neutron is praised as the best player on android by audiophiles. I use poweramp even though I know the sound quality is better on neutron. I just couldn't deal with the archaic ui of neutron. Looks horrible IMO. But I had not heard of jet audio. Something new to try. Thanks!
Maybe I am blind, but I no longer see a music effect option in the sound menu since the OTA update last night.
Edit: saw your post up above about not working on ART runtime which 5.0.1 makes use of. Wish I would have seen this before moving up.
CamFlawless said:
Maybe I am blind, but I no longer see a music effect option in the sound menu since the OTA update last night.
Edit: saw your post up above about not working on ART runtime which 5.0.1 makes use of. Wish I would have seen this before moving up.
Click to expand...
Click to collapse
Check the OP again
I jumped the gun by claiming incompatibility with ART. I was convinced by reviews in the play store and posts I later found on xda about this app. They were wrong though. Only Noozxoide EIZO-rewire E (not PRO) is incompatible with ART.
I found this out by accident when I took the Lollipop update (didn't format data/factory reset) and noticed Noozxoide was still working :victory:. I looked for the reason why and remembered I had disabled SoundAlive before the update and after the update it was still disabled. So even though you can no longer select Noozxoide manually through Settings>Sound>Music effects, you can enable it by disabling all other dsp's/eq's.
Thank you for taking the time to figure all this out. I tried it the first time and wondered why it wouldn't "work" properly, but seems you figured out the Lollipop side effects. Trying it out now and it seems to be working much better.
I miss root and viper4android soo much and this is the cure to hold me over till then.
Seems to be working fine for me on Lollipop and I installed PRO not E. Incompatibility with ART would stop it from running correct? Not let it load and run, but fail to operate... However If I use NOOZY media player which has M built in, it says that M is incompatible with the DAC and has to run in debugging mode, So I switch to external DFX and PRO kicks in.
lexbian said:
Seems to be working fine for me on Lollipop and I installed PRO not E. Incompatibility with ART would stop it from running correct? Not let it load and run, but fail to operate... However If I use NOOZY media player which has M built in, it says that M is incompatible with the DAC and has to run in debugging mode, So I switch to external DFX and PRO kicks in.
Click to expand...
Click to collapse
Yeah Pro works fine with art and lollipop, it's E that doesn't. From what I remember M is the best compared to PRO and E; however, it was very limited to the dacs it's compatible with (Sabre and burr brown only I believe). I think the plan originally was to make M separate from noozy and make it compatible with more dacs, just like PRO/E, but it seems like development has stopped unfortunately .
Doesn't work with spotify
It works with the stock music player, however, when attempting to use it with Spotify I can't hear any difference no matter what settings i change in Noozxoide, even though when i touch the Equalizer button in spotify settings it still opens the Noozxoide app.
My android version is Lollipop
GalaxyDia said:
It works with the stock music player, however, when attempting to use it with Spotify I can't hear any difference no matter what settings i change in Noozxoide, even though when i touch the Equalizer button in spotify settings it still opens the Noozxoide app.
My android version is Lollipop
Click to expand...
Click to collapse
Hey sorry I didn't reply sooner. I'll install Spotify and see if I have the same issue. I currently only use GPM and Tidal but I did get the subscription to Spotify premium since they have/had the promotion of 3 months for 99¢ and they have an app for my ps4. I'll let you know what I find out.
Thanks Bro... it's the sound solution for my device, alcatel flash2
Hi guys! Would this work in conjunction with an EQ?
I love Viper4Android, unfortunately we can't get it to work for our device as we haven't got root. Noozxoide works great, however, I don't have high-end Headphones..Viper used to compensate for the loss in some audio spectrum, but I can't do that with Nooz, so I'd love to tweak it a bit using another EQ.
TIA
Does this work with Marshmallow? I'm gonna try it tomorrow

[Q] Sound CM11 CM12

Hello! I'm using jfxperias' Evo 9 rom and I love the sound I get from it via poweramp and viper4android. It sounds better than my dead and buried ipod classic did and it saves me one less thing to carry when I go out. Lately I've been trying pure cm11, cm12 and Resurrection remix roms but I don't get the same audio quality and sound levels on them as evo 9 which is kind of a disappointment. This phone is my daily driver and also my music player and I'd like to be able to use newer updated roms on it as time goes by but the sound output is just not the same on the ones I've tried so far. Does anyone else face the same situation here? I would appreciate it if I could get some pointers regarding this. Thanks!

