Code:
[COLOR="gray"]
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
[/COLOR]
Introduction
- SlimKat for the Amazon Fire Phone
Prerequisites for Installation
- Must be running Safestrap v4
Project Status
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
updated: 07 Jan 2016
Fresh Installation
- From Safestrap, go into Wipe Menu and Swipe to perform a factory reset.
- Installation in the Stock Slot is Mandatory
- Flash the ROM File
- Flash any 4.4 based version of Open Gapps of your choice - Except Aroma Version
- For ROOT access Flash the latest SuperSU package.
- Reboot
- If ROOT access still isn't working then see Question 1 on the Frequently asked questions to enable it.
- Enjoy!
Upgrading to new Version
- Flash the ROM
- Reboot
- Enjoy!
- If you previous had GAPPS it will be preserved automatically
- To preserve root between upgrades, you need to setup SuperSU to survive OTA updates.
Downloads
*** Please do NOT create any mirrors ***
- SlimKat for Amazon Fire Phone
- Open Gapps
Source Code
- Kernel Source: Kodiak stock kernel, build number update-kindle-35.4.6.6_user_466000820
XDA:DevDB Information
SlimKat Amazon Fire Phone, ROM for the Amazon Fire Phone
Contributors
ggow
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Safestrap v4
Based On: SlimKat
Version Information
Status: Stable
Created 2015-08-28
Last Updated 2018-01-01
Release Notes / Changelog
2018-01-01
- Ported relevant security patches up to December 2017
2017-09-18
- Fix display settings force close
- The download link allows access to all builds now
2017-09-09
- Relevant security patches up to August 2017
- Backport a lot of fixes from recent openssl libs
- Added lot's of compiler optimisation flags -O3 etc
- Ported translucent status bar
2016-01-26
- Fixed battery stats
- Updated SlimKat Code
2016-01-15
- Switch to using Amazon 4.6.6 US Binaries
- Fixed 5 GHz WiFi issue (Amazon 4.6.6 binaries)
- Update SlimKat Code
2016-01-12
- Xposed now installs correctly
- Updated SlimKat Code
2016-01-11
- Removed slim camera (use Snap Camera HDR or Open Camera)
- Fixed HDCP for wireless display
- Fixed compass, should now show the correct direction
- Improved GPS accuracy - needs testing
- Add voice-handset-hac entry to mixer_paths.xml from Stock 4.6.3 firmware
- Cleaned up build.prop
- Add launcher rotation setting to build.prop (disabled by default)
- Add lock screen rotation setting to build.prop (disabled by default)
- Making baby steps with Camera
- Now able to load the OV680 firmware but still no benefit at the moment
- NFC is now working
- Fixed bug which prevents phone from entering Deep Sleep Mode
- Remaining Stagefright fixes are included
- Updated SlimKat Code
- Updated OP with latest project status
- Changed project state from BETA to STABLE
2015/11/06
- Updated SlimKat Code
- Back port of signature faking to enable use of microG framework
2015/10/24
- Updated SlimKat Code
- [TBD] Next Release will include the Back port of signature faking to enable use of microG framework
2015/09/30
- Updated SlimKat Code
- In camera app, fixed upside down orientation for rear camera in portrait and landscape
- In camera app, fixed video recorder crashes
v2015/09/25
- Updated SlimKat Code
v2015/09/15
- Updated SlimKat Code
- Stagefright Vulnerability Fix
- Establish 3G/LTE connection faster
- Switched to using 4.6.3 binaries
v2015/08/28
- Initial BETA Release
Frequently Asked Questions
Question 1:
How do I get ROOT access?
Answer:
- Unlock developer options: "Settings" ➜ "About phone" ➜ Tap the build number 7 times
- Go back to "Settings" ➜ "Developer options" ➜ "root access" ➜ choose your desired option
Question 2:
Contribution by: @distearth
I am getting infrequent Google Play Service Crashes, what can I do to remedy this?
Answer:
- Some users have had success by installing this following version of Google Play Services
- Download: Google Play services 8.1.05 (2218116-036)
Awesome. I'm waiting for the download link to check it out. Keep up the good work ggow.
- Files links are now up on the OP
- Backup your existing ROM in case you want to go back
- Dirty Flash will NOT work
- Use the CleanSystemPartition.zip from Post #3 on the CM-11 thread if you run into issues with preserving of GAPPS.
- It can take a few minutes to acquire phone signal and then good to go.
Cheers ,can I dirty flash this on top of CM11 please
Sent from my Fire Phone using Tapatalk
hawsey said:
Cheers ,can I dirty flash this on top of CM11 please
Sent from my Fire Phone using Tapatalk
Click to expand...
Click to collapse
Answered on Post #5
Thanks
Sent from my Fire Phone using Tapatalk
ggow said:
- Files links are now up on the OP
- Backup your existing ROM in case you want to go back
- Dirty Flash will NOT work
- Use the CleanSystemPartition.zip from Post #3 on the CM-11 thread if you run into issues with preserving of GAPPS.
Click to expand...
Click to collapse
Does the dedicated camera button work to launch the camera app?
What does this mean exactly? "Lack of amazon source, see here."
Is there an option from within Safestrap to create a ROM backup?
What do you mean about the GAPPS preserving? I have never had an issue with Google Apps on CM before. So any more info would be helpful with that.
Thanks again!
Saix_XIII said:
Does the dedicated camera button work to launch the camera app?
Click to expand...
Click to collapse
- It works the same as it does in CM-11
Saix_XIII said:
What does this mean exactly? "Lack of amazon source, see here."
Click to expand...
Click to collapse
- Did you read the link?
- Basically NFC will not work without these patches
Saix_XIII said:
Is there an option from within Safestrap to create a ROM backup?
Click to expand...
Click to collapse
- Yes
Saix_XIII said:
What do you mean about the GAPPS preserving? I have never had an issue with Google Apps on CM before. So any more info would be helpful with that.
Click to expand...
Click to collapse
- Look at Post number 3 on the CM-11 thread
- Some GAPPS include a self preseve script to survive OTA update but sometimes this is not what you want
First, let me start off by saying I apologize if any of these questions are annoying you or any other user here. I just want to make sure I get a full picture of what I can and can't do with this ROM before I install it.
ggow said:
- It works the same as it does in CM-11
Click to expand...
Click to collapse
From what I can tell, by default it will not launch anything until you select the default camera via the lock screen. Is this accurate?
ggow said:
- Look at Post number 3 on the CM-11 thread
- Some GAPPS include a self preseve script to survive OTA update but sometimes this is not what you want
Click to expand...
Click to collapse
I would be installing this right out of the box tomorrow after I boot the phone up once to get the free year of prime and also get the needed items to do the slimkat install. Would you recommend I use the CleanSystemPartion thing first?
Basically doing the following steps in this order:
1. Install safestrap
2. Follow the instructions in the OP:
From Safestrap, go into Wipe Menu and Swipe to perform a factory reset.
- Installation in the Stock Slot is Mandatory
- Flash the ROM File
-Flash CleanSystemPartition
- Flash PA Gapps Modular PICO
- I believe SlimKat has SuperSU built-in if you want root
- Reboot
- Enjoy!
Is that what I should do or since I am doing a clean install without any previous version of Android and nothing added to the standard FireOS? Again, sorry if this is a stupid question, just want to make sure I cover all my bases.
Saix_XIII said:
First, let me start off by saying I apologize if any of these questions are annoying you or any other user here. I just want to make sure I get a full picture of what I can and can't do with this ROM before I install it.
From what I can tell, by default it will not launch anything until you select the default camera via the lock screen. Is this accurate?
I would be installing this right out of the box tomorrow after I boot the phone up once to get the free year of prime and also get the needed items to do the slimkat install. Would you recommend I use the CleanSystemPartion thing first?
Basically doing the following steps in this order:
1. Install safestrap
2. Follow the instructions in the OP:
From Safestrap, go into Wipe Menu and Swipe to perform a factory reset.
- Installation in the Stock Slot is Mandatory
- Flash the ROM File
-Flash CleanSystemPartition
- Flash PA Gapps Modular PICO
- I believe SlimKat has SuperSU built-in if you want root
- Reboot
- Enjoy!
Is that what I should do or since I am doing a clean install without any previous version of Android and nothing added to the standard FireOS? Again, sorry if this is a stupid question, just want to make sure I cover all my bases.
