[ROM][DEV] GNU/Linux Sailfish OS 1.1.7 Björnträsket - Xiaomi Redmi 1S

Deprecated.
Please visit http://tradiz.org/?sfos-armani for further work on sailfish

Thank you for the project!!I think I'll test when it'll get easier or I'll know all the necessary things,it's a little bit sad for because I'd like to help you!Good luck at anyway!

keep going man , really looking for Sailfish OS

manuhackzzz said:
keep going man , really looking for Sailfish OS
Click to expand...
Click to collapse
.d
---------- Post added at 10:13 AM ---------- Previous post was at 10:11 AM ----------
I will wait for fixing these issues , can.we do a.dual boot with cm12.1 ?

Updated to 1.1.7, and made installation simple

Thanks man
Awesome work @CoreWolf

man stuck at mi logo

getting excited to see RIL partially working, still waiting for it to be usable, cheers for developer

satti8893 said:
man stuck at mi logo
Click to expand...
Click to collapse
it's booting perfectly on me..
everything is great, but as OP said RIL is partially working and it didn't work on me..
I believe that can be solved..
hats off to dev..

Thanks for the awsm os @CoreWolf. Keep up the good work. waiting for perfect stable build:good::good::good:

Great stuff..i am looking forward to try this. just confused. Do i have to flast it directly upon cm11 or i have to first wipe data and system ??

Great Work ...
Hats off to you @CoreWolf
excited to test.... But I need RIL as my redmi 1s is my primary Device. will wait for RIL to be fixed

raj3534 said:
Great stuff..i am looking forward to try this. just confused. Do i have to flast it directly upon cm11 or i have to first wipe data and system ??
Click to expand...
Click to collapse
Directly upon.

Stuck at logo. please help
satti8893 said:
man stuck at mi logo
Click to expand...
Click to collapse
Hi I'm having the save issue stuck at "MI" logo.
did you get a solution to work ? if any please help me.
i'm using http://forum.xda-developers.com/showthread.php?t=2909757 this CM11 rom.
i'm desperately waiting for sailfish os for redmi 1s

No bug?

pankajkumar90 said:
Hi I'm having the save issue stuck at "MI" logo.
did you get a solution to work ? if any please help me.
i'm using http://forum.xda-developers.com/showthread.php?t=2909757 this CM11 rom.
i'm desperately waiting for sailfish os for redmi 1s
Click to expand...
Click to collapse
no im waiting for an update.
i went back to cm12.1 temasek rom
---------- Post added at 10:08 AM ---------- Previous post was at 10:05 AM ----------
travarilo said:
it's booting perfectly on me..
everything is great, but as OP said RIL is partially working and it didn't work on me..
I believe that can be solved..
hats off to dev..
Click to expand...
Click to collapse
i did everything properly, followed every step as mentioned in OP.
could u jst tell me how did u do exactly, i mean i would like to know ur procedure.

satti8893 said:
no im waiting for an update.
i went back to cm12.1 temasek rom
---------- Post added at 10:08 AM ---------- Previous post was at 10:05 AM ----------
i did everything properly, followed every step as mentioned in OP.
could u jst tell me how did u do exactly, i mean i would like to know ur procedure.
Click to expand...
Click to collapse
yeah I just followed the instructions..
wipe cache-dalvik cache-system-data
flash CM11 ROM, I forget which version is but I think CM11-R24
without wipe anything, flash sailfish-os directly, it takes a while longer than usual
reboot system
that's it

nice and smooth but not a daily driver
well it is very smooth and fluid
gestures are working well
there are many things that are not working like-
camera,
media files are not getting detected,
some of menus in settings are not getting shown like bluetooth and wifi,
RIL (no bars)
Double Tap to wake is not present ,have to press the power key
---------- Post added at 01:48 PM ---------- Previous post was at 01:42 PM ----------
do not get confused when flashing
go to recovery mode
wipe data, system, cache
first flash the cm11 file
and then directly (without wiping anything)
flash the sailfish-os file
it will take time so don't panic
it will take 10-15 minutes or may be more to complete
then boot up the device

