Vanilla-ish AOSP 6.0.1_r9 ROM (MMB29S) for WiFi Nexus 9
This was created by building from MMB29S source and adding SuperSU/BusyBox... Plus customizations (advanced power menu, ART optimizations) borrowed from @GROGG88 on Nexus 5 forum and @craigacgomez. Also WebView commits from @craigacgomez.
Featuring:
Vanilla AOSP 6.0.1_r9 (MMB29S) for WiFi Nexus 9
v0.16 and up work with OpenGapps
ROOT and permissive kernel based on https://android.googlesource.com/kernel/tegra/+/android-tegra-flounder-3.10-marshmallow with added features!
Busybox v1.22.1 bionic now included
All future Marshmallow builds will all be based on this table - https://source.android.com/source/build-numbers.html#source-code-tags-and-builds
I included RIL during building MMB29S so LTE (volantisg) should work WILL NEED A TESTER
UBERTC 5.2.1 arm64 compiled 3.10.40-marshmallow kernel
Decrypted device supported!
Can use f2fs for cache now! Thanks @xiaolvmu
Fast charge fix plus Force Fast Charge toggle added (Force Fast Charge off by default). Thanks @USBhost and @Captain_Throwback!
FSYNC toggle @franciscofranco
Use Kernel Adiutor from Play Store to toggle Force Fast Charge/toggle FSYNC - Fast Charge will disable media sharing with your PC to get a faster charge on low amperage USB ports...
I/O schedulers added - SIO, deadline FIOPS and cfq - SIO to default
OTG native support ( @craigacgomez) - use your favorite file manager
Advanced TCP congestion - cubic still default
File system support added for NTFS, EXFAT and CIFS - thanks @Captain_Throwback - also EXT4 for EXT3 support to optimize size a bit more
SELINUX to permissive
SuperSU 2.52 ( @Chainfire) - VERIFIED working
MiXplorer 5.4.6.BETA-B1509012 @HootanParsa (http://forum.xda-developers.com/showthread.php?t=1523691)
Reboot Menu with submenu for Reboot, Recovery and Bootloader respectively (from Nexus 5 forum THANKS @GROGG88)
Setup wizard crash fix (prefer Google WebView over AOSP fix from @craigacgomez)
MUST Flash a GApps (see Downloads) EVEN IF UPDATING from prior version(s)
***NOTE if using minimal GApps download any additional Google apps you might need that are missing from the Play Store!
Source:
https://github.com/bshiznit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please use TWRP 2.8.7.0. Must be at bootloader 3.48.0.0135 and have flashed the latest MMB29S vendor image (linked under downloads)!
Please wipe data and both caches (in TWRP got to Wipe --> "Swipe to Factory Reset") if not coming from my LMY48M ROM (I need to test) - otherwise please wipe
Downloads
Before flashing scroll down and read NOTES!
ROM
ODEX (faster initial boot and overall performance potentially):
MEGA https://mega.nz/#!7IdQETSL!aKO6ZwMSs1OoxRg6ECkEqLZDZYXH12cVa-HcQLZ46Q8
Dev-Host http://d-h.st/dlZF
md5 - 921aed6769acb63539bc0a3c752ee2af
DEODEX (for Xposed/GravityBox, theming, etc.):
MEGA https://mega.nz/#!zV0GQQhS!B0NjHyyzcxIj2IMgA6G0vZnv9lwywef3ckliMBEc2Nk
Dev-Host http://d-h.st/r8bu
md5 - 23b5b5483dc27778233419617fe54126
3.48.0.0135 bootloader and MMB29S vendor.img
WIFI:
MEGA https://mega.nz/#!mAs1zSrR!SNLB9nyfezzTMGFyh1yLaohP1Dv1w3kNcbCzZAszuW0
md5 - 11c6f1d2466b1be2eac66b99e9398213
LTE:
MEGA https://mega.nz/#!qV0SSSSB!BcaxZa_9NbGWWSBgY9lKb5C_ZV1OYwTmE0THSBI906U
md5 - f0eda5063e884f9ff5951e1449de919f
NEED fastboot
In fastboot:
WIFI:
fastboot flash bootloader bootloader-flounder-3.48.0.0135.img
LTE:
fastboot flash bootloader bootloader-flounder_lte-3.48.0.0135.img
Both:
fastboot reboot-bootloader
fastboot flash vendor vendor.img
Then ROM
Open GApps (closer to STOCK - choose ARM64 for Platform, 6.0 for Android then pick Stock for Variant)
http://opengapps.org/
I FLASHED:
MEGA https://mega.nz/#!fZFGxCxT!6k-DGsrmA3N_ATNJ3Odt2FBSgS-4go48r5ZGjcqXk3o
Dev-Host http://d-h.st/D4Jb
md5 - 3df13b1c7b666828bc0c2c03933f4f15
BaNkS Dynamic GApps
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
I FLASHED:
MEGA https://mega.nz/#!WNd3hAbB!DhcVL0Sfohyvg0-IyaZL8lLobzO7h7dgX5vl50OVSoY
Dev-Host http://d-h.st/S3zV
md5 - 857829d0e0d076b717cbb6c6355e229b
NOTE takes a WHILE (5-10 minutes) to boot up on first boot! ART is optimizing applications and it is set to EVERYTHING as we have sufficient system partition storage - for SPEED. There is no more dalvik-vm (no REALLY now - not even included in AOSP now)!
If you like it hit thanks! Donations are appreciated but never expected
I do this for a hobby and to keep my tablet running like new
Coming soon:
6.0 GApps links
Busybox inclusion
3.48.0.0135 bootloader and MRA58N vendor image downloads
NOTES:
ALWAYS flash GApps even if updating from a prior AOSP 5.1.x/6.0 release! ALL ROMs format the /system partition as part of the installation process and this is where the GApps are kept!
BACKUP using TWRP and/or Titanium - save those files off the device to a USB stick external HDD or whatnot! Not responsible for lost data!
WIPE Data in recovery unless coming from another Vanilla AOSP 5.1.x ROM!
Be sure you are at bootloader 3.48.0.0135 and have flashed latest vendor image (steps in this post)
ONLY TESTED USING TWRP 2.8.7.0
MUST FLASH a GApps zip after the ROM for Play Store, etc.
If you like it consider donating! A nice big solid state hard drive will let me build faster and for more devices! (YAY my build box now has 411GB free even after all this developing - thanks to all who donated)
Thanks:
@Chainfire for SuperSU and keeping it updated!
@Snuzzo for github familiarization and being a great dev and resource!
@GROGG88 - for the power menu and other patches (even though it was from Nexus 5 it worked great)!!!!
@craigacgomez for reboot submenu and OTG commits @Captain_Throwback and @USBhost for fast charge and additional file system commits, busybox
@dankoman and @Deltadroid for helping us in trying to get arm64 Gapps
@sykopompos for the sepolicy file and kernel instructions to allow root as well as the ART build.prop tweaks.
@scrosler great dev and good resource
Google for Android
AOSP for source!
Changelog:
MMB29S v0.51
Compiled from 6.0.1_r9 MMB29S source (ROM/kernel)
MMB29K v0.50
Compiled from 6.0.1_r1 MMB29K source (ROM/kernel)
MRA58N v0.16
Commits for OpenGapps compatibility (should also fix GMail issues, etc.)
MRA58N v0.15
No more AdAway as system app
MRA58N ROM and kernel
Busybox static included
MRA58K v0.12
SuperSU working now v2.52
AdAway working now v3.1
Stock sounds
Re-enabled gesture typing in AOSP keyboard - not sure if I will keep this setting
Allow unknown sources by default
Extras/Additions:
Other kernels
FIRE-ICE @USBhost http://forum.xda-developers.com/nexus-9/orig-development/kernel-fire-ice-t2930451
NaHCO3 @xiaolvmu http://forum.xda-developers.com/nexus-9/orig-development/kernel-s-nexus-9-kernel-t3168833
ElementalX @flar2 http://forum.xda-developers.com/nexus-9/orig-development/kernel-elementalx-n9-0-02-alpha-t2931657
Apps
AdAway 3.1 (55) built 2015/11/13 (attached to this post)
Keyboard FC
Well I tried the BaNkS-Dynamic-GApps-5.x.x-9-22-15 and I get setup wizard BUT keyboard FCs... Stay tuned all! Look for a v0.11 soon...
@bshiznit Can you post the apk of AOSP keyboard built from the lastest sources?
Cata98 said:
@bshiznit Can you post the apk of AOSP keyboard built from the lastest sources?
Click to expand...
Click to collapse
Try the attached
bshiznit said:
Try the attached
Click to expand...
Click to collapse
v0.11 UP - no using the old 5.1.1 BaNks Dyanmic GApps does not work - still get the AOSP Keyboad FC, so stay tuned for a GApps we can use!
Can you add the support for the LTE model.
Envoyé de mon HTC One M9 en utilisant Tapatalk
Thanks for this ROM. It's working fine so far. I only have to flash bootloader and vendor, then boot in TWRP (2.8.7.0), format /data, flash ROM and it boots.
Any news about a working gapps package for this baby?
Gapps
jolinnard said:
Thanks for this ROM. It's working fine so far. I only have to flash bootloader and vendor, then boot in TWRP (2.8.7.0), format /data, flash ROM and it boots.
Any news about a working gapps package for this baby?
Click to expand...
Click to collapse
Did you see those in this link
Max128 said:
Can you add the support for the LTE model.
Envoyé de mon HTC One M9 en utilisant Tapatalk
Click to expand...
Click to collapse
Try it should work
GApps - still in work (esp. for Arm64)
BOSSPDA said:
Did you see those in this link
Click to expand...
Click to collapse
GApps:
http://files.oceighty.co/gapps/ - TRY benzo-gapps-M-20151006-signed.zip seems to hang on screen after connecting WiFi and hitting next - could try flashing after connecting to Wifi and rebooting after intial boot...
OR the other ones linked above Slim_mini_gapps.BETA.6.0.build.0.x-20151007.zip
BOSSPDA said:
Did you see those in this link
Click to expand...
Click to collapse
arm64 is disabled in Slim build. We have to wait:
https://github.com/dankoman30/slimlp_gapps/commit/1741f61a034d280e3b8613c84dfffe3fe950fbb7
bshiznit said:
GApps:
http://files.oceighty.co/gapps/ - TRY benzo-gapps-M-20151006-signed.zip
OR the other ones linked above Slim_mini_gapps.BETA.6.0.build.0.x-20151007.zip
Click to expand...
Click to collapse
benzo gapps are for ARM64?
Edit: ok, still in work
jolinnard said:
arm64 is disabled in Slim build. We have to wait:
https://github.com/dankoman30/slimlp_gapps/commit/1741f61a034d280e3b8613c84dfffe3fe950fbb7
benzo gapps are for ARM64?
Edit: ok, still in work
Click to expand...
Click to collapse
YUP no arm64 GApps (yet)...
What about the ones found here, http://opengapps.org/?
try to flash the vendor got an error...
hboot 3.44.1.0123
Those gapps don't support arm64 so they aren't usable for the Nexus 9. Just tried to use them and they failed.
---------- Post added at 12:07 AM ---------- Previous post was at 12:05 AM ----------
spotmark said:
What about the ones found here, http://opengapps.org/?
Click to expand...
Click to collapse
They don't have 6.0 gapps available yet which means they won't work either. We need ARM64 6.0 Gapps, specifically.
bshiznit said:
Vanilla-ish AOSP 6.0.0_r1 ROM (MRA58K) for WiFi Nexus 9
This was created by building from MRA58K source and adding SuperSU/(BusyBox coming ASAP)... Plus customizations (advanced power menu, ART optimizations) borrowed from @GROGG88 on Nexus 5 forum and @craigacgomez. Also WebView commits from @craigacgomez.
Featuring:
Vanilla AOSP 6.0.0_r1 (MRA58K) for WiFi Nexus 9
ROOT and permissive kernel based on https://android.googlesource.com/kernel/tegra/+/android-tegra-flounder-3.10-marshmallow with added features!
Still need to get busybox to compile and include it - meantime if you have a need try https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
BLEEDING still - may be bugs. My future Marshmallow builds will all be based on this table - https://source.android.com/source/build-numbers.html#source-code-tags-and-builds
I included RIL this time building MRA58K so LTE (volantisg) should work WILL NEED A TESTER
UBERTC 5.2 arm64 compiled 3.10-marshmallow kernel
Decrypted device supported!
Can use f2fs for cache now! Thanks @xiaolvmu
Fast charge fix plus Force Fast Charge toggle added (Force Fast Charge off by default). Thanks @USBhost and @Captain_Throwback!
FSYNC toggle @franciscofranco
Use TricksterMod or Kernel Adiutor from Play Store to toggle Force Fast Charge/toggle FSYNC - Fast Charge will disable media sharing with your PC to get a faster charge on low amperage USB ports...
I/O schedulers added - SIO, deadline FIOPS and cfq - SIO to default
OTG native support ( @craigacgomez) - use your favorite file manager
Advanced TCP congestion - cubic still default
File system support added for NTFS, EXFAT and CIFS - thanks @Captain_Throwback - also EXT4 for EXT3 support to optimize size a bit more
SELINUX to permissive
SuperSU 2.50 ( @Chainfire)
AdAway 3.0.2 compiled and packed to signed apk by me
MiXplorer 5.4.6.BETA-B1509012 @HootanParsa (http://forum.xda-developers.com/showthread.php?t=1523691)
Reboot Menu with submenu for Reboot, Recovery and Bootloader respectively (from Nexus 5 forum THANKS @GROGG88)
Setup wizard crash fix (prefer Google WebView over AOSP fix from @craigacgomez) - I HOPE is still fixed awaitig GApps
MUST Flash a GApps (see Downloads) EVEN IF UPDATING from prior version(s)
***NOTE if using minimal GApps download any additional Google apps you might need that are missing from the Play Store!
Source:
https://github.com/bshiznit
Please use TWRP 2.8.7.0. Must be at bootloader 3.48.0.0135 and have flashed the latest MRA58K vendor image (links soon)!
Please wipe data and both caches (in TWRP got to Wipe --> "Swipe to Factory Reset") if not coming from my LMY48M ROM (I need to test) - otherwise please wipe
Downloads
Before flashing scroll down and read NOTES!
