LTE lights up , but no data - Sprint Samsung Galaxy S6 Edge+

Ok folks , need some help with this . Sprint just lit up lte where I live and all my neighbors are getting lte and it works just fine for them . I get complete lte bars and such , however, I have no data what so ever . I've called countless times to no avail , it's always the same thing , reset profile , etc... . That said , is there anything that someone could think of to get this going ? It is not rooted btw . Also , I do have the msl so I can edit the data side of things .
It connects to APN2 LTE INTERNET APN . I am assuming the settings are correct as I haven't changed anything . Any advise would be greatly appreciated . :good:

Anyone .....

Take it to a sprint store. Have them fix it.
Sent from my SM-G928P using Tapatalk

Great idea ! I have taken it there , in fact, all 4 phones have been there and they have no idea what's wrong . It's a provisioning issue I believe.

If they cant fix it they should replace the device.
Sent from my SM-G928P using Tapatalk
---------- Post added at 05:16 PM ---------- Previous post was at 05:14 PM ----------
I had data issues where data used on one device would show up on another. They could not fix it. They replaced the device.
Sent from my SM-G928P using Tapatalk

It's on all 4 phones . They are brand new . It's a provisioning issue
galland1 said:
If they cant fix it they should replace the device.
Sent from my SM-G928P using Tapatalk
---------- Post added at 05:16 PM ---------- Previous post was at 05:14 PM ----------
I had data issues where data used on one device would show up on another. They could not fix it. They replaced the device.
Sent from my SM-G928P using Tapatalk
Click to expand...
Click to collapse

huedawg said:
It's on all 4 phones . They are brand new . It's a provisioning issue
Click to expand...
Click to collapse
Have you tried simply updating the prl and profile.

GamerOnOne said:
Have you tried simply updating the prl and profile.
Click to expand...
Click to collapse
Read the post . Thanks

Here was the work around for this , just in case someone else has this issue . This was debugged by me , not Sprint , as they stated everything was ok on their end, while , in fact , it was not . This may occur after the porting process is complete , and after your new account being setup . First, if are having issues with lte connectivity on all the lines on your account ( not just one) , simply call and have them take your account off the shared data plan and put it on unlimited . Yes, it's simply a data provisioning issue They might deny it , however, that is what it is . Once that is complete , you will have to submit a click it ticket to have your whole account re-provisioned for data .

Related

[Q] WiFi Hotspot Not Working [SOLVED]

