My kernel would have only what's needed. However users can request a feature and if i find it worthy i would test it and add.
I am keeping short and writing the features i have added so far !
FEATURES:
V 1.4 : [ As of now only CM based ]
Switched to latest CM13 source base
Voltage control
More refined sandy charger control
Tuned elementalx governor
Darkness governor
Kcal tweaks
FIOPS & SIO added
Compiled with latest uber toolchain
Other tweaks from my end
V 1.3 :
FIOPS scheduler added
Tuneups to interactive governor
Changes to elementalx and it's tunables.
Solves potential MTP mode USB issues and sound issues.
Full synapse support added ( Doesn't directly come inside from my kernel. You will have to flash separately ). Thanks to @yarpiin
More thermal changes
Lot more in store
To download synapse flashable zip refer third post
Please install CM camera next mod which is also available under downloads section. Just install it as normal apk. Hotplug has video rec freeze on stock OP camera. Blame Oneplus for it.
V 1.2 :
Sandy charger control. Now charge your op2 much faster than stock ( Use synapse or updated kernel adiutor app [available in my downloads,not playstore of kernel adiutor] to enable it and control )
Intelliplug. Use it wisely and according to ur usage
Initial support to synapse ( The bulk needs to be still controlled via Kernel Adiutor )
Initial attempt at porting Faux Sound control ( It's not working completely yet. Will be fixed soon )
Merged with latest Oxygen 2.1 source
Plenty of other features hidden.
Initial release :
Compiled with Sabermod gcc 4.9 toolchain
Powersuspend with different modes
USB Fast charge
Intelligent cpuquiet hotplug framework ( Based on NVDIA and tuned to msm )
ElementalX governor from flar ( with latest patches )
Kcal control ( colour control driver by savoca )
Fsync on/off support
BFQ I/O scheduler added
Thermal code tweaked heavily ( device should stay at it's coolest )
Optimized for best performance and battery ( you can get some of the best results )
Smoothness guaranteed
Rcu,sched,mm and other various enhancements
There are plenty more hidden ! Just use and experience the kernel. Don't forget to post your reviews
I can only say that you can get one of the best experiences with probably no real bugs !
Recommended app :
Kernel Adiutor by grarak
Downloads :
Sandy kernel for One Plus two
Installation guide :
Download the zip
Reboot to recovery ( custom recovery )
Flash the zip
Enjoy sandy kernel on one plus two
Credits :
@grarak - For the code base and for his time. Nice guy to speak with
And to everyone else, whose code i have used.
Tester credits :
@Skybark - For testing. Nice guy to speak with as well. Thanks mate !
XDA:DevDB Information
Sandy Kernel for One plus two, Kernel for the OnePlus 2
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/sandy_oneplus2_msm8994
Kernel Special Features: [Fast Charge] | [ Elementalx] | [Darkness ] | [ Ice cool thermal]
Version Information
Status: Stable
Current Stable Version: 1.4
Stable Release Date: 2016-02-25
Created 2015-09-04
Last Updated 2016-04-28
FAQ's
Q : Will this work on all ROM's ?
A : It will work bugless in Oxygen OS, but could give you bugs in CM or CM based ROM's ( as they are under alpha stage )
Q: OMG ! Baettaryyy SUCKZ ! STAPH putting lame kernels
A : My kernel is intended for battery and performance. I have no intention to build a kernel for battery draining. Your drain comes from your location apps,wake locks,etc. Use App ops or servicely app and check damn wakelocks & keep awake of your apps ( Play services, Maps, facebook,etc )
Q: What governor do you suggest ?
A : I have included only one governor ( elementalx ) other than stock and hence i would suggest you switch to it if it's not pre-switched after flashing.
Synapse link
Synapse flashable zip
Tested and all I can say is to flash that s#it!!Smoothness overloaded.Awesome power management!
5* rating
Tapped from my ①+②=❸
Well looks good but you havent stated is it for CM12.1 or Oxygen ?
Will it work with CM12(BETA) and Oxygen OS 2.0.2?
yarpiin said:
Well looks good but you havent stated is it for CM12.1 or Oxygen ?
Click to expand...
Click to collapse
Works great on OOS 2.0.2!
ebanreb37 said:
Will it work with CM12(BETA) and Oxygen OS 2.0.2?
Click to expand...
Click to collapse
Tapped from my ①+②=❸
Great !!! will try
Reserved for my tweaks.. Thanks for the kernel.
From lettuce with LiquidSmooth ROM and Sandy Kernel
vaisakh7 said:
Works great on OOS 2.0.2!
Tapped from my ①+②=❸
Click to expand...
Click to collapse
camera force close, mp3 error, all big cores always on?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
No issues!Camera works fine,MP3 works fine,cores are shut down on light usage(thanks to CpuQuiet hotplug).
Tapped from my ①+②=❸
Works great~~ still testing the fast charge~ tho is it possible to have westwood tcp congestion or others perhaps?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
You mean you face this ?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
Seems like a recurring theme with these early OP2 kernel attempts..
return.of.octobot said:
Seems like a recurring theme with these early OP2 kernel attempts..
Click to expand...
Click to collapse
These are not there in this kernel ! [ He was just questioning if it is there ]
Santhosh M said:
These are not there in this kernel ! [ He was just questioning if it is there ]
Click to expand...
Click to collapse
Gotcha, definitely appears to be the most competently developed one we've seen thus far.
Am I to assume that the lack of included governor list indicates that it's the same as stock? I could really dig me some smartmax..
return.of.octobot said:
Gotcha, definitely appears to be the most competently developed one we've seen thus far.
Am I to assume that the lack of included governor list indicates that it's the same as stock? I could really dig me some smartmax..
Click to expand...
Click to collapse
Heavily tweaked elementalx should satify your needs
Tapped from my ①+②=❸
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
Can you verify if this is true?
ebanreb37 said:
Can you verify if this is true?
Click to expand...