ROM
MEGA https://mega.nz/#!yNtnABCK!6hdSJ2um01BnbDC82bdxIYkkkE7pfDHQ1uTfgMvR628
Dev-Host http://d-h.st/g0NS
md5 - 3401acf14f0b43e9b4c289474dfd4815
3.48.0.0135 bootloader and MRA58K vendor.img
MEGA https://mega.nz/#!7ckxiRCJ!y-wtY8Sn4Q68IM2H6j8vjtIcwVPzyUlIupSe7IzmOU4
Dev-Host http://d-h.st/0zAT
md5 - cbe0fc8b60a30d84861c51e7b4c90286
Open GApps (PENDING) (closer to STOCK - choose ARM64 for Platform, 6.0 for Android then pick Stock for Variant) - http://opengapps.org/
Minimal Dynamic GApps (SITE DOWN at time of writing) (from http://fitsnugly.euroskank.com/?rom=banks&device=gapps)
MEGA https://mega.nz/#!aJNwAKjI!KFqN9LEWbhg2UvW6R_QuRKqMnoyZ7VXsuV17cAy0mw0
Dev-Host http://d-h.st/HPyP
md5 - 5f8c184424112a265f76681618b92f08
NOTE takes a WHILE (5-10 minutes) to boot up on first boot! ART is optimizing applications and it is set to EVERYTHING as we have sufficient system partition storage - for SPEED. There is no more dalvik-vm (no REALLY now - not even included in AOSP now)!
If you like it hit thanks! Donations are appreciated but never expected
I do this for a hobby and to keep my tablet running like new
Coming soon:
6.0 GApps links
Busybox inclusion
3.48.0.0135 bootloader and MRA58K vendor image dowloads
NOTES:
ALWAYS flash GApps even if updating from a prior AOSP 5.1.x/6.0 release! ALL ROMs format the /system partition as part of the installation process and this is where the GApps are kept!
BACKUP using TWRP and/or Titanium - save those files off the device to a USB stick external HDD or whatnot! Not responsible for lost data!
WIPE Data in recovery unless coming from another Vanilla AOSP 5.1.x ROM!
Be sure you are at bootloader 3.48.0.0135 and have flashed latest vendor images (link soon)
ONLY TESTED USING TWRP 2.8.7.0
MUST FLASH a GApps zip after the ROM for Play Store, etc.
If you like it consider donating! A nice big solid state hard drive will let me build faster and for more devices! (YAY my build box now has 411GB free even after all this developing - thanks to all who donated)
Thanks:
@Chainfire for SuperSU and keeping it updated!
@Snuzzo for github familiarization and being a great dev and resource!
@GROGG88 - for the power menu and other patches (even though it was from Nexus 5 it worked great)!!!!
@craigacgomez for reboot submenu and OTG commits @Captain_Throwback and @USBhost for fast charge and additional file system commits
@sykopompos for the sepolicy file and kernel instructions to allow root as well as the ART build.prop tweaks.
@scrosler great dev and good resource
Google for Android
AOSP for source!
Click to expand...
Click to collapse
do you have deodexed binaries for arm64 from volantis factory image? i can add to slim gapps if you do. i can't extract volantis factory image on my piece of crap work PC because it's over 2gb in size.
specifically, i'm looking for:
Code:
/system/app/FaceLock/*
/system/priv-app/HotwordEnrollment/*
/system/priv-app/PrebuiltGmsCore/*
/system/lib64/libfilterpack_facedetect.so
/system/lib64/libjni_latinime.so
/system/lib64/libjni_latinimegoogle.so
dankoman said:
do you have deodexed binaries for arm64 from volantis factory image? i can add to slim gapps if you do. i can't extract volantis factory image on my piece of crap work PC because it's over 2gb in size.
specifically, i'm looking for:
Code:
/system/app/FaceLock/*
/system/priv-app/HotwordEnrollment/*
/system/priv-app/PrebuiltGmsCore/*
/system/lib64/libfilterpack_facedetect.so
/system/lib64/libjni_latinime.so
/system/lib64/libjni_latinimegoogle.so
Click to expand...
Click to collapse
Sure one sec - API23 cross your fingers... I do have the SDK pieces in place.
@dankoman - kitchen doesn't seem to be deodexing... Any tips?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE ASUS STOCK JB 4.2.1 BOOTLOADER VERSION 10.6.1.27.x AND TWRP 2.6.3.1+ OR CWM 6.0.4.6+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM base. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 10 mins to stabilise!
Features and Tweaks
This ROM is based from CM11 AOSP sources
Based off cm-11.0-20140901-crombi-kk-RC2-tf300t Kitkat 4.4.4rc2 source by lj50036
Full Aroma Installer for main rom including choice of 3 kernels and ROM2SD and DATA2sd support
CM11 kernel built from CM11 source by lj50036
Remixed _thatv8 kernel with CM11 ramdisk - repacked by sbdags
Remixed Grimlock kernel with CM11 ramdisk - by hardslog
Remixed Geass kernel with CM11 ramdisk - repacked by sbdags - experimental
DPI Size: 160 (TF300 recommended stock fonts), 148 (Small fonts), 132 (Tiny fonts)
Launchers: Trebuchet, Google Experience Launcher, Apex , Nova
Boot Animations: CM Circle of Fire, CM Color Circle, Nexus Phase Beam, Cyanogen Stock
Gapps (updated by sbdags to Google latest apks and libs) flashed from separate package
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, DropBox, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support!, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
[*]Tip 2: In Dev Settings, enable advanced reboot & change window animation,
transition animation & animator scales down to 0.2x for extra snappiness
Change Log
cm-11.0-20140930-crombi-kk-R1-tf300t Kitkat 4.4.4rc2 source by lj50036
20140930 changes
- release 1!
- rebuilt from latest cm11 4.4.4r2 kitkat - crombi-kk source - maintained by lj50036!
- added aroma install options to auto select/install options; sbdags best, stock cm11, previous saved....
- sbdags = internal only + apex + _that kernel + 213hdpi/160mdpi + fastest tweaks + useful apps + f2fs or etx4
- cm11 = internal only + stock cm11 apps & kernel + no tweaks + gapps + f2fs or etx4
- added _that kernel version 11
- updated cm11 kernel to latest version with f2fs fixes from lj50036 & _that
- removed selinux support as causing issues
- removed discard mount option as f2fs and our kernels don't support it
- removed cm11 backup and restore scripts as causing more harm than good with bundled apps
- fixed bt issue not turning on without a reboot -thanks hardslog
- added better zipalign binary
- added different set of vm tweaks - thanks to katkiss roms
- added additional tegra core cap & 3d scaling tweaks - thanks _that
- improved waking up from sleep
- fixed wake from keyboard - thanks jonoathome
- added auto detect file system type to aroma - thanks archidroid
- added cromix tf701 theme to installer
- updated dolphin browser to version 11.2.3
- updated google tts to 3.2.12
- updated google music to version 5.6.1523p
- updated google chrome to version 37.0.2062.117
- updated google mail to version 4.9
- updated google search to version 3.6.14.1337016
- updated google talkback to version 3.5.2
- updated google play store to version 4.9.13
- updated google core services to version 5.0.89
- updated youtube to version 5.10.1.5
- updated apex launcher to version 2.6.0
- updated adaway to version 2.9.1
- updated gravitybox to verison 3.4.3
- note : Google hangouts cannot be updated to latest version due to google breaking apps packages with incompatible shared libraries. Going forward it will be a store app only
20140906 changes
- Rebuilt from latest CM11 4.4.4rc2 Kitkat - CROMBi-kk source - maintained by lj50036!
- Merged rom from 2 sources to introduce universal installer for 4 devices
- Updated device ID for TF201 which should fix wifi issues
- Updated options with TF700 and ME301, kernels + Device IDs!
- Dynamic fsync properly enabled on Grimlock kernel when fsync disabled selected in installer
- Made Google Calendar install by default as too many apps rely on it
- Updated Google Chrome to version 36.0.1985.135
- Updated Google Maps to version 8.3.1
- Updated Google Search to version 3.6.14
- Updated YouTube to version 5.9.0.13
- Updated ESFileExplorer to version 3.2.0
- Removed DropBox as bloatware (30MB!) - still available on the Play Store
- Removed Google Plus as bloatware (33MB!) - still available on the Play Store
- Removed alternate stock browser as no longer required
- Set default options to sbdags recommended for best performance
20140811 changes
- ROM is now Release Candidate 2! RC1 cleared private testing.
- ROM Version is CROMBi-kk_RC2 KitKat-4.4.4rc2-CM11-DEODEX
- Added my Intergalactic Ultra Touch (TM) settings to ROM Super snappy now
- Updated the Grimlock CM11 kernel to version 2 - thanks hardslog
- Changed the dalvik vm optimisation to reduce heap closer to stock as I think Garbage Collection wasn't happening frequently enough and when it did it took too long
- WiFi scan interval reset to 180
- Changed Zip Align script to a more recent version and added SQL Lite tweaks
- Can't see benefit of B2R script so default is off now
- Browsers now have their own section in installer
- Dolphin Browser with Adobe Flash both moved to system apps
- Tidied up gapps package from PA Gapps
- Updated Google Music to version 5.6.1617P
- Updated Google Maps to version 8.2.0
- Updated Google Hangouts to version 2.1.317
- Updated Google Chrome to version 36.0.1985.131
- Updated Google Core Services to version 5.0.89
- Updated Apex Launcher to Version 2.5.0
- Updated ESFileExplorer to version 3.1.9.1
- Updated GravityBox to 3.2.5
- Removed phab7 from xposed modules (no longer works on 4.4.x)
- Removed betterbean theme
- Added Android-L theme and Light / Dark variants
20140716 changes
- Rebuilt from CM11 4.4.4 Kitkat - CROMBi-kk source - maintained by lj50036!
- Fixed the settings - staus crashing
- Fixed the screen not shutting off when closing the lid when docked - thanks psudeke!
- Lowered GPU values for TF201 users which should stop tearing and glitches
- Doubled the fling values for extra screen responsiveness
- Updated permissions to 4.4.4 CM11 set in updater script
- Repacked latest CM11 kernel with init10 functionality for ROM2SD/DATA2Sd and F2FS support
- Added latest Grimlock CM11 kernel v1.0 for the TF300 - thanks Hardslog
- Added Google Chrome as an option to install to /system/app
- Added option to remove the Stock Browser from /system/app
- Added Viper4Android Music FX as an option to replace CM DSP Manager
- Rom has SuperUser enabled by default now
- More virtual machine dalvik tweaks to speed things up
- Updated Apex Launcher to version 2.4.1
- Updated YouTube to version 5.7.41
- Updated Google Maps to version 8.1.1
- Updated Google Plus to version 4.4.3.69327528
- Updated Google Search to version 3.5.16
- Updated Google Music to version 5.6.1609P
- Updated Google Hangouts to version 2.1.311
- Updated Google Core Services to version 5.0.84
- Updated DropBox to version 2.4.2
- Updated Apex Launcher to version 2.4.0
- Updated Nova Launcher to version 3.0.1
- Updated Gravity Box to version 3.2.4
- Updated ESFileExplorer to version 3.1.8
- Beta - Tweaked Touchscreen sensitvity to the max for a very responsive experience
20140512 changes
- Rebased off latest CM11 source
- Kernel installer algorithm cleaned up to allow rom2sd, data2sd and f2fs selection management
- Compiled static busybox for /system/boot which fixes preinit issues for data2sd and rom2sd - thanks _that for your help
- Fixed f2fs on internal and external not working with data2sd (bug in fstab and installer)
- More fixes to f2fs installer routines and preinit scripts - added combinations of ext4 and f2fs
- Fixed _that wifi and bluetooth module compatibilty problems with _that kernel
- Changed the init mount point for f2fs to use the discard option on internal data only
- Cleaned up installer script
- ROM2SD and DATA2SD now working with normal CROMBi-kk on internal!
