[T110] black screen with usb sound - Galaxy Tab 3 Q&A, Help & Troubleshooting

hi every one
i have samsung sm-110 i have rooted it using odin3 and its goes smothing succes
after maybe 1 month i got update for superuser (i press update by cwm or some thing like this HTC
then the device boot on recovery mood v6.0.4.8 and when ever i restart its boot on recovery mood after show device model logo its boot on recovery so i try to flash the device using oden3 i download offical rom and when i make device on download mood i click start on odin i get failed
so i try to Disconnect and reconnect then press start no thing happen i just Disconnect and try to restart the sm-t110 br press (v down +home + power)
i got black screen (when i connect the sm-t110 to the laptop i got usb sound but with black screen)
i try to press (v up + power + home ) i get ( Disconnect and reconnect usb sound with black screen on sm-t110)
and odin3 didnt read the device any more
sry for bad english i hope u guys understand and thanks

Related

[Q] [ACRO S] Black screen, no respoding after instaling kernell.

Hi all
My phone is not responding, after unpuging USB cable when i instaled kernell from this pack: http://forum.xda-developers.com/showthread.php?t=2411343
1. I unlocked bootloder using fastboot and this go fine.
2. After that i use flashtool to instal kernel, and this also go well but after i instal kerlle the usb cable was unplug and then i got this black screen.
Now i got black screen on power on. The power button dosnt work normally.
Phone is not recognized in PC or Flashtool.
Only two combinations of keys work:
Pwr + vol + = reset of the phone, after reset it is a short time when Sony logo came up, and purple led flesh once.
Pwr and vol up and down = phone is shutdown
Is this some wat to rescu this phone? Or i got one, nice looking brick?
P.s. Sorry for my english.
elcidx said:
Hi all
My phone is not responding, after unpuging USB cable when i instaled kernell from this pack: http://forum.xda-developers.com/showthread.php?t=2411343
1. I unlocked bootloder using fastboot and this go fine.
2. After that i use flashtool to instal kernel, and this also go well but after i instal kerlle the usb cable was unplug and then i got this black screen.
Now i got black screen on power on. The power button dosnt work normally.
Phone is not recognized in PC or Flashtool.
Only two combinations of keys work:
Pwr + vol + = reset of the phone, after reset it is a short time when Sony logo came up, and purple led flesh once.
Pwr and vol up and down = phone is shutdown
Is this some wat to rescu this phone? Or i got one, nice looking brick?
P.s. Sorry for my english.
Click to expand...
Click to collapse
you need to install the rom ... not only the kernel ... once the purple led comes press the volume up key , it'll take you to the recovery . Do a factory reset and then install the rom ..

EMERGENCY Brick!

hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.

[Q] screen goes black when use recovery...need help

i unlocked phone and flashed recovery , then installed successfully but when go to recovery screen became black..
and now my only shows black screen the phone is not in switch off mode its on but not working...please help i'm worried about it ??????plz reply soon
ishan4999 said:
i unlocked phone and flashed recovery , then installed successfully but when go to recovery screen became black..
and now my only shows black screen the phone is not in switch off mode its on but not working...please help i'm worried about it ??????plz reply soon
Click to expand...
Click to collapse
try to restart try combination (VOLUP+POWER)OR(VOLDOWN+POWER)
If no change connect your phone with usb and try to restart phone with adb command ( adb reboot )
i had that issue when i did it. had to hold all 3 buttons for 15 seconds... booted into a Safe mode. Also have to use this if im plugged into a usb and powered off (shows battery icon as charging. red text saying development purposes only) power button+volume up+ volume down.

Appear usb logo if go to recovery mode

Please Help,
my previous SKU TW and has been updated to SKU WW, after that i root and no problems
problems arise when an update after the completion of the update ota, afterrestart and appeared logo usb
I turn off HH then I try to get in recovery (press vol up + power) persists logo usb
I unplug and then I turn to normal as usual there is no problem and can get android os
but at the time of press the power button + vol up always appear usb logo
sorry for my bad english

under recovery mode blank screen appears in HTC one X need help

oI flashed cwm over to my root, bootloader is unlocked and everything. but when I go into recovery mode I get a black screen with nothing on it, and no touch funtion or anything . I thoughght it was bricked until I held the power button for 10 seconds and my computer registered it as being disconnected through usb and the charge light came on . I then flashed twrp over and still, nothing in recovery mode . just a black screen with my computer registering usb input. I don't know what to do. I had to restart it many times pressing the volume down button, holding down power button ect. before it would boot normally but the recoverymode leads to nothing
Same here i have samsung grand 2 rooted my phone and tried to flash cwm,twrp and philz recovery through odin and flashify but when i go to recovery blank screen appers and i have to pull out the battery and restart my phone
Please help???
jigar_shah10 said:
oI flashed cwm over to my root, bootloader is unlocked and everything. but when I go into recovery mode I get a black screen with nothing on it, and no touch funtion or anything . I thoughght it was bricked until I held the power button for 10 seconds and my computer registered it as being disconnected through usb and the charge light came on . I then flashed twrp over and still, nothing in recovery mode . just a black screen with my computer registering usb input. I don't know what to do. I had to restart it many times pressing the volume down button, holding down power button ect. before it would boot normally but the recoverymode leads to nothing
Click to expand...
Click to collapse
run from fastboot this command fastboot erase cache and then try to go in recovery

Categories

Resources