Related
Hi guys.
I need some help. I updated to KK beta. I then tried to revert back to B125. somehow in the process i formatted everything and now i can not load any version of software. I only have the huawei recovery console. it keeps on telling me "installation aborted" when i try and install software.
Please help.
I do not have any software on the phone. what can i do to fix the problem?
Eject you sdcard, put a ROM in it and flash it through recovery. You have recovery right?
i get a installation aborted error when i try and recover. I have tried b111 b118 b120 and b125. same error. Which folder must the data be in? zipped or unzipped?
On the root of the sdcard, as a zip but flashable. Do you have stock or custom recovery? If it's stock put the update.app file in a folder called dload.Extract the update.app, put only that file in dload and press power and volume up/down all at once for a few seconds until it starts updating. Do not put the ZIP, only the file update.app.
tried and still not working. any other suggestions?
Do you have stock, custom or both recoveries?
Only stock revoery. had twrp installed but install the b118 stock recovery software. now im not able to install any software. phone is clean. no OS.
Well if you have stock recovery the update.app method must work. Do not put the zip in dload, only the update.app file. And repeat the 3 button method until it works.
Tried everything. nothing works
Dont connect usb when installing
He's right, unplug your phone while doing all of the above.
not connected via usb. is there any other way? any other roms to try?
Phone is fixed. thanks for the help
mr.f said:
not connected via usb. is there any other way? any other roms to try?
Click to expand...
Click to collapse
With stock recovery, not really.
mr.f said:
Phone is fixed. thanks for the help
Click to expand...
Click to collapse
what went wrong ?
mr.f said:
Phone is fixed. thanks for the help
Click to expand...
Click to collapse
Good.You are welcome.
how did you fix it?
warea said:
what went wrong ?
Click to expand...
Click to collapse
how did u fix it coz my phone has no os now and cant seem to install anything from recovery
Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Sennincito said:
Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Click to expand...
Click to collapse
Flash stock recovery through ADB
Sent from my P6-U00 using Tapatalk
what is the best stock firmware ? I mean what version ?
lookfor said:
what is the best stock firmware ? I mean what version ?
Click to expand...
Click to collapse
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
lootjelo said:
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
Click to expand...
Click to collapse
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Sennincito said:
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Click to expand...
Click to collapse
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
lootjelo said:
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Sennincito said:
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Click to expand...
Click to collapse
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
lootjelo said:
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Sennincito said:
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Click to expand...
Click to collapse
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
lootjelo said:
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Sennincito said:
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Click to expand...
Click to collapse
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
lootjelo said:
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I have removed my external copy and I left only my internal copy, the result is the same... FAIL
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
halman said:
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
Click to expand...
Click to collapse
Thank you halman, I did flash the recovery.img, however again FAIL.
Sennincito said:
Thank you halman, I did flash the recovery.img, however again FAIL.
Click to expand...
Click to collapse
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
halman said:
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
Click to expand...
Click to collapse
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Sennincito said:
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Click to expand...
Click to collapse
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
halman said:
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
Click to expand...
Click to collapse
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Sennincito said:
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Click to expand...
Click to collapse
I am sorry but I ran out of ideas..since you have stock recovery it should work.
If you dont have a nandroid backup I really dont know any other method to tell you besides the update.app.
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
Hope you fixed it already.
If not, try this.
http://dl.dbank.com/xhtml/link/resource.jsp?id=c01l4l4a2y&opt=101&e_r_auth=1&pid=38#
Put the downgrader in dload. After it is done, install your b125.
Make sure you thank @iwtfmcl who discovered it here:
http://forum.xda-developers.com/showthread.php?p=52164529
Sent from my P6-U06
bokchoi2020 said:
Hope you fixed it already.
If not, try this.
http://dl.dbank.com/xhtml/link/resource.jsp?id=c01l4l4a2y&opt=101&e_r_auth=1&pid=38#
Put the downgrader in dload. After it is done, install your b125.
