Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?
paramjeetgem said:
Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?
Click to expand...
Click to collapse
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.
shashank1320 said:
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.
Click to expand...
Click to collapse
TWRP or stock cm recovery or anything will do..??
cksup said:
TWRP or stock cm recovery or anything will do..??
Click to expand...
Click to collapse
anyone will do. Better to go with TWRP latest and if you change your mind later to install some other latest custom ROMs, then you wont face any issue with inbuilt root permission with latest TWRP (as some of them not working on older TWRP) and also TWRP is better for the backup and restore as well.
Related
Hello. I'm currently running on 3.5.2 community build.
I have stock recovery and wanted to go back to 3.2.4.
I had hoped this would be a simple affair but there a few posts which state that having tried to sideload the stock rom using stock recovery the process halts at 47℅?
I had assumed this would be a straight forward process to revert back to stock?
Can anyone advise the process please?
I'm running a one+ 3 and I'm totally unrooted.
http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
use this recovery.
This won't work.
You've to flash completely stock from Naman thread
Then only u can flash any oos based rom or cm 13 rom.
Coz in latest beta built od oos firmware is changed.
So until you flash old firmware you won't be able to flash.
Sent From My One Plus 3
you can`t but they have know the issue and working on a solution: https://forums.oneplus.net/threads/oxygenos-3-2-6-mm-ota-for-oneplus-3.465753
freakzapster said:
This won't work.
You've to flash completely stock from Naman thread
Then only u can flash any oos based rom or cm 13 rom.
Coz in latest beta built od oos firmware is changed.
So until you flash old firmware you won't be able to flash.
Sent From My One Plus 3
Click to expand...
Click to collapse
Can you please help me with this i have the exact situation i would really appreciate it if you helped me step by step
so why dont you just side load twrp and flash a stock rom or you dont want to oem unlock
saadq101 said:
Can you please help me with this i have the exact situation i would really appreciate it if you helped me step by step
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3405700
If you've already flashed beta built you'll require method 2.
Sent From My One Plus 3
You must download alla in one tool kit forma oneplus 3
Respected Dev/Experts
Please help me I'm confused with Yureka AO5510 & yu5510 vs 5510A my device is 5510A. My device hard bricked 3 times. Whenwhil I try to flash any cm ROM my touch screen works only half part(malfunctioning) please help me what should I flash for my Yureka 5510A device?
Reply As soon As Possible. Thanks in Advance.
Best Regards.:crying:
Please help me out dear....
I am also using yu5510a stock android variant and its hard bricked how did you unbricked your Yureka plus yu5510a from hard brick please tell me the procedure to unbrick my phone its totally dead ......:crying:
Volume up + attach data cable to connect in fastboot then Flash cyanogen using ygdp tool first then your model number shown 5510 .
Unlock bootloader and install twrp same commands.
Flash official 12.1 cyanogen signed .zip
Keep twrp alive.
Then install any custom ROM.
Thats it.
Not so simple not so difficult.
Always be ready to revive your handset from soft brick or hard brick.
Good luck.
nischait said:
Volume up + attach data cable to connect in fastboot then Flash cyanogen using ygdp tool first then your model number shown 5510 .
Unlock bootloader and install twrp same commands.
Flash official 12.1 cyanogen signed .zip
Keep twrp alive.
Then install any custom ROM.
Thats it.
Not so simple not so difficult.
Always be ready to revive your handset from soft brick or hard brick.
Good luck.
Click to expand...
Click to collapse
Are these instructions for new yureka 5510a? Have you tried this method?
Please provide links for cynogen to flash with ygdp tool and official 12.1 cynogen.
I have googled the instructions for 5510a but couldnt find anyrhing. Plz help... Thanks in advance.
harshgup said:
Are these instructions for new yureka 5510a? Have you tried this method?
Please provide links for cynogen to flash with ygdp tool and official 12.1 cynogen.
I have googled the instructions for 5510a but couldnt find anyrhing. Plz help... Thanks in advance.
Click to expand...
Click to collapse
http://forums.yuplaygod.com/threads/12-1-incremental-update-for-yureka-yureka-plus-yuphoria.38413/
Link
I post here about 5510A and I checked it on 5510a before post.
12.1 is flashable through recovery
From firmwarefile download first version which is Cyanogen after that unlock bootloader and install twrp and then flash 12.1 official
Be sure twrp should be alive if twrp lost you have to again install it.
After that download & install any custom ROM.
dhrtlockeroo9 said:
Respected Dev/Experts
Please help me I'm confused with Yureka AO5510 & yu5510 vs 5510A my device is 5510A. My device hard bricked 3 times. Whenwhil I try to flash any cm ROM my touch screen works only half part(malfunctioning) please help me what should I flash for my Yureka 5510A device?
Reply As soon As Possible. Thanks in Advance.
Best Regards.:crying:
Click to expand...
