[Q] Screen turn off when applied pressure on the screen - ZenFone 2 Q&A, Help & Troubleshooting

Recently noticed that whenever i applied pressured on the screen, the screen would turn off. Disabled double tap, problem still persist. Anyone with similar experience?

MiCmAsTa said:
Recently noticed that whenever i applied pressured on the screen, the screen would turn off. Disabled double tap, problem still persist. Anyone with similar experience?
Click to expand...
Click to collapse
I applied some pressure around my screen and nothing happened.

cmendonc2 said:
I applied some pressure around my screen and nothing happened.
Click to expand...
Click to collapse
Well, i guess its something to do with the Hardware issue. Oh well....

maybe a loose ribbon cable?

Got my phone back from the service centre and they diagnosed with a Faulty Back Light. Got the whole LCD replaced FOC.
Sent from Nokia 3310ie (Internet Edition)

Related

Desire's screen turns off on dialing/call

Good day,
It seems this issue has been discussed widely and regularly but I couldn't find a solution that works and I hope you can assist.
My -rooted/Redux- Desire's screen goes off when calls are made regardless of whether it is close to face or not, in addition it doesn't come back on until the call is ended -or battery is replaced- and obviously this can only be done by the other party as my screen stays blank and unresponsive..
Any thought or help would be greatly appreciated..
Regards.
Do you use any kind of sticker or a case which is near to the sensor ?
I had similar experiance with a sticker before. for 6 months it didn't cause any problem but after 6 months it caused some with problems with light and proximity sensor.
Harnec said:
Do you use any kind of sticker or a case which is near to the sensor ?
I had similar experiance with a sticker before. for 6 months it didn't cause any problem but after 6 months it caused some with problems with light and proximity sensor.
Click to expand...
Click to collapse
Hi,
No, nothing at all.
Thanks.
I had this problem so i flashed a different ROM and it stopped doing it, sorry im not very technical but it worked for me, try it
AntAust1513 said:
I had this problem so i flashed a different ROM and it stopped doing it, sorry im not very technical but it worked for me, try it
Click to expand...
Click to collapse
Ant,
Thanks but this is my third ROM, didn't help, any other thoughts?
Sent from my Desire HD using XDA App
Maybe the proximity sensor is knackered. Could be your phone that needs repairing. On the other hand you should be able to turn the sensor off if its getting too annoying by going into settings calls or display can't remember precisely buy there should be an option there to turn it off. Hope it helps.
Sent from my HTC Desire using XDA App
gmehtctilt said:
any other thoughts?
Click to expand...
Click to collapse
There might actually be a dust particle under your digitizer, which caused the proximity sensor to malfunction
That's what my Desire has for a few months now.. Drived me crazy, until I started using CM7 which allows me to switch the screen on by pressing the power button during calls. But sometimes it still doesn't respond. Plugging in a powered USB cable is another solution then.
Anyhow, check if your proximity sensor is working by using Z-DeviceTest for example. If the sensor is indeed not working properly, there might be some dust on the sensor. Take off your backplate and blow around the power button area. Worked on my phone the first few times it occurred..
Hope this helps!

Replaced Digitizer, Now Only Blank Screen

Hello all,
My Evo had a REALLY badly cracked glass screen, but other than that it worked fine. I replaced the digitizer and it won't turn on properly now. It vibrates, and the screen's backlight turns on, but nothing else happens. I've checked the connections, but nothing I do will have any other effect. When the phone is off, it'll charge the battery just fine, so I'm fairly sure it's not the motherboard. Could I have damaged the connectors? Everything looks fine.
Does anyone have any suggestions on how to fix this?
I think the phone rejected the screen this happens to us all the time over at the xperia play forum
sent from my Sony Ericsson xperia play ™ (r800x) using Tapatalk 4
Smyc151 said:
Hello all,
My Evo had a REALLY badly cracked glass screen, but other than that it worked fine. I replaced the digitizer and it won't turn on properly now. It vibrates, and the screen's backlight turns on, but nothing else happens. I've checked the connections, but nothing I do will have any other effect. When the phone is off, it'll charge the battery just fine, so I'm fairly sure it's not the motherboard. Could I have damaged the connectors? Everything looks fine.
Does anyone have any suggestions on how to fix this?
Click to expand...
Click to collapse
Try a different one,obviously its a bad Digitizer.Replace it,if it still does it,could be the ribbon wire.

