[ROM] OBAR | 5.1.1 | Super Speedy | Reliable | Release 3 | - Sprint Galaxy Note 4 Android Development

Welcome to: The One Bad Ass ROM​
Base Features:
Based On Stock OCG5 Lollipop 5.1.1 (Thanks To tx_dbs_tx)
Emotion Kernal R20 (Thanks To Pafcholini)
Rooted & Busy Boxed
Build.prop Tweaks
De-Bloated
Its ON Removed
Knox Removed
Hotspot Hack
5 Way Reboot
Proper SuperSU
No Sprint Bloat
Modifications:
Added AdAway
Added Synapse
Added 400+ Fonts
Added Dolby Atmos
Added ViPER4Android
Added Guest Feature
Added Pure Android Ringtones/Alarms/Notification Sounds (Coming Soon)
Added XTREME Music (Highly Improved Sound Quality)
- Beats Audio, Pure Audio Engine, Pon Audio 3, HTC Boom Sound, Sony SForce Surround 3D, Sony DSEE-HX, Dirac HD Audio, xLoud, AwesomeBeats, HTK Audio Engine And Viper! (All In One)
Enabled Private Mode
Enabled Call Recording
Enabled Call & SMS Blocking
Enabled WIFI Calling In Settings
Enabled Folder View In Message App
Enabled Ability To Turn Shutter Sound Off/On
Enabled Ability To Save And Restore Messages On SD Card
Improved Camera
Improved Battery Life
Improved Speed Quality
Removed All Easy Mode Stuff
Removed Safe Volume Warning
Removed Netflix And HULU Block
Removed Quick Search And SFinder From Pull Down
Install: (See second post for downloads and changelogs)
Download
Transfer To Phone
Reboot To Recovery
Wipe System, Data, Cache, Dalvik Cache (x3)
Factory Reset (x3)
Install Noterized Rom
Wait About 10min To Boot
Enjoy
After Install: (Recommended)
Please allow about 10 minutes to boot up after initial boot.
Recommended to wait up to five minutes on initial boot before doing anything, then do a full restart.
To get back Developer Options go in to Settings, About Phone and rapidly tap Build Number until it says your a developer.
Notes:
In order to flash this ROM you must have taken Sprints OCG5 OTA or have done tx_dbs_tx OCG5 method.
There will be around 12 updates in the Play Store after initial boot. I try to keep all the apps updated but it is hard so please bare with me.
For proper flash have at least 80% battery and MAKE SURE you wipe System, Data, Cache, Dalvik Cache 3 times then Factory Reset 3 times.
Battery Tip: (For people who may seem like there battery life isn't the way it should be, please consider doing the following.)
Install these two apps Repair Battery Life and Battery Calibration.
Make sure your battery is fully charged and unplugged.
Run the Repair Battery App first and fix any issues that occur.
Now plug phone back into charger.
Run the Battery Calibration App.
Enjoy Better Battery Life
* Guide is all thanks to @ipodhacked86 *
Credits:
tx_dbs_tx - For stock OCG5 base and great help
ipodhacked86 - For testing and helping me develop OBAR
Pafcholin - For amazing kernal
zhuhang - For the ViPER4Android App
EMSPilot - For the ultimate guides
kmokhtar79 - For some more guides
mrRobinson - For the AdAway app
androidexpert35 - For the amazing XTREME Music Mod (Incredible Sound Quality)
OBAR Supporters:
PDXunicorn
thebigd021
Disclaimer: I do not and will not take any responsibility towards anything that happens to your phone after flashing.​
XDA:DevDB Information
OBAR, ROM for the Sprint Samsung Galaxy Note 4
Contributors
SaintZ93, ipodhacked86
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPU4COG5 - Android 5.1.1
Based On: Stock N910PVPU4COG5
Version Information
Status: Stable
Current Stable Version: Release 3
Stable Release Date: 2016-01-18
Created 2015-09-05
Last Updated 2016-01-26

OBAR: Release 3 (1/18/2015):
Updated XTREMEMusic (v7.0.3)
Updated Emotion Kernal (R23 RC1)
Updated BusyBox
Updated Kernal Adiutor (Emotion Style)
Fixed Wifi and Red X Issue
Fixed Wifi Resetting After Reboots
Sound Alive Imported
Minor Fixes
RAM Improvements
Added f2fs Support (You need a recovery that supports full f2fs)
Slight Touch Boost
Battery Improvement
Build.prop Tweaks
Slimmed
Removed AdAway
Removed Other Stuff
Removed Duplicate ViPER4Android
And more...
Download:
https://www.androidfilehost.com/?fid=24369303960688214
Click to expand...
Click to collapse
MD5:
57df3a1302ff6dca7642d3eada0308d1
Click to expand...
Click to collapse
ROM Size: 1.25GB
Older Versions said:
OBAR: Release 2 (12/1/2015):
Updated Emotion Kernal R22 RC23 (Data & Signal Fix)
Removed Synapse
Included Kernal Adiutor
Update XTREMEMusic v5.3.1
Minor Fixes
Android M Ringtones
Android M Notification Sounds
Android M Alarm Sounds
Updated BusyBox 1.24.1
Loud Volume Fix
And more...
Download:
https://www.androidfilehost.com/?fid=24269982087009013
Click to expand...
Click to collapse
MD5:
f8cb2a868aa1e5733105254b76b4332b
Click to expand...
Click to collapse
ROM Size: 1.25GB
OBAR: Release 1 (9/5/2015):
Initial Release
Download:
https://www.androidfilehost.com/?fid=24052804347808775
Click to expand...
Click to collapse
MD5:
8629ad4147eb5689d0c80c478425e112
Click to expand...
Click to collapse
ROM Size: 1.25GB
Click to expand...
Click to collapse

Modifications
Remove Call Recording - https://www.androidfilehost.com/?fid=24052804347810090

Oh yeah here we go
Sent from my SM-N910P using Tapatalk

I will downloading this as soon as it come out.

