Navigation keys when keyboard is enabled - T-Mobile LG G3

Is there a way to disable the soft keys when the keyboard is in use ? External desktop does not take.

stej16 said:
Is there a way to disable the soft keys when the keyboard is in use ? External desktop does not take.
Click to expand...
Click to collapse
Well if you flash a custom rom some have a navbar toggle for the notification pull down. You might be able to use tasker to set something up like that as in when the keyboard pops navbar hides then show back up after it's closed, but I'm not too sure as I haven't used it myself. Aside from manually toggling it I'd say that would be your best bet. I know for a fact that blisspop has the toggle.
Sent from my LG-D851

Related

[Q] What's the best setup for S-Pen on CM/AOSP ROM?

I'm running PAC-Man ROM and am thankful for the settings that allow me to use gestures (when the S Pen's button is held) but it's a huge pain to have to hold the button for these gestures. The button on the pen is too low on the pen for my liking when I'm trying to use it as a pointing device/extension of my hand.
A couple of ideas I have had:
-the input settings that I described earlier
-the Sidebar application. I would love it if I could access shortcuts through Sidebar that emulate the back and menu keys but unfortunately the only button that can be emulated is the home key!
-CM S Pen Add-on used in conjunction with Note Buddy. I like the idea here, but I'd like to know if there's a way to automatically activate the AOSP on-screen buttons when I detach the S-Pen, but Note Buddy doesn't seem to support any extensions.
Are there any other solutions you guys have come up with that allow me to use my Note in a practical way with ONLY the S-Pen? That means I don't want to have to take any fingers off of the pen or have to lift my other hand to press the menu and back buttons.
I use GMD SPen control & cant say enugh good things about it! It can do everything you are looking for (I think) I have it open lecture notes when I detach the pen, & simulate the home button when I attach it! But you can set up any user gestures you want!
Just bought the pro version...
Very nice application...
And it's running well on carbon 1.8..
Thank you....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
I'm not really willing to shell out $6 just yet... I'll have to do some more research!
I also found another method: use the ribbons feature built into PAC-Man ROM (not sure if it's an AOKP feature) in order to swipe out a tray from the right side of the screen that has the nav buttons in it. Still wish I could get the real navbar to display by default though!
Edit: Just remembered there's also PA Pie.
To add a navbar to ANY rom that doesnt have one..
open your buildprop (in /system)
scroll down to the bottom, and after the last line, add this line
qemu.hw.mainkeys=0
save the changes, reboot the phone, and BOOM, you have a navbar..works on AOSP and TW roms..
wase4711 said:
To add a navbar to ANY rom that doesnt have one..
open your buildprop (in /system)
scroll down to the bottom, and after the last line, add this line
qemu.hw.mainkeys=0
save the changes, reboot the phone, and BOOM, you have a navbar..works on AOSP and TW roms..
Click to expand...
Click to collapse
Getting a navbar to display is not the issue. What's difficult is trying to get the navbar to display only when the pen is detached! :/
rrroach said:
Getting a navbar to display is not the issue. What's difficult is trying to get the navbar to display only when the pen is detached! :/
Click to expand...
Click to collapse
I have a tasker task to launch with the help of secure settings to hide the navigation bar when spen is attached and to show it when I de-attach the spen. Just take advantage of the expandable desktop function (and select it to only hide the nav bar when pen is inserted).
Works like a charm.
pemell said:
I have a tasker task to launch with the help of secure settings to hide the navigation bar when spen is attached and to show it when I de-attach the spen. Just take advantage of the expandable desktop function (and select it to only hide the nav bar when pen is inserted).
Works like a charm.
Click to expand...
Click to collapse
Are you referring to the "Expand desktop" option under Custom ROM Actions? That option has a red circle next to it for me, meaning that it is not supported by my ROM. :'(
Which rom are you on? Is it featured in your rom?
If so, you need to turn on expanded desktop and reboot. You might also need to make secure settings a device administrator.
For me, on SlimBean, it's a red circle at first too, but it turns green when following my steps above.
Try it out and report your progress.
Skickat från min GT-N7105 med Tapatalk
pemell said:
Which rom are you on? Is it featured in your rom?
If so, you need to turn on expanded desktop and reboot. You might also need to make secure settings a device administrator.
For me, on SlimBean, it's a red circle at first too, but it turns green when following my steps above.
Try it out and report your progress.
Skickat från min GT-N7105 med Tapatalk
Click to expand...
Click to collapse
The reboot worked! Can't believe I hadn't thought of that. xP

[Q] How to remove Front Touch Buttons?

