{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I decided to make a all in one post for the edge plus. Everything posted here works with Ok3 and below! Chance of hard brick is slim, use everything at your own risk!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Root:
Make sure you enable OEM Unlock in developer's option and never unchecked it or you will be in a boot loop!
Install TWRP See Below First.
Place on Sdcard
Reboot In recovery
Flash root zip
Reboot
Download Root Kernel:
Download Here
Cf root I heard could root the edge+ with oem checked but I prefer the custom kernel.
Cf root:
Click Here
Will trip knoxs
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
TWRP:
Download & Install Drivers:
(Download Here)
Download Odin:
(Download Here)
Unzip
Place Twrp tar in AP
Reboot Phone into download mode (Hold Power+Volume Down+Home)
Uncheck reboot
Click Start
Reboot done!
Download TWRP:
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Roms:
Marshmallow:
None Yet
Lollipop:
Defender:
Click Here
TW Slim:
Click Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Kernels:
Flash in TWRP:
Stock Kernel:
Download Here
Beast Beta:
Download Here
Odin Flash:
Unikernel (Flash in Odin AP slot):
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Xposed:
Download files
Place both of phone
Install apk on phone
(Make sure unknown sources is checked)
Reboot in recovery and flash zip
Reboot
Done
Xposed apk: Download Here
Xposed zip: Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
HotSpot Patch:
Non-Root:
Get your MSL from Sprint: Get on live chat with sprint on there website. Tell them you need your msl to reset your GPS. If that person tells your no or they can't help you refresh the page and try again with someone else. I had to do it twice!
Dial ##data#
Click Edit
Go down to APN Settings and click it
Edit EHRPD & LTE
In each click APN type
Change it from default,mms,dun
without any spaces after dun or it won't work.
Click More in the top right hand corner in each
(EHRPD & LTE)
After you change the setting and click Save.
(If you do not save in each selection it will not work!)
After saved in each reboot.
Supports Most galaxy LTE devices from sprint!
---------------------------------------------
Deodexed Only (Root):
Reboot in recovery
Flash Zip
Reboot
Done!
Download:
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SPRINT! Note 5 Rom Patch & True Edge (Full s6 edge)
(OK3 & below):
This will make it so any TW base Sprint Note 5 roms can be flashed to the edge plus!
Fully working with data, call, etc & you can add edge as well.
Don't worry about baseband or anything, just make sure it's a lollipop rom!
How to:
Download a sprint note 5 rom & patch
Place both on SD card
Reboot in recovery.
Wipe device 3x
Flash rom
Don't reboot
Flash patch + edge people zip
Reboot
Profit
Note 5 Patch only:
Download Here
True Edge (Full edge): Click here
Note 5 roms:
Click HereXxxxxxxxxxxxxxxxxxxxxxxX
Old:
Download Note 5 patch plus edge people included (Updated: 12/04/15):
Deleted
-----------------------------
Can I install t-mobile/Verizon/At&t/etc edge plus & note 5 rooms with this patch?
Yes, but there will be no data/calling/text/mms. Everything else will work fine though.
Can I flash a marshmallow rom with this patch?
No, this only supports all lollipop roms on the Sprint note 5.
What is the patch?
It's a modified kernel to allow everything to work properly on the edge plus.
Will this work with the edge roms as well?
Not sure, but doubtful. I will be testing soon. The Note 5 is the same hardware as the edge plus and that's why you can flash the roms. The patch just fixes the hardware keys with a couple other issues.
Does this work with ok3 update?
Yes, the patch works with ok3 and below.
----------------------------------
Change log:
12/04:
Combine Edge & Patch
Fixed hardware keys
Updated script
Fully supports OJ6 & OI6
For 5.1.1 and baseband currently released as of OJ6 and lower
- - - - - - - -
11/23:
First release
Don't not flash any kernels from note 5 or you will have issues.
Just roms from the note 5!
Don't flash rom without patch or you will have problems.
Risk of brick is very slim and worse case you will be a bootloop, so make sure you make a backup to restore just in case.
Do not flash aosp roms when they come out for the note 5. I will try to make another patch for them.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Firmware & Update and Keep Root:
AOK3 and below can be downgraded and rooted. These are no wipe tars.
Download Odin:
(Download Here)
Download & Install Drivers:
(Download Here)
Reboot Phone into download mode (Hold Power+Volume Down+Home)
Place file in AP
Click Start
Reboot and Done
Update firmware & keep root:
Backup current rom
Odin latest firmware
Reboot in download mode
Flash twrp without auto reboot checked
Hold volume down+power+home
As reboot takes place hold
Volume up+power+home
Restore backup
Downloads:
AOK3:
Download Here
AOK3 Mirror (Faster download):
Download Here
----------------
Old:
AOJ6: Still Looking For It
AOI6:
Download Here
AOG6:
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Unbrick Tars W/TWRP:
AOK3:
Download Here
Pit:
Download Here
I recently had brick my phone and couldn't enter recovery even after I flashed the stock tars.
I made this in case someone else has that issue. This will also give you TWRP pre-installed, so that you can restore a old backup or flash a rom.
Just make sure to uncheck auto reboot in odin and reboot into TWRP twice.
Place Tar in AP of odin
place pit in pit tab area
Reboot and download mode if possible
Start
Reboot and done!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Live Tv/Shows/Movies:
Download File
Unzip 3 files
Copy files (not the folder that you unzipped) to titanium back up folder
Refresh Apps in TB
Click Kodi and Restore
Open Kodi
Goto Chris B Wizard
Click The Beast 1.0.4
After download and installed, force close the app(don't click anything else)
Start Kodi
Done!
Download:
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Changing Boot Animation:
Goto Media folder in System
Delete or Rename to .bak:
Spr Boot and Loop
Samsung Boot and Loop
Copy new Boot and Loop from zip in List Link to media folder
Make a copy and rename then to both the SAMUNG BOOT & LOOP AND THE COPY SPR BOOT AND LOOP FILES.
Make sure the name is renamed as the file before that you renamed
Copy audio file to (Poweron.ogg) System/Media/Audio/UI
Replace or delete old file
Change all files copied permission to:
rw-r--r--
Only have Checked:
Read- Owner/Group/Others
Write- Owner
Thats it just reboot!
List of QMG Boot Animations:
Click Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Sound Boost:
Reboot in TWRP
Flash zip
Reboot
Download:
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Surround sound mod:
Supports
AOK3 and below
Download
Place on internal memory
Reboot in twrp
Flash
Reboot
Download:
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
420 Dpi Mod:
Reboot in TWRP
Flash zip
Reboot
Download:
Download Here
STOCK DPI:
Download Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Fix Netflix and Hulu After Root:
Get Root Browser from playstore
Goto "liboemcrypto.so" file under /system/vendor/lib
Rename that file or delete
Reboot
Done
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Remove Sprints Proxy:
Gain msl (See Hotspot Patch)
Dial ##data#
Click edit
Enter msl
Goto multimedia
Change RTSP & HTTPPD Proxy address to: 0.0.0.0
Reboot
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
THEMES:
Just click the link and follow instructions
Click Here
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
All Files Index:
Click here
Works like a charm brotherman thank you for all your hard work
aznxstylez said:
Works like a charm brotherman thank you for all your hard work
Click to expand...
Click to collapse
No problem.
aznxstylez said:
Works like a charm brotherman thank you for all your hard work
Click to expand...
Click to collapse
Just added a link to add edge.
I pm'd you
So I can use any note 5 rom?
Sent from my SM-G928P using Tapatalk
nowerlater said:
So I can use any note 5 rom?
Sent from my SM-G928P using Tapatalk
Click to expand...
Click to collapse
Yes but only from sprint note 5. If you use t mobile or AT&T you won't have signal. Verizon I'm not sure yet because there are no roms for it yet.
But since I'm having issues with the Moar developer we may have only this way to flash note 5 roms. I will not be porting anything over for this device unless he pm's back with permission.
