Hello forum Seniors
I have a problem with my a100 device, I searched for days a solution, but had no success.
I bought this device with original HC and updated with ACER_AV041_A100_0.002.00_ww_GEN1 ICS rom, to this point everything working.
everything worked, boot recovery/gps/games/ics/ everything
And I used it for a long time. Then I reseted the device.
And the problem began.
the device does not turn over.
I can START fastboot, but it dont sync with pc (I got drivers instaled)
I can START recovery, but dont install nothing ( I think my recovery is damaged)
I hope that there is a solution. But have not found any yet.
my recovery does not install or mount sdcard and external sd
when I enter, I see a red triangle with a dead android
I PRESS HOME key and recovery list this
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
----end----
I can navigate with VOL keys but i CAN'T select any option
Device not unlocked in fastboot (unluck mode) dont listed
I have the number of ADB connect, is this a CPUID to use in EUU_SBK????
There is a guide to using the EUU_SBK??? link please?????
This is my last hope.
sorry my bad inglish im a brazilian noob
thank all
E:/dev/block/mmcblk1 does not exist
That's recovery. Its saying recovery doesn't exist. If you can wait for a bit I'm working on fixing this but its going slow as some people aren't as clear about whats happening as you are, I was chasing a fix that didn't even need fixing, thank you. Its either something different and new, or its something thats been happening this whole time, but no one mentioned the error output aside from the update.zip failure.
I'll begin work on this new issue, and hopefully it can be fixed with the rest. The other devices seem to have recovery, however it seems it only works in CWM or TWRP, you seem to have stock recovery. I would suggest maybe trying to install CWM from HERE. Follow the instructions exactly and see if you can flash the CWM recovery and get into that. Please report back if this works or not, and what happens when you try.
Hi pio_masaki
Device not BOOTup, freeze in acer logo and I never root this device only apply official update
fastboot can't sync with pc for install a recovery and fastboot is locked
Fastboot display
"Bootloader v0.03.06-ICS: Starting Fastboot USB download protocol"
but fastboot no running any commands
fastboot erase
fastboot flash recovery.img
I try now a new SDcard formated with FAT32 clean, root directory with update.zip, renamed Acer_AV041_A100_1.014.00_WW_GEN1 to update.zip
boot in recovery
------------------------------------------
Erasing cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
----end-----------------------------------
now display dead android with RED TRIANGLE (!), press HOME key
-------------------------------------------
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
------------end-------------------------
note now display E:/dev/block/mmcblk1 does exist<<<<<<<<<<<<<
but I can't select any option in recovery only VOLUME keys work and HOME hide text
I can make Hard Reset with keys
(VOL-)+Power on vibrate swift lockscreen
display
-------------------------------
Erasing cache...
Erasing data...
--------end--------------------
restard and freeze in acer logo.
thank you and sorry my inglish
Your english is fine, don't worry
Ok, so previously mmcblk0p1 was NOT found, now it IS found? Well thats better then nothing. I've seen this on another device, though it was cache that was mounting and not mounting at almost random times.
I've been tracking this as far as I can, and it appears the A100 shares an issue with the A500 (and maybe A200?) that results in a bad sector(s) and must be partitioned around. If this is the actual cause, its a hardware failure, not software, and isn't anything you did, it just died.
This explains the string of bricks that seem to occur out of nowhere.
My original method was to DD a working image to the device, completely restoring the partition with a clone of my working system, cache, recovery, etc. However if its a damaged EMMC, this will not work either. This also explains why past attempts have failed on other devices that I've tried helping with off the forum.
As I can emulate a "bricked" device, I don't have a device with this actual issue to diagnose and attempt to fix, my device doesn't have this problem. I'm not real sure I can proceed much farther until either my device does this bad sector thing, or I get my hands on a device that is already bricked and begin finding the method to repair it.
Ok..now dealing with what DOES work...
==========================================================
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
=========================================================
have you tried selecting any of these options? Highlight with volume, and hit power to select, try from
apply update from external storage and record what it says (hopefully it just installs and your're good to go)
then
apply update from cache and again record what it says, hopefully it works fine.
then
wipe data/factory reset and again record what it says
then
wipe cache partition and record what it says
Do these in the order I mentioned, only doing the next if it fails. If it does install, don't do the rest, just report back success and what you did, in the order you did it, to get it going again.