Hi Everyone,
I am facing an unusual issue. Tried searching a lot if anyone else is facing anything similar, but I guess I'm the only one.
I've been trying to use the WiFi hotspot feature since a last few days, but it doesnt work properly. When I scan for wifi networks from any other device, it shows the wifi name of my portable hotspot. On entering password and everything, it says connected. Now, when I try to access internet on the wifi device, it doesnt work. The data arrows on my One X do flash, but there is no data received at the wifi device end.
I've tried to use my portable hotspot with following devices (one at a time) till now: PS Vita (wifi only), the new iPad (iPad3, wifi only), and my sister's HP laptop. Same problem with all three devices.
I've tried following settings as well:
1) Using default SSID with no password
2) Using default SSID with password (both WEP and WPA)
3) Changing SSID to something else, with and without password protection
Internet (3G), otherwise, is working perfectly fine on my HTC One X, in fact i am able to receive emails and access internet on my phone during the wifi hotspot activated and devices connected to my phone.
I have the latest OTA update (for India) installed on my phone, i.e. 1.28.720.10
The problem was there before also (previous firmware), and after the recent OTA update, it still remains.
Can anyone help me get rid of this issue? Or maybe suggest some workarounds.
There's one thing that i'm planning to do...i saw a post on xda forum where someone has posted apk files for all preinstalled apps on HTC One X. I can try an install the wifi hotspot app again, maybe that works.
got the same problem here, have u found a solution?
Try using this: http://code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_1-beta14.apk
I am using android hd2. Hotspot is not working in sense so I use wifi tether. It works very well.
I'm here to save the day, try making a new apn with the EXACT same settings as your default one however change the name to 'Consumer Broadband'...I'm on T-Mobile UK and that's how I fixed it, had the exact same problems as you
Sent from my HTC One X using xda premium
hi,
thanks liehuo but already tried it with no luck.
---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
will give that a go thanks vincepg13.
will let u know
---------- Post added at 12:29 PM ---------- Previous post was at 12:18 PM ----------
ok got this sorted, was about to try vincepg13 suggestion when saw under settings option to reset apn settings to default, never changed them but thought would give it a go and it did the trick
thanks,
vincepg13 said:
I'm here to save the day, try making a new apn with the EXACT same settings as your default one however change the name to 'Consumer Broadband'...I'm on T-Mobile UK and that's how I fixed it, had the exact same problems as you
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thank you so much! You saved me not just my bank holiday day, most probably few weeks more of headaches.
Sent from my Transformer Prime TF201 using Tapatalk
pilotghost said:
Thank you so much! You saved me not just my bank holiday day, most probably few weeks more of headaches.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
No problem!
Sent from my HTC One X using xda premium
jazznaura said:
ok got this sorted, was about to try vincepg13 suggestion when saw under settings option to reset apn settings to default, never changed them but thought would give it a go and it did the trick
thanks,
Click to expand...
Click to collapse
Awesome man...this worked for me as well...don't know how I messed up the settings earlier
Sent from my HTC One X using XDA
Shared networks
I had exactly the same issue with my T-Mobile HTC One X - after years of successful WiFi hotspot use with my old HTC Desire.
Whilst investigating the APN setting suggestions posted here I noticed that I was actually connected to the T-Mobile Orange network and not the T-Mobile network.
I switched to plain old T-Mobile and a moment later my laptop reported internet connectivity. Go figure.
I never had that problem on the Desire but at least I have a few workarounds now... thanks for the advice everybody.
vincepg13 said:
I'm here to save the day, try making a new apn with the EXACT same settings as your default one however change the name to 'Consumer Broadband'...I'm on T-Mobile UK and that's how I fixed it, had the exact same problems as you
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Literally, you are life saver.... I was really considering to sell my HoX... =)
Works like a charm... thanks...
I've had the issue where if I tether another Android device to it the tethered device can't access the Play store while mine can. Everything else works fine, just no Play store access for anyone connected to my hotspot.
Has anyone encountered this issue?
jazznaura said:
hi,
thanks liehuo but already tried it with no luck.
---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
will give that a go thanks vincepg13.
will let u know
---------- Post added at 12:29 PM ---------- Previous post was at 12:18 PM ----------
ok got this sorted, was about to try vincepg13 suggestion when saw under settings option to reset apn settings to default, never changed them but thought would give it a go and it did the trick
thanks,
Click to expand...
Click to collapse
Hi
i am using one x(India) ....i hv got the same problem..!
hotspot connects and laptop shows internet connection but am unable to use the internet. unable to open webpages or anyother internet activity.
is their a setting for laptop i should do ? becuase hotspot is working in other device.
help would be really appreciated.
Thanks
PS laptop is HP DV6000 series.
I do have a similar problem with hotspot.
the hotspot icon will not appear after switching it on but i can still see the hotspot from my laptop and connect to it, but there is no internet.
I have tried to rename the name to "Consumer Broadband" but it`s the same.
Do i need to delete the old VPN and make the new one?
I`m not rooted yet.
FYI: Tethering/hotspot doesn't work with IPv6 yet
I know this problems is solved, but for other that may find this helpful...I was having some similar issues. Using the hotspot, I could connect my phone to my tablet but it wasn't connecting to the internet. My problem was that I had set up an IPv6 APN on my phone and didn't realize that tethering/hotspot does not work on IPv6 yet. I switched back to the default APN and it works fine.
not working on one s with new apn
scuttlefield said:
I know this problems is solved, but for other that may find this helpful...I was having some similar issues. Using the hotspot, I could connect my phone to my tablet but it wasn't connecting to the internet. My problem was that I had set up an IPv6 APN on my phone and didn't realize that tethering/hotspot does not work on IPv6 yet. I switched back to the default APN and it works fine.
Click to expand...
Click to collapse
Created new with new apn "consumer broadband" but with same settings as tmobile apn. My tablet connects but It always takes me to tmobile Page asking me to take tmobile WiFi hotspot service at 15$ a month. How do I avoid going to tmobile Page?
vincepg13 said:
I'm here to save the day, try making a new apn with the EXACT same settings as your default one however change the name to 'Consumer Broadband'...I'm on T-Mobile UK and that's how I fixed it, had the exact same problems as you
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Followed your suggestions, my Atrix2 hotspot works gr8 :good: thx
vincepg13 said:
I'm here to save the day, try making a new apn with the EXACT same settings as your default one however change the name to 'Consumer Broadband'...I'm on T-Mobile UK and that's how I fixed it, had the exact same problems as you
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Hi Vincepg13,
I also have had this problem, but since I read your post regarding changing the APN (Access Point Names) setting to the name 'Consumer Broadband' it has allowed me to use the Wi-Fi Hotspot feature on my Branded T-Mobile UK HTC One X device. I am so grateful for your diagnostic for this situation that really was a nuisance. I feel at ease that I can finally use my device to tether with other device which have Wi-Fi Only or do not have a Mobile Data on-board. My One X has a new use that I had on a previous HTC device, so glad I can use it effectively.
Advice for others who are doing this make sure you spell the 'Consumer Broadband' correctly and I would highly recommend that you take screen shots of the current APN, so you can match all the settings correctly. Also do not delete the current APN, if you do take Sim card out of tray, restart your phone and replace the Sim card, it should automatically set up a APN for your network. Furthermore this should also work for all other UK networks. I can not confirm for other countries because I am from the United Kingdom.
Once again thank you to Vincepg13. :good:
Rikmano
jazznaura said:
reset apn settings to default, never changed them but thought would give it a go and it did the trick
Click to expand...
Click to collapse
Sorted many thanks!
Help
Guys Please help Please Please Please !!! I have the same problem, You mean i should change My Apn name to my Operator Name??? I did this, but Problem is steel exist...
HTC Hotpot Issue Resolved!!!
After searching so many days. i found the solution accidentaly
My Simple Answer is "Disable LAN" on Desktop
How You Do That?
open network and sharing center >> change adapter settings >> Local Area Connection (Right Click to Disable)
then connect your desktop with your htc hotspot
See the magic. Like my answer if it work for you as well