Click to expand...
Click to collapse
- Correct about the Camera Button
- Follow the Fresh Installation Instructions on the OP and the Safestrap thread for an out of the Box installation. So no need for the CleanSystemPartition.zip in your case.
ggow said:
- Correct about the Camera Button
- Follow the Fresh Installation Instructions on the OP and the Safestrap thread for an out of the Box installation. So no need for the CleanSystemPartition.zip in your case.
Click to expand...
Click to collapse
Awesome thanks a ton!
Now rocking SlimKat , looking great ggow , great work
Sent from my Fire Phone using Tapatalk
hawsey said:
Now rocking SlimKat , looking great ggow , great work
Sent from my Fire Phone using Tapatalk
Click to expand...
Click to collapse
- At the next opportunity would you mind giving the call MUTE functionality a test?
ggow said:
- At the next opportunity would you mind giving the call MUTE functionality a test?
Click to expand...
Click to collapse
I second this. It would be great to know! I usually use Hangouts Dialer to make phone calls on my phone, does that matter in terms of the mute button function or is it more of a ROM issue and not a specific app?
Saix_XIII said:
I second this. It would be great to know! I usually use Hangouts Dialer to make phone calls on my phone, does that matter in terms of the mute button function or is it more of a ROM issue and not a specific app?
Click to expand...
Click to collapse
- The MUTE function was definitely not working in CM-11, upon investigation it seems to be issue in the HAL. Again if I had Amazons system/core patches etc then I could fix this. I know how to fix it.
- It's likely that MUTE button still doesn't work in this ROM
- People have also been reporting that Hangouts Dialler was echoing in CM-11 rendering the app unusable. I think again in this ROM that problem could exist.
- The fix again would come from having those system/core patches
- Now that Amazon are not making phones for the moment at least - they should open source the whole lot - hell - if they did that and enabled me to complete the ROMs remaining features I'm sure then they could sell the rest of their vast stock with CM-11 or SlimKat on it
I have just tried a few calls testing mute .
1: Standard dialer , mute not working
2: Facebook messager calls mute working fine .
3: whatsapp mute working fine
Hope this helps
Sent from my Fire Phone using Tapatalk
ggow said:
- People have also been reporting that Hangouts Dialler was echoing in CM-11 rendering the app unusable. I think again in this ROM that problem could exist.
Click to expand...
Click to collapse
It is interesting you mention this, I have a Moto G currently and when I installed CM11 on it everyone I spoke to would hear an echo of their own voice. I thought it was my case because it would get better when I removed it. But sometimes it still happened. Another way I would sort of fix it was by raising the volume all the way to max and then lowering it to the desired level. What it made me think was the speaker was so loud that the mic would pick up their own voice. But when I updated to AOSP Lollipop a few months ago, no one had an issue with echoes in calls. So perhaps it is an issue with CM11 on some devices and Hangouts??
hawsey said:
I have just tried a few calls testing mute .
1: Standard dialer , mute not working
2: Facebook messager calls mute working fine .
3: whatsapp mute working fine
Hope this helps
Sent from my Fire Phone using Tapatalk
Click to expand...
Click to collapse
Any chance you can try Hangouts Dialer?? Thanks!
Hi , I don't know anyone that uses hangouts but I just installed it for you , my wife came up in contacts so I called her and on my screen it said calling but made no sound and her phone didn't ring , she hasn't got hangouts installed though
Sent from my Fire Phone using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
CyanogenMod is based on the Android Open Source Project and is made up for the most by the community.
This is an UNOFFICIAL build of CyanogenMod 12 for the galaxy fame S6810/B/I/P/... S6812/B/etc... So these builds should work for all the fame devices. You can flash it on another phone but I will not be responsible if you will cry with your brick phone.
This is only for testers who know how to report an logcat so we can find out problems and try to fix them.
DISCLAIMER
Code:
#include disclaimer.h
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, or dead SD cards,
* nuclear war, penguin invasions or that you are getting fired because the alarm app failed.
* before flashing it! YOU are choosing to make these modifications, and
* If you point your finger at me for messing up your device, I will laugh at you. Hard
*/
Installation instructions
First Time Installing an custom rom, flash CWM from corsicanu then flash mine. If you already have the one from corsicanu then you can flash now the compatible recovery for cm12
Install a compatible custom recovery: https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/view?usp=sharing
Download the zip
WIPE DATA/FACTORY RESET
Format/System
flash the rom zip from recovery
Flash gapps package or light gapps.
Reboot
Connect your phone to your pc and use adb to logcat and report it here.
Downloads
ROM Alpha 0.1
https://docs.google.com/uc?id=0B1u3mnq0nstfT2xLZzdSclk4RUU&export=download
GAPPS Download
http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
How do I logcat?
See this thread how to logcat it's very easy, I suggest to be also newb friendly to use the logcat apps.
http://forum.xda-developers.com/showthread.php?t=1726238
How do I enable Dual SIM?
To enable or disable, run the following command from adb or terminal emulator and then reboot. SIM Settings can then be found in Settings -> Multi Sim Settings
Option 2 which is the fastest one is to check out this app made by @Xenon92 it also has a nice UI, I hope it works on the fame else I will remove the link again:
https://github.com/xenon92/multisim-toggle/releases
Enable:
Code:
su
setprop persist.radio.multisim.config dsds
Disable:
Code:
su
setprop persist.radio.multisim.config none
Note that Dual SIM mode currently has the following limitations:
Both SIMs are always enabled (no way to disable one SIM)
"Receive incoming call while data is enabled" is always enabled
The QuickSettings tile will display the status for the currently selected SIM for data
There is no arrow activity indicator in the status bar.
Changing 2G/3G network mode using the QuickSettings toggle is not supported, only do it from Settings.
Changing 2G/3G mode in Settings may show too many options if the language used is not English. If more than 3 options is shown, only use the 3 top options (which will be WCDMA only/GSM only/WCDMA preferred regardless of the actual label shown).
3G may not work properly if Dual SIM mode is enabled with only 1 SIM inserted
Cannot set different ringtone for each SIM
Baseband version not displayed in Settings
Credits:
Google for Android before Cyanogenmod will slice them off.
The Android community for their contributions
Cyanogenmod for their Branch :good:
Dhinesh77 for his Corsica source which I use as base.
Pawitp for Patches
Xenon92 for collection and patch apply script
karthick mostwanted for some kernel tweaks/other stuff.
Corsicanu and Ramsudharsan for helping me/introducing me to the fame:good:
And all the betatesters and the fame community peope which are just too many to mention.
XDA:DevDB Information
Cyanogenmod12, ROM for the Samsung Galaxy Fame
Contributors
wulsic
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: A Galaxy fame
Based On: Cyanogenmod
Version Information
Status: Alpha
Created 2015-02-12
Last Updated 2015-02-12
FAQ/KNOWN ISSUES
Q. Can I upgrade from CM11 to CM12?
A. This is not recommended as this is an highly alpha and you have to wipe everything to upgrade with no problems from CM11 to CM12
Q. What recovery does this ROM support?
A. You must use a SELINUX enabled recovery from me or the one from corsicanu's recovery thread.
Q. Which GAPPS package should i install?
A. I suggest for good performance on your fame to install the Micro or Nano gapps package.
Q. Does it fully work?
A. No it's still an alpha and it will probably never work 100% as the Fame has 4.1.2 binaries it needs all kinds of patches to work properly and I don't have the phone itself to test stuff.
Q. When will the next build be released?
A. I can't answer your question as I also have my own private life.
STATUS REPORT OF THE BUILD
WORKING
WiFi
Rear camera
Touchscreen
Display
Everything else what isn't mentioned by not working.
NOT WORKING
Wrong density
Boot animation is small
random reboots
Sound not working
Microphone not working
Front Camera not working
Video Recording not working
RIL is not working
Home button wrong mapped.
Change Logs:
Alpha 0.2 FUTURE CHANGELOG
What will/attempt to be fixed in the next build:
Wrong density
Boot animation is small
Home button wrong mapped.
Sound not working
Microphone not working
Front Camera not working
Video Recording not working
RIL is not working
Alpha 0.1
Initial build.
the resolution is wrong. everything looks small
kapitnl said:
the resolution is wrong. everything looks small
Click to expand...