Edit: Oh and reboot after each selection if it fails, and reboot into that menu again.
This is the problem, can't select any option
I select a option with VOLUME key, put cursor on apply updade from external storage so i hit power
And nothing happens.
If i hold power, device force power off...
Power key work perfect, only in recovery dont work...
Thank you
My friend have the same device with the same update 0.002.0_WW_GEN1, his device work normaly, when i go into recovery, I cant select any option too
I think if i reset his device, this cant boot to...i dont try it
I can upload video in youtube for you, if it help u see my case.
Ok, if power doesn't work on either device, try the home button. It's been so long since I ran stock recovery I may have gotten the buttons mixed up with CWM recovery, which uses Power as Enter. And good call on not doing anything on the other device, you never know. It shouldn't cause issues, but just in case, don't. We don't know exactly what is causing this, and if its anything like the hardbrick bug in some Samsung devices, anything can trigger it if it happens in the right order or time.
pio_masaki
Recovery does not select options when press power /home/reset/volumes
I need a guide for use EUUs_SBK rom, I have my CPUID
And in my friend's device, how i back to original hc?
Recovery have the same problem does not intall update.zip, if I install the CWM, Can I do official update to back original state? I really need back to factory rom and recovery.
Thank you for help
If the device is having issues, I wouldn't suggest going back to HC, it can only cause more problems. If you run the official update.zip it returns back to how it came from Acer, stock recovery, locked bootloader and unrooted stock ICS.
The EUU and SBK stuff has been attempted before and failed. Its in various threads with the same bricking issues, and doesn't seem to help, or work. At this point I think NVFLash is about the only option we have left to try to bring these back from a bricked state. Sadly Acer decided to try to lock out NVFLash, so it'll take some time to see if it will work with our A100s. Vache has the NVFlash config files, so its a start, it may work it may not, however I can't test much as my device doesn't have this bricking issue, so any testing on my a100 doesn't really mean anything.
I've actually looked around locally for a bricked a100 to see if I can get and begin working on a method to repair it, but either there are none locally bricked, or none are up for sale (sent back to Acer for repair).
I'm working on it, but I have a couple roadblocks preventing me from really trying, time, and no bricked device.
Ok doing some more digging around, I've come across a thread with some posts that seem to lead me to believe that (non stock) our bootloaders don't respond to the correct SBK, mine doesn't either, and I think it's because our method for unlocking the bootloader uses the A200 bootloader, which will NOT accept the SBK, even if correct, because its wrong for that bootloader.
This leaves out NVFlash, it can't authenticate with the bootloader so it gets blocked, so while it would fix the bricks (outside of hardware failure) it's not an option for us until we find out the correct SBK for our bootloaders.
For those on stock, the update.zip failures seem to be common, however I have a few things for you to try (I think you're stock ICS right?)
download this update.zip
Its ICS 014, should work.
It seems people had issues with it working because it originally came encrypted, and had to be decrypted to work. If it wasn't, you got update.zip not found or various other errors like you did. Thanks to azmode for this.
Take your external SD card, insert it into your PC however you can, and format it FAT32. Before doing this, copy any and all files you wish to keep safe to the PC as this will erase the card completely. If your card reader has a light, wait for it to stop flashing before moving on.
Take the update.zip file you downloaded and place it on the card. Nothing else, no folders or pics or music or anything else. Again wait for the activity light to stop for a few seconds BEFORE hitting eject. Also verify the file is named update.zip nothing else, and not update.zip.zip which can sometimes happen. All lowercase letters.
Once that is done make sure the tablet is OFF, completely, not sleeping but off. Leave it off for at least 30 seconds (or if its been off the whole time don't worry about it) then insert the SD card. Hold Volume Down (closest to lock switch) then press and hold Power and hold for about 3 seconds until the text FIRST comes up, immediately release the buttons as soon as you see any text coming up.
This should once again attempt to read update.zip from the external sd card, and hopefully finds it, or gives a different error then before.
These instructions aren't much different from before, as various other users have outlined this procedure before, in particular blackshinobi who has spent alot of time on the bricked threads.