Click to collapse
This isn't true.I've been a tester and I can assure that these issues doesn't exist!
Tapped from my ①+②=❸
vaisakh7 said:
Heavily tweaked elementalx should satify your needs
Tapped from my ①+②=❸
Click to expand...
Click to collapse
does elementalx efficient in terms of battery?
Related
Lightning kernel
this kernel is made for cyanogenmod 11 roms and i take no responsibility if you brick,destroy your device due to this kernel
features
sound control 3.2
gpu overclock to 533mhz
intelli thermal
cpu overclock upto 1836mhz(disable mpdecision)
compiled with linaro 4.9.1
added intelliactive,intellidemand and preservative governors
row,fiops io schedulers
undervolting
sweep to wake and double tap to wake
fast charge
auto mpdecision (turn off stock qcom mpdecession)
sound stuttering fixed(zzz sound while hearing music)
Motorola MSM memcpy enhancements
cpu unallingnment access
kernel mode neon
fast charge
more to come
source code https://github.com/nikhil18/android_kernel_sony_apq8064
installation instructions
flash the zip in recovery
for extreme overclocking disable qcom mpdecision
Setting custom GPU Voltages via sysfs
NB:
- Safe lock is present on MIN/MAX values:
Quote:
#define GPU_MIN_VDD 900000
#define GPU_MAX_VDD 1200000
The default GPU voltages are:
Quote:
+ [VDD_DIG_NONE] = 0,
+ [VDD_DIG_LOW] = 975000,
+ [VDD_DIG_NOMINAL] = 1075000,
+ [VDD_DIG_HIGH] = 1175000
Verify the actual settings:
Quote:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
975000
1075000
1175000
Adjust to desired values and verify:
Quote:
echo "930000 1000000 1100000" > /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
compatible roms
carbon rom
beanstalk rom
AICP kk rom
aokp rom
cm11 rom
more testing needed
credits
doomlord for kernel building instructions
jeroenqui for meow kernel
cyanogenmod for kernel source
Tommy-Geenexus
faux123 - For almost all kernel features
XDA:DevDB Information
Lightning kernel, Kernel for the Sony Xperia ZL
Contributors
nikhil18
Source Code: https://github.com/nikhil18/android_kernel_sony_apq8064
Kernel Special Features:
Version Information
Status: Testing
Created 2014-07-29
Last Updated 2014-11-20
sony 233 blobs.
version 1-added intelliplug,gpu overclocking,linux patch to 103,kernel mode neon,motorola memory optimizations(paranoid android experimental builds) .
version 2(new blobs)-removed intelliplug.added autosmp,627mhz gpu overclock
version 6-added row sched,500ma charging for unknown chargers,fast charge,disabled some debugging for better performance,fixed sound stuttering if its there,intellithermal and multirom patch.
stock rom .283
version 1 released for stock roms .283 based on same source and same features from cm11 and you need to be on stock kernel before installing this kernel
downloads- http://forum.xda-developers.com/devdb/project/?id=5175#downloads
Looks promising please add a Stock version, i love GPU overclocking
cnkhanh said:
Looks promising please add a Stock version, i love GPU overclocking
Click to expand...
Click to collapse
if this kernel boots then i will try adding stock version
nikhil18 said:
if this kernel boots then i will try adding stock version
Click to expand...
Click to collapse
I :laugh::good::good:
Awesome!
nikhil18 said:
can any one please upload latest cm11 boot image so that i can extract the ramdisk and compile
Click to expand...
Click to collapse
Here you go:
https://www.dropbox.com/s/fh3i56oipv5ru6x/boot.img
(nightly of today: cm-11-20140729-NIGHTLY-odin)
version 1 uploaded here http://forum.xda-developers.com/devdb/project/?id=5175#downloads
Is booting without any problems. Underclocked to 196 and everything seems to be working.
And the best thing: The annoying soundbug is gone!
Where can I buy u a beer?
sualfred said:
Is booting without any problems. Underclocked to 196 and everything seems to be working.
And the best thing: The annoying soundbug is gone!
Where can I buy u a beer?
Click to expand...
Click to collapse
i do developing just for fun because i have lots of free time and i dont need money
*throwig thanks to the monitor*
Wow, thanks a kernel for CM
Awesome, nice to see a new kernel for ZL!
Wi-Fi doesn't work for me and there are some visual glitches when scrolling, though.
owlwood said:
Awesome, nice to see a new kernel for ZL!
Wi-Fi doesn't work for me and there are some visual glitches when scrolling, though.
Click to expand...
Click to collapse
which rom
nikhil18 said:
which rom
Click to expand...
Click to collapse
Paranoid Android, latest build.
owlwood said:
Paranoid Android, latest build.
Click to expand...
Click to collapse
so the rom is not supported because it has different source code from cm
wifi is working and no glitches while scrolling @cm11 nightly.
I dont know if its possible but do u think that implementing whitebalance display settings is possible? Remember there was a setting to adjust mdnie on my recent mobile and the stock roms also provides a feature like that.
And I wisg my notification LED could pulse instead of just blinking
sualfred said:
wifi is working and no glitches while scrolling @cm11 nightly.
I dont know if its possible but do u think that implementing whitebalance display settings is possible? Remember there was a setting to adjust mdnie on my recent mobile and the stock roms also provides a feature like that.
And I wisg my notification LED could pulse instead of just blinking
Click to expand...
Click to collapse
its already implimented but you need faux clock app
tried it, but nothing is changing.
sualfred said:
tried it, but nothing is changing.
Click to expand...
Click to collapse
i will try fixing it
Andromeda Kernel
Supported: SM-N910F & SM-N910V
Do not try to flash this on ANY other variant than the N910F (Snapdragon, European)! It might work, but it can fail and end in a bootloop! Testers for SM-N910G wanted!
Disclaimer
Your warranty is now void.
We are not responsible if your phone will be damaged, broken, bootlooping or detonating in a thermonuclear reaction.