Can any please tell me the prerequisites to install SFOS.
nit_in said:
well it is very smooth and fluid
gestures are working well
there are many things that are not working like-
camera,
media files are not getting detected,
some of menus in settings are not getting shown like bluetooth and wifi,
RIL (no bars)
Double Tap to wake is not present ,have to press the power key
---------- Post added at 01:48 PM ---------- Previous post was at 01:42 PM ----------
do not get confused when flashing
go to recovery mode
wipe data, system, cache
first flash the cm11 file
and then directly (without wiping anything)
flash the sailfish-os file
it will take time so don't panic
it will take 10-15 minutes or may be more to complete
then boot up the device
Click to expand...
Click to collapse
Hi
I have followed as u stated but still stuck at logo waited for 30mins still no change and it is showing a white color led notification
This is my configuration :
Kernel : Xceedxcelerate
TWRP : 2.8.7.0
Cm11 R29 : http://forum.xda-developers.com/showthread.php?t=2909757
Sailfish os : as per the OP.
Can you please tell me what stuff are you using to flash ...
Thank you

pankajkumar90 said:
Hi
I have followed as u stated but still stuck at logo waited for 30mins still no change and it is showing a white color led notification
This is my configuration :
Kernel : Xceedxcelerate
TWRP : 2.8.7.0
Cm11 R29 : http://forum.xda-developers.com/showthread.php?t=2909757
Sailfish os : as per the OP.
Can you please tell me what stuff are you using to flash ...
Thank you
Click to expand...
Click to collapse
Don't install any custom kernel. Just flash cm11 then sailfish.