Well hopefully he does, thanks to you we even have ports for this phone
@GamerOnOne PM sent
Sent from my SM-N920P using Tapatalk
joedaddyoo said:
Well hopefully he does, thanks to you we even have ports for this phone
Click to expand...
Click to collapse
I mean I did put up an update to Moar in dev host but I'm not aloud to post it here but if you go into any of my downloads you can navigate to the Moar folder.
I can't find the folder. When i click roms it goes to dev host but can't find anything...
Sent from my SM-N928P using XDA Free mobile app
The link for the new file only downloads a file of 200+kb. The
Link for you files doesn't work either. Could you please repost and re-upload.
Thanks!
GamerOnOne said:
I mean I did put up an update to Moar in dev host but I'm not aloud to post it here but if you go into any of my downloads you can navigate to the Moar folder.
Click to expand...
Click to collapse
Code:
Note 5 Patch Plus Edge-N928P.zip (14.79 MB)
Report FileUploaded By:
Uploaded On: 2015-12-04 21:55:59
Downloaded: 17
MD5 Sum: a32e5a3ad5ad911bf47f671544bdfb09
Virus Status: Scanned Clean by ClamAV & Sophos
You need to re-download the file. You have a corrupt download. Try a different browsers (cm browser) or download to a pc and transfer it.
@GamerOnOne you think the patch would work with a regular sprint s6 edge rom?
ok3
Will this work with ok3
richardjas4444 said:
Will this work with ok3
Click to expand...
Click to collapse
Yes. I'm currently running the Note 5 M-O-A-R rom using this method on OK3.
Hell yes! I was hoping there would be some roms up on here. This is almost just as good! Thank u. Gonna flash a new rom on here tomorrow. How's the moar rom?
Does flashing the ok3 update unroot?
Kstambaugh09 said:
Does flashing the ok3 update unroot?
Click to expand...
Click to collapse
Moar is the s**t.... I had the stock modded like crazy but Moar alond with xposed has made my edge+ by far the best phone i ever had. Just wish some developers would jump over here and help us out. The one we had jumped ship
Kstambaugh09 said:
Does flashing the ok3 update unroot?
Click to expand...
Click to collapse
Yes, but you can re-root and flash TWRP and you're back in business.
Related
................................
2013-07-21 -->> OP update links for download file UPDATE-SuperSU-v1.41.zip.
2013-06-22 -->> OP update links for download file UPDATE-SuperSU-v1.34.zip.
2013-06-08 -->> OP update links for download file UPDATE-SuperSU-v1.32.zip.
2013-06-03 -->> OP update links for download file UPDATE-SuperSU-v1.30.zip.
OP update links for put CWMv6: Direct download CWMv6 (recovery.img) by williegomezt.
For new JB V07 update: Direct download drivers and SP_Flash_Tool_exe_v3.1224.01.
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
You searched if there is someone who managed to ROOT your device here in xda?
Root MANY ANDROID! [Upd: 24.04.2013]
I'm also on other forums and had been trying to help a friend who needed to ROOT [BLU Tank 4.5] that has fastboot mode.
[TUTORIAL] Root Blu Dash 4.0
We try ROOT through this process and believe that you can try too. So I do not have these devices, and you must read a lot before making a decision. Before any procedure must have stock ROM or at least a backup of it.
BLU Dash 4.0 has [Chipset Qualcomm MSM8225 Snapdragon]. Furthermore, this procedure Super_Su did not work for with the original recovery BLU VIVO 4.3 ROM JB 4.1.1. With recovery original it says "Installation aborted".
Blu Vivo 910a Jelly Bean generic Rom- How to root
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.25.zip
[03.03.2013] SuperSU v1.25 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.25.zip]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
When you restart the phone, mark in ---> configuration ---> Security --> Unknown sources.
For more details see my other Thread --> Loss IMEIs
So you now have installed a upgraded SuperSU-v1.25.
This it! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.25.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
bluvivo said:
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
Click to expand...
Click to collapse
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Download links are directly updated in the forum.
lopestom said:
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Update links direct in forum.
Click to expand...
Click to collapse
Thanks but there to I get the recovery.img file? The Flash Tool I have.
bluvivo said:
Thanks but there to I get the recovery.img file? The Flash Tool I have.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
lopestom said:
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
Click to expand...
Click to collapse
Correct procedures to install the drivers.
bluvivo said:
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
Click to expand...
Click to collapse
What system you are using Win XP/Vista/7/8?
I'll pass the correct procedures to install the drivers:
On the computer:
Go to the Drivers folder and run "InstallDriver" (for the file I'm sending you).
On your device:
Connect the device to your computer, go to Settings, Options programmer, Activate and check "USB Debugging" and press OK.
On your computer:
1 - Go to device manager, click on unknown device or wrongly recognized (MT65XX Preloader);
2 - MT65XX Preloader updating drivers, click browse for driver software on this computer;
3 - Type of Device, click Show All, and then click Have Disk and browse to the folder "Driver\ADB" and select the file [android_winusb.inf];
See this image for [android_winusb.inf]:http://forum.xda-developers.com/showpost.php?p=38864558
4 - Select Android Composite ADB Interface;
5 - If message appears, requesting confirmation to install, confirm, appear to Windows Security box, asking if you want to install Google Inc, Select Always Trust and install;
6 - Now just do the procedure in SPFT to put only the recovery (CWMv6).
Remember that with Win7 installations should always be run as administrator!
Check this with @tanmay5 in mmxA110 #38 ------->>>> http://forum.xda-developers.com/showthread.php?t=2167244&page=4
For Win8 disable UAC:
3. open control panel in win8 the metro you one not classic one. I think u all might be knowing how to go there.
There click on general tab then click - advanced startup n press restart.
then go to troubleshoot option in press option 7 i.e disable driver signature. Thats the most Important step.
4. your pc will get restarted null enter in the in that option.
5. your UAC (User Account Control) must be enabled atleast to the recommended level/2nd one from the top.
Click to expand...
Click to collapse
This is information within [VIVO 4.3 Tool\Driver_Auto_Installer\Driver_Auto_Installer]:
Driver_Auto_Installer_v1.1208.00
ReadMe.txt
Click to expand...
Click to collapse
Code:
This application will install USB com port driver for MediaTek's device those IDs are listed below:
1."VID_0E8D&PID_0003" (FeaturePhone & Smartphone BootROM - MTK USB Port)
2. "VID_0E8D&PID_0023&MI_00" (FeaturePhone - MTK USB Modem Port)
3."VID_0E8D&PID_0023&MI_02" (FeaturePhone - MTK USB Debug Port)
4. "VID_0E8D&PID_2000" (SmartPhone - PreloaDer USB Port)
5. "VID_0E8D&PID_2001" (SmartPhone - DA USB Port)
6. "Vid_0E8D&PID_2006&MI_02" (SmartPhone - Kernel Gadget USB port, Please customize your kernel VID/PID)
"Vid_0E8D&PID_2007"
"Vid_0E8D&PID_200a&MI_02"
The application user must belong to Administrator group or have the privilege to install driver.
the execution of the InstallDriver.exe will install the driver, and the UninstallDriver.exe is special for remove driver.
the InstallDriver.exe will remove the legacy version of driver before install current driver automatically.
Notes:
1. Windows 2003 use the INF files which under the 2K_XP_COM
2. The device which generates two com ports (USB Modem Port Driver & USB Modem Debug Driver) only support Systems after Win XP sp3 version.
If you want to support these devices in Win XP Sp2, add these patchs:
http://support.microsoft.com/kb/918365/
http://support.microsoft.com/kb/935892/
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.34.zip
[03.03.2013] SuperSU v1.34 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
Works for both models BLU VIVO 4.3 - D910a and D910i. If you are not with this device, then you should search or create CWM for your own device.