- Updated grimlock kernel to 2.4 for both TF300 and TF201 - thanks hardslog
- Updated ME301 compatibility packs included OC from hardslog
- Updated 2 new animations (red and blue) from psudeke
- Updated Google Calendar to version 201404014
- Updated Google Core Services to latest version
- Updated Google Plus to version 4.3.1.63038142
- Updated Google TTS to version 3.0.11
- Updated Hangouts to version 2.1.0
- Updated ESFileExplorer to version 3.1.3
- Updated DropBox to version 2.4.1
- Updated Dolphin Browser to verison 10.3.1
- Updated Google Maps to version 8.0.0
- Updated Google Search / Now to version 3.4.16.1149292
- Updated YouTube to version 5.6.36
- Updated Apex Launcher to version 2.3.3
- Updated Titanium Backup to version 6.1.5.5
- Updated Xposed Framework to version 2.5.1
- Updated Gravity Box to version 3.1.0
- Updated Google Music to version 5.5.15110.1148372
- Added inverted blue CM Theme as it's rather pretty
20140318 changes
- Fixed CM11 kernel not installing correctly from Aroma
- Removed TeleServices.apk to stop fc on boot in com.android.phone
20140317 changes
- Rebuilt from new base from lj50036 - Includes dock fixes (java) from CM11 source
- Fixed com.android.phone force close issues
- Fixed Grimlock kernel installing incorrect modules
- Fixed _thatv8 kernel with updated init and init.cardhu.cpu.rc for better cpu mode support - thanks ebildude123
- Fixed installer so hopefully users won't have an issue with addon.d scripts
- Fixed the CM11 backup and restore scripts not running as ro.cm.version was missing CM11
- Fixed : ROM2SD now correctly maps internal partitions to /datai, /systemi and /storage/sdcardi
-----ROM2SD still only works with a 4.2 JB ROM on internal
- Fixed : DATA2SD now offered again - currently uses _that v8 kernel
- Terminal Emulator lib file only installed when option is chosen in installer
- Added NTFS and extFAT support to stock based kernels
- Added Dolphin Browser and JetPack with FlashPlayer in installer as this is the only way to use flash in KitKat right now
- Updated Stock Browser Icon to Asus 4.3 version
- Updated Nova Launcher to version 2.3
20140315 changes
- Rebuilt from new base from lj50036 - Includes dock fixes (java) from CM11 source
- Repacked _thatv8 kernel with updated init and init.cardhu.cpu.rc for better cpu mode support
- Repacked Hunds 3.4.5 kernel with LetMeKnow's Extreme Tweaks
- Fixed installer so hopefully users won't have an issue with addon.d scripts
- Fixed the CM11 backup and restore scripts not running as ro.cm.version was missing CM11
- Fixed : ROM2SD now correctly maps internal partitions to /datai, /systemi and /storage/sdcardi
-----ROM2SD still only works with a 4.2 JB ROM on internal
- Fixed : DATA2SD now offered again - currently uses _that v8 kernel
- Terminal Emulator lib file only installed when option is chosen in installer
- Added NTFS and extFAT support to stock based kernels
- Added Dolphin Browser and JetPack with FlashPlayer in installer as this is the only way to use flash in KitKat right now
- Updated Stock Browser Icon to Asus 4.3 version
- Updated Nova Launcher to version 2.3
- 20140315 GApps Package updated. See post 2 for changelog
20140314 changes
- Updated Adobe Flash version to hacked version to test with 4.4
- Updated Adaway to version 2.8.1
- Updated Terminal Emulator to version 1.0.58
- Build.prop edit to increase scroll sensitivity
ro.min.fling_velocity=30000
ro.max.fling_velocity=60000
20140312 changes
GApps Package updated. See post 2 for changelog
20140309 changes
- lj50036 has rebased the Rom from CM11 source. No more CMB reliance
- Repacked all 3 kernels so up to date with CM11 changes
- Added Cyanogen Stock Bootanimation as option
- Inverted calendar removed and replaced with stock Google one
- Split GPU rendering into 2 parts - Need to test differences:
Part 1 forces GPU Rendering for 2D operations in the build.prop
Part 2 forces software rendering to be disabled thus the GPU must be used
- Cleaned up updater-script as not using CM Backup / Restore functionality for now
- Added tweaked Browser.apk back in as well as media codecs and lib file for Terminal Emulator
20140308 changes
- Fixed Aroma script error meaning 95CleanTweaks not being given correct permissions to run as init.d
- Reset CPU profiles in the ramdisk so they mirror the ones we are used to from CROMi-X in terms of speed and fps limits
- That's kernel OCs to 1.8GHz with balanced at 1.5GHz and power saving at 1GHz
- lj50036's kernel OCs to 1.7GHz with balance at 1.5GHz and power saving at 1GHz
- Hunds's kernel OCs to 1.8GHz with balanced at 1.6GHz and power saving at 1.4GHz
- Attempted to fix issue with some users not being able to install to ROM2SD - but still broken if CROMBi-kk is on internal
- Updated media codecs from another CM11 build. Hopefully it'll fix dice and other video content
- Recompiled Browser.apk with speed tweaks as they got lost in a recent build
- If ROM2SD is chosen in installer then TWRP stays in ROM2SD mode until a reboot
- Gapps can be flashed to ROM2SD without needing the rom2sd1.zip if flashed straight after the rom installer
- Updated ES FIle Explorer to version 3.1.0.3
20140306 changes
- Updated GravityBox to version 2.9.8
- Final tidy up of ROM and scripts for release
20140305 changes
- Fixed the ROM2SD booting issues - thanks _that!
- New extract ramdisk script to solve the above
- Repacked the 2 CM11 kernels with thatv9 init binary which fixes empty last_kmsg issues
- Remixed Hunds 3.4.5 OC kernel with CM11 ramdisk - experimental not sure it works well
- Updated Titanium Backup to version 6.1.5.4
20140304 changes
- Added ROM2SD and DATA2SD scripting to installer
- Updated the stock CM11 kernel to include pre-init scripting - enables Data2sd & Rom2sd
- Updated Apex Launcher to version 2.30
- Removed CM11 _that kernel for now as wifi non functional due to missing modules during compilation
- Added script to upgrade build.prop from CROMBi-X to CROMBi-kk
20140303 changes
- Fixed Xposed not installing properly
- Added Asus _that kernel repacked with CM11 ramdisk and preinit compatibility
- Fixed missing modules from lj50036 & _that kernel
- Fixed Nexus Flow Bootanimation finishing too early
- Added phab7 as a test
- ROM name changed to CROMBi-kk
20140302 changes
- Built Aroma Script for main ROM installer
- Added new thatv8 kernel for CM11
- Updated dropbox to version 2.3.12.10
- Updated Terminal Emulator to version 1.0.57
20140301 changes
- Added Browser to RAM script
- Repacked Browser.apk with debug options on by default for speed - see labs options
- Added CleanTweaks init.d script from CROMi-X 5.4 as a test (need to analyse what is compatible)
- Build.Prop tweaks from CROMiX
Click to expand...
Click to collapse
Click to expand...
Click to collapse
The Team
sbdags - Creative Mastermind (From CROMi-X)
lj50036 - Source Guy (From CMB ROMS)
hardslog - The Canadian (From Grimlock ROMS)
Credits
Google, wow is all I can say!
CyanogenMod we wouldn't be doing this if if weren't for them (even if they are for profit now hah).
CMB for the basis of our Gapps package!
nycbjr (CMB ROMS team leader) Thx for all the time teaching me the way (lj50036)!!!!
_that For all the great advice!!!!!
To Do
Add Aroma to Gapps Package
Add Asus Apps as separate install
More Kernels and Tweaks
XDA:DevDB Information
CROMBi-kk, a ROM for the Asus Transformer TF300, ROM for the Asus Transformer TF300T
Contributors
lj50036, sbdags , hardslog, _that
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: V 10.6.1.27.x
Based On: CyanogenMod 11 AOSP
Version Information
Status: Snapshot
Current Beta Version: 20140906
Beta Release Date: 2014-03-18
Created 2014-03-19
Last Updated 2014-10-01
How to Upgrade and Downloads
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your TF300 following these instructions. CLICK ME
2. Install the omni version of Team Win Recovery Project (TWRP) Philz ClockWorkMod Recovery. Note this ROM will NOT install with older versions of recovery! CLICK ME
Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:
CWM:
Connect your transformer to your PC, reboot to the bootloader to enable fastboot by either holding down [power] and [volume down] or opening a command prompt in your adb.exe folder in windows:
Code:
adb reboot bootloader
To flash the recovery:
Code:
fastboot -i 0x0B05 flash recovery cwm.img
or
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds
Then reboot the tablet either back to the bootloader or to android to complete
Code:
fastboot -i 0x0B05 reboot-bootloader
fastboot -i 0x0B05 reboot
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen
Click to expand...
Click to collapse
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
CROMBi-kk ROM DOWNLOAD
Note: The first boot after install will take 10 mins whilst everything is built. Some people might think it is looping but it is not
CROMBi-kk Current Release Full Mirror 1
CROMBi-kk Current Release Full Mirror 2
CROMBi-kk Current Release Full Mirror 3
ALL FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ASUS APPS DOWNLOAD - Flash from Recovery : Compiled by kansasboy001
Asus Battery Widget, Asus Calculator, Asus Calendar, Asus Clock, Asus Dayscene Live Wallpaper, Asus Dictionary, Asus Email, Asus Gallery, Asus Keyboard, Asus Photo Story, Asus Sound Recorder, Asus Tasks, My Frame, My Water I & II, Asus Supernote Pro, Weather & Time Widget, Asus Framework, Asus Settings, Asus Audio (V4A), Asus Contacts, Asus File Manager(Root Browser), Asus Camera, Asus Browser
[THREAD][APPS] [ASUS Apps][ CROMBi-kk & ZOMBi-kk]
GOOGLE APPS (GAPPS) DOWNLOAD - NO LONGER NEEDED!
GAPPS NOW INCLUDED AS OPTIONS IN MAIN ROM ZIP
Change Log
crombi_kkgapps_20140315
Updated YouTube to version 5.5.27
Updated Google Maps to version 7.7.0
Updated Google Search and Libs to version 3.3.11
crombi_kkgapps_20140312
Updated Google Calendarsync adapter to latest version
Fixed the issue of GApps not flashing if not done directly after ROM
crombi_kkgapps_20140309
Updated Google Bookmarksync adapter to latest version
crombi_kkgapps_20140308
If Gapps is flashed after CROMBi-kk it should now in ROM2SD mode - no ROM2SD1.zip required
Updated Google TTS to version 3.0.10.1047791
crombi_kkgapps_20140306
Removed calendarprovider.apk from gapps as conflicted with calendar app in rom
crombi_kkgapps_20140301
Updated updater-script
Updated Google Plus to version 4.3.0.62241793
Updated Google Core Services and lib files to latest version
Updated Google Experience Launcher to version 1.0.9
crombi_kkgapps_20140223
Updated Gmail2 to version 4.7.2
Updated Hangouts and lib files to version 2.0.303
Updated Google Maps to version 7.6.1
Updated YouTube to version 5.3.32
Updated Google Now and lib files to version 3.2.17.1009776arm
Updated Play Store to version 4.5.10
Removed Google Calendar as a version is already provided in rom
ROM2SD INSTRUCTIONS PLEASE READ!
ROM2SD only works if you have CROMi-X, miniC flashed on internal. Just choose ROM2SD in the installer of CROMBi-kk to flash it to ROM2SD and the installer will do the rest.
ROM2SD USERS PLEASE CLICK HERE
- Install CROMBi-kk and choose ROM2SD install
- Flash ROM2SD1.zip No longer required
- Flash GAPPS Package No longer required
- Flash Wifi ROM2SD Patch
CROMBi-kk_TF300_Wifi_ROM2SD_Patch Download
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the CROMBi-kk zip file and follow the on screen prompts to customize your installation.
6. Choose the wifi patch and flash..
7. Reboot and enjoy.
SDCARD SETUP PLEASE CLICK HERE
Using GParted to setup a micro SD for ROM2SD support
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall CROMBi-kk but this time choose the ROM2SD option
TWRP
UNOFFICIAL TWRP [email protected]_V1.0
Contributors:
The Crombi Team ....
Credits:
TEAMWIN - Thx guys for all the help ...
_that - All the many hours and late nights....
Sources:
Device tree:
omni_android_device_asus_transformer-common
omni_android_device_asus_tf300t
Kernel:
grimlock_kernel_asus_tegra3_unified
CHANGELOG
- Made it possible to mount all 3 partitions on the external_sdcard from within TWRP ....
- Added 'reboot recovery' & 'reboot bootloader' as options in REBOOT
- These partitions will show up as ......
external_sdcard = User storage space, should be formatted vfat
external_data = Will become /data for ROM2SD or DATA2SD, can be formatted either EXT4 or f2fs both can now be done from within TWRP ...
external_system = Will become /system for ROM2SD, should be formatted EXT4 can also be done from with in TWRP ....
This should make it very nice to make backups and restore without the need for the rom2sd1.zip or the data2sd.zip ......
Click to expand...
Click to collapse
BLOB DOWNLOAD MIRRORS
UNOFFICIAL TWRP MIRROR 1
- md5 d4effaf97a51674bac04c6ccbf4fd892
[SIZE=+3]The Q&A thread has been created for Questions & Answers/Troubleshooting[/SIZE]
[SIZE=+3]Specific to
[Q&A]★★★[KitKat 4.4.2][CROMBi-kk][DATA2SD | ROM2SD | CM11 Base]★★★
Click link here>>[email protected] Forum<<Click link here[/SIZE]
Reserved!
(this space for rent! )
Donations
@spudsmac
@miduku
@robbie888
@lightiv
@Bigred007
@Waldo_
@emfanitek
@rlanza1054
@Unidave199
@Lock-N-Load
@Fear Knot
@lvrijn
@mitsublw
@scouzers
@zdebel
@jhr5474
@Eddie Hicks
@smchadwell
@dladz
@eRPeeX
@LocusofZen
@mikmock
Thx everyone that has donated, if you do not see your user name here and have donated, shoot me an PM and I will add you....
Thx Josh
BTW If you own an ME301T you can flash @hardslog's compatibility pack here to run this rom if you wish.
ME301T COMPATIBILITY THREAD
TF201
@sbdags
It is running great on this tf201
It was an easy change over, I think we should go live with it very soon....
There are just a few things I would like to talk over with you on irc, When you get time..
Thx Josh :good:
lj50036 said:
@sbdags
It is running great on this tf201
It was an easy change over, I think we should go live with it very soon....
There are just a few things I would like to talk over with you on irc, When you get time..
Thx Josh :good:
Click to expand...
Click to collapse
Good stuff! Off to work now but up later!
@sbdags
On the tf201.... The bluetooth does not seem to work on anything but grimlock kernel RC-2.2
Could this be a module issue??
lj50036 said:
@sbdags
On the tf201.... The bluetooth does not seem to work on anything but grimlock kernel RC-2.2
Could this be a module issue??
Click to expand...
Click to collapse
Possibly but I don't know why Maybe worth switching the TF201 back to the TF700 kernel base as it may be closer to that than the TF300?
Platform Manifest
@sbdags
CM on Sunday after our current release... Updated all their goggle repo's from 4.4.2r1 to 4.4.2r2
Our next base build will include these updates !!!!!!!!
With the new base, there will be a full changelog released with it aslo...
lj50036 said:
@sbdags
CM on Sunday after our current release... Updated all their goggle repo's from 4.4.2r1 to 4.4.2r2
Our next base build will include these updates !!!!!!!!
With the new base, there will be a full changelog released with it aslo...
Click to expand...
Click to collapse
Ah nicely done!! :good::good::good:
---------- Post added at 10:42 PM ---------- Previous post was at 09:55 PM ----------
BTW all the 20140323 release is up. See download tab and changelog below
Based off cm-4.4-20140322-crombikk4.4.2-tf300t source by lj50036
20140323 changes
- Rebuilt from new base from lj50036
---Fixed Wifi Location Services
- Updated _that cm kernel to v9
- Updated grimlock kernel to 2.2RC3
- Updated data2sd kernel to _that v9
- Updated CM11 kernel to latest version
- Changed the ROM2SD script so that it copies wifi and bluetooth modules from the internal ROM
- Added a new bootanimation by psudeke
- Tidied up Aroma to make it easier to merge new builds
- Updated ES File Explorer to version 3.1.1
- Updated Dolphin Browser to version 10.2.8
- Updated GravityBox to version 3.0.0 KitKat Edition
- GApps now included in main installer
- Updated PlayStore to version 4.6.17
- Removed ROM provided calendar.apk and googlecalendarsyncadapter.apk
- Added latest Google Calendar as an option
- Added latest Google Music as an option
I have to make a compliment for this rom.
