Hello Guys
After doing deep search on this forum and try several unsuccessful solutions (recover mode, fast boot...). I decide to create new thread.:angel:
Symptom : A boot loop on Android Upgrade (There are 7 updates to apply).
I think, I know the cause but every solution found on this forum didn't succeed.
I tried to access recevey mode ( Power+Up, then release up ). --> When I release Up after vibration, I don't enter into recovery mode.
I tried to access my phone through fastboot or adb but, I have following message : "Wait for device". No detection so
Here is what I have done to be in this situation :
I've rooted my phone (thanks to forum explanations) --> No Problem
Installed this bull**** app "App Master" to freeze or put bloatware into trash (recoverable)
Everything was ok, since I noticed "Asus Start Manager" needed to update but was not compatible with my device. Strange isn'it.
So I've undertaken to restore frozen and removed app from app master. It asked me to restart and then, my 7 restored app seems to involve a big mess.
And now I can't Boot. NOte that android upgrade wants to suprisingly update 7 optimisations.
My next idea is to acces directly internal storage to remove 7 apk provoking boot loop.
Do you have better idea because if I remove internal storage, wararnty will be canceled and in addition I have no guaranty I'll able to read it.:crying:
Further more I hesitate to send it to vender since my device is rooted. They will answer it's my fault, and it's true sic !
As you understand I 'm quite desperate . IF someone can help me I'd be so grateful.
Thanks everybody and sorry for my english
Can you access to bootloader?(Power+ Vol Up and release power after vibration)
Sent from my Asus Zenfone 2 using XDA Free mobile app
atahanali_57 said:
Can you access to bootloader?(Power+ Vol Up and release power after vibration)
Sent from my Asus Zenfone 2 using XDA Free mobile app
Click to expand...
Click to collapse
Unfortunatly no.
bouhhh !!
Try to see here http://forum.xda-developers.com/zenfone2/general/unbricking-research-unbricking-method-t3162848
Ok i'll try it after work this evening.
I have nothing to loose so....
can u let me know. I failed with it.
U should have been able to access the boot loader at least.
while pressing and holding the volume up button , press and hold the power button until the set vibrates.
just when u feel the vibration RELEASE THE POWER BUTTON, NOT THE VOLUME UP BUTTON, 9as u have mentioned the oppssite in the first post) then it should go to boot loader menu.
I have a similar problem with ZF2. I access recovery mode by pressing the down arrow key and then the power button but the phone just reboots into recovery mode again. No dead android logo appears as others have suggested.
Try that : http://forum.xda-developers.com/showthread.php?t=3191244
Do volume up + power, once it vibrates press volume down rapidly about 3 times. Wait for a minute or two while on the Asus screen. Sometimes it will boot into recovery or it will vibrate and stay stuck. It worked for me.
A workaround
Hello Guys !
I've posted a workaround to my problem but I don't understand why it doesn't appear. I certainly made a mistake something.
Here is what I remember:
I tried several procedure described on asus-zenfone.com I finally found a soft which unlocked my recovery mode.
But finally it was maybe the fact to connect my device with usb which unlocked It (sorry I don't remember)
Once recovery menu was available, I downloaded official rom, copied it on an sdcard and installed it.
Good news, most of bloatware were desactivable !
Now, I have a device rid of the unworthy softs with an offical ROM.
In such situations I usually disassemble the phone and disconnect the power train of a few minutes. After that it booted recovery/bootloader.
croulipette said:
Hello Guys !
I've posted a workaround to my problem but I don't understand why it doesn't appear. I certainly made a mistake something.
Here is what I remember:
I tried several procedure described on asus-zenfone.com I finally found a soft which unlocked my recovery mode.
But finally it was maybe the fact to connect my device with usb which unlocked It (sorry I don't remember)
Once recovery menu was available, I downloaded official rom, copied it on an sdcard and installed it.
Good news, most of bloatware were desactivable !
Now, I have a device rid of the unworthy softs with an offical ROM.
Click to expand...
Click to collapse
how to do that? i still cant access recovery or fastboot
my phone is stuck in robot hijau with stomach openning position sleep with exclamation mark please help me.........
atahanali_57 said:
Can you access to bootloader?(Power+ Vol Up and release power after vibration)
Sent from my Asus Zenfone 2 using XDA Free mobile app
Click to expand...
