Develop Bugs

[XAP] HTC Test Tool

maybe a solution for usb storage error,zune sync problem error .
http://forum.xda-developers.com/showthread.php?t=1212915
use at your own risk. this apps can brick your device.
attached zip contain:
HTC BATTERY TOOL.xap
RegisterEdit.xap
USBModeSwitch.xap
DebugFlagEdit.xap
HTCGPSTool.xap
StressTool.xap
StorageFullTool.xap (REMOVED DO NOT USE IT)
GCFSettings.xap
To use this apps 1st install the attached certificate.
(like for chevron.cer by sending a mail to your device)
then deploy xap.
tested on HTC Trophy
DO NOT USE StorageFullTool.xap FULL TEST!!
AN USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
use at your own risk. I take no
responsibility for any conflict, fault, or damage caused by
this tools.
DO NOT ASK ME FOR THE FILES
SEARCH IN THE THREAD.
use at your own risk. I take no
responsibility for any conflict, fault, or damage caused by
this tools.

lemme test

any chance of the youtube app?

digger1985 said:
any chance of the youtube app?
Click to expand...
Click to collapse
you can check this thread http://forum.xda-developers.com/showthread.php?t=894502
or maybe, you want to look here webcache[dot]googleusercontent.com/search?q=cache:http://thounsell.co.uk/2010/12/chevronwp7-now-without-the-sideload-limit/

DO NOT USE StorageFullTool.xap FULL TEST an USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
IF SOMEONE AS A SOLUTION WITHOUT OPENING THE DEVICE THAT CAN BE NICE.

DO NOT USE StorageFullTool.xap FULL TEST an USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
Click to expand...
Click to collapse
Before I had read it, my finger was too quick. "0" Storage
Now it has happened and hope someone has found a way to solve the problem.
Proposals will be gratefully received.
I think it is better to remove the tool. ;-| (Thanks xbaxmod for remove.)
Thanks a lot for help.

remplace the Storage.
To you have the StorageFullTool.xap application?

Unable to switch back to zune mode
xboxmod said:
Hi
i have successfully patch Xap from Htc Mozart Test Rom
to deploy it on our HTC unlocked device.
You can download HTC hub unlocked here an old version just for test on other device.
attached zip contain:
HTC BATTERY TOOL.xap
RegisterEdit.xap
USBModeSwitch.xap
DebugFlagEdit.xap
HTCGPSTool.xap
StressTool.xap
StorageFullTool.xap (user report no storage detected after start test take care)
GCFSettings.xap
To use this apps 1st install the attached certificate.
(like for chevron.cer by sending a mail to your device)
then deploy xap.
tested on HTC Trophy
DO NOT USE StorageFullTool.xap FULL TEST AN USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
IF SOMEONE AS A SOLUTION TO FORMAT STORAGE WITHOUT OPENING THE DEVICE THAT CAN BE NICE
use at your own risk. I take no
responsibility for any conflict, fault, or damage caused by
this tools.
Thread related to this:
[APP] XAP_Dll_Signer 0.1 (unlock All Xap)
[XAP] Samsung Omnia 7 apps for HTC
HTC HUB Custom Theme
Click to expand...
Click to collapse
Hi there, thanks for this greate tools. I've try some. unfortunately for USBModeSwitch.xap, once installed then please never try to switch to DIAG mode. this will caused you cant sync your device (in my case HTC HD7) with zune. then when device restarted, system popup, the application has been REVOKE my microsoft, please uninstall (with only OK button). Bamm... then I only have choice to click ok button. After that the application has been uninstall. Followed by other apps that has install using application deployment.
So my problem now is, i cant turn my device back to ZUNE mode. demmm~ is that really the apps has been revoke by Microsoft? demm again... all apss install with apps dep. gone.

pth6 said:
remplace the Storage.
Click to expand...
Click to collapse
This I have done it twice, each time the same result: "0 " storage.
Have almost no memory cards. ;-/
pth6 said:
To you have the StorageFullTool.xap application?
Click to expand...
Click to collapse
Not longer on my phone, on my PC yes.
Its also a problem, without storage, you cant make a Mail-Account on the phone for the Unlocking and install the .cert*. :-(
Other solutions or help please?

