CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Download
RECOVERY: Androidfilehost twrp-3.0.0-0-idol347-f2fs.img
ROM: Androidfilehost cm-12.1-20160209-UNOFFICIAL-idol347.zip
GAPPS: OpenGAPPS
Changelog
Code:
Current changelog: 2016-04-05
- Security Patchlevel April
- support 6039H
- small changes from upstream
Older changelogs:
Code:
2016-02-09
- Security Patchlevel February
- fixed some selinux denials
- removed obsolete script for variant identification
2016-01-31
- added support for 6039J (thanks @Faustop)
- lockscreen rotation toggle should now work as expected
- removed some unused services (thanks @Unjustified_Dev)
- added sepolicy (might cause some issues, please test)
2016-01-14
- fix inverted camera for those with samsung rear cam (confirmation needed)
- lockscreen rotation can be toggled now
- Security Patchlevel January
2016-12-09
- Now supports A, K,S and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- minor changes to camera
- Security Patchlevel December
2015-11-27
- Now supports A, K and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- LTE can now be chosen as preferred network
- added tethering options
- fixed writing to sd card
Detailed changelog:
https://github.com/pivoq/android_device_alcatel_idol347/compare/aa2b95e...pivoq:3df7e26
2015-11-18
- fixed regression which prevented access to bootloader
- added some missing camera blobs
- removed lots of unused stuff
- added some system.prop optimizations from upstream cm
2015-11-15
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g [URL="https://www.androidfilehost.com/?fid=24269982086999020"]this one[/URL])
2015-11-09
- initial release
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@Unjustified Dev
@petrov.0
@ashwin007
XDA:DevDB Information
CyanogenMod 12.1 for Alcatel ONETOUCH IDOL 3 4.7, ROM for the Alcatel Onetouch Idol 3
Contributors
pivoq, Unjustified Dev, petrov.0
Source Code: https://github.com/pivoq/android_device_alcatel_idol347
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-11-09
Last Updated 2016-04-06
Reserved
As requested, here's a thread for the 4.7" device. The build runs fine on my end without any major flaws (6039Y), however I expect rough edges on other device variants, especially those featuring dual sim functionality.
So please give feedback and provide logs if you find any bugs.
I really don't want this to be a one man show, so I encourage everyone willing to build/contribute to check out my github and get involved!
Oh! great
First release going to test this
Thanks @pivoq :good:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Nelle9900 said:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Click to expand...
Click to collapse
Could you please be more specific on what bugs you are talking about
too bad there is no stock camera
pivoq said:
Could you please be more specific on what bugs you are talking about
Click to expand...
Click to collapse
Sometimes terbuchet or what else, stopped working. I do factory reset today and i didn't see again that problem. Maybe it fixed the problem, consider that solved.
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
One thing i noticed when i place a call, that is seems to be to quiet sound. I can't sometimes clearly hear what is person talking to me. But not a big problem, it heppens sometimes.
Problem on instagram is solved with this rom. On 5.0.2 I have video problem on instagram, video do not play always.
My recommendation is kernel tweaks, maybe some minor overclocking to cpu and gpu, just for test, maybe that will speed up a lilttle bit this respectable device we have.
Best regard man and sorry for my bad english
And can someone post fleshable kernel of this rom? Thanks in advance.
Nelle9900 said:
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
Click to expand...
Click to collapse
You can disable it in settings
Nelle9900 said:
And can someone post fleshable kernel of this rom? Thanks in advance.
Click to expand...
Click to collapse
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
thanks to make this for 4.7. system working faster than stock.
- nice audio equalizer but black player got better
- there is cm camera but missing some manual options like shutter speed - so i wait for change this
- double tap to on/off - there is trick to use gesture with nova launcher and app "screen off and lock" but when you are in lock screen tap working only around status bar
pivoq said:
You can disable it in settings
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
Click to expand...
Click to collapse
I know that u can disable it, i didn't mean that, i love that option, but personaly didn't like to tap on status bar, it's better to tap on screen (midlle of screen). But it's okay man
Kernel - i don't know how to download fleshable kernel from github
I wont to mod the kernel, set a higher freq for cpu and gpu = overclock. If you know how to download and make a flashable kernel i will mod it.
First post was updated with latest build.
Current changelog: 2015-11-14
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g this one)
Google service isn't working.
I can't login.
"Unfortunately, Google has stopped play services."
I tried opengapps pico, nano, stock, super.
Older versions work fine
Same problem here, opengapps crashing, i will try with an older version of gapps
edit: still fc, even with 04-04-2015 gapps 5.1.1 version :-s
logs or didn't happen
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Scutariu said:
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Click to expand...
Click to collapse
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
pivoq said:
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
Click to expand...
Click to collapse
I can't acces play store, when I try to add my google account, it crashes automatically
Scutariu said:
I can't acces play store, when I try to add my google account, it crashes automatically
Click to expand...