Click to collapse
I am able to access bootloader . But when i choose recovery mode, the phone enters into a boot loop.
. Here is what i have done:
1. My device was already rooted.
2. Tried to install twrp custom rom using usb adb commands
3. It showed successful. I fast booted into my device. Switched it off and entered boot mode again. then selected Recovery. But I was never able to enter into recovery (The Robot with error was not at all displaying).
4. Then i searched google and found my boot loader was locked. I unlocked bootloader using
https://dl.xda-developers.com/3/4/0....zip?key=dEgXp67KVlqwn4BL-w1kWw&ts=1505837086
5. Now my flash screen is in white background. I can enter boot loader.
6. Then again i installed twrp via adb and selected recovery mode. But when i choose recovery, the phone goes into boot loop.
Please help.. One doubt: MY Phone is ASUS ZENFONE 2 Z00AD.
Related
Need some help please !
First of all I'm stuck in bootloop with my nexus 7 2013 (not unlocked). So I pluged my N7 in my computer (windows 7) to flash the Rom. I also have a problem with the driver when I connect my N7 to the computer and I get the message (MTP device failed ). So I've tried to install manually new drivers from Google but it says that my drivers are up to date ??? Now It seems that it's impossible to flash my N7 if my computer doesn't recognize my device.
What is the best thing to do now
thanks in advance
claude
Clodio69 said:
Need some help please !
First of all I'm stuck in bootloop with my nexus 7 2013 (not unlocked). So I pluged my N7 in my computer (windows 7) to flash the Rom. I also have a problem with the driver when I connect my N7 to the computer and I get the message (MTP device failed ). So I've tried to install manually new drivers from Google but it says that my drivers are up to date ??? Now It seems that it's impossible to flash my N7 if my computer doesn't recognize my device.
What is the best thing to do now
thanks in advance
claude
Click to expand...
Click to collapse
Well, it looks like you have a couple of things going on. I can't remember how I got windoze to recognize the n7, but it had something to do with deleting the driver then plugging the n7 back in and letting it install the driver again. I remember I had to play around with the thing for a little while. Trying to update the driver wouldn't work for me either. As, far as the bootloop, you could try this one click tool: http://forum.xda-developers.com/showthread.php?t=2381582 Finally, you could try wugfresh's toolkit if you want to take the lazy route. It actually works pretty well. It might even help with that driver issue. http://forum.xda-developers.com/showthread.php?t=2389107 you don't use it to install a rom, but you do need to install a custom recovery and the toolkit could help with things like that. I personally use the toolkit to return a tablet or phone back to factory condition, lock the bootloader, etc...
You could also try to do a factory reset from the stock recovery. That fixed a boot loop for me after unlocking my bootloader.
Problem solved
I finally contacted Google Canada Monday morning and spoke with with a tech. Wow...very impressed by the service and my problems are now solved. First we went to Recovery mode ( Power and volume down) in that mode you then press again power and volume up and release at the same time. Then,from that menu you can now swipe all data and it solves the Bootloop problem. Finally I reinstalled all my app and back to normal. I pluged my N7 to my computer and now no more driver problem....
Thanks
Claude:laugh:
Clodio69 said:
I finally contacted Google Canada Monday morning and spoke with with a tech. Wow...very impressed by the service and my problems are now solved. First we went to Recovery mode ( Power and volume down) in that mode you then press again power and volume up and release at the same time. Then,from that menu you can now swipe all data and it solves the Bootloop problem. Finally I reinstalled all my app and back to normal. I pluged my N7 to my computer and now no more driver problem....
Click to expand...
Click to collapse
That's what I was referring to in my post, sorry for not giving a more detailed explanation.
Glad to hear you that you had a good experience with Google support and that you solved your problem. :good:
Thanks for giving feedback and have lots of fun with your N7!
Hello!
I'm stuck in a loop boot too. I flashed without wiping... I try to boot in recovery mode but it's impossible. The combination vol up, down and power doesn't work. It tries to boot as usual so starts in a loop again.
Sent from my Nexus 4 using Tapatalk now Free
frozst said:
Hello!