Ddriver said:
This I have done it twice, each time the same result: "0 " storage.
Have almost no memory cards. ;-/
Not longer on my phone, on my PC yes.
Its also a problem, without storage, you cant make a Mail-Account on the phone for the Unlocking and install the .cert*. :-(
Click to expand...
Click to collapse
I know I have the same problem. I dont have tested replace the memory by a new on. => SAV

AzmanIshak said:
Hi there, thanks for this greate tools. I've try some. unfortunately for USBModeSwitch.xap, once installed then please never try to switch to DIAG mode. this will caused you cant sync your device (in my case HTC HD7) with zune. then when device restarted, system popup, the application has been REVOKE my microsoft, please uninstall (with only OK button). Bamm... then I only have choice to click ok button. After that the application has been uninstall. Followed by other apps that has install using application deployment.
So my problem now is, i cant turn my device back to ZUNE mode. demmm~ is that really the apps has been revoke by Microsoft? demm again... all apss install with apps dep. gone.
Click to expand...
Click to collapse
I've got the same problem, not even a hard reset switches it back to zune mode, i'll prob have to take my Mozart back to the shop wish I had read this earlier...

feygor said:
I've got the same problem, not even a hard reset switches it back to zune mode, i'll prob have to take my Mozart back to the shop wish I had read this earlier...
Click to expand...
Click to collapse
try to unlock and relock with chevronwp7 again install USBModeSwitch.xap and swish to zune

feygor said:
I've got the same problem, not even a hard reset switches it back to zune mode, i'll prob have to take my Mozart back to the shop wish I had read this earlier...
Click to expand...
Click to collapse
flash a new rom

So, we should not use ANY of the tools? Which xap is safe to run at the moment?

Can anyone upload the StorageFullTool.xap? I would like to take a closer look at how it works.
Thank you

martani said:
Can anyone upload the StorageFullTool.xap? I would like to take a closer look at how it works.
Thank you
Click to expand...
Click to collapse
Attached file:

martani said:
I would like to take a closer look at how it works.
Click to expand...
Click to collapse
Thank you for your interest to help.
It looks as if this tool by software locks the storage card.
In the bootloader mode is selected 16GB like the size from the storagecard.

I don't have an HTC device (I have the Samsung Omnia 7), and I want to understand what happens after you use the StorageFullTool.xap
From the source code, it calls driver2.myIOCTL_SetStorageFullStatus(false, ref uRetStatus); then driver2.myIOCTL_ClearStorage(ref uRetStatus); to clear the storage it seems.
The same source code has a function called Thread_EnableFullTest which calls simply driver2.myIOCTL_SetStorageFullStatus(true, ref uRetStatus);
and driver2.myIOCTL_ClearStorage(ref uRetStatus);
The question now is, can you use your device at all? if yes can you install apps on it?

martani said:
I don't have an HTC device (I have the Samsung Omnia 7), and I want to understand what happens after you use the StorageFullTool.xap
From the source code, it calls driver2.myIOCTL_SetStorageFullStatus(false, ref uRetStatus); then driver2.myIOCTL_ClearStorage(ref uRetStatus); to clear the storage it seems.
The same source code has a function called Thread_EnableFullTest which calls simply driver2.myIOCTL_SetStorageFullStatus(true, ref uRetStatus);
and driver2.myIOCTL_ClearStorage(ref uRetStatus);
The question now is, can you use your device at all? if yes can you install apps on it?
Click to expand...
Click to collapse
Currently, there is this:
- No storage because the operating system needs everything.
- 13.03 MB Storage total.
- No Windows Live Mail account or POP mail possible, as no storage.
- No, nothing possible to install or using. :-(
Connect with Zune is possible, only without else to sync.
Hope this help you.

xboxmod said:
Attached file:
Click to expand...
Click to collapse
did you got the regedit xap working ?
(I cant read anything )

[Q] Dead screen, I need screenshots

My HTC One X has a dead screen. The actual OS, lights and touch digitizer work as they should.
I have a lot of documents and photos on the phone that I would love to get off the phone via USB, but I cant quite get to the settings page without a screen.
If there is a way to pull the data off without having to go into the settings and set USB to file transfer, or if someone can send screenshots so I can see where to tap, that would be great.
I need a screenshot of the password screen (keypad), the settings screen all the way until i get to the usb screen, if anyone would please.
Thanks. First thread.