Click to collapse
https://www.apkmirror.com/apk/googl...ebview-47-0-2526-61-arm-android-apk-download/
Related
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
These are UNOFFICIAL CyanogenMod builds built using the UBER-Toolchain (refer: https://plus.google.com/+ChetKener/posts/YzMJEkzPQgp ).
FOR UNLOCKED BOOTLOADERS ONLY!
Features:
These builds are completely based on CyanogenMod sources, and contain no modification of framework from my end.
WORKING:
Mostly Everything
NOT WORKING/BUGGY:
Camera, although present, is laggy and a WIP (like all other MM ROMs)
INSTRUCTIONS
-> Backup all important files
-> Boot into recovery
-> Wipe data/Factory Reset
-> Flash ROM
-> Flash GApps (optional)
-> Reboot
DOWNLOAD:
All builds can be downloaded from my AndroidFileHost folder linked below.
ROM: https://www.androidfilehost.com/?w=files&flid=57341
GApps: http://opengapps.org/
CHANGELOG:
Code:
[U]22-Sept-2016
-> Edited changelog after a long time :P
-> Switched to 1.3.3 branch of unified kernel
-> Using latest blobs from Sony.
-> Boot to recovery from OS finally works
-> Latest CM sources and upstream updates.
[U]07-May-2016[/U]
-> Latest v5a blobs from Sony
-> Fixed all calling and data issues.
-> Bootanimation scaling issue fixed.
-> Based off AICP tree. (Thanks to everyone who's contributed to that, especially be_mler_)
[U]11-March-2016[/U]
-> Include March security updates.
-> Latest CM Sources.
-> Fixed Recovery (CM Recovery is present now).
[U]08-March-2016[/U]
-> Initial bringup
The best way to appreciate someone's work is by pressing that Thanks button
XDA:DevDB Information
UBER-CM, ROM for the Sony Xperia Z1
Contributors
drakonizer
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-03-08
Last Updated 2016-09-22
Reserved
STATE OF CAMERA:
As you may already be knowing, camera for Sony devices on Marshmallow is not stable yet. This is because Sony has decided to go open source (as much as possible) with the camera drivers. But don't worry, we've a lot of great developers working on it, and I have no doubt it will be stable very soon. Right now, the camera in this ROM is an indication of how much we've progressed.
Camera works for most parts at the moment. With the 22nd April release of the camera binaries, the camera seems to focus perfectly.
-> The rear camera has issues with low light photography, but in good lighting, pictures are really good.
-> The front camera is stable, and you can take decent photos in good lighting.
-> Camera works only with CM's Snap Camera app. Other apps have broken previews (which means WhatsApp web, Skype, and other such apps won't work).
Test it out and see if it's good enough for you. If not, well, you have been warned.
UPDATE 22/09: The latest build breaks the camera. THE CAMERA DOES NOT WORK. If you need the camera stay away. You're free to use the old build in which camera works as mentioned above
Reserved
Woah!
Great Work My Friend
Keep it up
thnx.!!!! you rock.!
One problem. When i charge phone to nighte , mornight is off. Sory my english.
topsecret78 said:
One problem. When i charge phone to nighte , mornight is off. Sory my english.
Click to expand...
Click to collapse
I'm sorry, I don't get your problem. Could you please try and describe it in a little more detail?
Sent from my Xperia Z1 (AOSP) using XDA Labs
drakonizer said:
I'm sorry, I don't get your problem. Could you please try and describe it in a little more detail?
Sent from my Xperia Z1 (AOSP) using XDA Labs
Click to expand...
Click to collapse
Maybe he's telling you that he has random reboot, while charging at night
Videocalls won't work bro
brickhayabusa said:
Videocalls won't work bro
Click to expand...
Click to collapse
As said in the OP, camera is a developer preview at the moment and we'll have to wait for Sony to bring in the improvements. There's nothing I can do.
Sent from my Xperia Z1 (AOSP) using XDA Labs
topsecret78 said:
One problem. When i charge phone to nighte , mornight is off. Sory my english.
Click to expand...
Click to collapse
Would you please say the problem you are facing in your language and we can translate it. I want to know if this is a bug or what!
@edit downloaded the stuff and fixing here, thanks for helping.
@Abu Badr, I just want to say that the phone falls into such a deep sleep that only a hard reset help, and after a few attempts.
topsecret78 said:
@Abu Badr, I just want to say that the phone falls into such a deep sleep that only a hard reset help, and after a few attempts.
Click to expand...
Click to collapse
I've never experienced this bug. If you can reproduce it, do a force shutdown by holding POW+VOL UP for 9 seconds and power on the device again. After that use http://forum.xda-developers.com/showthread.php?t=1520508 to get the last_kmsg and give it to me.