Related

(ROM)MIUI V6 for i9500

Just DOWNLOD and flash it.
I am not responsible for any brick of ur device. I just shair it.For modaretor the link is not from any forum.but link is from cloud.
Kitkat ? lollipop ?
Deleted
sankhauaa said:
Just DOWNLODhttp://shmain.fcloud.store.qq.com/store_raw_download?buid=17021&uuid=38110&key=A667F322545B9893252F581DA4CBDB693B669014AAD57CAA500A20C5523B7C19&fsname=%E4%B8%89%E6%98%9F+Galaxy+S4+I9500+%E8%B6%85%E6%B5%81%E7%95%85+%E7%B2%BE%E4%BB%BFv6%E4%BD%93%E9%AA%8C%E7%89%88+%E5%8A%A0%E5%85%A5v6%E7%89%B9%E6%95%88+%E5%8D%8E%E4%B8%BD%E9%AB%98%E7%AB%AF.zip and flash it.
I am not responsible for any brick of ur device. I just shair it.For modaretor the link is not from any forum.but link is from cloud.
Click to expand...
Click to collapse
Come on dude,, Where is the rom description?
---------- Post added at 05:47 PM ---------- Previous post was at 05:28 PM ----------
shiruuu.samad, have you test it, Couse your saying its a good one
zasasule said:
Come on dude,, Where is the rom description?
---------- Post added at 05:47 PM ---------- Previous post was at 05:28 PM ----------
shiruuu.samad, have you test it, Couse your saying its a good one
Click to expand...
Click to collapse
Its 4.4.2 and primary language is chinse.u have to change it to english.
zasasule said:
Come on dude,, Where is the rom description?
---------- Post added at 05:47 PM ---------- Previous post was at 05:28 PM ----------
shiruuu.samad, have you test it, Couse your saying its a good one
Click to expand...
Click to collapse
yes ! Where is the rom description?
and From where? please
thank you
---------- Post added at 05:04 PM ---------- Previous post was at 04:54 PM ----------
Are you tried it or do you read the experience of anyone else?
i love the miui rom
thank you
language
is this multilanguage?
im sorry whats this
Sent from my GT-I9500
failed
i cant install with philz
viko35 said:
i cant install with philz
Click to expand...
Click to collapse
i think to flash this you need to extract the recovery.img file, flash it through recovery and then flash the rom...backup first
i flashed the rom through cwm, still waiting for the rom to boot...i will update...
hajyihia said:
i flashed the rom through cwm, still waiting for the rom to boot...i will update...
Click to expand...
Click to collapse
Pls do.
the rom doesnt boot, it stays on samsung logo...i tried flashing it over a lollipop rom and over a kitkat rom....the same result....dont waste your time
hajyihia said:
the rom doesnt boot, it stays on samsung logo...i tried flashing it over a lollipop rom and over a kitkat rom....the same result....dont waste your time
Click to expand...
Click to collapse
At least you don't broke your phone. Thank you for beeing the first to try.
Edit: did you wipe cache and dalvik after flashing?
pepebiondi said:
At least you don't broke your phone. Thank you for beeing the first to try.
Click to expand...
Click to collapse
no problem bro...yeah i was afraid of bricking my phone...so i made a backup in case..
Not MIUI 6, is MIUI v5 themed like 6, I've seen a lot of those roms...
Innocents day in Argentina is on december....
sankhauaa said:
Just DOWNLODhttp://shmain.fcloud.store.qq.com/store_raw_download?buid=17021&uuid=38110&key=A667F322545B9893252F581DA4CBDB693B669014AAD57CAA500A20C5523B7C19&fsname=%E4%B8%89%E6%98%9F+Galaxy+S4+I9500+%E8%B6%85%E6%B5%81%E7%95%85+%E7%B2%BE%E4%BB%BFv6%E4%BD%93%E9%AA%8C%E7%89%88+%E5%8A%A0%E5%85%A5v6%E7%89%B9%E6%95%88+%E5%8D%8E%E4%B8%BD%E9%AB%98%E7%AB%AF.zip and flash it.
I am not responsible for any brick of ur device. I just shair it.For modaretor the link is not from any forum.but link is from cloud.
Click to expand...
Click to collapse
shiruuu.samad said:
Wow good one man
Click to expand...
Click to collapse
elias_gabriel said:
Not MIUI 6, is MIUI v5 themed like 6, I've seen a lot of those roms...
Click to expand...
Click to collapse
your right elias,, its too fast for the rom to be released. I coould not believe it, the time i saw the MIU V6 post, I think the title of the thread need to be changed, Its making people believe its miu v6, while it is not...
tutorial about How to Install miui on S4
for those who are getting error while installing... u can try this method of installing miui... it works guranteed ?
link: https://m.youtube.com/watch?v=Fkirb0xKFV4
Dear OP, please have some knowledge while posting any thread to Developer region. You may be the reason for bricking many devices. If you have tested this ROM, at least share the status or procedure to flash the rom instead of sharing a whole thread in a single Link.
BTW, we already have i9500 MIUI V5 thread but it is still in progressive way. Do check and Hope u understand.:good:

[ROM] Bliss ROM [I9500] [V 6.4] [23/09/2016]