For put CWM v6 in BLU VIVO 4.3 see this: HOW TO PUT CWM v6.0.1.2 by williegomezt
For more details to put "recovery.img" using SPFT see Flashing only part of the ROM: [TUT]MTK Android (Sp flash tool ) tutorialhttp://forum.xda-developers.com/showthread.php?t=1982587
Download SP_Flash_Tool_exe_v3.1224.01 and INSTALL drivers: VIVO 4.3 Tool 20130322.rar
On your device ---> configuration ---> Security --> check the option=> Unknown sources.
Instructions after putting CWMv6: With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.34.zip]
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
So you now have installed a upgraded SuperSU-v1.34.
That's all! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.34.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
rederikus said:
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
Click to expand...
Click to collapse
This is something related to installing drivers. Another interesting case is USB plug behind the PC.
Check this for more drivers MT6577. Download your version for SO (W8/W7/Vista/XP )--> [TUT] Instructions MTK6577 USB VCOM Driver Installation
I read in other posts that you have Win8 and this is not good. But many friends managed. Read post # 10, disable UAC, see picture of correct installation and try again. See this for correct install drivers: http://forum.xda-developers.com/showpost.php?p=38864558
Another attempt is to use scatter file this on my forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Download the BLU_D910i_V06_GEN_T8113_20130322_CWM.rar, unzip. In SPFT, select only the option [RECOVERY].
Root blu dash 4.0
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
zachpainter77 said:
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
Click to expand...
Click to collapse
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
BLU Users Unite
lopestom said:
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
Click to expand...
Click to collapse
y this is a good idea . . . There is not enough support for BLU devices out there . . .
ROOT in BLU VIVO 4.3 - JB 4.1.1 - without using SPFT
Hello I did otherwise the root device of people who do not know or do not want to use SPFT.
So read the instructions well and be happy. I researched other ways, but just found this one with Chinese software. Remember: It will install an application Chinese. But I made a tutorial that this app can be removed later.
TUTORIAL ROOT in BLU VIVO 4.3.pdf
VRoot_1.2_Setup.rar
Or see more images here: Guide - How to Root BLU VIVO 4.3 with JB 4.1.1
HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910a
"Follow my instructions:
- Start again with a new download of the official file.
The battery must be at least half the load.
1. Visit the website: blu.kiwibed.com You must enter the username and password to access the folders
Username: blusoft
Password: aplic10
2. Enter the folder Aplic Software / Software Vivo 4.3 generic.
3. Select the model of your phone (BLU-D910I or BLU-D910A)
4. Download the zipped file on your computer
5. After downloading the file, upload it to the direct sdcard. No need to unpack
6. Turn off the phone and turn it back on leaving the keys pressed simultaneously volume + and power.
7. Menu will appear in the android recovery. With the volume buttons you browse options in this menu and the power button validates the selected option.
8. Appear => Execute/Press --> Wipe factory
9. Appear => Execute/Press --> Wipe cache
10. Choose the option: "apply update from sdcard"
11. Browse by sdcard and choose the file you downloaded.
12. Then the phone will restart and update the new version of android."
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Fherby said:
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Click to expand...
Click to collapse
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
lopestom said:
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
Click to expand...
Click to collapse
Sorry for writing my comments in the wrong place. Anyway, thanks for the additional info you've provided.
Because the SM-N910W8's hardware is identical to the SM-N910T (they're both labeled SM-N910T under the battery), with some slight changes, the SM-N910W8 stock firmware will run flawlessly on our T-Mobile variant.
There two parts to this post: the first part has a pre-made flashable version for those who just want something working. The second part explains how to port it yourself starting from the stock Odin tar.md5 archive.
Enjoy!
Flashable version
Factory reset
Flash the flashable Canadian N910W8VLU1BOC4 stock ROM from https://mega.co.nz/#!Qwp3WQAC!c_CaIGo-1HOjiRQYfJjC2PYc5il3mgAEctNW52YBK_U
Flash SuperSU
Reboot
Set up the T-Mobile APN (see: https://support.t-mobile.com/docs/DOC-14688#apn_settings) OR flash the T-Mobile CSC (see below).
Porting and installing manually
Download the Canadian N910W8VLU1BOC4 stock ROM from https://mega.co.nz/#!hxYXzYhJ!M_KCVikSc4iETI4mjAzlZSqHXCrtXYJeElzv9xZpPgI
If you want, you can download a different version from http://sammobile.com or http://samsung-updates.com because we will discard the CSC carrier modifications.
Extract cache.img.ext4 from the Odin tar.md5 archive and extract recovery/sec_csc.zip from that ext4 image.
On Windows, you can do this by using CacheRipper: http://forum.xda-developers.com/gal...t/tool-cache-ripper-unpack-cache-img-t1702861
On Linux, you can do this by downloading simg2img (or compiling it from AOSP) and then running:
Code:
simg2img cache.img.ext4 cache.img
mkdir mnt
sudo mount -o ro cache.img mnt
cp mnt/recovery/sec_csc.zip .
sudo umount mnt
rmdir mnt
Open sec_csc.zip and remove the following directories and files. We don't want any of the carrier customizations, so only the language files are kept. They are needed for SNote and Action Memo.
system/csc
system/etc
system/CSCVersion.txt
system/SW_Configuration.xml
Open META-INF/com/google/android/updater-script from sec_csc.zip and add the following to the top.
Code:
mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system", "");
Remove all images except for "system.img.ext4" from the Odin tar.md5 archive (keeping the *.mbn files will hard brick your device! Don't do it!)
Factory reset
Flash the new tar.md5 (containing only system.img.ext4) using either Odin or Heimdall
Reboot into recovery
Flash the modified sec_csc.zip
Flash my patched kernel from https://noobdev.io/canada/Kernel_N910W8VLU1BOC4_Patched.zip.
This is the stock kernel, but with tima and dmverity disabled, the CONFIG_SEC_RESTRICT_* options disabled, and a patch from CyanogenMod added to allow brightness adjustment on our old 4.4 bootloader. The GPL kernel source is linked below.
Flash SuperSU
Reboot
Set up the T-Mobile APN (see: https://support.t-mobile.com/docs/DOC-14688#apn_settings) OR flash the T-Mobile CSC (see below).
Set "ro.securestorage.support" to false in /system/build.prop (or else WIFI passwords won't persist across a reboot)
Disable SecurityLogAgent with TitaniumBackup or delete /system/app/SecurityLogAgent to remove the KNOX notification.
GPL Kernel source is here: https://github.com/chenxiaolong/Note4Kernel
T-Mobile CSC
NOTE: Please do not flash this if you've already booted into the ROM once. The OS doesn't seem to like the IMS settings being changed behind its back (ie. you'll see some force closes for the IMS daemon).
By flashing the T-Mobile CSC, this ROM will act as close to the stock T-Mobile firmware as possible. This means APNs, VoLTE network settings, and so on will automatically be configured. Note that because of carrier customizations, some features will disappear, such as the +/- 5 auto brightness adjustment and foreign language sorting in the Contacts app. It is NOT required to flash this package if you don't want to.
This package will also change the build.prop to read "trltetmo" and "SM-N910T" instead of "trltecan" and "SM-N910W8", respectively.
TMB CSC Download: https://mega.co.nz/#!dhghAQRa!aKetMD6FjzfyR6gCyDSdHF1972NrUUTXvS9hP1Yjw-8
Source files: https://github.com/chenxiaolong/Note4CSC
Screenshots:
XDA:DevDB Information
Unmodified port of SM-N910W8 Lollipop for SM-N910T, ROM for the T-Mobile Samsung Galaxy Note 4
Contributors
chenxiaolong
Source Code: https://github.com/chenxiaolong/Note4Kernel
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2015-04-05
Last Updated 2015-04-04
Reserved
Reserved
You deserve a LOT of thanks. I'll start. :good:
I'm running this build on my T-Mobile N910T right now and I can confirm three things:
1.) There are no issues with SuperSU prompt
2.) After install I only had to add my APN (chenxiaolong edits securestorage to false during install for WiFi passwords)
3.) Auto-brightness is working perfectly
There are no issues that I have encountered on this build with a clean wipe on TWRP 2.8.6.0 (latest). :good:
Nice as always
Much love.