I know how to reset the phone, I forgot to do logcat. Just when I froze the night the phone later in the day time I am quickly changed the system because I was afraid that the route it gets.
Great rom. Thanks @drakonizer
Just one question, how to get root?
Edit: Got the root \o/
ROM updated to include March security patches and latest CM sources. Recovery is fixed now (only basic CM Recovery, sorry!).
See OP for download.
drakonizer said:
ROM updated to include March security patches and latest CM sources. Recovery is fixed now (only basic CM Recovery, sorry!).
See OP for download.
Click to expand...
Click to collapse
I think you are mistaken. CM has not merged (or posted) any March security updates yet. See here: http://source.android.com/security/bulletin/2016-03-01.html
None of those are in CM gerrit: http://review.cyanogenmod.org/#/q/cve
optimumpro said:
I think you are mistaken. CM has not merged (or posted) any March security updates yet. See here: http://source.android.com/security/bulletin/2016-03-01.html
None of those are in CM gerrit: http://review.cyanogenmod.org/#/q/cve
Click to expand...
Click to collapse
Please find screenshot attached.
Sent from my Xperia Z1 (AOSP) using XDA Labs
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. :P
* blah blah blah you get the point.
*/
This is a simple unofficial CyanogenMod 13 build with a few small tweaks and my custom kernel.
Builds are made with that day's nightly source code, with my roomservice. I try to keep my repos up to date.
How to install this:
Download this build (and MD5, if you want to verify integrity)
Download Gapps (Optional, I use OpenGAPPS Nano)
Download SuperSU (Optional, I use SuperSU Beta 2.74)
Reboot into Recovery
Wipe /cache, /data, and /system (Should only be needed on initial flash, upgrading should be seamless)
Flash ROM Zip
Flash Gapps Zip (Optional)
Flash SuperSU Zip (Optional)
Reboot & Enjoy!
How to build this (if you don't trust my builds, or want to DIY):
Sync CM13
Add my local manifest: https://github.com/javelinanddart/roomservice/blob/cm-13.0/roomservice.xml
Sync
Go to kernel/samsung/ (you may have to mkdir samsung folder, if it doesn't exist)
Clone my kernel manually into a folder called jf
git clone https://github.com/javelinanddart/android_kernel_samsung_jf -b cm-13.0 jf
Build
Make sure you manually git pull the kernel when you run a new build.
Bug Reporting:
Please read http://forum.xda-developers.com/showthread.php?t=1520508 & http://forum.xda-developers.com/wiki/Reporting_A_Problem_-_Android
before reporting any bugs. It is incredibly frustrating and useless to receive bug reports like "bt broke plz fix thx in advance....." without any other information. I would more than like to help fix your bug for you, but I cannot help without proper information.
Credits (off the top of my head):
CyanogenMod Team
@arter97
@show-p1984
and many more I can't think of off the top of my head....
Source Code:
Kernel: https://github.com/javelinanddart/android_kernel_samsung_jf
Local Manifest: https://github.com/javelinanddart/roomservice/blob/cm-13.0/roomservice.xml (for the rest of my repos)
OP Post List:
#1: Introduction
#2: Changelog
#3: Feature List
#4: Downloads
#5: Feature Explanations
#6: Known Bugs
#7: Reserved for future use
XDA:DevDB Information
Unofficial CyanogenMod 13 with Cake Kernel, ROM for the T-Mobile Samsung Galaxy S 4
Contributors
javelinanddart, CyanogenMod Team
Source Code: https://github.com/javelinanddart/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: NK2
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-06-02
Last Updated 2016-06-02
Changelog:
Aug 1, 2016
Sync with CM
Initial Rerelease
Cleaned Everything Up
Enable LiveDisplay by Default
June 7, 2016
Sync with CM
Fix 1080p Video Playback
Potentially fixed micro lag while scrolling
June 1, 2016
Initial Release
ROM Feature List:
Built with -O3 Optimization (GCC & Clang)
Built with UBERTC GCC 5.3 Toolchain
Built with Java 8
Some apk Optimizations (from @arter97)
Kernel Feature List:
Built with -O3 Optimization
Built with UBERTC GCC 5.3 Toolchain
Fsync Toggle
MSM_MPDEC
Bricked Thermal
CPU Toggle
IO Scheduler Optimizations
/dev/frandom Support
Gentle Fair Sleepers & Arch Power Toggle
MMC CRC Toggle
Dynamic Readahead
Lowered Swappiness
Aggressive Multi Core Power Saving
Simple GPU Governor
CPU Voltage Control
GPU Voltage Control
Fast Charge
Badass Governor
FIOPS I/O Scheduler
Sound Control
Backlight Dimmer
Disabled Input Boost
Added patch to fix Entropy Depletion
Potential Benefits of These Features:
Better Battery Life
Downloads:
NOTE: You will need to turn off ad block in order to download these builds. The wonderful Codefire team has provided me with access to this build server for free (thanks specifically to @thecubed) and in order to try to make it break even, they rely on ad revenue. @thecubed takes a loss on this server every month, so please help this guy to keep providing this wonderful service to developers for free. Thanks for understanding!
