I can't download that file for that rom (http://forum.xda-developers.com/showthread.php?t=1200517) because multiupload is down. Could someone give me that file?
How To install Cygwin And Use Splitfus2
You can download any stock rom package for galaxy y from Sammobile and use Splitfus2 to split it into odin flashable parts
Skip how to install Cygwin if you already have it set up but if you run into problems later come back to this and set up Cygwin again properly
How to install Cygwin Properly
uninstall any version of Cygwin you currently have installed
now install Java SE Development Kit 7 from here
now download the 32bit x86 version of Cygwin from here
Run the setup and make sure you install all the packages by clicking the arrow at the top that changes everything from default to install all
Make sure you have selected the root of your harddrive to install it in Cygwin folder for eg c:\cygwin
Now you can install cygwin
For detailed video instructions watch http://www.youtube.com/watch?feature=player_embedded&v=sYJMdHPD410 (skip the bit at end about setting up kitchen - you just want Cygwin)
How To Install Splitfus2 And Run It
Download Splitfus2 attachment
now navigate to C:\cygwin\home\your username
create a folder called splitfus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
unzip the Splitfus2 zip and place the containing splitfus2.exe and _base folder in the splitfus folder
place the stock firmware you want to split also in the splitfus folder
run Cygwin
type cd splitfus
now type ls
type ./splitfus2.exe -w S5360nameofyour firmware (note to make it easier just type S5360 then press the tab key and it will auto compleate - also note it is case sensitive and it starts dot then a forward slash)
now your firmware will be split and output in a zip file to your splitfus folder
unzip and use in odin
You can find already split firmware and links to dokys original threads here
Supported Models
B5510
S3300
S5360
S5360B
S5360L
S5360T
S5363
S5369
S5570I
S5830i
S6102
credits
doky for splitfus2
gitagaire for youtube video
Added Info!!
I have made a video on how to setup Cygwin Kitchen on linux in less than a minute.
Here's the link to the video: http://www.youtube.com/watch?v=Z45ocbB7e24
I have mentioned everything in detail in the description of the video.
Maybe you can add it if you find it useful!
the_pirate_predator said:
I have made a video on how to setup Cygwin Kitchen on linux in less than a minute.
Here's the link to the video: http://www.youtube.com/watch?v=Z45ocbB7e24
I have mentioned everything in detail in the description of the video.
Maybe you can add it if you find it useful!
Click to expand...
Click to collapse
this thread is for using splitfus2
if you had the splitfus2 linux version and guide I could add it to this thread
by all means create a seperate thread for setting up kitchen on linux
just as a note Cygwin is a linux terminal emulator for windows - its not for linux
Thanks
Thanks for correcting my mistake!
I found that sir Doky has already made a tutorial: http://forum.xda-developers.com/showpost.php?p=25130022&postcount=2
the_pirate_predator said:
Thanks for correcting my mistake!
I found that sir Doky has already made a tutorial: http://forum.xda-developers.com/showpost.php?p=25130022&postcount=2
Click to expand...
Click to collapse
thats ok - I recreated tutorials in a simple step by step form and also reuploaded files as the files on dokys threads now no longer work due to hotfile being closed down
splitting s5839i
hi,
i'm trying to split the latest UK galaxy ace firmware: S5839iBUMG1_S5839iVOPMG1_S5839iBULK1_HOME.tar.md5
is this possible as i've tried without luck or does splitfus not support s5839i
does it only split s5830i and not the above
cbbella said:
hi,
i'm trying to split the latest UK galaxy ace firmware: S5839iBUMG1_S5839iVOPMG1_S5839iBULK1_HOME.tar.md5
is this possible as i've tried without luck or does splitfus not support s5839i
does it only split s5830i and not the above
Click to expand...
Click to collapse
iv added the supported models to the op the s5839i is not included - the best person to contact is doky as he created this programme to see if there is a way to easily add your phone model
i dont know if you can simply copy the s5830i file in the base folder and rename the copy to s5839i - iv no idea if it will work and it may cause damage to your device if the phones are different in terms of mount points and partitions
I downloaded odin 3.07 and it flashed using the single file so no need to split when using odin 3.07. Happy days.