Its nice man i love it
Sent from my SM-N910P using Tapatalk

In Base Features and Credits
OCG5 is COG5. Just trying to prevent 'those kind of Qs'
Just tryin to help, i can see it now, "I have OG5 Base, will this CG5 be compatible with my OG5?"

Ahh thanks, I didn't even notice that lol

xxSTARBUCKSxx said:
In Base Features and Credits
OCG5 is COG5. Just trying to prevent 'those kind of Qs'
Just tryin to help, i can see it now, "I have OG5 Base, will this CG5 be compatible with my OG5?"
Click to expand...
Click to collapse
Yeah just a typo but for of5 and oe1 im not sure because im on ob7bootloader and og5 baseband
Sent from my SM-N910P using Tapatalk

SaintZ93 said:
Ahh thanks, I didn't even notice that lol
Click to expand...
Click to collapse
Lol, Np Man. You and @ipodhacked86 keep up the amazing work!!! Your time/effort and works are very appreciated for our Sprint Forum.

xxSTARBUCKSxx said:
Lol, Np Man. You and @ipodhacked86 keep up the amazing work!!! Your time/effort and works are very appreciated for our Sprint Forum.
Click to expand...
Click to collapse
Honestly @SaintZ93 is the mastermind haha but i do all the testing and making sure everything works but i havent had n e provlems with this but obar will get better as time permits
Sent from my SM-N910P using Tapatalk

The first release of OBAR has now been launched! Please enjoy everyone

Nice, can't wait to test drive

Downloading now...:good:

Running great, got xposed installed, I'm a happy camper thanks gentlemen....

What version xposed?

kachhh said:
What version xposed?
Click to expand...
Click to collapse
https://mega.nz/#!e00nGIDY!gWnJQUEmyXuB0AvdG7NgwOagdBbNlsSbnsY0C3dNPyg

Downloaded looking forward to giving it a try.
Sent from my SM-N910P using Tapatalk

Flashed it but where is the installer

Erod730 said:
Flashed it but where is the installer
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440

Related

[ROM]CM7-Hybrid-V1.0 [01/11/2012]