I'm stuck in a loop boot too. I flashed without wiping... I try to boot in recovery mode but it's impossible. The combination vol up, down and power doesn't work. It tries to boot as usual so starts in a loop again.
Sent from my Nexus 4 using Tapatalk now Free
Click to expand...
Click to collapse
Let me get this straight....are you trying to hold volume up & down at the same time? If so, you cannot please both volumes at the same time. Also, to boot into the bootloader (same as fastboot, not recovery) is power + volume down. The easiest way to do this is to hold volume down, then press and hold the power button. If the tab was on, and the screen goes black, let go of the power button, but keep holding the volume down button. It should boot into the bootloader soon enough.
1. Push volume up and power button for 5 seconds then release the power button.
2. Do a complete wipe of the system and reinstall the system.zip again and reboot.
If it doesnt load the recovery do this.:
1. Hold volume down and power button for 5 sec. Release the power button and volume once you enter the download screen.
2. Use odin in your Pc to install the rom you want or stock rom.
(3. If you installed stock rom go back to the steps I wrote at the top and flash a new rom)
Remember that you need to be rooted.
OK so I was trying with the wrong combination.
With both vol up/down + power worked.
I restored and it's up and running again.
Thanks!
Sent from my Nexus 4 using Tapatalk now Free
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
is b125 the newest one for the international version?
7OOKA said:
is b125 the newest one for the international version?
Click to expand...
Click to collapse
Yes, its latest.
Sent from my HUAWEI P6-U06 using xda app-developers app
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Does it everytime when you power up the phone? I sometimes had this issues, but then i turned the device off and on again and everything was fine
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
edit: i cant boot to recovery too (vol + and power button) it only reboots to the logo and stuck on that
7OOKA said:
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
Click to expand...
Click to collapse
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
husen4u said:
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
no luck
7OOKA said:
no luck
Click to expand...
Click to collapse
This is a longshot but since you dont have warranty you might give it a try.
Remove the back of the phone (there are tutorials on youtube for "disassembling ascend P6") and then remove the battery inside. Afterwards connect the phone to your ac charger, and retry to force update (power button while holding vol + and - buttons).
I really dont know if this works, but when i bricked my other huawei phone (u8800) where the battery was removable I managed to restore it using the aforementioned method..
Best of luck!
I had same problem last week, press volume up/down when phone boot. and keep pressing those buttons.
Dosnt work every time.. download firmware first and add it to external sd/dload folder..
i think i lost my stock recovery, i dont know why but i think that happened, but can anyone tell if the loss of the recovery will lead to the failure of force update? (in my case it won't start at all just stuck at logo)
if that happened i might try reflashing stock recovery with fastboot
ok i tried to flash stock recovery via fastboot, but the problem is my pc only reads my device when i connect it to it then hold power and vol - buttons till it reboots, then my pc reads it as an adb interface but it shows that it failed to install device drivers although i already installed the usb drivers and updated google usb drivers from android sdk, and everytime i try to flash recovery via adb (fastboot flash recovery recovery.img) it stuck with waiting for device
it seems its not recognized properly, am i hard bricked? :crying:
same problem with ascend mate
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
ens1986 said:
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
Click to expand...
Click to collapse
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Thanks
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
7OOKA said:
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Click to expand...
Click to collapse
ens1986 said:
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
Click to expand...
Click to collapse
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
7OOKA said:
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
Click to expand...
Click to collapse
ens1986 said:
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
Click to expand...
Click to collapse
not sure to be honest
823834511
Hey your file actually worked. Just tried couple of times and it worked.
Thanks a lot you are life saver
7OOKA said:
not sure to be honest
Click to expand...
Click to collapse
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
same prob
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
Same problem as OP, and I can not get into download mode either. If I do as above, it still goes on booting .
saeidzzz said:
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Click to expand...
Click to collapse
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
you are a life saver!
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
I thought I was going to have to factory reset my phone like other forums suggested and lose everything. Thanks to your suggestion I was able to get out of recovery reboot loop. Thank you!
Thanks for your help, you are a lifesaver lol! I saved so much money and time because of you. Have a great day
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
But how to enter recovery it still says set warranty bit recovery
i am facing problem with set warranty bit: recovery in samsung J5 model...
samsung j5 500f
i have the same problem when i flash twrp recovery..any solution ????