What recovery do you have (a custom one?) You can boot into that and enable ums and then retrieve data.
I may guide you

RE
Mr Hofs said:
What recovery do you have (a custom one?) You can boot into that and enable ums and then retrieve data.
I may guide you
Click to expand...
Click to collapse
Recovery? I dont know what you are talking about, so I believe i use stock. I stumbled upon a different way to get the files off via a hack on a different thread, but its ADB hack. Im a little clueless with this, but if you could guide me that would be appreciated.
The other thread i found is here: http://forum.xda-developers.com/showthread.php?t=1573744

Ah you are fully stock, no unlocked bootloader and custom rom ?
Well at least we can try this :
Download android SDK bundle (Google ) and unpack it to lets say :
C:\android
So we can find it easily ! Navigate with windows explorer to that folder and unfold the folders to a folder named "platform-tools" and check that you have adb.exe inside that folder.
Hold down shift and right click the mouse, select "open command window here.
Now connect the phone and type :
Adb devices in the command window

TehEngineer said:
My HTC One X has a dead screen. The actual OS, lights and touch digitizer work as they should.
I have a lot of documents and photos on the phone that I would love to get off the phone via USB, but I cant quite get to the settings page without a screen.
If there is a way to pull the data off without having to go into the settings and set USB to file transfer, or if someone can send screenshots so I can see where to tap, that would be great.
I need a screenshot of the password screen (keypad), the settings screen all the way until i get to the usb screen, if anyone would please.
Thanks. First thread.
Click to expand...
Click to collapse
well you should follow MR HOFS he will guide you easily but on your request here is the lock screen

RE
Mr Hofs said:
Ah you are fully stock, no unlocked bootloader and custom rom ?
Well at least we can try this :
Download android SDK bundle (Google ) and unpack it to lets say :
C:\android
So we can find it easily ! Navigate with windows explorer to that folder and unfold the folders to a folder named "platform-tools" and check that you have adb.exe inside that folder.
Hold down shift and right click the mouse, select "open command window here.
Now connect the phone and type :
Adb devices in the command window
Click to expand...
Click to collapse
It says "List of devices attached" and nothing else, then goes back to where it was. My phone does come up in "My computer" as drive K, but it cant be opened, probably due to the phone not allowing access, yknow when you hook it up it asks what you want it to do with the USB, like sync or charge, but its defaulted to charge only. But yeah, ADB DEVICES doesnt really do anything as far as I notice.

Then you probably have the problem that usb debugging is not enabled
You are on JB .... do you know how to get the phone on its homescreen ?

RE
Mr Hofs said:
Then you probably have the problem that usb debugging is not enabled
You are on JB .... do you know how to get the phone on its homescreen ?
Click to expand...
Click to collapse
Yeah, but I have no way of telling if im on the home screen or if im tapping the right buttons, which is why i asked for a screenshot. Not trying to sound rude.

Open ddms
Sent from my HTC One X using xda premium

Yeah open ddms ?!? Thats what i call short info.
You got your screenshot. If you are on the homescreen after the pincode the MTP should be enabled and your sdcard should be accessible

RE
Mr Hofs said:
Yeah open ddms ?!? Thats what i call short info.
You got your screenshot. If you are on the homescreen after the pincode the MTP should be enabled and your sdcard should be accessible
Click to expand...
Click to collapse
I tried to enter the code a few times, ive tried ADB every attempt. Ill keep trying until something happens.

RE
TehEngineer said:
I tried to enter the code a few times, ive tried ADB every attempt. Ill keep trying until something happens.
Click to expand...
Click to collapse
I had no luck unlocking the phone. I believe I did, but it still didnt show up on the command prompt.
Im sorry I dont have much knowledge on android, but i presume there is no way to directly pull data from the device, without having to unlock it, correct?
Edit
I dont think the digitizer is functioning anymore. I cannot get any touch response out of it anymore. Is it a goner?

Re
I cant get any response out of it anymore. Am I out of options?

Unfortunately yes.....

RE
Mr Hofs said:
Unfortunately yes.....
Click to expand...
Click to collapse
Alright. thanks for the help though.

Yeah well ! Can't think of any other solution !

Mr Hofs said:
Yeah well ! Can't think of any other solution !
Click to expand...
Click to collapse
I just had one last thing to add.
Sorry for the late reply, but, It still has internet connection and I can install an app from the Play store remotely. I just cant run it due to the broken screen, but, if possible, is there a remote-access app that doesnt require setup that you know of? Or an app that enables file access somehow, Im not sure.
Or im still out of options. thanks again for your attention.