*WARNING! I Am Not Responsible For Anything That Happens To Your Device*
.::†Romans 10:9†::.
"...By their fruits ye shall know them."
Sharing is Caring​
DEVS
RoyalKnight6190
Testers
pyraxiate
br00x
jr_718
MightyMike889
Graphics
akashptl
Phoenix6
DARKSIDE Server
emmdub
Team IRC
Freenode
Coming soon​-------------------------------------------------------------------------
CM7-Hybrid
CM7-Hybrid is built and compiled from CM7 source code with lots of the CM7 extras and other assorted bloatery removed + a custom kernel & numerous tweaks and optimizations added in. It's sleak, it's mean, and it's fast.
Thank you to: Infinitybiff, XxKolohexX, ChromerSmith, Kingklick, Firerat, Cyanogen, HTC, Samsung, Google, Dumfuq, Houka420, The Entire CM Team and contributors and of course the guy that made this all possible JesusFreke. We wouldnt be where we are now if it wasnt for him.​
=============================================
Release Name: CM7-Hybrid
Release Version: V. 1.0
Proprietary Files used from: Slayhers CM7 Build - Thank You so Much!!!
Base Firmware: 2.3.7
Kernel Verison: Synergy CyanogenMod 7 Edition V0.03.1
Recovery Required: 3.0.2.7
=============================================
INSTALL INSTRUCTIONS:
- Download the ROM
- Boot into recovery
- Wipe data
- Wipe cache partition
- Wipe dalvik cache (under advanced)
-Optional go to mounts, and go through the list formatting everything. If you format your sdcard you will loose everything on it.
- Install from zip / choose zip from SD card / flash it!!
- (optionally) You can let the phone settle for 1-2 mins on initial boot up. IF you are using setCPU, I strongly recommend a fresh reboot and a 1-2 minute settle before auto detecting clock speeds. (see below for more details)
----------------------------------------------------------------------------
Working:
DATA
WIFI
GPS
BT
Known Issues:
This is an Alpha Build, so these are the things that we found in our rigorous testing. Most these things you will not even notice during your daily use. Trust me its a daily driver still. !!Please!! dont mention/complain or gripe about these issues, yes we know they are broken and not working hence why they are listed just deal with it. You are the one that wanted to try a test build.
Call Sound doesnt work when GPS is turned off - Temp fix leave GPS on
Thank you Sammydr10, for your work finding the GPS fix for audio.
USB connection of SDcard needs to be fixed - Temp fix is use mount sdcard in recovery/use Auto Mount SD app or do not switch to internal memory in CM settings, use the sdcard (which is done by default).
Mounting of emmc - Temp fix use Root Explorer
Netflix freezes - Nothing yet
Any other launcher is having FC problems
Gallery is a bit laggy at first, and may not rotate- toggle orientation/use quickpic for gallery.
When listening to music and receiving a notification, volume does not return to previous levels- Cyanogenmod settings/Sound/Uncheck Notification Focus (mstrk242 helped with this one THANKS)
When using a lockscreen gesture to open directly to camera, the viewfinder looks all wonky and green. Enter gallery and exit and camera will look normal again.
Google music will not stream on 4g it does stream over wifi- Not sure yet.
In quickpic when when attempting to rotate an image to edit it causes force close. - Looking into it.
When using a custom app on the three ring lockscreen, selecting unlock from the middle ring causes reboot: Call your phone unlock to answer then get into settings and change lockscreen preference. Three ring lockscreen does work if you leave the custom app in the middle.
Blurry MMS: Open messaging app enter settings/Custom User Agent/Custom/Android-MMS/2.0
Kernel Info:
Thank you -Mr. X- for the great Kernel.
Kernel base: 2.6.35.13
Included Version: Synergy CyanogenMod 7 Edition V0.03.1 - CWM Flashable V0.03.1
Team Server DOWNLOAD THE ROM V1.0
Mirror Server DOWNLOAD THE ROM V1.0
DOWNLOAD THE ROM VRC1
Change-Log
Release Name: CM7-Hybrid
Release Version: v1.0
Base Firmware: 2.3.7
Kernel Verison: Synergy CyanogenMod 7 Edition V0.03.1
Recovery Required: 3.0.2.7
Rom -
Optimized every OGG file (Sound Files)
Cut rom down in size by at least 10Mb, prior to adding extras
Dalvik Cache updated to 72mb
Added Speed Tweaks
Added Battery Saving Tweaks
Added Media Tweaks
Added UI Tweaks
Apps -
Zipaligned and Optimized Every App
Added new Widget Picker
- Combines Simular widgets into one category
Added 2G Toggle Widget
Removed extra Bloatware
Removed Gmail - Install it from Marketplace
Removed Gmaps - Install it from Marketplace
Kernel -
Synergy CyanogenMod 7 Edition V0.03.1
Framework -
Zipaligned and Optimized
Overall -
Cut rom in size and made it faster
------------------------------------------------------
Change-Log
Release Name: CM7-Hybrid
Release Version: vRC1
Base Firmware: 2.3.7
Proprietary Files used from: Slayhers CM7 Rom - Thank You
Kernel Verison: Synergy CyanogenMod 7 Edition V0.03.1
Recovery Required: 3.0.2.7
Rom -
Based on Build CM7 Gingerbread 2.3.7
Added Performance Scripts
Added Gapps w/GTalk Video
Battery Saving Tweaks
Set Dalvik Cache to 64mb
Added wifi Scan settings
Set Wifi Scan to 180sec
Added DARKSIDE Dev Team Custom GPS Script
Added Roboto Font (ICS Font)
Bin -
Added Kernel speed script
Libs -
Added Gtalk video Libs
Apps -
Removed ADW
Added custom Launcher2
Zip Aligned and Optimized
Removed useless Bloatware from CM7
Themed and optimized Gingerbread Keyboard
Optimized and edited Launcher2
Added auto SDcard mount
Added Quikpic
Removed 3D Gallery (Not properly working, will put back once issues fixed)
Kernel -
Synergy CyanogenMod 7 Edition V0.03.1
Added Synergy Kernel script
Framework -
Zip aligned and Optimized
Overall -
Rom speed up and more stable
Other Stuff That I Forgot!!! or want to keep a secret.
Reserved for later
Time to start flashing!
_______
Wow Sammy! Were you waiting for this? Lol!!!
Enjoy Folks this is the good stuff.
Btw folks TDJ is ever so close to getting the device. PLEASE see my sig
raycaster3 said:
Wow Sammy! Lol Were you waiting for this? Lol!!! Enjoy Folks this is the good stuff.
Click to expand...
Click to collapse
Lol yes i was waiting for it
Sweet man nice work!
Haha I moved pages for a minute and it was up! WOOHOO!
Awesome! This may sound like a dumb question, but is there any way to update CWM for our phones? I just flashed the recovery.tar through ODIN, but I think that is only version 3.0.2.5.
Thanks again for all the hard work guys!
I'm glad you guys are here we really need some help thanks.
Sent from Samsung Galaxy S II running BeastMOD II v4.2
skadude66 said:
Awesome! This may sound like a dumb question, but is there any way to update CWM for our phones? I just flashed the recovery.tar through ODIN, but I think that is only version 3.0.2.5.
Thanks again for all the hard work guys!
Click to expand...
Click to collapse
yes, you need to update through the marketplace app.
Finally I can love my phone again (as if I ever didn't)
Sent from my SGH-T989 using xda premium
Here we go, first time flashing a rom from The Darkside. Thanks.
Powered by the SGSII....
mjeezy13947 said:
Finally I can love my phone again (as if I ever didn't)
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I am glad you can love your phone again.
ThC23 said:
Here we go, first time flashing a rom from The Darkside. Thanks.
Powered by the SGSII....
Click to expand...
Click to collapse
Welcome to the DARKSIDE, its going to be a fun ride.
skadude66 said:
Awesome! This may sound like a dumb question, but is there any way to update CWM for our phones? I just flashed the recovery.tar through ODIN, but I think that is only version 3.0.2.5.
Thanks again for all the hard work guys!
Click to expand...
Click to collapse
Should be able to update through rom manager...
Sent from my SGH-T989 using xda premium
ThC23 said:
Here we go, first time flashing a rom from The Darkside. Thanks.
Powered by the SGSII....
Click to expand...
Click to collapse
Wait for it.....Welcome to the DARKSIDE!!!
raycaster3 said:
Wait for it.....Welcome to the DARKSIDE!!!
Click to expand...
Click to collapse
I'm super stoked to try your team's stuff. Let me say first off that I am a fan of little touches. The updater-script text is very cool and so is the boot animation.
Wow. Good job guys. Still got to wait before I can download..
Sent from my HTC Glacier using xda premium
drewtang said:
Should be able to update through rom manager...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
How? I installed ROM Manager, is it by tapping More Recoveries? It had an error with permissions.
Wait, I'm confused. Our version of CWM is 5.0.2.6, so we have nothing to update then, correct?
jr_718 said:
Wow. Good job guys. Still got to wait before I can download..
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
That sucks, sorry to hear that, it will be waiting for you when you can.
kenvan19 said:
I'm super stoked to try your team's stuff. Let me say first off that I am a fan of little touches. The updater-script text is very cool and so is the boot animation.
Click to expand...
Click to collapse
Thank you. I agree it gives it a nice look.