*This ROM has not been developed by me. Please thank/donate the original developer for his work (link below)
Bliss ROM V6.4
Dated : 23/09/2016
Base : CM-MM
BUGS :-
Test and report
DOWNLOADS
Original thread link :-
http://m.romzj.com/rom/57720.htm
Mirror link :-
https://mega.nz/#!RoUz2Zwb!gAJe9zItpfHbvynz5zhF4IaAvRbSyiPofkZ_5TebUoA
Lastly, press THANKS if I've helped
Also, I hope that the thread is in the right section.
Great that you have started a thread sid. Nice to see that you'll manage bliss roms on xda.
Best of luck!
Hi screen shot pls
here are the some screenshots...
P.S: http://m.romzj.com/rom/57720.htm
multilanguage ?
Thanks mate!
Thanks for the rom!
multilanguage ? every thinb is working ????
so many bugs in this rom, hoping it will be fixed in the next update?
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
raouf1996 said:
multilanguage ? every thinb is working ????
Click to expand...
Click to collapse
Yes it is multi language,but some inbuilt apps are chinese..and settings isnt working properly
PrudhviRaj01 said:
so many bugs in this rom, hoping it will be fixed in the next update?
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
Yes it is multi language,but some inbuilt apps are chinese..and settings isnt working properly
Click to expand...
Click to collapse
What are the bugs bro?
Please state them so I can add in OP.
PS : I didn't face any settings bug.
talayy said:
Great that you have started a thread sid. Nice to see that you'll manage bliss roms on xda.
Best of luck!
Click to expand...
Click to collapse
Thanks talay. You are always very helping.
Arpit Aggarwal said:
here are the some screenshots...
P.S: http://m.romzj.com/rom/57720.htm
Click to expand...
Click to collapse
Thanks. I'll add them in OP.
Sid:
Guys.. in this ROM voip works :-
1. When someone calls you - it works 100%
2. When you call someone - it works 50% of the time
PS : Tested on Whatsapp
invincible authority said:
What are the bugs bro?
Please state them so I can add in OP.
PS : I didn't face any settings bug.
Click to expand...
Click to collapse
When i tried to open setting,the phone hanged and a fc notification appeared.
i used micro gapps.
other than that this ROM is awesome
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
invincible authority said:
Sid:
Guys.. in this ROM voip works :-
1. When someone calls you - it works 100%
2. When you call someone - it works 50% of the time
PS : Tested on Whatsapp
Click to expand...
Click to collapse
and the camera?
PrudhviRaj01 said:
When i tried to open setting,the phone hanged and a fc notification appeared.
i used micro gapps.
other than that this ROM is awesome
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
and the camera?
Click to expand...
Click to collapse
Settings fc :-
I also faced various fcs. What I did was that I booted the ROM - changed some settings - flashed gapps - booted again - and then I faced a lot of fcs.
Try this --- reboot recovery - and then do a factory reset - hopefully u won't get any fcs (worked for me)
Camera issue :-
I didn't get any camera fcs so far. Although I must admit that don't use camera so much.
Is this rom based on gearcm?
Looking well. Im using gearcm now. do you recommend over gearcm?
tosunkaya said:
Looking well. Im using gearcm now. do you recommend over gearcm?
Click to expand...
Click to collapse
No brother...
basically it is based on cm13 ( @TaylinG )
But it has many more issues than gearcm13
Untill it gets solved...i dont recommnded you but u can try it once
tosunkaya said:
Looking well. Im using gearcm now. do you recommend over gearcm?
Click to expand...
Click to collapse
I'd suggest that you should try it once. I didn't find any issues with the ROM, which aren't already present in GearCM
really good rom.
thanks for share