[Guide]Unlocking Android Protection Code Without Reset Or Root

THIS METHOD WILL NOT WORK IN NEWER VERSIONS OF ANDROID
Click to expand...
Click to collapse
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
Requirements
Links
1.Download Android Multi Tools- Click Here
2.Universal Adb Drivers - Click Here
Click to expand...
Click to collapse
.
.
Now lets begin
1.First unpack the tool.
2.Then install the adb driver.
3.Turn on your phone and connect it to pc via data cable.
4.Now press 1 to check if your device is connected properly.
5.Now if you have pin,password or face-lock please press 2.
6.If you have pattern lock then press 3.
7.Device will reboot and it will be unlocked.
8.If it still shows pattern,pin or password enter window simply simply give any to unlock.
Click to expand...
Click to collapse
.
.
Other action that can be done by this program are below
.
Choice detail
1.check device for check connection of device to pc.
4.reset gmail for reset gmail login after try many time wrong unlock
5.wipe data for reset all data to factory setting.
6.reboot for reboot device to normal mode or exit from adb shell.
7.check device on fastboot mode for check connection of device to on fastboot mode.
8.wipe data / cache on fastboot mode for erase user datat and cache on fastboot mode to resolve freeze,stuk on boot logo or slow down device. That is often found in the cpu spreadtrum sc6280/sc8810.
9.exit fastboot mode for reboot your pc or exit fastboot.
0.go to command promt for entering dos promt.you can use command in this soft folder and can return to the main program by type exit
s.software info for info cpu inside,firmware version and etc.
H.hardware info for determine the ic number of gsensor,touch screen,camera,wifi and more
Click to expand...
Click to collapse
.
.
.
thanks for reading this post
Written By
Pranto Roy
XDA
Click to expand...
Click to collapse

Links
1.download android multi tools- http://d-h.st/rCh
2. universal adb drivers - http://adbdriver.com/upload/AdbDriverInstaller.exe

prantoroy said:
Links
1.download android multi tools-
2. universal adb drivers -
Click to expand...
Click to collapse
thanks
my younger bro face this problem yesterday and today i got ans
will try and update

Jpjayesh said:
thanks
my younger bro face this problem yesterday and today i got ans
will try and update
Click to expand...
Click to collapse
Sure Please Update

Thnks
Sent from my HTC One X using xda app-developers app

chrisb906 said:
Thnks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
hmm. . . gud
share it!!

Unfortunately, I was not at my work machine.
Pranto Roy said:
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
.
.
.
.
.
.
.
Click to expand...
Click to collapse
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer

Tiszaba said:
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer
Click to expand...
Click to collapse
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question

Pranto Roy said:
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question
Click to expand...
Click to collapse
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?

Tiszaba said:
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?
Click to expand...
Click to collapse
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.

Pranto Roy said:
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.
Click to expand...
Click to collapse
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."

Tiszaba said:
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."
Click to expand...
Click to collapse
I'll Get The Drivers

ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI

ghepier said:
ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI
Click to expand...
Click to collapse
If It Recognized Ur Device It Will Work
And Please Add Details
Eg. What Error Message etc.

Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?

Fossil_Sioux said:
Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?
Click to expand...
Click to collapse
That Is The Exact Process
I'll test it On S3

Didn't work on Motorola XT901
Thanks for supplying such a tool, unfortunately I tried it and had the same result has Fossil_Sioux on a Motorola XT901. Phone is recognized and when I select option 2 it reboots, but the lock screen is still displayed. I enter in any random pin and it just prompts me to try again. Any suggestions?

thanks
thanks for your time in posting this information because i find it very helpful

Nice
Nice thread...thnx man.

Devill007 said:
Nice thread...thnx man.
Click to expand...
Click to collapse
Thanks

[Q] MTP USB Device?

I thought I was doing great after uninstalling bloatware. However, when I tried to connect my Note 2 to my PC via USB I received the error that MTP USB Device driver could not be loaded. Apparently I must have uninstalled something on my Note 2 that is not allowing me to connect to the PC via USB. I have been searching for days, read many postings with the same problem, downloading various Driver apps to no avail. I even downloaded and installed Samsung Drivers which also did not work. I still can use my USB plug from NOTE 2 to my Flash Drive to get stuff transfered to/from Note2/PC.
It never ends. Fix one thing and then another pops up. LOL
What else can I say except - H-E-L-P.