Click to collapse
Yes I know, I will fix it in the next version. Temporary fix, esdit the build.prop to dpi 160
This is just a highly alpha lollipop build. I will rebase my next build on my cm11 sourcecode. And I will collect patches needed for cm12 and fix some issues. In post #2 I have noted what will be probably fixed in the next build
thanks for your work, I hope the bugs are resolved in the next version, luck.
wulsic sorry but what already works sim? is that what happens is that I do not start me with the sim. I am from mexico, greetings !! (sorry, i`m not write english good :silly: )
MarioC. VEOLO said:
wulsic sorry but what already works sim? is that what happens is that I do not start me with the sim. I am from mexico, greetings !! (sorry, i`m not write english good :silly: )
Click to expand...
Click to collapse
Nope it doesnt work as it also has to do with the ril and thats gotta be fixed.
wulsic said:
Nope it doesnt work as it also has to do with the ril and thats gotta be fixed.
Click to expand...
Click to collapse
humm ok then expect your next version of cm12:fingers-crossed:
thank you very much wulsic
our telephony has another brightness thank you
@wulsic what do you think porting rom from samsung galaxy wonder rom ?
josuasinaga23 said:
@wulsic what do you think porting rom from samsung galaxy wonder rom ?
Click to expand...
Click to collapse
Nope will definitely not go, other gpu, other resolution, etc not much in common and I will not dirty port it as we can compile it. If there would be no source available then I would only dirty port stuff
thank you very much
thank you very much for the time you dedicate to the roms for the fame I look ances next vercion of cm12.
---------- Post added at 09:14 PM ---------- Previous post was at 09:05 PM ----------
cristian46 said:
thank you very much for the time you dedicate to the roms for the fame I look ances next vercion of cm12.
Click to expand...
Click to collapse
sorry I only speak Spanisham using a translator.
thank you very much for the time you dedicate to the roms for the fame I hope ancioso the upcoming vercion.
: Bueno:
so,here we go ,,,new thread
btw,,about home button ,.,,just remove something at generic.kl :3 ,,, key 102 WAKE_Home,,remove "Wake_"
Voila..works
Note:don't use any tweaks! ,,it's make the rom is slow ,don't know why :/
*Minecraft is not working << don't know why :/
the battery drain so fast ,maybe cause the animation ,but yeah ,,great performance
faizauthar12 said:
so,here we go ,,,new thread
btw,,about home button ,.,,just remove something at generic.kl :3 ,,, key 102 WAKE_Home,,remove "Wake_"
Voila..works
Note:don't use any tweaks! ,,it's make the rom is slow ,don't know why :/
*Minecraft is not working << don't know why :/
the battery drain so fast ,maybe cause the animation ,but yeah ,,great performance
Click to expand...
Click to collapse
Yeah I will also spend probably tomorrow sometime to disband my cm12 devicetree which I used? Happily I didn't uploaded it to github as it was just yeah... I will make a new cm12 devicetree tomorrow based on the cm11 devicetree which we have now atm. Supporting multiple devices sucks when applying patches
I don't know why the rom becomes slower, I only know that lollipop isn't perfect yet in Memory management. Waiting for 5.1 I rather prefer kitkat at the moment. Still can't get used to the statusbar etc really..
Could you logcat why minecraft isn't working?
Fix Sim Temporaly
This library fix temporaly the Sim card
Download the lib (libnetutils.so):
https:// mega.co. nz/#!sotRRTBa!PDe9AdQkbHX-ka3o2hpC7DBqd4XE0nsVAZGrBGs113c
Then, go to, System>lib and replace it! :good:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Here's a logcat (Sound, Microphone, Video Recording)
https:// mega.co. nz/#!1tMVAZzD!D3pQ8ZoAEIzEKlXcQIzHdBWJBDE_LZFhMiJ0JOUWv-A
(You have to remove the spaces of the links. I used google translator )
Thanks Wulsic by develop these amazing roms and all the time and effort you put him :laugh:
wulsic said:
Yeah I will also spend probably tomorrow sometime to disband my cm12 devicetree which I used? Happily I didn't uploaded it to github as it was just yeah... I will make a new cm12 devicetree tomorrow based on the cm11 devicetree which we have now atm. Supporting multiple devices sucks when applying patches [emoji14]
I don't know why the rom becomes slower, I only know that lollipop isn't perfect yet in Memory management. Waiting for 5.1 [emoji14] I rather prefer kitkat at the moment. Still can't get used to the statusbar etc really..
Could you logcat why minecraft isn't working?
Click to expand...
Click to collapse
Okay,I will do the logcat
Whej said:
This library fix temporaly the Sim card
Download the lib (libnetutils.so):
https:// mega.co. nz/#!sotRRTBa!PDe9AdQkbHX-ka3o2hpC7DBqd4XE0nsVAZGrBGs113c
Then, go to, System>lib and replace it! :good:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Here's a logcat (Sound, Microphone, Video Recording)
https:// mega.co. nz/#!1tMVAZzD!D3pQ8ZoAEIzEKlXcQIzHdBWJBDE_LZFhMiJ0JOUWv-A
(You have to remove the spaces of the links. I used google translator [emoji14])
Thanks Wulsic by develop these amazing roms and all the time and effort you put him [emoji23]
Click to expand...
Click to collapse
Let me try the sim card fix :*
Whej said:
This library fix temporaly the Sim card
Download the lib (libnetutils.so):
https:// mega.co. nz/#!sotRRTBa!PDe9AdQkbHX-ka3o2hpC7DBqd4XE0nsVAZGrBGs113c
Then, go to, System>lib and replace it! :good:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Here's a logcat (Sound, Microphone, Video Recording)
https:// mega.co. nz/#!1tMVAZzD!D3pQ8ZoAEIzEKlXcQIzHdBWJBDE_LZFhMiJ0JOUWv-A
(You have to remove the spaces of the links. I used google translator )
Thanks Wulsic by develop these amazing roms and all the time and effort you put him :laugh:
Click to expand...
Click to collapse
I will read later the logcats since it's 1:48 AM here now :l
Also where did you got that libnetutils.so from?
I couldn't test it myself and it was also a time ago when I was building CM12 so I don't remember or I included this patch or not:
https://gist.github.com/pawitp/5372673
I only want to say that I couldn't make the rom without the awesome work of pawitp, karthick, dhinesh, ramsudharsan, corsicanu etc also the great community See OP xd
But yeah screwing time away for making blind builds is my specialty
Post #1500 lol gotta celebrate that xd
wulsic said:
I will read later the logcats since it's 1:48 AM here now :l
Also where did you got that libnetutils.so from?
I couldn't test it myself and it was also a time ago when I was building CM12 so I don't remember or I included this patch or not:
https:// gist.github. com/pawitp/5372673
I only want to say that I couldn't make the rom without the awesome work of pawitp, karthick, dhinesh, ramsudharsan, corsicanu etc also the great community See OP xd
But yeah screwing time away for making blind builds is my specialty
Post #1500 lol gotta celebrate that xd
Click to expand...
Click to collapse
Hahaha, here is 10pm now
I used the library of cm11 to try to fix the sim
(I was bored and wanted to try)
Enjoy your post #1500 haha
About sim card,yeah it's works!!
alright ,the lib is working,,
i think maybe cause different size,,,CM11 lib has more size than cm12 :/
Hello everybody, I'm glad to share these days' work of bringing Marshmallow to the OnePlus One.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This ROM is based on CAF release LA.BF.1.1.3-00110-8x74.0, with some little modification to some components to make it build. The kernel is based on CM12.1. You can check the kernel source on my GitHub. Links will be posted later.
Nearly all basic feature should be working: 4G data, 4G->3G fallback on calls, SMS, camera/camcorder, BT, WiFi, MTP, 4K recording, HW decoding etc.
kexec hardboot is supported.
Known issues:
1. Stock camera doesn't work well. Here is a list of comparison:
Feature - Working on Stock camera - OppoCamera port - CameraNextMod?
Switching front/back cam - No - Yes - Yes
Camcorder <=1080p - No - Yes - Yes
4K Recording - No - No - Yes
Click to expand...