Make sure you thank @iwtfmcl who discovered it here:
http://forum.xda-developers.com/showthread.php?p=52164529
Sent from my P6-U06
Click to expand...
Click to collapse
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
I installed recovery for b118 first and the boot.img and recovery from b506
so, my phones turns on, I can see the Huawei splashscreen. I can enter recovery as well. and my PC recognizes the phone.
My recovery wont install anything though.
So, can I flash some sort of recovery in this situation? Because I think that flashing the boot.img removed my ROM.
DrRammel said:
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
I installed recovery for b118 first and the boot.img and recovery from b506
so, my phones turns on, I can see the Huawei splashscreen. I can enter recovery as well. and my PC recognizes the phone.
My recovery wont install anything though.
So, can I flash some sort of recovery in this situation? Because I think that flashing the boot.img removed my ROM.
Click to expand...
Click to collapse
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
tileeq said:
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
Click to expand...
Click to collapse
I cant install anything. can I flash something with PC when I'm in recovery? I think my device works but I have no ROM and I cant flash anything.
I need to make the P6 work, please help..
DrRammel said:
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
Click to expand...
Click to collapse
I don't think you can use stock recovery to pick update.app from folder. You have to use 3 button power up method.
Just place update.app in dload folder on external SD card.
From the links i shared before you can get a dload/update.app that you need to put on sd card and update through the stock recovery before you try updating actual stock rom(4.2.2)
tileeq said:
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
Click to expand...
Click to collapse
The term local update refers to update that you do from working ROM, meaning you are able to go to System updates when ROM is running and choose Local update from SD card.
In this case it has to be done by what's called forced update, 3 button power up method.
I know what you all mean and i tried many times but it wont install anything now! First I got fail, I couldnt choose a updat.app even though it was on sd.
Now it doesnt even load the whole recovery...
And I dont have a rom, when I reboot I am stuck at splash screen.
And the 3 botton method didnt work, after that i selected from sd card but no luck..
is on its way to repair centre right now..
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
Hello !
Sorry to tell you, but from start you did a wrong step ! First if you was on OmniROM, you must flash ONLY stock recovery for KitKat and not for JB ! From here start all issues in your device !
To avoid any issue , when you use a custom rom based KitKat and you want to downgrade to JB , first you must put your device to Stock Huawei KitKat ( doesn't matter if is beta, B506 or B507 ) ! To install Stock Huawei KitKat - you must to flash stock recovery KitKat - and than flash UPDATE.APP from /dload folder ( where UPDATE.APP is stock firmware Huawei KitKat ) !
Now you should follow the intermediate steps to be able to downgrade to JB ( by installing aditional update.app )
Anyway good luck, and I hope you can solve this issue !
Edit :
You can try this stuff :
First, use your PC with a new microSD to copy UPDATE.APP ( from Huawei KitKat ) in /dload folder !
Go here and take stock recovery for Huawei KitKat ;
Put your microSD already prepared on your device and connect USB cable! Put your device in bootloader mode ( just keep pressing power button and volume down more than 10sec ) - now you should be able to flash stock recovery in your device > fastboot flash recovery recovery.img ; and reboot your device > fastboot reboot ! Right now you can reboot in stock recovery ( adb reboot recovery or using combo key ) and start flash UPDATE.APP !
surdu_petru said:
Hello !
Sorry to tell you, but from start you did a wrong step ! First if you was on OmniROM, you must flash ONLY stock recovery for KitKat and not for JB ! From here start all issues in your device !
To avoid any issue , when you use a custom rom based KitKat and you want to downgrade to JB , first you must put your device to Stock Huawei KitKat ( doesn't matter if is beta, B506 or B507 ) ! To install Stock Huawei KitKat - you must to flash stock recovery KitKat - and than flash UPDATE.APP from /dload folder ( where UPDATE.APP is stock firmware Huawei KitKat ) !