This is the first time I can use XBMC full-hd tv-channels streaming. (I use argus-tv server to watch live tv through the house and different xbmc clients).
I never could play HD streams via wifi on android. Not even on my Note 2 which is much faster. But now with art and the new xbmc it's flying.
Awesome work bro! Ive been running it for a few hours and so far no issues at all. Quick question if you dont mind. Where do I find the dock keyboard layout? I need to change the internet shortcut into a minus as mine quit working some time ago. I was able to get to it under /system/user in the past but now there a ton of different controller layouts and I cant find the asus dock in there. I may have missed it though. Do you remember the vendor number for the layout file?
Thanks!
Sent from my TF300T using xda app-developers app
pyraxiate said:
Awesome work bro! Ive been running it for a few hours and so far no issues at all. Quick question if you dont mind. Where do I find the dock keyboard layout? I need to change the internet shortcut into a minus as mine quit working some time ago. I was able to get to it under /system/user in the past but now there a ton of different controller layouts and I cant find the asus dock in there. I may have missed it though. Do you remember the vendor number for the layout file?
Thanks!
Sent from my TF300T using xda app-developers app
Click to expand...
Click to collapse
I think it's the asusdec.kcm or .kl file you want
sbdags said:
I think it's the asusdec.kcm or .kl file you want
Click to expand...
Click to collapse
Do you know where its at within the file system? Thanks again
PS
Asusdec.kl is what I modified on your older cromi rom. I just cant seem to find it even using search in es file explorer.
Sent from my TF300T using xda app-developers app
This screenshot shows the location of all other key layouts. I believe this is where it resided in 4.2 as well but asusdec isnt here :/
Sent from my TF300T using xda app-developers app
Has anyone tried Art with this? Just wondering if it or Dalvik works better with this rom. Still setting up so I can't say yet.
wigginst said:
Has anyone tried Art with this? Just wondering if it or Dalvik works better with this rom. Still setting up so I can't say yet.
Click to expand...
Click to collapse
Art seems to work very well
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE ASUS STOCK JB 4.2.1 BOOTLOADER VERSION ENDING IN 27.1 or 27.5 AND TWRP 2.7+ OR CWM 6.5.0.0+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 15 minutes!
SCREENSHOTS
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 and F2FS Data partitions
Based off omni-5.1.1-20150508-zombi_tf300t-KANG source by lj50036/hardslog
Full Aroma Installer for main rom including choice of 4 kernels and ROM2SD/DATA2SD/F2FS support
Remixed _thatv11 kernel with OMNI ramdisk - repacked by sbdags
Grimlock kernel with OMNI ramdisk and _that init - by hardslog
DPI Size: 160 (TF300 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-POP, Android-L, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
Bug List
[*]No Floating windows yet
Change Log
20150728 ZOMBi-POP RC1 changes
- RELEASE CANDIDATE 1!
- Fixed the problem with ROM2SD and DATA2SD not working correctly on beta 4
- Added SuperUser and Secure Kernel as options to the installer (Turn these off for work wifi or watching sky go, etc)
- Added dock battery icon as an option to the installer under tweaks
- Fixed partitions not getting unmounted correctly for tuning during installation
- Fixed WiFi across the unified bases for TF700/TF300/TF201
- OmniSwitch now working - thanks hardslog
- Tidied up some installer messages
- Google play services updated to unified version for all devices
- Updated Google Maps to version 9.12.0
- Updated Google TTS to version 3.5.6
- Updated Google Calendar to version 5.2.2-98195638
- Updated YouTube to version 10.28.59
- Updated Apex Launcher to version 3.1.0
20150723 ZOMBi-POP Beta 4 changes
- Unified Aroma installer for TF700/TF300/TF201
- Rebased from omni-5.1.1-20150718-zombi_tf300t-KANG maintained by lj50036, hardslog, sbdags
- Merged source from omni-5.1.1-20150718-zombi_tf700t/tf201t-KANG maintained by lj50036, hardslog
- Updated all kernels and modules to the unified versions - thanks lj50036
- Added inverted kernel for TF201 users
- Aroma re-written to allow multi device selection and detection
- Additional tweaks added from TF701 Zombi-pop
- Amended SuperSU installer script to give correct permissions and install locations
- Reverted to latest Banks Gapps - means another wipe - sorry!
- Updated Google Calendar, Google Mail, Google Hangouts, YouTube, Google Search & Google Maps to latest versions
- Updated ESFile Explorer and Nova Launcher to latest versions
- Added flashable zip to enable dock battery - NOTE - this means you can't change the battery icon
20150119 ZOMBi-POP Beta 3 changes
- Rebased from omni-5.1.1-20150508-zombi_tf300t-KANG maintained by lj50036, hardslog
- Repacked Grimlock kernel for 5.1.1 (Grimlock lite is still using 5.0)
- Retweaked some File System and Virtual Memory parameters - focus on smoothness and battery
- Added Aroma code to remember previous selections as well as offer various installs
- sbdags best auto install, omni default auto install, previous options and previous auto install
- Viper4Android sound enhancer updated to lollipop version + updated the audio_effect.conf file
- Updated Google Play Store to version 5.5.8
- Updated Google Play Services to version 7.3.29
- Updated Google Search to version 4.5.13.19
- Updated Google Maps to version 9.8.1
- Updated Google Hangouts to version 3.2.91698097
- Updated Google Play Music to version 5.9.1854R
- Updated Google Calendar to version 5.2-91668080
- Updated ESFileExplorer to version 3.2.5.1
- Fixed swipe gestures on google keyboard
- Fix for Battery Drain on Google Play Services
- Removed Titanium Backup from the zip file
20150422 ZOMBi-POP 5.1 Beta 2 changes
- Rebased from omni-5.1.1-20150422-zombi_tf300t-KANG maintained by lj50036, hardslog
- New base is from OMNI 5.1.1 merged by lj50036
- Browser History is back again! Thanks lj50036 or Hardslog
- You can now choose to install, no GAPPS or minimal GAPPS (just playstore and syncs)
- Updated Google Maps to version 9.7.1
- Updated Google Search to version 4.4.11.16
- Updated Google Mail to verison 5.1.90765967
- Updated Google Calendar to version 5.2-90091543
- Updated Google Hangouts to version 3.1.89134953
- Updated Google Text-to-Speech to version 3.4.6.1819666
- Updated YouTube to version 10.14.56
- Updated ESFileExplorer to version 3.2.5
- Updated Android Terminal to version 1.0.70
- Updated Banks Gapps:
- Google Play Services 7.3.28 (1863718-438)
- Google Play Store 5.4.12
- fixed OC on Some TF201's running Grimlock-lite
20150330 ZOMBi-POP 5.1 Beta 1 changes
- Rebased from omni-5.1-20150330-zombi_tf300t-KANG maintained by lj50036 & harslog
- Adaptive brigtness fixed and values changed
- Browser speed tweaks incorporated into source
- OmniSwitch updates
- Settings changes to alarms and notification interruptions
- Updated Google Music to version 5.8.1836R
- Removed Titanium Launcher - as it needs to be installed form the store now
- Testing Aroma 3.00 scripts from Amarullz
- Repacked omni / _that kernel with preinit init binary
- Updated YouTube, Hangouts, Google Search, Calendar, Maps to latest 5.1 versions
- Updated Google Play Store and Services to 5.1 versions
- Updated Apex Launcher to version 3.0.3
- Recompiled Browser.apk with speed tweaks
- Moved tibu to system to try and fix install issues
- Shrunk all gapps by removing duplicate lib files from binaries
- Cleaned up gapps inconsistencies (sbdags)
20150218 ZOMBi-POP Beta 4 changes
- Rebased from omni-5.0.2-2015-02-19-zombi_tf300t-KANG source maintained by lj50036
- Show Optimizing app dialog on first boot
- Prevent copyNativeLib of package scanning to reduce booting time
- Keyguard: don't refresh ui when screen off which causes high power when screen off
- Prevent App Not Responding when broadcast receiver is killed
- lowmemorykiller: Fix high min-free values
- Removed my minfree init.d script to test new default values
- Changed the interactive governor tweaks to help battery life and heat
- min_sample_time from 40000 to 10000
- go_maxspeed_load from 90 to 98
- max_normal_freq from 1500000 to 1300000
- midrange_freq from 760000 to 1150000
- Updated SuperSU to version 2.46
- Updated Apex Launcher to 3.0.2
- Updated Google Maps to version 9.4.0
- Updated YouTube to version 10.05.6
20150212 ZOMBi-POP Beta 3 changes
- Rebased from omni-5.0.2-2015-02-11-zombi_tf300t-KANG source maintained by lj50036
- Updated Grimlock Kernels for exfat and ntfs support (hopefully!)
- New Kernel - Grimlock LITE - OC reduced to 1700mhz and voltage reduced for better battery/heat
- Rebuilt _that/omni kernel with oom patches and repacked ramdisk
- Reverted some vm and kernel tweaks which seems to have got performance back on track
- Reverted read_ahead_kb to 4096 as no benefit to 2048
- Fixed Tibu not installing correctly and updated to version 7.0.0.2
- Removed Chrome and Dolphin / Flash
- Rebuilt all GAPPS from latest PA GAPPS modular package Feb 2015
- Resized Nexus-Lollipop bootanimation
- Added the Unknown Pleasures bootanimation
- Aroma theme updated - thanks Shonkin for the bg picture
- Fixed Overclocking not working on data2sd with _that's kernel. You now get 4x1800 cores on data2sd
- CPU will use all 4 cores at 90% max load instead of 85% on basic cpu tweaks
- Fixed missing sdcardi on grimlock kernel
- Fixed init.d on Grimlock 5 kernel by repacking init.zombi.rc
- Fixed zipalign script so it runs properly once after a dirty or clean install
- Set the lowmemorykiller to less aggressive 2048,4096,8192,16384,24576,32768 via init.d script
- Rewrote Aroma installer which gets us a step closer to it remembering previous installs (but not yet!)
- Split out the extra tweaks into two parts for further debugging - Basic and Extended
- Spilt out Disable Software Rendering and Force GPU rendering for further testing
- Reordered init.d scripts to make more sense
- Updated Titanium Backup to version 7.0.0 and cleaned up installation script
- Force GPU Rendering is not getting applied correctly - do it manually for now
20150127 ZOMBi-POP Beta 2 changes
- Rebased from omni-5.0.2-20150127-zombi_tf300t-KANG source maintained by lj50036/hardslog
- Fixed Auto-rotation - thanks hardslog/lj50036!
- NEW Material AOSP Broswer - very nice!
- Omni Switch but no windows mode yet
- Fixed missing sdcardi folder for data2sd and rom2sd users
- Fixed the Apex and Nova Launchers getting missed up on install
- CLEANTweaks init.d re-balanced to be less aggressive - hopefully stops so many reboots
- Recompiled latest framework-res.apk with zombi-pop default_wallpaper.jpg
- Updated Google Chrome to version 40.0.2214.89
- Updated Google Maps to version 9.3.0
- Updated YouTube to version 10.02.3
- Updated Android Terminal Emulator to version 1.0.64
20150121 ZOMBi-POP Beta 1 changes
- Fixed Auto-rotation
- Added Linaro build of Grimlock Kernel (needs more testing)
- AOSP Browser: Materialize (green)
- First Release for TF300/TF201
20150119 ZOMBi-POP Pre-Release 3 changes
- New name - new logo! ZOMBi-POP
- Rethemed Aroma to new ZOMBi-POP theme
- Added 2 optional beta tweaks for testing (screen and kernel)
- Fixed _thatv11 kernel option
- Added Grimlock v5.0 (not tested)
20150118 Lollipop Pre-Release 2 changes
- Updated to latest OMNI Lollipop source omni-5.0.2-20150117-zombi_tf700t-KANG maintained by lj50036
- Fixed issue with AOSP Browser getting installed when not selected
- Fixed issue with Live Wallpapers getting installed when not selected
- Fixed issue with Launcher3 getting installed when not selected
- Fixed issue with Terminal not getting installed when selected
- Fixed issue with DSPManager still getting installed when Viper4fx is installed
- Removed stock calendar as google app one is far superior
- Fixed init.d scripts not running due to wrong permissions and wrong ramdisk init.rc call
20150117 Lollipop Pre-Release 1 changes
- Updated system and data apps to use new lollipop structures
- Updated all apps to latest versions
- Removed xposed as not compaitble with lollipop
- Tweaked the force gpu options
20150111 Lollipop Alpha 1 changes
- Updated to latest OMNI Lollipop source maintained by lj50036
- New PA GApps Lollipop version 2015
- Initial Beta test build to see what works and what doesn't
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk/ZOMBi-X ROMS)
@lj50036 - Source Guy (From CROMBi-kk/ZOMBI-X ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
@ikkeT- The Fin
Credits
Google
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : fatboyinlycra, berndblb, drewski_1, duckredbeard, keshavmot2, corb06, jmaybush, JoJoDaClown, kansasboy001, TrofeoSC
To Do
Fix loads of stuff!
XDA:DevDB Information
ZOMBi-POP, ROM for the Asus Transformer TF300T
Contributors
hardslog, lj50036, sbdags, _that
Source Code: https://github.com/zombi-x
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: JB Ending with 27.1 or 27.5 bootloader
Based On: OMNI AOSP
Version Information
Status: Stable
Current Stable Version: 20150728 RC1
Stable Release Date: 2015-07-28
Current Beta Version: 20150723 Beta 4
Beta Release Date: 2015-07-23
Created 2015-01-24
Last Updated 2015-07-27
Reserved
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your TF300 by following these instructions.
2. Install the latest version of Team Win Recovery Project (TWRP) 2.7+ Note this ROM will NOT install with older versions of recovery!
TWRP OFFICIAL DOWNLOADS
Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:
CWM:
Connect your transformer to your PC, reboot to the bootloader to enable fastboot by either holding down [power] and [volume down] or opening a command prompt in your adb.exe folder in windows:
Code:
adb reboot bootloader
To flash the recovery:
Code:
fastboot -i 0x0B05 flash recovery cwm.img
or
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds
Then reboot the tablet either back to the bootloader or to android to complete
Code:
fastboot -i 0x0B05 reboot-bootloader
fastboot -i 0x0B05 reboot
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen
Click to expand...