Click to collapse
(maybe I should get a monospace font in Firefox)
2. Battery drains... a little faster? (Just a little)
3. The ROM comes with ancient Launcher2. Launcher3 is not included. I will post this as an attachment. Launcher3 has been added since 20151018
4. Picture in apps are sometimes automatically zoomed out (and distorted) and can not be zoomed in. Is this a common problem among AOSP-based Marshmallow ROMs? I tried AOSP and CAF sources, and they both have the same issue. Need to change DPI via build.prop
5. Security related: SELinux is disabledpermissive in 20151018. HW Crypto is not working. Software-based credentials storage.
6. No gestures (DT2W etc) Workaround available in Q&A
7. Kernel panics/reboots on switching adb on & off.
8. WiFi AP still runs on 2.4G even when 5G is selected.
If you find more issues, feel free to post here. However, I may not be able to solve them since schoolwork is so heavy... And this ROM may not be updated regularly.
Video Tutorials by @udimars30:
https://www.youtube.com/watch?v=XxjnTae2nCM - How to install ROM and Gapps
https://www.youtube.com/watch?v=kWZcxVs992c - How to get root
https://www.youtube.com/watch?v=vZ7qW4j3Kso - How to enable softkeys, Now on Tap
Thanks!
Q&A:
1. Kernel Compatibility
The kernel of this ROM is based on CM12.1, but not exactly the same. You can not use kernels built for CM12.1 with this ROM. Marshmallow requires new features like updated SELinux, uid_cputime, etc, but CM12.1 source does not contain these features. You can take a look at commits and it will be clear.
Click to expand...
Click to collapse
2. Recovery Compatibility
I am using TWRP 2.8.7.0 with MultiROM support (TWRP_multirom_bacon_20150803-00.img from MultiROM thread). If you can not get the ROM installed properly, please try updating your recovery.
Click to expand...
Click to collapse
3. Rooting
Since this is a experimental build, I have turned off SELinux completely. SELinux is permissive. Just flash SuperSU 2.50 zip in the recovery and it will be fine.
Click to expand...
Click to collapse
4. F2FS Support
The kernel has F2FS driver builtin and corresponding entries in fstab file (as CM does). Vold has F2FS files as well, so you can give it a try. But I can not guarantee that it will work flawlessly.
EDIT: Some people tested and reported it not working. Make a backup before you try.
Click to expand...
Click to collapse
5. GApps
I'm using DeltaGapps with SetupWizard removed (yes it is the one that keeps force closing. you can disable that via adb as well). I think the lack of permissions(appops_whitelist.xml I guess) caused this failure. After allowing every permission required by Google apps and adding the account manually, Sync and Store works as expected. Now on Tap seems broken. Maps is working, and gets a lock in secs..
There are some other GApps package links in the first few pages. Some people say Now on Tap works with them, you can have a try.
Click to expand...
Click to collapse
6. Disabling HW Keys and Enabling Softkeys - The Easy Way
Code:
echo qemu.hw.mainkeys=0 >> /system/build.prop
reboot # enables soft keys
echo 0 > /proc/touchpanel/keypad_enable # disables hw keys, need to do this on every boot
Click to expand...
Click to collapse
7. Where Is The App Switcher?
If you are comfortable with softkeys, goto 6.
If you are not, goto 3 and take a look at http://forum.xda-developers.com/showpost.php?p=63313126&postcount=115double tap the home key.
Click to expand...
Click to collapse
8. LCD Density
Code:
wm density 440 # if you want 440
wm density reset # self-explanatory
Above will lead to corrupted pics.
Change
Code:
ro.sf.lcd_density=480
to
Code:
ro.sf.lcd_density=VALUE_YOU_WANT
(Note: I did this before installing GApps, not sure if this is related to Google Now Launcher FCs)
Click to expand...
Click to collapse
9. DT2W Workaround
Code:
echo 1 > /proc/touchpanel/double_tap_enable # do this on every boot
Then add this line to /system/usr/keylayout/Generic.kl:
Code:
key 255 POWER
DT2W has been added into settings since 20151027.
Click to expand...
Click to collapse
10. Apps Not Working
Settings -> Apps -> YOUR_APP -> Permissions -> Turn on everything
Click to expand...
Click to collapse
11. Fixing random freezes
http://forum.xda-developers.com/showpost.php?p=63378883&postcount=682
Thanks @The Dork Knight Rises
Click to expand...
Click to collapse
Now screenshot spoiler (with Google Now Launcher):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Discussion Thread:
http://forum.xda-developers.com/oneplus-one/general/discussion-homemade-android-6-0-t3227234
Download:
20151027
https://drive.google.com/file/d/0BwkmhbR5VHpAdWRxQ0ZraVgyT00/view?usp=sharing
Marshmallow's native DT2W setting (thanks CM)
USB MIDI support (What for?)
Fixed some crashes by removing SeempLog (try TiBu and network settings)
Double tap on Home key now brings up Recent View
Added a reboot option in power key menu/global actions menu
Note: if you have drain when NFC is on (or NFC setting is grayed out), please attach a logcat of booting process. I can not reproduce this on my phone... Thanks!
20151018
https://drive.google.com/file/d/0BwkmhbR5VHpAekdWT2NlVWNlNnc/view?usp=sharing
Mirror by @c43211 http://c43211.com/aosp_bacon-ota-eng.hamster-20151018.zip
Mirror by @Killer.shubham http://d-h.st/9fOO
Fixed network mode selection (2G/3G/4G switch)
Fixed network location
DT2W workaround: see Q&A
20151015
https://drive.google.com/file/d/0BwkmhbR5VHpAUVVDYkVJOFJoYVE/view?usp=sharing
Mirror by @itskapil at http://downloadmirror.co/android/tx/aosp_bacon-ota-eng.hamster.zip
Mirror by @Killer.shubham at http://d-h.st/3oBU
Mirror by @c43211 at http://c43211.com/aosp_bacon-ota-eng.hamster.zip
Thanks!
MAKE A BACKUP FIRST!
(I'm using TWRP 2.8.7.0 and it works well with this package.)
Sources:
Kernel: https://github.com/updateing/android_kernel_oneplus_msm8974 (marshmallow branch)
Device tree: https://github.com/updateing/android_device_oneplus_bacon
Blobs: https://github.com/updateing/proprietary_vendor_oneplus
local_manifest: http://www.hastebin.com/netamapate.xml
Hope you can enjoy the new feel of Marshmallow!
Wow! Need this rom to improve.
Excited flashing now!
Sent from my A0001 using Tapatalk
Finally the sweet taste of marshmallow on the OnePlus One!
Great work ! ^_^
Battery drains faster?
Guess I'll wait a little bit longer, as it's the main reason I wanna switch to M.
Kernel dilemma
If the kernel on it is based on cm 12.1 .. Can we flash any other kernels that work with CM 12.1? It should work or atleast i hope so! But yeah I'll try and get back!
Cheers! Keep up the good work!
Do we need to flash gapps & supersu?
Sent from my A0001 using Tapatalk
will it work with F2FS ? separate build would be helpful, if its not tested i will test it
---------- Post added at 11:06 AM ---------- Previous post was at 11:05 AM ----------
horizon_KJ said:
If the kernel on it is based on cm 12.1 .. Can we flash any other kernels that work with CM 12.1? It should work or atleast i hope so! But yeah I'll try and get back!
Cheers! Keep up the good work!
Click to expand...
Click to collapse
i guess it would be tweaked for more compatibility to android 6.0
Great work man !!
Anyone flashed it successfully?
Nice achievement! Glad to see you made it boot.
Finally the bacon.
Was almost regretting for getting this phone
~KV said:
Anyone flashed it successfully?
Click to expand...
Click to collapse
I'm on F2FS didn't tested it
Killer.shubham said:
I'm on F2FS didn't tested it
Click to expand...
Click to collapse
If you flashed it, go to terminal to see if it's on f2fs or not?
Finally ...!!!!
Will test soon ?
This Rom's developer is little busy so we should get other developers work on it and probably get this thread featured?
Tested and WORKING ( I don't if f2fs works)
as a reminder to everyone.. .NO ETA's pls. lets respect the dev.. compiling is already a good thing, and making it boot is a great achievement..
ianstump said:
Tested and WORKING ( I don't if f2fs works)
Click to expand...
Click to collapse
will report in 10 mins
1. flashing it without any custom kernel (probably wont work)
2.flashing rom zip + ak CAF kernel. (hoping for it)
..