[RECOVERY][maple]TWRP for the Xperia XZ Premium

NOTICE: As per continuously offending post by people like @FartyParty I don't feel like doing anything for the XZP currently. Enjoy.
P.S: Go to hell if you think free / community developers are your slaves just because they released their work in public
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DOWNLOAD:
https://twrp.me/sony/sonyxperiaxzpremium.html
SOURCES:
Kernel
Device Tree
BUGS:
Please let me know about any bugs you encounter, I will look into them ASAP.
MISC:
The sources are based on what @AndroPlus did so far, but all that is kept ATM is the encryption logic.
The sonyxperiadev kernel gets compiled from source (linked above) and I'm not using any stock code other than the encryption code anymore. A lot of code also has been removed/cleaned up.
XDA:DevDB Information
TWRP, Tool/Utility for the Sony Xperia XZ Premium
Contributors
Myself5
Version Information
Status: Stable
Created 2017-07-20
Last Updated 2018-09-13
:laugh:
That's great. Thank you!
---------- Post added at 10:19 PM ---------- Previous post was at 10:02 PM ----------
bad news !it still displays Sony logo in recovery mode ,similar to [NOSCREEN]TWRP-3.1.1-0-maple
on the G8142_45.0.A.7.90
---------- Post added at 10:24 PM ---------- Previous post was at 10:19 PM ----------
FartyParty said:
Thank you so much! This is amazing!
I flashed it and it works perfectly!
Click to expand...
Click to collapse
What version of your firmware is ? i test on G8142_45.0.A.7.90 , it's not good working--Adb_interface could not find the driver:crying:
oneheart said:
That's great. Thank you!
---------- Post added at 10:19 PM ---------- Previous post was at 10:02 PM ----------
bad news !it still displays Sony logo in recovery mode ,similar to [NOSCREEN]TWRP-3.1.1-0-maple
on the G8142_45.0.A.7.90
---------- Post added at 10:24 PM ---------- Previous post was at 10:19 PM ----------
What version of your firmware is ? i test on G8142_45.0.A.7.90 , it's not good working:crying:
Click to expand...
Click to collapse
I'm on the same fw but did you hold power+volume down to enter twrp?
FartyParty said:
I'm on the same fw but did you hold power+volume down to enter twrp?
Click to expand...
Click to collapse
yes i do,Is it because of Magisk?
oneheart said:
That's great. Thank you!
---------- Post added at 10:19 PM ---------- Previous post was at 10:02 PM ----------
bad news !it still displays Sony logo in recovery mode ,similar to [NOSCREEN]TWRP-3.1.1-0-maple
on the G8142_45.0.A.7.90
---------- Post added at 10:24 PM ---------- Previous post was at 10:19 PM ----------
What version of your firmware is ? i test on G8142_45.0.A.7.90 , it's not good working--Adb_interface could not find the driver:crying:
Click to expand...
Click to collapse
FartyParty said:
I'm on the same fw but did you hold power+volume down to enter twrp?
Click to expand...
Click to collapse
Are you both using the DualSIM variant (G8142)? I built and tested this on the SingleSIM (G8141) so I wouldn't know if there is any potential issue with the DualSIM one. Though, the recommendation to boot using the Power+Vol down combo is probably what you need to try.
EDIT: shouldnt be because of magisk. I'll upload a build that specifically uses the DualSIM kernel, maybe thats what causes your issue.
EDIT2: I derped, there is no DualSIM specific kernel, so your issue must be cause by something else.
Myself5 said:
Are you both using the DualSIM variant (G8142)? I built and tested this on the SingleSIM (G8141) so I wouldn't know if there is any potential issue with the DualSIM one. Though, the recommendation to boot using the Power+Vol down combo is probably what you need to try.
EDIT: shouldnt be because of magisk. I'll upload a build that specifically uses the DualSIM kernel, maybe thats what causes your issue.