That update.zip should be decrypted which should allow it to pass the bootloader checks. I think this is where some of the issue is coming from, its that stupid bootloader encryption blocking even valid attempts to restore the tablet to working condition or updating.
If anyone is willing, could they pull their 100% official stock bootloader and stick it somewhere to play around with? Or, I suppose, someone with a 100% official stock ICS system try NVFlash on their system and see if it allows or gives permission denied? If the 100% official still denies, then our SBK generation is wrong, if it does, then its our bootloaders, and we can attempt to fastboot flash the correct bootloader to pass SBK for EUU.
Have you a alternative link? For update.zip
Error 509
Im upload video now, I'm using update.zip from this link http://forum.xda-developers.com/showthread.php?t=1611696
ACER_AV041_A100_0.002.00_ww_GEN1 is the rom instaled and freeze from here http://vache-android.com/v1/index.php?site=files&file=139
--I think if you install it, you will have the same problems.
and i try this link too http://vache-android.com/v1/download.php?fileID=109 and http://vache-android.com/v1/download.php?fileID=116
-------------------Edit----------------
This is a video for try update with recovery in a100
same problem with 2 devices, but my a100 freeze in normal boot
http://youtu.be/CWFlA1W08wE
Im using a formatted microSD with only update.zip file
I tried all the links above.
thank you for help
Did you ever have any luck getting your tablet running again?
It looks like I am having the same issue as you are. with a couple of minor variations. I've tried all the recommendations in this thread and the ones linked from here but I'm not making any progress. I fear there is nothing I can do and that the device is now a fancy brick does anyone have any other ideas on getting this fixed?
1. When I boot to recovery, get to the dead Android I see the following messages in yellow
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
2. When I try to unlock the bootloader in fastboot mode (fastboot oem unlock) the screen blinks off and back on and I never get the lock.
wperry1 said:
Did you ever have any luck getting your tablet running again?
It looks like I am having the same issue as you are. with a couple of minor variations. I've tried all the recommendations in this thread and the ones linked from here but I'm not making any progress. I fear there is nothing I can do and that the device is now a fancy brick does anyone have any other ideas on getting this fixed?
1. When I boot to recovery, get to the dead Android I see the following messages in yellow
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
2. When I try to unlock the bootloader in fastboot mode (fastboot oem unlock) the screen blinks off and back on and I never get the lock.
Click to expand...
Click to collapse
Those errors have been identified as a dead emmc, which is currently unrecoverable. And is happening on quite a few of iconia's. This thread was prior to the devs and users finding thee issue. See all the brick threads here.
Ajuda em portugîes
rollidark said:
Hello forum Seniors
I have a problem with my a100 device, I searched for days a solution, but had no success.
I bought this device with original HC and updated with ACER_AV041_A100_0.002.00_ww_GEN1 ICS rom, to this point everything working.
everything worked, boot recovery/gps/games/ics/ everything
And I used it for a long time. Then I reseted the device.
And the problem began.
the device does not turn over.
I can START fastboot, but it dont sync with pc (I got drivers instaled)
I can START recovery, but dont install nothing ( I think my recovery is damaged)
I hope that there is a solution. But have not found any yet.
my recovery does not install or mount sdcard and external sd
when I enter, I see a red triangle with a dead android
I PRESS HOME key and recovery list this
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
----end----
I can navigate with VOL keys but i CAN'T select any option
Device not unlocked in fastboot (unluck mode) dont listed
I have the number of ADB connect, is this a CPUID to use in EUU_SBK????
There is a guide to using the EUU_SBK??? link please?????
This is my last hope.
sorry my bad inglish im a brazilian noob
thank all
Click to expand...
Click to collapse
Ola Amigo parece que você resolveu esse problema, sou brasileiro como você. Estou com o mesmo problema, como voce resolveu isto?
help
Dear All i have the issue with my Skyvega A 800s that whenever i start my phone its open in recovery mode and when i check log it says " dev/block/mmcblk1p1"
Cant format unknown volume: /emmc
Actually before this everything i going smoothly i flashed the rom and the tried to update from sky station when its complete and phone restart the problem comes please help me out please.....
leitejr said:
Ola Amigo parece que você resolveu esse problema, sou brasileiro como você. Estou com o mesmo problema, como voce resolveu isto?