YOU are choosing to make these modifications and accept the fact that something might go wrong.
Click to expand...
Click to collapse
About me and Andromeda / Philosophy
Andromeda Kernel was created by a madman who tries to combine raw power, stability and batterylife in his high-tech laboratory home. IÄm not doing compromises and will always listen to every feedback and feature request!
Click to expand...
Click to collapse
Index
OP Post: About the kernel, basic changelog, Download, Credits
Post 2 : Changelog Preview + Development Status, FAQ
Post 3 : Known Issues, Fixes and Updates about pending fixes
Post 4 : Reserved for future use (Better safe than sorry, right? )
Features:
# Based on Samsung OpenSource Kernel XXU1BOB4
# SeLinux Permissive
# Linux version 3.10.40
# Overclocking and Underclocking (268mhz - 3,07Ghz)
# Governors: Intelliactive, Bluactive (more to come...)
# Compiled with GCC Linaro 4.9.3 Cortex A15 (03.2015) [/CENTER]
Click to expand...
Click to collapse
Changelog
Andromeda Stable 2.1
- Overclock and Underclock (268mhz - 3,07Ghz)
- Kernel NEON mode implemented
- Added KCAL Color Control (v2)(Controllable from KControl or this app: http://downloads.codefi.re/savoca/kcal)
- IntelliPlug is disabled for now (Great change, I know lol)
- Brandnew IntelliThermal from faux *yay*
Andromeda Stable 1.0
- FauxSound 3.6 fully integrated
- IntelliPlug 4.0
- Enhancements and battery optimizations
- Renamed the Kernel in the settings, the last one was a disaster http://forum.xda-developers.com/for...xda-developers.com/images/smilies/biggrin.gif
- 57% Support with KControl currently (Playstore App)
Andromeda Milestone 1.0.0 (Public Release)
- Based on BOB4 Stock kernel
- Added Bluactive and Intelliactive governors
- SeLinux Permissive (Try viper4Android, it's great!)
- Compiled with Linaro 4.9.3 Cortex A15
Click to expand...
Click to collapse
Please check Post Nr.2 for the list of features to be included!
Downloads:
Important: Do NOT make mirrors please! If you want one, please request it. Unofficial mirrors found will be reported, please respect this.
http://d-h.st/tNu1 (Stable 2.1)
Click to expand...
Click to collapse
How to Install
You have to have a custom recovery like TWRP, Philz or CWM installed.
- Download the kernel
- Reboot to recovery
- A backup is always recommended
- Flash the zip file
- You're done! Reboot and enjoy.
Credits:
Pafcholini - If it weren't for you, we'd be stuck at compiling or somewhere else. Massive Thanks for helping, guiding and having incredible patience with my incompetence
Psycho_666 - For boldly flashing what no one had flashed before and for continued support. Try SimpleRom it's an awesome ROM. And there's a new version to be launched soon, with a specially built SimpleKernel, derived from Andromeda
*To be updated in the future*
Rsroms- For being the most fearless Tester there is on the world, thanks for the massive help!
XDA:DevDB Information
AndromedaKernel, Kernel for the Samsung Galaxy Note 4
Contributors
mythos234
Source Code:https://gitlab.com/mythos234/AndromedaN910F-LL/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: Stable 2.1
Stable Release Date: 2015-03-30
Beta Release Date: 2015-03-17
Created 2015-03-17
Last Updated 2015-05-08
Changelog Preview / FAQ
Changelog Preview
To be included in next build (Andromeda_Stable_V1)
# Synapse Support (Use Trickstermod Pro or Kcontrol for now)
# IntelliPlug 4.0 (make it work finally.. Sorry for the screwup)
# Voltage Control
# Support for the N910T (T-Mobile Variant)
#
# Enhancements and battery optimizations
Click to expand...
Click to collapse
Feature requests are always welcome and highly encouraged! Just as reviews and feedback
Benchmarks:
Just how fast is this kernel? Well, this should answer it:
Frequently asked Questions (FAQ)
Or Questions and answers, since this thread is new.
Q: Can this be flashed on the Exynos Note 4?
A: No, by no means. The Exynos model is completely incompatible, sorry.
Q: And what about other Snapdragon versions?
A: I can't advise to do that, it's untested and might not work. If you know how to handle bootloops and can remove my kernel if it doesn't boot, then you can always try it and tell me how it went. More variants would be awesome.
Q: Yikes, this kernel is too close to stock! What about more features?
A: More features will be included, please check the changelog preview. You can also request features and track the progress. I will make a section on this thread to display the feature request and write if I look at them, make them or - and that might happen - reject them.
- To be updated..
Known Issues / Fixes
Bootloop if you have Viper4Android installed and flashed Andromeda over it
Fix: Uninstall Viper, install Andromeda and then reinstall.
If this issue persists in my future builds, then I'll add an automated script to remove Viper4Android upon installation of the kernel.
Welcome Aboard Mate Good luck Stefan.
G is on kk how to test it. Kernel mentioned as 5.0.1
Sent from my SM-N910F using XDA Free mobile app
bhasg1007 said:
G is on kk how to test it. Kernel mentioned as 5.0.1
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Still on kk? Samsung is slower than I thought lol... Thanks for letting me know, edited the thread. Probably better to try it when G receives official 5.0
Seems like a great Kernel, good luck buddy
Going to test on my n910t after work. Ktoonsez is the only booting kernel so far for TW5.0 but we have a data issue
Welcome thanks for the work: Bueno:
Hey stefan, great work, can i use it with simplrom, although i am happy with nadia
Rsroms said:
Hey stefan, great work, can i use it with simplrom, although i am happy with nadia
Click to expand...