Btw thanks for the guide on the porting! One more thing to slap on my knowledge and hopefully it will open some room for development while we wait around on tmobile
Much appreciated!
thank you. works flawlessly for me =)
Tips for Best Results
-Clean install (no dirty flashing between builds, Lollipop or not)
- Download latest flashable SuperSU HERE and install it after the ROM and before you reboot!
After it boots let the screen turn off on its own before running setup and logging in
- Add an APN to fix "No data" for US T-Mobile users: Go to Settings > More Networks > Mobile Networks > Access Point Names and click the "+" in the upper right. Follow the link in step 5 of the OP for filling in the boxes.
-Freeze S-Voice and clear data with your favorite app to get back "OK Google" command.
-Activate and use Viper4Android and Wakelock Detector with Root privilege (credit: Mcdavid)
Install SELinuxModeChanger and change to "permissive"
I'll add more as I find them.
AlkaliV2 said:
Tips for Best Results
-Clean install (no dirty flashing between builds, Lollipop or not)
- Download latest flashable SuperSU HERE and install it after the ROM and before you reboot!
- After it boots let the screen turn off on its own before running setup and logging in
- Add an APN to fix "No data" for US T-Mobile users: Go to Settings > More Networks > Mobile Networks > Access Point Names and click the "+" in the upper right. Follow the link in step 5 of the OP for filling in the boxes.
-Freeze S-Voice and clear data with your favorite app to get back "OK Google" command.
I'll add more as I find them.
Click to expand...
Click to collapse
Installing SELinuxModeChanger and changing to "permissive" makes Wakelock Detector and Viper work right on this.....
mcdavid said:
Installing SELinuxModeChanger and changing to "permissive" makes Wakelock Detector and Viper work right on this.....
Click to expand...
Click to collapse
Got it added; thanks for reminding me. I was caught up in Physics :good:
@chenxiaolong pached kernel may be not keep full root. I try with ktoonsez kernel works fine. Tks for your hard works.
Sent from my SM-N910W8 using Tapatalk
No issues at all wifi work? Cell strength good? Battery and speed excellent?
Will this completely fry my phone like the past lollipop TW builds?
Very Smooth, no issue at all @chenxiaolong
Do you lose Root with this ROM?
What recovery are y'all using? Just now getting around to rooting so I can install, and would like to use whatever is most reliable.
gtaguitar7596 said:
No issues at all wifi work? Cell strength good? Battery and speed excellent?
Click to expand...
Click to collapse
I wouldn't mislead you. Other than Google Now not working (and we know now how to fix it) this is the best stock version of BOC4. If you want a modded system you will want Ax's Lollipop thread for BOC4. Otherwise, just install this by following the OP's instructions and all will be well.
jeffreynew23 said:
Do you lose Root with this ROM?
Click to expand...
Click to collapse
Nope, you flash root in the 3rd step of the install.
hurrpancakes said:
What recovery are y'all using? Just now getting around to rooting so I can install, and would like to use whatever is most reliable.
Click to expand...
Click to collapse
TWRP 2.8.6.0 is what I used and is currently they only recovery for the Note 4 that you should be using (because PhilZ is discontinued). Most people will be using TWRP version 2.8.5.0, but I like to be bleeding edge.
Thank you for this very much! I really want to try this out but I already know right off the back I'm going to miss Xposed. D:
This is a Step by Step guide to update from Lollipop build N920AUCU2APB2 to Marshmallow build N920AUCU2BPE5
Tools Required
1. ADB, download here, install with arguments Y, N, Y
2a If your current build is N920AUCU2APB2 download this update
2b If your current build is N920AUCS2APE3 download this update
2c. If coming from a different build number see Post #2 to manually ODIN back to PB2 then run the update in step 2a
******************
If you get "Error 403 Forbidden" on any of the downloads use the following work around:
Download the Chrome Extension 'User-Agent Switcher'
Once installed switch to the agent 'Googlebot (Googles Spider)'
Downloads will be working again
After the downloads have started switch the Agent back to 'Default'
******************
Thank you to @bmatney who uploaded the DL to here
MD5: 7941A2C689C5B141675593E3FA33FB9A
was tested on a Windows 10 64 bit machine.
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and add the .zip extension to SS-G920AUCU3BOJ7-to-U3BOJ9-UP, so it is now called SS-G920AUCU3BOJ7-to-U3BOJ9-UP.zip
3. Shutdown your phone
4. Enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd
in my case: cd C:\Users\Danny\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCU2APB2-to-U2BPE5-UP.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Danny\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
10.Type adb sideload SS-N920AUCU2APB2-to-U2BPE5-UP.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Marshmallow
First time creating a How to post. If there is something not correct please let me know!
Thank you to
@sand_bit for his step by step guide in S6 forum here
@bmatney Mega upload
For those of you coming from a different builds here are the other links for updating:
From N920AUCU2APB2 to APE3 https://xdmd.sl.attcompute.com/agents/48725/1488/SS-N920AUCU2APB2-to-U2APE3
meek2100 said:
Here are the other update links people are asking for:
N920 Update File Links
(5.1.1) U2APB2 -> (6.0.1) 2BPE5 Credit to: ColoMtn
https://xdmd.sl.attcompute.com/agents/48725/1488/SS-N920AUCU2APB2-to-U2BPE5-UP
----------------------------------------
(5.1.1) 2AOJ1 -> (5.1.1) U2APB2 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48725/1488/SS-N920AUCU2AOJ1-to-U2APB2-UP
----------------------------------------
(5.1.1) 2AOI6 -> (5.1.1) U2APB2 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48725/1488/SS-N920AUCU2AOI6-to-U2APB2-UP
-----------------------------------------
(5.1.1) U2APB2 ODIN files for clean flash or restoring to STOCK can be found here. Credit to: Sunderwear
http://forum.xda-developers.com/att-galaxy-note5/general/note-5-marshmallow-odin-package-t3331843
------------------------------------------------------------------------------
Click to expand...
Click to collapse
ColoMtn said:
Tools Required
1. ADB, download here, install with arguments Y, N, Y
2. Odin, get a clean version from Sammobile here
3. Ensure your Note 5 is running Build: N920AUCU2APB2 this is the latest OTA available as of (5/16/16)
4. Download this to update from Lollipop PB2 ->PE5
Thank you to @bmatney who uploaded the DL to here
was tested on a Windows 10 64 bit machine.
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and add the .zip extension to SS-G920AUCU3BOJ7-to-U3BOJ9-UP, so it is now called SS-G920AUCU3BOJ7-to-U3BOJ9-UP.zip
3. Shutdown your phone
4. Shutdown your phone, and enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd <Your Directory>
in my case: cd C:\Users\Danny\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCU2APB2-to-U2BPE5-UP.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Danny\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCU2APB2-to-U2BPE5-UP.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Marshmallow
First time creating a How to post. If there is something not correct please let me know!
Thank you to
@sand_bit for his step by step guide in S6 forum here
@bmatney Mega upload
Click to expand...
Click to collapse
I'm getting "cannot read 'marshmallow.zip' " error
i keep getting dm-verity verification failed update from adb is disabled
creedicd said:
I'm getting "cannot read 'marshmallow.zip' " error
Click to expand...
Click to collapse
Did you make sure the directory had no Spaces and also move the ADB drivers to the same directory?
There are also users reporting that renaming the file 'marshmallow.zip.zip' fixes the issue.
im new to adb. i have no idea lol
blane3298 said:
i keep getting dm-verity verification failed update from adb is disabled
Click to expand...
Click to collapse
A quick google search says you may need to re-download the update
Odin?