Results
1. TWRP says no OS installed ( System is 22mb)
2.Flashing failed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Resurrection Remix ROM
Changelog
Installation
Downloads and useful linksAbout Resurrection Remix ROM
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
[font=Verdana, Arial, Helvetica, sans-serif]Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy![/font]
Special thanks to, the CM team,OMNI team ,SLIMROMS and of course to all the supporters
WIPAs this is the 1° released of CM13 for Quark this ROM may have features that are not full working.
So what I have tested and works, data, call, wifi, GPS, bluetooth, USB OTG and MTP, camera, Music/video app, Xposed, Gapps...
Included Main Features
- Check RR changelog and RR M Quark changelog
-ALL cm13.0 Features
-Check 3# and 4# post for screen shot of the features...
This ROM has safetynet verification Support of course when ROOT is disabled:
I develop a simple app to disable and enable SU at will, after disabling SU the user can pass safety net verification without having to remove SU.
I call it iSu XDA thread Click here
It works today only with CM 13 building SU binary it is present in almost all CM Base ROM.
Warning! There is a small implementation that need to be done to the kernel to have this working 100% the app will work on any device running CM base ROM but may loose ROOT support after a reboot if running without my kernel MOD.
Before install read this...
If you are using Any custom ROM that is not RR android Marshmallow 6.0.x you must do a clean install and fallow " Installation Instruction"
If you are using RR android Marshmallow 6.0.x you can do a dirty flash and fallow "Update Instruction" but if encounter problem do a clean install before report bugs...
Installation Instruction
- Download the latest build
- Download Gapps
- Take a TWRP backup
- Demanding - Clean install/Full wipe (Wipe, Dalvik, Data, Cache and System)
- Flash ROM using latest TWRP recovery
- Flash ROM + Gapps (clean install is demanding to flash ROM + gapps at the same time)
- Reboot to system.
- Enjoy!
Update Instruction
- Download the latest build of Resurrection ROM
- Take a TWRP backup
- Flash ROM using latest TWRP recovery
- Flash Gapps + any other zip you have flash before
- Wipe cache
- Wipe dalvik art
- Reboot to system.
- Enjoy!
Installation Files
Download ROM
Gapp's Recommended
Base on the latest users report the most stable is Banks, Opengapps some times is unstable if prefer Opengapps and have problem try a old version check the old Opengapps link
Banks
Opengapps ARM 6.0 Pico latest
Opengapps ARM 6.0 Old releases
TWRP
[url=https://github.com/ResurrectionRemix/android_vendor_resurrection/blob/marshmallow/CHANGELOG.mkdn]Changelog-RR[/url]RR M Quark changelog
Big thanks to:
XDA developers
CM team
Omni team
Slim rom
@Skrilax_CZ for his hard work on building cm-12/12.1/13.0 to this device
AND OF COURSE TO ALL THE SUPPORTERS, DONATORS AND USERS
Big thanks:
A big thank for those ho help me donating to my work.
XDA:DevDB Information
Resurrection Remix for Quark, ROM for the Motorola Quark XT1225, XT1250 and XT1254 -- Moto Maxx, Moto Turbo and DROID TURBO.
Contributors
baybutcher27
Source Code: https://github.com/ResurrectionRemix
Device Tree
Kernel tree
Vendor tree
Mod Kernel Adiutor tree
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CM, slim.omni and original Remix ROM builds
Version Information
Status: Stable
Created 2016-02-16
Last Updated check Download link
I port this help from my 5.x.x thread some things here may not be the same, I will update this with time
Etc App.
Motorola Apps:
I have included on the ROM the motorola-specific play store props and permissions allowing the user to install Moto apps via Playstore…
here the list:
Be Aware some app will not work
I have not tested Gallery because it conflict with theme app (please use another gallery app like QuickPick It gets integrated by camera app just like the default gallery.
Moto email, it install but doesn't let use the app.
Moto voice, it just not install.
All the rest available Moto app seems to be working.
Be aware I will try to fix this app on the future but i don't give any prediction of when, this is not my priority this is a CyanogemMod base ROM not a Motorola or google , any user can use google and search a way to fix this problem, if any one do let me know I will check and made the change so every one can have all available apps working.
My personal Wallpaper folder, to personalized you ROM it contains all most 1000 pics.
BLOATWARE remove List-Script for all Quark
Check my BLOATWARE remove thread to know what app is safe to remove from custom ROM and or stock, for custo I have made a script.
------------------------------------------------
Help:
Device specific bugs:
Below is more a general help then a device bugs because most users will not ever be notice any of this problem reported, so if encounter any problem try to read it all before reporting, if find any new bug or solution please report.
CM12.1/13 Bugs:
- This may have the same bug of CM12.1 or CM13.0 because this share a lot of source's, (if any one found a CM bug please report so i can check, because I may not keep track of reports there), some bugs of CM I have already fix but they may not be fix on CM, so do not expect to find every bug here, and if you are in doubt if one particular bug exist here, ask me I will check...
USB otg and MTP
USB otg and MTP change on Marshmallow if you are new at this please read before post.
After connect to your pc a notification will appear pull down the notification click on it and chose MTP
USB Otg can be read by any file app, but you must find it... It new location is in the root of the device in /mnt/media_rw
My advice is just to make a desktop shortcut from es file explorer to that folder... this way you can put that on a folder or any place of the desktop of the device and access quickly when is need.
Set selinux to permissive
Selinux is the police of the android it will block any service that is not know or allow (of course if the service/app has super su access it will not occur but some times do)
So by default it comes enable (enforcing), if you have a problem with some app service you may try set it to permissive to test.
Selinux can be change via kernel auditor plugin, or via settings>configurations>Miscellaneous.
Led:
-LPThemer Xposed module if enable the option (Enable Notification text color) under Status bar, the led doesn't work. May exist other modules or app that conflict with led notification...
DPI change
- The device will auto reboot when change the DPI that is not a bug.
Radio image
TWRP Flash zip of Moto SOAK XT1225 Radio images.
CM dev share all stock Radio image on CM thread but those need to be flash via bootloader.
GPS OR RADIO related problem:
Changing the ROM may cause GPS lock problem..
To solve is necessary to erase the radio status, that can be achieved via this zip "Clean_modem_status.zip" flash it via TWRP no wipe is need.
If find any problem related lost signal after, re-try the flash of "Clean_modem_status.zip", if the problem persist, flash latest radio.img version fia fastboot (aka via bootloader)
Code:
mfastboot flash radio radio.img
find the radio.img inside the stock ROM xml.zip, some xml.zip and fastboot for windows can be found here (click here)
Gestures/Ambient display:
- Pulse notifications, Wave and Pick-up, work very well, but is necessary to turn it off and on after 1° installation of RR, go to settings>Gestures> un-check and check to enable.
Random FC
- If encounter any FC, before make a report, try to clear data of the FC app, if that doesn't work, try to uninstall/install the app, and if that doesn't help try a clean install of the ROM if you didn't clean install the last update the ROM.
This is old and doesnot happens anymore on RR but I leave for the purpose of consulting.
On screen Navigation bar:
- After first boot you may see on screen navigation buttons, to remove it Settings>configurations>Buttons> un-check Navigation bar buttons....
Web Whatsapp CM bug Fix by CM dev.
Web Whatsapp works but if you try to loging the first time the image may be interlaced, that doesn't block you from loging, just place the device on the front of the screen at the same height of the QR and it will login.
Is possible to set the DPI to 480 ant this bug will not occur at that DPI.
Video apps Netflix HBO etc.
I'm particularly don't have this bug have teste youtube and netflix is all good, but was reported that this apps may not work for one user, the the fix is change a build.prop line:
persist.hwc.mdpcomp.enable
# GLES doesn't support secure display, to allow google play movies netflix
# and other apps that require a secure display we need to enable this
# but this cause screen fragments and glitch , this is a odd bug may not occur always, so is disabled by default
# to enable this change the false to true on the below line in the build.prop and to prevent screen bugs enable
# Disable HW overlays on developer options to not have glitch on the screen
persist.hwc.mdpcomp.enable=false
Waze motogeogence bug
If you use Waze GPS Social, Map... to not have problems is need to freeze a app before run the Waze app, the app to freeze is, MotGeoFenceSvc app or com.motorola.motogeogencesvc 1.0.1 (it has two names) in setting app you can't disable this app, to do that is need to use a root app like titanium backup or similar, or you can just remove the apk folder using a root browser remove the folder system/app/MotGeoFenceSvc.