Click to expand...
Click to collapse
adnandani said:
Dear All i have the issue with my Skyvega A 800s that whenever i start my phone its open in recovery mode and when i check log it says " dev/block/mmcblk1p1"
Cant format unknown volume: /emmc
Actually before this everything i going smoothly i flashed the rom and the tried to update from sky station when its complete and phone restart the problem comes please help me out please.....
Click to expand...
Click to collapse
Well this isn't a forum for that device, and not being familiar with it I can only guess. mmcblk1p1 is usually external SD card, if one is inserted, remove it, if one is not, insert one. See what it does on each try. It may be internal SD card too, hard to say since I don't know that device, although a link to it's recovery.fstab would help there, or just /system/etc/vold.fstab.
Sorry,
I'm one concept
This possible installed replicant recovery?
Just for '' flash img'' option
I'm test replicant os for my gtab2 3110, i'm look this option, i'm just copie img for my device and selected '' flash image'' this installed os
( my problematic for my a100 is i'm manually wipe,problem i'm erase file system ( etc,block,bin etc...)) yes i'm stupid men
Sent from my GT-I9305 using XDA Premium HD app
winny57 said:
Sorry,
I'm one concept
This possible installed replicant recovery?
Just for '' flash img'' option
I'm test replicant os for my gtab2 3110, i'm look this option, i'm just copie img for my device and selected '' flash image'' this installed os
( my problematic for my a100 is i'm manually wipe,problem i'm erase file system ( etc,block,bin etc...)) yes i'm stupid men
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
AFAIK it hasn't been made for the a100, so other then that, I dunno.
Sent from my Galaxy Nexus using Tapatalk 2
Ok thanks
You not any solution for me?
Sent from my GT-I9305 using XDA Premium HD app
winny57 said:
Ok thanks
You not any solution for me?
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Besides making that recovery not really, though you can fastboot flash images also.
I'm test this
My device reboot fastboot, this working
I'm flash not working
Sent from my GT-I9305 using XDA Premium HD app
---------- Post added at 02:45 AM ---------- Previous post was at 02:43 AM ----------
I'm not at home but try to remember but as I flash with fastboot
Sent from my GT-I9305 using XDA Premium HD app
Back story: OTA update to 4.3 killed USB on this phone, so there is no USB access to it - at all. I don't have a Windows computer, so I never downloaded ODIN to root the phone. It is completely stock, other than the unlock code obtained from T-Mobile.
I just switched from T-Mobile to AT&T, and for some reason had no data connection on the phone, even with the correct APN settings. I decided to try a factory reset. I went through the system settings menu and found the "Reset to factory settings" menu item, selected it, acknowledged the warning, input my PIN and let it go to work.
A few minutes later, it had rebooted into recovery. Sicne it was there, I took the opportunity to use the boot-loader's reset function and wiped the cache while I was at it. That was a mistake.
Now, the phone won't boot past the pulsing Samsung logo. I can get back to the recovery, and it pops up these errors - first, the droid on his back with the red triangle over him flashes "No command", and then it dumps me to the recovery menu with this scrolled at the bottom of the screen:
Code:
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : TMB
Successfully applied multi-CSC
E:failed to mount /data (Invalid argument)
can't mount '/data' (Invalid argument)
E:failed to mount /data (Invalid argument)
E:Can't mount /data/log/recovery_log.txt
It's obviously soft bricked. I can't use ODIN to flash anything. But, since I'm at the recovery screen, it is giving me the option of loading an update from external storage - what should I put on the SD card to load in order to fix it? Can I fix it without ODIN?
edit to add:
I've already tried the stock UVUEMJC firmware from DocHoliday77's thread, but it threw a bunch of errors across the screen that I didn't catch in time and rebooted to the same point.
Try @saranhai's StockMod Rom. Put it on the External SD and flash it. If that fails, please post the error log.
On another note. can you try in Recovery and manually mount /Data Partition ?
Perseus71 said:
Try @saranhai's StockMod Rom. Put it on the External SD and flash it. If that fails, please post the error log.
On another note. can you try in Recovery and manually mount /Data Partition ?
Click to expand...