[ROM] Google Edition Android 4.3 | UNTOUCHED | JWR66Y.S003 | VERSION 2.0 (23/09) |

| Google Edition 4.3 | Untouched | Odexed |
| JWR66Y.S003 | Version 2.0 |
DOWNLOAD LINK - MEGA
DOWNLOAD LINK - MULTIUPLOAD​
==================================================
About:
I made this ROM for myself. I wanted a perfect untouched version of the Google Edition firmware without root, zipalign, deodex, mods, etc.
I know some of you would like that too so I decided to post it here on XDA. You can root the phone afterwards if you wish.
The only mod in this version is the faux123's kernel. It's still stock but with some minor changes to fix Security FC and add exFAT support.
==================================================
Special Thanks to:
@faux123 for making the kernel fix for the Security FC issues and adding exFAT support
@The111 for providing me with the untouched system dump
@nintendolinky for fixing the SD Card Read-Only issue
@Chainfire for SuperSU.
==================================================
Changelog:
Version 2.0 (23/09):
- New stock JWR66Y.S003 kernel with Faux123 fixes
Version 1.0 (12/09):
- Initial Release
- Old Faux's Kernel for the moment.
==================================================
Instructions:
Boot to Recovery
Wipe Data if you are not coming from a Google Edition ROM
Flash the zip
If you want root, flash SuperSU
Reboot
==================================================
What's not working:
Sim Unlock gets stuck
Touch to focus on HDR mode
Google Wallet*
*It might work if you flash this: http://forum.xda-developers.com/attachment.php?attachmentid=2163191&d=1375578553
*It will change the build.prop of the ROM to Sprint (L720) to make it work. Thanks to @yeahmann for the zip.
==================================================
OLD VERSIONS
==================================================
Android 4.3 - JWR66Y.S003 - (12/09):
- Changelog:
Version 1.0 (12/09):
- Initial Release
- Old Faux's Kernel for the moment.
Click to expand...
Click to collapse
- Downloads:
Version 1.0:
- MEGA
- MULTIUPLOAD
Click to expand...
Click to collapse
==================================================
Android 4.3 - JWR66V.S014 - (06/08):
- Changelog:
Version 3.0 (08/08):
- Updated kernel with exFAT support
Version 2.0 (07/08):
- Fixed SD Card Read-Only issue
Version 1.0 (06/08):
- Initial Release
Click to expand...
Click to collapse
- Downloads:
Version 3.0:
- MEGA
Version 2.0:
- MEGA
Version 1.0:
- MEGA
Click to expand...
Click to collapse
==================================================
Why wouldnt wallet work? Might have to change the prop...
death1246 said:
Why wouldnt wallet work? Might have to change the prop...
Click to expand...
Click to collapse
Yes, but I'm not going to do that since this is an untouched version.
But I provided a zip to change the build.prop if someone wants it.
Since Google Wallet is not supported in my country I have no way of testing it though. Let us know.
Another question. Why is this almost 100 MB larger than almost all other releases? Is this how big it normally is? I want fully stock GE Edition and im glad someone finally did it. Almost did it myself :3
I will let you know if it works or not. Going to test the wallet app after I see my recruiter.
If it's un touch than fc settings is not fixed?
boterkaaseneieren said:
If it's un touch than fc settings is not fixed?
Click to expand...
Click to collapse
I believe the fc was from using a different build with new lib files. I know what rom you're talking about.
boterkaaseneieren said:
If it's un touch than fc settings is not fixed?
Click to expand...
Click to collapse
Read the "About" section. The only change I made was include the Faux's kernel to fix the FC issue.
death1246 said:
Another question. Why is this almost 100 MB larger than almost all other releases? Is this how big it normally is? I want fully stock GE Edition and im glad someone finally did it. Almost did it myself :3
I will let you know if it works or not. Going to test the wallet app after I see my recruiter.
Click to expand...
Click to collapse
Since I did not delete any files from the original nor deodexed the rom that's the normal size at the end, no need to worry.
Let us know if Google Wallet works after flashing the modified build.prop.
Will this work on my AT&T S4?
google keep and titanium backup (back up to sdcard) is working ?
People in this post http://forum.xda-developers.com/showthread.php?t=2348272 are complaining about the phone getting hot and about not being able to save photos to SD Card. Did some one experienced any problems like these with this firmware?
I think I'll stick with JWR66V.S001.130708 for now.
xarda said:
google keep and titanium backup (back up to sdcard) is working ?
Click to expand...
Click to collapse
Google Keep is working just fine.
I don't have an SD Card to test Titanium here with me right now.
does this also have sim unlock bug?
Thanks for the ROM, and the effort of course. I was having problems with my extSdCard and will test it, and will let you know the outcome.
coilfan said:
Thanks for the ROM, and the effort of course. I was having problems with my extSdCard and will test it, and will let you know the outcome.
Click to expand...
Click to collapse
Let me know as soon as you can so I can edit the bug list in the first post. Thank you.
Enviado de meu GT-I9505G usando Tapatalk 4
MaKTaiL said:
Let me know as soon as you can so I can edit the bug list in the first post. Thank you.
Enviado de meu GT-I9505G usando Tapatalk 4
Click to expand...
Click to collapse
The ROM is, like all the other recent 4.3 ROMs, stable and fast. Unfortunately the extSdCard issue is exactly the same. Hopefully this will be resolved soon. Many thanks for the effort. :good:
---------- Post added at 06:33 PM ---------- Previous post was at 06:10 PM ----------
Just one quick question. My i9505 is currently on baseband XXUBMGA, and working fine. However, I was just wondering if it would be possible at all, and and advisable to install the stock baseband which comes with the i9505GE 4.3 version.
I did test your rom and it is pretty clean and does work really smooth indeed. But the phone becomes a lot hotter than with the previous leak and also battery seems to drain really quick while browsing with chrome. Also the sim unlock bug is still there. I just did a restore of the previous build I used.
Planet X said:
I did test your rom and it is pretty clean and does work really smooth indeed. But the phone becomes a lot hotter than with the previous leak and also battery seems to drain really quick while browsing with chrome. Also the sim unlock bug is still there. I just did a restore of the previous build I used.
Click to expand...
Click to collapse
Thanks for reporting. I updated the bug list on the first post.
Unfortunately these issues are out of my reach to fix. I know little about coding roms.
As soon as our awesome devs fix them I'll sure include in my rom for you guys.
Regarding battery life, for me it's the same. It lasts for a day if I let it on 3G but it drains like crazy with 4G.
EDIT
I was reading in another forum and the problem you have with ExtSDCard is probably because you have it formated as exFAT which the Stock Kernel does not support.
Format it as FA32 and you won't have an issue or wait for a custom kernel with the support.
MaKTaiL said:
Thanks for reporting. I updated the bug list on the first post.
Unfortunately these issues are out of my reach to fix. I know little about coding roms.
As soon as our awesome devs fix them I'll sure include in my rom for you guys.
Regarding battery life, for me it's the same. It lasts for a day if I let it on 3G but it drains like crazy with 4G.
EDIT
I was reading in another forum and the problem you have with ExtSDCard is probably because you have it formated as exFAT which the Stock Kernel does not support.
Format it as FA32 and you won't have an issue or wait for a custom kernel with the support.
Click to expand...
Click to collapse
I don't think that's the reason, because in previous stock version the SDCard in exFAT works just fine for me. But thank you for your effort! I'll keep an eye on this thread.