Question on tethering s6

So I used to tether alot on my s6 and had my service on a vacation plan and now ive reconnected it. Ive noticed now in the unlimited plan they offer 3gb hotspot will that now cut me off at 3gb, because I used to tether around 20gb a month. Thanks for any information
Question, How do I get tethering to work? I get a "You must subscribe" screen. I have tried xposed modules and playing around with the build.prop, deleting system apps that I suspected of causing this message. No go. HELP!
Saafir said:
If you're rooted and have "dun" added to your APN settings it will not cut you off at 3gb. It will just appear as normal data usage under your Unlimited data info.
Click to expand...
Click to collapse
Alright Good to know, Yea I have my phone rooted, but how do I add "dun" to my apn settings. If you can point me in the right direction.
Saafir said:
@Poebat @uberbor3d
http://forum.xda-developers.com/note-4-sprint/general/lollipop-hotspot-root-flashing-t3048163
Click to expand...
Click to collapse
Yes, but I can't get my MSL
Saafir said:
Can't is a strong word. You can do anything you put your mind too. You can simply ask Sprint, which I have never had a problem with. Or if you have an old device laying around still.. Reactivate the old device to your line, then switch back to your S6. You'll get the activation EMail containing your six digit activation number, or "MSL" Alternatively you could use Galaxy Tools.
Galaxy Tools: https://www.dropbox.com/s/afvzbs5w752yp4p/GTv3.1.5.apk?dl=0
Click to expand...
Click to collapse
Thanks! I can't contact sprint for it and Galaxy tools proved itself to be gone.
---------- Post added at 11:04 PM ---------- Previous post was at 11:01 PM ----------
Also, may I ask: How the heck did you find galaxy tools
Even Better!
Saafir said:
If youd like you can replace your Hidden Menu.apk in system/app with this one. It has the MSL prompt removed.
View attachment 3618114
Click to expand...
Click to collapse
Thanks! I'd rather use this than Galaxy Tools........ Idk. Just doesn't feel right. Whatever I have a strange mind sometimes
Saafir said:
If youd like you can replace your Hidden Menu.apk in system/app with this one. It has the MSL prompt removed.
View attachment 3618114
Click to expand...
Click to collapse
It doesnt work
Saafir said:
Did you make sure to set the permissions to 0644? (rw-r-r)
Forgot to mention that. It does indeed work because I am using it.
Click to expand...
Click to collapse
I can vouch for this as well. Just tried it, and it is working perfectly. Thanks!
could somebody explain this whole thread to me please.
Am i to assume that i need root and some tweaking of permissions and what not? To acheive the unlimited internet with mobile hotspot? Does the phone come with a stock hotspot app? Or is one needed from the playstore?
My verizon phone note2 was never rooted and came with hotspot app. BUT, i was limited on the internet. Whereas, my sprint note2 had to be rooted and has the wifi tether app.
I've heard the coverage has improved. And from what i can tell with my sprint note2. That appears to be the case. I would really like to ditch verizon and get back to sprint. For half the price and unlimited. My verizon s6 appears to have better coverage then the note 2. And it has a stock hotspot app. I"m hoping to see improved coverage results with the sprint s6. And really want the unlimited internet. Preferably at the SPARK or 4g speeds that are available. ( I'm a truck driver )
Saafir said:
Did you make sure to set the permissions to 0644? (rw-r-r)
Forgot to mention that. It does indeed work because I am using it.
Click to expand...
Click to collapse
Yay! That's all the was needed! But one Question, I accidentally enabled some sort of debugging using the Galaxy Tools APP I know it said (QCOM ONLY) at the end.and now anytime I boot it says silent log failed I tried doing a complete restore from a few days ago and it is still there.
---------- Post added at 07:36 PM ---------- Previous post was at 07:35 PM ----------
snowwy66 said:
could somebody explain this whole thread to me please.
Am i to assume that i need root and some tweaking of permissions and what not? To acheive the unlimited internet with mobile hotspot? Does the phone come with a stock hotspot app? Or is one needed from the playstore?
My verizon phone note2 was never rooted and came with hotspot app. BUT, i was limited on the internet. Whereas, my sprint note2 had to be rooted and has the wifi tether app.
I've heard the coverage has improved. And from what i can tell with my sprint note2. That appears to be the case. I would really like to ditch verizon and get back to sprint. For half the price and unlimited. My verizon s6 appears to have better coverage then the note 2. And it has a stock hotspot app. I"m hoping to see improved coverage results with the sprint s6. And really want the unlimited internet. Preferably at the SPARK or 4g speeds that are available. ( I'm a truck driver )
Click to expand...
Click to collapse
Sprints alot better. Especially with the new phones. My S4 got better coverage than my HTC EVO 4G LTE and My s6 gets the best connection of all
---------- Post added at 07:53 PM ---------- Previous post was at 07:36 PM ----------
It was the SysDump Menu. Enable Silent Logging from Boot(ONLY QCOM) how do I disable?