MIRRORS ARE NOT ALLOWED!!! (Mods: Please help me enforce this)
BUILDS PULLED
KNOWN BUGS:
Upstream CM Bugs
Micro Lag when Scrolling (Possibly)
You tell me....
Reserved 6
Reserved 7
javelinanddart said:
KNOWN BUGS:
Upstream CM Bugs
Micro Lag when Scrolling (Working on it)
You tell me....
Click to expand...
Click to collapse
Do you mind my asking if you are using this rom now or are you just working on it?
I would like to update to a 6.0 rom but don't really want to give up much functionality. I am using 5.1.1 and I do like it but would like the security updates of the newer rom while I decide which new device if any to purchase. Thanks
darazor said:
Do you mind my asking if you are using this rom now or are you just working on it?
I would like to update to a 6.0 rom but don't really want to give up much functionality. I am using 5.1.1 and I do like it but would like the security updates of the newer rom while I decide which new device if any to purchase. Thanks
Click to expand...
Click to collapse
I am both using it and working on it. As far as I know, all device features are fully functional (camera, GPS, IR, etc). Nothing I've tried has been broken, except the occasional google play services crash, which is Google's fault. As far as ROM features go, I haven't done much of a comparison with any LP ROMs.
To clarify, what I meant by working on it, I meant I was trying to fix that bug.
javelinanddart said:
I am both using it and working on it. As far as I know, all device features are fully functional (camera, GPS, IR, etc). Nothing I've tried has been broken, except the occasional google play services crash, which is Google's fault. As far as ROM features go, I haven't done much of a comparison with any LP ROMs.
To clarify, what I meant by working on it, I meant I was trying to fix that bug.
Click to expand...
Click to collapse
Thanks for the quick response. I am still on the MDL boot loader with OK3 base band is that a deal breaker?
Also is this compatible with xposed. I've read that they don't work well together. At this stage I could live without it but just for clarification and planning purposes. I like to have a path in my mind as I update.
darazor said:
Thanks for the quick response. I am still on the MDL boot loader with OK3 base band is that a deal breaker?
Also is this compatible with xposed. I've read that they don't work well together. At this stage I could live without it but just for clarification and planning purposes. I like to have a path in my mind as I update.
Click to expand...
Click to collapse
I've no idea with either, unfortunately. I've only ever had this phone with NK2 baseband, and I've never used Xposed, I've never had a use for it. Sorry.
javelinanddart said:
I've no idea with either, unfortunately. I've only ever had this phone with NK2 baseband, and I've never used Xposed, I've never had a use for it. Sorry.
Click to expand...
Click to collapse
I've spent the last several hours installing etc. This rom is GREAT! While I will have to test more, at this stage everything I've installed works perfectly and the bootloader/baseband doesn't seem to be an issue. Even AdAway has been perfect so far. I will expore the Xposed option later but if it isn't viable I can live very well with the current setup. I will report more unless someone else covers the topic. If anyone is hesitant to try this rom, don't be. Out of the box it is much more than I could have hoped for.
Disable adblock ?
Nope
Grudger said:
Disable adblock ?
Nope
Click to expand...
Click to collapse
1. Just to download the ROM
2. If you're not willing to help support the people who do this FOR FREE by turning off adblock for a few minutes, or even just on the download site, then realize that it's people like you who are going to cause free services to go extinct.
javelinanddart said:
1. Just to download the ROM
2. If you're not willing to help support the people who do this FOR FREE by turning off adblock for a few minutes, or even just on the download site, then realize that it's people like you who are going to cause free services to go extinct.
Click to expand...
Click to collapse
I just prefer donations and the thanks button
As soon as I try out the ROM though.
Grudger said:
I just prefer donations and the thanks button
As soon as I try out the ROM though.
Click to expand...
Click to collapse
I don't really care about donations, but the ad supported download page helps the owner of the build server I use, he gives it to me for free. I could not provide these builds if he wasn't so gracious as to let me use his build server for free. He consistently pulls losses from it, which makes it difficult to justify after a while. If you want to donate to someone (you'll still need to turn off adblocker on the download page, because he can't disable ads just for you unfortunetely), donate to @thecubed, it's his server.
javelinanddart said:
I don't really care about donations, but the ad supported download page helps the owner of the build server I use, he gives it to me for free. I could not provide these builds if he wasn't so gracious as to let me use his build server for free. He consistently pulls losses from it, which makes it difficult to justify after a while. If you want to donate to someone (you'll still need to turn off adblocker on the download page, because he can't disable ads just for you unfortunetely), donate to @thecubed, it's his server.