Click to collapse
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-POP ROM DOWNLOAD
Note: The first boot after install will take 15 mins whilst everything is built. Some people might think it is looping but it is not. The ROM also takes about 15 mins to stabilise after the first boot
ZOMBi-POP RC1 LP 5.1.1 Full Mirror 1
ZOMBi-POP RC1 LP 5.1.1 Full Mirror 2
MD5 sum: e3980e1bffa539e676ac1269268abcd1
Flash this patch please as there is a file missing that gives better performance
RC1 Performance Patch
Remember if you are on rom2sd you beed to flash rom2sd1.zip first and if on data2sd use data2sd1.zip first.
FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ROM2SD/DATA2SD USERS PLEASE READ!
ROM2SD only works if you have ZOMBI-POP, ZOMBi-X, CROMBi-kk, CROMi-X or miniC flashed on internal with a THATv10+ kernel. Just choose ROM2SD in the installer of ZOMBi-POP to flash it to ROM2SD and the installer will do the rest.
- Install ZOMBi-POP and choose ROM2SD or DATA2SD install
The ROM2SD1.zip below is only needed if you need to switch your recovery to between normal and rom2sd mode. For Example you want to backup or restore a rom2sd installation. Flash once to go rom2sd and flash again to go back to normal. A reboot always puts you back to normal. Thanks to _that!
ROM2SD1.zip Download Mirror 1
ROM2SD1.zip Download Mirror 2
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
The DATA2SD1.zip below is only needed if you need to switch your recovery to between normal and data2sd mode. For Example you want to backup or restore a data2sd installation. Flash once to go data2sd and flash again to go back to normal. A reboot always puts you back to normal.
DATA2SD1.zip Download Mirror 1
DATA2SD1.zip Download Mirror 2
MD5 Sum: 9d5e9e2fd32593f981624499b37924b2
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the ZOMBi-POP zip file and follow the on screen prompts to customize your installation.
6. Reboot and enjoy.
Using GParted to setup a micro SD for ROM2SD or DATA2SD!
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
Note for DATA2SD just do one partition in stead of 2
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android (not needed for data2sd)
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall ZOMBi-POP but this time choose the ROM2SD / DATA2SD option
Reserved
All,
The ROM is still in BETA and by flashing it you are helping the BETA Testing process
It may still have some bugs, spontaneously reboot, drain the battery faster or heat up a bit. The aim is to make it better and fix them.
If you find a bug and want to report it here please post a logcat (after it occurred) with a description of what you were doing at the time and the rough timing in the logcat to look at (these things get huge!).
You can also post a dmesg which is the kernel boot logs and can indicate issues with data corruption or hardware.
If you get a reboot then please post a last_kmsg from the /proc folder.
How to get a logcat
How to get useful logs
Thank you!!
Join us on IRC for a chat or if you have questions:
Freenode
zombi-x
There is no Q&A section for this rom as it is still in dev so you are ok to post your questions here!
One for me
MIRROR 1 & 2 are up for your flashing needs ..... :good:
Thx Josh & Team ZOMBI
Cannae reserve a post but this one will do
@lj50036
I know all the kinks haven't been worked out yet, but is dock battery icon in this version?
toolhas4degrees said:
@lj50036
I know all the kinks haven't been worked out yet, but is dock battery icon in this version?
Click to expand...
Click to collapse
No not yet, most of the dock keys are working, but no battery support as of yet....
Thx Josh
Could it be possible to enjoy this project with the transformer prime???
Thx un any case, great effort, great success team!
jacmat said:
Could it be possible to enjoy this project with the transformer prime???
Thx un any case, great effort, great success team!
Click to expand...
Click to collapse
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Click to expand...
Click to collapse
so good to hear that, thanks so much for your work Josh!
Good to know! It would be great if it could work on the ME301T also! Is the hardware that different?
Hi, this rom work on TF300TG ???
Thanks
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
Click to expand...
Click to collapse
Thanks! Flashed with grimlock 5.0 and it runs well, but I had issues with chrome browser lockups...
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
Click to expand...
Click to collapse
Thank you very much, Josh, you and your team bring to prime's owners a reason to smile
jlamaeli said:
so good to hear that, thanks so much for your work Josh!
Click to expand...
Click to collapse
You will see a thread when its ready... :good:
EV0LU710N said:
Good to know! It would be great if it could work on the ME301T also! Is the hardware that different?
Click to expand...
Click to collapse
There maybe a compatible pack but we will have to wait and see... :good:
medievalspawn said:
Hi, this rom work on TF300TG ???
Thanks
Click to expand...
Click to collapse
It should but you will lose 3G....
luismiguel1977 said:
Thanks! Flashed with grimlock 5.0 and it runs well, but I had issues with chrome browser lockups...
Click to expand...
Click to collapse
Logcat after the browser crashes .....
jacmat said:
Thank you very much, Josh, you and your team bring to prime's owners a reason to smile
Click to expand...
Click to collapse
Will have to wait and see.... :good:
Thx Josh
lj50036 said:
There maybe a compatible pack but we will have to wait and see... :good:
Click to expand...
Click to collapse
That would be fantastic, surely would make a bunch of people very happy, myself included!
By the way, if you need a beta tester or some help with the development, I would be very happy to help out! I have a tablet ready to test drive!
lj50036 said:
There maybe a compatible pack but we will have to wait and see... :good:
Click to expand...
Click to collapse
Thank you man, would be great! :good:
excellent, downloading now, can you recomend a good gapps package for the rom
thanks
matt_simpson said:
excellent, downloading now, can you recomend a good gapps package for the rom
thanks
Click to expand...
Click to collapse
It's built in as choices.
Android Open Source Project Nougat For Xperia M
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This rom is based on Android Nougat 7.1 source (android-7.1.1_r6)
I have only made changes that needed to support our device other then that it's pure AOSP. it has no custom features to provide you stock android experience.
Device-specific source code:
Device
Kernel
Vendor Blobs
Discussion thread -->
What's working:
So far i have tested:
RIL (Calls, SMS, Mobile Datal)
Dual sim on Xperia M dual
Display
Camera & Camcorder
Audio and video
Wifi
Bluetooth & Bluetooth Audio
OpenGL rendering
Sensors (accelerometer,compass,light,proximity)
Sdcard
Auto brightness
Notification led
Storage
GPS
Mtp/ptp working same as 6.0
NFC
Note:
It's entirely possible that features not used by me (nor the people I've asked to test) are broken, but overall the device should be usable. You have been warned.
This is BETA so don't treat this as stable version.
AOSP is only for 4.3 baseband. If you are on 4.1/4.2 baseband/firmware then Follow this instruction
TWRP FOTA recovery is recommended for installing aosp, follow this thread for instructions
Download:
BETA 5: https://www.mediafire.com/?ltwb5qgqd22ckfi
For dual sim users: Flash this patch get dual sim working https://www.mediafire.com/?aag77t1w7bi7gg0
Install instructions:
Before you install make sure you are on 4.3 firmware 1st with your bootloader is Unlocked and a TWRP recovery installed. if you haven't installed recovery then flash boot.img from this rom zip via fastboot.
boot into recovery
Wipe data and cache
Flash the rom and gapps zip
Reboot
Upgrading from earlier version:
Boot into Recovery
Flash the rom and gapps zip
Reboot
Reporting bugs:
Before Reporting bugs make sure you
Read "note" section
Using stock kernel
Not installed any mods/tweaks - if you have installed mods like xposed you can't report bug
Not modified system files
Checked the posts below for a solution / fix
Read the last 10 pages of this thread for a post with a similar problem
Backup, reflash with a full wipe (do this if mods like xposed is installed) and check if the bug is still there
provide logcat,kmsg. if you reporting radio problem then provide radio log.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
All developers who is working on sony
Code Aurora Forum
CyanogenMod
XDA:DevDB Information
AOSP Nougat for Xperia M, ROM for the Sony Xperia M
Contributors
PecanCM
Source Code: https://android.googlesource.com/
ROM OS Version: 7.x Nougat
ROM Firmware Required: Stock 4.3 Firmware
Version Information
Status: Beta
Created 2016-08-26
Last Updated 2016-12-21
Changelog
BETA 5 21-12-2016
Updated Platform sources to android-7.1.1_r6(NMF26Q)
Fixed clock app world button force close
Fixed more sepolicy denials
Linux Security fixes
Added missing STK to build
Switched to nougat aosp audio hal
Switched to new xml audio policy configuration
Misc cleanup/fixes/updates
BETA 4 20-11-2016
Updated Platform source to android-7.1.0_r7(NDE63X)
Fixed Video recording "jumping"
Fixed invalid number error
Fixed gapps setup wizard force close
Linux Security fixes
Switched to source built NFC firmware
Updated apn conf from bullhead
Updated adreno renderscript blobs from msm8909 nougat
Misc cleanup/fixes
BETA 3 26-10-2016
Updated Platform source to android-7.1.0_r4(NDE63P)
Attempt to fix RIL with SuperSU on dual sim devices
Linux security fixes
Audio HAL updates from nougat branch
Time service updates
Update other blobs
Misc cleanup/fixes
BETA 2 21-10-2016
Updated Platform source to android-7.0.0_r7(NRD91D)
Security fixes
Time service fixes
Added support for more webviews
BETA 1 19-09-2016
Fixed camcorder
Fixed headset button
Attempt to fix network mode selection on dual sim
ALPHA 3 10-09-2016
Updated Platform sources to android-7.0.0_r4(NRD90S)
Dual sim is now supported
Fixed almost all selinux denials
Fixed FOTA recovery
Fixed Boot led
Security fixes
Added backlight and battery percentage support to offline charging
Updated widevine blobs for Nougat
- apps like netflix/google movies will work now
Updated time-service blobs
Updated camera related blobs
- no more text relocation
Update Power menu
- Added reboot option
- Added airplane mode
- Added ringer modes
ALPHA 2 29-08-2016
Fixed lots of Selinux denials
Fixed stock music app force close
Updated twrp recovery to latest version
Fixed qcril logging (no more diag spam in logcat)
Updated media codec from caf
Security fixes
ALPHA 1 26-08-2016
Initial release
FAQ
Q: Why no root access?
A: This is AOSP rom, not CyanogenMod.
Q: I can't find external sdcard in /ext_card, Why ?
A: Go to /storage you can find there
Q: Where is old browser ?
A: Removed from nougat and replaced with simple shell browser, Use 3rd party browser for all features.
Q: I can't find live wallpapers ?
A: Removed from nougat.
Thank you @PecanCM.
You are really fast. :highfive::highfive:
Yay! FINALLY! We love you Ron
Review: Processing...
Awesome @PecanCM!
Thanks for bringing AOSP Nougat 7.0 to xm!
Smooth and functional for an alpha release!
Thank you!! Gonna test it now!
Thanks for new taste of Android!
Tips:
- Launching persistent TWRP not supported. Only built-in 2.8
So if you have adopted sdcard you can't restore backup.
To fix flash CM13 kernel.
- OpenGapps for 7.0 here
- Feature spotlights here
- File manager in Settings > Storage finally can install APK's, useful for first boot.
- To use 2 apps at same time hold and drag thumbnail in Recents
- Double-tap on Recents works like Alt+Tab (like long press in CM)
- In dev options new option to force move all apps on adopted storage
Bonoboo said:
- Launching persistent TWRP not supported. Only built-in 2.8
So if you have adopted sdcard you can't restore backup.
To fix flash CM13 kernel.
Click to expand...
Click to collapse
FOTA TWRP (recent, most likely 3.0 only) is known & fixed,
logo loops on and on, nothing opening right?
Thanks for confirming.
Thanks a lot, Ron!
GPS is works (tested in Google Maps)
Adrian DC said:
FOTA TWRP (recent, most likely 3.0 only) is known & fixed,
logo loops on and on, nothing opening right?
Click to expand...
Click to collapse
I hadn't adopted sdcard, sorry.
Just noticed old TWRP and therefore possible problem.
Bonoboo said:
Thanks for new taste of Android!
Tips:
- Launching persistent TWRP not supported. Only built-in 2.8
So if you have adopted sdcard you can't restore backup.
To fix flash CM13 kernel.
- OpenGapps for 7.0 here
- Feature spotlights here
- File manager in Settings > Storage finally can install APK's, useful for first boot.
- To use 2 apps at same time hold and drag thumbnail in Recents
- Double-tap on Recents works like Alt+Tab (like long press in CM)
- In dev options new option to force move all apps on adopted storage
Click to expand...
Click to collapse
can you please share cm13 kernel?
Look likes our XM always infront of the other ..
Tried!
Everything's working fine, except:
1. Camera not working.
2. No live wallpapers.
3. Music app crashing every time.
Does anyone have success flashing GApps? On Opengapps wiki is stated that it needs additional ROM patching to disable APK Signature Scheme V2.
---------- Post added at 22:47 ---------- Previous post was at 22:44 ----------
BTW, if FOTA recovery is not working, I can repack the boot image with the latest TWRP 3.0.2-1.
cucumber09 said:
Does anyone have success flashing GApps. On Opengapps wiki is stated that it needs additional ROM patching to disable APK Signature Scheme V2.
---------- Post added at 22:47 ---------- Previous post was at 22:44 ----------
BTW, if FOTA recovery is not working, I can repack the boot image with the latest TWRP 3.0.2-1.
Click to expand...
Click to collapse
i installed GApps, but with error like "command 'log' doesn't exist"
App work fine, but Google Play Services is crashes when i trying add Google account.
And when im rebooting to recovery via terminal, its entered to twrp 2.8 (from this rom) not to fota sadly.
Is it based on 3.4 kernel?
verma.arun833 said:
Is it based on 3.4 kernel?
Click to expand...
Click to collapse
Yes, like all ROMs for our device (and maybe for our entire SoC family).
Can any user test WiFi hopspot for me. And also if pokemon go will work without bugs (sorry I have no time to DL and test myself ATM)
So here are results of my brief testing:
- It booted VERY FAST as there is no ART cache compilation after every update, cache is generated on-the-fly combining JIT and AOT compilation. BTW, not only first boot was fast but the latter ones too, much faster than CM13.