What de-bloater tool did you use ?
Does it show the apps it uninstalled ?
By default any de-bloater should only delete apps from /system/app and
/data/app.
Have you considered starting over by flashing root injected stock Rom?
Sent from my SGH-T889 using xda app-developers app

ciphercodes said:
What de-bloater tool did you use ?
Does it show the apps it uninstalled ?
By default any de-bloater should only delete apps from /system/app and
/data/app.
Have you considered starting over by flashing root injected stock Rom?
Click to expand...
Click to collapse
I did not use any de-bloater. I used Titanium Backup Pro (TBP) and have a complete list of all apks uninstalled.
In TBP under Backup/Restore all apks uninstalled are listed. Plus, I kept a list of all that I deleted.
No, I have not considered starting over by flashing root injected stock ROM. Thought about it, however, if I
do flash, I'm back to square one.
If I don't resolve this one problem, I will remain at this point until new OS comes out. I do have a work around for time being.
I do appreciate your help, time and concern. Thank you.
What really amazes me is that this problem is all over the Internet and I can't find a simple solution. I have Googled it,
been on here doing searches, reading postings, etc. I have even tried Driver Booster.

asctony said:
I did not use any de-bloater. I used Titanium Backup Pro (TBP) and have a complete list of all apks uninstalled.
In TBP under Backup/Restore all apks uninstalled are listed. Plus, I kept a list of all that I deleted.
No, I have not considered starting over by flashing root injected stock ROM. Thought about it, however, if I
do flash, I'm back to square one.
If I don't resolve this one problem, I will remain at this point until new OS comes out. I do have a work around for time being.
I do appreciate your help, time and concern. Thank you.
What really amazes me is that this problem is all over the Internet and I can't find a simple solution. I have Googled it,
been on here doing searches, reading postings, etc. I have even tried Driver Booster.
Click to expand...
Click to collapse
Sometimes we miss something small and obvious. Have you disabled USB debugging mode in Developer options?

AE74 said:
Sometimes we miss something small and obvious. Have you disabled USB debugging mode in Developer options?
Click to expand...
Click to collapse
Yes, I just tried that based on your suggestion. However, still got the same: MTP USB Device error. Thanks for your help.

asctony said:
Yes, I just tried that based on your suggestion. However, still got the same: MTP USB Device error. Thanks for your help.
Click to expand...
Click to collapse
Can you check your phone setting by dialing *#7284#?
Method 3 on the link below.
http://www.danrichard.com/2013/06/1...nect-to-pc-via-usb-with-unknown-device-error/

AE74 said:
Can you check your phone setting by dialing *#7284#?
Method 3 on the link below.
http://www.danrichard.com/2013/06/1...nect-to-pc-via-usb-with-unknown-device-error/
Click to expand...
Click to collapse
Tried this and again no success.
Method 3 – Ensure you have the right settings By default my phone was already set to the right settings for USB file transfers so I’ll assume most of these ship with the same configuration, hence why I have this as method 3. I found this on a forum and while it did not work for me, it seems a few other folks declared it a success.
1. Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!) When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
I did not get any option that allowed me to change the USB Connection settings when I entered *#7284#. So I dialed that number and got an error Unable to process request.
Tried new USB cable and it still tried to load/install device drivers but not successful. Same error MTP USB Device Failed.
Thanks again for trying to help. I do appreciate your help and time. Still looking for a resolution.

asctony said:
Tried this and again no success.
Method 3 – Ensure you have the right settings By default my phone was already set to the right settings for USB file transfers so I’ll assume most of these ship with the same configuration, hence why I have this as method 3. I found this on a forum and while it did not work for me, it seems a few other folks declared it a success.
1. Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!) When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
I did not get any option that allowed me to change the USB Connection settings when I entered *#7284#. So I dialed that number and got an error Unable to process request.
Tried new USB cable and it still tried to load/install device drivers but not successful. Same error MTP USB Device Failed.
Thanks again for trying to help. I do appreciate your help and time. Still looking for a resolution.
Click to expand...
Click to collapse
Perhaps you may not have the system file Phone Utility 1.0.0 or corrupted.

AE74 said:
Perhaps you may not have the system file Phone Utility 1.0.0 or corrupted.
Click to expand...
Click to collapse
Yes, I do have Phone UTL as shown in TBP. How do I access it? I can't under the Method 3.

asctony said:
Yes, I do have Phone UTL as shown in TBP. How do I access it? I can't under the Method 3.
Click to expand...
Click to collapse
I am trying to find out if you have all the files and compare with my files to find out why I can access phone utility and you can't. Your issue may be the driver or files idk. Tbh, I am not an expert. Just another android enthusiast trying to help. I have Tweaked Rom so mine may be different. I have found 2 system files in TBU, Service Mode and MTP Application. Do you have them also? Does service mode work for you when you dial, for example, *#0011#?