Hotspot Mod no root works on all TW Roms (android) 3/09/16

Just a quick how to on unlocking the Hotspot on any version of tw including our new s7 and s7 edge. Root is Not needed
First you must get your msl
There are numerous ways to get it the best way is call sprint tech support and tell them "band 41 is disabled and you need to enable it. Your friends s5 gets it and he has sprint spark. Mines disabled" "i can tell because the app lte discovery shows it disabled" they will send you to advanced tech support who will give you the msl and walk you through enabling band 41. {just go along with him and say goodbye you got the msl now} or however you can get it
Next type in ##data# (on the phone dialer pad)
Click edit
Type in yoUr MSL
Go to apn settings
Select the first apn EHRPD and go to type
Change it from (default, mms) to (default, mms, dun) no spaces
Click the menu up top right and hit save
{hitting save is mandatory}
Next got to the lte apn
Go to type
And make the same changes also remember HIT SAVE
Now reboot and turn on your Hotspot
Tadaaaa a.
Note Hotspot will not work on airrave. without adding this:
to get it to work on airrave got to the same APN area as above with MSL
click add apn and name it APN2 EVDO_A
next go to APN below name and type n.ispsn
next go down to type and enter default ,mms,dun
next go down to protocol and check ipv6 and ipv4 both do this on the roaming protocol below it also
next go down to bearer and uncheck unspecified and check EVDO_A
last again in the top right corner hit menu save (saving is mandatory) At least this method. But it works flawlessly otherwise. Hopes this helps
Works on All tw roms
Enjoy
if you update your prl or profile youll have to add dun back to the apns it only takes a minute though
profile and prl updates reset the dun setting
enjoy my fellow s7 edge owners
UPDATE: this mod will not work if you've updated past APB5, to the newer APC5
that update blocked the apn settings even with the msl
TO use Hotspot on later firmware as soon as you boot up go straight to hotspot and start it. it will turn off turn it right back on and it will work but you have to reboot everytime you turn it off.
I recommend in setting up at the top you'll see edit (thats for the quick ones listed there)
add Hotspot to it. so when you start up its quicker to get too. this does work because android starts before sprints cockblocker can start up and check. enjoy either way
K i also figured out how to allow hotspot on airavre and most likely any connection. Gonna test roaming next gotta go to a roaming area first. Remember this is a no root method but will probably work on any rom sprint
I got it working on any connection even roaming. Ill post instructions soon.
Are you still working on this?
goldy253 said:
Are you still working on this?
Click to expand...
Click to collapse
i got it all done just have to post instructions . works perfect on everything except roaming 1xrtt
ill try and do it today. very simple but there one hoop you have to jump through. not a big one though
no root need too
I have not done any extensive testing but have found that the no root method for other samsung devices works fine for me.
On phone dialer: ##DATA#
Enter MSL Code ( many say to get it during a chat session with sprint and say you need it to fix GPS, I just say I need it for development)
APN Settings -> APN2 EHRPD Internet-> APN Type
Change default,mms->default,mms,dun
Press menu in the upper-right and save
Do the same for APN2 LTE internet
Save
Reboot
Hotspot working. (Sprint)
Thank you for posting instructions; however, I have applied these changes without luck. (checked, double-checked.. then did it a third time to make sure of the settings).
Could it be that you're already provisioned for hotspot? I know there are a few newer Sprint plans that allow for a limited hotspot.
You are using the native hotspot application within the device, correct? Just making sure I'm not missing anything.
Thanks!
chrisduclo said:
I have not done any extensive testing but have found that the no root method for other samsung devices works fine for me.
On phone dialer: ##DATA#
Enter MSL Code ( many say to get it during a chat session with sprint and say you need it to fix GPS, I just say I need it for development)
APN Settings -> APN2 EHRPD Internet-> APN Type
Change default,mms->default,mms,dunn
Press menu in the upper-right and save
Do the same for APN2 LTE internet
Save
Reboot
Hotspot working. (Sprint)
Click to expand...
Click to collapse
@nmcdonald96 just follow the new instructions i posted in the OP. remember to hit save and it does not work roaming
Yes, I am using the native hotspot. I am on the 1500 min, unlimited data plan, no hotspot included. Not sure why yours would not be working. When you retry the changes, are they back to the original settings or the way you changed them?
Success, my friend. Thank you for the how-to!
Robalboa said:
@nmcdonald96 just follow the new instructions i posted in the OP. remember to hit save and it does not work roaming
Click to expand...
Click to collapse
---------- Post added at 02:41 PM ---------- Previous post was at 02:39 PM ----------
The only thing I noticed different in the OP instructions was 'dunn' vs 'dun'. Unsure of the difference in that. Thank you, though!
chrisduclo said:
Yes, I am using the native hotspot. I am on the 1500 min, unlimited data plan, no hotspot included. Not sure why yours would not be working. When you retry the changes, are they back to the original settings or the way you changed them?
Click to expand...
Click to collapse
nmcdonald96 said:
Success, my friend. Thank you for the how-to!
---------- Post added at 02:41 PM ---------- Previous post was at 02:39 PM ----------
The only thing I noticed different in the OP instructions was 'dunn' vs 'dun'. Unsure of the difference in that. Thank you, though!
Click to expand...
Click to collapse
yes only one n the other guy probably typod . no problem remember if you update profile or prl it may cause you too have to redo it. but quite simple though so no big deal. awesome hit that thanks button lol
You have dunn, it's dun
Sent from my SM-G935P using XDA Free mobile app
If you receive your phone in the mail and go online to sprint to activate it, once you get to this confirmation page it gives you your msl. They label it as Activation code.
Sent from my SM-G935P using XDA Free mobile app
Omahabruin said:
If you receive your phone in the mail and go online to sprint to activate it, once you get to this confirmation page it gives you your msl. They label it as Activation code.
Sent from my SM-G935P using XDA Free mobile app
Click to expand...
Click to collapse
good find. thanks
Any suggestions on getting around Sprint's policy of not giving MSL's if the phone is under a contract? I had it activated it at Best Buy so no confirmation page.
I'm under contract and it worked for me
Soooperstar said:
I'm under contract and it worked for me
Click to expand...
Click to collapse
Did you call or chat? What did you tell them?
djxtreme504 said:
Any suggestions on getting around Sprint's policy of not giving MSL's if the phone is under a contract? I had it activated it at Best Buy so no confirmation page.
Click to expand...
Click to collapse
follow the instructions in the OP DONT MENTION MSL
just tell them band 41 isnt working if they ask you where you are tell them tampa fl
they will send yo
u to advanced tech thats where the guy will tell you to type it in then just write it down. and humor him the rest of the call
djxtreme504 said:
Did you call or chat? What did you tell them?
Click to expand...
Click to collapse
I told them exactly what was said in the OP. They didn't ask questions or anything
---------- Post added at 09:20 PM ---------- Previous post was at 09:19 PM ----------
Robalboa said:
follow the instructions in the OP DONT MENTION MSL
just tell them band 41 isnt working if they ask you where you are tell them tampa fl
they will send yo
u to advanced tech thats where the guy will tell you to type it in then just write it down. and humor him the rest of the call
Click to expand...
Click to collapse
What's goin on man, I remember you from the S3 days
Soooperstar said:
I told them exactly what was said in the OP. They didn't ask questions or anything
---------- Post added at 09:20 PM ---------- Previous post was at 09:19 PM ----------
What's goin on man, I remember you from the S3 days
Click to expand...
Click to collapse
whats
up bro. glad it worked for you. thanks for the update. this phone takes picture videos everything UNDERWTER
only keep it under 9 feet. also i only have done it in swimming pools. im afraid of the salt water.
any way for the first time im not rooting this phone we can disable any app we want and it runs so fast so smooth
plenty of customization's . love it.
pl us warning if you root it and trip the knox counter fuse. you'll never be able to use samsung pay MST ever.