Now you should follow the intermediate steps to be able to downgrade to JB ( by installing aditional update.app )
Anyway good luck, and I hope you can solve this issue !
Click to expand...
Click to collapse
Thanks man for helping me out but I'm dumb, if I WAITED; i wouldnt have this problem...
#
anyway, I already sent device to huawei a few hours ago, I hope I'll get a new device, I have warranty still..
Thanks to all, now everyone can see how to downgrade!
DrRammel said:
Thanks man for helping me out but I'm dumb, if I WAITED; i wouldnt have this problem...
#
anyway, I already sent device to huawei a few hours ago, I hope I'll get a new device, I have warranty still..
Thanks to all, now everyone can see how to downgrade!
Click to expand...
Click to collapse
Ok, good luck !
This is the reason why I always recommended to use JB Rom with JB Recovery and KitKat Rom with KitKat Recovery - to avoid any issues! :good:
Hi Guys,
had the same issue today, but thank god i was still able to boot on a bugged omni room to copy file back and forth on my sd card.
But i still cannot find any way back to 4.2...
I tried the steps which surdu_petru write down but i still have the same error message
Checking Module Verlist...
Huawei SD card update fail.
Maybe i made a mistake but these were the steps that i tried:
I`m on the Omni Rom 4.4.2 right now with trwp 2.7.0.0
1. i prepared a microsd with the dload folder of the stock b506 from the huawei site
2. i flashed the stock recovery (B506) from THAT post
3. rebooted the phone and pressed volume plus and minus
4. and then the error message appeard
Maybe someone can explain me step by step how the downgrade works, would like to see the b125 stock on my phone
Thank you!
Sorry for my bad english
n00del said:
Hi Guys,
had the same issue today, but thank god i was still able to boot on a bugged omni room to copy file back and forth on my sd card.
But i still cannot find any way back to 4.2...
I tried the steps which surdu_petru write down but i still have the same error message
Checking Module Verlist...
Huawei SD card update fail.
Maybe i made a mistake but these were the steps that i tried:
I`m on the Omni Rom 4.4.2 right now with trwp 2.7.0.0
1. i prepared a microsd with the dload folder of the stock b506 from the huawei site
2. i flashed the stock recovery (B506) from THAT post
3. rebooted the phone and pressed volume plus and minus
4. and then the error message appeard
Maybe someone can explain me step by step how the downgrade works, would like to see the b125 stock on my phone
Thank you!
Sorry for my bad english
Click to expand...
Click to collapse
You should perform an intermediate step by installing a small update.app before to be able to downgrade to JB ! Solution a few posts above (try to read them all to see what you missed).
u mean that dload from that chinese download site? i tried to flash this with the same method like the stock B506 but it also fails.
l
n00del said:
u mean that dload from that chinese download site? i tried to flash this with the same method like the stock B506 but it also fails.
l
Click to expand...
Click to collapse
Since you have working ROM, try to flash that small update.app with normal update process via System updates-Update from SD card, if 3 button method fails.
what i tried:
1. omnirom 4.4.2 with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash Kitkat b506 -> failed
2. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash that small update app from this chinese site -> failed
3. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash stock b125 -> failed
4. omnirom 4.4.2 with trwp 2.7.0.0 -> flash b118 stock recovery -> reboot-> phone keeps vibrating and nothing works until i reflash trwp or kitkat stock
failed = Checking Module Verlist... Huawei SD card update fail
n00del said:
what i tried:
1. omnirom 4.4.2 with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash Kitkat b506 -> failed
2. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash that small update app from this chinese site -> failed
3. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash stock b125 -> failed
4. omnirom 4.4.2 with trwp 2.7.0.0 -> flash b118 stock recovery -> reboot-> phone keeps vibrating and nothing works until i reflash trwp or kitkat stock
failed = Checking Module Verlist... Huawei SD card update fail
Click to expand...