Click to expand...
Click to collapse
As I said before like this rom very much. Only issue so far is the standard CM bluetooth problem "Unfortuneatly bluetooth share has stopped". Are or have you been able to connect with BT?
darazor said:
As I said before like this rom very much. Only issue so far is the standard CM bluetooth problem "Unfortuneatly bluetooth share has stopped". Are or have you been able to connect with BT?
Click to expand...
Click to collapse
I unfortunately have not tested BT, and I don't really have any devices to test, except maybe connecting to my other phones. I will be out all of today, however I noticed a very annoying video playback bug that I will try to fix today.
New build is UP!
Changelog:
-Synced with CM
-Fix 1080p Video Playback
-Possibly fixed scrolling lag
Many thanks for your work on this ROM for our phones! :good::good:
Fingers xx'd that someday soon BT problems will be past us.
DISCLAIMER
Code:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Steps to install:
(0. Install any 6.0 rom)
1. Factory reset
2. Make sure you format /system and /data to ext4 for the install
2. Install ROM zip, you will get a warning about partition size change of system if its the first time you flash, just flash it a second time to confirm the change, this will erase your data partition!
3. Please do NOT install Gapps (you can still do it, but at your risks)
4. Reboot
5. Wait for a long time
Known Bugs:
- First boot is slow
- RIL sudden crash (?)
- Webkit render issues with the latest cm14.1. It will be fixed in the next build.
- CM's FileManager is bugged
Features:
- Stock Cyanogenmod 14.0
- Dirty CoW patched kernel (anyone cares ?)
- kernel built with GCC 6.2.1 with -03
- F2fs support on /data but not on /system
- Bigmem enabled (no cma for now)
- sdcardfs support to come someday
- Zram enabled
Please note that this rom is not ready for daily usage yet, it's an alpha.
Downloads:
Android 7.0:
http://www.mediafire.com/file/5d1fdr0f75rywml/cm-14.0-20161120-UNOFFICIAL-galaxysmtd.zip
Android 7.1.1:
http://www.mediafire.com/file/xfcjvn1y1vjwwpu/cm-14.1-20161223-UNOFFICIAL-galaxysmtd.zip
I will provide mirrors later if needed.
Please check the MD5 !
094fa2133073f22cea28e80d18a628e5
HUGE thanks to @xc-racer99 for his AMAZING work on his variant, without him, this woudn't have been possible at all.
XDA:DevDB Information
CyanogenMod 14.0, ROM for the Samsung Galaxy S I9000
Contributors
Coldwindofnowhere, xc-racer99, sooti
Source Code: https://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2016-10-28
Last Updated 2016-12-23
Reserved
Changelog:
23/12/2016
Android 7.1.1 r6
No more crashes due to the graphic driver
Working ril (except data on the first boot apparently ?)
Fixed internal storage issues
Updated kernel
Latest TWRP (without their new app, tell me if you want me to add it back)
20/11/2016
Latest CM 14.0
As people wanted, cmc is back
Tweaked art settings (lag should be gone)
Fixed video recording
Fixed MTP crash
Fixed adb authkey issue
Disabled SDcardFS
More stable RIL (but there are still issues with 3g)
28/10/2016
Initial release
Reserved
FAQ & tips :
Where is SuperSU ?
You don't need to flash SuperSU, just enable it under the Developer options.
How to change Bigmem modes ?
You can change it in advanced parameters>Bigmem
What are the best schedulers/governors/...
That's up to you, personaly, I like the combinaison of smartassV2 and bfq.
But ... how to change them ???
You can use Kernel Adiutor or any other app like that.
When will you release the next build ?
Don't ask for ETA ..... and wait.
Something isn't working, please fix it, please PLEASE
Logcat. No logcat == no fix.
If you don't know how to logcat properly, read this.
My phone is bootlooping ,what can I do ?
Pull battery and restart. Also don't forget to do a factory reset before flashing this rom.
Can you add X feature on your rom ?
No. I wont add additional features, this is stock cm. The only thing I might add is signature spoofing support.
Here are a few additional tips to get the most of this rom :
Format /data in f2fs in TWRP
OC your cpu if it can handle it
Use Bigmem
Don't install unnecessary apps
Remove apps from startup
(Wait for the next build)
Wow!!! It is impossibly! Big thanks!!!
+1
:good:
Link is up, make sure to check the md5sum and tell me if you experience issues.
Logcats appreciated !
Ok, just tested it. Was compared with AOSP 7 from x-racer99.
Seems CM14 more laggy in games. Not so smooth like an AOSP. But problem probably is not in the kernel. Cause i was also use x-racer99 kernel on your CM14 rom. Look at this videos with Mega Jump game:
https://youtu.be/ueyjuPu3BgA AOSP rom by x-racer99
https://youtu.be/FWbCNKZdAdE Cyanogenmod 14 rom with x-racer99 kernel.