A5 2017 Problem with youtube.

Hello guys , does anyone has the same problem with youtube like me ?
I can t see any video in 1080p60fps/720p60fps because my wifi connection dissapear always for few seconds during a video...
Can someone help me ? Thx.
I have same probelm with the connection dissapearing. Hope Nougat solve this issue.
tibigabi12 said:
Hello guys , does anyone has the same problem with youtube like me ?
I can t see any video in 1080p60fps/720p60fps because my wifi connection dissapear always for few seconds during a video...
Can someone help me ? Thx.
Click to expand...
Click to collapse
Are you using the firmware that came with your device? If you're using the Russian nougat, it might be a bug that'll be fixed later. If you're using Marshmallow which came with your device, you might want to try a network reset. Settings->General->Reset and the reset network option there.
maybe ur network issue
Oves786 said:
maybe ur network issue
Click to expand...
Click to collapse
Look here: https://forum.xda-developers.com/sa...lp/a5-2017-wifi-reconnecting-youtube-t3634458
It must be bug with Marshamllow ROM, factory reset doesnt help, as long as you are like 50cm away from the router it seems fine.
---------- Post added at 06:47 PM ---------- Previous post was at 06:46 PM ----------
aoyanagi said:
Are you using the firmware that came with your device? If you're using the Russian nougat, it might be a bug that'll be fixed later. If you're using Marshmallow which came with your device, you might want to try a network reset. Settings->General->Reset and the reset network option there.
Click to expand...
Click to collapse
Doesnt work...
I had the problem with android marshmallow and i was thinking that the problem will dissapear in nougat but no.
I am using nougat from rusia.
Wow, this phone really sucks... S5mini =no problem, iPhone 6s plus = no problem, even j3 2016 = no problem, only this device reconnects as hell on youtube and sometimes even on the stock browser.
Just to make sure, did you do FR?

