Hi all,
please help me, even a factory reset did not work. After turned on, the Ascend logo will come on and it gets after Android logo appears. I have no experience with android, so as detailed iexplanations/ instructions as possible would be very very much appreciated!
thanks a lot!
Katrin
Nobody has any suggestion//? please!
I went to a shop and they couldnt tell me what the problem is.
You could try flashing a custom recovery via adb from a pc, I would suggest looking around at old p6 Q&A threads I did have an old thread with detailed instructions and links for all the old downloads, then try flashing another rom via the twrp recovery.
Related
Hi,
I'm new to Android devices. Yesterday I tried to flash Cynogenmod, downloaded from Official site and followed the procedure as mentioned. But after completing all steps and flashing ROM it stuck on loading "CYNOGENMOD" logo and not loading into OS. I removed the battery and tried to restart the device but same problem again. Can someone please tell me what is the reason and how can I solve it. Thank You.
My ascend P6 had 4.2.2 version and I had run the TWRP CMD Installer V1.1.3b, unlock boot locker, jelley bean recover and working well. Finally, I had run install stock kitkat boot.img and my phone got stuck in Huawei logo,
Please someone help how to get out, I am pretty new to ascend phone and no idea at all, many thanks and greatly appreciated,
I'm really new to this, hopefully someone can help me. I rooted my phone via method 3 in the Zenfone 2 resources thread. I didn't want to update but the phone downloaded it and I thought it might be ok. The phone updated and got stuck in a bootloop. I believe the update was Z00A 2.19.40.22 ( it was like 34mb?). I read all the threads I could and came to this one. I downloaded the preroot image Z00A 2.19.22 because in my recovery at the top ,it said that was what was on it now. Did I make a mistake there, should I have downloaded an older preroot image? I followed all the directions on recovering from a bootloop ( This thread http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835. The phone booted up after the install and I was able to go through the setup. The phone suddenly froze though and I restarted. It gets past the Asus logo and then is stuck at a black screen with the green led blinking. What do I do from here? Is the phone just dead now? Is there a possibility of saving it?
More info- Before downloading the preroot I did try to factory reset from recovery. I was still stuck with bootloop. If anyone can help me I would really appreciate it a lot.
Hi dear friends and android lovers.
I have a S4 mini LTE model GT-i9195L, it is the latin american model. It was on 4.4.2 Kitkat android version. Phone was working fine, everything was ok, it was only rooted and it´s like a year and a half old. Suddenly it doesn´t not start anymore, I was using it when I put the phone on a table and never become to life again. Phone seemed to back to life because it had a bootloop, it stuck on the start screen where you see the phone model, and also it can enter to download mode, but in recovery mode it can´t do anything. I tried to flash TWRP and CWM through odin, but doesn´t work, and the last thing that I tried was to flash a stock ROM but it also revive the phone, and now it´s on a hard brick. I know it´s a hard brick, because I repaired a S3 with the same problem, I know how to do the process, but I can´t find a Debrick image for my cellphone. I don´t know even if I can use a debrick image from a gt-i9195 ´cause the "L" means it´s a little bit different phone, but if anyone can solve my doubt about this i will really appreciate.
Any help will be really helpfull.
Thanks in advice.
Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum linked below.
http://forum.xda-developers.com/galaxy-s4-mini/help
The experts there may be able to help. Good luck.
Hello. I have been using Note 2 GT N7100 for over 3 years now. Have rooted the phone and was running a Crdroid custom ROM on it. It did not give me any problem. Nor did I update the ROM since it was running good.
Suddenly yesterday it got stuck on the Samsung logo. Tried restarting it, but it didn't move ahead of the logo.
Today, it shows a grey and white screen. Fully blurred and can't see the Samsung logo too.
Tried going into the recovery mode, but same grey screen appears.
If I take it in download mode, it goes there. But when I try to install any stock ROM, it doesn't work. It shows failed in Odin.
Please help what can be the possible problem?
If any more information is needed, I will provide it.
Any ROM to install or custom recovery?
Please guide what to do?
Also, I am sorry if there is already some post like this. Please let me know
Thanks in Advance!
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
harsh09046 said:
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
Click to expand...
Click to collapse
Hey thanks for the quick reply. Will try and get back to you.
Need a valid link for Recovery Package
[I moved this post to this section that's more apropriate http://forum.xda-developers.com/showthread.php?t=2154890 ]
Hi guys,
Is there a link for the Recovery Package/ROM ? (the one above doens't work)
My phone is stuck on the boot logo and I need to fix it... (I'm a bit noobish..)
I've had already downloaded those files but i'm not sure that there are the correct files to use in the step 4 of this tutorial (Recovery Package/ROM).
- N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
- N7100XXUFND3_N7100OXAFND3_XEF.zip
Thank you a lot !
Mimo_0