- First boot with Opengapps Pico for 08.26 led to Setup Master's FCs at some moments, yet after some painful experience I've succeed adding Google account and even restoring my apps and settings, which was quite surprising (I was amazed when noticed my ringtone being restored to that from CM13).
- 3G is not working, at least for me. Only EDGE.
- Getting root with the current version of SuperSU appears to be impossible, at least for our device.
- Phone seems to be less responsive, but maybe that's just me, because I regularly use it overclocked to 1.4 GHz.
- TWRP 2.8.0.0 and not working FOTA recovery, seriously? I was forced to repack boot image with the TWRP 3 (just quickly grabbed that from NUI as I'm lazy to repack recovery ramdisk for using in boot image). Some report it working but for me it always booted to the built-in TWRP, both by Vol- and Vol+. BTW, I can upload repacked boot image tomorrow (it is on my personal laptop, I'm writing this from my work one).
I would certainly use it as daily driver if there were root and NUI kernel available. It is very stable for such an early alpha (gosh, Ron started working on it a couple days ago as sources were published) and such an old phone (it debuted 3 years ago), we are very lucky to have so custom-friendly hardware and such a talented developers as Ron and guys working on msm8960 board (another reason I think is that there were no any bringing-pain-in-the-ass changes like ART in 4.4/5.0 and adoptable storage in 6.0). Great work, PecanCM!
I'll continue my testing tomorrow and revert to CM13 later until new SuperSU and NUI are released (or maybe forever if I'll buy new device soon).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Optimized LineageOS 14.1 for the Samsung Galaxy S4 (Qualcomm variants)
Brought to you by the Jflte DevConnection Team
Code:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
JDCTeam
Diego Monaco - @alucard_24
Dimitris Katikaridis - @side
Franck Rohée - @franzyroy
Ray Daley - @gadget!
Jim Silverlock - @Jimsilver73
Marco Zanin - @-+BB+-
Matthew Booth - @MattBooth
Mattia D'Alleva - @AntaresOne
Mike Atkins - @FernBch
Oliver - @angelcalibur
Paul Harris - @hawkerpaul
Paul Keith - @javelinanddart
Simeon Ivanov - @smstiv
Stefano Meroni - @smeroni68
Yannis Menexes - @SkL*
FEATURES
Faster than a rocket!
Based on LineageOS 14.1 - Android 7.1 Nougat
F2FS support
Improved speed, stability, RAM usage & battery drain
LEDify by JDCTeam - choose your favorite notification LED pattern at device's boot!
Toolbox by JDCTeam - the all-in-one device manager
Powered by Alucard kernel
All Galaxy S4 variants with Qualcomm Snapdragon 600 are supported:
GT-I9505
GT-I9505G
GT-I9507
GT-I9508
SCH-I545
SCH-R970
SGH-I337
SGH-M919
SPH-L720
SGH-S970G
SM-S975L
Many, many more! Install and see yourself!
All Variants with a locked bootloader are currently unavailable until the unified tree is further updated.
GT-I9515 is not supported (slighty different hardware)
GT-I9500 is not supported (completely different hardware)
AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL bootloader.
VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK bootloader.
Do 'getprop ro.bootloader' in Terminal Emulator or through ADB shell to find out which bootloader you have.
DOWNLOAD
Optimized-LineageOS-14.1 at AndroidFileHost: [HERE]
Official TWRP Recovery v3.1.0-0 for jfltexx: [HERE]
INSTALLATION
If you are coming from any previous Optimized LineageOS 13/14 version or any other ROM, please do a clean install!
FULL WIPE (with external microsd card)
Move any files you want to keep to your External MicroSD Card – ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the external microsd storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
FULL WIPE (without external microsd card with NO Home PC access)
Move any files you want to keep to a safe folder - ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the internal storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
FULL WIPE (without external microsd card with Home PC access)
Move any files you want to keep to your Home PC - ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the internal storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
Once first boot is completed you can safely move your files back onto your Internal Storage
NOTICE: First boot after an install/update takes a while, wait at least 5 minutes for it to boot.
If the LED stops flashing and goes solid with any color then SuperSU did not correctly trigger the reboot.. You can either pull the battery -OR- hold down the power button for 15 seconds till the led/screen goes blank, then let go of the power button.. Then after another 4 seconds it will automatically boot and vibrate and everything is 100% normal.. It only happens that one time on a new Rom install with SuperSU.-----------------------------------------------------------------------------------------------------------------------------------------------
AROMA-BOOTANIMATION -- By Creeper36
(Does Not Contain the Rom)
This is an Aroma installer if you want to change your BootAnimations.
This is a completely seperate and optional Aroma from the Rom installer.
I created this to give you the option of easily changing your BootAnimations.
Take a look at the Previews below and I will be creating more of these and will continue to update it.
ANIMATION PREVIEWS:
(Note: Quality may be reduced for Preview GIFs.. Final version is flawless)
ZOMBIE
OPT LINEAGE
OREO
PIXEL WHITE
PIXEL BLACK
BIOS
S ENERGY
BLUE STREAKS
HEART
WATCH DOGS
New Aroma-BootAnimations-v.1.0 >> https://www.androidfilehost.com/?w=files&flid=178732
-----------------------------------------------------------------------------------------------------------------------------------------------
SOURCES
Available on:
JDCTeam GitHub
CREDITS
Side - Lead developer
JDCTeam
LineageOS
OpenGApps
SPECIAL THANKS
Optimized-LineageOS-14.1 Test Team
Donators
AndroidFileHost
All of you!
XDA:DevDB Information
Android 7.1.2 | Optimized LineageOS 14.1 builds, ROM for the Samsung Galaxy S4
Contributors
side, creeper36, smeroni68, alucard_24, -+BB+-, MattBooth, hawkerpaul, angelcalibur, Jimsilver73, javelinanddart, franzyroy,SkL*, smstiv, FernBch
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2016-10-13
Last Updated 2019-01-20
Update is out
Version 11
20180320 / (20-Mar-2018)
MD5 for aroma build - a71b6dc9f08064ceb067f7f3363dac3d
MD5 for non-aroma build - c92a40be0de17975999df738e276b948
Changelog
Upstream merge until 19-March-2018
Update stock kernel to 19-March-2018
Updated Alucard kernel and Ramdisk
Reset Alucard kernel to version 8 source
Update security patch to March
BT edits
Google Apps related edit from upstream
Aroma: Do not delete Stock Dialer if Google Dialer is selected
Update magisk
Update mixplorer
Introduce Spectrum implementation
Fix the proximity sensor (That time for real
Resize user data partition to allow crypto work
Update our wallpaper
Update stock kernel
Update aosp and Snap camera
Update our flashables
old changelogs:
Version 10
20171020 / (20-Mar-2018)
Upstream merge until 3-Jan-2018
Update stock kernel to 3-Jan-2018
Updated Alucard kernel and Ramdisk
Minor edits here and there and some clean up
Version 10 wallpaper
Speed up some things around, like animations
Implement SideCore kernel to aroma
Update Stock camera
Update our flashables
Version 9
20171020 / (20-Oct-2017)
MD5 for aroma build - 37e9b19dc975aa5263ed3d47b19d228d
MD5 for non-aroma build - 6b39a9de65cef4395cbb4ce04af4fd64
Upstream merge until 12-Dec-2017
Update stock kernel to 12-Dec-2017
Updated Alucard kernel and Ramdisk
Update to _r36 revision
Minor edits here and there and some clean up
Update mixplorer app
Add runtime themer (Settings->Display->Theme
Version9 wallpaper
propush the dex even more
Add 4G/LTE switch at tweaks section
SystemUI:Set recents taskbar delay to 0
config:Enable lockscreen rotation(Display/Rotation
Version 8
20171020 / (20-Oct-2017)
MD5 for aroma build - ff5bad8283fc608c7f324b15b8bfaffd
MD5 for non-aroma build - 94d11e511f8a3f0abc8054a6af74bbfe
Update stock kernel to 19-Oct-2017
Updated kernel
Fix a known BlueTooth bug
October security patches
Updated ramdisk
Completely resize partitions
Update aroma packages
Stable 8 wallpaper
Update our flashables
Add burnIn option
BT Audio edits from upstream
Add CMSettings package to power_off_alarm_apps
Enable variable button brightness
aroma:Add SamsungOne fonts
aroma:Add Pixel2 Contacts/Dialer/Messages
Please READ THE DESCRIPTION AT AROMA
Version 7b
20170916 / (16/17-September-2017)
MD5 for aroma build - 25c0d82a9cc8d504df0f0b94fe05d1af
MD5 for non-aroma build - 01e4c8e3a7f01efea943e37601c07d93
Upstream merge until 16-Sep-2017
Update stock kernel to 16-Sep-2017
September security patches
Updated Ramdisk
20170906 / (6-September-2017)
MD5 for aroma build - 8873d4ec9ee4a63954ad69dd3fead255
MD5 for non-aroma build - 8245c1281cb0c6146106cbae976b3418
Changelog:
Upstream merge until 6-Sep-2017
Update stock kernel to 6-Sep-2017
Version 7 wallpaper
Updated Alucard kernel
Updated Linaro ToolChain for Alucard
init:Sprint edits from LineageOS
Fix BT audio stream for car sets and headsets
Overlay:Set config_deviceHardwareKeys to 83
Revert "Overlays: capacitive keys: light up only when pressed."
Update Pixel Launcher to rootless 2.1
Allow to ignore presentation indicator of outgoing calls
GPS:Set XTRA version check to AUTO
Update mixplorer.apk 24/08/2017
Revert "system.prop:debug.hwui.use_buffer_age=false"
prop:Boost dex2oat process
Build bionic with O3 flags
Updated webview
20170816 / (16-August-2017)
MD5 for aroma build - dbbe359729941cd5f3b38501b0bec59a
MD5 for non-aroma build - e4c886ff43cfcdecaf548b7c6b0b1ef8
Changelog:
Upstream merge until 15-August-2017
Update stock kernel to 15-August-2017
Stable 6 wallpaper
Update to _r29
PhoneToggler: Update preferred network mode setting
Update Alucard kernel
More Sprint variant edits on signal
Build Alucard with 7.1.1 Linaro TC
device:capacitive keys: light up only when pressed
device:animate screen lights
Doze: Use pure Samsungs app
Pin camera app in memory for faster executions
Allow GMS power saving
Hack to make YouTube 4K videos work
aroma:Update Magisk to 13.3
Enable "Panic Detection" mode
Aroma:Fix an unexpected format on removing option
ramdisk-tweaks/cortexbrain:make script less aggresive
Kernel: Default profile:Enable power_efficiency_workqueue
All profiles:Slightly reduce voltages
default/battery/exbattery profiles:Set maxcoreslimit_sleep=1
APNs:Add freedomLTE
Bluetooth:Fix car audio (?)
Pure CAF Gallery
Update our flashables
More SafetyNet patches
Reduce DEFAULT_MIN_BOOST_FREQ at alucard kernel
debug.hwui.use_buffer_age=false Affects display updates
Fix a Sprint connections property overwrite
Speed up PlayStore installations
Enable GLONASS (?)
Add some stock system prop flags
HDR workaround.Works?i see no difference
Modify 480p profile
20170711 / (11-July-2017)
MD5 for aroma build - dbbe359729941cd5f3b38501b0bec59a
MD5 for non-aroma build - e4c886ff43cfcdecaf548b7c6b0b1ef8
Upstream merge until 9-July-2017
Update stock kernel to 9-July-2017
Update to revision 24
SuperSU to 2.82
Core edits from upstream
Ramdisk edits
art: switch to -O3 completely
Kernel optimized ToolChain edits
default.prop:Enable MTP by default
Update alucard kernel
Custom scrolling values at OptCM Settings
Add more sensitive apns
Remove decay time hack
Update Magisk
Updated wallpaper
CarrierConfig overlay.affects data connections
Even more bt edits
Switch to chromium patched webview
Update aroma packages
Update flashables from optcm settings
bdroid_buildcfg:enable BTM_WBS_INCLUDED
bluetooth:vnd_jf: Do not set SCO_WBS_SAMPLE_RATE
Changelog:
20170605 / (07-June-2017)
MD5 for aroma build - d16bbe2a05a642d1b5b3b4ade3931356
MD5 for non-aroma build - 5137ea26182f651e281c669da8680ca9
Upstream merge until 3-June-2017
Update stock kernel to 3-June-2017
Update to _r17 android 7.1.2
Update builder PC to java9
Remove SDCARDfs again
Fix tethering on some devices
Reenabled logcat-no qmuxd drain
Use S8s sounds (Notifications/UI/ringtones)
Use S8 wallpaper
Remove some ugly sounds from stock
SettingsProvider:Always allow non-play store apps installations
aroma:Split aroma to 2 pieces (Install/Remove sections
proc: Remove additional SafetyNet flags from /proc/cmdline
Allow apps to read statistics from /proc/stat
Big kernel changes affecting sot and heat
Webview:always use the latest beta version
Fixes on pegasusq and hyper governors
Support two themes for aroma
Back to default bootanimation
Back to 450mhz max gpu-less heat
Revert some audio flags
Enable wifi on first boot
Remove old IR driver
Set freeze timeout to 2 seconds
Debouncing of the light sensor
Disable Dreams by default
Double tap to lock screen to sleep option
Enable power save config for system apps too.Select your apps
Updates on Substratum core
20170507 / (07-May-2017)
MD5 for aroma build - 0204933401f84706ababb6d9a216d070
MD5 for non-aroma build - 617222b57f22ba0834173145d00f7236
Upstream merge until 7-may-2017
Update stock kernel
Updated Alucard kernel
Remerge 7.1.2 to avoid issues
Update to r8
Stable3 Wallpaper
STweaks profiles edits
Add the new HealthD flag to device tree
jflte: turn off carrier provisioning and allow tethering for everyone
Dex2oat speed edits
Edits on audio
Updated default bootanimation
Aroma installer buttons, icons, and colors change
system.prop:Enable use.voice.path.for.pcm.voip
Quick unlock on lockscreen password
Edits on ramdisk affecting battery life
Stweaks:New variable about mediaserver killer
STweaks:Allow user to select other IO while sleeping
CameraWrapper:Increase camera open retries
Add ldjcdo to test team/Remove SkL
Add hyper,pegasusq and slim CPU governors
Wifi Edits from upstream
SystemUI: Use AOSP AutoBrightness implementation
GsmCdmaPhone: Fix GSM SIM card ICCID on NV sub CDMA devices
Speedup the dex2oat operation
Edit on BlueTooth HPF overlay
Truly enable sdcardfs
(IF YOU HAVE ISSUES REMOVE THE ro.sys.sdcardfs=true FROM YOUR /system/build.prop AND REBOOT)
Enable and tweak KSM
Update our flashables
Update aroma-installed packages
Update WebView
Support Custom QS rows/columns
QS Tile which support partial screenshot
GPU MAXIMUM FREQUENCY IS SET TO 200Mhz.Change it if you want from STweaks
Drop stock browser.Use Jelly
prop:set persist.bluetooth.disableabsvol=false
profiles:Fix camera and headset mic volumes
Introduce Aroma-BootAnimations.See it at Optimized LineageOS Settings
Revert "telephony:Hack GSM and LTE signal strength
post-init:Speedup the profiles loading after boot
Update backuptool scripts(Dirty installations are even stabler)
Settings:Add changelog tile(About phone section)
20170413 / (13-April-2017)
MD5 for aroma build - daa09690b2ea350a3cd75d1b98e9708f
MD5 for non-aroma build - 8816663fddf8c97e73ecdaa2a0f335ef
Upstream merge until 12-April
Update stock kernel to 11 April
Update to 7.1.2
Stable2 Wallpaper
Kernel:Enforce kernel to read users edits
Kernel:Huge updates regarding battery life
Readd Logger switch.Default: OFF.REBOOT WHEN CHANGED.(Stweaks/OTHER/Logger)
Kill mediaserver on boot
system.prop: Disable 2 audio-voip flags.Fixes some VOIP apps
Recalculate the lights values
Add HPF bt profile
Reorganize the contributors list
Fix panorama mode on Snap camera
Enable night mode.New QS Tile
Edits on lockscreen's charging message
aroma:Allow user to select Magisk
Faster boot speed
Faster reboot to recovery
Edits on doze
Add lekiaM to contributors
Allow user to select different LED color when device is fully charged
Add some extra infos on some STweaks menus
Edits on Gapps killer
Update ThemeInterfacer
Get latest Substratum commits
Bypass SafetyNet check
Updated ramdisk scripts for Magisk root
Fixed CVE-2017-0583
Show USB mode dialog when USB is inserted
BatteryStatsService:Stop logcat spam about modem
CPU usage overlay:Relocate it,make its interval faster,remove temperature
telephony:Hack GSM and LTE signal strength
Timezone bug is now fixed(Partially?)