EDIT2: I derped, there is no DualSIM specific kernel, so your issue must be cause by something else.
Click to expand...
Click to collapse
I tried and tried ,and still failed! G8142
[/COLOR]
Myself5 said:
Are you both using the DualSIM variant (G8142)? I built and tested this on the SingleSIM (G8141) so I wouldn't know if there is any potential issue with the DualSIM one. Though, the recommendation to boot using the Power+Vol down combo is probably what you need to try.
EDIT: shouldnt be because of magisk. I'll upload a build that specifically uses the DualSIM kernel, maybe thats what causes your issue.
EDIT2: I derped, there is no DualSIM specific kernel, so your issue must be cause by something else.
Click to expand...
Click to collapse
No I'm on single sim so no worries. It works perfectly! I held power+volume down and it went straight into twrp.
oneheart said:
yes i do,Is it because of Magisk?
Click to expand...
Click to collapse
No, I had Magisk installed when flashing this.
Thank you so much, now all we need is a DRM fix and we are good to go.
I suppose that unlocking the bootloader is necessary to flash the recovery?
I don't know what happened, but it success now!however, it cannot mount SD card
oneheart said:
I don't know what happened, but it success now!however, it cannot mount SD card
Click to expand...
Click to collapse
That's an issue with TWRP 3.1.1-0.
Older versions of TWRP can mount just fine.
FartyParty said:
That's an issue with TWRP 3.1.1-0.
Older versions of TWRP can mount just fine.
Click to expand...
Click to collapse
Thank you,,Good night
oneheart said:
I don't know what happened, but it success now!however, it cannot mount SD card
Click to expand...
Click to collapse
Is your sdcard exFat formatted by any chance? I think that might be the cause. Will look into that later today.
Myself5 said:
Is your sdcard exFat formatted by any chance? I think that might be the cause. Will look into that later today.
Click to expand...
Click to collapse
It's not an issue you created but an old issue. Maybe they changed something from the old twrp versions in 3.1.1-0 and now it wont mount because of how its formatted like you said.
When I had the XZ/XZs I always used the old twrp version so it was never an issue for me but now it would be nice to find a solution for it I guess.
I ran blkid in terminal and it said ext4
Keep up the good work :good:
Fixed it.
Had the wrong mount path (that came from the fstab I added, AP had the correct path).
Also enabled exFat support.
https://github.com/Myself5/device-sony-maple-twrp/commit/904ee34e3dbcf4a101ba2f509e4d2659f1ee7fa9
Working image is uploaded:
TWRP-3.1.1-0-maple-20170720-2.img
EDIT: PLEASE DO NOT TRY TO FORMAT USB OTG! I USED THE WRONG PATH THERE, FORMATTING USB OTG COULD ACTUALLY WIPE YOUR PHONES BOOTLOADER.
V3 WILL BE UPLOADED IN A FEW MINUTES
Works! :good::good:
Just uploaded TWRP-3.1.1-0-maple-20170720-3.img
This fixes USB OTG (tested and works), and fixes formatting the SDCard inside TWRP. I also removed V1 and V2 as they both could have gone very wrong when trying to format the USB OTG device. (The path was mapped to /dev/sda, which on maple is.. well.. the UFS storage, and therefore contains the bootloader).
Hence I strongly recommend upgrading to V3.
Sorry for the inconvenience, and thanks to @kholk for pointing out my derp.
Everyone HAS to upgrade to V3 as soon as possible!
The previous versions are really dangerous and can hard brick your device!
Thanks .
Myself5 said:
Just uploaded TWRP-3.1.1-0-maple-20170720-3.img
Click to expand...
Click to collapse
How to boot in recovery from system?
My device with build: 45.0.A.5.1 after "adb reboot recovery" just reboots in system. From powered off state boots in TWRP correctly.
Thanks!