Click to collapse
Hi, yes of course you can! We are actually working on deeper and more exclusive support for SimpleRom too. Stay tuned for version 2.1, it will be awesome
My kernel is much closer to the stock base, so you might get some more performance squeezed out - especially if you select Intelliactive as your governor - but at the cost of battery. I'm still not so big on features, the last couple of days my compiler decided to give me a hard time :crying:
Only 910F for now though!
this kernel is the best one for note 4 it is soo fast
nadia kernel not good lag soo much
rowihel2012 said:
this kernel is the best one for note 4 it is soo fast
nadia kernel not good lag soo much
Click to expand...
Click to collapse
same devs in this kernel like nadia , hahahahaha nadia kernel lag , boy, you need to read more before posting
ManDone.vRs said:
same devs in this kernel like nadia , hahahahaha nadia kernel lag , boy, you need to read more before posting
Click to expand...
Click to collapse
I'm not part of their Team, but Pafcholini is teaching me Don't worry, this kernel is not a clone of Nadia. My newest and upcoming build is as fluent as the last one and the batterylife is holding up a ton better too. No compromises on either side, thats my motto!
mythos234 said:
I'm not part of their Team, but Pafcholini is teaching me Don't worry, this kernel is not a clone of Nadia. My newest and upcoming build is as fluent as the last one and the batterylife is holding up a ton better too. No compromises on either side, thats my motto!
Click to expand...
Click to collapse
yeah stefan i know , but when i see a reply from unknow users and said : x kernel got lag , y kernel so bad , hey ! wake up ! need to read more than 1 week to know about a custom kernel Cheers compi .
ManDone.vRs said:
yeah stefan i know , but when i see a reply from unknow users and said : x kernel got lag , y kernel so bad , hey ! wake up ! need to read more than 1 week to know about a custom kernel Cheers compi .
Click to expand...
Click to collapse
Haha, I know what you mean I love the compliment, but I know as well as you do, that Nadia doesn't lag, unless the Synapse settings are set wrong. Too bad that my attempts at Synapse aren't going so great atm..
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
xxxfirenzexxx said:
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
Click to expand...
Click to collapse
This kernel is compatible with F version
xxxfirenzexxx said:
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
Click to expand...
Click to collapse
Yes, it is. I don't know what changes Sammy made to the BOC3 kernel yet, so mine might be a bit slower than the BOC3 stock one. But it works with the version just fine
Andromeda Stable 1.0 released!
Good evening everyone,
it took me a while, but I present you the first Stable build of Andromeda!
Changelog
- FauxSound 3.6 fully integrated
- IntelliPlug 4.0
- Enhancements and battery optimizations (mainly centered around powersuspend and adaptations to the default interactive governor)
- Renamed the Kernel in the settings, the last one was a disaster
- 57% Support with KControl currently (Playstore App)
Click to expand...
Click to collapse
About the Overclocking and Synapse...
I originally intended to include both in this build, but it will still need much more time and work and I didn't want to keep you away from the great upgrades I made in this version, so those two goodies will come later. I can highly recommend trying TricksterMod and KControl, both from the PlayStore.
And a very special announcement...
Perhaps the biggest change is that I recently joined "Team Simple - Simply Awesome" cool and will contribute an adapted version of the Andromeda kernel to SimpleRom, starting with the very close release of it's 2.1 Build. We planned something special - FauxSound is only the cherry on the Audiophile package inbuilt, so be very excited for whats coming up and be sure to try SimpleRom, especially the upcoming 2.1 version!
Oh, btw. I will also open a thread for the SimpleKernel once the Rom is released, to provide an optimized yet very close to stock experience! And there are also plans for an Exynos Build (the N910C), but I need some help with the Exy, so if anyone could lend me a hand, it would be highly appreciated! Now I understand why most devs settle for the Snapdragon..
Link to SimplRom: http://forum.xda-developers.com/note-4/snapdragon-dev/rom-simplrom-v1-t3004628
Download for Andromeda Stable 1.0:
http://d-h.st/TBO4
Click to expand...
Click to collapse
Overview:
This is a custom kernel based on Omni sources for our legendary i9000. This is only for 5.1.1/6.0.1 roms and no other version of android will be suppported
It works on any Omni based 5.1.1/6.0.1 rom.
>The zip you will download is flashable via recovery.
>> Use devil kernel manager or NStools to edit the kernel settings.
Features : - Multiple CPU governors (lulzactive, smartassV2, wheatley, lagfree, ondemandX)
- Tweaked smartassV2
- BFQ, Zen, VR & SIOPLUS I/O schedulers added
- Tweaked VR
- New TCP algorithms (westwood is default)
- Bigmem, up to 430mb
- CMA (MM only for now)
- Kernel compressed with XZ
- Compressed initramfs
- Dynamic page writeback
- Dynamic Fsync
- Custom ARM & INT voltages
- Voltages fixed for more stable OC
- Selectable GPU OC (not working properly for now)
- Fast charge
- BLX
- Live OC
- FULL O3 optimisations
- Call volume hack
- Touchwake
- BLN
- Zram
- Swap / Zram optimisations
- LMK tweaks
- SLQB memory allocator
- NEON optimized crypto routines
- Voodoo color
- SquashFS support (module)
- EXfat support (module)
- 720p patched bigmem libs
- Built from the latest Omni source
- Built using custom Cortex-A8 optimized UBERTC 5.3 toolchain of @Cl3Kener
Todo:- Backport more things from higher linux versions and fix remaining conflicts ...
- Fix GPU OC ... Well we have live OC, not worth the time i guess.
- Make CGROUP_TIMER_SLACK work
- GPU driver to DDK [email protected]
- Make a better (and more fancy) updater script
- Fixing the remaining issues [...]
What I wont do : - Enable TV out
- Upgrade linux version
- Add useless CPU governors or I/O schedulers
- make your phone as fast as a i9500
Please use it at your own risk! I am not responsible for any damage that may occur to your device.