Reduce reboot delay by 4 seconds
Edits on LTE tile
Still doesnt work,for a strange reason.to make it work
From Settings use 3g as prefered network
Now the QS tile should be disabled.
It now works
Speed up the UI feeling without affect the animation speeds
Remove the icon from 'Clean all' tweaks
Update Webview
Remove Soft Reboot option
Details here:https://github.com/JDCTeam/android_...mmit/86306fb5df2cdb7932b51a0dbe88b096cb7ac913
Advanced reboot is automatically enabled when you enable dev options
Support microG Gapps by supporting fake signature spoofing
20170120 / (13-February-2017)
MD5 for aroma build - 8198edab63f3e45d81e26773903a7930
MD5 for non-aroma build - 0073655d738380181050645e7771898a
Upstream merge until 13-Feb-2016
Update stock kernel to 13-Feb-2016
Fixes on cellular issues.Affects Sprint variants
Fix device behavior when lid case exist
Overlay:Add some BT profiles
Keep WiFi on during sleep by default
Set backKill time to 250ms
kernel: Disable CPUSET code
system.prop:Enable quick power on
system.prop:Set delay of ringing while calling to 0
fix f2fs for alucard kernel when using SuperSU
[Test]PermissionGrant: added missing permission for gapps
sepolicy: Fix denials after restore of ROM backup
OMS updates
Removed HexoLibre.RIP Theme Engine
Substratum does NOT come with ROM.Please get it from PlayStore
Use 4 cores while installing apps
Updated flashables and aroma packages
Updated webview
Some camera stability edits(Placebo?You tell me)
Fix a buggy situation while Lid case cause freeze
Edited icon when no recents apps,at recents panel
Do not show clear icon when no recent apps
Edited sound steps
Long press Power to activate Torch
Vibrate when connecting or disconnecting a power source
20170120 / (20-January-2017)
MD5 for aroma build - 4caf50d8ec345e25815c30c5210539fe
MD5 for non-aroma build - 08cd79f2277580ab639057849333e5ca
Upstream merge until 20-Jan-2016
Update stock kernel to 20-Jan-2016
LineageOS
Revision r9
Reconstruct the way that ROM is provided
Kernel and ramdisk big updates
STweaks is updated
Refresh Snap preview after photo shoot
Edits on Doze
Substratum support
Edit SMS Limit and restrictions
Wallpaper
Several device edits(affects partitions)
Updated Snap camera
Completely remove CMStats and its drain
Stop some logcat spams
Disable LiveDisplay by default
SuperSU to 2.79 SR3
Give persistent SU access to system apps
Fix WiFi Hotspot
Enable Google Assistant
Add an advanced Google Play Services killer(Default) 'Stweaks/OTHER tab"
SystemUI:Remove 'x' sign from signal icon
Update Wallpaper app
Update ES file manager app
Updated bootanimation
Updated WebView
Add ability to download flashables from Opt-LineageOS menu
Give the proper permissions to your browser
Many transitions from CM to LineageOS
Fix SuperSU related logcat spam
Add membar to OptLineage tweaks
Set back button kill timeout to 500ms
Increase timeout to compile GMS core
Add ability to restrict app data/wifi usage
LineageOS official bootanimation
Add CPU info overlay at developer options
Add mattgyver to Test Team
bluetooth:Allow HFP protocol
Edit Straight Talk APN
Enable Blur feature
Add unlink volumes feature
Some notes about the new build....
F2FS is known to cause issues when we use SuperSU.I hardly suggest to use ext4 for all partitions
On the first boot u may have some browser and music FCs...not constantly though.Select the option to mute the notification until next reboot.
So ,give all the permissions to those apps and reboot when u setup ur device
On the next reboot you wont have such issues.
The folder link contains 2 ZIP files.1 is the aroma 1 is the NON aroma build for those who got issues with it.
Non-aroma build contains :
Alucard kernel
CM File manager
No Nexus apps
No SuperSU
AOSP camera only
Optimized LineageOS settings has got options to download all the aroma installer packages.To do that ,simply click on the desired package.
To make this work,u must have already give the proper permissions to your browser.You can download any package ,even if you installed aroma zip
Dont you want to make a fully clean install ? no problem.BUT.keep in mind that dirty install will keep ur old kernel changes even i made changes to kernel.
So
if u really want to make a dirty install and keep your kernel settings,simply flash the zip over the old one.(optional:delete system and dalvik before that )
if u really want to make a dirty install with the new kernel settings,delete the folder /data/.b--b/ from twrps file manager and then flash the rom as situation 1)
The late reboot time is a known issue on s4 with nougat roms.
Changelog:
20161224 / (24-December-2016)
MD5- 5484ab6d746c2bc8601b5172d01f5d69
---------------------------------------------------
Upstream merge until 24-dec-2016
Update stock kernel to 24-dec-2016
Settings apk:Back to stock colors
APN changes
Kernel and ramdisk changes
RIL/Network changes from upstream
Changed wallpaper
Updated SuperSU to 2.79 SR1
Fix SElinux switch at STweaks
Disabled SDCARDfs again
No scrolling cache-I need smoothness.not speed
Always show battery percentage when charging
Increase sms limit
Removed Gello app
20161210 / (10-December-2016)
MD5- 0db973ada05a5c3800194e8f5308ac64
Upstream merge until 9-dec-2016
Update stock kernel to 9-dec-2016
Update to Android 7.1.1_r4
Ramdisk and profiles updates
Kernel updates
F2FS and sdcard edits
Supersu:Update to v2.78-SR5
STweaks:do not dex preopt
Update ril-service daemon
Add Recents Panel tweaks from OptCM13
New wallpaper
Brand new Snap camera
-Still buggy.Its not ROMs issue.Snap camera is
under development.USE IT AT YOUR OWN RISK!!!
Bugs:
HDR not working.Its N issue.not Snap.wont work
with any app
1 shot with back camera
= freeze of camera preview.
App does NOT freeze.Camera preview DOES.
solution:
Switch to front camera,and back again
OR
press home button to minimize and run it
again to be back
Add OptCM13s camera wrapper
Resetting proximity sensor on every ROM flash
Replace charging string on keyguard(Help me translate
Improve scrolling cache
Speed up background transitions
Add LTE tile(Works but not visible to Settings app
Hold click to get in Network preference menu
Add Sound tile
Add Switch to disable/enable wake on plug
More edits affecting dirty installations
Change the base main color of ROM
Settings icon has got our custom color
Fix circle battery icon
Fix network switch(Preferred network type
Turn off some default CM display features
Implement press home to answer call
Remove STweaks and SuperSU from JDCSettings if not installed
Settings:LED capabilities
Aroma
Add Nexus Launcher & Wallpaper capability
Also clean on installing:
-/sdcard/Android
-/sdcard/DCIM/.thumbnails
-/sdcard/LOST.DIR
Add Camera selection capability
Add file manager selection capability
Fully edited UI
20161121 / (21-November-2016)
MD5- aa8fc17391deed6b3cf8a8b83b5578fb
Big upstream until 21-nov-2016
Stock kernel updated kernel until 21-nov-2016
Alucard kernel updated
Ramdisk changes
Wallpaper changed
Add contributors to Settings/About phone
Remove CM updater
Add S7's UI touch/unlock/lock sounds
Battery save color is now light gray
Disable tap2wake by default(Not supported by kernel)
Disable captive portal by default
Force fast UI experience
Remove useless CM's features
Add JDCTeam's custom scripts(eMMC Trim,LEDify)
Add Samsung's stock notification/alarm sounds from lollipop
Remove snap camera/use aosp one
Edits on camera.(Video recording is partially working)
Edits on ramdisk that affects charging
Fix f2fs
Allow dirty installations(A custom script ensures /system wipe)
Introduce JDCSettings Settings section
Build with -O3 flag on clang
Expose ROM's name at ABOUT PHONE section
Storage manager is enabled by default
Add Google Assistant property
Updates on blobs/graphics
Default STweaks theme is Sammy one
Fix unified tree(All device are now supported!)
20161013 / (13-October-2016)
MD5- dontcare
Initial test release
OptCM13/14 Test Team
@Creeper36
@Chibbo
@-Deco-
@Feedmeeeee
@Pwnycorn
@sjamie
@mattgyver
@lekiaM
JDCTeam's members
Do you have plenty of time and android knowledge?Drop me a PM.i may need you to my team
OptCM Slack channel is closed due to inactivity.Seems like that people prefer an already-chewed food to eat than,cook it.
Many thanks for your generous donations !
All donators are welcome to join the optcm test team and / or get access to beta versions built every couple of days, PM me for details.
Differences compared to nightly so far
JDCToolbox
ROM built with Linaro toolchain
Stock kernel built with Linaro toolchain
Custom Setup Wizard
faster transitions
Unified tree(didnt test CDMA.please report me back)
Custom boot animation
Holding home button presents recents menu
Odexed
Aroma installer
Alucard kernel
STweaks
Some tweaks out of lineageOS
Enable logcat on stock kernel
Code:
adb shell
su
start logd
exit
adb logcat > mylog.txt
Google assistant guide
by @Apad121
thanks for that mate
Apad121 said:
Hi everyone
Just wanted to say that I got Google Assistant working on this ROM and it seems fast to work really well!
BTW the bug above happens to all devices that aren't pixel or nexus.
THE BUG WITH OK GOOGLE IS WORKING NOW..... SEE BELOW IN STEP 9:
GUIDE ---- I had to find lots of articles and looked through many guides because CM14.1 was slightly different to CM14 and android nougat. Because of how we flashed different Gapps it made the installation quite difficult. However after a bit of problem solving and determination I succeeded in getting Google Assistant on this great ROM.
1 Go to build.prop (I just used BuildProp Editor from the Play store, once in the app I pressed the edit button on the top right)
2 I changed "ro.product.name=cm_jflte" to "ro.product.name=Pixel XL" (I am not convinced this is neccassary but I did it anyway and it works)
3 Add "ro.product.model=Pixel XL" at the bottom (the ROM didn't have the ro.product.model bit that most phones seem to have...)
4 Add ro.opa.eligible_device=true after the above (Add this underneath the 3rd step)
5 Save the build prop then Reboot phone (Almost there)
6 Clear Google app data (This is to help ensure the process works)
7 Launch Google assistant as if you would launch now on tap so go to settings>functions> select home button >long press >select search assistant (OR SET IT TO ANY OTHER BUTTON YOU WANT)
8 Go to Google app settings and check you have enabled Google assistant
9Install the application and setup (credit to @masterchop for making this app ) ChopAssistant https://play.google.com/store/apps/details?id=choplabalagun.blogspot.com.chopassistant&hl=en
10 FINISHED! :laugh: (Please read the rest below)
IF IT STILL DOESN'T WORK DO NOT WORRY ---- IF YOU FLASHED A SMALL GAPPS SUCH AS PICO GAPPS THEN THERE IS STILL 1 MORE STEP!!!
11 Now if you had to install the google app when you first setup the phone, then you need to move the file "com.google.android.googlequicksearchbox-1" from data/app to system/priv-app
Google Assistant for CM14.1, this guide covers most errors and problems you will face for installing it on any device including CM14 and Android 7.x
Reboot and NOW GOOGLE ASSISTANT should work with "OK Google" working too!
PLEASE LEAVE A LIKE IF THIS HELPED! :laugh:
Click to expand...
Click to collapse
Hehe! Jdc did it again!
Today is a good day ?
Enviado desde mi GT-I9505 mediante Tapatalk
angelcalibur said:
Hehe! Jdc did it again!
Click to expand...
Click to collapse
thaaaaaaats true mate
Where is the download link? It says its on drive but I don't see a link? ?