Click to collapse
You should try to wipe cache , data and dalvik-cache ( on twrp ) , than flash stock recovery in this way :
Reboot -> Bootloader ;
fastboot flash recovery recovery.img
press combo key to boot on stock recovery ;
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Boot and recovery are 4.2.2? or have something old? How can I check?
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
I had the same.
I put it in dload that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6...QZ5yrnedx4rug4
I managed to get back to 4.2.2
Now I installed 4.2.2 b610 vodafone dload method.
Boot and recovery are 4.2.2? or have something old? How can I check?
So i tried to wipe cache, data and dalvik cache on twrp 2.7.0.0 and rebooted into bootloader and flashed the stock KK recovery from the thread.
Then i booted my phone up into the stock recovery and it tried to flash the B506 dload with the same error.
I also tried to flash the small update.app without success
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
BeyondTheHorizon said:
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
Click to expand...
Click to collapse
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
mathius89 said:
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
Click to expand...
Click to collapse
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
BeyondTheHorizon said:
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
Click to expand...
Click to collapse
I left 30 minutes and never passed the Huawei logo ... No solution?
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
Well, you must look for a tutorial on how to flash stock recovery and install stock ROM again.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
did you wipe dalvik and cache ? if not try to do this in recovery, most bootloops are caused by this
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
Official firmware from Huawei. Has a many thread here in XDA.
Sent from my HUAWEI P6-U06 using Tapatalk
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
BeyondTheHorizon said:
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
Click to expand...
Click to collapse
Ok, when I can I will try. Thank you very much!
mathius89 said:
Ok, when I can I will try. Thank you very much!
Click to expand...
Click to collapse
You're welcome. Good luck and enjoy the new firmware.
My Huawei p6 is stuck at Huawei Ascend Logo screen or in TWRP menu.
Here is the history :
-From the stock Firmware, its been updated to B132 > B512 > B708
-TWRP installed and rooted.
-SD card partitioned and used Link2sd.
- Phone was working quite OKEY.
What Happened :
- I was fumbling with the phone, and accidently I used TWRP Advanced wipe (data, dalvik cache, system)
Now whats happening :
- Phone stuck at Huawei Ascend Logo screen
- If i press vol+ + vol - +power buttons, it goes to TWRP menu.
- in the TWRP menu, it shows NO OS INSTALLED at various places.
What I tried :
- I put the B708 zip file to SD card and tried flashing from TWRP.
md5 file not found, failed installing zip. FAILED.
- I tried B512 zip file too. same result.
Now the phone is always ON, in the Huawei Ascend Logo screen.
Note :
- I am not an expert user.
- The phone is not getting detected in windows.
How shall I get back to the B708 OS or atleast the stock firmware ?
ozshire said:
My Huawei p6 is stuck at Huawei Ascend Logo screen or in TWRP menu.
Here is the history :
-From the stock Firmware, its been updated to B132 > B512 > B708
-TWRP installed and rooted.
-SD card partitioned and used Link2sd.
- Phone was working quite OKEY.
What Happened :
- I was fumbling with the phone, and accidently I used TWRP Advanced wipe (data, dalvik cache, system)
Now whats happening :
- Phone stuck at Huawei Ascend Logo screen
- If i press vol+ + vol - +power buttons, it goes to TWRP menu.
- in the TWRP menu, it shows NO OS INSTALLED at various places.
What I tried :
- I put the B708 zip file to SD card and tried flashing from TWRP.
md5 file not found, failed installing zip. FAILED.
- I tried B512 zip file too. same result.
Now the phone is always ON, in the Huawei Ascend Logo screen.
Note :
- I am not an expert user.
- The phone is not getting detected in windows.
How shall I get back to the B708 OS or atleast the stock firmware ?
Click to expand...
Click to collapse
Are the files that you putting on sd card official update files or custom ones? Twrp csn only flash custom ones for the official you need stock recovery.
Sent from my SM-G850F
tileeq said:
Are the files that you putting on sd card official update files or custom ones? Twrp csn only flash custom ones for the official you need stock recovery.