------------------------------------------------
Changelog and updates:
Change log
! Changelog is inside the device device... Settings > About a phone > About Ressurrection> Changelog
I will be updating this weekly, will post on the thread warning on it update...
-------------------------------------------------
Bug report with in the most accurate description possible, do not spare words, screens and logs, a bug that i can't understand can't reproduce I can't fix.
Screenshots
On the attachment are the RR basic features, the features may change I will try to keep the pics up to date.
Next post more...
Screenshots
On the attachment more of RR basic features.
Currently in class, but I'm downloading now! Excited! I will be flashing it in a few hours. Can't wait.
I'm excited to test this out. Do I flash over my existing RR ROM or clean install?
Downloading now!
--
Moto Maxx - XT1225
Xposed RR Rom 5.1.1
Help
Thanks for the file!
But I have a problem when installing:
7 error error installing zip file
I would like to help me?
---
Moto Maxx - XT1225
Stock ROM
TWRP 3.0
Epic - Downloading...
I have an XT1250 currently running your 5.1.1 rom. I would install this and let you know of any bugs
Installed...running great. Did a clean install, i hate dirty flashing. I have Google 2 Step Verification, it didnt work on the initial setup but worked after the OS started up. I guess thats kinda irrelevant if you ask me. The interface looks a lot smoother than the 5.1.1 rom but mayb its just me. I would keep using and let you know. Ambient screen works great. LED is still broken tho. Ive learnt to live without lol.
Thanks man!!! u are the best
rafaelduim said:
Thanks for the file!
But I have a problem when installing:
7 error error installing zip file
I would like to help me?
---
Moto Maxx - XT1225
Stock ROM
TWRP 3.0
Click to expand...
Click to collapse
Clean install is demanding check 1# post instalation instructions...
Latiken said:
I'm excited to test this out. Do I flash over my existing RR ROM or clean install?
Click to expand...
Click to collapse
Clean install is demanding check 1# post instalation instructions...
kenennaoyeka said:
I have an XT1250 currently running your 5.1.1 rom. I would install this and let you know of any bugs
Installed...running great. Did a clean install, i hate dirty flashing. I have Google 2 Step Verification, it didnt work on the initial setup but worked after the OS started up. I guess thats kinda irrelevant if you ask me. The interface looks a lot smoother than the 5.1.1 rom but mayb its just me. I would keep using and let you know. Ambient screen works great. LED is still broken tho. Ive learnt to live without lol.
Thanks man!!! u are the best
Click to expand...
Click to collapse
Led doesnot work for you on 5.1.1? too.
Because is just fine on my device, I received a notification and the green led light up...
There is the chace that some app is couse that for you with I don't know...
:good:
My bad. Installing now.
baybutcher27 said:
Clean install is demanding check 1# post instalation instructions...
Clean install is demanding check 1# post instalation instructions...
Led doesnot work for you on 5.1.1? too.
Because is just fine on my device, I received a notification and the green led light up...
There is the chace that some app is couse that for you with I don't know...
:good:
Click to expand...
Click to collapse
Yeah it works..but the LED just stays green and doesnt pulse. and it looks like two LEDS with a divider in the middle. It looks a lil weird lol. Since i cant get it to pulsate, i just disabled it.
baybutcher27 said:
Clean install is demanding check 1# post instalation instructions...
Clean install is demanding check 1# post instalation instructions...
Led doesnot work for you on 5.1.1? too.
Because is just fine on my device, I received a notification and the green led light up...
There is the chace that some app is couse that for you with I don't know...
:good:
Click to expand...
Click to collapse
Thank you!
I managed to install. But my Moto 360 does not connect!
It will be a bug?
I installed it and used it for a few minutes before going back to L.
It's a good first test build but I noticed several bugs and things missing such as the Hardware buttons options.
Latiken said:
I installed it and used it for a few minutes before going back to L.
It's a good first test build but I noticed several bugs and things missing such as the Hardware buttons options.
Click to expand...
Click to collapse
you need to report the bugs if you don't I can fix it.
I have none, and my hardware keys are just were they always be, the ROM can't remove any hardware part.
A lot of things on Marshmallow are in different place, if your search for software keys it is call navigation buttons. :good:
made a USB otg and MTP help
USB otg and MTP change on Marshmallow if you are new at this please read before post.
After connect to your pc a notification will appear pull down the notification click on it and chose MTP
USB Otg can be read by any file app, but you must find it... It new location is in the root of the device in /mnt/media_rw
My advice is just to make a desktop shortcut from es file explorer to that folder... this way you can put that on a folder or any place of the desktop of the device and access quickly when is need.
rafaelduim said:
Thank you!
I managed to install. But my Moto 360 does not connect!
It will be a bug?
Click to expand...
Click to collapse
LG G Watch works fine for me...try to restart the phone and try again
kenennaoyeka said:
LG G Watch works fine for me...try to restart the phone and try again
Click to expand...
Click to collapse
Restarted the moto 360
baybutcher27 said:
you need to report the bugs if you don't I can fix it.
I have none, and my hardware keys are just were they always be, the ROM can't remove any hardware part.
A lot of things on Marshmallow are in different place, if your search for software keys it is call navigation buttons. :good:
Click to expand...
Click to collapse
Only thing I'm noticing that's gone regarding the hardware keys is the ability to change the backlight settings. Other than that, I haven't had any issues so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FreedomOS allows you to debloat your ROM smartly.
Everything is customisable, you can install the most minimalistic rom, like a fully modded rom.
So basically, it install the untouched stock rom and install and remove all the functionality you have selected in the aroma.
Features :
Install/Uninstall Google apps:
- Android Pay
- Calculator Google
- Calendar Google
- CallSync
- Camera Google
- Cloud Print
- Contatcs Google
- DialerFramework
- Dialer Google
- DMAgent
- Google Drive
- Exchange Google
- FaceDetect
- FaceUnlock
- Gmail
- GoogleTTS
- Hangouts
- Hotword
- Keyboard Google
- Messenger
- Package Installer Google
- Pixel Icons
- Pixel Launcher
- Photos
- Play Games
- Print Service Google
- Search
- Speech
- Storage Manager Google
- Tag Google
- Talkback
- Wallpapers
- YouTube
All the others apps have been removed
Install/Uninstall system apps :
- AntHal
- Android Pay
- Basic Dream
- Bluetooth Midi Service
- Bluetooth Test Mode
- Desk Clock
- Document (File Manager)
- Download
- EngineeringMode
- EngSpecialTest
- Facelock
- Galaxy
- Holospiral
- Animated wallpaper
- LogKitSdService
- Music
- Noise Feild
- OemAutoTestServer
- OEMLogKit
- OnePlus Camera
- OnePlus Gallery
- OnePlus OTA
- OnePlus Setup Wizard
- Phase Beam
- Protips
- SensorTestTool
- SwiftKey
- Tags
- WifiRfTestApk
- Dive Icons
- Rifon icons
- Enforcing kernel
- SuperSU | systemless 2.79 STABLE
- Xposed Installer Material | Flash the Xposed zip after the AROMA installation
- Adaway + hosts file
- Android Debugging Bridge
- Substratum Theme Engine Legacy
- Google DNS
- EmojiOne
- MultiWindows
- Patched Stock Kernel, disable force encryption and some tweaks.
- ARISE Sound System
- Google Assistant
Instructions :
You need an unlocked bootloader with TWRP.
- Install the latest official TWRP
- Download and copy the zip file in your OP3T
- Reboot into TWRP
- Make a nandroid backup (optionnal)
- :good: Clean flash Wipe data/system/dalvik/cache | Dirty Flash: Wipe System/Cache/Dalvik
- Install > Select FreedomOS zip file
- Enjoy aroma installer
- Done
"Can i dirty flash this rom ?"
Please, read the second post and the thread
Keep in mind, i do not have this device on my side.
OnePlus has stopped offer the OnePlus3T to the devs.
nevax one (Mirror 1) | AFH (Mirror 2)
Don't forget to put md5 file in the same directory of the the rom zip.
Like that TWRP will chack the integrety of the rom.
Changelogs
GitLab | Github (Mirror)
Enjoy what I do? Want to show your appreciation? You can donate HERE.