[ROM+KERNEL][D802][STOCK]bruce2728-d80220f[stable][fast][no bloat]

bruce2728-d80220f Stripped stock ROM
With my optimized stock kernel​
Features​
Fast, smooth and stable stock experiance
Odexed
Zipaligned
Rooted
Busybox
init.d support
Knock-code
De-bloated
Removed all play store available apps and a lot of LG apps
Replaced stock file manager with ES File Explorer
DSP Manager for enhanced audio effects and EQ
My optimized stock kernel
4k video recording - xdabbeb 3.1.0
Slow motion video recording - xdabbeb 3.1.0
Flex home theme - optional
Flex weather theme - optional
Kernel​
This ROM comes with my optimized stock kernel which can be found in this thread.
Kernel features include:
Compiled with linaro 4.8 using -o3 compiler flags
Optimized for speed and battery life
SCHEDULER: Autogroup patch
lib/memcopy: use glibc version
lib/string: use glibc version
Optimized ARM RWSEM algorithm
vfp - compile with neon
vfp: hardfloat
Removed a lot of debugging, stats, logs and tests
Updated kgsl from CAF
For a full list of changes check the commit log on my github
Download​
AndroidFileHost
md5 5895d5f7af31c37430d138a08379bca6
The download size is still 1.5 gigabye as i prefer to use a system image for a cleaner flash
and so I can setup symlinks and permissions before packag the zip.​
Install​
Reboot to recovery
Wipe data, cache and dalvik (system is wiped during install)
Install zip
No need to install SuperSU, it's already rooted.
Changelog​
V2
Fixed flac playback with DSP Manager
V3
Added Flex home theme
Added Flex weather theme
Added back sim tool kit
Updated to my latest kernel
Removed preload symlinks
Fixed some permissions that could have potentially stopped BT working correctly.
V3.1
Removed icon boarders in fles theme - used icons from cloudyfa's mod to patch theme apk
Synced kernel sound driver with stock - trying to fix in car bt audio, normal bt audo is fine
Added Flex addon to first post - contains flex theme and some flex apps
V4.0
Rebased on D80220f_00
Kernel updated to v0.2
Add-ons​
Stock kernel - Download - md5: 61dfab7e2e0983bc8a68399ca983f37b
Stock camera - Download - md5: f6df6af7f5f7be45d8fa751bc796d6ee
My kernel - Download - md5: f8e311de1b0b06ead79a476e7d1ee5b1
Flex theme and apps - Download - md5: 69dea2017fedc02eb699572f0a53a643​
Thanks​
xdabbeb - for his camera mod
Cloudyfa and bender_007 - for AutoRec​
Donations​
Donations are always wlcome and appreciated but in no way required.
If you would like to donate please follow this link.
Thank you.​
XDA:DevDB Information
bruce2728 D80220F, ROM for the LG G2
Contributors
bruce2728
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom recovery, latest kitkat firmware
Based On: Stock
Version Information
Status: Stable
Current Stable Version: v4.0
Stable Release Date: 2014-07-01
Current Beta Version: v1
Beta Release Date: 2014-05-04
Created 2014-05-12
Last Updated 2014-07-01
Reserved
For those interested in benchmarks, here are some scores i achieved using this ROM.
I have been running the v1 very nicely. The only error has been the Bluetooth audio with my car system. There was no audio. I moved to another kernel and it was resolved, but your kernel was faster. Would you mind adding the pateched stock 20d kernel in a flashable zip so we have stock as a backup alternative? Thanks for your work.
albsat said:
I have been running the v1 very nicely. The only error has been the Bluetooth audio with my car system. There was no audio. I moved to another kernel and it was resolved, but your kernel was faster. Would you mind adding the pateched stock 20d kernel in a flashable zip so we have stock as a backup alternative? Thanks for your work.
Click to expand...
Click to collapse
Yes i can do that but it may work in v2, give it a try and let me know please.
It will be up in about 40mins, I have a really slow upload speed.
If any of you are good with graphics, feel free to send me some banners and title headers for the first post.
If I use yours you will get a mention in the first post.
Thanks.
Great!! Will try it when i get home from school!:good:
Edit: Downloading....
Edit 2: Dowload keeps failing after 7% ...think you should get another upload another site...
V2 upload complete...
@bruce2728, thanks for your work!
I've been using v1 of this ROM in the last few days: very clean and smooth so far, will follow this thread.
Cheers!
Where is the flashing manual ?
@zhuchella, what do you mean?
This ROM must be flashed the same way of others: reboot your phone in recovery, wipe System, Data, Cache; flash the ROM's ZIP and SuperSU v.1.94; reboot to system.
Downloading keeps failing on v2....
---------- Post added at 02:38 PM ---------- Previous post was at 02:38 PM ----------
Downloading keeps failing...
Giocarro said:
@zhuchella, what do you mean?
This ROM must be flashed the same way of others: reboot your phone in recovery, wipe System, Data, Cache; flash the ROM's ZIP and SuperSU v.1.94; reboot to system.
Click to expand...
Click to collapse
Correct, but no need to flash SuperSU, the ROM is rooted already.
Norside said:
Downloading keeps failing on v2....
---------- Post added at 02:38 PM ---------- Previous post was at 02:38 PM ----------
Downloading keeps failing...
Click to expand...
Click to collapse
I'm in the process of getting another host for now though I'll post a temporary mirror.
It will take a while to upload, my connection is not the best.
bruce2728 said:
I'm in the process of getting another host for now though I'll post a temporary mirror.
It will take a while to upload, my connection is not the best.
Click to expand...
Click to collapse
Thanks Bruce, v1 seems to work though, will try that one first
Edit none worked will wait for new download
Running v1 for some days now, impressive balance between speed and battery-consumtion. How already mentioned, for my needs the perfect rom+kernel combo with Xposed and xdabbebs camera mod...thanx!!!
I score bellow averge
bruce2728 said:
For those interested in benchmarks, here are some scores i achieved using this ROM.
Click to expand...
Click to collapse
Dear Bruce, I've just installed you ROM (V1), and mi Antutu score is 31549 (nothing touched). I tell you this because you posted your score.
Am I doing something wrong?
By the way, I have an International D802.
Thank you very much in advance! :good:
the problem is a different MD5 goo_im V2
nostromo76 said:
Dear Bruce, I've just installed you ROM (V1), and mi Antutu score is 31549 (nothing touched). I tell you this because you posted your score.
Am I doing something wrong?
By the way, I have an International D802.
Thank you very much in advance! :good:
Click to expand...
Click to collapse
You didn't do anything wrong.
Even if the same device with the same rom, benchmark still can be different due to many reasons, such as temperature, what apps you've installed, or the minor differences among each devices.
yuyuchen0204 said:
You didn't do anything wrong.
Even if the same device with the same rom, benchmark still can be different due to many reasons, such as temperature, what apps you've installed, or the minor differences among each devices.
Click to expand...
Click to collapse
Ok, thank you for your answer, I know those things and I know benchmarks should not be trusted :silly:
By the way, I'm very happy whit this ROM, I'll report back my experiences. :highfive:
stöbener said:
Running v1 for some days now, impressive balance between speed and battery-consumtion. How already mentioned, for my needs the perfect rom+kernel combo with Xposed and xdabbebs camera mod...thanx!!!
Click to expand...
Click to collapse
It has the camera mod already.
One of the things I need to put in the thanks section.