Download :
Latest android 5.1.1 kernel :
Kernel_ION.zip MD5 : 2060f96fbffc98a1f2fae9108066b69a
http://www50.zippyshare.com/v/zVr8YvZ4/file.html
Latest android 6.0.1 kernel :
Kernel_CMAEXP.zip MD5 : 236f89a961b559c666a1c064aaccd728
http://www43.zippyshare.com/v/Yxm6WDuA/file.html
Old versions :
https://mega.nz/#F!3x5VTbiQ!87aMOGoDBuQZmiELhKlUkQ
Thanks:
@humberos
@DerTeufel1980
@kasper_h
@Alberto96
@Ezekeel
@xc-racer99, for his help on setting up my Github
@(°_o)
Anyone else who helped me
Source Code:
https://github.com/Coldwindofnowhere/android_kernel_samsung_aries
Custom built UBERTC with A8 optimisations : https://bitbucket.org/Coldwindofnowhere/
XDA:DevDB Information
Omni kernel, Kernel for the Samsung Galaxy S I9000
Contributors
Coldwindofnowhere, xc-racer99
Version Information
Status: Beta
Created 2015-10-02
Last Updated 2016-03-06
>If you like my work, hitting the thanks button won't hurt you<
good luck
Thanks for sharing ! I really want to check this kernel out, can someone tell me what is the recommended Omni LP release to be used with this kernel? A link in PM or a reply would be great.
Sent from my Nexus 7 using Tapatalk
idCyber said:
Thanks for sharing ! I really want to check this kernel out, can someone tell me what is the recommended Omni LP release to be used with this kernel? A link in PM or a reply would be great.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=61937705
Gesendet von meinem SM-G900F mit Tapatalk
idCyber said:
Thanks for sharing ! I really want to check this kernel out, can someone tell me what is the recommended Omni LP release to be used with this kernel? A link in PM or a reply would be great.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
If you can , that would be great if you test if on different 5.1.1 roms and tell me if it works or not
Coldwindofnowhere said:
If you can , that would be great if you test if on different 5.1.1 roms and tell me if it works or not
Click to expand...
Click to collapse
This kernel works with Code rom 5.1.1 the latest build and mostly everything work perfectly. However, to test this i ported it to my good old vibrant. The only issue is since Im guessing devil kernel manager doesnt support vibrant cant seem to change any values in devil. Thanks for building this kernel
falconscrest123 said:
This kernel works with Code rom 5.1.1 the latest build and mostly everything work perfectly. However, to test this i ported it to my good old vibrant. The only issue is since Im guessing devil kernel manager doesnt support vibrant cant seem to change any values in devil. Thanks for building this kernel
Click to expand...
Click to collapse
Assuming you used the kernel source (github.com/omni) to port to the vibrant, you won't have any options other than bigmem. The source code linked there doesn't have things such as Fast Charge, etc.
However, you can see if support for them is there by manually putting a "1" in the file /sys/kernel/fast_charge/force_fast_charge
(ie echo 1 > /sys/kernel/fast_charge/force_fast_charge from a terminal/adb shell).
Also, look out for selinux issues. If selinux is in enforcing mode, the Devil Manager may or may not be able to access the sysfs paths. Run "setenforce 0" to put it to permissive mode.
Speaking of source code, @Coldwindofnowhere have you uploaded the complete kernel source you used somewhere? I'd be curious to see it. Thanks for taking this project on!
xc-racer99 said:
Assuming you used the kernel source (github.com/omni) to port to the vibrant, you won't have any options other than bigmem. The source code linked there doesn't have things such as Fast Charge, etc.
However, you can see if support for them is there by manually putting a "1" in the file /sys/kernel/fast_charge/force_fast_charge
(ie echo 1 > /sys/kernel/fast_charge/force_fast_charge from a terminal/adb shell).
Also, look out for selinux issues. If selinux is in enforcing mode, the Devil Manager may or may not be able to access the sysfs paths. Run "setenforce 0" to put it to permissive mode.
Speaking of source code, @Coldwindofnowhere have you uploaded the complete kernel source you used somewhere? I'd be curious to see it. Thanks for taking this project on!
Click to expand...
Click to collapse
I didnt use the source code to do anything just replaced the boot image with that of vibrant and it seemed to boot up just fine and i could switch between smartass v2, and other addition. the only thing cant change the bigmem option over xl. It was just random since i have no clue how to build stuff.
falconscrest123 said:
I didnt use the source code to do anything just replaced the boot image with that of vibrant and it seemed to boot up just fine and i could switch between smartass v2, and other addition. the only thing cant change the bigmem option over xl. It was just random since i have no clue how to build stuff.
Click to expand...
Click to collapse
Ah, ok. I could be wrong, but I think if you replaced the boot.img with one from the Vibrant, then you're not even using the kernel from here. Weird that you still had the smartassv2 option...
If I'm wrong, someone please correct me
431mb ram possible??
xc-racer99 said:
Ah, ok. I could be wrong, but I think if you replaced the boot.img with one from the Vibrant, then you're not even using the kernel from here. Weird that you still had the smartassv2 option...
If I'm wrong, someone please correct me
Click to expand...
Click to collapse
Im not sure either because i have all govenors mentioned above while i can tweak everyone of them using kernel aditor apk and plus i can also toggle fast charge which wasnt present in omni rom for the vibrant. I have uploaded some screenshots and it is from code rom.
xc-racer99 said:
Assuming you used the kernel source (github.com/omni) to port to the vibrant, you won't have any options other than bigmem. The source code linked there doesn't have things such as Fast Charge, etc.
However, you can see if support for them is there by manually putting a "1" in the file /sys/kernel/fast_charge/force_fast_charge
(ie echo 1 > /sys/kernel/fast_charge/force_fast_charge from a terminal/adb shell).
Also, look out for selinux issues. If selinux is in enforcing mode, the Devil Manager may or may not be able to access the sysfs paths. Run "setenforce 0" to put it to permissive mode.
Speaking of source code, @Coldwindofnowhere have you uploaded the complete kernel source you used somewhere? I'd be curious to see it. Thanks for taking this project on!
