5.1.1. and Xposed - What are the correct files? - Galaxy Tab Pro 12.2, 10.1, 8.4 Q&A, Help & Trouble

Can anyone tell me what are the correct Xposed files to use with a custom ROM like CM 12.1 (Lp 5.1.1.)?
I've tried some from this thread http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
But, I think I'm using the wrong Xposed framework zip. I've tried "xposed-v71-sdk21-arm-arter97-V6-snapdragon.zip" (which I think is the latest) and "xposed-v65-sdk21-arm-arter97-V5-generic.zip", both fail when flashing.
Thank you.
Edit: Using Tab Pro 8.4

Related

Xposed

Hello im on latest snapshot of cm12.1 and I want to ask how to install xposed on my device . I tried flashing xposed for 5.1 from xda but I ended up bootlooping. Thank you!
Flash the zip in recovery. Then install apk. good luck.
I think that's the zip that soft bricked my phone Anyway I'll try again thank you!
Have anyone tried that on latest snapshot?
Charlie said:
Have anyone tried that on latest snapshot?
Click to expand...
Click to collapse
I tried it yesterday when i flashed latest resurrection remix LP 5.1.1 ROM. It worked.
I used obb on sd module and it worked. Previously it also worked on one of the cm
snapshot builds. No bootloops. Maybe you are flashing any other kernel that is causing
bootloop. Clean flash once more. ROM+Xposed. If it boots then u can go on and install
gapps and any other addons.
Xposed v74 sdk22 makes bootloops on latest snapshot and v75 sdk22 doesn't. Tested and working fine. If You want more info about installing etc. I was writing about it in CM12.1 thread.
Chamelleon said:
Xposed v74 sdk22 makes bootloops on latest snapshot and v75 sdk22 doesn't. Tested and working fine. If You want more info about installing etc. I was writing about it in CM12.1 thread.
Click to expand...
Click to collapse
Thank you for the info :good:

Phone booting into safe mode after flashing Xposed

Hi.
I have a rooted Wileyfox Swift with Temasek's UNOFFICIAL Build v18.5 [2015-12-08] and Unofficial TWRP 2.8.7.1 which were all found on xda (thank you!)
I am an android enthusiast and attempted to flash the xposed framework. When it completed, I rebooted and the device went into safe mode. After soft rebooting, I launched xposed but it still said that the device was not supported (same as before) as it runs lollipop.
Please if anybody knows the answer let me know as I've used xposed previously and love it.
Thank you!
silasnicholls said:
Hi.
I have a rooted Wileyfox Swift with Temasek's UNOFFICIAL Build v18.5 [2015-12-08] and Unofficial TWRP 2.8.7.1 which were all found on xda (thank you!)
I am an android enthusiast and attempted to flash the xposed framework. When it completed, I rebooted and the device went into safe mode. After soft rebooting, I launched xposed but it still said that the device was not supported (same as before) as it runs lollipop.
Please if anybody knows the answer let me know as I've used xposed previously and love it.
Thank you!
Click to expand...
Click to collapse
Have not tred on Temasek's ROM but I am using CM12.1 with Xposed. Ummm might I ask what Xposed did you Flash? Try flashing the latest version and see. Also wipe your dalvik cache and cache. That worked for me
Make sure it is Xposed v79 sdk 22 ARM64
Fixed it! Turns out I was using the 2.7 apk not 3.0 alpha!

Does Xposed work with Note 10.1 (2014 edition) on Lollipop v5.1.1?