Base Setting For Audio?

When watching videos through the browser...there is hardly any bass(using the speaker). Is there a way to add base? Like if a guy is talking on the video his voice sounds tiny rather than full.
This tab has very very poor default sound settings, If you are not using viperfx or a modified kernel which has some eq settings it sound very poor in terms of bass
Not a lot you can with such tiny speakers, the speakers stereo on my HTC M7 phone are amazing so it can be done.
You can try Viper as mentioned above as long as you are not on android 5+ , A few Tab S owners say it works great.
http://vipersaudio.com/blog/?page_id=25
John
I'm on Android 5.0.2 and I have Viper installed and working.
Yeah, I know it can be done, but it`s supposed to be a bit more difficult to do than with pre 5.0 , if you have a guide, can you post it for other owners, unless it`s wildly known.
John.
vibecatalin said:
I'm on Android 5.0.2 and I have Viper installed and working.
Click to expand...
Click to collapse

Hi-Res output Snapdragon 625

Tested on the lousy zenfone 3 zoom (stock 3.5mm audio sucks inspite of DAC chip because of the poor engine optimization) and it worked like a champ but i believe other devices with SN 625 may benefit from it and they are A LOT, (use 709 build ONLY) other builds won't work as good, i tested them all.
Please do make a feedback on which other device this worked.
Snapdragon 845 devices (e.g. Sony XZ2) – improved Hi-Res Output detection
Sony XZ/XZ1 – improved Hi-Res Output detection
Lenovo X3 – reenabled 24bits
OnePlus (1st edition) – disabled DVC for Hi-Res output due to forced speaker playback
added new per-output option – No Duck – for cases when notification causes issues. Activated by default for Hi-Res output for some Snapdragon 625 devices (Asus Zenfone 3)
HTCs @ 7.0 – improved Hi-Res Output stability
Nexus 6P – fixed notification coloring
Enjoy Hi-Res music all.
Direct download, use poweramp unlocker to activate it.
sam.fisher190 said:
Tested on the lousy zenfone 3 zoom (stock 3.5mm audio sucks inspite of DAC chip because of the poor engine optimization) and it worked like a champ but i believe other devices with SN 625 may benefit from it and they are A LOT, (use 709 build ONLY) other builds won't work as good, i tested them all.
Please do make a feedback on which other device this worked.
Snapdragon 845 devices (e.g. Sony XZ2) – improved Hi-Res Output detection
Sony XZ/XZ1 – improved Hi-Res Output detection
Lenovo X3 – reenabled 24bits
OnePlus (1st edition) – disabled DVC for Hi-Res output due to forced speaker playback
added new per-output option – No Duck – for cases when notification causes issues. Activated by default for Hi-Res output for some Snapdragon 625 devices (Asus Zenfone 3)
HTCs @ 7.0 – improved Hi-Res Output stability
Nexus 6P – fixed notification coloring
Enjoy Hi-Res music all.
link for pros:
<Mod edit>
APK for noobs i'll upload it when the server wakes up
Click to expand...
Click to collapse
Can't see any difference on the audio on Poweramp with this option set for active. The audio quality really sucks on this device.
Mrkblo said:
Can't see any difference on the audio on Poweramp with this option set for active. The audio quality really sucks on this device.
Click to expand...
Click to collapse
Did you toggle the 'Wired headset/AUX" ? and was your test with headphones or via the loud speaker? and what your headphones are?
This release 709 worked for me gloriously! the only problem that it's not free and needs some work that you can find on youtube or i would post a fellow up about the odds of activating it but i just needed a conformation that it at least made a difference by utilizing the DAC chip on board!!
sam.fisher190 said:
Did you toggle the 'Wired headset/AUX" ? and was your test with headphones or via the loud speaker? and what your headphones are?
This release 709 worked for me gloriously! the only problem that it's not free and needs some work that you can find on youtube or i would post a fellow up about the odds of activating it but i just needed a conformation that it at least made a difference by utilizing the DAC chip on board!!
Click to expand...
Click to collapse
I've downloaded the apk you uploaded and followed the screenshots. It made zero difference to the sound quality. Poweramp DVC is great on other devices, but on my zenfone it sucks, the audio is distorted, the only way to tolerate the audio quality is by disabling it. Best player I could find so far for my zenfone is Phonograph.
