Ringle Fusion Case Templates - OnePlus 2 Accessories

Hi guys! As you know, there are several printable diy case tutorials for the Oneplus One. However, I couldn't find any such threads for the Oneplus 2. I did however stumble upon this reddit thread: https://m.reddit.com/r/oneplus/comments/3ob07f/ringke_fusion_oneplus_two_case_cover_template/
Using the templates provided by the person on that thread and some Photoshop skills, I've made some printable templates. These can be directly printed on 4x6 photo paper (if you're using an A4 sized sheet, print two templates on one page for the desired size)
Note: These should only be used with the Ringke Fusion cases (you could get them on amazon). Smoke black or clear, any will do.
If you guys have any requests, please do post them here with high resolution images. I might take some time to do them, as I am a student after all
Here's the link to the templates that I have made:
https://www.dropbox.com/sh/zcub6jbb89xk47s/AADex7PgusqSAX9wBgJ4kQpGa?dl=0
Attached: What the real thing looks like once printed

Thank you for making these!
Did you made these as well? http://i.imgur.com/nNBcf14.jpg

id0 said:
Thank you for making these!
Did you made these as well? http://i.imgur.com/nNBcf14.jpg
Click to expand...
Click to collapse
Haha no these were made by the guy from that reddit post which I linked. I just used his template to make a few more for myself and thought I could share them with you guys

Could you please post a tutorial on how to use the templates? I tried but couldnt get the camera cut.

suneet mehta said:
Could you please post a tutorial on how to use the templates? I tried but couldnt get the camera cut.
Click to expand...
Click to collapse
Print the whole thing out on photo paper. Then use a craft knife to cut them out. Even cut out the white part for the camera. I use an X-Acto blade
It's very difficult to cut it out with scissors. You could use a small paper cutter though.

zoroarctic said:
Print the whole thing out on photo paper. Then use a craft knife to cut them out. Even cut out the white part for the camera. I use an X-Acto blade
It's very difficult to cut it out with scissors. You could use a small paper cutter though.
Click to expand...
Click to collapse
Yes I know the cutout part. I've done the same for a Nexus 5. But I use Gimp to make the template with the picture. But when i insert the picture the borders of the template are sent to the back. I cant see the camera cut. I used to do it somehow before for Nexus 5. But the same isn't working now. Could you post the software u use and the instructions how to use it for making the template. Because I want to make my own, not print the ones already available.

suneet mehta said:
Yes I know the cutout part. I've done the same for a Nexus 5. But I use Gimp to make the template with the picture. But when i insert the picture the borders of the template are sent to the back. I cant see the camera cut. I used to do it somehow before for Nexus 5. But the same isn't working now. Could you post the software u use and the instructions how to use it for making the template. Because I want to make my own, not print the ones already available.
Click to expand...
Click to collapse
I made those ones using Photoshop touch. Imported the stock template (link in OP) and then pasted that over the background picture I need. Then I cut out all the outer areas with the magic wand tool. I haven't really used Gimp before, I do all this from my phone
Photoshop touch isn't available on the market anymore, I think. You'll probably have to use Photoshop on your laptop if you don't have it on your phone.

The problem is, the template is too short. I've made one for myself too, but it's too short and I don't know how to modify it.

Folie17 said:
The problem is, the template is too short. I've made one for myself too, but it's too short and I don't know how to modify it.
Click to expand...
Click to collapse
Strangely, it was too short when I got it printed out on card paper from one stationary store. The second time I got it done (from a different store), it was printed out perfectly. I think the paper sizes are a bit different, but I really don't know too much either :/

HELLO..could you be so kind to create a template for ONEPLUS X as well?
cheers.

afiqradzi17 said:
HELLO..could you be so kind to create a template for ONEPLUS X as well?
cheers.
Click to expand...
Click to collapse
As I stated in the OP, I didn't make the base template. I got it from a reddit thread (I've put the link in the OP) and I just photoshopped it on some old wallpapers of mine to make printable sheets that I could use beneath my cover.
If you can find a Ringke Fusion template for your phone, I could help you add pictures to it using Photoshop.
To make your own template, you'd probably have to scan the stock template that you got with your cover and edit it in Corel Draw, which I have no knowledge of.
Sorry