Click to expand...
Click to collapse
Sure, i'll set a github soon, but trust me there are only minimal changes to the origianl code (even if adding liveOC seems harder since i only got build errors xD).
Btw i won't build anything this week, i'm busy with exams.
Github is up !
Coldwindofnowhere said:
Could someone help me to setup my github please ? (PM me)
Click to expand...
Click to collapse
Check your PM, let me know if you need more help.
Hey.
I tested it on 5.0.2 . stuck on bootanimation. Better mention that its for 5.1.1 .
Can you add support or please tweak it for 5.0.2
Now iam using RR lp 5.0.2
I removed some apps. And it have the same apps like omni. Its works faster than ever. Working theme engine. Only removed music and added apollo.
Has anyone have a bug where when you call someone the speaker mode work fine but the audio stops working when you turn off speaker mode
I had no problem with original omni kernel any fix because this is an awesome kernel
falconscrest123 said:
Has anyone have a bug where when you call someone the speaker mode work fine but the audio stops working when you turn off speaker mode
I had no problem with original omni kernel any fix because this is an awesome kernel
Click to expand...
Click to collapse
That's weird, i haven't changed anything concerning the audio in the kernel. You're using it on a vibrant right ? This might be the problem. I'm gonna try to reproduce this bug on my i9000 and see ....
Edit: try this http://www42.zippyshare.com/v/aZ6XgBlE/file.html
DO NOT FLASH, IT DOESN'T WORK (except if you want to give me a log or if you're really curious)
Any feedback on the vibrant version ?
Coldwindofnowhere said:
Any feedback on the vibrant version ?
Click to expand...
Click to collapse
The kernel didnt even flash no errors nothing whenever i flashed via twrp it would instantaneously reboot to recovery. Thanks again for atleast trying to fix the issue.
Coldwindofnowhere said:
Any feedback on the vibrant version ?
Click to expand...
Click to collapse
Bro. Can you add fast charge and the governers in omni kernal 5.0.2. Please
Thanks
Dirty Unicorns 6.0.1 is probably the best marshmallow rom for amami so far , although it has some problems: camera app cannot take pictures at 20.7mp, and exfat-formated sdcard is not supported.
So I made a kernel to fix these problems. You can flash with twrp or flashfire.
Kernel_Amami_AOSP_6_20160709.zip contains aosp kernel built with exfat-nofuse and some other features, as well as other executables or libraries needed to identify and mount exfat(vold , blkid etc.) This may work with other aosp 6.0.1 based roms, but I never tried by myself.
2016.06.18 : I ported some features from other kernels like M5 kernel. Features included:
1. Various cpufreq governors, hotplug drivers and i/o schedulers
2. KCAL color control by @savoca
3. Faux Sound Control V3
4. CPU/GPU OC & UV
5. Vibrator intensity control
6. Ultra-ksm
7. Kexec-hardboot
8. Dynamic Fsync 1.2
9. Mac80211 injection patch and HID patch for keyboard support
10. Sysfs interface to Enable / Disable CRC on the data blocks
11. Exfat and Paragon NTFS(UFSD)
12. Zram
13. Merge upstream patches up to 3.10.102
MtkCamera.zip contains camera app from Mediatek devices with lollipop. It can take 20.7mp photos(3936 x 5248) and has some useful features like visual effects and qrcode scanner.
Modified kernel source : https://github.com/KuronekoDungeon/android_kernel_sony_msm
Download : https://drive.google.com/folderview?id=0B-DoK6BdpB2fZEZ5eG5NcnhYNFU&usp=sharing
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
levone1 said:
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
Click to expand...
Click to collapse
Is he working on a 3.10.9x kernel ?
maz-1 said:
Is he working on a 3.10.9x kernel ?
Click to expand...
Click to collapse
This is from main thread latest version...
levone1 said:
This is from main thread latest version...
Click to expand...
Click to collapse
cool, I guess I will be a tester then.
maz-1 said:
cool, I guess I will be a tester then.
Click to expand...
Click to collapse
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
levone1 said:
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
Click to expand...
Click to collapse
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
maz-1 said:
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
Click to expand...
Click to collapse
maybe we can jointly maintain ?
CLINTZ9 said:
maybe we can jointly maintain ?
Click to expand...
Click to collapse
Sounds good.
maz-1 said:
Sounds good.
Click to expand...
Click to collapse
cool !
CLINTZ9 said:
cool !
Click to expand...
Click to collapse
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
John.D.. said:
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
Click to expand...
Click to collapse
Laggy camera is a driver issue, just wait until sony updates software binaries for amami.
Hmm, why you delete MTKCamera? You have another app for taking photo in 21mp?)
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
maz-1 said:
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
Click to expand...
Click to collapse
I already added it, will probably be in next weekly
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
check your whatsapp inbox
What's 'jhead exif fix' file in your Gdrive link?
levone1 said:
What's 'jhead exif fix' file in your Gdrive link?
Click to expand...
Click to collapse
libjhead with this patch :
https://gist.github.com/updateing/2b58ebd4a8c75780443f28f514e9bb39
Photos token by Android N may contain wrong exif infomation and cause app crash on marshmallow/lollipop.
need help - CPU GOVs and frequencies
Hi,
first of all thanks for the kernel! I'm just migrated from RR Lollipop to MM DU ROM (today to the build of 17. June). I have strange issues with the kernel.
I can not change the CPU govs. More critical: The minimum CPU frequency is shown to be 1.8 GHz. Whatever I try, I cannot get the values gov/freq to stick.
Always when I reopen an tuning app, the settings are reverted.
Root seems to work fine. Also tried to disable SE-linux via terminal ("setenforce 0"). The same.
(Combinations I tried: kernel audiutor, performance control, system tuner... also on DU (3. june) + kernel (5. june)
Can somebody help me out?
Who can permanently adjust the CPU settings on DU with/without this kernel?
Thanks in advance!