E4 Qualcomm LOS CDMA Data Fix Discussion

I figured we should have a thread to discuss working on fixing mobile data on cdma E4's to keep the chatter out of the rom threads. @CodyF86 I'm able to get full signal bars and even get it to say sprint or boost for the carrier. I just can't get it to actually connect. I tried adding overlays for the radio access families: https://github.com/aaronmarch/andro...mmit/c9325b3a56426f4a49af8aa072b075549ab99546
I also changed up the init_moto.cpp like the init_surnia.cpp we have for surnia with only the boost info for now: https://github.com/aaronmarch/andro...mmit/ca313bab8097a971e88ecdcfd8495a0545d9d80e
No go. I've tried changing up the apns, completely different apns, the stock apns, mvno-slayer...
Any ideas? Do you think we can get it, or should we try to call in reinforcements?
https://test-it.us/apns-conf.xml
Here is the stock E4 apns-conf.xml file unfortunately these values must matched what is built into apps/common/res/apns.xml, so you'd have to include the apn file i linked to /etc/apns-conf.xml and make that match what you build lineage with or use sql editor.
I'm working on it as we speak tho. I did randomly have a 1x data connection earlier lol. Well get it; it should be simple. WIll keep you posted.
And for whatever reason being able to edit and save apns if you edit the mcc mnc and have them not disappear seems to have reverted. It was working for a month or so not to long ago.
apn carrier="Sprint"
mcc="311"
mnc="870"
type="default,supl,mms,fota,cbs,ia,wifi"
protocol="IPV4V6"
roaming_protocol="IPV4V6"
mmsc="http://mm.myboostmobile.com"
mmsproxy="oap7.sprintpcs.com"
mmsport="80"/>
Is the new boost /sprint LTE apn.
I added the wifi under type even tho boost blocks wifi calling atm via the phones imei or whatever, but sprint allows wifi calling can also change name of apn carrier to sprint, but seems like lineage roms call it sprint regardless and that doesn't really matter.
CodyF86 said:
https://test-it.us/apns-conf.xml
Here is the stock E4 apns-conf.xml file unfortunately these values must matched what is built into apps/common/res/apns.xml, so you'd have to include the apn file i linked to /etc/apns-conf.xml and make that match what you build lineage with or use sql editor.
I'm working on it as we speak tho. I did randomly have a 1x data connection earlier lol. Well get it; it should be simple. WIll keep you posted.
And for whatever reason being able to edit and save apns if you edit the mcc mnc and have them not disappear seems to have reverted. It was working for a month or so not to long ago.
Click to expand...
Click to collapse
Yeah, it shouldn't be too hard because it's reading the sim card. It's almost there. I completely forgot about about making the apns match, I knew I was forgetting something, lol.
@mightysween and some others for the Moto G got cdma working back then....
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
amarc78 said:
Yeah, it shouldn't be too hard because it's reading the sim card. It's almost there. I completely forgot about about making the apns match, I knew I was forgetting something, lol.
Click to expand...
Click to collapse
Did you get that combination of 1x that I sent you? XDA doesn't let me see replied messages
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
SatoXian Theory:
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
I posted it here. But I'm glad you made a new section for it.
SykkNyzz said:
@mightysween and some others for the Moto G got cdma working back then....
Click to expand...
Click to collapse
Yeah, me and CodyF86 and mainly Gabrielle M, who I was thinking about when I mentioned calling in reinforcements. I'm pretty sure it's just a matter of getting the apns correct, so it's not as bad as falcon was back then.
SykkNyzz said:
@mightysween and some others for the Moto G got cdma working back then....
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
Did you get that combination of 1x that I sent you? XDA doesn't let me see replied messages
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
SatoXian Theory:
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
I posted it here. But I'm glad you made a new section for it.
Click to expand...
Click to collapse
Yes. I haven't able to get even the 1x but CodyF86 said he did.
Check out "SysLog"
https://play.google.com/store/apps/details?id=com.tortel.syslog
This is a quick way to pull a log for people without quick access to a PC. Just tick modem bc it covers ril/sim connections
This isn't 100% perfect but it is a good place holder for sending info and it has a scrubber to clear off personal data. But it takes longer.
SykkNyzz said:
Check out "SysLog"
https://play.google.com/store/apps/details?id=com.tortel.syslog