Hello friends!
I got my LG G Pad Yesterday
Is there a way to remove the Front Touch Buttons? I couldn't see any options in Settings! Is it possible after rooting?
I plan to use only gestures for the front key button functions... May be we can use the screen real estate more effectively if we get rid of the buttons?
Any thoughts / suggestions?
I just installed an app called GMD Auto Hide from the Play Store. It provides an auto-hide feature for the touch buttons. It seems to work well, except that it overrides the setting on the phone that lets you change the button order. I want to set up the soft touch buttons so that the "back" key is on the right to match my Samsung phone. It appears that the GMD app doesn't have a setting for that. Too bad.
Does anybody know a way to get auto-hide and also customize the button positions?
woody1 said:
I just installed an app called GMD Auto Hide from the Play Store. It provides an auto-hide feature for the touch buttons. It seems to work well, except that it overrides the setting on the phone that lets you change the button order. I want to set up the soft touch buttons so that the "back" key is on the right to match my Samsung phone. It appears that the GMD app doesn't have a setting for that. Too bad.
Does anybody know a way to get auto-hide and also customize the button positions?
Click to expand...
Click to collapse
Thanks for the quick reply.
With GMD auto hide, does the display get extended to the button area or the area just becomes blank?
I am thinking of using GMD gesture launcher to to replace the buttons...
abdulm said:
Thanks for the quick reply.
With GMD auto hide, does the display get extended to the button area or the area just becomes blank?
I am thinking of using GMD gesture launcher to to replace the buttons...
Click to expand...
Click to collapse
It gets extended. I haven't used it very much yet, but it looks like it does the job, if you don't mind the button order.
Ok, I played with the app some more. When it replaces the soft touch keys, it puts a red line at the bottom. I did get it to put the back button on the right side, but another issue is that it puts a "recent apps" button where the menu button usually goes, then it puts a different menu button on the right edge. I wish it would l wish it had more options to set it up the way I want to.
Ultimate Dynamic Navbar THE BEST)))
Alexey71 said:
Ultimate Dynamic Navbar THE BEST)))
Click to expand...
Click to collapse
I tried it, but it didn't work for me. The normal soft touch keys were not hidden.
GMD Gesture is fantastic. It hide autobar (your tab need to be rooted) and replace virtual button by gesture that you can define by yourself. Moreover, the developper is very reactive..
Kholargol said:
GMD Gesture is fantastic. It hide autobar (your tab need to be rooted) and replace virtual button by gesture that you can define by yourself. Moreover, the developper is very reactive..
Click to expand...
Click to collapse
Thanks. GMD does the job quite well. I overlooked the status bar on/off part in GMD?
Sent from my LG-V500 using XDA Premium 4 mobile app

[Q] Changing the Navbar Position

So something that's always bugged me about how Android currently handles the navbar, on a phone, if you go into landscape mode, the navbar stays in the same position as in portrait mode. This makes sense, as you'll be holding it from the sides.
Is there a way to make a tablet do this, via kernal mod or something better? Having the navbar on the bottom, especially on a Nexus 7, doesn't make sense for a 7" tablet.
Help would be appreciated
Search for GMD Auto Hide Soft Keys in play store.
huyem83 said:
Search for GMD Auto Hide Soft Keys in play store.
Click to expand...
Click to collapse
This app won't work. Plus I find it a bit of a messy solution if it were to. I don't want to hide the navbar, I simply want to move it to the right, or left, side of the screen.
Ultimate Dynamic Navbar and GMD do have the option to move the navbar to the right when in landscape mode but it also disappear .