LCD screen issue

I've quite recently replaced the screen on my device yet the same issue in the images occurred as when it first went. I left it off for a couple of days. Turned it back on and is working again however there are very fine Black horizontal lines through the screen and the back light dims and brightens when using the touch screen. Any help is greatly appreciated
|Sent from the bowels of my crypt|
traumatism said:
I've quite recently replaced the screen on my device yet the same issue in the images occurred as when it first went. I left it off for a couple of days. Turned it back on and is working again however there are very fine Black horizontal lines through the screen and the back light dims and brightens when using the touch screen. Any help is greatly appreciated
|Sent from the bowels of my crypt|
Click to expand...
Click to collapse
I assume you reflashed your phone the first time (loaded a fresh ROM). If so, it might be an issue with the screen. I know you already replaced it, but the issue might be with the screen connector cable.
dyczone said:
I assume you reflashed your phone the first time (loaded a fresh ROM). If so, it might be an issue with the screen. I know you already replaced it, but the issue might be with the screen connector cable.
Click to expand...
Click to collapse
All sorted. It was not only the screen but the flexi-cable ribbon. it was quite worn so I purchased another piece for it and hey presto. its all working. well...apart from the fact ive somehow broken the power switch so need to get a replacement for that somehow. fortunately i have the bugged recovery so i can boot my phone by plugging it into a charge cable to get it to boot.

Sudden phone screen issue

Hello,
I've had my A70 for almost 8 months now, it's been great and I never had any issues with it, no root, no ROMS, nothing out of ordinary. While I was using it yesterday night, the screen suddenly turned off, I was surprised because the battery was almost full, so I thought maybe I pressed on the power button by mistake, so I pressed it once again, only to keep looking at my reflection on the screen, I tried force rebooting the phone, no luck, OK google works, Face recognition also works normally, everything is working, but I can't see anything on the screen, I thought that it might be a screen issue, but I don't think it is anymore, because sometimes when I hold it in certain ways, the screen works but with apparent noise/flicker, or shows incorrect colors, I'd like to show you but sadly I don't own any other phone. Could it be a connector issue that can be fixed easily? and if anyone is in Germany, any idea how much a fix could cost?
Thank you.
1Recycle Bin1 said:
Hello,
I've had my A70 for almost 8 months now, it's been great and I never had any issues with it, no root, no ROMS, nothing out of ordinary. While I was using it yesterday night, the screen suddenly turned off, I was surprised because the battery was almost full, so I thought maybe I pressed on the power button by mistake, so I pressed it once again, only to keep looking at my reflection on the screen, I tried force rebooting the phone, no luck, OK google works, Face recognition also works normally, everything is working, but I can't see anything on the screen, I thought that it might be a screen issue, but I don't think it is anymore, because sometimes when I hold it in certain ways, the screen works but with apparent noise/flicker, or shows incorrect colors, I'd like to show you but sadly I don't own any other phone. Could it be a connector issue that can be fixed easily? and if anyone is in Germany, any idea how much a fix could cost?
Thank you.
Click to expand...
Click to collapse
I had an issue with the screen a while back and went to a Samsung service. They replaced the screen along with the battery under warranty.
https://r.tapatalk.com/shareLink/to...3&share_fid=3793&share_type=t&link_source=app
Sent from my SM-A705FN using Tapatalk
Siberian Tiger said:
I had an issue with the screen a while back and went to a Samsung service. They replaced the screen along with the battery under warranty.
https://r.tapatalk.com/shareLink/to...3&share_fid=3793&share_type=t&link_source=app
Click to expand...
Click to collapse
If it's under warranty, go to your regional Samsung office for repair
Did u update to android 10? If so enable accidental touch protection they fricked something up there seen multiple phones after the update with this issue. Hopefully Samsung will release an fix soon bcs its anoying as frick.

Question Unresponsive touchscreen

Hello everyone!! Before one week my fingerprint sensor stopped working! After two days of that troobleshoot my fingerprint sensor settings all of a sudden disappeared. After two days of the disappeared settings my touchscreen turned unresponsive. I try many things to fix it but the only things that makes it responsive again is a hard push at the screen(lol) is there any other have the same issue? I'm thinking it's time for a replacement of my screen? Or is there any other solutions??
CloudGr said:
Hello everyone!! Before one week my fingerprint sensor stopped working! After two days of that troobleshoot my fingerprint sensor settings all of a sudden disappeared. After two days of the disappeared settings my touchscreen turned unresponsive. I try many things to fix it but the only things that makes it responsive again is a hard push at the screen(lol) is there any other have the same issue? I'm thinking it's time for a replacement of my screen? Or is there any other solutions??
Click to expand...
Click to collapse
Most of the time, this issue happens due to hardware issue, the screen/power button ribbon cables might've got loose inside the device.
I think its easy to repair in service.
Looks like cable tape broken. If screen not damage try go to service
GN-z11 said:
Most of the time, this issue happens due to hardware issue, the screen/power button ribbon cables might've got loose inside the device.
Click to expand...
Click to collapse
I have opened the phone yesterday and all seems to be fine inside maybe i have to replace my sensor.. about the screen it keeps be unresponsive....
boneszbo said:
I think its easy to repair in service.
Looks like cable tape broken. If screen not damage try go to service
Click to expand...
Click to collapse
Screen is in perfect condition not even a single scratch that's why I'm wondering why it keeps getting unresponsive untill i give a hard push...

Categories

Resources