Click to collapse
which cm u flashed and from where u downloaded the cm??
just search the cm rom on youtube , u will find the perfect link.
better to flash the stock cm via fastboot
I'm on Aosip ROM.... Before ROM open bete 12 & possible 4.0.3
Recovery 3.0.4 (tested on all recovery)
Sucsecfully flashed other 7.0/7.1.1 Roms
Amar5373 said:
I'm on Aosip ROM.... Before ROM open bete 12 & possible 4.0.3
Recovery 3.0.4 (tested on all recovery)
Sucsecfully flashed other 7.0/7.1.1 Roms
Click to expand...
Click to collapse
Error 7 is usually related to firmware. Check on the thread what is need and flash that before the rom
Thred link please
Amar5373 said:
Thred link please
Click to expand...
Click to collapse
This zip is the firmware and modem for the OnePlus3
https://www.androidfilehost.com/?fid=817550096634750069
According to this thread https://forum.xda-developers.com/on...-aicp-12-0-n-7-0r14-oneplus3-t3478735/page161 you need open beta 12 firmware. Note it's only for the OnePlus3 not the 3T
Check on the Rom thread you are trying to flash for the firmware needed. Just reread your first post, it may be a different firmware for cm/lineage 13. There is a thread on here where all the firmware zips are posted
Amar5373 said:
I'm on Aosip ROM.... Before ROM open bete 12 & possible 4.0.3
Recovery 3.0.4 (tested on all recovery)
Sucsecfully flashed other 7.0/7.1.1 Roms
Click to expand...
Click to collapse
As CM13 is based on Android 6.0 Marshmallow, so you will need the Marshmallow based firmware. Means you can flash OOS3.2.8 stable firmware or open beta7 firmware & then try to flash the ROM.
Link for All Firmware :- https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
This fabulous work is of @jamal2367. Above link contains all the firmware & modem collectibles from android 6.0 through android 7.1.1.
qasimtb said:
As CM13 is based on Android 6.0 Marshmallow, so you will need the Marshmallow based firmware. Means you can flash OOS3.2.8 stable firmware or open beta7 firmware & then try to flash the ROM.
Link for All Firmware :- https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
This fabulous work is of @jamal2367. Above link contains all the firmware & modem collectibles from android 6.0 through android 7.1.1.
Click to expand...
Click to collapse
I was flashed penbeta 7 & 3.2.8 also.....Got same error 7 :crying:
qasimtb said:
As CM13 is based on Android 6.0 Marshmallow, so you will need the Marshmallow based firmware. Means you can flash OOS3.2.8 stable firmware or open beta7 firmware & then try to flash the ROM.
Link for All Firmware :- https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
This fabulous work is of @jamal2367. Above link contains all the firmware & modem collectibles from android 6.0 through android 7.1.1.
Click to expand...
Click to collapse
Flashed firmware + modem bt nothing happened
Amar5373 said:
Flashed firmware + modem bt nothing happened
Click to expand...
Click to collapse
For exact issue can you provide me the details about the ROM that you are trying to flash. Is it Sultanxda's CM or arter97's CM or official CM13
qasimtb said:
For exact issue can you provide me the details about the ROM that you are trying to flash. Is it Sultanxda's CM or arter97's CM or official CM13
Click to expand...
Click to collapse
I'm flashing sultan's ROM....
Pls tell me prosidure of cm13 flashing
Amar5373 said:
I'm flashing sultan's ROM....
Pls tell me prosidure of cm13 flashing
Click to expand...
Click to collapse
Have you visited the ROM thread. There is a link for the Open Beta firmware by Sultan itself.
Have you tried it. If not then 1st flash that firmware as it is tested and working. I too use Sultan 's CM as its very stable.
qasimtb said:
Have you visited the ROM thread. There is a link for the Open Beta firmware by Sultan itself.
Have you tried it. If not then 1st flash that firmware as it is tested and working. I too use Sultan 's CM as its very stable.
Click to expand...
Click to collapse
Pls give me the link
Amar5373 said:
Pls give me the link
Click to expand...
Click to collapse
Link to the ROM :- https://forum.xda-developers.com/on...m-kernel-unofficial-cyanogenmod-13-0-t3444221
Everything you need can be found in the OP's message.
Amar5373 said:
Pls give me the link
Click to expand...
Click to collapse
There are search options every where.. Your not a little kid I hope..
qasimtb said:
Link to the ROM :- https://forum.xda-developers.com/on...m-kernel-unofficial-cyanogenmod-13-0-t3444221
Everything you need can be found in the OP's message.
Click to expand...
Click to collapse
Thanks brother for guide me..... Finally I was flashed cm13 sucsecfully .....