SUCCESS-Thanks to Y-O-U!!!!
AE74 said:
I am trying to find out if you have all the files and compare with my files to find out why I can access phone utility and you can't. Your issue may be the driver or files idk. Tbh, I am not an expert. Just another android enthusiast trying to help. I have Tweaked Rom so mine may be different. I have found 2 system files in TBU, Service Mode and MTP Application. Do you have them also? Does service mode work for you when you dial, for example, *#0011#?
Click to expand...
Click to collapse
Yes, I uninstalled both of those. Re-installed both Service Mode and MTP Application, powered off both PC and Note 2. Rebooted, USBd Note 2 to PC and SUCCESS!!!!!!!!!
Thank you very much for your help!!!!! You are no longer a Jr. U R A SR!!!

Unlocked Nokia, No access via USB on the PC ?

Hey all,
I just used root tool yesterday (http://forum.xda-developers.com/win.../jailbreak-interop-unlock-windows-10-t3178140 )and I loss access on my PC.
This is a Nokia 929 (Verizon ICON) with build 10512 on it.
When I connect to a PC, I get the noise on my phone (and slow charging message) but, the PC does nothing, does not see a connection. Tried 3 different PCs and rebooted my phone in between. I need to transfer files on and off the phone.
Any idea on how to fix this WITHOUT hard resetting ?

DavidinCT said:
Hey all,
I just used root tool yesterday (http://forum.xda-developers.com/win.../jailbreak-interop-unlock-windows-10-t3178140 )and I loss access on my PC.
This is a Nokia 929 (Verizon ICON) with build 10512 on it.
When I connect to a PC, I get the noise on my phone (and slow charging message) but, the PC does nothing, does not see a connection. Tried 3 different PCs and rebooted my phone in between. I need to transfer files on and off the phone.
Any idea on how to fix this WITHOUT hard resetting ?
Click to expand...
Click to collapse
Keep it connected for 10 minutes on the pc. If it doesn't show, unplug and plug it again.
You "lose" access to your phone from the pc because you enabled Full MTP. Enabling Full MTP your phone need to list ALL files and folder and not only your common folder like Documents and so on but also system files from the root of the phone (C:\).
You don't need of that. Deploy CustomPFD, open it, go to tweaks page > General tweaks, Utilities (page), on full fs access, enable it and then disable it.
Unplug and replug it and you have done.

This seems to be an issue with the MTP protocol being unable to handle the sheer amount of files and causing the driver to crash sometimes.
Currently, I have the HKLM\Software\Microsoft\MTP\DataStore key set to C:\Data\Users and it works fine that way. I modify this path according to what I want to access, instead of having it set to the root of C:\.

ADeltaX said:
Keep it connected for 10 minutes on the pc. If it doesn't show, unplug and plug it again.
You "lose" access to your phone from the pc because you enabled Full MTP. Enabling Full MTP your phone need to list ALL files and folder and not only your common folder like Documents and so on but also system files from the root of the phone (C:\).
You don't need of that. Deploy CustomPFD, open it, go to tweaks page > General tweaks, Utilities (page), on full fs access, enable it and then disable it.
Unplug and replug it and you have done.
Click to expand...
Click to collapse
Thanks ! Tried that, it didn't work
acewing905 said:
This seems to be an issue with the MTP protocol being unable to handle the sheer amount of files and causing the driver to crash sometimes.
Currently, I have the HKLM\Software\Microsoft\MTP\DataStore key set to C:\Data\Users and it works fine that way. I modify this path according to what I want to access, instead of having it set to the root of C:\.
Click to expand...
Click to collapse
Tried that it worked, maybe a combo of both did it... Thanks to both of you !
What folder on the C: drive is where the apps are stored, wanted to check a setting for a game....?

DavidinCT said:
Thanks ! Tried that, it didn't work
Tried that it worked, maybe a combo of both did it... Thanks to both of you !
What folder on the C: drive is where the apps are stored, wanted to check a setting for a game....?
Click to expand...
Click to collapse
Android stored apps or WP stored apps?

ADeltaX said:
Android stored apps or WP stored apps?
Click to expand...
Click to collapse
WP apps...

Mine had some weird issue that USB wasn't even recognized when Windows 10 was booted, but while booting it's still recognized... Thou, I already fixed it with a factory reset....
Sent from Ponyville

DavidinCT said:
WP apps...
Click to expand...
Click to collapse
U:\PROGRAMS or C:\Data\PROGRAMS