Sent from my GT-I9300 using Tapatalk
cbbella said:
I downloaded odin 3.07 and it flashed using the single file so no need to split when using odin 3.07. Happy days.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
later phones support single file firmware files - this was made for the galaxy y which didnt
not able to install cygwin on win7.
as per above procedure i was trying to install cygwin on my win7 pc but the installation was unsuccessfull. after downloading cygwin setup.exe and running & trying to connect through direct internet option then selecting mirror link, the download not started. i have tried several link given in setup installation windows also my internet connection are working properly. so is there any way to install this program without internet connection i mean to say just downloading on another pc & installing it in another. and also i want to ask u that is after installing cygwin setup i think there is window to select package so which are the package i should have to select. my main concern to ask this is, as you have suggested me in another thread make odin flashable rom package for my samsung galaxy y pro duos GT B5512 downlaoded from sammobile.com
please help us!
lastword said:
as per above procedure i was trying to install cygwin on my win7 pc but the installation was unsuccessfull. after downloading cygwin setup.exe and running & trying to connect through direct internet option then selecting mirror link, the download not started. i have tried several link given in setup installation windows also my internet connection are working properly. so is there any way to install this program without internet connection i mean to say just downloading on another pc & installing it in another. and also i want to ask u that is after installing cygwin setup i think there is window to select package so which are the package i should have to select. my main concern to ask this is, as you have suggested me in another thread make odin flashable rom package for my samsung galaxy y pro duos GT B5512 downlaoded from sammobile.com
please help us!
Click to expand...
Click to collapse
follow my instructions on the op for installing cygwin
you do not need internet to install cygwin
download the package from the link given in the op
run the setup
select install from a package folder on harddrive
select the package folder you have downloaded from the link given in the op (the same as the setup.exe)
DO NOT DOWNLOAD THE PACKAGE FROM THE CYGWIN SETUP! INSTALL FROM HARDDRIVE!
also B5512 is not in the support list but B5510 is - I dont know if you can use B5510 firmware on B5512
how to make my firmware supported by splitfus? do i need to a img file in the base folder?
badagila said:
how to make my firmware supported by splitfus? do i need to a img file in the base folder?
Click to expand...
Click to collapse
I wasnt the one who created it - it was doky but the img files in the base folder are the support models
what phone do you have - if its not on the support list the chances are your phone supports single file flashing and you can just put the single file firmware pack in pda and flash it
marcussmith2626 said:
I wasnt the one who created it - it was doky but the img files in the base folder are the support models
what phone do you have - if its not on the support list the chances are your phone supports single file flashing and you can just put the single file firmware pack in pda and flash it
Click to expand...
Click to collapse
samsung galaxy gio s5660
badagila said:
samsung galaxy gio s5660
Click to expand...
Click to collapse
your phone is not supported by splitfus2
your phone may support single file firmware flashing - download firmware from sammobile.com unzip and place in pda section
Else please refer to your own phones forum if it has one as I only support 5360
i have successfully installed cygwin as per above instruction on my pc to make odin flashable firmware downloaaded from sammobile.com for my sgy pro duos gt b5512. but after running as per above procedure up to splitfus command line i am ok but when i am tryinng to enter following command in cygwin
./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS
i get following message in cygwin
bash./ ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS no such file and directory
then myself i checked the command and make correction bu still i get following error
***error decoding filename
i am following all instruction given above but i think some thing little mistake that i dont know that i was doing so please guide me details.
lastword said:
i have successfully installed cygwin as per above instruction on my pc to make odin flashable firmware downloaaded from sammobile.com for my sgy pro duos gt b5512. but after running as per above procedure up to splitfus command line i am ok but when i am tryinng to enter following command in cygwin
./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS
i get following message in cygwin
bash./ ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS no such file and directory
then myself i checked the command and make correction bu still i get following error
***error decoding filename
i am following all instruction given above but i think some thing little mistake that i dont know that i was doing so please guide me details.
Click to expand...
Click to collapse
Please read the 1st post B5512 is NOT on the support list
also if you type ls at the promp it will tell you where you are in the directory and what files are in that directory
also ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS is wrong it should be
./splitfus2.exe -w B5512XWLG1_B5512ODDLG_INS
as I said though B5512 is not on the support list so chance of it working unlikely
have you tried single file flashing? ie just putting the firmware you downloaded from sammobile into the pda section and flashing it?