Sent from my SM-G850F
Click to expand...
Click to collapse
Thanks for the support Tileeq.
The ROM file is
" B708_Repack_NeoArnet.V3". The one I used to update to kitkat 4.4.2, got from the XDA forum itself.
http://forum.xda-developers.com/ascend-p6/general/ascend-p6-b708-emui-3-0-international-t2991646
ozshire said:
Thanks for the support Tileeq.
The ROM file is
" B708_Repack_NeoArnet.V3". The one I used to update to kitkat 4.4.2, got from the XDA forum itself.
http://forum.xda-developers.com/ascend-p6/general/ascend-p6-b708-emui-3-0-international-t2991646
Click to expand...
Click to collapse
You cannot use TWRP to flash neoarnet's rom. It is an update.app file, so you need to flash the stock recovery onto your device, and then create a dload folder in the root of your SD card, and place the update.app file into the dload folder.
Do a local update using the Updater application.
miz_pimp said:
You cannot use TWRP to flash neoarnet's rom. It is an update.app file, so you need to flash the stock recovery onto your device, and then create a dload folder in the root of your SD card, and place the update.app file into the dload folder.
Do a local update using the Updater application.
Click to expand...
Click to collapse
Okey, That was quite an useful Info.
But How do I go back to Stock recovery ?
Updater Application is within the stock recovery I guess.. ?
ozshire said:
Okey, That was quite an useful Info.
But How do I go back to Stock recovery ?
Updater Application is within the stock recovery I guess.. ?
Click to expand...
Click to collapse
No, the updater app is on your home screen.
It might be called System Update, or similar, if you're not on Emui 3.0.
How did you install TWRP? The process is the same, except you need the stock recovery. I can't give a detailed description now, but there are many guides explaining the process.
i got the same problem, my phone ran out of battery and then put it to charge and got stuck on the android logo, i cant install any rom, it was updated to kk with emui 3.0, i put the dload folder on the sd card root and when i try to open it it only appears ../, and if i put the boot.img on the sd card root it tries to install the os but tells me e: signature verification failed and stop installing
miz_pimp said:
No, the updater app is on your home screen.
It might be called System Update, or similar, if you're not on Emui 3.0.
How did you install TWRP? The process is the same, except you need the stock recovery. I can't give a detailed description now, but there are many guides explaining the process.
Click to expand...
Click to collapse
I think I missed to tell you that, it seems the phone got no OS now. Its not going further the Huawei Ascend Logo screen at Startup. Then how shall i run the updater ? I am confused.
Or are you telling me that I should install the STOCK RECOVERY just like I did TWRP ?
Wont it be easier if I find a TWRP compatible ROM ZIP (kk, emui 3.0 ) ?
ozshire said:
I think I missed to tell you that, it seems the phone got no OS now. Its not going further the Huawei Ascend Logo screen at Startup. Then how shall i run the updater ? I am confused.
Or are you telling me that I should install the STOCK RECOVERY just like I did TWRP ?
Wont it be easier if I find a TWRP compatible ROM ZIP (kk, emui 3.0 ) ?
Click to expand...
Click to collapse
Yep, you did. And yes, I meant that you can install the stock recovery the same way you installed TWRP (using fastboot commands).
I just assumed since you already had that firmware, that you'd want to update to that, but yes, it will be easier to just install a ROM that that you can flash through TWRP.
Let me know how it goes.
miz_pimp said:
Yep, you did. And yes, I meant that you can install the stock recovery the same way you installed TWRP (using fastboot commands).
I just assumed since you already had that firmware, that you'd want to update to that, but yes, it will be easier to just install a ROM that that you can flash through TWRP.
Let me know how it goes.
Click to expand...
Click to collapse
I flashed emui_3.0_b709_by_oxalis_p6-u06_v04.zip this time. ( it was b708 before in the phone)
Using TWRP and the rom zip file.
It was a success.
But now there is no network !!!!! No sim inserted !!!
What happened ???