[GCAM] [PIE] Google camera for treble/Android 9

Is there any Google camera APK existing functional on a Trebled Android Pie device? [Redmi 5plus]
did you test this?
https://forum.xda-developers.com/xiaomi-redmi-5a/how-to/google-pixel-2-ported-camera-sd-425-t3737912
https://www.celsoazevedo.com/files/android/google-camera/dev-saneklic/ use the latest one
ranz65 said:
Is there any Google camera APK existing functional on a Trebled Android Pie device? [Redmi 5plus]
Click to expand...
Click to collapse
With this fix camera working for me on pie also face unlock:good:
https://mega.nz/#!D65HwCiK!Sis8rp5A42fY67vUhyx5Dmt5lBUxoIzinTdLszf61wk
Thanks, but...
Not the one nor the second (last and arnovamodRedmi5 :-/
I am on Redmi5plus with Treble Havocos GSI Pie9 1809
nugrahayoga said:
https://www.celsoazevedo.com/files/android/google-camera/dev-saneklic/ use the latest one
Click to expand...
Click to collapse
Is this for pie?
Is it for every device?
---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------
ranz65 said:
Not the one nor the second (last and arnovamodRedmi5 :-/
I am on Redmi5plus with Treble Havocos GSI Pie9 1809
Click to expand...
Click to collapse
Try the fix a post above
---------- Post added at 12:33 PM ---------- Previous post was at 12:30 PM ----------
ranz65 said:
Not the one nor the second (last and arnovamodRedmi5 :-/
I am on Redmi5plus with Treble Havocos GSI Pie9 1809
Click to expand...
Click to collapse
Let me know if it works
aljoscha81 said:
Is this for pie?
Is it for every device?
---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------
Try the fix a post above
---------- Post added at 12:33 PM ---------- Previous post was at 12:30 PM ----------
Let me know if it works
Click to expand...
Click to collapse
No nothing works. Camera stops after start and never gets up...
ranz65 said:
No nothing works. Camera stops after start and never gets up...
Click to expand...
Click to collapse
Yes maybe a rom problem havoc not booting for me every other 9 gsi i can boot without problems only havoc 9 stay at bootanimation for hours i use arrow 9 for now and got everything working only nfc and wifi hotspot needs a fix maybe you can give it a try i like havoc too but i need to get log file while booting but i am not able to working on a pc at the moment i am not at home for longer time but try arrow it is my daily driver and very stable for now don't got any crashes reboots or something......:good:
...
aljoscha81 said:
Yes maybe a rom problem havoc not booting for me every other 9 gsi i can boot without problems only havoc 9 stay at bootanimation for hours i use arrow 9 for now and got everything working only nfc and wifi hotspot needs a fix maybe you can give it a try i like havoc too but i need to get log file while booting but i am not able to working on a pc at the moment i am not at home for longer time but try arrow it is my daily driver and very stable for now don't got any crashes reboots or something......:good:
Click to expand...
Click to collapse
Tried ArrowOS and the device wasn't correctly registered for google, play services don't run. So tried PErom GSI, for the rom all well... but the Google camera is exactly as with HavocOS: doesn't run at all even with fix.
#MODS this should be moved to Treble-Enabled Device Questions and Answers
aljoscha81 said:
Is this for pie?
Is it for every device?
---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------
it is for Redmi 5 Plus (Vince) works fine for me
---------- Post added at 12:30 AM ---------- Previous post was at 12:29 AM ----------
ranz65 said:
Not the one nor the second (last and arnovamodRedmi5 :-/
I am on Redmi5plus with Treble Havocos GSI Pie9 1809
Click to expand...
Click to collapse
what gapps did you flash, choose pico or nano.
Click to expand...
Click to collapse
ranz65 said:
Tried ArrowOS and the device wasn't correctly registered for google, play services don't run. So tried PErom GSI, for the rom all well... but the Google camera is exactly as with HavocOS: doesn't run at all even with fix.
Click to expand...
Click to collapse
Try with universal safety net fix magisk module or install magisk props config to verify
aljoscha81 said:
Yes maybe a rom problem havoc not booting for me every other 9 gsi i can boot without problems only havoc 9 stay at bootanimation for hours i use arrow 9 for now and got everything working only nfc and wifi hotspot needs a fix maybe you can give it a try i like havoc too but i need to get log file while booting but i am not able to working on a pc at the moment i am not at home for longer time but try arrow it is my daily driver and very stable for now don't got any crashes reboots or something......:good:
Click to expand...
Click to collapse
with Havoc you have to restore a working Boot partition back up from another treble rom .-. at least that's how it was for me on the LG V30+ and camera worked 100% of the time
Gzhahajsb sb
There is a new gcam with night sight out there how to get it working on a treble gsi the camera apk is from pixel 3 and must be amazing ! So far as i read about best camera software of the smartphone world ahhh it is itching under my nails please share if someone got a mod or got it working anyhow
I simply flashed aroma gapps in twrp recovery with camera at GSI installation.. then update in play store.. works 100%.. no other way works for me.. good luck..
aljoscha81 said:
With this fix camera working for me on pie also face unlock:good:
https://mega.nz/#!D65HwCiK!Sis8rp5A42fY67vUhyx5Dmt5lBUxoIzinTdLszf61wk
Click to expand...
Click to collapse
It would be nice to have this fix in gsi. What is this fix?Where is the source code for it?
phhusson said:
It would be nice to have this fix in gsi. What is this fix?Where is the source code for it?
Click to expand...
Click to collapse
Sorry man i thinking and thinking over it is not build by me but also here on xda ohh man i think over it is so long time past......will report later
I cant really remember but i think by flash the zip. By twrp recovery will show up the name of creator but maybe i am wrong at the moment i am on the liquid remix rom pie there i don't use this fix anymore
lowkeyst4tus said:
I simply flashed aroma gapps in twrp recovery with camera at GSI installation.. then update in play store.. works 100%.. no other way works for me.. good luck..
Click to expand...
Click to collapse
I just tried that on my Axon7 with Liquid Remix Pie, but once in play store, I only am able to install gcam from 2017 :/