Hey guys and girls,
after the 1st GEN Pixel XL and the U11, I proudly present Kirisakura Kernel for the 2nd GEN Pixel XL.
I always try to provide a stable kernel, with excellent performance that is reliable and if possible has some battery savings compared to stock.
With that said we come straight to the feature list.
Features:
- Latest EAS patches from ack 4.4 branch combined with a few EAS enhancements from CAF brought in from my U 11 EAS Kernel
- New EAS Patch from latest integration branch
- Upstreamed to 4.4.253, thanks @nathanchance for maintaining the android-linux-stable repo
- Upstreamed with most of the latest CAF patches
- Built with prebuilt clang 11.0.1 from google
- Dev preview changes included
- Maple, ROW and Tripndroid IO Scheduler included
- Wake Gestures from @flar2
- boost ddr bandwidth on screen wakeup
- KCAL support
- KLAPSE included
- GPU Boost from @tbalden, tuned GPU driver
- TCP Congestion : westwood
- Wakelock Control
- Slimbus enhancement
- CAF improvements
- Mac randomization
- Copperhead OS security enhancements
- Backlight dimmer
- Fingerprint Unlock boost
- OOM_Reaper, OOM_Kill Backport from 4.9 kernel
- Lowmemorykiller Backport from 4.9 Kernel
- ZRAM implementation updated from kernel/common and new compression algorithm ZSTD
- some other patches, enhancements from my old kernels
Download:
Android 10 and following builds:
https://www.androidfilehost.com/?w=files&flid=301458
Android Pie 9.0 builds:
https://www.androidfilehost.com/?w=files&flid=281728
Old builds
https://www.androidfilehost.com/?w=files&flid=275730
Installation:
1. Download the kernel.zip to your device
1a. Optional: While it may not be necessary all times, you may want to restore stock boot.img, reroot with magisk and optionally install twrp.zip if coming from another kernel. Before reporting issues make sure you do that! Thank you!
You only need to do either 2a OR 2b
2a. Boot to TWRP (if available) and flash my kernel.zip. Root will be preserved!
or
2b. Flash kernel zip in EX Kernel Manager or FKM app. Root will be preserved!
3. Reboot and profit! Before reporting any issues make sure to read post #2 and #3
Changelog:
8.0
1.0.1 : https://forum.xda-developers.com/showpost.php?p=74587109&postcount=40
1.0.2 : https://forum.xda-developers.com/showpost.php?p=74672203&postcount=49
1.0.3 : https://forum.xda-developers.com/showpost.php?p=74741725&postcount=53
8.1
https://forum.xda-developers.com/showpost.php?p=74784702&postcount=54
1.0.1 https://forum.xda-developers.com/showpost.php?p=74830621&postcount=65
1.0.4 https://forum.xda-developers.com/showpost.php?p=74915675&postcount=85
1.0.5 https://forum.xda-developers.com/showpost.php?p=75071271&postcount=95
1.0.6 https://forum.xda-developers.com/showpost.php?p=75242785&postcount=108
1.0.8 https://forum.xda-developers.com/showpost.php?p=75314653&postcount=147
1.0.9 https://forum.xda-developers.com/showpost.php?p=75436782&postcount=170
1.0.10 https://forum.xda-developers.com/showpost.php?p=75463997&postcount=201
1.0.11 https://forum.xda-developers.com/showpost.php?p=75804009&postcount=219
1.1.0 https://forum.xda-developers.com/showpost.php?p=75831914&postcount=233
Aurora Series (compatible with O and P)
Aurora 1.0 https://forum.xda-developers.com/showpost.php?p=76106602&postcount=245
Aurora 1.1 https://forum.xda-developers.com/showpost.php?p=76453618&postcount=291
Aurora 2.0 https://forum.xda-developers.com/showpost.php?p=76791556&postcount=326
Aurora 2.1 https://forum.xda-developers.com/showpost.php?p=76808067&postcount=329
Aurora 2.3 https://forum.xda-developers.com/showpost.php?p=76992664&postcount=338
Aurora 2.4 https://forum.xda-developers.com/showpost.php?p=77008297&postcount=360
Aurora 2.5 https://forum.xda-developers.com/showpost.php?p=77093225&postcount=362
Aurora 2.7 https://forum.xda-developers.com/showpost.php?p=77187511&postcount=369
Aurora 2.9 https://forum.xda-developers.com/showpost.php?p=77250936&postcount=372
Aurora 3.0 https://forum.xda-developers.com/showpost.php?p=77517210&postcount=382
Aurora 3.1 https://forum.xda-developers.com/showpost.php?p=77520614&postcount=392
Aurora 3.3 https://forum.xda-developers.com/showpost.php?p=77534014&postcount=401
Aurora 3.4 https://forum.xda-developers.com/showpost.php?p=77540665&postcount=402
Aurora 3.8 https://forum.xda-developers.com/showpost.php?p=77631274&postcount=404
Aurora 3.9 https://forum.xda-developers.com/showpost.php?p=77757619&postcount=417
Aurora 3.9.1 https://forum.xda-developers.com/showpost.php?p=77778532&postcount=418
Aurora 4.1.1 https://forum.xda-developers.com/showpost.php?p=77778532&postcount=418
Aurora 4.4.0 https://forum.xda-developers.com/showpost.php?p=78000697&postcount=441
Aurora 4.5.0 https://forum.xda-developers.com/showpost.php?p=78095408&postcount=473
Aurora 4.5.2 https://forum.xda-developers.com/showpost.php?p=78147378&postcount=488
Aurora 4.5.3 https://forum.xda-developers.com/showpost.php?p=78222804&postcount=529
Aurora 4.5.4 https://forum.xda-developers.com/showpost.php?p=78280255&postcount=551
Aurora 4.5.6 https://forum.xda-developers.com/showpost.php?p=78298642&postcount=566
Aurora 4.5.8 https://forum.xda-developers.com/showpost.php?p=78316163&postcount=587
4.5.9 https://forum.xda-developers.com/showpost.php?p=78330502&postcount=590
5.0.0 https://forum.xda-developers.com/showpost.php?p=78496077&postcount=632
5.0.1 https://forum.xda-developers.com/showpost.php?p=78623504&postcount=686
5.0.2 https://forum.xda-developers.com/showpost.php?p=78672048&postcount=691
5.0.3 https://forum.xda-developers.com/showpost.php?p=78767899&postcount=695