Click to collapse
Stuck @ work today, and I didn't bring it with me. I'll give that a shot when I get home tonight. I don't recall seeing a "mount" option in recovery - it's the stock Samsung recovery, I'm not sure I made that clear in the OP.
My Nexus 5 arrived last night, so this is becoming a project for me. I just want to know if I can make it work, but without USB access to it, that is probably a non-starter.
If you have Stock Rom, there isn't anything you could flash that way. At the most you could flash a Stock firmware via KIES.
Ok here is the story about a year ago I rooted my AT&T GS3 installing CWM and Cyanogenmod. I hadn't had an issue until mid-september. For some reason one of the updates caused certain phone functions to quit working, specifically my mobile data. I searched around on the internet and found out that it had probably affected my modem files, and was told to flash back to stock and that that should solve it. I found a stock firmware file and flashed it with odin. When my phone rebooted it boots to the point of the samsung emblem with the oscillating blue background and just sits there. I tried flashing different versions of the firmware to the same result. I later learned I probably flashed just the modem which I found while trying to solve the problem. When I boot into stock recovery i receive the following message:
E:failed to mount/data (Invalid argument)
can't mount '/data' (Invalid argument)
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : ATT
Successfully applied multi-CSC
E:failed to mount/data (Invalid argument)
can't mount '/data' (Invalid argument)
E:failed to mount/data (Invalid argument)
Anything will help because I am currently without a phone so.... thanks
Edit 1: The Firmware I attempted to flash came from samsung-updates.com though I am not sure of what build and can't check since it won't boot all the way
What firmware build are you on?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I cannot tell what build, I got it from samsung-updates.com in a zip titled ATT-I747UCDLK3-201211116120549
I would download it again in case it was somehow corrupted. The build is in the filename, LK3, which appears to be 4.1.1. I would say to try 4.1.2 instead, but it appears that wasn't released by AT&T either.
Or if you want you can try flashing the root66 firmware instead. It's LK3 too, only pre-rooted. It's in this thread: http://forum.xda-developers.com/showthread.php?t=1739426
Either way, redownload and try flashing again. Then boot recovery and factory reset. (Will wipe internal sd)
If it still won't mount /data, try flashing Twrp recovery and factory reset. (Will not wipe internal sd unless you choose advanced > Format /data.)
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thank you so much! I ended up having to flash twrp but when I did what you said it booted just fine. Now the only question remaining is do I try to go back to cyanogenmod?
Since you have TWRP working, copy CM11 to your phone, boot to twrp, and flash CM11. If CM11 does't boot, try wiping data, cache, and dalvik.
Just remember, anytime you go between different based roms, such as TW and CM, you have to factory reset or it'll hang during boot.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
hey
i was using 4.4.4 [TeamCanjica] CyanogenMod 11.0 for about one month... yesterday i saw my camera did not work so i restart my phone (using power button) after that i am stuck on logo....
i can enter Download mode and Recovery mode but in recovery i see something like:
E: can"t mount/ cache recovery/ command
E: can"t mount/ cache recovery/log
E: can"t open/ cache recovery/log
E: can"t mount/ cache recovery/last_log
E: can"t open cache recovery/last_log
E: can"t mount/ cache recovery/last_install
E: can"t open/ cache recovery/last_install
when i am trying factory reset it stuck at " ---wiping data... formatting /data" and nothing happens... i already was trying install stock room via odin but that did not help me
Which kernel?
Go in CWM to mounts and storage and format SYSTEM DATA CACHE and flash CM directly after this....
fluffi444 said:
Which kernel?
Go in CWM to mounts and storage and format SYSTEM DATA CACHE and flash CM directly after this....
Click to expand...
Click to collapse
i think it was D-kernel.... when i am trying to format i stuck at "formatting /system..." and nothing happens :/
As usual I recommend to begin from scratch by flashing 3-Parted GB FW....(with re-partition activated)
This is the "swiss knife" for all major problems regarding FW etc...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Note that you choose the correct GB(!) FW for your Phone.
Let your Phone boot completely after this...
After this JB again - and if you like CM
fluffi444 said:
As usual I recommend to begin from scratch by flashing 3-Parted GB FW....(with re-partition activated)
This is the "swiss knife" for all major problems regarding FW etc...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Note that you choose the correct GB(!) FW for your Phone.