[ROM] [7.0] [EQK1] TrueStockN Custom ROM

WORD OF CAUTION​
Code:
XDA and it's developers cannot be held accountable for device malfunction. No one is responsible for what you do to your device except [B]you[/B], or any other things that happen because [B]you[/B] tripped knox. If your alarm doesn't wake you up in time for your presidential meeting on nuclear warfare, leading to your home country getting blow to bits, its [B]your fault[/B]. :)
About Me
I'm an 18 year old living in the States. I've been installing ROMs on my phones since my first one back in 2014. However, there was always something missing from the ROMs I used. Either I was missing key device functionality, features originally excluded to my device, battery life, or edge panels, I could go on and on. But thanks to @AndroidSword, I was motivated to make that a thing of the past, and work on my own ROM. Introducing...
Click to expand...
Click to collapse
TrueStockN
Features
DE-BLOATED
DE-KNOXED
DE-ODEXED
Based on G928TUVS4EQK1 Firmware with Stock Kernel for Stability and Battery Life!
Maybe a few more I can't remember...
My first goal was to make a blank canvas for me to add all the features I want, making sure to keep the important ones and getting rid of the garbage (sorry T-Mobile). As I learn more about ROM building, I will add more things. But for now, I got as close as I could to a non-carrier device, all while keeping the things some of us like e.x. VoLTE and Wi-Fi Calling.
Click to expand...
Click to collapse
Installation Instructions
Pay attention to which version you are installing as installation for each varies!
Click to expand...
Click to collapse
NOTE: First boot will take some time since the ROM is de-odexed. Give it about 10 minutes and be patient!
Credits
Biggest thanks to @AndroidSword. If it wasn't for him I wouldn't be writing this thread right now.
@topjohnwu and his team for their continued development of Magisk
Samsung for making great devices
Sammobile for providing stock firmwares
Thanks to various guides out there teaching people like me how to work with roms
Finally bug thanks to the XDA community for being the BEST source for anything android.
Click to expand...
Click to collapse
Important Notes
The ROM will not boot without root access, and I didn't want to include supersu because of so many apps not working with failed SafetyNet. Therefore, FLASHING MAGISK IS A MUST
v1 and 2 only
Click to expand...
Click to collapse
.
Click to expand...
Click to collapse
XDA:DevDB Information
TrueStockN, ROM for the T-Mobile Samsung Galaxy S6 Edge+
Contributors
LEGONIKES
Source Code: https://www.sammobile.com/firmwares/galaxy-s6-edge-plus/SM-G928T/TMB/download/G928TUVS4EQK1/197855/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
Based On: TouchWiz
Version Information
Status: Stable
Current Stable Version: 4
Stable Release Date: 2018-03-03
Current Beta Version: 4
Beta Release Date: 2018-04-06
Created 2018-01-07
Last Updated 2018-07-21
Bugs
v1:
-none
v2:
-Small things missing, wallpaper cropper, video calling, video editor
v3:
-Reboot when calling via Bluetooth user reported
v4 beta:
-Unable to change language after initial setup
-Video Calling not working
-Bluetooth not working *fixed*
-Location not working *fixed*
-Samsung Cloud Restore, Backup, Sync not working user reported
v4 stable:
-None that I know of
-If you find something, please report it!
Installation Instructions
v1:
-Download ROM and Magisk
-Reboot into TWRP
-Wipe Dalvik, Cache, Data, and System
-Flash ROM and latest Magisk
-Reboot and enjoy!
v2:
Same as v1
v3:
-Download ROM and Camera fix
-Reboot into TWRP
-Wipe Dalvik, Cache, Data, and System
-Flash ROM and Camera fix
-Reboot and enjoy
v4 beta:
-TAKE TWRP BACKUP. This one is experimental and may or may not work for you!
-Download ROM
-Reboot into TWRP
-Wipe Dalvik, Cache, Data, and System
-Reboot
-Complete setup and reflash ROM, no wipes
-Reboot and enjoy!
v4:
-Same as v4 beta
Notes
1. Magisk Manager sometimes requires it being opened before granting root access to apps. Do that at least once after setup.
2. Viper4Android is ready for setup if you followed the directions right (v4 beta and stable). All you have to do is open the app and follow the on-screen guide (I recommend the power saving option, works same as others but doesn't destroy your battery).
3. AdAway is preinstalled but also requires user setup before it can be enabled. Open it, download sources, reboot.
4.Note users must flash a kernel after the ROM. Use your own, look one up, or use Poseidon Kernel Non-Tmobile users will also experience bluetooth related issues. If thats a problem for you, flash your own kernel. This, however, will not impact the *majority* of users, so you can run as is.
Changelog