This is a quick way to pull a log for people without quick access to a PC. Just tick modem bc it covers ril/sim connections
This isn't 100% perfect but it is a good place holder for sending info and it has a scrubber to clear off personal data. But it takes longer.
Click to expand...
Click to collapse
That's what I usually recommend and use when I want to get some logs away from my pc.
Sent from my Moto E (4) using XDA Labs
It's odd because I've gotten 3G to work without even touching a thing. 1 day I got no data and the next I'm suddenly connected. After flashing the test zip in the Aquarios thread, it stopped working. I reflashed the ROM in hopes it'll return but no luck so far
On the lineage ROM I get 3G when I reset network settings and enable and disable airplane mode for some reason. Not sure if any of you guys have experienced the same thing with that ROM. I will be tinkering with various things to see if anything comes from it.
savagevegeta said:
It's odd because I've gotten 3G to work without even touching a thing. 1 day I got no data and the next I'm suddenly connected. After flashing the test zip in the Aquarios thread, it stopped working. I reflashed the ROM in hopes it'll return but no luck so far
Click to expand...
Click to collapse
For future reference, please don't talk about a rom other then the one the thread is for. In reference to your AquariOS comment in the Lineage thread. It's kinda rude and against the rules.
Sent from my Moto E (4) using XDA Labs
ThatBunner said:
On the lineage ROM I get 3G when I reset network settings and enable and disable airplane mode for some reason. Not sure if any of you guys have experienced the same thing with that ROM. I will be tinkering with various things to see if anything comes from it.
Click to expand...
Click to collapse
I am on the stock rom of the unlocked Amazon version. Phone is on the Sprint Free Service for a year plan so I figured I would tinker around with *#*#DATA#*#* because I was trying to figure out if CA was enabled because it's the Qcom Snapdragon version. I tried changing the LTE Band Priority. Band 41 is strong in my area and I have a Magic Box which amplifies it to be useable indoors. When I changed the Band Priority the LTE signal COMPLETELY dropped. If I switch settings to 3G or 1x I'll get signal bars. When I first turn on the phone it will connect to LTE for less than a second and then completely drop.
I'm guessing when I changed the band setting (I may have made 1 small change on the APN screen but can't remember) that it made an edit to the APN, which seems impossible to get to the regular APN screen like you easily can with GSM carriers.
I'm a newbie but I've searched everywhere trying to find a fix without rooting (since I just got the phone a month ago it would be easier to get a warranty replacement at this point). Ultimately what I'm saying is that it seems whatever the issue you are having with the custom mod must be similar to what I accidentally did to my phone. Maybe that will help narrow down what exactly is triggering your phone to not have data. :cyclops:
If this is a "duh, we knew that already" I apologize in advance! I browse tons of threads on here but have never posted so I was thinking maybe my mistake could help figure out someone else's issue
amarc78 said:
For future reference, please don't talk about a rom other then the one the thread is for. In reference to your AquariOS comment in the Lineage thread. It's kinda rude and against the rules.
Click to expand...
Click to collapse
Ouch. Okay :/
Here is what I could muster for compare/contrast with a logcat @amarc78. hope it helps?
I wasn't home to add this note. But it was done with the same combo for the original alpha you sent me
SS:
One build I was using had mobile data problems and resetting the APN to default helped connect without manually putting in an APN maybe that might work for some.
SykkNyzz said:
SS:
Click to expand...
Click to collapse
Maybe the baseband being different can be the problem
[email protected] said:
Maybe the baseband being different can be the problem
Click to expand...
Click to collapse
I'm sure it is. This is all I could get out of a aosp-caf build.
Sent from my Moto E (4) using XDA Labs
amarc78 said:
I'm sure it is. This is all I could get out of a aosp-caf build.
Click to expand...
Click to collapse
Yeah, I was meandering btwn MVNO Slayer and MopedRyders R2 boost zip
---------- Post added at 05:30 PM ---------- Previous post was at 05:25 PM ----------
I also believe it may have something to do with ##SCRTN# in stock, then flashing over. Because going from Lineage with 1x to stock makes my phone go 3G only until I use ##SCRTN# then it fixes the data properly to LTE
(This has happened everytime with Amarc's Alpha Lineage OS)

Categories

Resources