ColoMtn said:
Tools Required
1. ADB, download here, install with arguments Y, N, Y
2. Odin, get a clean version from Sammobile here
3. Ensure your Note 5 is running Build: N920AUCU2APB2 this is the latest OTA available as of (5/16/16)
4. Download this to update from Lollipop PB2 ->PE5
Thank you to @bmatney who uploaded the DL to here
was tested on a Windows 10 64 bit machine.
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and add the .zip extension to SS-G920AUCU3BOJ7-to-U3BOJ9-UP, so it is now called SS-G920AUCU3BOJ7-to-U3BOJ9-UP.zip
3. Shutdown your phone
4. Shutdown your phone, and enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd <Your Directory>
in my case: cd C:\Users\Danny\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCU2APB2-to-U2BPE5-UP.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Danny\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCU2APB2-to-U2BPE5-UP.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Marshmallow
First time creating a How to post. If there is something not correct please let me know!
Thank you to
@sand_bit for his step by step guide in S6 forum here
@bmatney Mega upload
Click to expand...
Click to collapse
Thanks man - awesome stuff. Why Odin download? Needed at this stage? Or just ADB sideload?
tr8ze said:
Thanks man - awesome stuff. Why Odin download? Needed at this stage? Or just ADB sideload?
Click to expand...
Click to collapse
Just ADB sideload. Will update. Thanks!
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
Will these steps work on an encrypted phone?
darktrancer said:
Will these steps work on an encrypted phone?
Click to expand...
Click to collapse
Not sure.
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
I am on OJ1, do you think it will work? or is there any way to update from OJ1 to PB2, since I am not on the US and cant get OTA updates, thank you very much
any way this could be made into a odin flashable file?
mcepedaj said:
I am on OJ1, do you think it will work? or is there any way to update from OJ1 to PB2, since I am not on the US and cant get OTA updates, thank you very much
Click to expand...
Click to collapse
Try to update the url with in the original thread to reflect OJ1 and PB2 build numbers (can't look up the full build numbers right now). If that works use this same guide to apply the update.
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
blane3298 said:
any way this could be made into a odin flashable file?
Click to expand...
Click to collapse
I don't know how to do that but side loading was fairly simple.
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
so i can get up to the point of doing the "adb sideloade" command but i get the cannot read error. where can i locate the adb drivers? im new to adb and sideloading. thanks for the write up though.
bdevillier19 said:
so i can get up to the point of doing the "adb sideloade" command but i get the cannot read error. where can i locate the adb drivers? im new to adb and sideloading. thanks for the write up though.
Click to expand...
Click to collapse
Step 1
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
ColoMtn said:
Step 1
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
Click to expand...
Click to collapse
step 1 of the tools required section? i've done that numerous times. it says the driver is installed but doesnt give me any info as to where the drive is at. thanks for the reply
I'm trying to download the update from the Mega link provided earlier. It is taking SO LONG.
I'm getting impatient.
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
Working on getting apps reinstalled... AT&T loaded more **** on this firmware than they ever have before. Ridiculous.
★STOCK DEODEXED N930TUVU1APGC ROM★
Read below "BEFORE" downloading, flashing, and posting questions....
...REMEMBER...
I am not responsible for anything that happens to your device, if your SD card goes dead, and everything else!
STOCK DEODEXED N920TUVU3DPG1 ROM FEATURES
★ Stock
★ Rooted
★ Zipaligned
★ Deodexed
★ Busybox
★ SuperSU
★ KNOX Free
★ Init.d Support
★ Lightly Debloated
★ Data/App Support
★ Shell Script Tweaks
★ Wi-Fi Securestorage Fix
★ Screen Overlay Detected Fix
★ External SD Card Read/Write Fix
NOTE #1 - Has Some More Bloatware Kept In, It Can Be Removed By The User.
NOTE #2 - I Will Not Be Doing Any Further Modifications On This, It's Just A Stock Deodexed Rom For Users To Try Out And Can Use As Their Daily Driver.
NOTE #3 - Your KNOX Warranty Void Will Not Counter From 0 To 1 It Will Still Be Left At 0x0.
INSTALLATION INSTRUCTIONS
WARNING #1: Before Flashing Any Rom, Make Sure To Remove All Registered Fingerprints And Irises By Going To Settings -> Lock Screen And Security -> Fingerprints And Settings -> Lock Screen And Security -> Irises.
WARNING #2: Make Sure To Backup Any Of Your Applications And Data Using Samsung Cloud, Helium App Sync And Backup, Titanium Backup Root, Or FlashFire To Your External MicroSD Card Storage And Not Your Internal Storage.
WARNING #3: Make Sure You Have USB Debugging Enabled By Going To Settings -> General Management -> Then Tap "Build Number" Several Times Until You Get A "Developer Mode Has Been Turned On" Message. Now Go To Settings -> Developer Options -> And Enable The "USB Debugging" Option.
KNOWN ISSUES
- There Is No Secure Folder Knox Has Been Completely Removed And It Doesn't Work While Being Rooted Whenever There Is A Fix I Will Add It Back.
- Nothing Else So Far, You Tell Me.
INSTALLATION INSTRUCTIONS
1. First Thing Your Going To Do Is Download Both graceqltetmo_N930TUVU1APGC_Stock_Deodexed.zip And N930T_Note7_Adb_Rootkit_And_Odin_Pack.zip Files From The Download Link Section Below.
2. Extract All The Files From N930T_Note7_Adb_Rootkit_And_Odin_Pack.zip Onto Your PC Desktop, You Will Then Have Eight Files On Your Desktop Which Will Be MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRMWARE.tar.md5, graceqltetmo_N930TUVU1APGC_Stock_Deodexed.img, SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe, adb-setup-1.4.3.exe, CommandPrompt.bat, Odin3.exe, Odin3.ini, And sun7.
3. If You Haven't Setup ADB On Your PC Yet Or Installed The Samsung USB Drivers, Just Open Both Executables SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe And adb-setup-1.4.3.exe And Complete Both The Setup Processes. Once Done You Should Now Have A Created ADB Directory Which Should Be Located At C:\adb. Once ADB Is Setup, Place The sun7 Folder And CommandPrompt.bat Inside Your ADB Folder From The New Directory.
4. Now Put Your Phone Into Download Mode By Powering Off Your Device First And Then Hold The "Volume Down+Home+Power Buttons" At The Same Time Until You See The Download Mode Warning Screen. Now Press The "Volume Up Button" And Then Insert Your Samsung USB Plug.
5. Now Open Odin3.exe, Click On "AP", Select "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRMWARE.tar.md5", And Then Click On "Start". Wait For A Couple Of Minutes For The Modified N930PVPU1APH3 Engboot Firmware To Finish Installing.
6. Once Complete Your Phone Will Automatically Reboot Into Recovery Mode Where You Will See An Updating + Erasing Screen. Wait A Few Seconds So It Can Do It's Thing And Your Device Will Automatically Reboot Again. Next Is To Wait Patiently For Almost 20 Minutes On The Samsung Bootanimation Screen Until You End Up At The Setup Wizard.
7. While At The Beginning Of The Setup Wizard, Don't Press Anything! Next Thing Your Going To Do Is Root Your Device. Now Go Into Your ADB Directory First Thing You Might Want To Do Which Is Optional Is Open My Modified root.sh Shell Script That's Inside The sun7 Folder And In The Bloatware Section You Can Remove Any Of The Hashtags "#" To Remove Certain Applications That I Have Left Not To Be Removed By Default. Make Sure To Check Out The Information I Have Left Inside Of The Shell Script For The Users. Once Your Done With That Save Your Edits And Now Open The CommandPrompt.bat That You Have Placed In Your ADB Directory And Copy And Paste The Following Commands That You See Below One By One To Get Your Device Rooted.