Ghats normal
Sent from my SM-N900T using XDA-Developers mobile app
My Fix
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
ulop3z said:
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
Click to expand...
Click to collapse
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Tmobilefan906 said:
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Click to expand...
Click to collapse
The phone is fine now, it was just stuck on the loop and spamming home was the only way out, its fine now I've had no problems and it boots up fine
This happens...
This happens to almost everyone at some point of time. There is no need to worry as you just need to flash recovery like TWRP or CWM. To shed some light on this issue... boot loops mainly happen when you uses the incorrect version of software with your ROM or stock firmware. By using youtube you can look at the videos of your phone model and find the recovery version number needed.
For anyone who has a Note 3 T-Mobile phone who is still stuck! I am willing to make a video to show how to fix this and provide all the firmware/version numbers + links in one bundled location to make it easier.
ALL PHONES ARE VERY specific... ONLY USE THE CORRECT FIRMWARE FOR YOUR MODEL PHONE
Again, if you have a Samsung Note 3 T-Mobile, model number SM-N900T and are still lost. Let me know so I can shot a video and bundle files needed.
---------- Post added at 08:44 AM ---------- Previous post was at 08:38 AM ----------
cdresor said:
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
Click to expand...
Click to collapse
Don't be scared by this... just choose the correct versions before blindly trying to install a ROM. Also, only use links from main sources if you dont fell like auditing the code!
Hi guys, sorry for might be late about helping you now years later... But recently I've found something interesting about fixing this issue.
*****
Fix: (100% working in Galaxy Grand Prime SM-G530H)
UPDATED: More detailed info!
# Before flashed Recovery or Root:
1. Root device using Odin or any other rooting known workaround.
2. Backup Recovery (optional), and Kernel using Rashr (available on PlayStore).
3. Flash Custom Recovery (TWRP), using Odin PC software or TWRP android app.
4. Flash backed-up Kernel.img file to Boot partition using TWRP install section.
5. Reboot system (It may take a few time to boot)
# After flashed Recovery or Root: (accidentally or without knowing)
1. Search online and download your exact Phone Stock Kernel.
2. Follow *before flashed* above ↑ from 3rd.
Bonus info:
Even after flashing TWRP, you might be able to Boot device yet, by going to TWRP → Advanced → Reboot system. (It bypass bootlooping to Recovery, while: “Set Warranty Bit : Recovery”).
That's all! Try at your own, then share it!
Please help lg g 3 won't enter custom recovery I've tried all button variations
Please someone help I have a rooted g3 and don't wanna brick it?????
Go into an adb terminal and type in
Code:
adb reboot recovery[/quote]. If you don't have adb, search up minimal adb and fastboot, and how to use it.
Sent from my SM-N9100 using Tapatalk
On computer or phone?
Sent from my VS985 4G using XDA Free mobile app
And my phone already has twrp, just can't access it from device being off, but twrp app lets me go to recovery, just not when phone is off. So this should fix that right?
Sent from my VS985 4G using XDA Free mobile app
Please someone help
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Well it should be as simple as holding down power and volume button down things but i guess you've already tried that method many times and it didnt work so you ask then, right?
If your phone in bootloop, you can flash tot files and it will back to stock re-root and re-install trwp.
If your phone still (or already) normal, you can download an app that can take you to custom recovery such as rebooter or power menu, thats it.
Yea phone isn't in bootloop, but if I put a Rom on phone I have no way to access the recovery because the volume and power won't take me to the recovery, so if it goes into bootloop I'm outta of luck I don't understand why the hardware buttons won't take me to the recovery, have you ever heard of this problem
brozillatyler said:
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Click to expand...
Click to collapse
How long are you holding the vol down and power buttons? It should be around 15-20 seconds, then your system recovery screen comes up, you choose factory data reset, yes, and then TWRP comes up. If that isn't working - are you sure your buttons are working OK?
If the phone is turned off is there any other way to access it while phone is off?
Yes buttons work fine I hold it down and it just goes to Verizon screen ?