Coming from Nexus 5, have some questions on OP3

I use Gravitybox on my Nexus so I'd like to do the same on the OP3.
It looks like the OP3 has physical nav buttons, which is to say, I can't add to that with anything.
Is there an IME switcher that shows up anywhere when typing for easily switching between keyboards? What about adding arrows for cursor navigation. I use Swiftkey for my keyboard, so unless I enable the keyboard row, there's no way to move the cursor with it. On the Nexus, I used the function in Gravity box to add cursor keys to the nav bar, but OP3 having physical buttons seems like it would put a stop to that too.
If I keep it stock and used systemless root/xposed/etc via Magisk, would it pass safetynet checks as it does on the Nexus when I turn them off?
Are there any other caveats I'd need to look out for?
(And in the interest of fairness, what would likely be the best improvements I notice too?)
You can enable navigation bar on the oneplus 3, even if there is physicals buttons.
The IME switcher will show up in the navbar if you enable it, or in the notification if you don't.
I don't know about root and safetynet
olimar7184 said:
You can enable navigation bar on the oneplus 3, even if there is physicals buttons.
The IME switcher will show up in the navbar if you enable it, or in the notification if you don't.
Click to expand...
Click to collapse
Enable by way of default options or if I'm using Gravitybox specifically?
Trel said:
Enable by way of default options or if I'm using Gravitybox specifically?
Click to expand...
Click to collapse
There is an option on the settings of the stock rom:good:
Welp, the physical size is bigger than I was hoping, but I can't find a better option on all the other specs.
This is most likely the only viable phone then and will be what I end up getting.
We shall see.
If needed you can use LMT to display the "pie" and customize actions.
http://forum.xda-developers.com/showthread.php?t=1330150
Dushaine said:
If needed you can use LMT to display the "pie" and customize actions.
http://forum.xda-developers.com/showthread.php?t=1330150
Click to expand...
Click to collapse
That looks like it may do what I want.
I'm not quite familiar with it, can you make it so if I call it up, it persists until I dismiss it?
Thinking along the lines of bringing up a menu with "[<] [Dismiss] [>]" to let me do multiple arrow presses.
If that's doable, then that would fully take care of what I'm looking for.

Hide navigation bar on rooted stock 7.0

Someone got to permanent hide the softkeys on nougat? I've already tried putting "qemu.hw.mainkeys=1" at the end of build.prop as I always did in my other phones, but that don't seen to work. I've tried too using a lot of overlays to set the softkeys height to 0, but with no sucess also. Besides that, I've tried to decompile de framework-res.apk and modify the navbar height value to 0, what gives me no navigation bar but no status bar too.
Any another way that will work? Am I missing something? I really want to use lmt and hide those screen space eaters
Just use https://forum.xda-developers.com/android/apps-games/app-custom-navigation-bar-customize-t3590967, there is an option to hide the navigation bar
Chiinau said:
Just use https://forum.xda-developers.com/android/apps-games/app-custom-navigation-bar-customize-t3590967, there is an option to hide the navigation bar
Click to expand...
Click to collapse
Unfortunately a swipe up will bring the buttons, and I want to really disable it in order to use lmt on the bottom of the screen
Camarda said:
Someone got to permanent hide the softkeys on nougat? I've already tried putting "qemu.hw.mainkeys=1" at the end of build.prop as I always did in my other phones, but that don't seen to work. I've tried too using a lot of overlays to set the softkeys height to 0, but with no sucess also. Besides that, I've tried to decompile de framework-res.apk and modify the navbar height value to 0, what gives me no navigation bar but no status bar too.
Any another way that will work? Am I missing something? I really want to use lmt and hide those screen space eaters
Click to expand...
Click to collapse
You ever figure this out..this has got to be the most annoying thing about this phone.
I use Assistive touch app https://play.google.com/store/apps/details?id=com.luutinhit.assistivetouch and have a floating button which helps me to navigate. One tap for back, double tap to home and hold for recent. It's quite useful and convenient. It's always there at the thumb position and easy to reach. I use Nougat/Oreo Quick Settings app https://play.google.com/store/apps/details?id=it.simonesestito.ntiles and created a custom tile for immersive mode to hide navbars only, yes if you swipe from bottom you'll find the navbar there but i don't need to cuz I use the floating button all the time. That build prop command works for me, I've tried that earlier but i choose the immersive mode because if Assistive touch crases (which never happened till now) I can use the navbar as backup. The command you're using is right, I don't know what's the issue but you can reset your device and then try if it works.

Categories

Resources