Code:
adb push sun7 /data/local/tmp/su
adb shell chmod 0777 /data/local/tmp/su/*
adb shell
cd /data/local/tmp/su
su
./root.sh
After The Last Command You Need To Wait A Couple Of Seconds And Your Device Will Automatically Reboot. If It Gets Stuck During The Package Installation Process You Will Need To Go To Your Device And Press On "Accept" From The "Allow Google To Regularly Check Device Activity" Dialog Message. Once Rebooted Now Skip Everything From The Setup Wizard Until You Reach The TouchWiz Homescreen.
8. Next Place graceqltetmo_N930TUVU1APGC_Stock_Deodexed.zip Into Your Phone's Internal Or MicroSD Card Storage Until The File Transfer Completes. Now Open The FlashFire App From The App Drawer And Give It Root Privileges. Now In The Actions Menu Press The "+" Button Then "Flash ZIP or OTA". From Your Internal Or MicroSD Card Storage Find And Choose graceqltetmo_N930TUVU1APGC_Stock_Deodexed.zip And When In The Options Menu Make Sure Only "Mount /system read/write" Is Ticked And Then From The Top Right Corner Press The "Check Mark" Button. Now Scroll To The Bottom And Press "FLASH" And Hit "OK".
9. Now Your Phone Will Automatically Reboot And Then FlashFire Will Install The Rom. Once It's Done Installing Your Device Will Reboot Again, Now You Will End Up With A Black Boot Screen With No LED Indicator Light. Next Is To Wait Patiently For Almost 20 Minutes On This Black Boot Screen Until You End Up At The Setup Wizard. While At The Beginning Of The Setup Wizard, Don't Press Anything! Now Repeat "Step 7" To Root Your Device Again. Once Rebooted You Are All Done Your Device Is Now Rooted Again And You Can Now Restore Any Of Your Applications And Data And You Don't Need To Install Busybox Since My Modified su.img Has Already Got It Placed Inside The Image File And Extracts It To su/xbin. Also My Modified root.sh Shell Script Will Add More Tweaks To The Rom Adding Init.d Support, Setting Kernel To Permissive, And Disabling Dynamic Voltage Frequency Scaling!
Note #1 - Turn Off Automatic Updates For SuperSU In The Google Play Store Because Whenever There's A New Version For It And If You Update It, Root Will Break.
Note #2 - If Your Going To Use S-Health Don't Allow Google Play Store Or The Galaxy Apps Store To Update It Because The Latest Version Of The Application Checks For Root And Breaks The App. If It Gets Updated, Just Remove Any Traces Of It From system/priv-app/SHealth4 And data/app/com.sec.android.app.shealth-1 And Then Install The S-Health App From The Link Provided - Click Here
CHANGELOG
★ 9.14.2016
- INITIAL N930TUVU1APGC RELEASE
★ 9.17.2016
- There Will Be No More MicroSD Card Only Method! (You Can Now Install The Rom From Both The Internal Or MicroSD Card Storage.)
- Modified The Root Shell Script So It Will Now Install Chainfire's FlashFire App To Make Things Easier For The Users!
- Did Some Minor Renaming Changes And Fixes To The Root Shell Script!
- Root Shell Script Will Now Remove Leftover Facebook Installer Data!
- Updated SuperSU To v2.78 SR1!
CREDITS AND SPECIAL THANKS
chainfire
OvrDriVE
ted77usa
Kamy
galaxyuser88
Surge1223
bajasur
freeza
DOWNLOAD LINK
graceqltetmo_N930TUVU1APGC_Stock_Deodexed.zip - https://www.androidfilehost.com/?fid=24728673521238068
N930T_Note7_Adb_Rootkit_And_Odin_Pack.zip - https://www.androidfilehost.com/?fid=24728673521238069
★STOCK N930TUVU1APGC ODIN TAR★
STOCK ODIN TAR INSTALLATION INSTRUCTIONS
NOTE #1 - The Stock N930TUVU1APGC_N930TTMB1APGC_N930TUVU1APGC_HOME.tar.md5 Inside The Zip File Is Complete Stock Firmware.
NOTE #2 - I Would Highly Recommend That You Backup Your Applications, Data, And Etc To Your PC, Preferred Backup Application, Or Cloud Storage Just In Case.
NOTE #3 - By Flashing The Stock Odin Tar Your Device Will Be Back To Normal Just Like When You First Bought Your Device. It Can Be Used If You Want To Go With A Rootless Approach Or Before You Return/Sell Your Device.
INSTALLATION INSTRUCTIONS
1. First Thing Your Going To Do Is Download This N930T_Stock_Firmware_Odin_Pack.zip That I Have Done Myself With All The Files That You Need - CLICK HERE
2. Extract All The Files From N930T_Stock_Firmware_Odin_Pack.zip Onto Your PC Desktop, You Will Then Have Four Files On Your Desktop Which Will Be N930TUVU1APGC_N930TTMB1APGC_N930TUVU1APGC_HOME.tar.md5, SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe, Odin3.exe, And Odin3.ini.
3. If You Haven't Installed The Samsung USB Drivers, Just Open The Executable SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe And Complete The Setup Process. Once Done You Should Now Have The Samsung USB Drivers Installed.
4. Now Put Your Phone Into Download Mode By Powering Off Your Device First And Then Hold The "Volume Down+Home+Power Buttons" At The Same Time Until You See The Download Mode Warning Screen. Now Press The "Volume Up Button" And Then Insert Your Samsung USB Plug.
4. Now Open Odin3.exe, Click On "AP", Select "N930TUVU1APGC_N930TTMB1APGC_N930TUVU1APGC_HOME.tar.md5", And Then Click On "Start". Wait For A Couple Of Minutes For The Complete Stock N930TUVU1APGC Firmware To Finish Installing.
5. Once Complete Your Phone Will Automatically Reboot Into Recovery Mode Where You Will See An Updating + Erasing Screen. Wait A Few Seconds So It Can Do It's Thing And Your Device Will Automatically Reboot Again. Next Is To Wait A Few Minutes On The Bootanimation Screen Until You End Up At The Setup Wizard.
6. Once At The Setup Wizard Your All Done You Will Be On The Latest T-Mobile N930TUVU1APGC Stock Firmware Update.
NOTE #1 - When Going Back To The Complete Stock Firmware Samsung Pay, Android Pay, Etc Will Now Work Since Root Is No Longer Available And Your Knox Warranty Void Counter Will Not Get Triggered So Everything Will Be Perfect.
★XPOSED★
XPOSED INSTALLATION INSTRUCTIONS
NOTE #1 - Just A Reminder If Your Going To Install Xposed Which Would Cause Problems With Your Galaxy Note 7 Device Because It Isn't Fully Compatible Don't Post Any Issues That You Are Having While Your On Any Rom Because Xposed Can Break Things And Will Cause Many Problems While It's Installed.
NOTE #2 - Your Device Will Get A Bit Hotter Once It's Installed Just Wait For It To Cool Down Or Power Off Your Device For A Few Minutes And Then Power It Back On.
INSTALLATION INSTRUCTIONS
1. If You Haven't Yet, Download FlashFire From The Google Play Store From Here - https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
2. Next Download The Xposed Installer Apk From Here - http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
3. Then Download Wanam's Custom Xposed Framework Flashable Zip From The Link Provided - https://www.androidfilehost.com/?fid=24591000424962807
3. Once All Files Are Downloaded Place Them Into Your Phone's Internal Or MicroSD Card Storage Until The File Transfer Completes. Now Open The FlashFire App From The App Drawer And Give It Root Privileges. Now In The Actions Menu Press The "+" Button Then "Flash ZIP or OTA". From Your Internal Or MicroSD Card Storage Find And Choose xposed-v86.1-sdk23-arm64-custom-build-by-wanam-20160904.zip And When In The Options Menu Make Sure Only "Mount /system read/write" Is Ticked And Then From The Top Right Corner Press The "Check Mark" Button. Now Scroll To The Bottom And Press "FLASH" And Hit "OK".