Let your Phone boot completely after this...
After this JB again - and if you like CM
Click to expand...
Click to collapse
looks like my phone is dead... this did not help me either - i am still stuck at logo galaxy
Which variant of ace 2 do u have
teddytsen said:
Which variant of ace 2 do u have
Click to expand...
Click to collapse
GT-I8160
Hi everyone,
My S4 Mini GT-I9195 LTE 8GB (Stock 4.4.2) became a hard brick after trying to enter Safe Mode (booted while holding volume-down).
This problem I managed to fix by using a debrick.img on a SD Card, which made Download mode possible.
However, after flashing the Stock ROM (I9195XXUCOD3_I9195NEECOD1_NEE) using Odin without errors, the phone goes into a boot loop.
I can enter Recovery mode (Stock) and Download mode without any problems.
When I try to clear the cache, I get the following error:
"E:format_volume: make_extf4fs failed on /dev/block/platform/msm_sdcc.1/by-name/cache"
I can still access the cache partition by chosing "Apply update from cache", which makes me think it only got corrupted somehow (and not eMMC failure). When I browse the cache-partition from Recovery, I can see the "lost+found" and "recovery" folders.
My next step to try to fix my phone, is now to recreate the partitions using a PIT-file. I have been using PIT Magic v1.3.10 to check different files for the I9195, but so far all of them seem to be for the 16GB version of the Mini? Since I reflashed with a Stock ROM in Odin (debug mode disabled), I cannot access my phone using ADB (except for "Apply update from ADB").
Hope that someone here can point me in the right direction and hopefully have a PIT-file for the 8GB-version of the Samsung S4 Mini GT-I9195 LTE.
I also have another almost identical S4 Mini with broken recovery ("set warranty bit : recovery"), which I will use as a test subject
Best regards,
Walkir
Below is some information from my phone in Recovery mode:
Android system recovery <3e>
KOT49H.I9195XXUCOD3
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : NEE
Successfully applied multi-CSC.
-- Wiping cache...
Formatting /cache...
E:format_volume: make_extf4fs failed on /dev/
block/platform/msm_sdcc.1/by-name/cache
Cache wipe complete.
Walkir said:
Hi everyone,
My S4 Mini GT-I9195 LTE 8GB (Stock 4.4.2) became a hard brick after trying to enter Safe Mode (booted while holding volume-down).
This problem I managed to fix by using a debrick.img on a SD Card, which made Download mode possible.
However, after flashing the Stock ROM (I9195XXUCOD3_I9195NEECOD1_NEE) using Odin without errors, the phone goes into a boot loop.
I can enter Recovery mode (Stock) and Download mode without any problems.
When I try to clear the cache, I get the following error:
"E:format_volume: make_extf4fs failed on /dev/block/platform/msm_sdcc.1/by-name/cache"
I can still access the cache partition by chosing "Apply update from cache", which makes me think it only got corrupted somehow (and not eMMC failure). When I browse the cache-partition from Recovery, I can see the "lost+found" and "recovery" folders.
My next step to try to fix my phone, is now to recreate the partitions using a PIT-file. I have been using PIT Magic v1.3.10 to check different files for the I9195, but so far all of them seem to be for the 16GB version of the Mini? Since I reflashed with a Stock ROM in Odin (debug mode disabled), I cannot access my phone using ADB (except for "Apply update from ADB").
Hope that someone here can point me in the right direction and hopefully have a PIT-file for the 8GB-version of the Samsung S4 Mini GT-I9195 LTE.
I also have another almost identical S4 Mini with broken recovery ("set warranty bit : recovery"), which I will use as a test subject
Best regards,
Walkir
Below is some information from my phone in Recovery mode:
Android system recovery <3e>
KOT49H.I9195XXUCOD3
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : NEE
Successfully applied multi-CSC.
-- Wiping cache...
Formatting /cache...
E:format_volume: make_extf4fs failed on /dev/
block/platform/msm_sdcc.1/by-name/cache
Cache wipe complete.
Click to expand...
Click to collapse
Hi there.!!!
Im from Venezuela i some problem with my s4 mini I9195 LTE.. Any help?? Please??