v1:
-In Main OP
v2:
-HEAVILY debloated: lots of unnecessary stuff has been removed
-S8 Home Screen and Weather Widget
-Few CSC and build.prop mods
-Rest from v1
V3:
-DEODEXED
-DEKNOXED
-DEBLOATED
-Updated System Apps (Camera, Gallery, Phone, Messages, etc.)
-Build.prop optimizations
-Smart Call (worked in beta, having issues for stable even though i kept it the same)
-AdAway (Blocks ads, credits to XDA)
-Viper4Android Ready (still need to install busybox and other steps)
-Rooted (Magisk 16 inside rom)
Most likely more I can't remember atm...
v4 beta:
-G928T/G928F base
-Busybox installed
-Viper4Android 100% Ready
-S Pen Features
-Same as v3
v4 stable:
-SM-G928T base
-Smart Call Enabled
-Fast Boot Enabled
-S Health Working
-Wi-Fi Calling Enabled
-VoLTE Icon Enabled
-Video Calling Working
-Oreo Boot Animation Enabled
-Probably more, can't remember
DOWNLOADS
Versions 3-4
Android File Host
Camera Fix for v3 Flash after ROM
Make sure to report any issues!
Congatulations on Your first ROM buddy, you did include some good info that I didn't know, Grats again!
Installed the ROM last night. No bugs so far. I'm in India using my brother's TMO S6E+ as he has upgraded to OP5T..
Thanks a lot for your work..
Sent from my SM-N9005 using Tapatalk
Upgrade from 6.0.1?
I'm on ★[ROM] [STOCK] G928TUVU2DPD1 | 6.0.1 | Deodexed | KNOX Free | 4.22.2016 ☆ 1 2 3 by jovy23
Can I still upgrade using the above install method or do I need to put Stock Nougat using Odin?
Thank you in advance,
RJR
Same question here
Can I upgrade from 6.0.1 rooted ROM? Or perhaps I need to download the modem and bootloader of 7.0?
Thanks in advance.
---------- Post added at 02:32 AM ---------- Previous post was at 02:31 AM ----------
Same question here
Can I upgrade from 6.0.1 rooted ROM? Or perhaps I need to download the modem and bootloader of 7.0?
Thanks in advance.
Thread closed due to missing sources. Use report button when you ready to provide them
androidbadboy said:
Congatulations on Your first ROM buddy, you did include some good info that I didn't know, Grats again!
Click to expand...
Click to collapse
Thanks!
nijom said:
Installed the ROM last night. No bugs so far. I'm in India using my brother's TMO S6E+ as he has upgraded to OP5T..
Thanks a lot for your work..
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
How has the rom worked for you in the long term? Battery life, etc.
rrusek said:
I'm on ★[ROM] [STOCK] G928TUVU2DPD1 | 6.0.1 | Deodexed | KNOX Free | 4.22.2016 ☆ 1 2 3 by jovy23
Can I still upgrade using the above install method or do I need to put Stock Nougat using Odin?
Thank you in advance,
RJR
Click to expand...
Click to collapse
The rom includes all the files you need to function correctly. Should install no issue. Make sure to wipe dalvik, cache and system.
LEGONIKES said:
The rom includes all the files you need to function correctly. Should install no issue. Make sure to wipe dalvik, cache and system.
Click to expand...
Click to collapse
LEGONIKES can You offer assistance with that ROM of Yours? Can You give support? Are You willing to answer all the questions?
androidbadboy said:
LEGONIKES can You offer assistance with that ROM of Yours? Can You give support? Are You willing to answer all the questions?
Click to expand...
Click to collapse
Of course
androidbadboy said:
Well, I;m not getting any help from You, so you're a liar!
Click to expand...
Click to collapse
How can I be of assistance?
Thread Cleaned
XDA Forum Rules​
FSadino Sorry and again Thank You for assistance.
LEGONIKES said:
How has the rom worked for you in the long term? Battery life, etc.
Click to expand...
Click to collapse
great so far. I am using the S6E+ as my secondary phone. so I haven't pushed it intensively. Battery and RAM usage are so good as its debloated
LEGONIKES said:
DOWNLOADS
TrueStockN v1
TrueStockN v2
TrueStockN v3- coming soon!
Make sure to report any issues!
Click to expand...
Click to collapse
v2 is now live! If coming from v1, dirty flash works no problem. If first TrueStockN installation, wipe dalvik, cache, and system before flash. Install Magisk after rom!
as soon as my phone is done charging I will give this a try. I have not done any roms but one aos6.01 autra light ROOTED ROM.... I will post my feedback. THANK YOU for the time and effort people like myself really appreciate what you do.
AFFAFXP said:
as soon as my phone is done charging I will give this a try. I have not done any roms but one aos6.01 autra light ROOTED ROM.... I will post my feedback. THANK YOU for the time and effort people like myself really appreciate what you do.
Click to expand...
Click to collapse
Can You upload to different service than Google or Microsoft Please. If that makes some king of a problem than ok.