4. Now Your Phone Will Automatically Reboot And Then FlashFire Will Install Wanam's Custom Xposed Framework Flashable Zip. Once It's Done Installing Your Device Will Reboot Again And You Will Need To Wait For Almost 15 Minutes On The Boot Screen Until Your Device Optimizes All The Apps And Then Head Back To The Homescreen.
5. Next Install The Xposed Installer Apk. Once Installed Go Into The App And In "FRAMEWORK" You Should Now See "Xposed framework version 86.1 (custom build by wanam / 20160904 is active" At The Top. If You Do Then Your All Done Now You Can Go Into "DOWNLOAD" To Install Other Xposed Applications (Making Sure They Are Compatible For Marshmallow) And Then Go To "MODULES" To Enable Them Following A Device Reboot To Activate Any Modules. Now Enjoy Working Xposed On Your Rooted Galaxy Note 7 Device!
Note #1 - If You Ever Want To Uninstall Xposed From Your Device Just Download And Install The Xposed Uninstaller Flashable Zip From The Link Here - http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20160829-arm64.zip Using FlashFire.
★ARYAMOD PREMIUM SOUND CONTROL★
ALL IN ONE APP WITH BEATS AUDIO + VIPER4ANDROID + DOLBY ATMOS
ARYAMOD PREMIUM SOUND CONTROL INSTALLATION INSTRUCTIONS
NOTE #1 - This Is An Advanced Sound Controller For Those Who Like To Have Full Control On Their Phone's Sound.
INSTALLATION INSTRUCTIONS
1. If You Haven't Yet, Download FlashFire From The Google Play Store From Here - https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
2. Next Go To The Link And Then Download The AryaMod Premium Sound Control Flashable Zip - http://forum.xda-developers.com/showpost.php?p=65887220&postcount=798
3. Once Downloaded Place It Into Your Phone's Internal Or MicroSD Card Storage Until The File Transfer Completes. Now Open The FlashFire App From The App Drawer And Give It Root Privileges. Now In The Actions Menu Press The "+" Button Then "Flash ZIP or OTA". From Your Internal Or MicroSD Card Storage Find And Choose AryaMod_Premium_Sound_Control.zip And When In The Options Menu Make Sure Only "Mount /system read/write" Is Ticked And Then From The Top Right Corner Press The "Check Mark" Button. Now Scroll To The Bottom And Press "FLASH" And Hit "OK".
4. Now Your Phone Will Automatically Reboot And Your All Done Now You Will Have Full Control With Your Phone's Sound And You Will Be Able To Enjoy A Much More Better Audio Experience.
reserved 4
This is just the beginning :good:
@jovy23
Amazing work as always Sir[emoji106]
Swyped From TWIST3D_N930T
ted77usa said:
@jovy23
Amazing work as always Sir[emoji106]
Swyped From TWIST3D_N930T
Click to expand...
Click to collapse
@jovy23. Thank you so much for yet another option for our Note 7's!
Can you tell me if this is compatible with xposed?
Is this still stable? I know with the rooting and all that good stuff of the s7 series, root cause quite a few instability issues.
v.v and nice, knox does not get trip! Anyone able to confirm samsung pay still works?
May just give this a spin when I get home...instead of exchanging for s7 edge lmao
edit: ah still based on sprint rooting system i see
mgbotoe said:
Is this still stable? I know with the rooting and all that good stuff of the s7 series, root cause quite a few instability issues.
v.v and nice, knox does not get trip! Anyone able to confirm samsung pay still works?
May just give this a spin when I get home...instead of exchanging for s7 edge lmao
edit: ah still based on sprint rooting system i see
Click to expand...
Click to collapse
Wassup madina..... u have Note 7 too .....haha awesome..... so far pretty stable for me.... but I didn't try @jovy23 deodexed rom yet..... I'm using @OvrDriVE modded stock rom right now
We used sprint userdebug kernel only .... there rest are TMO firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N920T using Tapatalk
ted77usa said:
Wassup madina..... u have Note 7 too .....haha awesome..... so far pretty stable for me.... but I didn't try @jovy23 deodexed rom yet..... I'm using @OvrDriVE modded stock rom right now
We used sprint userdebug kernel only .... there rest are TMO firmware
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Sweet, will definently gives this a spin
oh and ya! I am definitely here...riding along the ship going down in flame...literally
Will wifi calling still work?
BACARDILIMON said:
Will wifi calling still work?
Click to expand...
Click to collapse
Everything Works Wi-Fi Calling, VOLTE, Even Bluetooth Works I Even Paired One Of My Bluetooth Headsets And Even After A Reboot It Automatically Re-Paired And It's Still Connected No Bugs Whatsoever This Is 100% Deodexed And Not Ran Into One Bug Yet! Even Though I Always Thought Benchmarks Is Bull In My Opinion, I Always Get Above 143,000 Antutu Benchmark Scores!
Oh yeah by the way even though i don't use Xposed, but for testing purposes even Xposed works!
Thanks for this @jovy23 any difference in how the phone reacts as compare to stock, is it more fluid less stutter
Sent from my SM-N930T using XDA-Developers mobile app
mike28 said:
Thanks for this @jovy23 any difference in how the phone reacts as compare to stock, is it more fluid less stutter
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
It's stable, fluid, and super smooth you have to try it for yourself :good:
mgbotoe said:
Is this still stable? I know with the rooting and all that good stuff of the s7 series, root cause quite a few instability issues.
v.v and nice, knox does not get trip! Anyone able to confirm samsung pay still works?
May just give this a spin when I get home...instead of exchanging for s7 edge lmao
edit: ah still based on sprint rooting system i see
Click to expand...
Click to collapse
It's super stable there is no instability issues. Samsung pay will not work because of root im guessing latest samsung pay update should now check for both triggered knox and root even while i was on the odexed firmware root method samsung pay or any of the other paying apps didn't work as well. Flashing the modified tar file will likely flash the sprint firmware but the step after that your installing the tmobile firmware over it so there is no sprint system once your device boots to the setup wizard the only thing that's sprint is the kernel everything else is tmobile based.
jovy23 said:
Oh yeah by the way even though i don't use Xposed, but for testing purposes even Xposed works!
Click to expand...
Click to collapse
Thank you! ?
Sent from my SM-N930T using Tapatalk
carandcar said:
Thank you!
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
Your welcome. :good:
And by the way just to let everyone know i have found a way to get the rom to install from the internal storage as well! Internal storage root method will be the main method so no more MicroSD card instructions from now on which should be somewhat easier. Once im done testing, I will most likely release the instructions tomorrow or by the weekend.
BeyondRom V5.8
Based on Android 9.0 - G975FXXU3ASK1
Devices Supported: G973F(D), G975F(D)
ROM Features
<*>Aroma choices: full/dirty wipe, debloating, Bixby key remapping, Emoji</*>
<*>Supports G973F(D) and G975F(D)</*>
<*>Base SM-G975F G975FXXU3ASK1 odex/deodex November 2019 patch level</*>
<*>CSC features (camera sound menu, call recording, LTE only mod, camera during call, etc)</*>
<*>Knox removed, 1170 fonts by Winb33, AppLock</*>
<*>Included the security bypass from Ian’s multidisabler</*>
<*>build.prop tweaks: multiuser, Bluetooth Aptx driver, call ring delay, SHealth fix, WiFi and BT passwords remember</*>
<*>Dual SIM + SD Card, allow ss in secure apps, disable sig verification, SecureFolder</*>
<*>Reboot directly into rooted system from power menu, disable high volume warning</*>
<*>Possibility to choose in aroma to remove the boot warning</*>
Added/fixed in v5.8
<*>November ASK1 sw level</*>
Credits
- John Wu for Magisk
- Ianmcd for his multidisabler
- Ianmcd & Geiti for the TWRP
- Winb33for the fonts app
- SuperR for his kitchen
- fOmey for his smali patcher
- Khongloi for Secure Folder fix
- Corsicanu for his help and advices
- Sannoc for his help and support
- All people from Telegram group for testing (especially Nathan, Carlos, Raphael, Jay, Alan
Download Link
Google Drive
Digi Link
Flashable patched TWRP S10 (G973F)
Flashable patched TWRP S10+ (G975F)
Installation procedure for upgrade from BeyondROM v5.4 / v5.5
- Take a full TWRP backup
- Dirty flash or clean flash is ok
Installation procedure for upgrade from BeyondROM less than v5.4
- If you are on stock ROM, follow the attached guide
This ROM version needs minimum ASIG BL and ASIG TWRP/recovery or it won't boot !!!