Special thanks to :
People who have donated to me to support ongoing development,
to all contributors ,
and of course all the beta testers.
Credits :
OnePlus for everything.
@Chainfire for SuperSU.
@amarullz for aroma project.
@rovo89, @DVD android for Xposed Installer.
@kickoff for the new aroma theme,
@xpirt for the python script.
@A.R.I.S.E. Sound Systems,
@xpirt for the python script
@YashdSaraf for the busybox binaries,
The Open GApps Project,
jcadduono for no-dm-verity script,
Maybe more people, tell me!
XDA:DevDB Information
FreedomOS for OnePlus3T, ROM for the OnePlus 3T
Contributors
NevaX1
Source Code: https://gitlab.com/Nevax/FreedomOS
ROM OS Version: 7.x Nougat
ROM Firmware Required: All included!
Based On: OxygenOS
Version Information
Status: Stable
Current Stable Version: 1.3
Stable Release Date: 2017-02-11
Created 2017-01-15
Last Updated 2017-02-27
Faq - readme
FAQ / README
If you can't find the answer here, use the search function!
Want to report an issue, a problem?
Please report it HERE, it much more handy compared to the forum.
Provide as much information as possible, the installation logs or logcat are important.
You can also suggest your ideas
What is the Google Dialer issues?
For now Google Dialer + Contacts still at his experimental state.
IMPORTANT: If you are perfoming a dirty flash with Google Dialer and your previous dialer was OnePlus Dialer, you will get issues with databases (force close, unable to access to some settings)!
Same if your previous was Google Dialer and want OnePlus dialer, do not mix different dialer.
So if you wan to switch your dialer, clean flash.
Read more here
Can i dirty flash this rom ?
Yes you can, but you need to do a wipe system, cache and dalvik.
Obviously, if you can make a clean flash do it, it's better.
Don't dirty flash if your previous rom was not FreedomOS or OxygenOS.
I got a bootloop caused by a incompatible/bad layer.
Boot into TWRP.
Go to Mount.
Select System.
Return to Home.
Go to Advanced.
Go to file manager.
Go to /system/vendor/overlay/ and remove the bad overlay apk.
Where is my SwiftKey?
Swiftkey icon is hidden with the OnePlus launcher,
Go to 'Settings > Language & input > Actual keyboard > Select keyboard'.
My installation is stuck at XX%.
Wait one or two minutes and touch two times at the bottom right of your screen.
The installation will end correctly.
If you got nothing, reflash the rom.
I'm stuck on boot logo after flashing stock kernel by myself
Flash SuperSU with unpatched kernel (provided in the zip file) or re-flash the rom with SuperSU.
I have unselected SuperSU in the aroma and now i want it.
Reflash the rom or flash the unpatched stock kernel available in AFH, and flash the latest SuperSU zip.
Tips :
For reducing the battery usage, i recommend to disable Viper4Android for the phone speaker for everyday usage.
The economy will minimal but we don't need an audio treatment for a simple *ding* notification.
Join the beta team !
We use Slack, just give me your email address in PM and i will send you an invitation to join the team.
Tell me if you have a linux system for building the rom, any virtual machine will do the job.
Screenshots : (outdated)
Review / How to:
XDA Review
Holy cow..!!
I thought I was drunk..
Welcome to the 3t forums mate.. It was a pleasure using ur rom in the 3..
geekynoob said:
Holy cow..!!
I thought I was drunk..
Welcome to the 3t forums mate.. It was a pleasure using ur rom in the 3..
Click to expand...
Click to collapse
Thanks you and welcome back
AFH mirror is now up!
Glad to see Freedom OS coming to 3T as stable
Good Luck
Holly Smokes this ought to be gooooooood.....I here nothing but positives from your users (I'm new my first Oneplus device, not new to custom ROMs).
Little confused if this is based on Nougat, yet Xposed is listed as a feature hmmmm how? However
Let the fun begin...
Thank you for the ROM mate, nice to see you here ?
Finaaaaaaaaaally.
Duncan1982 said:
Holly Smokes this ought to be gooooooood.....I here nothing but positives from your users (I'm new my first Oneplus device, not new to custom ROMs).
Little confused if this is based on Nougat, yet Xposed is listed as a feature hmmmm how? However
Let the fun begin...
Click to expand...
Click to collapse
Welcome, this feature is between strike tags for now
t-shock said:
Glad to see Freedom OS coming to 3T as stable
Good Luck
Click to expand...
Click to collapse
Thank you, glad to see you here too
teejayd said:
Thank you for the ROM mate, nice to see you here
Click to expand...
Click to collapse
Thanks you
thanx a lot
Does this rom support OTA updates?
My actually setup of my device OP3T
OOS 4.0.1 rooted SuperSU 2.79 format data f2fs,decrypted
My noob question is
Before flashing this Rom must formated data to ext4???In TWRP Recovery beta8
substratum ? 1080p 60fps record ?
---------- Post added at 09:13 PM ---------- Previous post was at 09:13 PM ----------
El-Lobo68 said:
My actually setup of my device OP3T
OOS 4.0.1 rooted SuperSU 2.79 format data f2fs,decrypted
My noob question is
Before flashing this Rom must formated data to ext4???In TWRP Recovery beta8
Click to expand...
Click to collapse
i am on ext4 i will flash this rom and give u a feedback
I'm guessing when you say between tags, this means it's not Active right now but will be when Xposed for Nougat is available, screenshots show V85 as working, Not a noob honestly lol just a bit baffled....
Now after a second perusal of the OP I see that the Screenshots are outdated Do'h yup we all get Homer moments lol
Duncan1982 said:
I'm guessing when you say between tags, this means it's not Active right now but will be when Xposed for Nougat is available, screenshots show V85 as working, Not a noob honestly lol just a bit baffled....
Click to expand...
Click to collapse
As you can see the screenshots are mainly outdated.
i'll update it one day
Failed installation. OP3T, Clean installation. Log: https://gist.github.com/CODeRUS/429181cdee76173d21cf33ba16edb229
Wow. Wasn't expecting this !!!
Is this a unified rom with the OP3 or a separate build ?
Stupid question.. if on 3.5.4 can I flash this or do I need to upgrade to 4.01 first?
Sent from my ONEPLUS A3000 using Tapatalk
coderus said:
Failed installation. OP3T, Clean installation. Log: https://gist.github.com/CODeRUS/429181cdee76173d21cf33ba16edb229
Click to expand...
Click to collapse
What's your recovery?
djr4x4 said:
Stupid question.. if on 3.5.4 can I flash this or do I need to upgrade to 4.01 first?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
You can flash it directly over it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FreedomOS allows you to debloat your ROM smartly.
Everything is customisable, you can install the most minimalistic rom, like a fully modded rom.
So basically, it install the untouched stock rom and install and remove all the functionality you have selected in the aroma.
Features :
Install/Uninstall Google apps:
- Android Pay
- Calculator Google
- Calendar Google
- CallSync
- Camera Google
- Cloud Print
- Contatcs Google
- DialerFramework
- Dialer Google
- DMAgent
- Google Drive
- Exchange Google
- FaceDetect
- FaceUnlock
- GCS
- Gmail
- GoogleTTS
- Hangouts
- Hotword
- Keyboard Google
- Messenger
- Package Installer Google
- Pixel Icons
- Pixel Launcher
- Photos
- Play Games
- Print Service Google
- Search
- Speech
- Storage Manager Google
- Tag Google
- Talkback
- Wallpapers
- YouTube
All the others apps have been removed
Install/Uninstall system apps :
- AntHal
- Android Pay
- Basic Dream
- Bluetooth Midi Service
- Bluetooth Test Mode
- Desk Clock
- Document (File Manager)
- Download
- EngineeringMode
- EngSpecialTest
- Facelock
- Galaxy
- Holospiral
- Animated wallpaper
- LogKitSdService
- Music
- Noise Feild
- OemAutoTestServer
- OEMLogKit
- OnePlus Camera
- OnePlus Gallery
- OnePlus OTA
- OnePlus Setup Wizard
- Phase Beam
- Protips
- SensorTestTool
- SwiftKey
- Tags
- WifiRfTestApk
- Dive Icons
- Rifon icons
- Enforcing kernel (security first)
- Permissive kernel if wanted
- APT-X & APT-XHD support
- SafetyNet pass
- Magisk 13 with Magisk Manager
- SuperSU systemless STABLE
- Xposed Installer Material | Flash the Xposed zip after the AROMA installation
- Adaway
- Android Debugging Bridge
- Substratum Theme Engine Legacy
- Google DNS
- EmojiOne
- MultiWindows
- Patched Stock Kernel, disable force encryption and some tweaks.