PIE OneUI 1.0 xFire ROM + custom boot logo v1.4

xFireFist Presents: xFire ROM for the Galaxy S7
Based on android pie for the Galaxy Note FE, this rom provides a speedy yet stable experience for those who want the most out of their Galaxy S7.
Aggressively de-bloated for even more free memory!
Youtube Vanced is pre-installed for smooth and ad-less Youtube video watching.
Please note that version 1.3 is not pre-rooted meaning you will have to install magisk yourself!
v1.1 notes:
- Facebook App updater has been removed
- Samsung Health has been removed
- GearVR has been removed
- Bixby services and Bixby Home has been removed
- Magisk v19.4
- Youtube Vanced is pre-installed
v1.2 notes:
- Getting rid of Samsung cloud :good:
- Getting rid of Galaxy wearable :good:
- Getting rid of GearVr service :good:
- Getting rid of SVoice :good:
- More de-bloating and optimizing :good:
- Magisk v20 :good:
v1.3 notes:
- S9 Wallpapers :good:
- Latest Magisk manager Canceled
- Newer security patch (if possible) :good:
- Google TTS was removed :good:
- Samsung GearManager was removed :good:
- Youtube Vanced was removed :good:
v1.3.1 hotfix notes:
- Changing the model to G930 :good:
- Due to the lack of an iris scanner on the Galaxy S7, this feature will be removed :good:
- Inclusion of more CSC (if possible) Canceled till the next major update
v1.3.2 April 1st notes:
- Making an android 10 build (G960FXXS7DTB5 as a base) :good:
- Porting the kernel from lineage to work with samsung android 10 based rom :good:
- March security patch :good:
- April fools :good:
v1.4 notes:
- May security patch :good:
- Fixed issues regarding the default keyboard :good:
- Removed the iris unlock option (hopefully) :good:
- Restored the build fingerprint so SaferyNet passes :good:
Download Links :
AndroidFileHost: https://www.androidfilehost.com/?w=files&flid=301550
Mediafire: http://www.mediafire.com/folder/k884fzb1kwylz/PIE9_OneUI_xFire_ROM
Big thanks to : vovadvnovlineru as this rom is based on his , morogoku for the Moro Kernel and Vanced Team for Youtube Vanced!
XDA:DevDB Information
xFire, ROM for the Samsung Galaxy S7
Contributors
xfirefist, xfirefist
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Atleast TWRP 3.2.1, unlocked bootloader
Version Information
Status: Stable
Current Stable Version: 1.4
Stable Release Date: 2019-10-13
Current Beta Version: 1.1
Beta Release Date: 2019-10-08
Created 2019-10-08
Last Updated 2020-05-22
1st ?
2st
3rd
looks great but i use heart monitor for health tracker apps ...will this work without Samsung Health
KevMetal said:
looks great but i use heart monitor for health tracker apps ...will this work without Samsung Health
Click to expand...
Click to collapse
Im not sure, the health service is still present so it might. Go ahed and give it a shot.
PS You can download samsung health from the playstore
xfirefist said:
Im not sure, the health service is still present so it might. Go ahed and give it a shot.
PS You can download samsung health from the playstore
Click to expand...
Click to collapse
yeah well i guess what is important is health service running so maybe my question was badly phrased..i dont use samsung health ..i just need other health application to open sensors on phone ..in some rom they fc or cant open sensor error ..*even with correct permissions*
i will try it later when i have time cos stock based rom is always big size and takes time to download if you dont run on fibre optics
Secure folder is working in this Rom?
what about s7 edge
symlink failed
zafarali1981 said:
Secure folder is working in this Rom?
Click to expand...
Click to collapse
The secure folder is present but only usable by a few system apps, you aren't able to use it since this rom is de-knoxed
berrar said:
what about s7 edge
Click to expand...
Click to collapse
Not sure, you can try and tell me if it works!
dngur521 said:
symlink failed
Click to expand...
Click to collapse
Did you do a full wipe? (Backup your data before you do that)
-Dalvik
-Cache
-System
-Data
Im very happy to announce that xFire ROM has reached version 1.2, it comes with alot of changes plus optimizations and as always delivering the best possible ~
v1.2 changes:
- Samsung cloud was removed :good:
- Galaxy wearable was removed :good:
- GearVr service was removed :good:
- SVoice was removed :good:
- More de-bloating and optimizing :good:
- Magisk v20 :good:
Download link: https://www.mediafire.com/folder/k884fzb1kwylz/PIE9_OneUI_xFire_ROM
Any screenshots?
gonzolex said:
Any screenshots?
Click to expand...
Click to collapse
Screenshots are avaliable in the Screenshots tab, right next to Discussion.
Link: https://forum.xda-developers.com/devdb/project/?id=34741#screenshots
ussd code not work
could this version of kenrel (7.3) work?
https://androidfilehost.com/?fid=1899786940962593152
Yes this Kernel works, but for me old one feels smoother.
Gesendet von meinem SM-G930F mit Tapatalk
jpower73 said:
could this version of kenrel (7.3) work?
https://androidfilehost.com/?fid=1899786940962593152
Click to expand...
Click to collapse
Most likely it works.
Good work !
i installed this rom a week ago and i find it smooth and beautiful
but there is some improvement the dev can make:
the brightness when in auto mode is too low.
when streaming video to chromecast it disconnect after a while, so I can no more use my S7 as a remote control
anyway nice rom, hope you will continue the dev of it !
nirsanyou said:
Good work !
i installed this rom a week ago and i find it smooth and beautiful
but there is some improvement the dev can make:
the brightness when in auto mode is too low.
when streaming video to chromecast it disconnect after a while, so I can no more use my S7 as a remote control
anyway nice rom, hope you will continue the dev of it !
Click to expand...
Click to collapse
Thank you very much for the support!
I don't own a chromecast so im unable to replicate such problem, i will look into the auto brightness sometime and last but no least planned updates will include updates to system apps, updated magisk and security patches untill the base of the firmware is changed.

Categories

Resources