Second video is not so smooth with a lot of jerks. May be problem in low memory killer settings, or GFX drivers, or V-Sync, or build.prop tweaks, i do not know.
Also i prefer CMC instead Voodoo Color. Because VoodooColor have two bugs since android 2.x.x. It is yellowish tint of all screen (CMC have more right white balance) and green bug on low backlight with high gamma settings, look at this video:
https://youtu.be/gkP7VgWbTlY
Thanks for the feedback, I guess that's related to various properties in build.prop. I will experiement a bit to see if I can improve this.
About CMC, you can tweak voodoo by yourself, but yeah if many people want me to switch to CMC, I will do it.
Coldwindofnowhere said:
Thanks for the feedback, I guess that's related to various properties in build.prop. I will experiement a bit to see if I can improve this.
Click to expand...
Click to collapse
You can just download Subway Surfer from market or another place and try to make run this game more smoother. Some times Subway Surfer have bad responce on touch and can hung up after long play. Also can try this on Mega Jump or other dynamic game.
Thank you!
Ok, one question. I know it takes forever on the first boot, but, how long does it take? I've been waiting almost 45 minutes for it...
First boot was around 15 - 20 minutes for me.
Bugreport:
-not all apps correctly work with sd-card. I cant scan cards by MXPlayer for example.
- camera can't save videos.
What are the libs used in the rom? Pathed for bigmem or regular?
P.S. Issue with MXplayer was resolved by itself after reboot phone.
M1n3cr4f7.G4m35.2015 said:
Ok, one question. I know it takes forever on the first boot, but, how long does it take? I've been waiting almost 45 minutes for it...
Click to expand...
Click to collapse
Um pull off the battery, start the phone again. Got this issue once but no idea why.
jupiter5700 said:
First boot was around 15 - 20 minutes for me.
Bugreport:
-not all apps correctly work with sd-card. I cant scan cards by MXPlayer for example.
- camera can't save videos.
What are the libs used in the rom? Pathed for bigmem or regular?
Click to expand...
Click to collapse
Bigmem patched, I haven't tested 720p videos tbh.
This rom can run on samsung wave?
thinhx2 said:
This rom can run on samsung wave?
Click to expand...
Click to collapse
I haven't tried but as it's really similar to the i9000, you should give it a try.
Coldwindofnowhere said:
I haven't tried but as it's really similar to the i9000, you should give it a try.
Click to expand...
Click to collapse
Screen is different. You think driver display of i9000 can work on wave?
thinhx2 said:
Screen is different. You think driver display of i9000 can work on wave?
Click to expand...
Click to collapse
Um having a quick look at https://github.com/Badadroid/android_kernel_samsung_aries, looks like it wont be possible, additional kernel drivers are needed.
Coldwindofnowhere said:
Um having a quick look at https://github.com/Badadroid/android_kernel_samsung_aries, looks like it wont be possible, additional kernel drivers are needed.
Click to expand...
Click to collapse
You can public your kernel for aosp 7 of ss s1?
thinhx2 said:
You can public your kernel for aosp 7 of ss s1?
Click to expand...
Click to collapse
https://github.com/Coldwindofnowhere/android_kernel_samsung_aries/commits/staging
No way man, nice work
Android 7 N for s1
Ejgjskfkcisvjj hahah
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous version of CM 13.0 (Wipe Cache and Dalvik Cache recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
Changelogs.
BUILD - 20161127
*make incall volume higher
*reduce min cpu
*audio fx still not fix
* asus pixel cam still not fix
*BFQ as default sched
*add core control
BUILD - 20161129
*New Kernel
*Fixed DT2W And OffScreen Gestures
BUILD - 20161201
*Kernel Updates
*Fixed Pixel Master Camera
*Fixed AudioFX
BUILD - 20161201
*Upstream Changes.
BUILD - 20161201
*Upstream Changes.
*Kernel Compiled With UBERTC.
BUILD - 20161201
*Upstream Changes And Device Related Changes.
Download links
Rom - https://www.androidfilehost.com/?fid=673368273298918967
Gapps - opengapps.org
Note - This isn't my work main developer of this project is audahadi so leave a like and support.
DONATION NOT NECESSARY BUT IT'LL HELP TO PAY SERVER BILLS.