Related

Spigen Ultra Hybrid Cutout Template

For anyone with the Spigen Ultra Hybrid case, you'll have noticed that the case came with two cutouts to cover the clear backing.
If anyone is interested in creating a custom back image, I have created a template (PSD) which you can just add your design in and print.
Simply put your design under the initial layer, align/fit your design to your liking and that's it!
An example has been attached as well as a zipped version of the PSD.
Enjoy
Sweet, I was gonna do this myself but you beat me to it.
Yadao said:
Sweet, I was gonna do this myself but you beat me to it.
Click to expand...
Click to collapse
Haha, yeah I looked around and couldn't find anyone who posted it online so I just made one myself. I got it near perfect, it's basically identical to the cutouts that come with the case. Off by a fraction of a mm if anything.
I was coming on here to share a similar template, but yours is great, good job.
Attached my phone's new skin.
there's a thread for this...
http://forum.xda-developers.com/showthread.php?t=2527376
but thanks DanJRWalsh!
cooooooop said:
I was coming on here to share a similar template, but yours is great, good job.
Attached my phone's new skin.
Click to expand...
Click to collapse
Nice design, looks good
palabook said:
there's a thread for this...
http://forum.xda-developers.com/showthread.php?t=2527376
but thanks DanJRWalsh!
Click to expand...
Click to collapse
Thanks for sharing, I searched it before posting but wasn't able to find it. Most likely because he used the term "backplate"
This one is way better.
DanJRWalsh said:
Nice design, looks good
Thanks for sharing, I searched it before posting but wasn't able to find it. Most likely because he used the term "backplate"
Click to expand...
Click to collapse
Yeah but this template is way better! The other one had multiple small problems.
brssnkl said:
Yeah but this template is way better! The other one had multiple small problems.
Click to expand...
Click to collapse
Could you please state the problems you had as the template i made has been updated to fix a lot of the known problems
ehcool said:
Could you please state the problems you had as the template i made has been updated to fix a lot of the known problems
Click to expand...
Click to collapse
Okay, theres the problems. i.imgur.com/ej9zi16.jpg
And this is 1 to 1 sized comparision with the real thing > i.imgur.com/3SpLBZm.jpg
And this is the comparision with DanJRWalsh's case > i.imgur.com/SerwmxD.jpg
But I like the idea of selling backplates on the ebay. I think you should find some company to cut them and print smt original on them.
Keep the good work.
brssnkl said:
Okay, theres the problems. i.imgur.com/ej9zi16.jpg
And this is 1 to 1 sized comparision with the real thing > i.imgur.com/3SpLBZm.jpg
And this is the comparision with DanJRWalsh's case > i.imgur.com/SerwmxD.jpg
But I like the idea of selling backplates on the ebay. I think you should find some company to cut them and print smt original on them.
Keep the good work.
Click to expand...
Click to collapse
Thanks for the feedback the reason those its are "rough" is because when the backplate is placed with the case they are not seen the and i can promise you when the backplate is printed out as is "windows printing issues aside" the template fits perfectly when cut out, So i hope i addressed the concerns you have
EDIT: I reviewed those images again and my original template looked the same on the pc screen as Dans one but when printed out the camera cutout was too far down this was the reason for me producing a new version of it with all the changes
Thanks for the Support anyway
Hey there,
Great work with the template, it fits perfectly in the case!
I took the freedom to modify the template a bit to include a printable border (for white designs) and a layer that shows the actual visible area of the back window.
Before printing remember to hide the "Visible Area" layer.
Also, all of the elements are saved as Patterns so you can modify or fill them the way you want.
The template is in GIMP .xcf format as I don't have PS.
Cheers
Thanks for the template, i was thinking of doing one myself, might stick a few on an a4 page and get them printed out in one go in high quality.
I messed around with one of the spare prints that came with mine and i stickerbombed it and trimed it for the camera and sides. Heres the results ill post my ones i get printed as soon as i do them up.
rastacre said:
Hey there,
Great work with the template, it fits perfectly in the case!
I took the freedom to modify the template a bit to include a printable border (for white designs) and a layer that shows the actual visible area of the back window.
Before printing remember to hide the "Visible Area" layer.
Also, all of the elements are saved as Patterns so you can modify or fill them the way you want.
The template is in GIMP .xcf format as I don't have PS.
Cheers
Click to expand...
Click to collapse
Hello, thanks to both (you and OP) for your work.
Is it possible to export your template to a photoshop format using gimp?
Edit: Autocorrect
awesome job man .. i tried and tried to get the other templet to work but had no luck. I stumbled across this thread and everything is working like a charm.
LuisLAN said:
Hello, thanks to both (you and OP) for your work.
Is it possible to export your template to a photoshop format using gimp?
Edit: Autocorrect
Click to expand...
Click to collapse
Hey there,
Here's mine in PDS format, which I exported from Gimp, but I have no clue how well it'll work on PS.
Cheers
View attachment N5.cover.template.V2.psd.zip
rastacre said:
Hey there,
Here's mine in PDS format, which I exported from Gimp, but I have no clue how well it'll work on PS.
Cheers
View attachment 2541947
Click to expand...
Click to collapse
Thanks. I'll make a test and you know how it went
Awesome template
DanJRWalsh said:
For anyone with the Spigen Ultra Hybrid case, you'll have noticed that the case came with two cutouts to cover the clear backing.
If anyone is interested in creating a custom back image, I have created a template (PSD) which you can just add your design in and print.
Simply put your design under the initial layer, align/fit your design to your liking and that's it!
An example has been attached as well as a zipped version of the PSD.
Enjoy
Click to expand...
Click to collapse
I just wanted to thank you so much for the template, it's great.
I've done some on my own now and I thought I should come back here and share them with everyone, so
I'm attaching a link to the google drive folder where I have the cut outs and also the psd file. Hope you like them, feel free to use and modify them as you wish.
https://drive.google.com/#folders/0ByMIGZCji5P-TXQtTllUNzRyb0U
This cutout is fantastic!! thank you!
here's a cuban flag for you
Hey guys can u please build me this template:
http://forum.xda-developers.com/showthread.php?p=51181882
Thanks in advance
Sent from my Nexus 5
Help bump
Sent from my Nexus 5