5.0.5 https://forum.xda-developers.com/showpost.php?p=78838287&postcount=702
5.0.7 https://forum.xda-developers.com/showpost.php?p=78851731&postcount=712
5.0.9 https://forum.xda-developers.com/showpost.php?p=78968412&postcount=721
5.0.12 https://forum.xda-developers.com/showpost.php?p=79054849&postcount=745
6.1.0 https://forum.xda-developers.com/showpost.php?p=79506374&postcount=821
6.3.0 https://forum.xda-developers.com/showpost.php?p=79853943&postcount=838
Android 10
7.0.0 https://forum.xda-developers.com/showpost.php?p=80765653&postcount=886
7.1.0 https://forum.xda-developers.com/showpost.php?p=81119515&postcount=898
7.2.0 https://forum.xda-developers.com/showpost.php?p=81418399&postcount=949
7.3.0 https://forum.xda-developers.com/showpost.php?p=81684207&postcount=961
7.5.0 https://forum.xda-developers.com/showpost.php?p=82484359&postcount=986
7.5.1 https://forum.xda-developers.com/showpost.php?p=82742891&postcount=991
8.0.0 https://forum.xda-developers.com/t/...kura-wahoo-kernel-8-0-0.3706286/post-84398995
How to report a bug:
Please take a look here: https://github.com/nathanchance/Android-Tools/blob/master/Guides/Proper_Bug_Reporting.txt
And here: https://forum.xda-developers.com/showpost.php?p=70974375&postcount=3
Credits:
@Eliminater74 for bringing me into the game and the Inspiration
@flar2 for all his work
@tbalden
@savoca
@nathanchance
@RenderBroken for helping me out
Donations:
Donations are not mandatory but very welcome.
If you like my work: http://paypal.me/freak07
Source:
https://github.com/freak07/Kirisakura_Wahoo
A good source of information about EAS is here:
https://developer.arm.com/-/media/d...on=dd6ee0be-dc48-4fd2-ae39-b14aedad9eed&la=en
and here:
https://developer.arm.com/open-source/energy-aware-scheduling
see also my thread on the U11 forums:
https://forum.xda-developers.com/showpost.php?p=73189268&postcount=2
may be a good read for some something is specific for the U11 EAS integration but it´s worth a read nonetheless
maybe also for future use
Excellent!!
Thanks Freak for this cool option!
thanks @tbalden and @budeone
If someone faces issues with the OC/UV I will also provide an option without it of course
Just tell me and I happily compile it.
With this type of kernel, is tweaking really necessary anymore? The GPU boost enabled by default or should I install a manager to enable?
Great to C! Kudos
jbarcus81 said:
With this type of kernel, is tweaking really necessary anymore? The GPU boost enabled by default or should I install a manager to enable?
Click to expand...
Click to collapse
Gpu boost is set to the lowest of the three settings, where it takes action, by default.
Exkm is only needed to set cpu, gpu freqs other than mine. Or to set another tcp congestion algorithm if you face any problems with westwood.
Kcal may come in quite handy too.
also you can change io scheduler to another one I enabled. (deadline, maple, tripndroid) cfq is patched up a bit to work better so I left it at that even tough it is the stock setting already.
Did you personally select the new volt tables or did you leave it open for us to control from our selected app? Just wondering! I love your work so i cant wait to flash this
eqbirvin said:
Did you personally select the new volt tables or did you leave it open for us to control from our selected app? Just wondering! I love your work so i cant wait to flash this
Click to expand...
Click to collapse
It isn’t adjustable for the user by any app. The voltage range (adjusted by me) the kernel can choose from for all frequencies is hardcoded in the kernel at compilation.
Freak07 said:
It isn’t adjustable for the user by any app. The voltage range (adjusted by me) the kernel can choose from for all frequencies is hardcoded in the kernel at compilation.
Click to expand...
Click to collapse
Ahhh gotcha. Explains why i havent seen voltage tables in any kernel for like 3 years hahaha thank you!
eqbirvin said:
Ahhh gotcha. Explains why i havent seen voltage tables in any kernel for like 3 years hahaha thank you!
Click to expand...
Click to collapse
It’s since the 64 bit architecture dropped, that qualcomm started to introduce something like intelligent, automatic voltage scaling. The device will automatically and intelligently pick the most appropriate voltage for a frequency on a given scenario.
I actually saw an attempt to make it adjustable by the user again but it required to partly disable it and make it more static again on github at some point if I remember correctly. But this attempt didn’t prove to be stable and I think in general less desirable.
Oh i didnt know it had to do with the move the 64 bit. Thats interesting! Id rather have the SoC/System selecting the voltage rather than myself anyway
@Freak07 May I assume you own this device? I would think so. Lol
Golf c said:
@Freak07 May I assume you own this device? I would think so. Lol
Click to expand...
Click to collapse
Yes.
Is any one of these better than the other for GPU?
jbarcus81 said:
Is any one of these better than the other for GPU?
Click to expand...
Click to collapse
no. Leave it at the default one otherwise gpu boost will also stop working. :highfive:
I'm noticing jittery scrolling in many apps... Not sure if it's something I've done or not but other than that great battery life!
jbarcus81 said:
I'm noticing jittery scrolling in many apps... Not sure if it's something I've done or not but other than that great battery life!
Click to expand...
Click to collapse
No I notice absolutely no stuttering in any of the apps I have installed. don’t know what’s happening for you