Donate via PayPal - [email protected]
Credits
audahadi
luk1337
luca020400
Source
Device Tree - https://github.com/audahadi/android_device_asus_Z010D.git
Common - https://github.com/audahadi/android_device_asus_qcom_common.git
Vendor - https://github.com/audahadi/android_vendor_asus_Z010D.git
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Asus ZenFone 2
Contributors
ShadowReaper1, audahadi, luk1337, luca020400
Source Code: https://github.com/kernel-hut/android_kernel_asus_Z010D.git
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Marshmallow Bootloader/Modem
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-11-24
Last Updated 2016-12-26
Reserved
SOME RULES
PLEASE USE GIVEN SECTIONS ABOVE TO SORT EVERYTHING YOU HAVE IN YOUR MIND FOR EXAMPLE IF YOU WANT TO REPORT A BUG USE BUG REPORT SECTION ANY BUG REPORTS GIVEN IN THE COMMENT SECTIONS WILL BE IGNORED SAME GOES FOR EVERYTHING.
First Read The OP And Use The Search Box To Find Your Issue There's A Chance That Somebody Already Might Have Faced The Same Issue Before And Fixed It.
Bug reports:
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
LED Light May Not Work Properly Sometime.
Off charge doesn't work if your battery dies(switch off when goes to 0%) use recovery mode or fastboot mode to charge your phone for 15-20mins then power it on.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Reserved
Marshmallow Bootloader/Modem
If you are using stock lollipop rom then you must flash any stock marshmallow rom before upgrading to CyanogenMod else it won't boot.
it said the some 3rd camera apps may not work but other do right? and is the usb otg is ???? still working ???
How's the vpn on this rom?
phericaaaa said:
it said the some 3rd camera apps may not work but other do right? and is the usb otg is ???? still working ???
Click to expand...
Click to collapse
Yes Usb Otg Is Working.
sLipamin said:
How's the vpn on this rom?
Click to expand...
Click to collapse
We didn't test any vpn but you can try and revert back here.
Is it working at Zenfone Max with Snapdragon 410?
hitman128 said:
Is it working at Zenfone Max with Snapdragon 410?
Click to expand...
Click to collapse
Yes, it is for Zenfone Max SD 410
ShadowReaper1 said:
We didn't test any vpn but you can try and revert back here.
Click to expand...
Click to collapse
password file fix, pls
This is going to be awesome... so much thank you for the developer for this. do you guys have website so we can help you out by clicking ads... donate will do as well for keeping this on going project
ShadowReaper1 said:
We didn't test any vpn but you can try and revert back here.
Click to expand...
Click to collapse
how about app2sd and init.d support?
Nice job. But, This should be in the development forum. Not the general one.
Sent from my Zenfone 2 using Tapatalk
hi I can't seem to update it with my 5.0.2 ... i searched somewhere it needs a prerequisite wihich si a MM build before flashing to CM 13 MM
khiya said:
hi I can't seem to update it with my 5.0.2 ... i searched somewhere it needs a prerequisite wihich si a MM build before flashing to CM 13 MM
Click to expand...
Click to collapse
M bootloader is a mandatory
Sent from my Z010D using Tapatalk
pls help me
link download have been died pls help me
hatdua93 said:
password file fix, pls
Click to expand...
Click to collapse
No need password idk what are you talking about
kenbo111 said:
Nice job. But, This should be in the development forum. Not the general one.
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Since Zenfone Max Has No Development Forum And It's A Phone From Zenfone 2 Series That's Why We Are Created This Thread In General Forum I Think It Would Be Wrong And Confusing If We Start Posting In Development Forum.
audahadi said:
M bootloader is a mandatory
Sent from my Z010D using Tapatalk
Click to expand...
Click to collapse
thanks... finally working using bootloader from 6.0.1 BETA
khiya said:
This is going to be awesome... so much thank you for the developer for this. do you guys have website so we can help you out by clicking ads... donate will do as well for keeping this on going project
Click to expand...
Click to collapse
Thanks but no thanks if you want you can leave a like
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for unofficial LineageOS 14.1 builds for Xiaomi Mi Note 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
you tell me
Hint:
As Xiaomi hasn't released kernel source for the device, this ROM uses prebuilt kernel from stock
Before flashing this ROM, make sure you've installed MIUI9(the latest is recommended)
Currently kernel&blobs are pulled from miui_MINote3_8.3.8_6a211e88cf_7.1
Changelog:
2017/12/17:
Initial release
2018/02/03:
Sync latest LineageOS source
Switch to OSS kernel, based on LA.UM.6.1.r1-11600-sdm660.0
Allow swapping app switch key and back key
Pocket mode
Allow disabling capacitive keys and enabling virtual keys
Livedisplay CABC & color enhancement
sdcardfs
Switch to bfq I/O scheduler
2017/02/05:
Sync latest LineageOS source
Fix mic when recording videos
Workaround time_daemon crash after applying pti patches
2017/03/10:
Sync latest LineageOS source
Update kernel to CAF LA.UM.6.1.r1-12000-sdm660.0
Fixed unbanlanced irq for fpc fingerprint sensor
Fixed battery stats
Update proprietary blobs
2017/03/14:
Sync latest LineageOS source
Misc kernel fixes&improvements
More robust fingerprint sensor detecting
Fixed green screen in Snap video mode
Fixed NFC firmware downloading
2017/03/16:
Sync latest LineageOS source
Fixed widevine DRM
2017/03/18:
Sync latest LineageOS source
Fixed quick charge
Set GPU idle freq to 160MHz
2017/04/22:
Sync latest LineageOS source
Fixed tethering
Pulled blobs from latest MIUI dev
2017/04/23:
Fixed wifi when secure boot enabled
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (https://forum.xda-developers.com/android/development/recovery-unofficial-twrp-3-0-3-0-touch-t3716806 is recommended)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://androidfilehost.com/?fid=746010030569970581
XDA:DevDB Information
LineageOS, ROM for all devices (see above for details)
Contributors
dianlujitao
Source Code: https://github.com/MiNote3Dev
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Version Information
Status: Snapshot
Created 2017-12-17
Last Updated 2018-04-23
Xiaomi has released the kernel source of jason, will you continue to support this? @dianlujitao
Thank you and looking forward on your response.