[ROM][Q]Color OS 7.1

OPPO COLOR OS
IMPORTANT: VENDOR PARTITION NEEDED BEFORE FLASHING!
Make sure you have VENDOR PARTITION on your device before flashing the rom or else you will get boot loop or brick. You can check the forum for how to enable vendor partition or treble on your device.
Use this file for creating vendor Partition by flash in twrp.
Make backup first before flashing.
Flash zip, go to wipe and advance, select resize partition, then select vendor, choose where you want to create the vendor partition from( system recommend, and also the size should be 512 and above)
After creating the vendor partition, reboot recovery and format system, vendor and caches. Now you can flash rom.
The vendor ziphttps://1drv.ms/u/s!ArSQ9UltpYJiuQsXTObSAjJZbJtI?e=8MX9JA
BUGS:NFC,FINGER
How install my rom
This rom is a backup ROM
1.UNZIP MY ROM TO SDCARD/TWRP
2.WIPE DATA
3.RESTORE MY ROM IN TWRP
4.REBOOT
ROM Download link:https://drive.google.com/file/d/1Cy9urCoXzovQ-ocmGSp1u2Qj-RcUsWsx/view?usp=sharing
IF THR BRIGHTNESS ISNT WORKING PLEASE MOUNT VENDOR AND FLASH THIS https://drive.google.com/file/d/1Se7ob3_8WhYU-qcNOIkyJQy0j5FlCnHC/view?usp=sharing
Tx a lot.
btw, this new boot-vendor fixed the camera for me in the miui12Q. but still not stable, it has a few random reboots ...
We look forward to receiving COOK ROM support from you. and receive global language R
We look forward to receiving COOK ROM support from you. and receive global language ROMs. The country we need Google Services in. Thank you very much
every recovery is perfect until Vendor file recovery error.I have 512MB size partition
---------- Post added at 06:18 PM ---------- Previous post was at 05:18 PM ----------
the restore vendor error
Im gonna try that rom hopefully things will be known by then n thanks alot for new rom...
for me, navigation buttons are not working, only gesture option works
hahmad78 said:
for me, navigation buttons are not working, only gesture option works
Click to expand...
Click to collapse
after installing Gapps. please delete the pixel launcher
Alredy fix
4shared said:
Tx a lot.
btw, this new boot-vendor fixed the camera for me in the miui12Q. but still not stable, it has a few random reboots ...
Click to expand...
Click to collapse
i will update MIUI this week(My another accont SKDushow)
Thkans for your replay
Manhmixi1997 said:
We look forward to receiving COOK ROM support from you. and receive global language ROMs. The country we need Google Services in. Thank you very much
Click to expand...
Click to collapse
I will add google play next time
Big W2333 said:
I will add google play next time
Click to expand...
Click to collapse
kindly made it compatible with system partition less than 6 gb,
AOD is working in it?
Big W2333 said:
i will update MIUI this week(My another accont SKDushow)
Click to expand...
Click to collapse
GSI ROM works unstable, Can you port the Zip ROM to LG V30? The MI Mix 2 device shares the S835 chip:laugh:
good rom works flawlessly and had same mentioned bugs which is unfortunate for this caliber rom and no gallery app plus gapps kindly guide related that im looking for video editing like Lg gallery kindly advise me related that all if anyone had deeply used it kindly
@Big W2333 sorry for asking the rom that not related. But is there any update for miui 12??
大佬你好,刷了你的color os后,启动器无法更换静态壁纸有解决方案吗
---------- Post added at 12:45 PM ---------- Previous post was at 11:45 AM ----------
还有就是这个系统精简过头了,日常需要用到的录音机,相册,计算器都没有,第三方的替代感觉好违和
Unite_LD said:
大佬你好,刷了你的color os后,启动器无法更换静态壁纸有解决方案吗
---------- Post added at 12:45 PM ---------- Previous post was at 11:45 AM ----------
还有就是这个系统精简过头了,日常需要用到的录音机,相册,计算器都没有,第三方的替代感觉好违和
Click to expand...
Click to collapse
当时为了精简system的时候删的,我在酷安有传过一个精简列表
Will volte or vowifi work on this rom?
markdcouto said:
Will volte or vowifi work on this rom?
Click to expand...
Click to collapse
No. VoLTE is only on stock firmware or stock based ROMs.
When is the update that will contain gapps coming?
Waiting for it before I download and install
I hope it is English system wide?
蓝牙能用就行吗?

Categories

Resources