Is there a version of Xposed that works with the Note 10.1 2014 edition running Samsung stock Lollipop v5.1.1?
Yes. Use the wanam's version for Samsung. I'm currently on his latest release (version 79 I believe) with otherwise stock Rom. You can find it at the top of the xposed section here on xda.
user68734 said:
Is there a version of Xposed that works with the Note 10.1 2014 edition running Samsung stock Lollipop v5.1.1?
Click to expand...
Click to collapse
I can confirm that the only the Spanish and USA stock ROMs work properly with Xposed, by installing Wanam's modified xposed app and installer. Meanwhile the latest ROM, the Singaporean ROM, does NOT work. Seems like they changed something somewhere that I haven't figured out yet.
Pact said:
I can confirm that the only the Spanish and USA stock ROMs work properly with Xposed, by installing Wanam's modified xposed app and installer. Meanwhile the latest ROM, the Singaporean ROM, does NOT work. Seems like they changed something somewhere that I haven't figured out yet.
Click to expand...
Click to collapse
Indian DOJ5 works fine
Wanam or Xposed?
Pact said:
I can confirm that the only the Spanish and USA stock ROMs work properly with Xposed, by installing Wanam's modified xposed app and installer.
Click to expand...
Click to collapse
I am a bit confused. Does Wanam's Xposed replace the default Xposed installer or is it just a module that is used by Xposed and has a lot of features that work on the Note 10.1? I have both installed on my Note 10.1 2014 edition but none of the features are working. The standard Xposed installer gives the following error ...
CANNOT LINK EXECUTABLE DEPENDENCIES library "libdvm.so" not found.
I saw this post in another thread about a file that needed to be installed but I have never heard anything about it and I am hesitant to flash it without learning more.

xposed now working on tab s3

A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.
Which are you using, and what would you like to use?
undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working
Can you change aspect ratio yet?
blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?
It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed
does not work for me.. i get a recovery-boot loop and it does not start the system
Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.
hmm.. but i need magisk :-/
Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd
I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?
xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..
Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam

Greenify For 8/9[Magisk Module]

Hei whatsup folks....So Trying Custom Roms..Right...Most Of The Time You May Came across Problem in Installing "Greenify4Magisk" In Magisk as it Only Support Until SDK 27.So...i too faced same problem when trying to install Greenify as System app...and To Be frank This Zip Is Just Edited Version...all Credits Goes to Original Devs Who craeted It.So By Using This Zip You Will Be Able To Use
Greenify In Pie roms and Also as a system app...Just Import In Magisk Modules and reboot...It should work Without Any Problem....Whatever for me everything seems fine....This Version Contains Latest APK of Greenify...!!
So Enjoy Happy Greenifying....!!!!!
This Is Strictly Magisk Module ...Never Try To Install It Through Recoveries...!
Download Link: https://drive.google.com/file/d/1oqSGwDQGO3GMLeMRvIMGAftK4_bhqIIl/view?usp=drivesdk
Sachinkerala said:
Hei whatsup folks....So Trying Custom Roms..Right...Most Of The Time You May Came across Problem in Installing "Greenify4Magisk" In Magisk as it Only Support Until SDK 27.So...i too faced same problem when trying to install Greenify as System app...and To Be frank This Zip Is Just Edited Version...all Credits Goes to Original Devs Who craeted It.So By Using This Zip You Will Be Able To Use
Greenify In Pie roms and Also as a system app...Just Import In Magisk Modules and reboot...It should work Without Any Problem....Whatever for me everything seems fine....This Version Contains Latest APK of Greenify...!!
So Enjoy Happy Greenifying....!!!!!
This Is Strictly Magisk Module ...Never Try To Install It Through Recoveries...!
Download Link: https://drive.google.com/file/d/1oqSGwDQGO3GMLeMRvIMGAftK4_bhqIIl/view?usp=drivesdk
Click to expand...
Click to collapse
Awesome! Thanks for the work
Update Is Up....!!
Greenify Module is Updated With Latest Version 4.7 Pro......!!!
https://drive.google.com/file/d/1--x319u5NoUHBQyCXrZQiTdK7yfYaKkW/view?usp=drivesdk
-Thanks
Sachinkerala said:
Update Is Up....!!
Greenify Module is Updated With Latest Version 4.7 Pro......!!!
https://drive.google.com/file/d/1--x319u5NoUHBQyCXrZQiTdK7yfYaKkW/view?usp=drivesdk
-Thanks
Click to expand...
Click to collapse
Thank you for your hard work!
Thanks for the app! It didn't worked, so I manually moved the app to System/priv-app through TWRP, mounted System and did that in File Manager, that worked.
Only problem I have is that after restart, all the Xposed/Donation features are getting unticked, really annoying.. I think I tried almost everything, but can't seem to make it work.
Anyone got a solution for this, please?
Got an S9 G960F running custom android 9 by Soldier9312 with TGP kernel selinux permissive.
Thanks in advance!

Categories

Resources