Wipe catch > that file provided on cm13 for( modem open beta+ twrp file) >After that cm13 ROM >GAPPS >DONE :laugh:
Pls tell me any other mod u using on your cm13 Thanks alot brother ,?
qasimtb said:
Link to the ROM :- https://forum.xda-developers.com/on...m-kernel-unofficial-cyanogenmod-13-0-t3444221
Everything you need can be found in the OP's message.
Click to expand...
Click to collapse
Puddi_Puddin said:
There are search options every where.. Your not a little kid I hope..
Click to expand...
Click to collapse
Specially need camera port....
Amar5373 said:
Specially need camera port....
Click to expand...
Click to collapse
http://lmgtfy.com/?iie=1&q=Oneplus+3+camera+port
Amar5373 said:
Specially need camera port....
Click to expand...
Click to collapse
You don't need the camera port for Sultan 's CM. Its already heavily optimized and gives best captures just like Stock OOS camera.
qasimtb said:
You don't need the camera port for Sultan 's CM. Its already heavily optimized and gives best captures just like Stock OOS camera.
Click to expand...
Click to collapse
Kk thanks so much
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
You should use treble twrp to install rom
JR Bautista said:
You should use treble twrp to install rom
Click to expand...
Click to collapse
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
update your bootloader to oreo?
JR Bautista said:
update your bootloader to oreo?
Click to expand...
Click to collapse
Yes, 0xC182
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
TeamMex said:
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
Click to expand...
Click to collapse
Ok, thanks, friend, I'm going to try it like that
MirandaEduardo said:
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
Click to expand...
Click to collapse
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
khanpatriot said:
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
Click to expand...
Click to collapse
Yes, this Is a link
https://drive.google.com/file/d/1W-DXW1qm0g6GaALjKuA1pvM-_RHqlZ4j/view
Thanks alot
Oooppss one more query does software channel matter? I'm currently running lineage os 14.1 and i can't find the exact software channel of my device I'm little confused is it retus retail or some other channel. Can u plz help?
Hey dear xda-dev people,
i have bought a used redmi note 8 pro. And because i want a safe and secure smartphone i would appreciate it that the OS has no google software on it. I read that theres only an unofficial lineage os which is currently not updated anymore. What else custom firmwares are safe, do regulary get updated and doesn't have any google tools? I thought about crDroid.
How do I install custom firmwares and stuff? I'm not a complete beginner - i know adb fastboot etc. but I read that there should be a special situation with the Redmi note 8 pro. I just enabled the dev mode. My device has 128 gb and is actually running on global MIUI-Version 12.0.2. Stabil. The android version is 10QP1A.190711.020.
Can you please help me and spread your knowledge?
Greets,
newbie922
Seems you didn't even search for it...
Here is a full guide. Flash TWRP > Do a full backup > Install any ROM you want, you can find some of the ROMs here.
I searched for it but i was pretty unsure because i read that a brick can happen very easily with this phone. thanks a lot for your answer!
The phone is now succesfully unlocked. Is the
"5. LR Team TWRP" really the correct twrp for my actual android (10QP1A.190711.020) and miui version (Version 12.0.2). Stabil.
Then I will try to flash it and report. Should I Install something like an antibricktool first?
@newbie922 Do you want to install CFW or nom-CFW custom ROM?
I want to install a cfw without google apps. Also a non cfw with no google apps would be great!
Do you have something which you can recommend? Regulary updates would be cool.
newbie922 said:
cfw without google apps.
Click to expand...
Click to collapse
Resurrection Remix (latest build requires CFW 2.1)
newbie922 said:
Also a non cfw with no google apps would be great!
Click to expand...
Click to collapse
Mabye Havoc OS?
That sounds good. I already read about this both firmwares. But question now is if it's safe to install the LR Team TWRP with my actual android and MIUI-Version. After i succesfully installed twrp I can install the resurrection remix or the havoc os?
Data Encryption is still possible with both of the firmwares?
newbie922 said:
After i succesfully installed twrp I can install the resurrection remix or the havoc os?
Click to expand...
Click to collapse
For Resurrection Remix - follow method #1 from Megathread https://forum.xda-developers.com/t/guide-info-psa-redmi-note-8-pro-megathread-cfw.4056527/
For non-CFW ROM - first of all - install TWRP 3.5.1 Unified.
So you mean this twrp for example? https://forum.xda-developers.com/t/...-black-twrp-3-5-1-v2-unified-begonia.4241633/
Concerning the megathread it's not possible to just install a cfw afterwards by flashing it? I have to downgrade to A9 etc. etc.
newbie922 said:
So you mean this twrp for example? https://forum.xda-developers.com/t/...-black-twrp-3-5-1-v2-unified-begonia.4241633/
Click to expand...
Click to collapse
For example.
Here's official TWRP for Note 8 Pro
Download TWRP for begonia
Download TWRP Open Recovery for begonia
eu.dl.twrp.me
newbie922 said:
I have to downgrade to A9 etc. etc.
Click to expand...
Click to collapse
Yes, get yourself down to business