- ARISE Sound System with Enforcing support
- Sony Music Player
- Google Assistant
- Wideband wifi support over 2.4GHz
Instructions :
You need an unlocked bootloader with latest official TWRP.
- Make sure you are using the correct TWRP, read FAQ
- Download and copy the zip file in your OP5
- Reboot to TWRP
- Make a nandroid backup (optionnal)
- Clean flash Wipe data/system/dalvik/cache | Dirty Flash: Wipe System/Cache/Dalvik
- Install > Select FreedomOS zip file
- Enjoy aroma installer
- Done
If you have ROM issues please post the issue along with a LOG in this thread or in GitLab issue tracker.
Posts will be removed by moderators without warning if they do not belong or are not accompanied by a LOG
FreedomOS Mirror 1 [FR] - Mirror 1
@genesixx Mirror [FR/CA/SG]- Mirror 2
@xByt3z Mirror [NL]- Mirror 3
@casual_kikoo Mirror [NL]- Mirror 4 Down for the moment
Make sure to be updated to the latest version of TWRP, link in the FAQ.
Don't forget to put md5 file in the same directory of the the rom zip.
Changelogs
GitLab | Github (Mirror)
Enjoy what I do? Want to show your appreciation? You can donate HERE.
Special thanks to :
People who have donated to support ongoing development,
to all contributors ,
and of course all the beta testers.
Credits :
OnePlus for everything.
@kickoff for the aroma theme,
@Chainfire for SuperSU.
@amarullz for aroma project and the themes!
@topjohnwu for magisk
@rovo89, @DVD android for Xposed Installer.
@xpirt for the python script.
@A.R.I.S.E. Sound Systems,
@xpirt for the python script.
The Open GApps Project,
Maybe more people, tell me!
XDA:DevDB Information
FreedomOS 2.0.2 for OnePlus 5, ROM for the OnePlus 5
Contributors
NevaX1, casual_kikoo
Source Code: https://gitlab.com/Nevax/FreedomOS/
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Current Stable Version: 2.0.2
Stable Release Date: 2017-11-23
Created 2017-06-26
Last Updated 2018-03-22
Reserved
F.A.Q
How to pass SafetyNet?
- Follow the aroma installer, after that make sure to enable "Magisk Hide" in Magisk settings.
I can't pass wifi selection in SetupWizard
Sometime for a strange reason, the Google WebView provider isn't selected by the system. So try to reeboot else reflash the rom with Google Chrome.
Unable to mount /system partition
Boot into fastboot mode and type this command through adb:
Code:
fastboot format system
Magisk or SuperSU
Both are good to go, but depends of your need.
I have made a small comparaison, of course it does not contains all the criteria (different point of views are welcomed).
SuperSU:
A standard, compatible with almost all "rooted apps"
Break SafetyNet
Can increase battery drain
Magisk :
Include modules support (FOS include patched module for arise)
100% Systemless, do not break safetynet
Young project, some apps are not compatible
Which recovery should i use?
For now i can't recommand any stable twrp build, please follow the appropriate twrp thread for that
Want to report an issue, a problem?
Please report it HERE, it much more handy compared to the forum.
Provide as much information as possible, the installation logs or logcat are important.
You can also suggest your ideas
I'm getting an signal 11 Error at the end of the aroma installer
You have ticked to rebvoot your device at the end of the installer, and it just fail.
This is not a problem, just reboot it into twrp.
Can i dirty flash this rom ?
- You can dirty flash if u're using my previous version, but if anything wrong, a clean flash before reporting is a must.
I got a bootloop caused by a incompatible/bad layer.
Boot into TWRP.
Go to Mount.
Select System.
Return to Home.
Go to Advanced.
Go to file manager.
Go to /system/vendor/overlay/ and remove the bad overlay apk.
My installation is stuck at XX%.
- Wait one or two minutes and touch two times at the bottom right of your screen, if you got nothing reflash the rom.
I have unselected/selected a setting in the aroma and now i (don't) want it.
- Reflash the rom
Tips :
For reducing the battery usage, i recommend to disable Viper4Android for the phone speaker for everyday usage.
The economy will minimal but we don't need an audio treatment for a simple *ding* notification.
Reserved
Join the beta team !
We use Slack, just read my signature.
Review / How to:
XDA Review
Video review by @savadam
How to install by @savadam
Antutu by @savadam
first great job mate
genesixxbf3 said:
first great job mate
Click to expand...
Click to collapse
You don't even have the device.
So, real first.
Nice to see you there @NevaX1 !
YEAH!!!! Great job
casual_kikoo said:
You don't even have the device.
So, real first.
Nice to see you there @NevaX1 !
Click to expand...
Click to collapse
no need
Where's the faq link
Yes! My favorite ROM! Love seeing you here Nevax1!
Great to see you so fast!!
I'll do my job and share your rom in 'the' french forum you do know ( http://forum.frandroid.com/topic/258641-liste-roms-et-mods-du-op5/ )
Don't forget ..
NevaX1 said:
Instructions :
- Download and copy the zip file in your OP3
Click to expand...
Click to collapse
Good luck!
Nice to see you here @NevaX1
Watching this space
genesixxbf3 said:
first great job mate
Click to expand...
Click to collapse
What a kid
Thanks!
casual_kikoo said:
You don't even have the device.
So, real first.
Nice to see you there @NevaX1 !
Click to expand...
Click to collapse
Thanks, happy flashing my friend
rockafellor said:
YEAH!!!! Great job
Click to expand...
Click to collapse
Thanks!
Rebel7022 said:
Where's the faq link
Click to expand...
Click to collapse
Updated, some refresh will be done in a near future
rage77 said:
Yes! My favorite ROM! Love seeing you here Nevax1!
Click to expand...
Click to collapse
Thanks, you are welcome
néonaloj said:
Great to see you so fast!!
I'll do my job and share your rom in 'the' french forum you do know ( http://forum.frandroid.com/topic/258641-liste-roms-et-mods-du-op5/ )
Don't forget ..
Good luck!
Click to expand...
Click to collapse
Thanks!
FrAndroid is for me the french forum but i still don't understand the grouped thread
Good to see you here for the OnePlus 5
Not booting for me, dirty or clean just loops back into twrp?
passion8059 said:
Not booting for me, dirty or clean just loops back into twrp?
Click to expand...
Click to collapse
Make sure to use the latest twrp from @Xdevs23
Also if your system your system cannot be mounted, check the faq.
NevaX1 said:
Thanks!
FrAndroid is for me the french forum but i still don't understand the grouped thread
Click to expand...
Click to collapse
Well, the fact is, that we a few people for a ton of roms to test, so it couldn't be possible to create a thread for each and every rom... So we made the unified tread, where we can talk about everything regarding roms, mods, how-to flashing it, etc...
Not difficult to understand
NevaX1 said:
Make sure to use the latest twrp from @Xdevs23
Also if your system your system cannot be mounted, check the faq.
Click to expand...
Click to collapse
Latest recovery (59) from him, clean flash with magisk and i can't even reach the bootanimation, it boots me back to TWRP.
EDIT: Clean flash with SuperSU working, these rumors about Magisk isn't compatible with decryption are true.
néonaloj said:
Well, the fact is, that we a few people for a ton of roms to test, so it couldn't be possible to create a thread for each and every rom... So we made the unified tread, where we can talk about everything regarding roms, mods, how-to flashing it, etc...
Not difficult to understand
Click to expand...
Click to collapse
This is why i have leave this forum.
Unreadable and it's a real mess, especially for the new users (still my point of view).
Installed and seems to be running nice and smoothly! Great job dev!
@NevaX1 thank you for your great rom, i have test all roms for OnePlus 5 (even HydrogenOS lol) and your rom seem be the most custom/advanced rom with xXx. I will test and feedback soon
PS:Great idea to have remove encryption by default
PS2: Why you purpose old version for Magisk & SuperSU, it's a mistake in the presentation?