Share your Ringke fusion back prints.

I'm looking for creative and good looking prints for the clear back of the ringke fusion Nexus 5 case. Share yours!
Nice ! you get with the case the cards for printing on ?
Here's what I've done...
http://imgur.com/a/uTEen
tonybyatt said:
Here's what I've done...
http://imgur.com/a/uTEen
Click to expand...
Click to collapse
Cooool!
goproaccessory said:
Nice ! you get with the case the cards for printing on ?
Click to expand...
Click to collapse
No you don't get cards to print on, but you do get one plastic transparent template to help in cutting one out.
I was able to find websites that showed skin artwork for the iPhone. I guess I'll use them to print one out on paper and then cut it to nexus 5 size.
UberUrban said:
No you don't get cards to print on, but you do get one plastic transparent template to help in cutting one out.
I was able to find websites that showed skin artwork for the iPhone. I guess I'll use them to print one out on paper and then cut it to nexus 5 size.
Click to expand...
Click to collapse
Mind sharing the link? Wasn't having any luck finding anything.
What about taking a nexus 5 wallpaper? I am thinking to do a kodak print and cut it to size accordingly.. Does a normal paper hold well?
Sent from my Nexus 5 using xda app-developers app
pinoymutt said:
Mind sharing the link? Wasn't having any luck finding anything.
Click to expand...
Click to collapse
Sure. This is the best one I found. Has a lot of good ones. :good:
vinod.20r said:
What about taking a nexus 5 wallpaper? I am thinking to do a kodak print and cut it to size accordingly.. Does a normal paper hold well?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Well, in this official ringke video they use a cutout from a magazine. So I think normal paper should hold.
So if anyone is interested, I've attached a word file (not pdf, in case you want to edit) containing some images of back prints I liked on the website I mentioned earlier. These images were resized and cropped to match the dimensions of the Ringke Fusion Nexus 5 case, although I haven't printed and tested any of them yet. This should save a lot of your time. :good:
If you do print them, let us know here if they fit well. :highfive:
I remember seeing a template for the Fusion case but I cant find it anymore. Does anyone know where it might be?
EDIT: Someone else sent me a link... Thanks anyways
salonluden said:
I remember seeing a template for the Fusion case but I cant find it anymore. Does anyone know where it might be?
EDIT: Someone else sent me a link... Thanks anyways
Click to expand...
Click to collapse
I want it too.
can you also send me ?
thx!
prowede said:
I want it too.
can you also send me ?
thx!
Click to expand...
Click to collapse
Here's the attachment... Just don't give me the credit for it I didn't make it.
FYI when I tried printing I had to cut off more from the bottom than the cutout shows so make sure you don't have anything important down there
Enjoy and share!
By the way I made a cute geeky back if anyone wants (attached)
salonluden said:
Here's the attachment... Just don't give me the credit for it I didn't make it.
FYI when I tried printing I had to cut off more from the bottom than the cutout shows so make sure you don't have anything important down there
Enjoy and share!
Click to expand...
Click to collapse
I made that template, thanks for not just taking credit of it . Here is the original thread, if anyone need instructions. http://forum.xda-developers.com/showthread.php?t=2607766
I'll share my prints as soon as i get home.
DeGygii said:
I made that template, thanks for not just taking credit of it . Here is the original thread, if anyone need instructions. http://forum.xda-developers.com/showthread.php?t=2607766
I'll share my prints as soon as i get home.
Click to expand...
Click to collapse