1. Boot in TWRP and take a full backup before flashing BeyondRom 5.8 ROM zip
2. Copy the ROM zip to your phone (Ext SD preferably)
3. Download Ian’s Multidisabler v1.6 or higher and copy it to your phone
4. Download Ian’s TWRP 3.3.1-11, copy it to your phone and patch it with Magisk Manager or use the patched TWRP from gdrive folder
5. Download the stock FW for your device (S10 or S10+) – Frija is a good tool to use
6. Extract the AP from stock FW, copy it to a temp folder on your internal SD
7. Patch in Magisk Manager the AP
8. Copy the patched AP to your PC and replace the recovery.img inside the AP with the patched TWRP from point 4. Rename the patched TWRP to recovery.img before replacing it into the patched AP
9. Open Odin 3.13.1 or 3.13.3 and fill all slots with: patched AP, BL, CP and HOME_CSC. Uncheck the automatic restart and start flashing.
10. Once flashing completed, long press VOL DOWN + POWER until screen becomes black. IMEDIATELY the screen gets black, press VOL UP + BIXBY + POWER BUTTON to enter to TWRP recovery.
11. Once in TWRP, flash the Multidisabler v1.6 and right after flash BeyondROM v5.8 No need to reboot in between.
12. After flashing the ROM zip, save the aroma log, go back to TWRP root menu and select Reboot --> Recovery
13. Wait for the boot up (5-7 minutes) and setup your ROM to your liking
14. Enjoy the release of BeyondROM
Advises
1. Clean install if you have issues with dirty flash; don't start flashing BR5 without a twrp backup of your existing rom
2. If you have flashing issues: check rom zip MD5 hash
3. If you consider that the moded services are the culprit for your SnapChat ban, use stock services.jar provided in the download folder
4. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
Telegram chat
Happy flashing good people!
Always good to see a new rom for the S10(+)
:good::good:
i dont have LTE, only 4G.
what CSC should I chose when flashing?
mcn1970 said:
i dont have LTE, only 4G.
what CSC should I chose when flashing?
Click to expand...
Click to collapse
They're the same thing. It's just the way your phone is reporting the connection.
Regards,
Nathan
sevsman said:
They're the same thing. It's just the way your phone is reporting the connection.
Regards,
Nathan
Click to expand...
Click to collapse
features of the ROM presents LTE instead of 4G mod.
this is what I mean
mcn1970 said:
features of the ROM presents LTE instead of 4G mod.
this is what I mean
Click to expand...
Click to collapse
You have to choose it in the aroma. You may well have missed the option and a dirty flash will fix it.
Regards,
Nathan
sevsman said:
You have to choose it in the aroma. You may well have missed the option and a dirty flash will fix it.
Regards,
Nathan
Click to expand...
Click to collapse
i don't have this in Aroma
another one
??? Good luck with flashing it guys!
I can confirm it is working well on S10 G973F.
Thanks a lot @Andrei1973 @starbucks2010
Thank you for the update! :good::good::good:
Wow July update. !!!
:fingers-crossed::fingers-crossed::fingers-crossed:
Installed. So far working fine. Thanks OP.
how can I install TWRP for Galaxy S10+
and kernel?
tried this at least half a dozen times and get stuck at the same spot. I can root and get Magisk and be fine. Then I patch the appropriate TWRP file for my kernel (S10+ twrp-beyond2lte-3.3.1-3.1_ianmacd.img) and then I open the .tar file. I exchange out the recovery.img with the newly patched one. Then I repackage as a tar using B1 free archiver (this may be the issue, but it seems fine). It creates a new AP file. I insert that into Odin (the same version that worked previously) along with the corresponding BL, CP, and CSC files (I have tried both CSC and Home CSC). I boot into download, hook up my phone, hit flash and VOILA...NOTHING!!!! It says, "file analysis" and crashes every time. After a while I got sick of trying so I made an attempt to flash the recovery.img file straight through TWRP app by itself. All that did was cause an infinite boot loop. Can anyone please help me? Here are my rom file names.
AP_G975FXXU1ASE7_CL16003457_QB24029035_REV01_user_low_ship_meta_OS9.tar.md5
BL_G975FXXU1ASE7_CL16003457_QB24029035_REV01_user_low_ship.tar.md5
CP_G975FXXU1ASE5_CP12748354_CL16003457_QB23792291_REV01_user_low_ship.tar.md5
CSC_OMC_OXM_G975FOXM1ASE5_CL16003457_QB23792291_REV01_user_low_ship.tar.md5
HOME_CSC_OMC_OXM_G975FOXM1ASE5_CL16003457_QB23792291_REV01_user_low_ship.tar
MM Pre-patched AP + TWRP name is "magisk_patched + TWRP.tar."
The TWRP file I downloaded was: twrp-beyond2lte-3.3.1-3.1_ianmacd.img which I of course renamed to recovery.img.
THEN AFTER I GET THIS WORKING, DO I JUST FLASH STRAIGHT THE ZIP FOR THE CUSTOM ROM INSIDE TWRP AND THAT'S IT?
TIA
I just noticed that every time I create the tar file it eliminates the .MD5 extension. Can I just edit the file name to include the .MD5 or do I have to do something special to actually modify the file? Thank you.
kevinjmoore said:
I just noticed that every time I create the tar file it eliminates the .MD5 extension. Can I just edit the file name to include the .MD5 or do I have to do something special to actually modify the file? Thank you.
Click to expand...
Click to collapse
I think your archive editor isn't up to scratch, install 7zip from here Download
Try using this recovery, its a working pre magisk patched image G973F_magisk_patched3.3.1-3.1.img
Rename it to recovery.img and replace the one inside your magisk patched version of AP_G975FXXU1ASE7_CL16003457_QB24029035_REV01_user_ low_ship_meta_OS9.tar.md5 using 7zip. Then flash with odin.
Hope this helps
kevinjmoore said:
I just noticed that every time I create the tar file it eliminates the .MD5 extension. Can I just edit the file name to include the .MD5 or do I have to do something special to actually modify the file? Thank you.
Click to expand...
Click to collapse
Just delete md5 extension, you don't need that. Odin will flash *.tar file without any problems
Thank you for the reply. There are three things that I'm not sure about. All the versions of 7zip that I have used can't create or edit tar files. The second is my device is 975F not 973. Finally, what are the exact steps to replace the recovery file in 7ZIP? That seems to be where it's having the hangup.
@oggi21 I only added that extension as a last resort. It won't flash the regular tar file once I add the patched AP with TWRP recovery using the B1 archiver. Any help would be appreciated.
Any chance of US CSC's like TMB could be implemented?
kevinjmoore said:
Thank you for the reply. There are three things that I'm not sure about. All the versions of 7zip that I have used can't create or edit tar files. The second is my device is 975F not 973. Finally, what are the exact steps to replace the recovery file in 7ZIP? That seems to be where it's having the hangup.
@oggi21 I only added that extension as a last resort. It won't flash the regular tar file once I add the patched AP with TWRP recovery using the B1 archiver. Any help would be appreciated.
Click to expand...
Click to collapse
The best way is to take any tar file (AP or whatever) and open it in 7zip. Then put yours files in it and delete all others that was inside