chonghua said:
Xiaomi has released the kernel source of jason, will you continue to support this? @dianlujitao
Thank you and looking forward on your response.
Click to expand...
Click to collapse
I'll release a new build with OSS kernel and bug fixes&new features soon.
dianlujitao said:
I'll release a new build with OSS kernel and bug fixes&new features soon.
Click to expand...
Click to collapse
Why arent you make a thread for mokee rom? Sorry if my question isnt related with this thread.
Amazing job!
I've flashed the latest version and tested it today. Runs really really smooth. Amazing job! :good:
There is a problem with the internal mic(s). It works only for sim calls. I tried recording a video and also I did a video call but there was no audio recording from the mic(s). But instead I connected a headset, and the mic audio from the headset worked.
I'll still use this rom as my daily driver, I just can't stand MIUI!
Looking forward for future updates
Home button doesn't work
I tried this rom and the home button doesn't work.
Gabriele1311 said:
I tried this rom and the home button doesn't work.
Click to expand...
Click to collapse
For me it works, but sometimes it doesn't. I relock the phone and then it works again. Weird
LordTonoicu said:
For me it works, but sometimes it doesn't. I relock the phone and then it works again. Weird
Click to expand...
Click to collapse
Maybe pocket mode doesn't work well with fpc fingerprint sensor. My device uses goodix so I blindly implemented for fpc.
When screen is black and proximity sensor is covered, fingerprint sensor will stop work, this is expected behavior. Can be disabled in Settings->Additional buttons. goodix works as expected but idk how it works with fpc.
Thank you for making the rom. Hope Mi Note 3 will have the sub forum soon!
dianlujitao said:
My device uses goodix so I blindly implemented for fpc.
Click to expand...
Click to collapse
My fpc scanner/button does not work at all.
Also safetynet test fails on CTS profile.
dianlujitao said:
I'll release a new build with OSS kernel and bug fixes&new features soon.
Click to expand...
Click to collapse
Thank you very much for responding mate! More power!
It is possible to use stock camera with portrait mode. Google camera don't work properly
This is so great! thanks @dianlujitaon.
Great Work, Thanks @dianlujitao
dromaczek said:
It is possible to use stock camera with portrait mode. Google camera don't work properly
Click to expand...
Click to collapse
It is possible if it is ported to LOS14 of this device.
LordTonoicu said:
For me it works, but sometimes it doesn't. I relock the phone and then it works again. Weird
Click to expand...
Click to collapse
I reinstalled a lot of times this Rom, I updated to latest version (05/02) and the home button doesn't work...Are there more than one button model?
dromaczek said:
It is possible to use stock camera with portrait mode. Google camera don't work properly
Click to expand...
Click to collapse
Hey there, I flashed this https://forum.xda-developers.com/showpost.php?p=74893764&postcount=1431 and it works, kinda. I mean the portrait mode works , but right after you take the photo, the app crashes but the photo is still saved.
Update: I flashed the latest version (05/02) and the mic works. I also deactivated "Prevent accidental wake-up" and the fingerprint works all the time, and also the battery life seems to have improved, or it might be just me
Amazing job. Thanks a ton @dianlujitao !
Hi, i installed latest nightly.. Look this video i took. LTE signal bar is dropping up and down..
https://youtu.be/SWmGAbbzwi0
What is not working in the last version of the rom?
Thanks a lot
xtreme97 said:
What is not working in the last version of the rom?
Thanks a lot
Click to expand...
Click to collapse
Everythig exept photo is ok,
PHOTO: dont work portret mode, dont work zoom 2x etc. No port of Mi Camera. Unusable cause cant use photo dual camera. No sense to install then. Dont do it, cause you cant use photo dual camera!