Sorry I would have linked your post but all I had was the link to the attachment. Thanks for making it is can't wait to make tons more!
Great thread!
Sent from my Nexus 5 using Tapatalk 2
Printing Instructions?
Can anyone precisely tell me how to print this on an A4 size paper?
I have tried but it always comes shorter than it supposed to be.
Ashutosh1313 said:
Can anyone precisely tell me how to print this on an A4 size paper?
I have tried but it always comes shorter than it supposed to be.
Click to expand...
Click to collapse
i printed directly to printer with 100% scale, then it fits the actual case size.
prowede said:
i printed directly to printer with 100% scale, then it fits the actual case size.
Click to expand...
Click to collapse
I will try that. And let you know
Now I'm using this case for 3 months now....it has no sign of turning into yellow. But is has some scratches and dust which i cant remove...they appear when i use case without cutout on my white N5, plz help me out guys....really need help. I'm asking for a template which is balck and says 'NEXUS' in same font as actual font. Basically i want it to look like black nexus. Plz provide a cutout asap...

[DIY]Custom Ringke Fusion Backplate

Hey Guys
Ringke was so nice to include a plastic cutting tool to make diy backplates and customize our phones. the problem is that you have to trace it maually every time you make a new picture. so I made a photoshop template to solve this problem.
It is pretty simple to use.
first of all extract the zip file.
1. Open the Ringke_fusion_template.psd in photoshop (if you don't own photoshop, either use the demo version or gimp which is free and open source should work too).
2. Select the "Image" Layer.
3. Drag and drop the image you want to use into photoshop.
4. Now you can resize and move the image how you like (if you hold down the shift key while resizing, the image doesnt get stretched).
5. Hit the confirm Button on the top right.
6. Press Ctrl+P to print out the document.
Make sure that scale to fit media is unchecked and scale is set to 100%!
that's it, just cut it out along the black border. make sure you cut off all the black border to make it fit perfectly. If oyu need help just ask or refer to this thread (Basically the same just for the spigen).
Post some results
Ringke Fusion Pattern V2
I modify the templete for better understanding of the pattern.
do please see attach file.
Good stuff thanks
MinatoNamikaze said:
I modify the templete for better understanding of the pattern.
do please see attach file.
Click to expand...
Click to collapse
yeah i know i could have used a clipping mask but i wanted the background to be white if you insert an image with transparency so i thought this was just the easier method.
What are the odds of getting a nexus 4 template?
We have a thread for the Spigen one we should have a thread for people to upload ringke ones for people
Done
http://forum.xda-developers.com/nexus-4/accessories/ringke-fusion-diy-photoshop-template-t2759833
I have made some templates but haven't printed them since i don't have printer.I have modified template slightly to make it 4R photo print.I will be getting them as photo from print shop .Check out my templates here http://forum.xda-developers.com/goo...s/share-ringke-fusion-prints-t2547963/page3.I will add some more later.
---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------
Roxas598 said:
We have a thread for the Spigen one we should have a thread for people to upload ringke ones for people
Click to expand...
Click to collapse
We already have one http://forum.xda-developers.com/google-nexus-5/accessories/share-ringke-fusion-prints-t2547963
somebody have the psd for ringke with "Nexus" font hole ??
Nexus 5 Camera Hole Cutout
guys Can Some body help me in guiding me how to cut the camera hole perfectly cause mine goes shabby sometimes
Never mind, wrong forum.