Sent from my SGH-M919 using Tapatalk
It's Awsome thank you
Xplorer4x4 said:
Where is the download link? It says its on drive but I don't see a link? ?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Try again.my fault.thanks!
Downlaoding
Wow, huge deal, thanks JDCTeam! Very excited to have this on my phone!
----Sent from my phone----
For who have installed the rom: wich gapps are you using ? Thanks :cyclops:
AlfaTeam Corporation said:
For who have installed the rom: wich gapps are you using ? Thanks :cyclops:
Click to expand...
Click to collapse
Please use the suggested package which is OpenGapps.read first post
I'm trying to download but it never downloads successfully. Can you use a different host maybe?
Sent from my SGH-M919 using Tapatalk
Xplorer4x4 said:
I'm trying to download but it never downloads successfully. Can you use a different host maybe?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
not now.i have made 20gb upload today
side said:
Please use the suggested package which is OpenGapps.read first post
Click to expand...
Click to collapse
Okay, thanks The Galaxy S4 i9505 is ARM64 ?
AlfaTeam Corporation said:
Okay, thanks The Galaxy S4 i9505 is ARM64 ?
Click to expand...
Click to collapse
ΑRM
AlfaTeam Corporation said:
Okay, thanks The Galaxy S4 i9505 is ARM64 ?
Click to expand...
Click to collapse
No just arm
Sent from my SGH-M919 using Tapatalk
---------- Post added at 03:18 PM ---------- Previous post was at 03:14 PM ----------
Can any one upload this to a mirror?
Sent from my SGH-M919 using Tapatalk
Based on CyanogenMod 13.0 - Android 6.0.1 Marshmallow
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Spoiler: Disclaimer
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
CherishOS for Mi Mix 2 [chiron]
* Has a Pixel UI noodles by Hung Phan. So many features that you probably won't find in any ROM. All you can dream of and all you'll ever need. Just flash and enjoy...
Based on Android 13
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
NFC
Lights
Sound/vibration
Known issues
Encryption on f2fs doesn't workInstallation
Choose your flavor
1. You can choose between the traditional EXT4 or the new EROFS. This fs affect only to /system and /vendor partitions
2. Magisk doesn't work on EROFS at the moment. Anyway I've included KernelSU on kernel, so you can install if you want KernelSU app in order to get root and flash magisk modules
3. Once selected root partitions fs, you can choose fs for /data and /cache partitions between traditional EXT4 or F2FS
4. Note that EXT4 comes with encryption by default and F2FS comes unencrypted
Decide if you want encryption or not
1. If you want encryption, use EXT4 on /data partition
2. If you prefer to go unencrypted, then use F2FS on /data partition
First Time Install / Clean Flash
1. Due to latest changes, is mandatory to use my last TWRP posted below
2. Reboot into recovery mode
3. Go to Wipe --> Advanced Wipe --> Select Data/Cache --> Swipe to Wipe --> Reboot into recovery
4. If you already have /data on f2fs (or ext4 unencrypted) and want stay that way, skip step 5
5. Go to Wipe --> Format Data (internal storage will be wiped too, backup your data) --> Type yes and accept -->
Reboot into recovery
6. Download the ROM and copy it into internal storage
7. Flash the ROM (and magisk if you consider it, but ONLY on EXT4 version, over EROFS will bootloop)
8. Reboot to system
Dirty Flash over previous CherishOS v4.7.5 or later
NOTE: Do not dirty flash over old versions earlier than 4.7.5. In that case do a clean flash
1. Due to latest changes, is mandatory to use my last TWRP posted below
2. Reboot into recovery mode
3. Download the ROM and copy it into internal storage. You must use the same version alteady installed (EROFS or EXT4)
4. Flash the ROM (and magisk if is already installed, but ONLY on EXT4 version, over EROFS will bootloop)
5. Reboot to system
Change /cache and /data filesystem from ext4 to f2fs
1. You must format /data partition, so all your data and internal storage will be deleted. Please backup your files
2. Reboot into recovery mode
3. If already encrypted: Go to Wipe --> Advanced Wipe --> Select Cache and Data --> Swipe to Wipe --> Reboot into recovery
4. Go to Wipe --> Format Data --> Type yes and accept --> Reboot into recovery
5. Go to Wipe --> Advanced Wipe --> Select Data --> Repair or Change File System --> Change File System --> F2FS --> Swipe to Change
6. Repeat step 5 but selecting Cache
Change /cache and /data filesystem from f2fs back to ext4
1. You must format /data partition, so all your data and internal storage will be deleted. Please backup your files
2. Reboot into recovery mode
3. Go to Wipe --> Format Data --> Type yes and accept --> Reboot into recovery
5. Go to Wipe --> Advanced Wipe --> Select Cache --> Repair or Change File System --> Change File System --> EXT4 --> Swipe to Change
Hybrid Mode
You can have /cache and /ext4 on different filesystems, so follow previous instructions to put the partitions on your desired filesystem
Download EXT4 version - Vanilla
googledrive / mediafire
MD5: d3566ba4e209c9787475ba03c8de6a3c
SHA1: 658bae71db757c1508dd76e62a1baad42758b881
Download EROFS version - Vanilla
googledrive / mediafire
MD5: e4f61ade8c0c4673ccb1e695a85a644d
SHA1: 6f20c5f42b5061032c5429f71b9a9e3beb108e96
Download EXT4 version - GApps
googledrive / mediafire
MD5: e5d05a9a40db2c48b33708c7e92851df
SHA1: ae69120b7d25cf4cdb7b0889eacb9f4bfbf8769e
Download EROFS version - GApps
googledrive / mediafire
MD5: 5053f017308d9eaf2845089bbe51a06f
SHA1: a84cb0b0c37a7803f89170115ab4fc35c85c770e
Download latest TWRP
googledrive / mediafire
MD5: 5c4845b2f5378abba303688aca000c46
SHA1: a2d71742f2928817fc3426ecba843c50f3cc4291
Android OS version: 13.0.0_r43
Build ID: TQ2A.230505.002
Security patch level: May 05 2023
Build author/Device Maintainer: Huexxx
Source code: CherishOS GitHub repos
Trees and Kernel: Huexxx GitHub repos
Status: Stable
SELinux Status: Enforcing
Release date: 2023-06-10
Buy me a Beer!
Features / Changelog 2023-06-10
- Launcher3:
-- Changed to real modded CherishOS base
-- Switch from Google's Smartspace to Quickspace
-- Option to force monochrome non-themed icons
- ThemePicker:
-- Changed to moded ProtonPlus base
-- Allow color picker on vanilla versions too
- Removed keyguard Google's Smartspace
- Add Omnijaws Weather API
- Add Jelly browser on vanilla version
- Kernel:
-- Update kernelsu
Features / Changelog 2023-05-09
- Source updated
- Fixed Wallpaper & Style (basic colors)
Features / Changelog 2023-05-06
- kernel:
-- Switch to EROFS legacy version (less changes to base 4.4 kernel avoiding possible problems)
-- Switch to Simple Low Memory Killer
-- Add SchedTune and CpuSets Assist
-- Several EAS tweaks
-- Several sched/mm/cpufreq commits
- Source updated (upgraded to android 13.0.0_r43)
Features / Changelog 2023-04-27
- kernel:
-- Backported support for EROFS fs
-- Backported support for Cgroup v2 Freezer
-- Switched to 2SI (two stage init)
-- Added KernelSU support
- Source updated (upgraded to android 13.0.0_r41)
Features / Changelog 2023-03-26
- kernel:
-- Reverted some not wanted commits
-- Some logspam removed
-- Boot time has been reduced by 26 seconds
Features / Changelog 2023-03-09
- Source updates
- Encryption fixed!
Features / Changelog 2023-03-07
- Source updates
- Temporary removed forced encryption from device trees
Features / Changelog 2023-03-06
- Source updates
- ReAdded option to install custom themed icon packs for Launcher3
- Kernel: Added some commits regarding EAS and cpufreq
- Some adjusts in a try to make encryption work
- Sepolicy: Address some denials
Features / Changelog 2023-03-01
- Source updates (upgraded to android 13.0.0_r30)
- Removed the option to install additional themed icons from Launcher3 (I'll study to return it)
- Some kernel commits
- Some device tree commits
Features / Changelog 2023-01-28
- Source updates
Features / Changelog 2023-01-20
- Source updates
- Launcher3:
-- Bring back 'At a Glance'
-- Import widget overlap from Lawnchair
- Kernel updates
- Gapps slimming diet (many apps have been dropped)
- Some commits on qcom-caf display hal
Features / Changelog 2023-01-19
- Source updates
- Improved sepolicies
- Imported Launcher3 from EvoX:
-- Adapted to work with CherishOS
-- New app icon and modified name
-- Removed 'At a Glance' due to CherishOS sources
-- (I'll try to restore it)
Features / Changelog 2023-01-17
- Source updates
- Improved sepolicies
Features / Changelog 2023-01-10
- Sources updates
- Switch to OSS libnotifyhal (make proximity sensor work without binder, new lineageos approach)
- Drop vndk-ext packages
- Switch BTAudio to AIDL
- Switch to common fingerprint HIDL
- Config SQLite to operate in MEMORY mode
Features / Changelog 2022-12-28
- Sources updates
- Downgraded audio and listen blobs to older revision
- Downgraded display drivers to fix camera problems
- Drop Soundtrigger, Renderscript and qti perf stack
Features / Changelog 2022-12-01
- Source updates
- kernel:
-- Switch to LLVM tools for compiling
-- Xiaomi updates
-- Backport binder from 5.4-lts
-- Lots of commits/patches
- Updated audio, listen, thermal-engine, display and DRM blobs
- OpenGL ES driver updated to OpenGL ES 3.2 [email protected]
- Updated Display HAL to LA.UM.10.6.2.r1-01900-89xx.0
- Update GPS hal and blobs from LA.UM.9.6.3.r1-06200-89xx.0
- Fixed soundtrigger (Ok Google)
- Reenabled thermal-engine
- Many more...
Features / Changelog 2022-11-10
- Fixed Night Light
- Fixed LiveDisplay
Features / Changelog 2022-11-09
- Source updates
Features / Changelog 2022-11-08
- Source updates
-- Upgrade to release 14
-- November security patch
-- Readded FaceUnlock
Features / Changelog 2022-11-03
- SoftAP:
-- Add AP band preference
-- Add list to select Country Code spoof
-- Extend funcionality to QS button
- Added GrapheneOS Camera v56 from GrapheneOS repos
- On GApps version:
-- Replace Pixel Launcher with mod (allow more desktop grids)
-- Added GoogleCamera to MGC-8.4.300_Parrot043_V1.5
- Selinux Enforcing
reserved
OP Updated.
OP Updated-
OP Updated!
OP Updated!
Man I'm so glad someone hasn't given up on this phone. It's pretty awesome with how thin and lightweight is. I've got the Mix3 and it's a heavy brick. Thanks for keeping the Dev going. Definitely going to download and give it a shot.
OP Updated.
have this rom installed(latest), gps green light is always on. and it says that its being used by google play services.and it cant be disabled. or there is any option to disable it?
one more bug found:
when i'm trying make(not to attach existing one) and send photo in Telegram or WhatsApp - it hangs.
when i'm trying make(not to attach existing one) and send photo in Telegram or WhatsApp - it hangs.
Same result for me. Video clip is recording and available for editing (via long tap), but when trying to make photo - Telegram hangs just after the tap and the flash fires.
OP updated!
Huexxx said:
OP updated!
Click to expand...
Click to collapse
Hi, Google drive link for GAPPS image seems to be broken for me. Thanks for updates
Have you checked sha1 or md5 hashes?
Have you managed to download from mediafire?
Is the first complain in that way so maybe is an isolated problem...
If someone else reports the same I'll re-upload it.
Huexxx said:
Have you checked sha1 or md5 hashes?
Have you managed to download from mediafire?
Is the first complain in that way so maybe is an isolated problem...
If someone else reports the same I'll re-upload it.
Click to expand...
Click to collapse
I've downloaded and installed image from Mediafire - it's OK.
Link from Google Drive - it says error "File not found" - so I can't even check it.
Strange, I've just downloaded it from link without problems... maybe it was an isolated problem.
I faced a problem but solved it.
I had the official CherishOS (Android 11) for chiron installed with the latest official TWRP for chiron. When I installed the Nanhumly built TWRP it couldn't decrypt. So I went back to the official TWRP and flashed this CherishOS (Android 13) with NikGapps and Magisk. It installed and system booted up alright. When I went back to recovery, now the official TWRP couldn't decrypt. So I flased the Nanhumly build and it could decrypt now.
So I figured that the official one works up to Android 11 and the Nanhumly build is for 12 and above. I'm a n00b so this is a revelation for me. That's why I'm sharing the experience for fellow n00bs.
Great build Huexxx. It's running smoothly. I'll report back after few days of use.
Happy New Year! Cheers!
picchishaitan said:
I faced a problem but solved it.
I had the official CherishOS (Android 11) for chiron installed with the latest official TWRP for chiron. When I installed the Nanhumly built TWRP it couldn't decrypt. So I went back to the official TWRP and flashed this CherishOS (Android 13) with NikGapps and Magisk. It installed and system booted up alright. When I went back to recovery, now the official TWRP couldn't decrypt. So I flased the Nanhumly build and it could decrypt now.
So I figured that the official one works up to Android 11 and the Nanhumly build is for 12 and above. I'm a n00b so this is a revelation for me. That's why I'm sharing the experience for fellow n00bs.
Great build Huexxx. It's running smoothly. I'll report back after few days of use.
Happy New Year! Cheers!
Click to expand...
Click to collapse
Exactly, I recommend in my op to use nanhumly's build to use encryption (or not).
OP Updated!
NOTE: I haven't tested this build by myself, so make a backup prior to flash it.
Tried out 2023-01-10 (Vanilla)
That camera issue seems to be fixed.
For some reason the the CherishOS Launcher has been removed and replaced with a plain .launcher3 launcher. (No customizing settings available)
Does any one know where I can get an APK for the CherishOS Launcher? (Was available in 2022-12-01)
Edit: As an added benefit of the new launcher is that it is compatible with any Launcher that has Quickswitch support. So I was able to install the latest Lawnchair 12.1 dev and still have working gestures