Mrkblo said:
I've downloaded the apk you uploaded and followed the screenshots. It made zero difference to the sound quality. Poweramp DVC is great on other devices, but on my zenfone it sucks, the audio is distorted, the only way to tolerate the audio quality is by disabling it. Best player I could find so far for my zenfone is Phonograph.
Click to expand...
Click to collapse
The zenfone 3 zoom have an amazing sound quality and believe me the bass is insane via a good headphones, you just need to find a solution to make use of it's potentials, if you want to go throw troubleshooting provide some more information like the exact model and what software build you are currently running... you are right about the distortion i was very upset with the sound quality at the beginning but poweramp made the DAC work properly.
sam.fisher190 said:
The zenfone 3 zoom have an amazing sound quality and believe me the bass is insane via a good headphones, you just need to find a solution to make use of it's potentials, if you want to go throw troubleshooting provide some more information like the exact model and what software build you are currently running... you are right about the distortion i was very upset with the sound quality at the beginning but poweramp made the DAC work properly.
Click to expand...
Click to collapse
I wouldn't say that the sound quality on the zenfone 3 zoom is amazing. This DTS audio thing is terrible and makes sound awful. I've installed an even older version of poweramp and tried your solution, and it made a difference with my JBL T210 (not the best one around, surely). However, using Poweramp with DVC on an old Galaxy S6 that I have laying around is still miles better. Sound quality is my only complaint about this phone, that's why I was hoping for a custom rom for this thing.
Mrkblo said:
I wouldn't say that the sound quality on the zenfone 3 zoom is amazing. This DTS audio thing is terrible and makes sound awful. I've installed an even older version of poweramp and tried your solution, and it made a difference with my JBL T210 (not the best one around, surely). However, using Poweramp with DVC on an old Galaxy S6 that I have laying around is still miles better. Sound quality is my only complaint about this phone, that's why I was hoping for a custom rom for this thing.
Click to expand...
Click to collapse
Yeah you're absolutely right that DTS is a marketing thing and it sucks, you just keep trying on that poweramp 709 build only and try downloading it from APKPURE or somewhere else because the one that i provided was patched with lucky patcher and i hoped it would work with a non-rooted device to skip the activation process but apparently that is not the case, after i reflashed the phone and got rid of the root access i had to install poweramp unlocker and i have to reinstall the the main app every 2 days because without the root i can't seem to be able to activate it, keep digging, i know what a good DAC sounds like, it's not an HTC native level but it's miles ahead of the stock drivers and even better than viper4android module on magisk.
sam.fisher190 said:
Yeah you're absolutely right that DTS is a marketing thing and it sucks, you just keep trying on that poweramp 709 build only and try downloading it from APKPURE or somewhere else because the one that i provided was patched with lucky patcher and i hoped it would work with a non-rooted device to skip the activation process but apparently that is not the case, after i reflashed the phone and got rid of the root access i had to install poweramp unlocker and i have to reinstall the the main app every 2 days because without the root i can't seem to be able to activate it, keep digging, i know what a good DAC sounds like, it's not an HTC native level but it's miles ahead of the stock drivers and even better than viper4android module on magisk.
Click to expand...
Click to collapse
No worries about that. I've purchased the app years ago. The only thing now is that I can't allow it to update. Thanks for the hint, the sound is clearly better now.
sam.fisher190 said:
...because the one that i provided was patched with lucky patcher and i hoped it would work with a non-rooted device to skip the activation process but apparently that is not the case,...
Click to expand...
Click to collapse
THREAD CLOSED! Download file removed!
XDA Forum Rules (excerpt):
...
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
...
Click to expand...
Click to collapse

Categories

Resources