Custom "BackCover-Inlay" for CASE-MATE Naked!

Hey Folks,
out of my own made misery i made "Mask" for easy backcover-inlay creation with the CASE-MATE Z1 Clear-Naked Case.
This is ONLY for this particular Case!!
It is a file in PNG format. Just open it with GIMP or PS ore similar and put ur pic on a 2nd layer behind my mask.
Move it to the correct position and save as bmp and so on and so on. There is a Tutorial in the PNG itself.
When doing/printing like said in the tut, it fits very well.
I have a picture of my phone, but pls remember, i cut it out really bad! I am at work right now and i only got bad scissors and so on.
Here is the Sample of my Phone:
https://www.dropbox.com/s/lxxtg9b7unvs5j3/DSC_0022.JPG
It's for free use. I made it myself and "TheRedTurkey" is my "GamerTag/Nick i use often. So don't missunderstand it plz. I did not steal it from anyone else!
Critics and comments are allowed and welcome
The PNG-File is attached
Cheers for this.
ScuzUK said:
Cheers for this.
Click to expand...
Click to collapse
Really nice, it's a real shame that the case has no magnetic charging port cutout, otherwise I would have purchased one.

Note10+ back cover template psd file, Where to find it ?

I have a transparent back cover for my Note 10+ and I'm looking for a PSD template to put a sticker or a drawing between cover and back of phone.
Does someone know where I can find this template with the good dimensions for the camera hole ?
Thanks
i actually just started thinking about doing this. Did a quick search online to see if anyone else had done one. Did you have any luck? If i cant find one, ill try to make one this week if you still need this.
i tried to find over the net but nothing
I am really interested if you can create it for the Note10+
Thanks in advance.
Try https://www.thingiverse.com/thing:4021955 is the closest that i've found.
Thanks but I don't want a 3D file for a cover but a 2D picture with holes for cameras to insert a picture or a photo between my transparent case and my phone.
Calimero Oeuf said:
I have a transparent back cover for my Note 10+ and I'm looking for a PSD template to put a sticker or a drawing between cover and back of phone.
Does someone know where I can find this template with the good dimensions for the camera hole ?
Thanks
Click to expand...
Click to collapse
Do you mean this? https://forum.xda-developers.com/showpost.php?p=81201503&postcount=9
Calimero Oeuf said:
I have a transparent back cover for my Note 10+ and I'm looking for a PSD template to put a sticker or a drawing between cover and back of phone.
Does someone know where I can find this template with the good dimensions for the camera hole ?
Thanks
Click to expand...
Click to collapse
Here, in "material & design", there is "print 3D model" - not sure how good it is though:
https://www.kimovil.com/en/where-to-buy-samsung-galaxy-note10-plus
mzsquared said:
Here, in "material & design", there is "print 3D model" - not sure how good it is though:
https://www.kimovil.com/en/where-to-buy-samsung-galaxy-note10-plus
Click to expand...
Click to collapse
No, we just have width and height of device, no camera hole positions
OK I did it by myself
View attachment 4922913 View attachment 4922915
Enjoy !
Please share yours !
is the mockup still available?

Categories

Resources