Actually when I hold it down it just stays on logo and reboots back to logo over and over and over
Actually I hold it down and it reboots to logo over and over its like there's no recovery there I don't understand lol
If anyone has any ideas or thoughts on how to fix this please let me know
brozillatyler said:
If anyone has any ideas or thoughts on how to fix this please let me know
Click to expand...
Click to collapse
OK... Does your phone boot into your ROM at all or are you bootlooped? If your phone boots, download an app called flashify and get the proper twrp .img file for your model and flash the image using flashify. It's an easy app to use - just make sure you're using the correct twrp .img for your phone...from here: http://forum.xda-developers.com/lg-g3/orig-development/recovery-twrp-touch-recovery-2-8-2-0-t2966129
If you are bootlooped I would suggest starting over and reflashing back to stock using the tot or kdz method. Here is a guide: http://forum.xda-developers.com/verizon-lg-g3/general/restore-verizon-to-stock-t2827878 I know it can be a pain to get the download tool working properly sometimes, so it may take some effort to get it working, but be patient (and read a lot if you get stuck) and you will get it working.
I don't know how you got borked...maybe it was an un-bumped twrp image? Either way, it is what it is, just try not to do it again Good luck.
Thanks much I'll try this
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
jared1992 said:
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
Click to expand...
Click to collapse
I tried this also not working how did you fix it?
brozillatyler said:
I tried this also not working how did you fix it?
Click to expand...
Click to collapse
Hmm. That worked for me. I'm not sure what next.
Hello Everyone,
I have a Redmi 6 Pro, with Chinese stable rom installed. My phone is stuck at MI logo at startup. I didn't do anything abnormal with it.
I can only access the Fastboot mode by pressing Vol down and power button. And nothing else. Pressing Vol up and power or pressing all buttons at once doesn't do anything, (Just goes to the logo screen and stays there.)
I am trying to reinstall the same rom using Fastboot method (Since it's the only way, I can't access recovery mode). but it's bootloader is locked. And I can't unlock it using the MI flash unlock tool. Because it requires modifying developer settings in phone, which I can't access.
I tried other unofficial method to unlock bootloader but it didn't work because that requires recovery mode. (Which I can't access.)
Please someone help me how do I unlock the bootloader, or just fix the phone any other way. I will be very glad if someone helps me get my phone running.
One more thing, I don't have any customer services center where I am right now, so that's out of the question.
EDIT: Sometimes (but rarely), the "Powered by Android" message also appears but then it stays there.
If you need any other information, Just ask me.
Thanks in Advance.
same issue here only fastboot option. tried edl/test mode but can't bypass edl authentication.
Rajeshsupernova said:
same issue here only fastboot option. tried edl/test mode but can't bypass edl authentication.
Click to expand...
Click to collapse
Seems like no one wants to reply.
My Mobile After Update Startup With After Mi Logo Automatic Show Recovery Mode
Lucius_47 said:
Hello Everyone,
I have a Redmi 6 Pro, with Chinese stable rom installed. My phone is stuck at MI logo at startup. I didn't do anything abnormal with it.
I can only access the Fastboot mode by pressing Vol down and power button. And nothing else. Pressing Vol up and power or pressing all buttons at once doesn't do anything, (Just goes to the logo screen and stays there.)
I am trying to reinstall the same rom using Fastboot method (Since it's the only way, I can't access recovery mode). but it's bootloader is locked. And I can't unlock it using the MI flash unlock tool. Because it requires modifying developer settings in phone, which I can't access.
I tried other unofficial method to unlock bootloader but it didn't work because that requires recovery mode. (Which I can't access.)
Please someone help me how do I unlock the bootloader, or just fix the phone any other way. I will be very glad if someone helps me get my phone running.
One more thing, I don't have any customer services center where I am right now, so that's out of the question.
EDIT: Sometimes (but rarely), the "Powered by Android" message also appears but then it stays there.
If you need any other information, Just ask me.
Thanks in Advance.
Click to expand...
Click to collapse
What happens when you try to unlock with official unlocker? u get error message or something? Also try to press power button and volume button continuously, let it reboot like that two three times, then leave power button as soon as u see the screen lighting on but keep pressing vol + till u see recovery. see if that takes u to the mi recovery, if it does then wipe data from recovery