I cant offer any other support as your device is not supported and this is the 5360 forum
marcussmith2626 said:
Please read the 1st post B5512 is NOT on the support list
also if you type ls at the promp it will tell you where you are in the directory and what files are in that directory
also ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS is wrong it should be
./splitfus2.exe -w B5512XWLG1_B5512ODDLG_INS
as I said though B5512 is not on the support list so chance of it working unlikely
have you tried single file flashing? ie just putting the firmware you downloaded from sammobile into the pda section and flashing it?
I cant offer any other support as your device is not supported and this is the 5360 forum
Click to expand...
Click to collapse
i have tryied it to put single filr earlier but in that case in odin there is not able to select file option in pda other than .tar .md5 etc so how i can try to flash single file through odin sorry for asking in wrong thread buut there is no active thread for gt b5512 and for my bad english.and last i think there is no hope for my sgy pro duos gt b5512.
lastword said:
i have tryied it to put single filr earlier but in that case in odin there is not able to select file option in pda other than .tar .md5 etc so how i can try to flash single file through odin sorry for my bad english.
Click to expand...
Click to collapse
once you have downloaded the firmware from sammobile use winrar (or another unzipper) to unzip the firmware
you should have a file like the following
ModelofphoneXXXX1_ModelofphoneXXXXX1_ModelofphoneXXXXX_HOME.tar.md5
click pda and navigate to where that file is and you can select it
finally i have flashed my sgy gt b5512 through odin but still it stuck into samsung logo. but after complteing all finally i received message that pass in odin and then my phone boots but now in samsung logo still so is there any idea. another thing is that now my phone can enter into recovery mode which before was not. and in that i have tried to wipe cache and partion but still not working. please reply us.
I'm looking for a place to download BOI1 stock .tar rom for my G920P. I had sight on one link from Rapidgator but it doesn't seem to work because I don't have Premium Account. My internet cannot download it at all.
So if anyone knows a place to get it or by any chance have this file, please help me upload it to a server like google drive or androidfilehost..., etc. I'm desperately in need. Many thanks in advance!
huynguyenrv11 said:
I'm looking for a place to download BOI1 stock .tar rom for my G920P. I had sight on one link from Rapidgator but it doesn't seem to work because I don't have Premium Account. My internet cannot download it at all.
So if anyone knows a place to get it or by any chance have this file, please help me upload it to a server like google drive or androidfilehost..., etc. I'm desperately in need. Many thanks in advance!
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347831652 MD5: ff538bc518bb98dd9cb444793e7b8b25
If you want OJ7 (somewhat newer) please see:
https://www.androidfilehost.com/?fid=24269982087002159 MD5: fe1d4a7b3ad20f3e79efc7526e95143d
Thanks man, you are a live saver! :fingers-crossed:
Hi guys, I am a new user here, so, I got a problem. I need Nokia x stock ROM in highly compressed mode, less than 100 MB if anyone can. I live in a backward area and am not much wealthy. I downloaded stock ROM file from a website(I don't remember the website), it contained 2 folders, META-INF and System and one boot.img file. I was confuse at first. I compressed the system folder and renamed its extension from '.zip' to '.img' and then tried flashing, nothing happened:crying::crying:. I searched many websites hoping to find compressed file of stock ROM. but failed. at last I tried XDA developers. I know that someone will be there to help me in this website. i will remain evergrateful to you guys if anyone could help me.
if someone compressed it then please send it to [email protected] please please please please please:good::good::good::goodlease
Redgrave Wolfeinstein said:
Hi guys, I am a new user here, so, I got a problem. I need Nokia x stock ROM in highly compressed mode, less than 100 MB if anyone can. I live in a backward area and am not much wealthy. I downloaded stock ROM file from a website(I don't remember the website), it contained 2 folders, META-INF and System and one boot.img file. I was confuse at first. I compressed the system folder and renamed its extension from '.zip' to '.img' and then tried flashing, nothing happened:crying::crying:. I searched many websites hoping to find compressed file of stock ROM. but failed. at last I tried XDA developers. I know that someone will be there to help me in this website. i will remain evergrateful to you guys if anyone could help me.
if someone compressed it then please send it to [email protected] please please please please please:good::good::good::goodlease
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. To get you the best help possible, I'm going to move this thread to your device's Q&A forum.
Good luck!